DJ Equipment 126 Items

The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

Carbon Fibre Handle for your PT01.

3K weave glossy carbon fiber tube handle that can be easily installed into your Numark PT01 turntable range.

- Real carbon fiber

- No drilling required

- Easy install

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

PROS
•Modern turntable
•Bluetooth speaker connectivity
•Directly digitises vinyl to a storage medium
•Semi-automatic

PRODUCT INFORMATION
•The Lenco LBT-120BK Turntable is a semi-automatic record player with Bluetooth functionality. You can connect the record player to your Bluetooth speaker in seconds and enjoy a full and warm sound from the comfort of your couch. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your LP or single at the right speed.

•And what if you want to enjoy your favourite records while cycling or in the train? The Lenco LBT-120BK digitises all your favourite records via the built-in USB port. You can transfer the rec•ordings to a USB stick in next to no time and carry them with you in your pocket.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LBT-120BK turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tone arm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LBT-120BK is supplied with a dust cover that keeps your Lenco fresh and clean during brief periods when you are not using your turntable.

SPECIFICATIONS
•SKU: A002991
•Product height: 12.20 cm
•Product depth: 36.20 cm
•Product width: 42.20 cm
•Number of RCA outputs: 1
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902039822
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 12W

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Wood
•SKU: A003104
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040989
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

SPECIAL FEATURES
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT-95E)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 2.0g +/–0.5g
• Cartridge Weight 5.7g +/–0.5g
• Head-shell Weight 11g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 355x 121mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/202/TD202-User-Guide.pdf

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The White Peach Records Logo 12" Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The OP Art 2 Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Mr Bongo Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Roadinger SL-1 is a robust flightcase for 7 inch single records. The elegant DJ Case is not only extremely stable but also survives every DJ use without any problems.
The SL-1 flightcase is very shock and scratch resistant thanks to the robust laminated 7mm plywood. For a strong hold of the cover and easy unlock and lock the helpful butterfly locks.

Features:
• For 100 x 7" vinyl records
• Practical division with lid and lower part.
• Interior completely covered with black felt.
• Aluminium profile frame (22 mm) with steel corners
• 2 high-quality brand butterfly locks
• 8 x rubber feet
• 1 high-quality brand folding handle
• Made in Europe

Technical data:
• Colour: Black laminated
• Outer material: 7mm plywood
• Internal dimensions: 185 (length) x 220 (width) x 350 (height) mm
• External dimensions: 210 (length) x 245 (width) x 385 (height) mm
• Weight: 3,35 kg

Classic slipmat made of felt. Protects your vinyl and reduces friction while Scratching, Backspins and Beatjuggling.

Diameter: 300mm
Thickness: 3mm

Ortofon SB-2 Stroboscope
Ortofon SB-2 stroboscope and matching light source is essential for anyone with a turntable to precisely tune the speed of the turntable's rotation for listening to vinyl and can be used with any turntable where you can adjust the speed, including by way of moving an external motor or with a speed box that allows for fine tuning.

This fine tuning kit comes with a stroboscope record and light source. Simply place the stroboscope record on your turntable, turn on the motor and fine tune the speed whilst shining the light source onto the stroboscope record for an indication of when speed is correct. Includes rings for setting of both for 33 rpm and 45 rpm speeds and a switch for testing speed on either 50 Hz or 60 Hz motors.

As speed is a critical factor in getting the best sound from your vinyl, this is an essential analogue accessory.

Technical data
Dimension - 67 mm (W) x 68 mm (L) x 22 mm (H)
Weight - 130g (with battery)
Disc dimension - 100 mm (dia) x 1.0 mm (t)
Disc material - Stainless steel
Revolutions synchronised - 78 rpm, 45 rpm, 33-1/3rpm
Housing material - Aluminum extrusion
Battery - 2 x 1.5V (UM4)
Accuracy of oscillation circuitry - 1/100 Hz , (0.1%)

The Chinese Man "New Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.