DJ Equipment 1825 Items

AXA35

429,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Integrated Stereo Amplifier with (Built-in) Phono-Stage

• 35 Watts Power per Channel – for detailed performance at all volumes, ideal for smaller/medium sized rooms
• Built-In Phono Stage – to plug & play a vinyl turntable
• Slim Timeless Design – classic hi-fi size, with Lunar Grey aluminium trim
• Tone Controls – fine-tune sound to compensate for room dynamics
• Digital Display – white LED, clearly shows; source, volume & menus
• Headphone Socket – full size socket for high-quality after-hours listening
• Front Aux Input – 3.5mm socket to easily connect compatible devices

Sound Comes First
Our AXA35 integrated amp offers 35 watts per channel and has a built-in moving magnet phono stage – perfect for vinyl enthusiasts. A white LED dot matrix display confirms listening source, and separate tone controls mean you can adjust the sound to suit your taste. There’s a large ¼” (6.35mm) headphone socket too, ideal for high-quality listening without disturbing those who might not share your great taste in music.

Your Journey into Sound
AXA35 is the ideal amp to begin listening to music and really appreciating it – hearing detail in familiar tunes you’ve previously missed. That’s down to the toroidal transformer it uses, a tech found higher up our range. Choose a pair of speakers to suit your taste, perhaps they’ve been in the family for years or maybe something from our SX Series.

Release the Wheels of Steel
The built-in phono stage is the ace up AXA35’s sleeve. It means that you can plug a turntable straight in without any extra kit. Moving magnet (MM) compatibility means AXA35 works with a wide variety of turntables – including that vintage one you’ve had your eye on. Soon you’ll be playing the records you’ve been saving for, and planning what to buy next.

Setting the Tone
With separate bass and treble controls, you can fine-tune AXA35’s sound to suit your taste, speakers and room dynamics. The volume level is shown on the LED dot matrix display, and with 35 watts per channel you’ll have plenty of kick for smaller to medium sized rooms.

Wired for Sound
AXA35 is a well-connected amp, with no less than 4 pairs of RCA inputs, plus a pair of phono sockets for a turntable and a pair of recording outputs. There’s a rear USB socket for technical upgrades. Hi-fi quality speaker binding posts (connectors), compatible for banana plugs, mean that thick cable connects securely for an authentic sound.

Designed for Life
As with the rest of AX Series, AXA35 shares our house-style of Lunar Grey minimalist fascia, black steel cabinet and ‘floating’ base. This timeless look enables an upgrade path through our range. A slim build, in the classic 430mm hi-fi width, also means that AXA35 can easily slot, and breathe new life, into a much-loved system.

Technical specifications:
• POWER OUTPUT: 35 Watts (into 8 Ohms)
• THD (UNWEIGHTED): <0.01% @ 1kHz, 80% of rated power <0.15% 20Hz - 20kHz, 80% of rated power
• FREQUENCY RESPONSE (-3DB): 5Hz - 50kHz
• S/N RATIO (REF 1W): >82dB (unweighted)
• INPUT IMPEDANCES: 47k ohms
• POWER AMP DAMPING FACTOR: > 50
• MAX. POWER CONSUMPTION: 260W
• BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz
• STANDBY POWER CONSUMPTION: <0.5W
• INPUTS: 4x RCA, 1x Phono, 1 x 3.5mm Aux input (front panel)
• OUTPUTS: Speakers, Rec Out, USB 5V power
• DIMENSIONS (HXWXD): 83 x 430 x 335mm (3.3 x 16.9 x 13.2”)
• WEIGHT: 5.6kg (12.3lbs)
• IN THE BOX: AXA35 Integrated Amplifier, Power Cable, Remote Control, 2 x AAA Batteries

Go to Item

Ultimate Flight Case Set PLX9/SL1200 MK2 Plus (Laptop Shelf + Wheels)

419,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES:
• Fits: 2x Pioneer PLX-1000 / Technics SL1200 turntable and 1x Pioneer DJM-S7 Mixer + 1 x Laptop + Accessories
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Built-in corner wheels with high quality in-line skate bearings for convenient transport
• Adjustable laptop shelf
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

DIMENSIONS:
(Width x Height x Depth)

Outer: 134,5 x 51 x 23 cm
Inner turntable compartment: 45,4 x 38,7 x 7,6 cm
Inner mixer compartment: 47 x 27,7-39,5 x 7,6 cm

Weight: 25 kg | 55 lbs

Go to Item

Teac

W-1200

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The W-1200 is a double cassette deck featuring two, one-way cassette decks, mic mixing, a USB digital output and other versatile recording features. In recent times, cassette tapes have fascinated those whom have never used them, thanks to their warm, distinctly analogue sound, not to mention the ease of recording and the ability to create ‘mix-tapes’.

TEAC set out to create a cassette deck that combined an excellent level of performance with an interface that suits the digital audio era. Not only does the W-1200 offer sound that’s close to the original, it also has a wide range of versatile facilities that allow karaoke singing, the recording of conference minutes, and even the digital recording of analogue cassettes via a computer.

The two cassette decks support recording and playback on each as they have independent drive mechanisms, meaning owners can record on both decks simultaneously to make a pair of identical tapes at the same time. And mic input and mic mixing allow you to practice your Karaoke singing over a cassette tape or an external sound source (via LINE IN).

TEAC's decades of experience in making recording equipment are self-evident in the W-1200, particularly where the noise reduction system is concerned. It allows users to play back legacy cassette tapes originally recorded with Dolby B NR and hear them correctly. Moreover, the pitch control allows you to change playback speed to whatever’s considered appropriate while the level meters provided enable fine-tuning of recording levels. A timer REC/PLAY function is provided to allow use with a third-party audio timer.

Furthermore, the W-1200 can deliver digital audio at CD-quality (up to 48kHz/16-bit PCM) to a computer via a USB cable, allowing digital archiving of your cassette tape library. Once you’ve digitised them on a computer, you’re able to enjoy your old tape-based music library anytime anywhere via a network player, DAP, smartphone or even in your car.

Delivering a high standard of fidelity as a recording device, combined with advanced digital technologies, the W-1200 sets a new standard for double cassette decks in the modern age.

Dual cassette decks for REC/PLAY with independent mechanisms
Two simple and reliable one-way cassette mechanisms are employed. During playback (or recording) of TAPE1, users are able to change the cassette tape in TAPE2, preparing it to play (or record) next. Since both of the decks have independent drive sections for control, when one deck is playing (or recording) users are able to operate the other deck (changing tapes, fast forwarding or rewinding,) without affecting the operation of the first deck, ensuring continuity of playback or recording. Both decks support the playback of Normal (Type I), Chrome (Type II), and Metal (Type IV) tapes, while supporting recording on Normal and Chrome-type tapes.

Noise reduction system for playback of Dolby B tapes
The built-in noise reduction system suppresses the hiss noise that inherent in cassette tape playback. This allows cassette tapes that were recorded using Dolby B NR in the past to be played back with sound quality that is close to the original.

Pitch control and RTZ functions
TAPE1 is equipped with a pitch control that changes playback speed (in order to restore the playback sound on old tapes to the original key) by allowing the adjustment of tape speed by ±12%. Moreover, by combining the Pitch control and A-B Repeat play, users are able to make voices easier to understand at reduced tape speeds when transcribing recorded meetings and speeches. Furthermore, both TAPE1 and TAPE2 are equipped with Return-to-Zero (RTZ) functions that make returning to them to their "0000" counter positions easy with the press of a single button.

Parallel Recording for making identical tapes simultaneously
Parallel Recording makes a pair of identical tapes at the same time on TAPE1 and TAPE2. It is a convenient way to provide someone a copy of a tape right after making a recording.

Dual mode REC MUTE
The dual mode REC MUTE function allows users to erase unnecessary sections and to add spaces (silences) between tracks while recording. During recording or rec-standby, the W-1200 creates a 4- second ‘blank’ (which is a standard gap) between tracks simply by pressing the REC MUTE button once – press and hold it for more than 4 seconds and you can create a blank as long as you need.

Mic input and mic mixing for Karaoke and announcement applications
The mic input and mixing function allow users to mix mic sound and tape/aux sound, and to record mixed sound to a cassette tape. By adjusting the mic level, users are able to enjoy Karaoke performance, (useful for announcement-type applications) without an external mixer. Of course, recording the mic sound alone to a cassette tape is also supported. Combine that with the Parallel Recording facility and users can create a pair of identical tapes simultaneously, useful for making conference minutes, for example, one being the ‘master’ and another for distribution.

One-touch tape dubbing
With just the press of a button, users are able to duplicate cassette tapes, making a backup copy of the original tape. Users are also able to create silences between tracks by pressing the REC MUTE button during dubbing. This also serves as a simple editing system, by allowing the erasing of unwanted sections.

Fluorescent display with level meters
A fluorescent display with high contrast and high brightness is employed to show - in one place - all the information needed to operate the decks, including Left and Right level meters for full-fledged recording plus independent tape counters tor TAPE1 and TAPE2. The dimmer function allows users to adjust the brightness according to the environment.

USB digital out for digital recording on PC/Mac
The built-in A/D converter and a USB digital output on the rear panel allows users to digitally archive their cassette tape libraries, at 48kHz/16-bit CD-quality. The sampling frequency and bit depth are selectable from 8k to 48kHz and 8 or 16 bit, depending on recording quality of the original tape. Once a digital archive is created, users are able to listen to them anytime anywhere with a computer, DAP, smartphone, network player or even in a car.

Features at a glance
• Dual cassette decks for REC/PLAY on both decks with independent mechanism
• Noise reduction system suppresses hiss during playback (equivalent to Dolby B NR)
• Normal (Type I) and Chrome (Type II) tapes REC/PLAY (auto detect)
• Metal (Type IV) tape Play (auto detect)
• REC MUTE creates four second silences with one touch, or silences of other lengths as desired
• Mic input with mic mixing for karaoke and announcement applications
• One-touch dubbing for easy tape duplication
• Parallel (simultaneous) recording for recording to two tapes at the same time
• Timer REC/Play ready
• Four-digit digital tape counters
• RTZ (Return to Zero) function for one-touch return to the tape counter "0000" position
• Repeat play (playback stops after a maximum of 20 repetitions)
• ±12% pitch control
• Dimmable fluorescent display with level meters
• USB output for digital recording on PC/Mac *3
• RCA analogue input jacks
• 6.3mm (1/4") stereo headphone output jack
• Remote control included
• RoHS compliant

Included accessories
• Remote control
• AA batteris x2
• RCA audio cable x1
• Owner's Manual

Manual: https://www.teac-audio.eu/downloads/3/4/1/3/0/Manual_W-1200__EFS_.pdf

Go to Item

Pioneer DJ

DJM-250MK2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Mix instinctively with pro-grade features
The DJM-250MK2 has inherited some of the professional features of the popular DJM-900NXS2, such as the Magvel crossfader and Sound Color FX filter. Straightforward controls, a clear layout, and dedicated 3-band isolators let you scratch and mix instinctively.

