DJ Equipment 1318 Items

Reloop's compact headphones as deep black MK2 edition. The RH-2350 PRO MK2 are the ideal headphones for DJs who are on the road a lot. In spite of its marginal weight and small cups, the 2350 pushes a superb 102 dB out of its 40 mm large dynamic drivers that are the big secret to its power. Light, loud, and with a modern design.

FEATURES
• Professional DJ headphones, classic construction
• Excellent sound characteristics
• Very high output capacity thanks to 40 mm dynamic driver
• Excellent wearing comfort
• High-quality construction
• Very good foothold
• Marginal weight

TECHNICAL DATA
• Frequency range: 20 Hz – 20 kHz
• Sound pressure level: 102 dB
• Input impedance: 32 ohm
• Driver: 40 mm
• Cable: 3 m
• Connection: 6.3 mm jack
• Weight: 186 g

The RHP-10 Mono is the latest member of the Reloop headphones family, and the first devoted to one-ear monitoring. The single ear-cup construction is designed for fast cueing of a track which, thanks to the large driver, is also possible when the ambient noise levels are high. The ergonomically designed padded handle and the water-resistant ear pad made of artificial leather are intended to withstand demanding live applications. The sturdy XLR cable connection and supplied spiral cable further emphasise the professional approach, allowing for a clutter-free and reliable performance. For fans of one-ear monitoring the RHP-10 Mono is a true and dependable partner.

FEATURES
• Professional one-ear construction with 50 mm neodymium driver
• Ergonomically padded handle
• Swivel-mounted ear cup
• Water-resistant ear pad made of artificial leather
• Flat comfort construction: compact and light ear cup housing
• Sturdy XLR connection
• Excellent, individually adjustable wearing comfort
• 90° angle adapter for optimised cable routing

TECHNICAL DATA
• Frequency range: 30 Hz – 30 kHz
• Impedance: 24 ohms
• Acoustic pressure: 109 dB
• THD: < 0,2% at 1 kHz, 1 mW
• Rated input power: 300 mW
• Weight: 246 g
• Incl. large artificial leather bag for headphones and accessories & cable

REVOLUTIONARY NON-CONTACT TECHNOLOGY
The internationally lauded Innofader by Audio Innovate is now retro-fittable to all Reloop devices that are identified as „Innofader Compatible“.

MORE THAN 4 MILLION CYCLES: OPTIMIZED FOR THE HARDEST SCRATCHING APPLICATIONS
The RMX Innofader has been specially developed to give users an effortless, professional performance even under the most rigorous use in the toughest conditions. Audio Innovate‘s revolutionary non-contact technology has created a fader that is perfect for the needs of professional DJs. The RMX Innofaders are accurately calibrated and ready for immediate use in any compatible Reloop product; however, the performance can also be personalised with the added ability to fine-tune the Cut-in and Cut-out points.

EASY AND QUICK MOUNTING
The RMX Innofader represents the utmost quality throughout its design. The fader shaft is grounded to protect the integrity of the audio signal, and the design is tested to work for 4 million movement cycles – ensuring a long and reliable lifespan. The Reloop RMX Innofader is quick and easy to install on the professional RMX-22i/33i/60/80 and RMX-90 DVS mixers. Inside the box, a blue performance fader cap is included to complete the package.

FEATURES
• Revolutionary non-contact fader (mini Innofader by Audio Innovate)
• Designed to last more than 4 million cycles
• Quick mounting
• Cut-in and cut-out points can be calibrated
• Buttery smooth operating tension for perfect scratching
• Factory pre-calibrated for tight cut points
• 3-pin adapter cable for Reloop mixers included
• Fader shaft with brush grounding for even more reliable applications
• Compatible with Reloop RMX-22i/33i/44 BT/60/80/90 and all future Reloop products with INNOFADER compatible logo
• Incl. blue fader cap

TECHNICAL DATA
• Dimensions: 72 x 14.5 x 17 mm
• Weight: 26 g

Manual:
https://www.reloop.com/media/custom/upload/Reloop-Calibration_PDF_RMX_innofader_Web.pdf
https://www.reloop.com/media/catalog/product/pdf/2/3/4/234052_Reloop_IM.pdf

The new Magma CTRL-Case Push2 is specially designed to protect the new Ableton Push 2 unit. Crafted from durable and lightweight Durashock molded EVA foam and a water- rejecting polyester exterior, it is furthermore equipped with an adjustable (velcro) foam-kit that provides extra protection for all encoders, knobs and buttons.

