DJ Equipment 779 Items

PICK UP AND PLAY ON THE GO

Stylophone S1 Carry Case

EMBOSSED LOGO: Embossed logo on front
PERFECT FIT: Your Stylophone fits neatly and securely into the case.
PROTECTION: The Carry Case is made of EVA to protect your Stylophone
ZIP TAGS: with Stylophone logo
MESH: The Stylophone Carry Case has an internal black mesh which can store accessories

The Stylophone S1 fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S1 synthesizer

The WARM4 is a professional analogue rotary DJ mixer with four channels, developed and produced by ECLER in Barcelona.
It has 4 phono/line channels, 2 microphone inputs, classic sharp filters and a 4th order isolator. The WARM4 also includes a unique feature: an analogue subharmonics synthesizer that can be selected per channel and is specifically designed to generate and amplify ultra-low frequencies.
The WARM4 is ECLER's latest analogue rotary mixer, inspired by New York's disco "Paradise Garage", also referred to by François Kevorkian as the "Temple of Music", whose influence has been instrumental in shaping some of today's best clubs. Designed and manufactured in the Barcelona factory, the WARM4 is a mixer that keeps the classic structure of ECLER mixers in mind, but incorporates completely redesigned circuitry and mechanics. This ranges from new circuit boards that further improve the noise floor and dynamic range, to the rotary pots that are carefully hand-assembled by our production team.
Staying true to the innovative spirit since the first A4 mixer in 1971, ECLER presents a DJ tool never before included in a mixer: an analogue subharmonics synthesiser. Inspired by the original device from the "Paradise Garage" DJ booth, we have developed our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the DJ can adapt it individually to the track and the respective sound system.
The WARM4 also features the 4th order isolator already included in the WARM2, as well as 4 mixing channels, 3-band equaliser with full cut per channel and high quality potentiometers from Alps with metal axis. Using an external effects module has also never been easier. The WARM4 can output a PRE/POST fader signal and lets you control and pre-listen to the return signal.
The WARM4 is designed specifically for sound systems that can reproduce subsonic frequencies - for clubs, festivals and events where bass response is crucial.
Unleash a whole new dancefloor experience and take the music experience to the next level!

Technical details:
AUDIO PERFORMANCE
INPUTS:
-
Number of inputs:
LINE: 4 stereo unbalanced inputs
PHONO: 4 stereo unbalanced inputs
MIC: 2 mono balanced inputs
FX RETURN: 1 stereo unbalanced input
Connection types:
LINE 1-2-3-4: RCS STEREO
PHONO 1-2-3-4: RCS STEREO
MIC 3: XLR3-F
MIC 4: Combo XLR3-F/6.3mm jack balanced
FX RETURN: RCS STEREO
Input sensitivity nominal / impedance:
LINE: 0 dBV / 50kΩ
PHONO: -40 dBV / 50kΩ
MIC: -50 dBV / >1kΩ
FX RETURN: 0 dBV / >6kΩ
POWER:
-
Frequency response:
LINE: 10Hz÷30kHz -1dB
MIC: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB
THD+N:
LINE: <0.004%
MIC: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%
CMMR (Common-Mode Rejection Ratio):
MIC: >75dB at 1kHz
Signal-to-noise ratio:
LINE: >105dB
MIC: >90dB
PHONO: >100dB
FX RETURN: >110dB
Trim control / tone control for inputs 1-2-3-4:
INPUTS 1-2-3-4: ±15dB
BASS: +10/-30dB
MIDDLE: +10/-25dB
TREBLE: +10/-30dB
Trim control / tone control for the isolator:
BASS: +12/-70dB
MIDDLE: +12/-40dB
HIGH: +12/-70dB
Sound filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MIDDLE: 200Hz÷6.8kHz
HIGH: 6.8kHz
Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz÷4kHz
MIDDLE:
HIGH: 4kHz
Analogue subharmonics synthesiser:
Input selective filter: 50÷120Hz
Harmonics synthesis: 25÷60Hz
Maximum output level: +12dBV
OUTPUTS:
-
Number of outputs:
HOUSE: 1 stereo balanced outputs / 1 stereo unbalanced outputs.
BOOTH: 1 stereo balanced outputs / 1 stereo unbalanced outputs
HEADPHONES: 2 stereo unbalanced outputs
FX SEND: 1 stereo unbalanced output
REC: 1 stereo unbalanced output
Connection types:
HOUSE: XLR3-M STEREO / RCS STEREO
BOOTH: XLR3-M STEREO / RCS STEREO
HEADPHONES: jack stereo 6.3mm / jack stereo 3.5mm
FX SEND: RCS STEREO
REC: RCS STEREO
Output level / Minimum load:
HOUSE (balanced): 0dBV/600Ω 1V *(+12dB 4V).
HOUSE (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (balanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ
Maximum undistorted output level:
HOUSE (electrically balanced): 21dBV (23dBu)
BOOTH (electrically balanced): 21dBV (23dBu)
HOUSE (unbalanced): 21dBV (23dBu)
BOOTH (unbalanced): 21dBV (23dBu)
ELECTRICAL
Power supply: Internal
AC mains voltage: 90-264VAC 47-63Hz
AC mains plug: 15A IEC inlet plug
Rated power consumption: 39 VA
OTHER
Control mode: Rotary with Alps Blue Velvet potentiometers and Alps RK09L potentiometers
Phantom power: 18VDC/5mA max (ON by default)
Input VU meter: LED 12 segments (-38dBV ÷ +10dBV)
House Mix Booth VU meter: LED 12 segments (-30dBV ÷ +20dBV)
Subharmonics output VU meter: LED 3 segments (-20dBV / 0dBV / +4dBV)
PHYSICAL
Operating temperature: -5˚C ÷ 45˚C
Operating humidity: 20 - 90% RH (no condensation).
Storage temperature: -10°C ÷ 50˚C
Storage humidity: <90% RH (no condensation)
Installation options: Desktop or rack mounting with optional accessories.
Accessories included: IEC cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm
Weight: 5.32 kg
Shipping dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm
Shipping weight: 6.74 kg