The dithering technology on this mixer results in warm, high-quality audio from both analogue and digital sources. Plus its built-in sound card lets you connect the mixer to your PC/Mac and use rekordbox to perform with CDJs. Or hook up the DJM-250MK2 to turntables and use rekordbox in combination with our control vinyl to scratch and mix with digital files stored on your computer.

KEY FEATURES

Clear Layout & Magvel faders
The clear layout of the DJM-250MK2’s lower half gives you freedom to perform complicated scratch techniques. Our robust Magvel Faders ensure smooth control over long-term use. 2 metal shafts support the fader knobs, while the contact-free magnetic system is designed to endure millions of movements.

Smooth Mixing
Precise, fluid mixes are a breeze using the mixer’s channel faders, and the 3-band isolators give precision across the highs, mids and lows. You can use them to totally eliminate each frequency range when you turn the knob all the way to the left.

Flagship Filter FX
Each channel comes with its own dedicated Sound Colour FX filter, a feature inherited from the DJM-900NXS2 mixer. Simply turn the knob on each channel to apply the filter, Twist the parameter knob for texture, playing with resonance and tension.

Built in USB Sound Card
Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer’s hard drive.

Performance features
Unlock rekordbox performance features by simply connecting the unit to your PC/Mac. And, if you subscribe to the Creative plan, use Cloud Library Sync for seamless library management across multiple devices, and easily make custom versions of tracks in Edit mode.

DVS control
Make full use of rekordbox's low-latency DVS control for intuitive, smooth scratching.

High-quality sound
Whether you’re playing from digital or analogue sound sources, a warm, high-quality sound is created by the 64-bit digital signal processor using dithering technology.

Two headphone outputs
The DJM-250MK2 lets you plug both an ¼-inch stereo jack and 3.5-mm mini jack. Pick your size or attach 2 headphones when playing back-to-back.

Independent MIC section
Use a microphone and the AUX input at the same time.

Flexible connectivity
The XLR terminal and RCAs deliver premium sound quality on all connections. And the signal GND terminal easily attaches ground wires from analogue turntables.

TRAKTOR DVS control
This mixer supports DVS control of Native Instruments’ TRAKTOR PRO 3 DJ software. Plug your PC/Mac into this unit and use the TRAKTOR SCRATCH control media (control vinyl or CDs) to intuitively control and scratch with digital audio files stored on your computer.
Find out more about the Pioneer DJ Certified program.

Firmware Update Manager
You’ll be automatically notified when firmware updates become available. You can download the Firmware Update Manager.

SPECIFICATIONS

Main Features:
DVS Control:
• rekordbox

Accessories:
• DJM-250MK2
• Power cord
• AC adaptor
• USB cable
• Operating Instructions (Quick Start Guide)
• Warranty

Specifications:
• Width: 230 mm
• Height: 108 mm
• Depth: 320 mm
• Sampling Rate: 48 kHz
• A/D Converter: 24 bit
• D/A Converter: 24 bit
• Power Supply: AC adaptor (DC 12 V)
• S/N Ratio Line: 94 dB
• Frequency Range: 20 - 20000 Hz
• Distortion: < 0.005 % (LINE)

Channels:
• EQ/ISO: 3 band
• EQ/ISO Range: -∞ ~ +6 dB

Performance Control
• Channels: 2
• Sound Colour FX: Filter

Terminals:
Inputs:
• 3 LINE (RCA)
• 2 PHONO (RCA)
• 1 MIC (1/4 inch TS Jack)
Outputs:
• 1 MASTER (XLR)
• 1 MASTER (RCA)
• 2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)
USB:
• 1 USB B port

Go to Item

2M Bronze Verso MM-Tonabnehmer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze features:

The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Bronze
Cartridge weight - 7.2 g
Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Go to Item

Flux + UDG Creator Hardcase (HHV Bundle)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Reloop - Flux + UDG Creator Hardcase (HHV Bundle)
The Bundle contains 1x Reloop - Flux and 1x UDG Creator Hardcase.

RELOOP FLUX - 6X6 IN/OUT USB-C DVS INTERFACE FOR SERATO DJ PRO

We are excited to introduce the Reloop Flux: A next-generation 6x6 In/out USB-C DVS Interface for Serato DJ Pro. It can transform any conventional mixer into a professional digital vinyl system.

BACK TO THE MUSIC
The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

MAXIMUM FLEXIBILITY
Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato DJ Pro´s internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

FULL CONTROL
The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

HUB INSIDE
The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

STUDIO QUALITY – ANYTIME, ANYWHERE
The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it’s a superior DVS interface which could also be used as an audio interface in the studio.

ALWAYS POWERED
The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

ROBUST AND ROADWORTHY
The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

PLUG & PLAY FOR SERATO DJ Pro
The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

FEATURES:
• 3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96kHz with high-quality D/A converters for superior audio processing
• Also functions as a stand-alone studio interface for recording and playback audio
• 3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• 3x line outputs, including AUX-Out, assignable to the Sampler
• Easy, accessible direct thru buttons for analogue deck playback
• All terminals are visible from the top of the unit for easy installation in dark surroundings
• Bus-powered cable connection for power and audio
• Optional USB-C DC in port for external power supply
• Power delivery support for USB-C devices (max 60W)
• Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
• Power LEDs on the top panel for connection status (Hub, PD, DC)
• 2-port USB-A hub for connecting further accessories
• Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
• Highly robust, extended edge design to protect connection terminals
• Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
• Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

TECHNICAL DATA:
Power:
• USB bus powered: Yes
• Recommended power: 2 A or higher / minimum power: 400 mA
• Maximum USB-PD throughput: 60 W
• Maximum USB Hub power output: 2 x 0.8 A = 8 W
• Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
• Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
• S/N Ratio (output reference level 1 kHz, +4 dB):
• Deck In (LINE signal input: 0 dBV): More than 83 dB
• Deck In (PHONO signal input: -32 dBV): More than 73 dB
• THD + N:
• LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
• PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)

Maximum Gain:
• Deck In (LINE): +4 dB ± 2 dB
• Deck In (PHONO): +36 dB ± 2 dB
• Maximum Input (1 kHz, THD=1%):
• Deck In (LINE): More than +7 dBV
• Deck In (PHONO): More than -25 dBV
• Maximum Output (1 kHz, THD=1%):
• Deck Output: More than +11 dBV

USB:
• USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
• USB 2.0 high-speed (480 Mbit/s)
• Class-compliant on macOS
• USB Power Delivery Protocol 3.0

General:
• Dimensions (WxDxH): 160 x 120 x 34 mm
• Weight: 0.85 kg

Accessories:
• User Manual
• 1x USB type C/C cable
• 1x USB type C/A cable
• 2x RCA cables

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/5/245389_Reloop_IM.pdf

UDG - Creator Reloop Flux Hardcase

A Digital DJ/ Producer looking for a professional, durable case solution for your Reloop Flux? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Reloop Flux, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

Weight 0,20 kg / 0.44 lbs
Outer Dimensions (W x H x D) 21.0 x 18.5 x 6.2 cm | 8.3 x 7.3 x 2.4 inch
Inner Dimensions (W x H x D) 16.0 x 13.0 x 5.2 cm | 6.3 x 5.1 x 2.0 inch
Material Durashock molded EVA foam
Protection Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam
Extra's Easy grip zipper pulls
Fits Reloop Flux

Go to Item

Ecler

Nuo 2.0

415,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the mixed music style.
Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features!

Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.

Key features:
• 2 mixing channels
• 1 MICRO/LINE channel
• 2 PHONO inputs
• 3 LINE inputs
• Master output XLR and RCA
• Booth output RCA
• 3 band full cut EQ
• Extra large ergonomic EQ knobs
• 3 band EQ kill switches
• FX Send control per channel
• FX Pre/Post fader selector
• 45mm long life VCA faders
• 45mm long life VCA crossfader
• Fader and crossfader shape adjustment
• Crossfader Reverse and Cut-In
• Crossfader suitable for ETERNAL

Technical data:
• Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kΩ
PHONO: -40dBV/50kΩ
MICRO: -50dBV/>1kΩ
FX RETURN: 0dBV/>6kΩ

• Outputs Level/Minimum Load:
MASTER (BAL): 0dBV/600Ω 1V *(+6dB 2V)
MASTER (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
BOOTH (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ

• Frequency Response:
LINE: 10Hz÷30kHz -1dB
MICRO: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB

• THD+N:
LINE: <0.07%
MICRO: <0.1%
PHONO: <0.15%
FX RETURN: <0.05%

• CMRR:
MICRO: >70dB @ 1kHz

• Signal Noise Ratio:
LINE: >95dB
MICRO: >85dB
PHONO: >90dB
FX RETURN: >100dB

• Gain control:
INPUTS 1-2: ± 15dB
INPUT 3: ± 20dB

• Tone control Inputs 1-2:
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

• Tone control Input 3:
BASS: ± 15dB
TREBLE: ± 15dB

• Kill Filter, cut frequency at –6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz÷6.8kHz
TREBLE: 6.8kHz

• Phantom voltage: +18VDC/5mA max.
• Mains: 90-264VAC 47-63Hz
• Power consumption: 30VA
• Dimensions: 370x165x80mm
• Weight: 3kg

Go to Item

Concorde MkII Elite Single

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Concorde Elite is a premium moving magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Created with passion, combined with technology and close attention to detail, every feature of the Concorde Elite brings you a limitless experience with the music you love.

We have created a cartridge characteristic of Ortofon’s pioneering approach to design and years of extensive knowledge of reproducing music as it was meant to be heard. Owing to the upgrades of components, the Elite achieves a new level of sound quality not previously found in DJ categorized cartridges.

The Concorde Elite features a new, special-molded stylus body with real gold plating. Encased by the gold is a Nude Elliptical diamond mounted on a rigid Aluminum-Magnesium cantilever. The nude diamond stylus, you normally will find in HiFi cartridges, delivers a sound so powerful and detailed, you will experience a remarkable level of live performance.

The properties of the Rigid 750 µm Aluminum-Magnesium Cantilever, exclusively developed for the Concorde Elite, ensure that the stylus picks up the groove vibrations with a stable and accurate trace performance, and provides the ideal interface between the stylus and armature.

In the armature, you’ll find a Unique Coil System transmitting the diamond’s movements to deliver an optimized output. The engineering of the coil system provides the Elite with a powerful, full-bodied sound of high quality and high output.

To ensure superior tracking performance, a new Rubber Suspension has been developed. The new rubber compound formula has been developed uniquely for the Concorde Elite to attain the desired characteristics for an extraordinary performance of the cartridge.