FITS:

• Ableton Push 2
• Ableton Push

BASICS:

• Lightweight Durashock molded 5 mm EVA foam and polyester exterior shell
• Incl. high density egg foam to protect control knobs, faders and jog wheels
• Sturdy zipper and comfortable carrying handles
• Hand-luggage compatible
• Fits inside the MAGMA Rolltop III Backpack

SPECS:

• Outer measures: 40,5 x 33,5 x 7 cm
• Inner measures: 38,5 x 32 x 5 cm
• Weight: 0,9 kg
• Color: black/black (Item-No.: 47991 / EAN-Code: 4041212479914)

stand alone, foldable go-travel trolley recommended
for a total weight up to 35kg max.

please note:
this is not an airbag craftworks design or product
but it has been approved to work reasonably well
in combination with our chateau vinyl record bags.
the trolley does not include the chateau vinyl bag.
please order seperately.

_lightweight (1,4 kg)
_foldable & ultra compact
_light metal, adjustbale telescope handles
_compatible with chateau vinyl record bag & flight cover
_easy fixation with expandable straps
_roll the trolleys elastic straps around the chateau vinyl handle twice
for a stable connection

pictures: airbagcraftworks.com

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offers a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned, removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: water-repellent cotton
colour: black

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

FULLY AUTOMATIC HIFI-TURNTABLE

The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

The CS 429 has a fully adjustable tonearm. This provides the option to change the pickup in the future and to alter the trackingforce and anti-scating accordingly.

The internal rubber damping construction decouples the tonearm and platter from external vibrations. This very quiet platform pro-vides an excellent sound performance combined with precise, optical speed control.

DETAILS:
Plinth: Solid MDF
• MDF construction with internal vibration absorber
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• All functions can be fully automatic or manual
• Solid aluminum construction with ball-bearings
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Precise optical speed control
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 6,2 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-429_manual_V4_DE_EN.pdf

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

A creative performer looking for a professional, durable
case solution for the Wolfmix W1? Then look no further,
UDG developed a super light EVA Hardcase designed for
life on the road. Constructed from durable lightweight
compression moulded EVA material with a laminated
nylon exterior this case provides protection against drops,
scratches & liquids. Skilfully designed & moulded to fit the
Wolfmix W1, this case is perfect for the travelling creative
performers that needs to protect their equipment.
FEATURES
• Fits Wolfmix W1
• Cover main material 600D polyester with 5 mm EVA durashock
molded body
• Mesh compartment for power adapter, extra cables
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER
INNER
DIMENSION WIDTH HEIGHT DEPTH
WEIGHT
22.9 25.4 11.7
0.5 kg 1.1 lbs
9.0 10.0 4.6
CM
INCH
19.9 22.4 6.2
7.8 8.8 2.4
CM
INCH

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Single puck

Precision machined single record puck!

Fits all brands and types of turntables and places your 7“ vinyls exactly centrally on the turntable. Adapt it is made from non-magnetic metal, that makes it look first-class. Unlike cheap plastic solutions the Adapt it is unbreakable!

Features:
• Adaptor for use with 7-inch single records
• Locates record centrally on turntable
• No plastic - precision CNC-machined
• Non-magnetic aluminum
• Suitable for all brands and types of record players

Technical Specifications:
• Material: Aluminum, CNC twisted
• Diameter: 38 mm
• Height: 10 mm

High-tech lubricant for constant velocity

How to use Lube it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Lube it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some lube off your turntable to keep it looking clean.

Please only use Lube it for turntables like Elemental, Primary, T-Line, Essential, Debut, The Classic, Juke Box & X1/X2.
For inverted bearings like RPM Line, Xtension models and Signature Line please use Grease it.

Features:
• Helps a smooth movement
• Easy handling

Amount: 5 ml

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

RECORD LABEL PROTECTOR FOR CLEANING

Before cleaning the record, the label protector is screwed onto the record label from both sides so that it does not come into contact with water. In this way, record labels are preserved for a long time.

