DJ Equipment 319 Items

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

OP–Z is a portable 16-track multimedia synthesizer and sequencer with a range of sample and synthesis based sounds. sequence music, visuals, lights and more, all from your OP–Z. iOS and android companion app available.

• preloaded with 16 sample packs, each containing 24 samples
• 12 synthesis based sound engines, for a wide range of sound
• 2 separate fx-buses, shared across all instrument tracks
• fx include delay, reverb, chorus and more
• image, 3D graphics and DMX light sequencing
• dimensions: 212,5 x 57,5 x 10 mm
• weight: 180 g

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Intuitive Smart Features and Elegant Design

Compact yet powerful 6mm drivers and a special acoustic structure with active noise cancellation deliver clear sound wirelessly — wherever your busy day takes you. Seamless device switching and crisp call clarity in a comfortable design – you won't miss a beat.

Elegant & All-Day Comfort Design
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.
Low-profile design for comfort throughout the day, and balanced to stay put – even when you're on the go.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Clear and detailed sound delivered wirelessly through the unique acoustic chamber, harmoniser, and compact 6mm drivers. Compatible with LDAC™ high-res wireless audio.*
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Sound Clarity
Enjoy pure sound. The Feed Forward Mic captures environmental sound and Digital Processing removes noise in addition to Passive Noise cancelling with the earplug effect.

Never miss a beat.

Intuitive Smart Features

Beamforming Technology
Clear calls using Beamforming Technology to capture and transmit your voice clearly despite surrounding noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 5.5 hours* playback with ANC on, 18 hours back-up with the case. Quick charge for 15 minutes will give you 60 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Clear rich sound from a unique acoustic chamber, harmonizer, and 6mm drivers.
• Pure Sound from Active Noise Cancelling with a Feed Forward Mic.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• Clear calls using Beamforming Technology to capture and transmit your voice.

Technical Data:
GENERAL
• Driver Unit (mm): 6 mm (1/4 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 3.5 hours (NC ON)
- Approx. 4.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 12 hours (NC ON)
- Approx. 14 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 5.5 hours (NC ON)
- Approx. 7.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 18 hours (NC ON)
- Approx. 24 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: -
- Earphones with Charging case / USB: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: -

• Quick Charge (15 minutes, AAC)
Earphones:
- Approx. 60 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9.5 hours (NC ON),
- Approx. 20 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 22 mm x 26 mm x 24 mm
- Approx. 7/8 inch x 1 inch x 15/16 inch
Charging case:
- Approx. 68 mm x 33 mm x 28 mm
- Approx. 2-11/16 inch x 1-5/16 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 5 g (0.18 oz)
- Charging case: Approx. 35 g (1.2 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS, S, M, L (M attached)

Advanced Function
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes(Feed-Forward only)

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Intuitive Smart Features and Elegant Design

Compact yet powerful 6mm drivers and a special acoustic structure with active noise cancellation deliver clear sound wirelessly — wherever your busy day takes you. Seamless device switching and crisp call clarity in a comfortable design – you won't miss a beat.

Elegant & All-Day Comfort Design
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.
Low-profile design for comfort throughout the day, and balanced to stay put – even when you're on the go.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Clear and detailed sound delivered wirelessly through the unique acoustic chamber, harmoniser, and compact 6mm drivers. Compatible with LDAC™ high-res wireless audio.*
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Sound Clarity
Enjoy pure sound. The Feed Forward Mic captures environmental sound and Digital Processing removes noise in addition to Passive Noise cancelling with the earplug effect.

Never miss a beat.

Intuitive Smart Features

Beamforming Technology
Clear calls using Beamforming Technology to capture and transmit your voice clearly despite surrounding noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 5.5 hours* playback with ANC on, 18 hours back-up with the case. Quick charge for 15 minutes will give you 60 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Clear rich sound from a unique acoustic chamber, harmonizer, and 6mm drivers.
• Pure Sound from Active Noise Cancelling with a Feed Forward Mic.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• Clear calls using Beamforming Technology to capture and transmit your voice.

Technical Data:
GENERAL
• Driver Unit (mm): 6 mm (1/4 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 3.5 hours (NC ON)
- Approx. 4.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 12 hours (NC ON)
- Approx. 14 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 5.5 hours (NC ON)
- Approx. 7.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 18 hours (NC ON)
- Approx. 24 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: -
- Earphones with Charging case / USB: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: -

• Quick Charge (15 minutes, AAC)
Earphones:
- Approx. 60 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9.5 hours (NC ON),
- Approx. 20 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 22 mm x 26 mm x 24 mm
- Approx. 7/8 inch x 1 inch x 15/16 inch
Charging case:
- Approx. 68 mm x 33 mm x 28 mm
- Approx. 2-11/16 inch x 1-5/16 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 5 g (0.18 oz)
- Charging case: Approx. 35 g (1.2 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS, S, M, L (M attached)

Advanced Function
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes(Feed-Forward only)

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

From Work to Life, and Everything in Between.