Output voltage at 1000 Hz, 5cm/sec. - 8,5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3 dB - 20 – 20,000 Hz
Tracking ability at 315Hz - 100 μm
Compliance, dynamic lateral - 13 μm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 μm
Tracking force range 2.0-4.0 g
Tracking force recommended - 3.0 g
Tracking angle - 20°

Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 800 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-400 pF
Cartridge weight excluding screws - 18.5 g
Cartridge colour (body/stylus) - Black / Gold

Go to Item

E1 BT (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 BT (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2M Bronze MM-Tonabnehmer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

RMX-44 BT

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MULTI-FUNCTIONAL
The Reloop RMX-44 BT is a 4-channel Bluetooth DJ club mixer in classic design, including a Bluetooth input with cue function, which offers numerous application possibilities. The intuitive Club mixer layout guarantees a simple overview and allows experienced artists to find their way around immediately.

FLEXIBLE USABILITY
With 9 inputs and 4 outputs, as well as a 3-band EQ and bipolar filter unit per channel, the RMX-44 BT is not only a full-fledged DJ club mixer, but thanks to Bluetooth compatibility and the 2-band EQ microphone section with talk-over function, it is also ideal for bars, mobile DJs and home setups.

UNIVERSAL CONNECTIVITY
Thanks to the Smart Connectivity Bluetooth input, Smartphones, laptops as well as iPad’s and other devices can be connected quick and easily. In combination with its numerous other connection opportunities, the RMX-44 BT is up to any challenge and adapts perfectly to any application.

FREQUENCY MIXING IN DIGITAL SOUND ARCHITECTURE
For creative frequency mixing, the RMX-44 BT offers dedicated, bi-polar sound filters per channel to allow smooth low- and high-pass fading. The fully digital sound architecture enhances your sound to be clear and punchy in every situation.

HIGH QUALITY DESIGN
The sturdy metal construction and scratch-resistant surface with a deep black metallic finish make the RMX-44 BT extremely durable, despite frequent use and transport. The fabrication meets the industry’s highest quality standards and is visually and haptically particularly attractive. In addition, the stylish and timeless design blends perfectly into any DJ setup.

FEATURES
• 4-channel Bluetooth DJ club mixer
• 9 inputs, 4 outputs
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs
• Smart connectivity Bluetooth input with cue function
• 3-band EQ
• Sound filter, bi-polar filter unit with LPF and HPF
• High-quality surface in deep black metallic
• Fully digital architecture for outstanding sound
• Sturdy metal construction
• RMX Innofader compatible
• Crossfader curve adjust
• Mic channel with 2-band EQ & talk-over ''Active Ducking Technology'' for mic channel
• Headphones output (6.3 mm jack)
• Incl. power cord, instruction manual

TECHNICAL DATA
• Frequency range 20 Hz – 20kHz
• Inputs: 2x Phono RCA, 6x Line RCA, 1x Mic XLR/Jack
• Outputs: 1 Master XLR (balanced), Master RCA (unbalanced), Booth RCA (unbalanced), Rec RCA (unbalanced), headphones (6,3 mm jack)
• EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
• Dimensions: 320 x 106.4 x 379.4 mm
• Weight: 5,4 Kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/3/243591_Reloop_IM.pdf

Go to Item

Tube Box S2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Go to Item

Tube Box S2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Pioneer DJ

PLX-500

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

Go to Item

Pioneer DJ

PLX-500

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde Music Bronze

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

Go to Item

2MR Bronze

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Go to Item

Jetpack

Glide Controller Trolley

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dual

CS 329

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

Go to Item

Jetpack

Drop System

389,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RMX-33i

389,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FEATURES
•3 (+1) Channel Digital Effect Mixer
•Fully digital architecture for outstanding sound and flexibility
•4 Instant Sound Colour Effects per channel (Filter, White Noise, Bit Crush & Gate)
•iPad / tablet / smartphone audio split-input
•EQ-setting for classic or isolator (kill)
•45 mm club line & crossfader
•Fader-start, reverse & curve control
•Innofader compatible
•Mic channel with 2-band EQ and auto talkover (active ducking technology)
•2 headphones outputs (6.3 mm jack and 3.5 mm jack)
•Balanced (XLR) and unbalanced (RCA) outputs
•Altogether 10 inputs (2x phono, 7x line, 1x combo-mic)
•Altogether 5 outputs (1x XLR, 2x RCA, 2x headphones)
•Club quality sound & built
•Optional Reloop RMX Innofader accessory by Audio Innovate available
•Incl. Smartphone / Tablet Audio Split Cable and International Power Supply

TECHNICAL DATA
•Inputs: 2 Phono, 7 Line, 1 Combo-Mic
•Outputs: 1x XLR, 2x RCA, 2x headphones
•Frequency range: 20 Hz - 20 kHz
•EQ range classic: +12 dB / -8 dB
•EQ range isolator: +12 dB / -26 dB (Total Kill)
•Dimensions: 254 x 104 x 355 mm
•Weight: 3,8 kg

Go to Item

Ultimate Flight Case Rane Four Plus (Laptop Shelf + Wheels)

379,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• 1 x Rane Four + 1 x Laptop + Accessories

Specifications:
• Weight: 16,00 kg / 35.2 lbs
• Outer Dimensions (W x H x D): 89.0 x 53.1 x 23.3 cm | 35.0 x 20.9 x 9.2 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 9.0 cm | 30.8 x 15.4 x 3.5 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Nagaoka

MP-150 - Cartridge

379,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

Go to Item

AT-LP5X

379,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP5X
Fully Manual Direct Drive Turntable
Building on Audio-Technica’s analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.

The LP5x retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and ’70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.

Direct-drive, low noise motor
Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM
AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus
Lightweight AT-HS6 headshell
J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input
Anti-resonance, die-cast aluminum platter
Heavy rubber damping mat for improved low-frequency reproduction
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Elegant matte black finish
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable
Included dust cover and mounting hardware

Specifications

Drive Method Direct Drive
Type 3-speed, fully manual operation
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum
Starting Torque >1.0 kgf.cm
Braking System Electronic brake
Wow and Flutter <0.2% WRMS (33 RPM) at 3 KHz
Signal-to-Noise Ratio >50 dB
Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE 250 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized MC: 56dB nominal, RIAA equalized
USB Function A/D, - 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface - USB 2.0 compliant Windows 7 or above, MAC OS X or above
Power Supply Requirements 100-240V AC, 50/60 Hz
Power Consumption 3 W
Dimensions 450.0 mm (17.72") W x 352.0 mm (13.86")D x 157.0 mm (6.18")H
Weight 7.3 kg (16.1 lbs.)
Accessories Included AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus; AT-HS6 lightweight headshell; AC adapter ; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; dust cover with hinges.

Manual: https://eu.audio-technica.com/resources/AT-LP5X_UM_162501850_V1_EN_web_190927.pdf

Go to Item

Marshall

Tufton

369,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Tufton packs 20+ hours of portable playtime, allowing you to go further for longer. Bluetooth® 5.0 technology allows you to connect to a variety of wireless devices with a range of 10 m. Tufton’s 3-way design and rear-facing driver produce a clear and articulate sound across all frequencies. Tufton utilises True Stereophonic, a unique form of multi-directional sound from Marshall.

TUFTON KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Water-resistant (IPX2)
• Carrying strap

MARSHALL SIGNATURE SOUND
Tufton is the mightiest portable speaker from Marshall. It’s engineered as a 3-way system, producing sound from three separate drivers from the front of the speaker. An additional mid-range driver is located on the rear of the speaker, offering a clear and articulate sound across all frequencies.

TRUE STEREOPHONIC (360° SOUND)
Tufton utilises True Stereophonic, a unique form of multi-directional sound from Marshall. Experience absolute 360° sound where every spot is a sweet spot.

ICONIC & RUGGED DESIGN
Echoing the legacy of rock ‘n’ roll, Tufton features the iconic Marshall script and has a solid metal grille that pays homage to the steel mesh grille found on many microphones. It also has flush-mounted corner caps, making it an extremely rugged and durable speaker. Tufton is a behemoth of sound made for the open road.

20+ HOURS OF PORTABLE PLAYTIME
Bring the show on the road with Tufton. It offers 20+ hours of portable playtime on a single charge. You can even track the speaker’s battery life with the visual battery indicator located on the top panel of the speaker.

WATER-RESISTANT (IPX2)
The road is full of surprises, which is why Tufton offers a water-resistant design. Its IPX2 rating means it’s able to withstand a little water.

CARRYING STRAP
Tufton was designed for easy portability. Its guitar inspired carrying strap makes it perfect to take with you, wherever you go.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IPX2
• DIMENSIONS: 229 X 163 X 350 MM / 9.02 X 6.42 X 13.78 IN

BOX CONTENTS
• TUFTON PORTABLE STEREO LOUDSPEAKER
• POWER CORD
• QUICK START GUIDE
• LEGAL AND SAFETY INFORMATION

Go to Item

SX60

369,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Standmount Speakers

• 25mm silk dome tweeter – for refined presentation
• 165mm treated paper cone – for a smooth & even frequency response
• Precisely optimised crossovers – for a neutral, phase linear, response
• CAD modelled rigid MDF cabinet – reduces standing waves, keeping internal vibration to a minimum
• Refreshed clean design – designed to complement today’s interiors

SX60. Sound Comes First
SX60 standmount speakers build on the strengths of SX50, taking on a larger form-factor for an assured musical performance. They can work happily in bigger spaces, while still offering you flexibility in terms of placement. Speaker stands or a cabinet top, it’s your call. SX60’s combination of engineering, confident sound reproduction, and price makes them a winning combination.

Rock Solid Foundations
Hi-fi speaker engineering starts with the cabinet. Computer-aided design (CAD) was used extensively to refine SX60’s internal structures, to ensure that while the drivers are vibrating with your music, the cabinet isn’t. This means that every millimetre of movement from the drivers is directed where it should be – at you.

Stand and Deliver
SX60 speakers have a 165mm (6.5") woofer made from treated paper. Hi-fi manufacturers have used it for years, as paper’s impressive strength-to-weight ratio is matched by excellent tonality – so instruments sound rich, well defined, and real. 25mm (1") soft dome tweeters, made from treated silk, take care of the higher frequencies – with the same balance of realism and refinement.

Two Drivers, One Voice
Our team in London took great care and attention when designing the crossovers in SX60 – as they’re responsible for ensuring that each driver receives the correct frequency. Accuracy of timing and stereo imaging depend on phase remaining completely linear, from top to bottom. The result? Your music sounds engaging, energetic and real.

Engineered, Front to Back
Attention to detail on SX60 runs from front to back. There’s a neat bass reflex port, directly under the woofer, which emphasises lower frequencies to provide rich engaging sound. Spin SX60 around to reveal a pair of high-quality speaker binding posts (connectors), which can accept thick speaker cable – with or without banana plugs.