The tightly woven velvet on the brush surface is ideal for cleaning the sound grooves of the record and also enhances the cleaning effect. Fine dust adhering to the record is removed. In addition to the CL-120 velvet brush, a special brush is supplied to keep the cleaning surface of the brush clean.

The single adapter is made of high quality milled aluminum and ensures that the EP is centered on your turntable.

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Hear the vivid sound experience that music playback offers with Nagaoka's MP-110 tonearm. Especially in the high-frequency range, the elliptical needle cut ensures better detail resolution. This creates a live atmosphere while listening, which is otherwise known from concerts.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel Separation (1kHz): >23dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P110
• Cartridge type: without head shell

ATH-CKS50TW
ATH-CKS50TW truly wireless headphones combine advanced acoustic technology for stunning bass with a comfortable and secure fit, while a high-capacity battery provides up to 20 hours of powerful, continuous audio (up to 50 hours with the charging case). All you have to do is let the music take control.

The newly developed large-diameter drivers (9mm Solid Bass HD TWS drivers) deliver deep bass while the CKS50TW shape provides a snug fit - an important factor for truly wireless headphones as the airtight fit prevents the bass from escaping to deliver a unique and intimate music experience.

Make your voice heard with Qualcomm® cVc™ Generation 8.0
Enjoy improved microphone performance in calls, whether in the office, working from home or in an online class. The sidetone function of the CKS50TW also allows you to hear your own voice during calls for more natural-sounding conversations, feeling almost as if you weren’t wearing headphones at all.

Built-in button design for on-the-go operation
Audio-Technica’s ATH-CKS50TW wireless earbuds are designed for reliable, stress-free operation for a more enjoyable truly wireless listening experience. The left button adjusts the volume and switches between hear-through and noise-cancelling functions, while the right button lets you easily start/stop playback, skip between songs, or enable quick hear-through.

Rain and splash-proof design
The CKS50TW wireless earbuds boast an IPX4*-equivalent JIS protection rating. The splash-proof design means you never have to worry about keeping your truly wireless earbuds dry in sudden rain showers or when exercising.

*An IPX4-equivalent rating signifies the product will not be adversely affected by water splashing from any direction. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof.

Greater customization
Personalize the operation of your Audio-Technica earbuds via Audio-Technica’s Connect app, available from both Apple and Google Play. Take full control of your sound, switching between codecs, experimenting with equalizer pre-sets or adjusting your volume levels. You can even use the app to help locate your earbuds, so you’ll always have a stunning soundscape to accompany your day to day.

Interruption-free listening

Packed full of useful functions, the CKS50TW earbuds are compact, with a unique antenna structure designed to ensure stable connectivity while fitting in limited space. This helps prevent sound from being interrupted even in train stations or other crowded locations.

The ATH-CKS50TW earbuds also feature Qualcomm® TrueWireless Mirroring.

Independent transmission to the left and right sides reduces sound interruptions and delays for videos on all devices, including Android and iOS smartphones.

Automatic power-on and fast pair convenience

Once paired with your device, Audio-Technica’s CKS50TW wireless headphones automatically turn on and connect to your Android or Google device** when they are removed from the case for quick usability. When the truly wireless earbuds are put back in the case, they power down and begin charging. The power can also be turned on/off directly from the headphones.

** Only one Android device can be paired by using Fast Pair. Google and Android are trademarks of Google LLC.

Check up on your charge with LED indicators

The CKS50TW’s four LED indicators light up or flash whenever the charging case is opened or closed, so the user can see the charging status or remaining charging case battery power at a glance.

Sony’s 360 Reality Audio certified

The combination of 360 Reality Audio and Audio-Technica’s long-cultivated acoustic technology allows listeners to fully experience the world of sound envisioned by the creators.

