DJ Equipment 501 Items

Bearing lubricant

How to use Grease it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.

Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line.
For non-inverted bearings you should use Lube it.

Features:
• To be used with inverted bearings
• Helps a smooth movement
• Pre-filled syringe
• Easy handling

Amount: 2.3 ml

The tightly woven velvet on the brush surface is ideal for cleaning the sound grooves of the record and also enhances the cleaning effect. Fine dust adhering to the record is removed. In addition to the CL-120 velvet brush, a special brush is supplied to keep the cleaning surface of the brush clean.

JC-30 RECORD OUTER SLEEVES 325X325MM

To protect your 12" records from dust and other contaminants, Nagaoka has developed the JC-30 outer sleeves. Compared to the earlier model No108/3, the thickness of the sleeves has been revised to provide even more reliable protection. The outer shells measure 325 mm wide x 325 mmm high.

• dimensions: 325 x 325 x 0.10 mm
• selling unit: 30 pieces
• Made in Japan

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

Cleaning spray for records. The high cleaning effect suppresses static electricity. Wipe dry after spraying.

Cleaning gel for records, floor coverings, joints, blinds or keyboards. Stubborn dirt is reliably removed. Can be used several times.

Additionally to the RHP headphones series, Reloop offers an in-ear headphones solution with the INP-9 which can be used as stage or studio monitor alike, as well as bringing a great performance for your mobile media player. Smartphone users will love the integrated phone control for taking calls. And thanks to the integrated microphone you can always leave your phone in your pocket. Two different-sized silicone plugs guarantee high wearing comfort even during long use. Thanks to the especially isolated ear plugs with powerful 10mm drivers ambient noise will remain shut out while the rich sound can unfold. Smart sound by Reloop.

FEATURES
• Professional in-ear headphones
• Special sound isolation ear plugs for crisp sound characteristics
• Perfect ambient noise canceling
• Perfect listening pleasure due to crisp highs and powerfull bass
• High wearing comfort thanks to 2 different silicone plugs
• Phone control incl. smartphone answer with integrated microphone for all current mobile phones with 3.5 mm jack
• Smartphone control
• Ideal for portable media players, smartphones, production and stage monitoring

TECHNICAL DATA
Headphones:
• Frequency range: 10 Hz - 20 kHz
• Impedance: 14 ohms
• Acoustic pressure: 97 dB
• Weight: 15 g

Microphone:
• Directivity: omni-directional
• Frequency range: 50 Hz - 20 kHz
• Impedance: 2200 ohms
• Sensitivity: -65 dB +/-3 dB (at 1 kHz)
• S/N ratio: -58 dB
• Incl. 2 different sized silicone plugs and VoIP adaptor

Every once and a while you need to take care of your record player. This is the NP5 diamond stylus replacement needle which is compatible for these record player:
• Mercury
• C62 Black
• T150
• C6 White

Specifications:
• ABS Plastic Composition
• Diamond Stylus Needle
• Plays 3 Speeds (33 1/3, 45 and 78 RPM)

EFFICIENT DESIGN
The Smart Display Stand is a continuously adjustable and collapsible stand for common tablets and smartphones and offers a stable yet lightweight construction.

INDIVIDUALLY ADJUSTABLE
With an adjustable angle of up to 270 degrees of rotation, ideal alignment of smartphones and tablets is possible.

VERSATILE USE
The Smart Display is perfect for djing, recording, live streaming, video chats, movies and watching series.

EXPAND YOUR WORKSPACE
In a classic minimalist design made of high-quality aluminium, the Smart Display Stand is excellently suited as a monitor extension and is compatible with common smartphones and tablets from 7 to 13 inch.

FEATURES
• Continuously adjustable and foldable stand for common tablets and smartphones
• Stable and lightweight construction
• Adjustable angle with up to 270 degree rotation for optimal alignment of smartphones and tablets
• Anti-slip stands and rubber inlay for stable use
• Perfect for DJing, recording, live streaming, video chats, movies or display extention, etc.
• Compatible with iPhone & iPad series, Galaxy, Note & Tab series, Nexus and many more (all devices from 7'' - 13'')
• Classic minimalist design made of high-quality aluminium

TECHNICAL DATA
• Max. load: 3 Kg
• Weight: 164 g
• Total dimensions: 81.73 x 128.67 x 102.83 mm
• Tray: 61.90 x 71.43 x 19.50 mm
• Supply without decoration

Via this smart additional module it is now possible to place audio interfaces of timecode systems in the right position. This way the interfaces are always in optical range and easy to reach.