Designed for Real Life
New look SX60’s clean, understated design allows them to sit in a variety of spaces, and work well in all. Leave the grilles on to protect the drivers from little fingers, or to gain acceptance from your interior designer – alternatively take them off to celebrate your great taste in music (and speakers).

Technical specifications:
• SENSITIVITY: 89dB
• FREQUENCY RESPONSE: 41Hz - 22 kHz
• IMPEDANCE: 8 Ohms
• RECOMMENDED AMPLIFIER POWER: 20-100 watts
• DRIVERS: Tweeter: 1 x 25mm (1") silk dome tweeterMid/Bass: 1 x 165mm (6.5") doped paper cone
• CROSSOVER: 2 way
• PORTED: 1 front
• COLOUR: Black Matte
• DIMENSIONS (HXWXD): 340 x 200 x 272mm (13.3 x 7.9 x 10.7")
• WEIGHT: 5.0kg (11lbs)

Go to Item

Flux

365,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RELOOP FLUX - 6X6 IN/OUT USB-C DVS INTERFACE FOR SERATO DJ PRO

We are excited to introduce the Reloop Flux: A next-generation 6x6 In/out USB-C DVS Interface for Serato DJ Pro. It can transform any conventional mixer into a professional digital vinyl system.

BACK TO THE MUSIC
The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

MAXIMUM FLEXIBILITY
Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato DJ Pro´s internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

FULL CONTROL
The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

HUB INSIDE
The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

STUDIO QUALITY – ANYTIME, ANYWHERE
The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it’s a superior DVS interface which could also be used as an audio interface in the studio.

ALWAYS POWERED
The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

ROBUST AND ROADWORTHY
The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

PLUG & PLAY FOR SERATO DJ Pro
The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

FEATURES:
• 3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96kHz with high-quality D/A converters for superior audio processing
• Also functions as a stand-alone studio interface for recording and playback audio
• 3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• 3x line outputs, including AUX-Out, assignable to the Sampler
• Easy, accessible direct thru buttons for analogue deck playback
• All terminals are visible from the top of the unit for easy installation in dark surroundings
• Bus-powered cable connection for power and audio
• Optional USB-C DC in port for external power supply
• Power delivery support for USB-C devices (max 60W)
• Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
• Power LEDs on the top panel for connection status (Hub, PD, DC)
• 2-port USB-A hub for connecting further accessories
• Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
• Highly robust, extended edge design to protect connection terminals
• Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
• Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

TECHNICAL DATA:
Power:
• USB bus powered: Yes
• Recommended power: 2 A or higher / minimum power: 400 mA
• Maximum USB-PD throughput: 60 W
• Maximum USB Hub power output: 2 x 0.8 A = 8 W
• Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
• Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
• S/N Ratio (output reference level 1 kHz, +4 dB):
• Deck In (LINE signal input: 0 dBV): More than 83 dB
• Deck In (PHONO signal input: -32 dBV): More than 73 dB
• THD + N:
• LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
• PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)

Maximum Gain:
• Deck In (LINE): +4 dB ± 2 dB
• Deck In (PHONO): +36 dB ± 2 dB
• Maximum Input (1 kHz, THD=1%):
• Deck In (LINE): More than +7 dBV
• Deck In (PHONO): More than -25 dBV
• Maximum Output (1 kHz, THD=1%):
• Deck Output: More than +11 dBV

USB:
• USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
• USB 2.0 high-speed (480 Mbit/s)
• Class-compliant on macOS
• USB Power Delivery Protocol 3.0

General:
• Dimensions (WxDxH): 160 x 120 x 34 mm
• Weight: 0.85 kg

Accessories:
• User Manual
• 1x USB type C/C cable
• 1x USB type C/A cable
• 2x RCA cables

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/5/245389_Reloop_IM.pdf

Go to Item

Ultimate Flight Case Rane Four Plus (Wheels)

359,99 €*

Multi-Format Case Player/Mixer (V10/A9) Set

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/ hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Wheels) also features roller wheels with high quality in-line skate bearings for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• Rane Four Controller

Specifications:
• Weight: 14,50 kg / 31.9 lbs
• Outer Dimensions (W x H x D): 85.4 x 53.1 x 21.3 cm | 33.6 x 20.9 x 8.4 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 8.4 cm | 30.8 x 15.4 x 3.3 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Magma

359,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

• Pioneer DJM-V10
• Pioneer DJM-A9
• Pioneer DJM-900 NXS2
• Pioneer DJM-900 NXS / SRT
• Pioneer DJM-800 / 700 / 600
• Pioneer CDJ-3000
• Pioneer CDJ-2000 NXS2
• Pioneer CDJ-2000 NXS
• Pioneer CDJ-900 / 850 / 800
• Pioneer XDJ-1000
• Allen & Heath PX5
• Allen & Heath DB4
• Allen & Heath DB2
• Allen & Heath Xone 92 / 62 / 43C
• Denon LC 6000 Prime
• Denon SC-6000 / SC-6000M
• Denon SC-5000 / SC-5000M
• Denon X1850 / X1800
• Denon X1600
• Denon SC3900
• Denon SC2900
• Reloop RMX-90 DVS
• Reloop RMX-80 Digital
• Ecler Warm 4
• Ecler NUO4
• Rane MP2015
• Rane Sixty-Eight / Sixty-Four

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Solid aluminum profiles and spring loaded latches
• Additional foam to fit various mixer and CD-player models
• 3 removable front panel covers
• Convenient cable access ports
• Full padded interior
• Incl. recessed wheels for easy transportation

SPECS:

• Outer measures: 80 x 59 x 22,5 cm
• Inner measures: 33,1 x 42,5 x 8,4 cm (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
• Weight: 21,5 kg

Go to Item

Thorens

MM-008 ADC

359,10 €* 399,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP120XBT

359,00 €*

Multi-Format Battle-Workstation

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This fully manual turntable is modeled after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.

Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.

The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

High-fidelity audio with Bluetooth® wireless technology

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable

Compatible with the high-quality Qualcomm® aptX™ audio codec

Built-in switchable phono preamplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor DC servo motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminum
Anlaufmoment >1.0 kgf.cm
Bremssystem Electronic brake
Gleichlaufschwankung <0.2% (WTD) @ 3 kHz (JIS)
Rauschabstand >50 dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
Phono-Vorverstärkung 36 dB nominal, RIAA equalized
USB-Funktionen A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above
Betriebsspannung 100 to 240 V, 50/60 Hz, 1.5A Max
Power Consumption 2.75 W
Abmessungen 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Gewicht 8 kg (17.6 lbs.), without dust cover
Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
Tonearm Type Balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5 mm
Overhang 16 mm
Tracking Error Angle Less than 3 degrees
Applicable Cartridge Weight 3.5-8.5 g
Anti-skating Range 0-4 g
Replacement Stylus AT-VMN95E
Communication System Bluetooth Version 5.0
Maximum Communication Range Line of sight - approx. 10 m (33')
Compatible Bluetooth Profile A2DP
Support Codec SBC, Qualcomm® aptX™ audio

Manual: https://www.audio-technica.com/media/wysiwyg/product/pdfs/eu/AT-LP120XBT-USB_UM_162501910_V2_EN_web_200826.pdf

Go to Item

Magma

359,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

One size fits all! The new Multi-Format Battle-Workstation is a protective and flexible solution for the touring DJ that needs to transport a 10’’ battle-mixer along with two turntables or the new Rane Twelve players. The practical multi-format design includes several foam strips to accommodate various 10’’ battle-mixer and turntable models from Pioneer, Rane, Technics etc. Thanks to its removable front panel covers, the useful cable access ports and the extra wide gliding laptop platform, the workstation is ready for action in no time at all as the equipment does need not to be removed from the case anymore. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

Turntables:
• Technics 1200/1210 G
• Technics 1200/1210 GR
• Technics 1200/1210 MK2
• Rane Twelve
• Rane Twelve MK2
• Audio Technica LP120-USB
• Audio Technica LP1240-USB
• American Audio Power Drive 2
• DJ-Tech SL-1300MK6
• Denon VL12
• Epsilon DJT-1300
• Mixars STA
• Numark TTX
• Numark CDX
• Pioneer PLX-1000
• Pioneer PLX-500
• Reloop RP-8000
• Reloop RP-7000
• Reloop RP-6000
• Reloop RP-4000
• Reloop RP-2000
• Roland TT-99
• Stanton ST-150
• Vestax PDX 3000

Mixers:
• NI Kontrol Z2
• Mixars Duo
• Pioneer DJM-S11
• Pioneer DJM-S7
• Pioneer DJM-S9
• Pioneer DJM-909
• Pioneer DJM-707
• Rane Seventy-Two
• Rane Sixty-Two
• Rane Sixty-One
• Rane TTM57 MK2
• Rane TTM57 SL
• Rane TTM-56
• Rane MP-2014
• Reloop Kut
• Reloop Elite
• Thud Rumple TRX
• Vestax PMC-07
• Vestax PMC-05

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Incl. recessed wheels for easy transportation
• Solid aluminum profiles and spring loaded latches
• Secure ball corners
• Solid rubber-feet
• Convenient cable access ports
• Additional foams to fit various mixer and turntable models

SPECS:

• Outer dimensions: 116 x 57 x 24 cm
• Inner dimensions: 37 x 52 x 8,3 cm (Turntable-compartment), 29 x 52 x 8,3 cm (Mixer compartment)
• Weight: 25 kg
• Color: black/black (Item-No.: 41017 / EAN-Code: 4041212410177)

Go to Item

T1 (Ortofon OM 5E)

350,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Go to Item

Duo (MC- & MM-Phono-Vorverstärker)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moving Coil & Moving Magnet Phono Preamp

Squeeze every inch of detail from your record collection with our highest quality moving magnet and moving coil phono stage, with integrated headphone amp; the Duo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Duo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Preamplifier?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Duo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge turntable. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Vinyl. Just for You
Enjoy the warmth of vinyl privately thanks to Duo’s integrated headphone output. Uniquely, we integrated a 6.35mm headphone jack directly into the phono stage, so you can still enjoy your records when there’s no option to play out loud.
The integrated headphone output also means no need to turn on your amplifier just to power your headphones, resulting in a more eco-friendly listening experience.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Duo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• CARTRIDGE SUPPORT: Moving Magnet | Moving Coil
• GAIN @ 1KHZ: MM: 39dB | MC: 60dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: MM: 3.35mV | MC: 305uV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): MM: ~0.09uV | MC: ~0.08uV
• RIAA CURVE ACCURACY: +/- 0.3dB 30Hz-50Hz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): MM: >90dB | MC: >70dB
• THD+N 1KHZ (20-20KHZ BW): MM: <0.0025% | MC: <0.20%
• INPUT IMPEDANCE: MM: 47k Ohms | MC: 100 Ohms
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @ 10KHZ: MM: >85dB | MC: 75dB
• DIMENSIONS (H X W X D): 48 x 215 x 159 mm (1.9 x 8.5 x 6.2")
• WEIGHT: 0.95kg (2.1lbs)
• WHATS IN THE BOX?: Alva Duo Moving Coil & Moving Magnet Phono Preamp, User Manual, Safety Guide, Mains Lead

Go to Item

Teac

TN-280BT

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2-speed Analog Turntable with Phono EQ and Bluetooth
A wireless turntable for new way of enjoying vinyl records

The TN-280BT is not only a great-sounding turntable for music enthusiastic who wants to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records

The TN-280BT also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.