Features
Bluetooth® 5.2
50 hour battery (20 hours in the earbuds + 30 hours in the charging case)
Fast charging support - 10 minutes = 90 minutes of power (approx)
Multi-point pairing function for registering multiple devices
9mm Solid Bass HD TWS drivers
Noise-cancelling mode
Hear-through function
Built-in mic and controls
IPX4
Qualcomm® cVc™ Generation 8.0
Qualcomm® TrueWireless Mirroring
SCMS-T protected content and 1seg broadcasting support
Voice guidance function*1
Compatible with Sony’s 360 Reality Audio*2
*1 Voice guidance can be used for notifications, including power and pairing statuses as well as remaining battery level (High, Medium, or Low).
*2 Requires use of subscription to compatible online music service – subscription fees may apply. Compatible services may not be available in certain countries/regions. Please visit https://www.sony.net/360RA to check compatibility of the service. "SONY'' is a registered trademark of Sony Group Corporation.

Specifications
Headphones
Type Dynamic
Driver Diameter 9 mm
Frequency Response 5 to 20,000 Hz
Sensitivity 110 dB/mW
Impedance 20 ohms
Weight Headphones: Approx. 8 g (0.28 oz) (L side), approx. 8 g (0.28 oz) (R side); Charging case: Approx. 60 g (2.1 oz)
Charging Time Headphones: Approx. 3 hours
Charging case: Approx. 3 hours
The figures above depend on operating conditions.
Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
Operating Time Continuous transmission time (music playback): Max. approx. 20 hours (headphones), Max. approx. 50 hours (if charging case is used in combination)
The figures above depend on operating conditions.
Microphone Type MEMS type
Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
Microphone Frequency Response 100 to 8,000 Hz
Microphone Polar Pattern Omnidirectional
Power Supply Headphones: DC 3.7 V lithium ion battery
Charging case: DC 3.7 V lithium ion battery
Water-Resistant (drip-proof) Performance IPX4
Headphones only
Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips (XS, S, M, L)
Notes For product improvement, the product is subject to modification without notice.
Bluetooth®
Bluetooth® Version Bluetooth version 5.2
Operating Range Line of sight - approx. 10 m (33')
Maximum RF Output 10 mW EIRP
Frequency Band 2.402 GHz to 2.480 GHz
Modulation Method GFSK, Pi/4DQPSK, 8DPSK
Spread Spectrum Method FHSS
Compatible Bluetooth Profiles A2DP, AVRCP, HFP
Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
Supported Content Protection Method SCMS-T
Supported Sample Rates 44.1 kHz, 48 kHz
Supported Bit Rates 16 bit, 24 bit
When using Qualcomm® aptX™ Adaptive audio.
Transmission Band 20 to 20,000 Hz

Flair for your vinyl. Slide one of our weighted 45 rpm adaptors onto the spindle of your turntable to play your favorite 7”. The heavy duty enameled metal disc comes packaged in our custom muslin pouch, perfect for toting along to a party or your next spin session.

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

The Eric B. & Rakim Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Missy Elliot "Classic Press Shot" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Tupac Shakur "West Coast" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The OP Art 7 Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Mr Bongo "Brazil 45" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

PROS
•Modern turntable
•Bluetooth
•33 or 45 RPM

PRODUCT INFORMATION
•The Lenco LBT-188 is a turntable with Bluetooth functionality. Connecting this turntable to your Bluetooth speaker is child’s play. The ideal set-up for enjoying a full and warm sound while lounging on your couch at home. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your vinyl record at the right speed.

•The LBT-188 from Lenco features a metal turntable, belt drive, an RCA connection and a tone arm with a counterweight. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it against knocks. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003117
•Product height: 12.40 cm
•Product depth: 34.40 cm
•Product width: 41.70 cm
•Number of RCA outputs: 2
•12V car: Yes
•Power option: Power on/off switch
•USB connectors: USB A
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902041139
•Amplifier options: Includes (pre) amplifier
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 5 W

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

MIKE D, MCA & AD-ROCK of BEASTIE BOYS' fame bringing the synergy of skateboarding & Hip Hop to urban street culture in New York City. The 12" slipmat features the bravado of the BEASTIES chilling with their skateboards in this turntable slipmat with a glazed bottom surface.

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

The UDG Creator Headphone Case is a large carrying bag for DJ headphones such as the Sennheiser HD 25-1.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

CNC milled to RIAA specs from solid aluminum available in seven stylish colors:

7 delicious flavor's - Lime, Onyx, Cherry, 24K, Grape, Alloy, Blueberry

Made in the USA in New York City.

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!