Thanks to 8mm drivers, a special acoustic structure and category-leading noise cancellation, AZ60M2 give you a clear sound advantage – wherever your busy day takes you. With a comfortable design, seamless device switching and crystal-clear sound quality – you won't miss a beat.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Feel detailed rich, expansive sound from the uniquely designed acoustic chamber, harmoniser and 8mm drivers. Compatible with LDAC™ high-res wireless audio* for step-up sound.
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Listening with Noise Cancelling
Dual Hybrid Active Noise Cancelling tech using feedforward and feedback mics, plus analogue and digital processing – for uninterrupted category-leading hi-fi sound performance.
*Technics research using JEITA guidelines for true wireless noise cancelling headphones as of March 2023.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

Never miss a beat.

Superior Uninterrupted Sound & Smart Features

JustMyVoice™ Technology
8 separate mics plus advanced wind noise reduction, to isolate and amplify speech while minimising background noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 7 hours* playback with ANC on, 24 hours back-up with the case. Quick charge for 15 minutes will give you 70 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Quality Materials
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Easy Qi Wireless Charging
Simple fast wireless charging by placing the earphone case on a compatible charger.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Feel ultra-rich, expansive sound delivered from the unique design of the acoustic chamber, harmoniser and 8mm drivers.
• Dual Hybrid Noise Cancelling with feedforward & feedback mics, plus analogue & digital processing – a hi-fi experience.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• JustMyVoice™ Technology with 8 mics & advanced wind suppression, to isolate speech from background noise for clearer calls.

Technical Data:
GENERAL
• Driver Unit (mm): 8 mm (5/16 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 4.5 hours (NC ON)
- Approx. 5.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 16 hours (NC ON)
- Approx. 17 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 7.0 hours (NC ON)
- Approx. 7.5 hours (NC OFF)
Earphones with Charging case:
- Approx. 24 hours (NC ON)
- Approx. 25 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: Approx. 3.5 hours
- Earphones with Charging case: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: Approx. 3.5 hours

• Quick Charge (15 minutes, AAC)
Earphones
- Approx. 70 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9 hours (NC ON),
- Approx. 15 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 23 mm x 26 mm x 28 mm
- Approx. 7/8 inch x 1 inch x 1-1/8 inch
Charging case:
- Approx. 73 mm x 38 mm x 28 mm
- Approx. 2-7/8 inch x 1-1/2 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 7 g (0.25 oz)
- Charging case: Approx. 45 g (1.6 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS1, XS2, S1, S2, M, L, XL (M attached)

Advanced Function:
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

From Work to Life, and Everything in Between.

Thanks to 8mm drivers, a special acoustic structure and category-leading noise cancellation, AZ60M2 give you a clear sound advantage – wherever your busy day takes you. With a comfortable design, seamless device switching and crystal-clear sound quality – you won't miss a beat.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Feel detailed rich, expansive sound from the uniquely designed acoustic chamber, harmoniser and 8mm drivers. Compatible with LDAC™ high-res wireless audio* for step-up sound.
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Listening with Noise Cancelling
Dual Hybrid Active Noise Cancelling tech using feedforward and feedback mics, plus analogue and digital processing – for uninterrupted category-leading hi-fi sound performance.
*Technics research using JEITA guidelines for true wireless noise cancelling headphones as of March 2023.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

Never miss a beat.

Superior Uninterrupted Sound & Smart Features

JustMyVoice™ Technology
8 separate mics plus advanced wind noise reduction, to isolate and amplify speech while minimising background noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 7 hours* playback with ANC on, 24 hours back-up with the case. Quick charge for 15 minutes will give you 70 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Quality Materials
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Easy Qi Wireless Charging
Simple fast wireless charging by placing the earphone case on a compatible charger.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Feel ultra-rich, expansive sound delivered from the unique design of the acoustic chamber, harmoniser and 8mm drivers.
• Dual Hybrid Noise Cancelling with feedforward & feedback mics, plus analogue & digital processing – a hi-fi experience.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• JustMyVoice™ Technology with 8 mics & advanced wind suppression, to isolate speech from background noise for clearer calls.

