DJ Equipment 378 Items

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Replacement filter for the FLUX-Turbo.
The replacement filter must be changed approx. every 2 to 3 months or after 20 aspirations to ensure a good suction result. Two filters are supplied in a double pack.
The inner filter material is selected to retain the coarse particles. At the same time, the suction power is not reduced too much by the pressure loss.
The FLUX-Filter is compatible with FLUX-Turbo and the FLUX-Turbo 2.0.

Weight: 3 g
Size: 3 x 3 x 3.5 cm

The excellent Dr. Suzuki Slipmats are now available in turquoise!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The excellent Dr. Suzuki Slipmats are now available in green!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

A music producer/ sound engineer looking for a professional, durable case solution for your Motu M4 or M2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Motu M4 or M2, this case is perfect for the travelling music producer/ sound engineer that needs to protect their equipment.

FEATURES
Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Motu M4 or M2

Specifications:
• Weight: 0,54 kg / 1.188 lbs
• Outer Dimensions (W x H x D): 23.3 x 15.5 x 5.6 cm | 9.2 x 6.1 x 2.2 inch
• Material: Durashock molded EVA foam

A Digital DJ/ Producer looking for a professional, durable case solution for your Reloop Flux? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Reloop Flux, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

Weight 0,20 kg / 0.44 lbs
Outer Dimensions (W x H x D) 21.0 x 18.5 x 6.2 cm | 8.3 x 7.3 x 2.4 inch
Inner Dimensions (W x H x D) 16.0 x 13.0 x 5.2 cm | 6.3 x 5.1 x 2.0 inch
Material Durashock molded EVA foam
Protection Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam
Extra's Easy grip zipper pulls
Fits Reloop Flux

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

With this cleaning liquid specially adapted to the FLUX-Sonic, you always get the best result!

Weight: 61 g
Size: 3,6 x 2 x 9,2 cm

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

The black vinyl stand offers space for storing 40-50 records. It is made of powder-coated metal and is ideal for professional and home use. Measuring 25 x 25 x 23 cm and with its clear design, the stand is an ideal storage option for all records that you want to have to hand quickly.
Under the Vinyl Care by HHV label, we present high-quality care and storage solutions for vinyl collections. We stand for top quality at affordable prices and take feedback from our customers as an incentive to continuously develop our products.

The perfect companion for DJs and music lovers on the go. Designed for practicality and protection, the Reloop Premium Headphone Bag XT combines a sleek, durable exterior with clever features. It can hold most common DJ headphones for a secure fit while traveling.

Made of lightweight Durashock molded EVA foam with a durable polyester outer shell, the bag protects your headphones from common travel threats such as bumps, spills, dirt and dust.

The bag is equipped with a convenient carrying handle for easy transport and a snap hook for easy attachment to your luggage. Additionally, it comes with an adjustable and detachable shoulder strap, ensuring flexibility in how it can be carried. A mesh pocket inside helps you keep your cables and accessories organized. The durable zippers are built to withstand everyday use.

FEATURES:
• Professional DJ headphone travel bag in a sleek, high-quality design
• Universal fit for most common DJ headphones
• Made of lightweight Durashock molded EVA foam and a polyester exterior shell for a reliable protection
• Keep your headphones safe from bumps, liquids, dirt and dust
• Including a convenient carrying handle and a snap hook for easy luggage attachment
• Adjustable and a detachable shoulder strap
• Mesh-compartment for cables and accessories
• Durable zippers for everyday use

There is space for around 40-50 records in this practical record stand, which invites you to browse. Thanks to its powder-coated metal construction, dimensions of 25 x 25 x 23 cm and clear design, the stand fits into any room and is also suitable for professional use.
We have developed Vinyl Care by HHV for passionate vinyl collectors. In addition to practical cleaning products for vinyl, we offer storage solutions and gift ideas under this label that will make every record lover's heart beat faster.