The belt-drive motor on the TN-280BT reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.

For music enthusiasts who want to hear every sensuous note of their vinyl collection.

Main Features

2-speed Belt-drive turntable
Built-in Bluetooth transmitter
Built-in MM phono equalizer and Phono, Line, and Bluetooth outputs
High-performance MM cartridge included (Made in Japan)
Aluminum die-cast platter
Anti-skating mechanism
High-density MDF cabinet for better vibration and resonance

Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.2%
Signal-to-Noise Ratio more than 67 dB (A-weighted)
60 dB (unweighted, 20kHz, LPF)
Turntable (Platter)
Material Aluminum Die-cast
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Length 223 mm
Stylus Pressure Range 0 to 5 g
Compatible Cartridge 3.5 to 6.5 g
Anti-skating Adjustment Supported
Head-shell and Cartridge sections
Type MM-type
Stylus Shape Elliptical
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Output Impedance 47k ohms
Output Voltage 4.5 mV (+/-3dB)
Stylus Pressure 2.0 g (+/-0.5 g)
Cartridge Weight 5.7 g (+/- 0.5 g)
Head-shell Weight 10 g (including nuts, screws, and wires)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 4.5 mV (+/-3dB)
LINE 120 mV (-13dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

General
Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.5 Watts or less
Dimensions (W x H x D) 420 × 117× 356 mm / 16.5” x 4.6” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Felt Mat x 1
EP Adapter x 1
Counter Weight x 1
Head-shell x 1 (MM-type cartridge installed)
Turntable (Platter) x 1
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

Go to Item

Speaker Box 3E Carbon (Paar)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MC Quintet Red

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Enter the Exclusive world of Ortofon’s famous moving coil sound!
The Quintet Red is a perfect introduction to the world of Ortofon moving coils.
It features an Elliptical diamond which is cut and polished to Ortofon’s standards.

This entry-level MC cartridge has very high price-to-performance ratio and is a perfect all-rounder for the newcomers to the world of Moving Coil cartridges.

MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The ST-7 transformer is a perfect match for the MC Quintet Red cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.

MC Quintet Red Technical data:
• Output voltage at 1 kHz 5 cm/sec - 0.5 mV
• Channel balance - < 1.5 dB
• Channel separation at 1 kHz - > 21 dB
• Channel separation at 15 kHz - > 14 dB
• Frequency response 20-20.000 Hz - +/-2.5 dB
• Tracking ability at 315 Hz at recommended tracking force *) - 65 μm
• Compliance, dynamic, lateral - 15 μm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 μm
• Tracking force range - 2.1-2.5 g (21-25 mN)
• Tracking force recommended - 2.3 g (23 mN)
• Tracking angle - 20º
• Internal impedance, DC resistance - 7 Ohm
• Recommended load impedance - >20 Ohm
• Cartridge body material - ABS/Aluminium
• Coil wire material - Copper
• Cartridge colour - Red
• Cartridge weight - 9 g
*) Typical value

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for Quintet cartridge.

Ease of use
Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell.

The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

Go to Item

Sumiko

Moonstone MM-Tonabnehmer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Chateau Vinyl Nylon (75)

348,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl | nylon black stealth edition

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified original cordura® nylon fabric, water-repellent

colour: black

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

AT-LPW50PB

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Fully Manual Belt-Drive Turntable
•Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Motor with speed-sensor system to maintain accurate platter rotation speed
•Adjustable dynamic anti-skate control
•High-isolation, height-adjustable feet
•Professional anti-resonance, die-cast aluminum platter with rubber mat
•AT-HS4 ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Adjustable dynamic anti-skate control
•AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
•Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
•High-isolation, height-adjustable feet
•AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Drive Method: Belt-Drive
Type: 2-speed, fully manual operation
Motor: DC servo with Active Speed Stabilization
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Signal-to-Noise Ratio: > 60 dB
Output Level: Pre-amp: "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements: 100 to 240 V, 50/60 Hz
Power Consumption: 220 V 50 Hz
Working: 1.3 W
Motor off: 1.1 W
Power off: 0.1 W
Dimensions: With dust cover 126.0 x 420.0 x 340.0 (H x W x D mm) Without dustcover and hinges:114.0 x 420.0 x 340.0 (H x W x D mm)
Weight: 4.81 kg (without dustcover)
Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus in black
• Detachable RCA output cable (dual RCA male to dual RCA male)
• Platter
• AC adapter
• 45 RPM adapter
• Counterweight
• Turntable mat
• Removable hinged dust cover

Manual: https://www.audio-technica.com/cms/resource_library/literature/e89c31b269914a97/at_lpw50pb_um_162502020_v1_en_web_191220.pdf

Go to Item

Jetpack

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RP-4000 MK2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

•Quartz-driven DJ turntable with high-torque direct drive
•Powerful motor with more than 1.8 kg/cm torque
•Redesigned metal top panel, tactile buttons and reinforced housing construction

FEATURES
•NEW in the MK2 version:
•Newly developed top panel and reinforced housing construction
•Reworked metallic buttons with improved feel & tactile response
•Precision Pitch with selectable ranges of +/-8 % & +/-16 %
•Tempo reset (Quartz Lock) feature
•Superior finish in deep black metallic
•Quartz-driven DJ turntable with high-torque direct drive
•Designed for professional use
•Powerful brushless DC motor with more than 1.8 kg/cm torque
•Precise motor control with 3 speeds selectable (33 1/3, 45 & 78 rpm)
•Reverse function: switch for forward/reverse playback
•Precision-engineered die-cast aluminium platter with stable rotation
•Statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•Extendible needle illumination
•Shock-absorbing feet for vibration isolation
•Sturdy, heavy construction with optimized damping features
•Prepared for dust cover (available as optional accessory)
•Incl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, instruction manual

TECHNICAL DATA

Turntable:
•Type: direct drive turntable
•Drive: quartz-driven high-torque direct drive
•Motor: 8-pol., 3-phase, brushless DC motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 rpm)
•Starting torque: > 1.8 kg/cm
•Brake time: < 1 sec.
•Start-up / rpm change: < 1 sec.
•Wow and flutter: < 0.2 % WRMS
•Signal-to-noise ratio: > 50 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: aluminium die-cast
•Diameter: 332 mm

Tone arm:
•Type: universal, statically balanced, s-shaped
•Effective length: 230.5 mm
•Overhang: 16 mm
•Tracking angle error: < 3°
•Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)
•Anti-skating range: 0 – 7 g

Connections:
•1x PHONO out (gold-plated), 1x GND

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 12 W
•Dimensions: 450 (w) x 352 (d) x 144 (h) mm
•Weight: appr. 9.8 kg

Go to Item

Teenage Engineering

EP-1320 medieval

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

EP–1320 medieval - The world’s first medieval electronic instrument

Hurdy gurdys, lutes, gregorian chants, thundering drums and punishing percussive foley fx. The EP–1320 is the first of its kind: featuring a large library of phrases, play ready instruments and one-shot samples from an age where darkness reigned supreme, the instrumentali electronicum is the ultimate, and only, medieval beat machine.

Unlock the magic of medieval sounds
The EP–1320 comes with hundreds of medieval sounds and samples, a redesigned set of send effects and punch-in fx, a brand new arpeggiator and a collection of craftily captured multi-sampled instruments. the line input and the internal microphone allow you to sample your own sounds in just seconds. whether you’re into making sultry serenades or bubonic beats, the EP–1320 has you covered.

Become your own bard
Alongside a bucketful of one-shot samples the instrumentalis electronicum features a number of readily playable medieval instruments - play them on the paeds or on an external midi keyboard.

Summon your inner troubadour
In demus mode, choose any of the 9 medieval songs and jam along using the sounds and instruments on the four banks. add some punch-in fx and you’re ready to send any tavern floor into a frenzy! (also perfect for banquets and fetes).

An unrivaled medieval experience; EP-1320 features a hundreds of built-in medieval sounds for your nostalgic pleasure. go back in time and play along with the built-in magical melodies, sultry serenades and bubonic beats. included in the box are 4 knobs, a sticker pack and a quick start guide for you to hit the ground running.

Features:
• built-in mic and speaker
• 6 stereo voices / 12 mono
• 128 MB memory including 96 MB ROM sounds and 32 MB user sample memory
• 9 built-in demo songs
• 9 user projects
• 7 built-in pocus and 12 punch-in pocus
• pressure sensitive keys and multifunctional faedr
• sampling frequency: 46 kHz / 16-bit
• 1x stereo in/out, sync in/out, midi in/out and usb-c
• powered by 4x AAA batteries, or via usb-c.
• dimensions: 240 mm x 176 mm x 16 mm
• weight: 620 g

Go to Item

Teac

TN-280BT

331,55 €* 349,00 € -5%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII CLUB Twin

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

• incl. Brush
• incl. Flight Case

Video: https://youtu.be/WZnFkEwAnCo

supplied in Flight case

Go to Item

Vinyl NRS Box S3

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Vinyl NRS Box S3

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wallmount it 5

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Go to Item

Primary E Phono (Ortofon OM)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Go to Item

Wallmount it 5

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Chateau Vinyl Cotton (75)

328,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: black

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Chateau Vinyl Cotton (75)

328,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: deep blue

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

328,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl solo | heavy nylon orange stealth edition

chateau vinyl solo offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover
a sustainable solution to protect and extend the life of your chateau vinyl bag.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases
_includes protective flight cover

material: waterproof certified heavy cordura® nylon
colour: bright orange

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Ultimate Flight Case Pioneer DDJ-REV5 Plus (Laptop Shelf)

309,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Adjustable laptop shelf
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover
• Removable front access panel

Fits:
• Pioneer DDJ-REV5 controller

Specifications:
• Weight: 15,80 kg / 34.76 lbs
• Outer Dimensions (W x H x D): 84.4 x 51.5 x 24.3 cm | 33.2 x 20.3 x 9.5 inch
• Inner Dimensions (W x H x D): 73.8 x 36.2 x 5.5 cm | 29.1 x 14.3 x 2.2 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Ultimate Flight Case Pioneer DDJ-1000

299,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES
• Fits: 1x Pioneer DDJ-1000
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

Go to Item

Ultimate Producer Backpack Trolley Deluxe

299,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The ultimate companion for producers on the move - the UDG Ultimate Producer Backpack Trolley. This sleek and versatile backpack is designed to meet the demands of modern music producers and DJs, combining style, functionality, and durability in one package.