Technical Data:
GENERAL
• Driver Unit (mm): 8 mm (5/16 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 4.5 hours (NC ON)
- Approx. 5.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 16 hours (NC ON)
- Approx. 17 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 7.0 hours (NC ON)
- Approx. 7.5 hours (NC OFF)
Earphones with Charging case:
- Approx. 24 hours (NC ON)
- Approx. 25 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: Approx. 3.5 hours
- Earphones with Charging case: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: Approx. 3.5 hours

• Quick Charge (15 minutes, AAC)
Earphones
- Approx. 70 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9 hours (NC ON),
- Approx. 15 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 23 mm x 26 mm x 28 mm
- Approx. 7/8 inch x 1 inch x 1-1/8 inch
Charging case:
- Approx. 73 mm x 38 mm x 28 mm
- Approx. 2-7/8 inch x 1-1/2 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 7 g (0.25 oz)
- Charging case: Approx. 45 g (1.6 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS1, XS2, S1, S2, M, L, XL (M attached)

Advanced Function:
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

From Work to Life, and Everything in Between.

Thanks to 8mm drivers, a special acoustic structure and category-leading noise cancellation, AZ60M2 give you a clear sound advantage – wherever your busy day takes you. With a comfortable design, seamless device switching and crystal-clear sound quality – you won't miss a beat.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Feel detailed rich, expansive sound from the uniquely designed acoustic chamber, harmoniser and 8mm drivers. Compatible with LDAC™ high-res wireless audio* for step-up sound.
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Listening with Noise Cancelling
Dual Hybrid Active Noise Cancelling tech using feedforward and feedback mics, plus analogue and digital processing – for uninterrupted category-leading hi-fi sound performance.
*Technics research using JEITA guidelines for true wireless noise cancelling headphones as of March 2023.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

Never miss a beat.

Superior Uninterrupted Sound & Smart Features

JustMyVoice™ Technology
8 separate mics plus advanced wind noise reduction, to isolate and amplify speech while minimising background noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 7 hours* playback with ANC on, 24 hours back-up with the case. Quick charge for 15 minutes will give you 70 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Quality Materials
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Easy Qi Wireless Charging
Simple fast wireless charging by placing the earphone case on a compatible charger.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Feel ultra-rich, expansive sound delivered from the unique design of the acoustic chamber, harmoniser and 8mm drivers.
• Dual Hybrid Noise Cancelling with feedforward & feedback mics, plus analogue & digital processing – a hi-fi experience.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• JustMyVoice™ Technology with 8 mics & advanced wind suppression, to isolate speech from background noise for clearer calls.

Technical Data:
GENERAL
• Driver Unit (mm): 8 mm (5/16 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 4.5 hours (NC ON)
- Approx. 5.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 16 hours (NC ON)
- Approx. 17 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 7.0 hours (NC ON)
- Approx. 7.5 hours (NC OFF)
Earphones with Charging case:
- Approx. 24 hours (NC ON)
- Approx. 25 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: Approx. 3.5 hours
- Earphones with Charging case: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: Approx. 3.5 hours

• Quick Charge (15 minutes, AAC)
Earphones
- Approx. 70 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9 hours (NC ON),
- Approx. 15 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 23 mm x 26 mm x 28 mm
- Approx. 7/8 inch x 1 inch x 1-1/8 inch
Charging case:
- Approx. 73 mm x 38 mm x 28 mm
- Approx. 2-7/8 inch x 1-1/2 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 7 g (0.25 oz)
- Charging case: Approx. 45 g (1.6 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS1, XS2, S1, S2, M, L, XL (M attached)

Advanced Function:
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

Premium Class Speaker System

Advanced Phase Precision Driver
To reproduce music with enhanced spatial sound expressivity requires that the wavefronts of sounds radiated from the speaker unit are all aligned regardless of the listening position. The concept of point sound source is one of the ideal approaches to achieve it.
To realise the point sound source reproduction, the coaxial configuration was adopted and then it was combined with the originally shaped Linear Phase Plug for aligning phases and the Smooth Flow Diaphragm formed with a shallow-shape diaphragm and smooth edge shape for minimum sound reflection. The result is a spherical wave with aligned wavefronts of radiated sounds.
The SB-C600’s 2-way coaxial speaker unit realises clear sound image localisation and a smooth, high-quality sound, rich of emotion, while inheriting the concepts of point sound source and linear phase that Technics pursues relentlessly.