With this cleaning liquid specially adapted to the FLUX-Sonic, you always get the best result!

Weight: 61 g
Size: 3,6 x 2 x 9,2 cm

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Replacement filter for the FLUX-Turbo.
The replacement filter must be changed approx. every 2 to 3 months or after 20 aspirations to ensure a good suction result. Two filters are supplied in a double pack.
The inner filter material is selected to retain the coarse particles. At the same time, the suction power is not reduced too much by the pressure loss.
The FLUX-Filter is compatible with FLUX-Turbo and the FLUX-Turbo 2.0.

Weight: 3 g
Size: 3 x 3 x 3.5 cm

Replacement skids for the FLUX-Turbo.
After approximately one year of use, we recommend replacing the skids. In the set all 3 skids are included: 2 short ones for the sides an one long one for the suction channel.

Measures short:
Weight: 0.1 g
Size: 2 x 0.6 x 0.5 cm

Measures long:
Weight: 0.3 g
Size: 10.5 x 0.6 x 0.4 cm

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

Stylus for Goldring E4 MM Cartridge

Just needle, not the complete cartridge included!

R2 2-CHANNEL ROTARY DJ MIXER

Introducing the Headliner R2, a 2-channel rotary DJ mixer that is perfect for DJ’s looking for precise control and a warm sound, without breaking the bank. The R2 is packed with features, like an analog filter and 3-band isolator EQs on each channel, and uses only high-quality components, including genuine ALPS potentiometers.
Featuring two stereo channels with selectable Line and Phono RCA inputs, each channel on the Headliner R2 comes equipped with gain control with a peak LED, a 3-band isolator EQ, a headphone cue selector, a large channel volume control knob, and a filter activation switch.
The Master channel boasts an analog filter, headphone monitoring, and output control section. The analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls, giving you precise control over your sound. Independent Master and Booth outputs with volume controls, both with balanced XLR and unbalanced RCA connectors, give you the flexibility to connect to any sound system.
The Headliner R2 features genuine ALPS potentiometers, and a sturdy metal enclosure with stained wood side panels for a classic look that will complement any DJ setup. The modular internal construction, coupled with the external power supply connected via locking Mini XLR ensure superior audio performance.
The Headliner R2 is a reliable, high-quality mixer that will give your DJ performances that classic vibe. Whether you’re spinning house, techno, or classic funk/soul/disco jams, this fun little mixer is the perfect addition to your setup.