The Producer Backpack Trolley is more than just a bag; it's a travel companion designed to make your life easier while maintaining a sleek, professional look. Whether you're a DJ, music producer, or someone who needs a reliable, feature-packed backpack for travel, this is the perfect choice. Elevate your gear transportation experience with the ultimate in style and functionality. Get yours today!

FEATURES

Protection:
• Padded MIDI controller compartment
• Inseparable wheel cover
• Comfortable moisture absorbent shoulder straps
• Ergonomic back padding provide exceptional comfort
• Integrated with a TSA combination lock
• Easy backpack to trolley mechanism

Extra's:
• Multiple external pockets for accessories & smaller gear
• Quick access top pocket
• Top & side carry handles
• Retractable handle with 2-stage trolley system
• Smooth rolling in-line wheels with high quality in-line skate bearings

Fits:
• Main compartment fits up to 18.4" laptop.
• Pioneer CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3

Specifications:
• Weight: 4,25 kg / 9.35 lbs
• Outer Dimensions (W x H x D): 39.5 x 62.0 x 32.0 cm | 15.5 x 24.4 x 12.6 inch
• Inner Dimensions (W x H x D): 35.0 x 45.5 x 15.5 cm | 13.8 x 17.9 x 6.1 inch
• Material: Water Resistant Nylon 420D

Go to Item

Ultimate Fold Out DJ Table MK2 Plus (Wheels)

299,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Fold Out DJ Table is the perfect companion piece for the DJ who likes to go completely modular. Use it for a home studio set up or on stage. Constructed from sturdy 9mm thick plywood, the outer sides are laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern. It features built-in center wheels on one side with high quality in-line skate bearings for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading.

UDG Ultimate Fold Out DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down.

FEATURES:
• Increased product dimension over earlier version
• Updated with rounded corner table
• Includes new cable access with cover
• Improve powder coated anodized hardware
• Heavy duty construction of 9 mm vinyl laminated plywood
• Laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern
• Solid aluminum profiles and spring-loaded latches
• Powder coated and anodized hardware
• Sturdy construction
• UDG heavy-duty spring-loaded handles
• Built-in center wheels with high quality in-line skate bearings for convenient transport
• Utility shelf for storage
• Recessed butterfly twist latch lock
• Holds a Maximum Weight of 45 kg/ 100 lbs. Evenly Distributed

DIMENSIONS:
(Width x Height x Depth)

Folded: Folded: 83.5 x 91.0 x 12.0 cm | 32.9 x 35.8 x 4.7 inch
Opened: 136.0 x 91.0 x 48.0 cm | 53.5 x 35.8 x 18.9 inch

Weight: 24,30 kg / 53.46 lbs

Go to Item

Marshall

Stanmore III

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stanmore III has an even wider soundstage than its predecessor, delivering home-filling Marshall signature sound, re-engineered for a more immersive experience. The two-way driver system delivers a heavy but balanced sound, with crisp, soaring treble and controlled bass that really roars. Easily connect to this speaker from your device using Bluetooth, RCA or 3.5 mm and get listening.

STANMORE III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA)
With next-generation Bluetooth 5.2, the RCA input and the 3.5 mm input, connecting to Stanmore III and getting the right sound has never been so effortless. Connect to your speaker directly from your device the way you want to.

PRODUCT DETAILS

POWER AMPLIFIERS:
• ONE 50 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT

TOP PANEL CONTROLS
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 350 X 203 X 188 MM / 13.78 X 8.00 X 7.40 IN

Go to Item

AT-LP120X

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q

Go to Item

AT-LP120X

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Sub 50

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record Doctor

VI Plattenwaschmaschine

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Concorde MkII Elite Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Concorde MkII Elite Cartridge.

Go to Item

Thorens

MM-008

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

SB-2 Stroboscope

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon SB-2 Stroboscope
Ortofon SB-2 stroboscope and matching light source is essential for anyone with a turntable to precisely tune the speed of the turntable's rotation for listening to vinyl and can be used with any turntable where you can adjust the speed, including by way of moving an external motor or with a speed box that allows for fine tuning.

This fine tuning kit comes with a stroboscope record and light source. Simply place the stroboscope record on your turntable, turn on the motor and fine tune the speed whilst shining the light source onto the stroboscope record for an indication of when speed is correct. Includes rings for setting of both for 33 rpm and 45 rpm speeds and a switch for testing speed on either 50 Hz or 60 Hz motors.

As speed is a critical factor in getting the best sound from your vinyl, this is an essential analogue accessory.

Technical data
Dimension - 67 mm (W) x 68 mm (L) x 22 mm (H)
Weight - 130g (with battery)
Disc dimension - 100 mm (dia) x 1.0 mm (t)
Disc material - Stainless steel
Revolutions synchronised - 78 rpm, 45 rpm, 33-1/3rpm
Housing material - Aluminum extrusion
Battery - 2 x 1.5V (UM4)
Accuracy of oscillation circuitry - 1/100 Hz , (0.1%)

Go to Item

RMX-22i

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FEATURES
•2 (+1) Channel Digital Effect Mixer
•Fully digital architecture for outstanding sound and flexibility
•4 Instant Sound Colour Effects per channel (Filter, White Noise, Bit Crush & Gate)
•iPad / tablet / smartphone audio split-input
•EQ-setting for classic or isolator (kill)
•45 mm club line- & crossfader
•Fader-start, reverse & curve control
•Innofader compatible
•Mic channel with 2-band EQ and auto talkover (active ducking technology)
•2 headphones outputs (6,3 mm jack and 3,5 mm jack)
•Balanced (XLR) and unbalanced (RCA) outputs
•Altogether 8 inputs (2x phono, 5x line, 1x combo-mic)
•Altogether 5 outputs (1x XLR, 2x RCA, 2x headphones)
•Club quality sound & built
•Optional Reloop RMX Innofader accessory by Audio Innovate available
•incl. Smartphone / Tablet Audio Split Cable and International Power Supply

TECHNICAL DATA
•Inputs: 2 Phono, 5 Line, 1 Combo-Mic
•Outputs: 1 XLR, 2 RCA, 2 headphones
•Frequency range: 20 Hz - 20 kHz
•EQ range classic: +12 dB / -8 dB
•EQ range isolator: +12 dB / -26 dB (Total Kill)
•Dimensions: 254 x 104 x 355 mm
•Weight: 3,7 kg

Go to Item

Speaker Box 3E Carbon (Paar)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Concorde Music Bronze

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Technics

EAH-AZ80

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Crystal Clear Sound. Now Wireless.

AZ80's large 10mm drivers, special acoustic structure and category-leading noise cancellation give you exceptional Technics sound – wherever your day takes you. With beautifully crafted comfortable design, seamless device switching and crystal-clear call clarity – you won't miss a beat.

Signature Technics Clear Sound
Experience detailed Technics hi-fi sound with powerful bass. An enhanced low-distortion bass response is achieved with large 10mm free-edge aluminium alloy diaphragms.*

Natural Concha Fit
Low-profile design with natural concha fit – to stay comfortable and in-place throughout even your most active days. AZ80 earbuds are carefully shaped to fit the concha groove just above the ear opening – for a comfortable and secure fit.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*No LDAC playback with 3 devices.

Pure Listening with Noise Cancelling
Dual Hybrid Active Noise Cancelling tech using feedforward and feedback mics, plus analogue and digital processing – for uninterrupted category-leading hi-fi sound performance.
*Technics research using JEITA guidelines for true wireless noise cancelling headphones as of March 2023.

Never miss a beat.

Superior Uninterrupted Sound & Smart Features

JustMyVoice™ Technology
8 separate mics plus advanced wind noise reduction, to isolate and amplify speech while minimising background noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 7 hours* playback with ANC on, 24 hours back-up with the case. Quick charge for 15 minutes will give you 70 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Premium Look and Feel
Sleek aluminium trim, with engraved Technics logos, for a reassuringly crafted and tactile experience.

100% Plastic-Free Packaging
New plastic-free packaging. The plant-based bioplastic DURABIO™ is used in the earphones and charging case.

Easy Qi Wireless Charging
Simple fast wireless charging by placing the earphone case on a compatible charger.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Enhanced low-distortion bass response with is achieved with the large 10mm free-edge aluminium alloy diaphragm structure.
• Featuring an acoustic control chamber for natural mid-range with powerful bass. Plus a harmoniser for low-distortion expansive sound.
• Dual Hybrid Noise Cancelling with feedforward & feedback mics, plus analogue & digital processing – a hi-fi experience.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• JustMyVoice™ Technology with 8 mics & advanced wind suppression, to isolate speech from background noise for clearer calls.

Technical Data:
GENERAL
• Driver Unit (mm): 10 mm (3/8 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC):
Earphones:
- Approx. 4.5 hours (NC ON)
- Approx. 5.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 16 hours (NC ON)
- Approx. 17 hours (NC OFF)

• Playback Time with Battery (AAC):
Earphones:
- Approx. 7.0 hours (NC ON)
- Approx. 7.5 hours (NC OFF)
Earphones with Charging case:
- Approx. 24 hours (NC ON)
- Approx. 25 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: Approx. 3.5 hours
- Earphones with Charging case: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: Approx. 3.5 hours

• Quick Charge (15 minutes, AAC):
- Earphones: Approx. 70 minutes (NC ON)
• Standby Time:
Earphones
- Approx. 9 hours (NC ON),
- Approx. 15 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D):
Earphones *with Earpiece M size
- Approx. 22 mm x 27 mm x 24 mm
- Approx. 7/8 inch x 1-1/16 inch x 15/16 inch
Charging case
- Approx. 69 mm x 36 mm x 29 mm
- Approx. 2-11/16 inch x 1-7/16 inch x 1-1/8 inch

• Weight:
- Earphones (one side only: L and R are the same): Approx. 7 g (0.25 oz)
- Charging case: Approx. 50 g (1.8 oz)

• Supplied Accessory:
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS1, XS2, S1, S2, M, L, XL (M attached)

Advanced Function
• Bluetooth® Wireless Technology:
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes

Go to Item

Technics

EAH-A800

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Headphones with Noise Cancelling and Microphone

A Heritage of Excellence. Indulge in Superior Sound.

Backed by Technics’ legendary sound quality, EAH-A800 headphones feature superior audio, exceptional over-the-ear comfort, and sparkling call clarity for home, work, and travel. Unleash a true high-fidelity sound experience in comfortable headphones.

Hear Every Detail
A clear, immersive sound experience with a sense of range and depth. The PEEK/Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.　LDAC™ high resolution wireless audio* for uncompromised sound quality.
*Delivered in 96 kHz/24 bit LDAC when connected by Bluetooth®.