Linear Phase Plug
The originally shaped acoustic plug is positioned on the front side of the tweeter diaphragm and provides a high-resolution sound reproduction capability and a wide sound stage.

Smooth Flow Diaphragm
If the sound wave has irregularities on its sound transmitting surface, its wavefront becomes disturbed by the shapes of the irregularities, resulting in the degradation of frequency characteristics. High frequencies that have short wavelengths tend to be more susceptible to the degradation of sound characteristics. The woofer diaphragm in the coaxial speaker unit has a shallow shape and smooth edge to reduce sound reflection. The result is minimal disturbance of the wavefronts of sound waves radiated from the diaphragm to realise excellent frequency response and phase characteristics as well as wide directivity.
This configuration achieves a wide sound stage and smooth and rich mid- to high-frequency range.

Smooth Flow Port
A bass reflex port with an ordinary shape produces a large air current vortex that induces annoying high-frequency noise. Technics employed the airflow control method utilised for airplane wings and designed the cross-sectional shape of the port using flow analysis. The optimally designed port shape does not cause airflow disturbance at the opening and ensures high-quality bass reproduction with minimum noise and superb response.

Stationary Construction
It thoroughly removes undesirable or unwanted sounds and reproduces only the intended sounds with a high signal-to-noise ratio. The “Balanced Driver Mount Architecture” used in the grand class SB-G90M2 has been optimized for this model by making full use of CAE (Computer Aided Engineering). In addition, the speaker mount baffle that holds the speaker units in place has been newly designed to strengthen the rigidity of the entire cabinet. The combination of these factors maximizes the advantages of the gravity center mount structure. The rigidity and shape of each part that makes up the coaxial speaker unit has been carefully studied to eliminate unnecessary vibration and noise.

Balanced Driver Mounting Architecture
To realise a calm and low-distortion sound, the SB-C600 employs a speaker mount baffle created by optimising the low-resonance, high-rigidity design concept of the SB-G90M2 using CAE.
The originally shaped speaker mount baffle keeps the concentration of stress in check. The speaker mount baffle secures enough vent holes to ensure smooth flow of sounds radiated from the back sides of the speaker units and improve the response while maintaining low resonance and high rigidity. In addition, this structure reduces the vibrations of the entire enclosure and minimises the effects on other equipment.

High Quality Parts
The network circuit uses high-quality parts, such as polypropylene film capacitors, OFC wires and more. The speaker terminals are made of brass.

All Aluminium Diaphragms
The woofer and tweeter diaphragm are made of alumite-treated aluminium material for a unified tonal quality, and provides balanced sound like a full-range unit.

Highly Analysed and Optimised Components
To achieve accurate sound image localisation, structural parts such as spacers and wire grommets were analysed extensively for the elimination of undesirable vibrations and noise.

Matte Black Finish
The front baffle of the SB-C600’s enclosure is coated with a matte paint mixed with a powder for a beautiful matte finish.

Specs:
• Advanced Phase Precision Driver with Linear Phase Plug
• Smooth Flow Diaphragm
• Silent Construction with Balanced Driver Mounting Architecture
• Smooth Flow Port
• Highly Analysed and Optimised Components
• High Quality Parts for High-purity Sound

Technical Data:
• Type: 2-way 2-speaker Bass Reflex (Coaxial 2-way Woofer/built-in tweeters)
• Speaker Units: Woofer / Tweeter: 15 cm (6") Cone type x 1 / 2.5 cm (1") Dome type x 1
• Impedance: 4Ω
• Input Power (IEC): 60W (Rated), 120 W (Max)
• Recommended Amp Power: 40- 120 W (Speaker tested by IEC60268-5 Short Term Max Test)
• Sound Pressure Level: 83 dB / 2.83 V (m) / 80 dB / W(m)
• Frequency Range: 40Hz - 100kHz (-10dB)
• Crossover Frequencies: 2kHz
• Dimensions (W x H x D): 173 mm × 293 mm × 283 mm (Include net 8mm and terminal 15mm)
• Weight: Approx. 6.3 kg
• Accessories: Speaker Cable x2*¹, Owner's Manual x1
*1 Length of the speaker cable may not be sufficient on your placement. Please prepare suitable cable based on your installation requirements.

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Wireless Headphones with Noise Cancelling and Microphone

A Heritage of Excellence. Indulge in Superior Sound.

Backed by Technics’ legendary sound quality, EAH-A800 headphones feature superior audio, exceptional over-the-ear comfort, and sparkling call clarity for home, work, and travel. Unleash a true high-fidelity sound experience in comfortable headphones.