Technical specifications:

• Two stereo channels with selectable Line and Phono RCA inputs
• Each channel features Gain control with Peak LED, 3-Band Isolator EQ, Headphones Cue selector with LED, channel
volume control and filter activation switch with LED
• Master channel features analog filter, headphone monitoring and output control section
• Analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls
• Genuine ALPS potentiometers
• Headphone Cue control section features volume control, mix control (Cue/Master), and split monitor switch
• High current headphone amplifier with dual 1/4” and 1/8” jacks
• Independent Master and Booth outputs with volume controls, balanced XLR outputs and unbalanced RCA outputs
• Additional Record output with unbalanced RCA jacks
• Dual LED level meters for the Master output
• Microphone input with level control on front panel
• Sturdy metal enclosure with stained wood side panels
• Modular internal construction for superior audio performance
• External split rail power supply connected via locking Mini XLR connector and push-button power switch
• Measurements: 320 x 219 x 106 mm
• Weight: 2.8 kg

Microphone Input:
Nominal Input Level: -50dBu
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.1%
EIN: -120dBu (150Ω Load)
Input Impedance: 3 kOhm

Line Inputs:
Nominal Input Level: -10dBV (-7.8dBu)
Gain Range: -12dB to +12dB
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.05%
Input Impedance: 47 kOhm

Phono Inputs:
Maximum Input Level: -40dBu
Gain Range: -12dB to +12dB
Frequency Response: RIAA

Main Outputs:
Nominal Output Levels, balanced: +4dBu
Maximum Output Level, balanced: +20dBu
Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
Maximum Output Level, unbalanced: +12dBu
Frequency Response: 20Hz-20kHz (+/-0.5dB)
Residual noise: <-80dBu Dynamic Range: > 100dB
Crosstalk: < -65dB
THD + N: < 0.05%

Headphone Output:
Maximum Output Level: 70mA/channel into 150Ω
Minimum Load Impedance: 32 Ohms/channel

Power Supply:
Type: External with locking mini-XLR connector
Input Voltage: 100-240v ~ 50/60Hz
Output Voltage: +/-15V; 500mA
Voltage Range: 32 Ohms/channe
THD + N: < 0.05%
Input Impedance: 47 kOhm

Carbon Fibre Handle for your Stanton SPX!

3K weave glossy carbon fiber tube handle that can be easily installed into your Stanton SPX turntable.

Real carbon fibre
No drilling required
Easy install

Carbon Fibre Tone Arm for the Stanton STX Portable Turntable.

Available with Black gimble.

Engineered to work with:

• 3K carbon fibre tube and aluminum head shell
• Billet aluminum gimbal with ball bearings
• Custom engineered limited bounce tension system
• Phono analogue pre-amp included
• Easy wire installation kit, including cartridge mounting screws
• Engineered to work flawlessly with: Ortofon VNL/OM, Reloop OM-GT and Shure M44-7

Please note: The JDDPTA-SX does not include a cartridge and stylus.

Why not get the tonearm with a Ortofon VNL Cartridge & Stylus?

Installation video can be found here:
https://www.youtube.com/watch?v=pQsXTqpkfjQ

Jesse Dean Contactless Scratch Fader for your Stanton STX portable turntable.

The all new high performance fader for ultra fast cuts.

Digitally controlled.

The fader features billet aluminum rail blocks for a robust construction.

Extremely easy cut-In adjustment without having to remove your fader.
Simply calibrate your fader from the top!

45mm glider travel with standard mounting hole pattern for preferred alignment.

Kit includes:

• JDDX2R-SX fader
• Black JDD fader plate
• Black fader cap
• Mini screwdriver for cut adjustment

JDDX2R-SX calibration instructions: https://www.youtube.com/watch?v=Gm3RpM8ughI&t=3s
Stock fader calibration instructions: https://www.youtube.com/watch?v=4o4nG07CUcA

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

A dope Cudi mashup, printed on a high quality 16oz glazed bottom slipmat.

Expert 12 in 1 turntable care kit - A must-have accessory

The Lenco TTA-12IN1PRO is an aluminium suitcase containing all necessary accessories for taking care of your turntable and records collection.