Speak with Clarity
With 8 distinct mics and advanced wind noise reduction, EAH-A800 transmits your voice clearly on each call; 4 Mic Beamforming and Noise Suppression* Technology isolates and amplifies words while minimizing surrounding noise.
*Varying environmental conditions may affect performance.

Immerse Yourself in Sound
With industry-leading* noise cancelling, EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
*As of Oct 31, 2021, According to research by Panasonic Corporation, measured using JEITA-compliant guidelines in the over-ear style noise cancelling headphones market.

Comfort Fit for Your Every Move
Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Control the Sound Around You

Transparent Mode
Transparent mode comprehensively captures voices and other surrounding sounds, leading to a more natural sound similar to not wearing headphones at all. Captures wide range of sound from low to high frequencies.

Attention Mode
Attention mode reduces unwanted external noise to make it easier to hear people‘s voices. It’s perfect when you need to hear airport announcements, etc.

Personalized Your Sound for All-Day Wear

Technics Audio Connect App*
New Technics Audio Connect app* makes pairing easy, helps tailor noise cancelling and sound mode settings to your exact specifications.
*Compatible with smartphones and tablets that are equipped with Android™ 6.0 or higher and that support Google Play, or an iPhone®, iPad® and iPod Touch® equipped with iOS 12 or higher.

Industry-Leading* Long Battery Life
Get up to 50 hours on a single charge with ANC on, with quick charge of 15 minutes for 10 hours of playback; Wearing Sensor for auto shut-off; folds easily to place in compact carrying case.
*As of Oct 31, 2021, According to research by Panasonic Corporation, based on published playback time (AAC, NC ON) in the over-ear style noise cancelling headphones market.

Seamless Device Switching with Multipoint Pairing

Automatic switching of devices
Multipoint pairing allows you to be connected to two Bluetooth® devices at the same time. With the latest firmware update, LDAC connections are also enabled for Multipoint pairing*.
*Requires the latest version of the Technics Audio Connect App.

Simultaneous pairing with PC and smartphone
If you receive a call on your smartphone while watching a video on your PC*, you can start speaking without having to manually switch between your smartphone and PC.
*Depending on the video playback software, the seamless switch may not activate.

Simultaneous pairing with two smartphones or tablets
When a call on your smartphone ends, you do not have to manually switch back to the other device used for music or video playback.

Convenient Functions

Multi-pairing
Multi-pairing is compatible with the latest version of Bluetooth® technology (Ver. 5.2) and can be used with up to 10 devices.

Wearing Playback Sensor
When the headphones are removed from your head, music stops. When they are put back on your head within 60 seconds, music resumes. Comfortable, seamless operation.

Voice Assistants
You can launch smartphone voice function to select music, adjust the volume, and make phone calls, with your voice.

8 High-performance MEMS microphones

Specs:
• A clear, immersive sound experience with a sense of range and depth. The PEEK/ Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.
• With 8 mics and wind noise reduction, EAH-A800 offers superior call quality provided by 4 Mic Beamforming and Noise Suppression Technology to clearly convey your voice to listener.
• EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
• Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Technical Data:
GENERAL
• Driver Unit (mm): 40 mm (1-9/16 in)
• Impedance: 34Ω
• Sensitivity: 105 dB/mW @1kHz
• Frequency Response (Power ON): 4 Hz -40k Hz
• Mic: Monaural, MEMS Mic
• Playback Time with Battery (LDAC):
- Approx. 40 hours (NC ON)
- Approx. 50 hours (NC OFF)
• Playback Time with Battery (AAC):
- Approx. 50 hours (NC ON)
- Approx. 60 hours (NC OFF)
• Charging Time (25°C/ 77°F): Approx. 3.0 hours (Using the power source 1200 mA or higher)
• Quick Charge (15 minutes, AAC): 10 hours (NC ON)
• Standby Time:
- Approx. 60 hours (NC ON),
- Approx. 120 hours (NC OFF)
*Auto power off : OFF
• Dimensions (W x H x D):
- Approx. 170 mm x 196 mm x 85 mm
- Approx. 6-11/16 inch x 7-11/16 inch x 3-3/8 inch
• Weight: Approx. 298 g (10.5 oz)
• Supplied Accessory:
- USB charging cord: Approx. 0.5 m (1.6 ft) (Input Plug : USB Type-A Shape, Output Plug : USB Type-C Shape)
- Detachable cord: Approx. 1 m (3.3 ft)

Advanced Function
• Bluetooth® Wireless Technology:
- Version: 5.2
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
• Dual Hybrid Noise Cancelling: Yes
• Bluetooth® Multipoint Pairing: Yes

Go to Item

Technics

EAH-A800

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Lenco

L-3810GY

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl solo | nylon klein blue stealth edition

chateau vinyl offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: klein blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl solo | nylon olive stealth edition

chateau vinyl offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: olive

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl solo | nylon sand stealth edition

chateau vinyl offers a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl.
advice to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: sand

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Stylus 2M Bronze

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound

The name 2M was selected from several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.
We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze features:

The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.

Technical specifications:

Frequency response - 20-20.000 Hz + 2 / -0 dB
Tracking ability at 315Hz at recommended tracking force *) - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
*) Typical value

Stylus colour - Bronze

Recommended for following cartridges - 2M Bronze, interchangeable with 2M Black

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl solo | nylon black stealth edition

chateau vinyl offers a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl.
advice to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: black

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Teenage Engineering

PO Modular 400

290,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The POM-400 is a build-it-yourself analog synthesizer. featuring 3 oscillators, noise, random generator, 2 envelopes, 2 vca’s, lfo, filter, mixer, speakerbox, power pack and a 1-16 step sequencer.

• powder coated aluminum chassis
• sequencer
• three oscillators
• on-board speaker
• battery power option
• 16 modules
• 15 patch cables

screwdriver and an illustrated build guide also included.

Go to Item

AT-LP3XBT

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Go to Item

Primary E Phono (Ortofon OM)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

Go to Item

Concorde MkII SCRATCH Twin

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

supplied in Flight case

Go to Item

Concorde MkII DIGITAL Twin

OMNIA Impact NUDE Tonabnehmer mit Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

supplied in Flight case

Go to Item

Jico

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OMNIA Impact NUDE Tonabnehmer mit Headshell

Jico

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Chateau Vinyl Solo Cotton (75)

285,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected,
shock absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water resistent 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton

colour: deep blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Chateau Vinyl Solo Cotton (75)

285,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected,
shock absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water resistent 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton

colour: black

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Chateau Vinyl Solo Cotton (75)

285,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected,
shock absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton

colour: bordeaux

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Amp Box S3

284,00 €*

Reloop x Jesse Dean Designs

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Micro audiophile stereo power amplifier

Efficient, audiophile & made in Europe!

The new Amp Box S3 offers one stereo RCA input and delivers powerful and room-filling sound to every loudspeaker. The new PCB concept & sophisticated topology achieves less distortion and a better signal to noise ratio. We designed this amp to match the sound characteristics of a tube amplifier as close as possible. Amp Box S3 brings you a rich and musical sound with an analogue touch of warmth into your living room. It is also the perfect solution for your desktop nearfield monitor speakers due to its size and superior spacious sound stage.

Application examples:
• HiFi Amplifier for 10-15 m2 rooms
• Audiophile desktop nearfield monitor amp
• Streamer power amp upgrade
• Multiroom power amp solution
• Home cinema power amp upgrade
• In-wall or celing speaker amp

The new Amp Box S3 is designed and produced in Europe and is available in a black & silver finish.

Go to Item

Spin x JDD-SPCB PCB Tone Arm (HHV Bundle)

279,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Reloop x Jesse Dean Designs Spin x JDD-SPCB PCB Tone Arm (HHV Bundle)

PLEASE NOTE:THE WARRANTY FOR YOUR RELOOP SPIN PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDD-SPCB.

THE ULTIMATE PORTABLE TURNTABLE.
Reloop SPIN is a portable turntable that guarantees mobile fun anywhere you want! The turntable comes with everything you need out of the box and is especially optimized for scratching and cutting.

BLUETOOTH STREAMING
OF YOUR MUSIC
The Bluetooth Audio Streaming technology allows wireless streaming of music or beats via SPIN – this way the turntable becomes a speaker for your smartphone.

INCLUDING 7'' SCRATCH VINYL
SPIN comes with a 7'' slipmat and an exclusive 7“ scratch vinyl containing specially mastered scratch samples and beats for beginners and experienced scratch artists alike.

FLEXIBLE POWER OPTIONS
Enjoy your records on the road: SPIN is extremely portable, not only due to its shape and small form factor, but also thanks to its flexible power options. It can be used with a regular USB power supply unit (5 V, 2 A), USB power bank or rechargeable batteries*. The batteries can be inserted in the compartment on the bottom and are sold separately. A power LED keeps you informed about the turntable's operational status. The dust cover protects the turntable and thanks to the handle, SPIN can be carried like a suitcase. Skip-proof rubber feet guarantee stability.

*USB power supply, batteries or power bank are not included

OUTSTANDING FOR MOBILE SCRATCHING AND CUTTING
Via the switch on the turntable's top panel you can select between 3 speeds (33 1/3, 45 & 78 rpm) which covers all available speeds. The straight tone arm offers enhanced stability and can be fixed into position with a transportation lock. The pre-installed cartridge has excellent tracking features and holds the groove tightly, even when carrying out fast scratches.

45-MM CROSSFADER
PRE-INSTALLED
The precise 45-mm crossfader has a unique form factor and thanks to the two-rail technology it is especially sturdy. Moreover, it is possible to install the crossfader on either side of the platter – simply select your preferred position.

EXTENSIVE CONTROLS & ADJUSTMENT POSSIBILITIES
On the top panel you can find a start/stop button as well as a pitch control with a range of +/-20 % for precise setting. A tone control can be used to adapt the sound of the lows to your requirements. Volume for the AUX input and master/headphones output can be adjusted via two separate controls. There is also a 7'' adapter for records with a large centre hole.

EXCLUSIVE SUPER SPIN
DUCK LOOPER APP
With any purchased SPIN, DJ Babu and the Beat Junkies Institute of Sound adds a free copy of their Super SPIN Duck Looper app, which can be used ideally as a backing beat while scratching and cutting.

RELOOP SPIN -
CONNECT THROUGH VINYL.
Through the combination of turntable and mixer as well as the high connectivity, SPIN is ideal for vinyl lovers as well as scratch artists and aspiring DJs.