Hear Every Detail
A clear, immersive sound experience with a sense of range and depth. The PEEK/Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.　LDAC™ high resolution wireless audio* for uncompromised sound quality.
*Delivered in 96 kHz/24 bit LDAC when connected by Bluetooth®.

Speak with Clarity
With 8 distinct mics and advanced wind noise reduction, EAH-A800 transmits your voice clearly on each call; 4 Mic Beamforming and Noise Suppression* Technology isolates and amplifies words while minimizing surrounding noise.
*Varying environmental conditions may affect performance.

Immerse Yourself in Sound
With industry-leading* noise cancelling, EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
*As of Oct 31, 2021, According to research by Panasonic Corporation, measured using JEITA-compliant guidelines in the over-ear style noise cancelling headphones market.

Comfort Fit for Your Every Move
Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Control the Sound Around You

Transparent Mode
Transparent mode comprehensively captures voices and other surrounding sounds, leading to a more natural sound similar to not wearing headphones at all. Captures wide range of sound from low to high frequencies.

Attention Mode
Attention mode reduces unwanted external noise to make it easier to hear people‘s voices. It’s perfect when you need to hear airport announcements, etc.

Personalized Your Sound for All-Day Wear

Technics Audio Connect App*
New Technics Audio Connect app* makes pairing easy, helps tailor noise cancelling and sound mode settings to your exact specifications.
*Compatible with smartphones and tablets that are equipped with Android™ 6.0 or higher and that support Google Play, or an iPhone®, iPad® and iPod Touch® equipped with iOS 12 or higher.

Industry-Leading* Long Battery Life
Get up to 50 hours on a single charge with ANC on, with quick charge of 15 minutes for 10 hours of playback; Wearing Sensor for auto shut-off; folds easily to place in compact carrying case.
*As of Oct 31, 2021, According to research by Panasonic Corporation, based on published playback time (AAC, NC ON) in the over-ear style noise cancelling headphones market.

Seamless Device Switching with Multipoint Pairing

Automatic switching of devices
Multipoint pairing allows you to be connected to two Bluetooth® devices at the same time. With the latest firmware update, LDAC connections are also enabled for Multipoint pairing*.
*Requires the latest version of the Technics Audio Connect App.

Simultaneous pairing with PC and smartphone
If you receive a call on your smartphone while watching a video on your PC*, you can start speaking without having to manually switch between your smartphone and PC.
*Depending on the video playback software, the seamless switch may not activate.

Simultaneous pairing with two smartphones or tablets
When a call on your smartphone ends, you do not have to manually switch back to the other device used for music or video playback.

Convenient Functions

Multi-pairing
Multi-pairing is compatible with the latest version of Bluetooth® technology (Ver. 5.2) and can be used with up to 10 devices.

Wearing Playback Sensor
When the headphones are removed from your head, music stops. When they are put back on your head within 60 seconds, music resumes. Comfortable, seamless operation.

Voice Assistants
You can launch smartphone voice function to select music, adjust the volume, and make phone calls, with your voice.

8 High-performance MEMS microphones

Specs:
• A clear, immersive sound experience with a sense of range and depth. The PEEK/ Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.
• With 8 mics and wind noise reduction, EAH-A800 offers superior call quality provided by 4 Mic Beamforming and Noise Suppression Technology to clearly convey your voice to listener.
• EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
• Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Technical Data:
GENERAL
• Driver Unit (mm): 40 mm (1-9/16 in)
• Impedance: 34Ω
• Sensitivity: 105 dB/mW @1kHz
• Frequency Response (Power ON): 4 Hz -40k Hz
• Mic: Monaural, MEMS Mic
• Playback Time with Battery (LDAC):
- Approx. 40 hours (NC ON)
- Approx. 50 hours (NC OFF)
• Playback Time with Battery (AAC):
- Approx. 50 hours (NC ON)
- Approx. 60 hours (NC OFF)
• Charging Time (25°C/ 77°F): Approx. 3.0 hours (Using the power source 1200 mA or higher)
• Quick Charge (15 minutes, AAC): 10 hours (NC ON)
• Standby Time:
- Approx. 60 hours (NC ON),
- Approx. 120 hours (NC OFF)
*Auto power off : OFF
• Dimensions (W x H x D):
- Approx. 170 mm x 196 mm x 85 mm
- Approx. 6-11/16 inch x 7-11/16 inch x 3-3/8 inch
• Weight: Approx. 298 g (10.5 oz)
• Supplied Accessory:
- USB charging cord: Approx. 0.5 m (1.6 ft) (Input Plug : USB Type-A Shape, Output Plug : USB Type-C Shape)
- Detachable cord: Approx. 1 m (3.3 ft)

Advanced Function
• Bluetooth® Wireless Technology:
- Version: 5.2
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
• Dual Hybrid Noise Cancelling: Yes
• Bluetooth® Multipoint Pairing: Yes

Wireless Headphones with Noise Cancelling and Microphone

A Heritage of Excellence. Indulge in Superior Sound.