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Model AT-VM95C
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95C
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

AT617A - CARTRIDGE STYLUS CLEANER
- Specially formulated polyurethane gel removes dirt particles from stylus
- Gel remains tacky for years
- Surface is washable for repeated use

Made in Japan, STOKYO turntable replacement headshell

Official STOKYO headshell same type as you will find on Technics SL-1200
High Quality finish (Matte)
Lead wires (Shielded)

A music producer/ sound engineer looking for a professional, durable case solution for your Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante, this case is perfect for the travelling A music producer/ sound engineer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Removable divider for extra cables or power adapter
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante

Specifications:
• Weight: 0,40 kg / 0.88 lbs
• Outer Dimensions (W x H x D): 23.8 x 14.9 x 8.5 cm | 9.4 x 5.9 x 3.3 inch
• Inner Dimensions (W x H x D): 22.8 x 13.9 x 7.5 cm | 8.9 x 5.5 x 2.9 inch
• Material: Durashock molded EVA foam

comfortable, solid, universal shoulder pad for
heavy bags and long journeys
a heavy velcro closure makes the pad attachable
to any of our bags with 50mm wide straps.

especially developed for our chateau vinyl record bag range

material: certified cordura nylon

handmade in germany

pictures: airbagcraftworks.com

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" Orange).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on STOKYO Thin Press©️ Orange 12" Vinyl

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" White).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on WHITE on STOKYO Ultra-Thin Press©️ Vinyl (6% Lighter than Orange!)

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

Record puck
Shapely stainless steel centering unit for use with singles.

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Whether music cassettes or radio plays - cassettes are real collector's items that are worth storing well and presenting attractively. Our cassette rack is made of black lacquered pine wood and offers space for a total of 48 cassettes in three rows.
Vinyl Care by HHV stands for practical storage and cleaning products for music lovers. All products in the series impress with their clear design and uncompromisingly good quality.

Dimensions: 385 x 385 x 50 mm

Store your mixtapes and radio plays in style in our cassette rack. The 385 x 385 x 50 mm shelf, which is made of pine wood and painted white, has space for a total of 48 cassettes.
The cassette rack is part of the Vinyl Care by HHV product range, which stands for high-quality, clearly designed and affordable solutions for passionate vinyl collectors.

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

if it"s time for a new protective cover for your chateau vinyl bag, you can order it here as a seperate item.
all djs know about the hard and sometimes rather shortlife of a record case...
the flight cover is the best way to expand the lifetime of your chateau vinyl or chateau vinyl solo bag.

we strongly recommend not to travel especially fly without it. at work the flight cover can stay on the lower part of the case and doesnt need to be taken off completely.

satisfaction is reported by our frequent flying customers.

material: waterproof cordura nylon, produced in germany.
colour: black

made in germany

pictures: airbagcraftworks.com

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Level Gauge - Stainless steel
High precision gauge, calibrated.

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

Luxury leadwireset
LW-6N is the 6N lead wire made of Ultra High Purity Copper wire.
The configuration is very sofisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The end of wire is fastened by gold plated terminal.
The tight winding against each other makes the clear transmission of music signals. Clear and crisp tonality.

Technical data:
• High purity Cu wire 6NCu: 7 x φ 0.18mm (Right strands)
• High purity Cu wire 6NCu: 17 x φ 0.10mm (Left strands)

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 6N with the SH-4 headshell requies the LW 6N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

This stunning Edge Glued Oak Music Box color was developed as a custom project from one of our clients, but we thought it looked so good we decided to offer it in our Music Box Vinyl Storage line. Use the Rosewood color exclusively or mix and match with our other Music Box colors to create a rich, unique pattern to compliment your listening room.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

AT-VM95C/H
VM95 SERIES CONICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japa

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95C/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95C

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 305 Universal
*) Typical value

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

A digital DJ looking for a professional, durable case solution for your Ableton Push 3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Ableton Push 3, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Ableton Push 3

Specifications:
• Weight: 0,90 kg / 1.98 lbs
• Outer Dimensions (W x H x D): 42.4 x 40.7 x 6.1 cm | 16.7 x 16.0 x 2.4 inch
• Inner Dimensions (W x H x D): 38.4 x 32.2 x 4.5 cm | 15.1 x 12.7 x 1.8 inch
• Material: Durashock molded EVA foam

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0