FEATURES
• Additional module for the Reloop Laptop Stand and Laptop Stand V.2
• For space-saving accomodation of audio interfaces and other additional hardware
• Supply without decoration

The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.

High-tech lubricant for constant velocity

How to use Lube it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Lube it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some lube off your turntable to keep it looking clean.

Please only use Lube it for turntables like Elemental, Primary, T-Line, Essential, Debut, The Classic, Juke Box & X1/X2.
For inverted bearings like RPM Line, Xtension models and Signature Line please use Grease it.

Features:
• Helps a smooth movement
• Easy handling

Amount: 5 ml

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: silver
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g (per frame)

Reloop's compact headphones as deep black MK2 edition. The RH-2350 PRO MK2 are the ideal headphones for DJs who are on the road a lot. In spite of its marginal weight and small cups, the 2350 pushes a superb 102 dB out of its 40 mm large dynamic drivers that are the big secret to its power. Light, loud, and with a modern design.

FEATURES
• Professional DJ headphones, classic construction
• Excellent sound characteristics
• Very high output capacity thanks to 40 mm dynamic driver
• Excellent wearing comfort
• High-quality construction
• Very good foothold
• Marginal weight

TECHNICAL DATA
• Frequency range: 20 Hz – 20 kHz
• Sound pressure level: 102 dB
• Input impedance: 32 ohm
• Driver: 40 mm
• Cable: 3 m
• Connection: 6.3 mm jack
• Weight: 186 g

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

Spraying your records with the anti-static spray will reduce crackling during playback.

Flight case for Ortofon Concorde MkII

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Your record player needle also needs cleaning and care. Due to the air pollution caused by both external influences (traffic) and domestic factors (kitchen, smoking), a sticky film can form on your records over time. During playback, the stylus scrapes this deposit out of the record groove, which in turn creates a sticky film around the tip of the stylus, which in turn traps other dirt and dust on your record.

These deposits not only affect sound quality, but can even damage your favorite records. Nagaoka AM-801's special formula efficiently dissolves and removes any sticky substances trapped on the needle.

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 7" Vinyl Frame MDF (Triple Pack) - features/specifications:

* color: black
• sturdy frame made of medium density fiberboard for 7 inch records with plexiglass cover
• outer dimensions: approx. 220 x 220 x 20 mm
• inner dimensions: 180 x 180 mm
• weight: 330 g (1 frame)

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 7" Vinyl Frame MDF (TRiple Pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 7 inch records with acrylic glass cover
• outer dimensions: approx. 220 x 220 x 20 mm
• inner dimensions: 180 x 180 mm
• weight: 330 g (1 frame)

Stroboscope disc

Control of turntable speed.

Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low. Please note: Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.

Cleaning spray for records

Application: Spray the record evenly at short intervals for a few seconds and then dry.

Antistatic cleaning spray for records. Cleaning will reduce the frictional resistance of the needle.

RECORD LABEL PROTECTOR FOR CLEANING

Before cleaning the record, the label protector is screwed onto the record label from both sides so that it does not come into contact with water. In this way, record labels are preserved for a long time.

Here comes the add-on to our latest concrete turntable collaboration between HHV and BETONAT: the 100% Concrete Vinyl Stand. With a simple and straightforward design featuring clear shapes, this stand celebrates the fusion of urbanism, music, and subculture.

Handcrafted from 100% concrete, this vinyl stand is aesthetically pleasing and its minimalistic design complements any modern living space.

Whether you’re a collector or just starting out, the Vinyl Display Stand is the perfect way to show your favorite records.

Original HHV × BETONAT Vinyl Display Stand
Suitable for 7″ vinyl singles & 12″ vinyl LP, not for double LP
118 mm length x 48 mm height x 60 mm width
0.55 kg pure concrete
100% handmade in Berlin Neukölln
Beautiful gift box

Welcome to the new era of DJing - control djay on your iPhone, iPad, or Mac with professional turntables and mixers. You can now take the stage - anywhere, anytime - using your ultra portable iOS device as the brains of the DJ booth.

Hardware Setup
Plug-and-Play DVS for your iOS device
You can now connect your iOS device directly to your mixing system. The optimized user interface automatically adapts when DJ hardware is connected.

djay Control Vinyl
The next generation of DVS technology
Algoriddim has partnered with the world leading DJ manufacturers to develop a wide range of premium DJ controllers, DJ mixers, and accessories, co-branded and designed to seamlessly integrate with Algoriddim’s award-winning DJ apps.