Backed by Technics’ legendary sound quality, EAH-A800 headphones feature superior audio, exceptional over-the-ear comfort, and sparkling call clarity for home, work, and travel. Unleash a true high-fidelity sound experience in comfortable headphones.

Hear Every Detail
A clear, immersive sound experience with a sense of range and depth. The PEEK/Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.　LDAC™ high resolution wireless audio* for uncompromised sound quality.
*Delivered in 96 kHz/24 bit LDAC when connected by Bluetooth®.

Speak with Clarity
With 8 distinct mics and advanced wind noise reduction, EAH-A800 transmits your voice clearly on each call; 4 Mic Beamforming and Noise Suppression* Technology isolates and amplifies words while minimizing surrounding noise.
*Varying environmental conditions may affect performance.

Immerse Yourself in Sound
With industry-leading* noise cancelling, EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
*As of Oct 31, 2021, According to research by Panasonic Corporation, measured using JEITA-compliant guidelines in the over-ear style noise cancelling headphones market.

Comfort Fit for Your Every Move
Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Control the Sound Around You

Transparent Mode
Transparent mode comprehensively captures voices and other surrounding sounds, leading to a more natural sound similar to not wearing headphones at all. Captures wide range of sound from low to high frequencies.

Attention Mode
Attention mode reduces unwanted external noise to make it easier to hear people‘s voices. It’s perfect when you need to hear airport announcements, etc.

Personalized Your Sound for All-Day Wear

Technics Audio Connect App*
New Technics Audio Connect app* makes pairing easy, helps tailor noise cancelling and sound mode settings to your exact specifications.
*Compatible with smartphones and tablets that are equipped with Android™ 6.0 or higher and that support Google Play, or an iPhone®, iPad® and iPod Touch® equipped with iOS 12 or higher.

Industry-Leading* Long Battery Life
Get up to 50 hours on a single charge with ANC on, with quick charge of 15 minutes for 10 hours of playback; Wearing Sensor for auto shut-off; folds easily to place in compact carrying case.
*As of Oct 31, 2021, According to research by Panasonic Corporation, based on published playback time (AAC, NC ON) in the over-ear style noise cancelling headphones market.

Seamless Device Switching with Multipoint Pairing

Automatic switching of devices
Multipoint pairing allows you to be connected to two Bluetooth® devices at the same time. With the latest firmware update, LDAC connections are also enabled for Multipoint pairing*.
*Requires the latest version of the Technics Audio Connect App.

Simultaneous pairing with PC and smartphone
If you receive a call on your smartphone while watching a video on your PC*, you can start speaking without having to manually switch between your smartphone and PC.
*Depending on the video playback software, the seamless switch may not activate.

Simultaneous pairing with two smartphones or tablets
When a call on your smartphone ends, you do not have to manually switch back to the other device used for music or video playback.

Convenient Functions

Multi-pairing
Multi-pairing is compatible with the latest version of Bluetooth® technology (Ver. 5.2) and can be used with up to 10 devices.

Wearing Playback Sensor
When the headphones are removed from your head, music stops. When they are put back on your head within 60 seconds, music resumes. Comfortable, seamless operation.

Voice Assistants
You can launch smartphone voice function to select music, adjust the volume, and make phone calls, with your voice.