The contents:
A record anti-static brush to clean your records, a stylus force scale to check the pressure of the stylus on the record, a cartridge azimuth and VTA protractor and a cartridge alignment protractor to make sure that your cartridge is perfectly aligned for the best sound performance.
4 small level gauges and a bigger level gauge to make sure that your turntable is perfectly horizontal.
In case you want to change your cartridge you will find pliers, 4 cartridge wires, 12 cartridge screws and a small screw driver.
To keep the stylus clean we provide a stylus brush.
Plus gauge & 45rpm adapter.

Included : Record anti-static brush, Stylus force scale, Cartridge azimuth and VTA protractor, Cartridge alignment protractor, 4 small level gauges, Pliers, 4 cartridge wires, 12 cartridge screws, Screw driver, Stylus brush, Big level gauge, 45rpm adapter

The new CTRL Case DDJ-REV5 / DDJ-REV7 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 / DDJ-REV7 controller. Made of lightweight and rigid Durashock molded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

FITS:
• Pioneer DDJ-REV5
• Pioneer DDJ-REV7

BASICS:
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
• Comfortable, rivet reinforced carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:
• Outer measures: 83 x 46 x 14 cm
• Inner measures: 73 x 37 x 11 cm
• Weight: 3 kg

The new CTRL Case DDJ-SB2/RB a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-SB3, DDJ-400 or former models such as DDJ-SB2 or DDJ-RB controller. Made of lightweight and rigid Durashock molded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls. Whether you are driving or flying to your next gig, the MAGMA CTRL Case DDJ-SB2/RB will be by your side throughout the journey.

FITS:

• Pioneer DDJ-SB
• Pioneer DDJ-SB2
• Pioneer DDJ-SB3
• Pioneer DDJ-RB
• Pioneer DDJ-400

BASICS:

• Lightweight Durashock molded 5mm EVA foam and polyester exterior shell
• Sturdy zipper
• Including high density egg foam to protect control knobs, faders and jog wheels
• Comfortable carrying handles and detachable shoulder-strap
• Hand-luggage compatible
• Fits inside the MAGMA Rolltop III Backpack
• Compatible with Decksaver® covers

SPECS:

• Outer measures: 52 x 30 x 10 cm
• Inner measures: 49 x 28,5 x 7 cm
• Weight: 1,2 kg
• Color: black/red (Item-No.: 47998 / EAN-Code: 4041212479983)

Introducing the CTRL CASE DJM-V10/DJM-A9 - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit both, the latest Pioneer DJM-A9 and DJM-V10 club-mixer models, providing maximum protection with a Durashock molded EVA shell and fully padded interior. Plus, it features a convenient slot for storing audio cables and power adapters.

FITS:

• Pioneer DJM-A9
• Pioneer DJM-V10

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam plus fully padded interior
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 57 x 56 x 15 cm
• Inner measures DJM-V10: 46 x 44 x 7 cm / DJM-A9: 43 x 41 x 7 cm (Equipment slot)
• Weight: 2,3 kg

Introducing the CTRL CASE FOUR - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit the latest Rane Four DJ-controller, providing maximum protection with a Durashock molded EVA shell and fully padded interior.

FITS:

• Rane Four

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam and 4 EVA foam-corners
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 87 x 46 x 14 cm
• Inner measures: 78,5 x 39,5 x 11 cm
• Weight: 2,65 kg

The CTRL CASE MASCHINE is specially designed to hold the new NI Maschine+, Jam or MK2. Crafted from durable and lightweight Durashock molded EVA foam and a water-rejecting polyester exterior, it is furthermore equipped with a removable (velcro) foam that provides extra protection for all encoders, knobs and buttons.

FITS:

• NI Maschine Jam
• NI Maschine+
• NI Maschine MK2
• NI Maschine

BASICS:

• Lightweight Durashock molded 5 mm EVA foam and polyester exterior shell
• Incl. high density egg foam to protect control knobs, faders and jog wheels
• Sturdy zipper and carrying handle
• Fits including Decksaver® cover
• Compact size fits in any MAGMA bag

SPECS:

• Outer measures: 37 x 34,5 x 8 cm
• Inner measures: 33,5 x 31 x 4 cm
• Weight: 0,7 kg
• Color: black/black (Item-No.: 48004 / EAN-Code: 4041212480040)