This feature is powered by an enhanced DVS control tone exclusive to djay Pro AI which has a unique control data stream imprinted into the grooves of each of the three distinct sections of the vinyl. This drives the patented Neural MixTM technology running on Mac, iPad, or iPhone, using cutting-edge artificial intelligence to separate any song into its original components in real-time.

Mobile & Desktop
Mac. iPad. iPhone. DVS without compromises.
We’ve worked closely with some of the world’s top DJs and carefully adapted djay’s user interface to perfectly complement any connected hardware. It’s a unique blend of tactile and touch based control. Moreover, djay’s audio engine has been fine tuned for digital vinyl control to offer the tightest scratching, most accurate time-stretching, and lowest latency possible - no matter if you’re using your Mac, iPad, or iPhone.

DVS FAQs
What you need to know
What do I need in order to use DVS with djay?
DVS in djay is supported with any compatible mixer, turntable, and djay Control Vinyl (see below). Depending on which device you are using djay on, you might need one of the following adapters in order to connect your mixer:

iPad or Mac with USB-C port: USB-C to USB Adapter
iPad or iPhone with Lightning port: Lightning to USB 3 Camera Adapter
Which mixers are supported?
djay supports any audio interface, mixer, and MIDI controller that is supported on the respective platform. In addition, many of the most popular DVS-compatible mixers have been pre-mapped and can be used plug-and-play with djay and DVS.

➡ List of pre-mapped DVS-compatible mixers

Which DVS timecode djay Control Vinyl is supported?
In addition to the official djay Control Vinyl (see above), djay also supports standard timecode DVS systems that use a control tone of 1kHz (which the vast majority of DVS systems do).

Where can I get the official djay Control Vinyl?
Head over to our vinyl partner STOKYO’s website to order your djay Control Vinyl today! The vinyl are available as a single option or as a pair, and are in stock now.

Which versions of djay support DVS?
DVS is supported in the latest versions of djay on Mac, iPad, and iPhone (version 4.0 or later).

Video: https://www.youtube.com/watch?v=gUXWGZFvBZs

RS-LP2 ANTI-STATIC RECORD SLEEVES

More than 35 years ago Nagaoka added them to its program under the type designation No. 102. Because they were the best. And today, in the third development generation called RS-LP2, Nagaoka still sells them - for the same reason!

More effective than any other product, the RS-LP2 prevents the vinyl from static electricity, making it easier to remove the record, protecting the groove from damage caused by dust and preventing the unsightly audible static discharge during playback. Give it a try!

• static charge is prevented
• protects your 12" vinyl records from dust damage
• the smooth cover prevents damage to your records
• one package contains 50 pieces
• Dimensions approx.: 308 x 308 mm, rounded on one side
• Made in Japan

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: black
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

Spirit level

Spirit level for optimum positioning of a turntable.

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

STYLOPHONE S1
THE ORIGINAL POCKET SYNTHESIZER
The unique sound of the Stylophone has been used by everyone from Bowie to the White Stripes.

The latest Stylophone features the same iconic, analog sound as the original, first released in 1968.

The Stylophone is easy to play, keyboard operated and you can take it anywhere!

EASY TO PLAY
Play by tapping and sliding the connected stylus along the touch-sensitive metal surface. Each segment on the surface plays a different note. It’s easy to play, perfect for beginners and experienced musicians!

PORTABLE & BATTERY-POWERED
At less than 12cm wide, the Stylophone will fit right in your coat pocket. It runs on 3 x AA batteries, and features a built-in speaker and headphone socket – so you can play it everywhere you go.

CONNECT TO YOUR OTHER GEAR
Connect the Stylophone to your computer and other gear to enhance your sound possibilities! Use a 3.5mm Stereo cable to connect into the line input on your PC, and use your preferred software to record and manipulate your Stylophone sounds.

Video: https://youtu.be/qJ1D35aYiv0

A Digital DJ looking for a professional, durable case solution for your Universal Audio Apollo Twin / MKII controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio Apollo Twin / MKII controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Weight 0,47 kg / 1.034 lbs
Outer Dimensions cm: 16 x 15.8 x 6.8 | inch: 6.29 x 6.22 x 2.6
Inner Dimensions Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Universal Audio Apollo Twin
Universal Audio Apollo Twin MKII

Features:

• Durashock molded EVA foam
• Fits Universal Audio Apollo Twin MK2 controller
• Heavy duty handle
• Easy grip zipper pulls