8 High-performance MEMS microphones

Specs:
• A clear, immersive sound experience with a sense of range and depth. The PEEK/ Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.
• With 8 mics and wind noise reduction, EAH-A800 offers superior call quality provided by 4 Mic Beamforming and Noise Suppression Technology to clearly convey your voice to listener.
• EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
• Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Technical Data:
GENERAL
• Driver Unit (mm): 40 mm (1-9/16 in)
• Impedance: 34Ω
• Sensitivity: 105 dB/mW @1kHz
• Frequency Response (Power ON): 4 Hz -40k Hz
• Mic: Monaural, MEMS Mic
• Playback Time with Battery (LDAC):
- Approx. 40 hours (NC ON)
- Approx. 50 hours (NC OFF)
• Playback Time with Battery (AAC):
- Approx. 50 hours (NC ON)
- Approx. 60 hours (NC OFF)
• Charging Time (25°C/ 77°F): Approx. 3.0 hours (Using the power source 1200 mA or higher)
• Quick Charge (15 minutes, AAC): 10 hours (NC ON)
• Standby Time:
- Approx. 60 hours (NC ON),
- Approx. 120 hours (NC OFF)
*Auto power off : OFF
• Dimensions (W x H x D):
- Approx. 170 mm x 196 mm x 85 mm
- Approx. 6-11/16 inch x 7-11/16 inch x 3-3/8 inch
• Weight: Approx. 298 g (10.5 oz)
• Supplied Accessory:
- USB charging cord: Approx. 0.5 m (1.6 ft) (Input Plug : USB Type-A Shape, Output Plug : USB Type-C Shape)
- Detachable cord: Approx. 1 m (3.3 ft)

Advanced Function
• Bluetooth® Wireless Technology:
- Version: 5.2
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
• Dual Hybrid Noise Cancelling: Yes
• Bluetooth® Multipoint Pairing: Yes

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Serge Orange) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Serge Orange)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Keith Grey) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Keith Grey)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Introducing the CTRL CASE APC 64 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Akai APC 64 it is a very lightweight and convenient solution to carry the instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• AKAI APC 64

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 41 x 32 x 10 cm
• Inner measures: 37,5 x 28,5 x 9 cm
• Weight: 1,1 kg

Nightclub E Replacement stylus
Nightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.

Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.

It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.

The special elliptical stylus guarantees sound with insignificant scratching.

Nightclub E Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommmende tracking force - 65 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

Ortofon Record Stabilizer Heavy - Silver - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning creative performers. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam, which allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for Pioneer PLX-CRSS12 and creating another slot beside for cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Case Pioneer PLX-CRSS12 is designed to keep your Pioneer PLX-CRSS12 protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES

Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Pick & pluck foam
• Two side strong butterfly lock
• Rubber feet at the bottom for support in standing position

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle
• Removable access panel

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 4,30 kg / 9.46 lbs
• Outer Dimensions (W x H x D): 49.0 x 42.3 x 21.0 cm | 19.3 x 16.6 x 8.3 inch
• Inner Dimensions (W x H x D): 47.0 x 40.5 x 18.8 cm | 18.5 x 15.9 x 7.4 inch
• Material: Aluminum

The Ramones "Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Adjustable laptop shelf
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover
• Removable front access panel

Fits:
• Pioneer DDJ-REV5 controller

Specifications:
• Weight: 15,80 kg / 34.76 lbs
• Outer Dimensions (W x H x D): 84.4 x 51.5 x 24.3 cm | 33.2 x 20.3 x 9.5 inch
• Inner Dimensions (W x H x D): 73.8 x 36.2 x 5.5 cm | 29.1 x 14.3 x 2.2 inch
• Material: Heavy duty construction of 9 mm thick plywood

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Right & left side removable access panel
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 9,00 kg / 19.8 lbs
• Outer Dimensions (W x H x D): 51.1 x 42.6 x 23.0 cm | 20.1 x 16.7 x 9.1 inch
• Inner Dimensions (W x H x D): 45.6 x 38.6 x 7.8 cm | 17.9 x 15.2 x 3.1 inch
• Material: Heavy duty construction of 9 mm thick plywood

The Bundle contains 3x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

A Digital DJ/ Producer looking for a professional, durable case solution for your NI Traktor X1 MK3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor X1 MK3, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Black soft fleece interior
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• NI Traktor X1 MK3

Specifications:
• Weight: 0,43 kg / 0.946 lbs
• Outer Dimensions (W x H x D): 33.8 x 14.4 x 6.8 cm | 13.3 x 5.7 x 2.7 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam

A Digital DJ looking for a professional, durable case solution for your Pioneer PLX-CRSS12 turntable? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer PLX-CRSS12 turntable, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Water repellent laminated nylon exterior
• Removable top-bottom egg crate foam prevent damage from vibrations and shocks
• Black soft fleece interior

Extra's:
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 2,35 kg / 5.17 lbs
• Outer Dimensions (W x H x D): 52.5 x 43.5 x 21.0 cm | 20.7 x 17.1 x 8.3 inch
• Inner Dimensions (W x H x D): 45.8 x 35.8 x 17.0 cm | 18.0 x 14.1 x 6.7 inch
• Material: Durashock molded EVA foam

- Disco-Antistat Ultrasonic - now with NEW features!

Automatic ultrasonic record washing machine

Disco-Antistat Ultrasonic - The most thorough way to wash records!
Our record washing machine Disco-Antistat Ultrasonic combines over 45 years of experience in the care and cleaning of records with highly developed, state-of-the-art cleaning technology.

The combination of ultrasonic cleaning and our proven goat hair brush system ensures gentle, groove-deep cleaning of your records and an audible improvement in the sound image.

During operation, the cleaning fluid is permanently clarified by a filter system and dirt particles are filtered out to minimise impurities in the fluid and thus achieve the best possible cleaning result.
With our special cleaner, the record is treated antistatically and thus permanently prevented from renewed soiling by adhering dust.
Our washer is ready for use in just a few steps and the intuitive operation ensures optimal results from the very first record!

• The cleaning time can be conveniently adjusted to the level of soiling of the record, supported by a functional display. Possible cleaning time is between 1-5 minutes and can be set in steps of 10 seconds.
• A well visible progress indicator informs about the status of the cleaning at a glance. (1 LED = 10% of the set cleaning time).
• After use, the filtered cleaning fluid can be conveniently refilled into the bottle by pressing a button via the new solenoid valve.
• The permanent filtering of the liquid prevents it from accumulating coarse dirt particles. This ensures a consistent cleaning result.
• The aluminium-glass filter can be easily removed and reinstalled for cleaning.
• Inserting and removing the record is quick and easy thanks to the innovative magnetic coupling.
• Driven by a Bosch electric motor, the record rotates evenly in the new fibreglass-reinforced tub, achieving a homogeneous treatment with ultrasound (46kHz.).

Disco-Antistat Ultrasonic
Cleanliness you can hear! A powerful ultrasonic transducer (46kHz.) generates with so-called cavitation bubbles that act directly on the dirt and remove it gently and effectively.
The ultrasonic waves also reach places that are inaccessible to conventional cleaning methods and ensure cleanliness down to the depth of the groove.
The loosened dirt particles are then brushed off with the soft goat hair brushes.

Scope of delivery:
• Ultrasonic record washer
• 200ml cleaning concentrate Disco-Antistat Ultraclean (1302000)
• 1 litre Disco-Antistat BiDest, high-purity water (1302001)
• 1 microfibre cloth
• Label cover incl. axle with magnetic coupling (1302010)
• Power supply 230 VAC / 12 VDC 3A
• 1 drying rack (1302499)
• 1 sponge brush 50ml
• 1 Mixing bottle (for preparing the cleaning liquid from Disco-Antistat Ultraclean and Disco-Antist BiDest)
• Replaceable aluminium/glass filter for cleaning (1225211)
• Operating manual in 8 languages
• Dimensions: 360mm x 180mm x 235mm (W x D x H)

Made in Germany!

The Tupac Shakur "West Coast" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

rtofon DS-3 - a high precision digital stylus pressure gauge
DS-3 is a new lightweight compact digital stylus pressure gauge model. The DS-3 is a miniature ultra precision non-magnetic instrument that tunes your tonearm to the highest possible degree. The DS-3 scale is factory pre-calibrated for high accuracy measurements with the tolerance of +/-0.01 g.

How to use the DS-3
• Turn on the device by pressing ON button. The display will show 0000.
• Press the UNIT button to select the measurement unit. The default setting is gram/g.
• Place the stylus on the measurement plate on the right side of the device. Display will start blinking. It will stop blinking when the measurement is completed. The value displayed on the screen is the stylus pressure.
• The display screen will automatically dim to saving mode after 5 seconds of inactivity and turn off after 60 seconds of inactivity.
• When a battery runs out, a LO indicator will flash on the screen. Then replace both batteries.
• PCS button balances count by calculating the average weight of one piece-weight called a unit weight, then applying it to the total weight of what you are trying to count. Firstly, weigh one PC, then weigh the bundle, then push the PCS button and on the display you’ll get a number of PCS.

Technical data and precautions
Sensitivity - 0.01g
Operational weight range - 0.1g to 200g
Battery - 2 × AAA
Size - (L) 120mm × (W) 60mm × (H) 17mm
Weight - 70g
LCD screen with back lighting
Auto off function
Protect the device against high temperatures, dust and humidity
Carefully lower the measurement object on the measurement plate
Operating temperature range +10⁰ - +30⁰C
Do not place objects weighting more than 200 g on the measurement plate
Do not place the device on an uneven surface, it may result in not accurate measurements

This The Clash Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The David Bowie "Low" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)