SPIN

Portable turntable for vinyl lovers & scratch artists
Bluetooth streaming, versatile connection possibilities and optional battery operation
Comes with 7'' scratch vinyl, 45-mm crossfader, cartridge and integrated speaker

FEATURES
Portable turntable for vinyl lovers & scratch artists
Mobile fun with your turntable, anywhere you go
Outstanding for mobile scratching and cutting
Out of the box: comes with 7'' scratch vinyl, pre-installed 45-mm-crossfader & cartridge, integrated speaker, Bluetooth audio receiver, USB recording function, slipmat, and dust cover
High-grade 7''-scratch-record: professionally recorded samples for scratching and beats for juggling
Bluetooth audio streaming: wireless streaming of music or beats to the device
Smart USB recording: direct recording of scratches & cuts to USB in MP3 format
Can also be used for digitizing vinyl
Integrated speaker on the turntable's left
3 selectable speeds (33 1/3, 45 & 78 rpm)
Extremely stable tone arm with transport lock
Cartridge with excellent tracking features
Precise 45-mm-crossfader with two-rail glide technology
Crossfader can be installed on preferred side (both-way)
Two headphones connections for listening and monitoring
AUX input facilitates connection of several turntables (daisy chain)
Easy battery charging via USB PSU or USB power bank (sold separately)
Installed start/stop button
Precise speed adjustment via pitch control with +/-20 %
Tone control to adjust low frequencies
Volume control for AUX input and master/headphones
Power LED indicates the turntable's operational status
7'' record puck adaptor with holder
Anti-skip rubber feet for secure stand
Especially sturdy and portable shape factor with optional battery operation
Additional protection thanks to dust cover; can be transported via carrying handle when closed
Locking of dust cover for safe transport
Can be operated with regular USB PSU (5 V, 2 A), USB power bank or batteries (sold separately)
Batteries can be inserted into battery compartment on the device's bottom 2x Li-Ion 18650 (sold separately)
Incl. 7'' scratch vinyl, pre-installed cartridge, slipmat, dust cover, puck adapter, instruction manual and Super Spin Duck Looper app

TECHNICAL DATA
Belt drive
Inputs: AUX 3.5 mm stereo, Bluetooth audio
Outputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereo
Recording format: MP3 with 256 kbit/s
Recording quality: 16 bit / 44.1 kHz
Battery type: 2x Li-Ion 18650 with 1860 mAh each (batteries sold separately)
Power supply: 5 V, 2 A micro USB (PSU sold separately)
Dimensions: 370 x 95 x 260 mm
Weight: 1.61 kg

manual: https://www.reloop.com/media/custom/upload/Reloop-spin_instruction_manual_20190604.pdf

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp includeda
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

Go to Item

Melomania P100

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Over-ear Headphones with Active Noise Cancellation

• Crafted for stunning sound – Class A/B amplification through custom 40mm diaphragm drivers
• 100-hour battery life – five minutes of charge gives up to four hours' playback
• Designed for life – with adaptive hybrid Active Noise Cancelling, seamless multi-device pairing, wear detect and gaming mode.
• Engineered by experts – aptX™ Adaptive Audio, aptX™ Lossless, Clear Voice Capture™ Echo Cancelling, Noise Suppression and Bluetooth 5.3 Multipoint Connection
• Environmentally conscious – User-replaceable battery and earpads, premium reclaimed materials and plastic-free packaging

Feel your music, everywhere
We believe exceptional sound should be a part of everyday life. Our new headphones take the incredible quality of our award-winning audio systems on the go, so you can immerse yourself in the music you love, wherever you are.

Every beat counts
Good music deserves to be played right. We’ve designed and fine-tuned the P100 across a wide range of genres, to deliver phenomenal sound, no matter what you’re listening to.

Superior amplification
Class AB amplification — core to our award-winning CX-series amplifiers — powers our signature sound. A proven technology that’s audibly better than the standard tech found in 99% of headphones.

Discovery is in the detail
Our meticulously crafted 40mm drivers preserve all your music’s energy, immersing you in sound and uncovering nuances in your music in ways you’ve never heard before.

Lossless clarity, adaptive connectivity
aptX Lossless Bluetooth delivers flawless bit-by-bit transmission of your music, maintaining uncompromised sound quality during wireless listening. Snapdragon Sound also streams at an astounding 24bit/96kHz – better than aptX HD.
aptX Adaptive intelligently monitors and maintains connection quality, for uninterrupted performance in challenging locations.

One charge. 100 hours.
Enjoy up to 100 hours of listening on a full single charge (60 hours with active noise cancelling). And if you’re running low, a 5-minute charge provides up to four hours playtime.

Active Noise Cancellation
Turn the bustling noise of the city into a sanctuary of calm. High performance adaptive hybrid noise cancelling combines an array of mics and cutting-edge technology for a truly immersive experience. To hear the environment around you, activate transparency with a single tap.

Premium Comfort, Conscious Design
Viscoelastic memory foam earcups and a soft vegan leather headband offer unparalleled all-day comfort. Lightweight aluminum details ensure maximum durability, so you can enjoy your music as it should be — anytime.

Effortless listening
Easily control your listening experience with simple, intuitive controls, and enjoy seamless compatibility with Siri and Google Assistant.
A smartphone screen displaying an equalizer app for the Melomania P100 headphones, allowing users to tailor the audio experience to their preference.

Customisable sound
We’ve tuned P100 to deliver precise highs and dynamic lows, but we get that you might want to do your own thing. Customise your listening with Melomania Connect. Create your own presets or choose from six expertly curated profiles.

Independent sound, intricate engineering
Made by music and crafted by experts, the P100 pushes the envelope in audio engineering for headphones, combining industry-leading acoustic technologies, fine-tuned for a fantastic listening experience.
Certified for superior sound quality, it guarantees lossless music, low latency, and high-resolution glitch-free audio with lower power consumption. Echo-cancelling and noise-suppression means calls are uninterrupted and crystal clear, so it’s great for both dedicated listening and daily life.

Crystal clear phone calls
Multiple beamforming microphones and Qualcomm’s latest Clear Voice Calling cVc 8.0 technology suppress background noise and deliver outstanding voice clarity.

Make the most of your music
Connect to two devices simultaneously and seamlessly switch between your playlist, a movie on your laptop, or calls on your phone—without the need to reconnect. Connect with the provided cable too, at 24bit/96kHz.

For music and for the planet
Promoting circularity and minimising waste, 100% of our rare earth neodymium and 50% of the plastic used are recycled. All of our packaging is eco-friendly and plastic-free. Both the battery and earpad cushions are user-replaceable with standard tools, ensuring long-term use.

What's in the box:
• Melomania P100
• Carry Case
• Quick Start Guide
• USB-C to 3.5mm Jack
• USB-C to USB-C

Technical specifications:
• AMPLIFICATION: Class A/B amplification
• DRIVER: 40mm three-layer composite (PEEK+PU+PEEK)
• BATTERY PLAY TIME: Up to 100 hrs (dependent on volume, settings and other factors)
• BATTERY PLAY TIME (ANC ON): Up to 60 hrs
• CHARGING TIME: <160 minutes
• FAST CHARGE: 5 minutes gives 4 hours playback (ANC Off)
• POWER SUPPLY: USB-C
• WIRED MODE: USB-C or 3.5mm Jack
• NOISE ISOLATION: Hybrid ANC
• TRANSPARENCY MODE: Yes
• WEAR DETECT: Yes
• WIND NOISE REDUCTION: Yes
• GOOGLE FAST PAIR: Yes
• VOICE ASSISTANT ACTIVATION: Yes
• MICROPHONES: 6 Mics total
• VOICE PROCESSING: 2-Mic Qualcomm® cVc™ Echo Cancelling and Noise Suppression Technology
• LOW LATENCY: <80ms - Gaming Mode accessible via Melomania Connect
• MELOMANIA CONNECT APP: Yes
• FIRMWARE UPGRADABLE: Yes - via Melomania Connect
• BLUETOOTH VERSION: 5.3
• SUPPORTED PROFILES: A2DP, AVRCP, HSP, HFP
• SUPPORTED CODECS: aptX™ Lossless, aptX™ Adaptive, AAC, SBC
• TRIPLE-CORE PROCESSOR ARCHITECTURE: Qualcomm QCC3084, Powerful tri-core processor architecture, Dual-core application subsystem 32/80 MHz operation, Single core 240 Mhz configurable Qualcomm® 32‑bit Kalimba audio digital signal processor (DSP) core, flexible clocking from 2 MHz to 240 MHz to enable optimization of performance vs.power consumption, Analog Devices ADAU1787 dedicated low power codec with FastDSP for ANC processing
• OPERATING TEMPERATURE: 0°C to +40°C
• OPERATING RELATIVE HUMIDITY: 10 to 80%, Non-condensing
• DIMENSIONS (HEADPHONE): 250 x 204 x 59mm
• WEIGHT (HEADPHONE): 330g
• COLOUR/FINISH (HEADPHONE): Black or White

Go to Item

warp x airbag craftworks

19.4 Recordbag

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

warp x airbag craftworks | 19.4

the 19.4 model is a wider version of warp x airbag craftworks 14.7 with additional capacity for up to 17" laptops.
ideally suited to djs or as an overnight bag perfect for travelling and everyday use.

_water-repellent ykk zippers with 2 sliders
_matt black coated metal carabiners & d-rings
_debossed leather warp logo patch with detailing in warp purple
_leather zipper tags in warp purple
_adjustable shoulder strap with leather shoulder pad
_shoulder pad leather debossed with a2 logo
& warp x airbag craftworks detail
_doubleface heavy duty leather handles with push button
_soft-cushioned back with pocket function
_leather feet/stands with circle debossing
_inside laptop holder space for up to 17" laptops

material: certified cordura® nylon
colour: black

made in germany

42 x 33 x 14 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Goldring

G1006 Cartridge

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Reduced Moving Mass
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.

Expert Adjustment
The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Specifications:
• Frequency Response: 20 Hz -20 kHz ±3 dB
• Channel Balance: within 2 dB @ 1 kHz
• Channel Separation: better than 25 dB @ 1 kHz
• Sensitivity: 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec
• Static Compliance: 24 mm/N (lat); 16 mm/N (vert)
• Equivalent tip mass: 0.45 mg
• Vertical Tracking Angle: 24°
• Stylus Radius: Elliptical
• Stylus Type: Replaceable
• Load Resistance: 47 kΩ
• Load Capacitance: 150-200 pF
• Internal Inductance: 570 mH
• Internal Resistance: 660 Ω
• Cartridge Mass: 6.3 g
• Cartridge Mass (inc. fixings): 7.6 g
• Fixing Centre: 0.5" (12.7 mm)
• Playing Weight: 1.5 - 2.0 g (1.7 g nom.)
• Replacement Stylus: 1006 - D0

Go to Item

ATH-TWX9

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Earbuds

The ATH-TWX9 truly wireless earbuds offer the freedom to customize your sound space for an advanced audio experience. These headphones create an immersive audio experience and feature digital hybrid noise canceling technology. With unique features including deep-UV sterilization, 360 Reality Audio for a realistic 3D sound stage, and Snapdragon Sound™ platform for higher quality music, video, and calls, the ATH-TWX9 set themselves above the rest as the best truly wireless headphones.

Designed to connect people through sound, these hybrid headphones are equipped with advanced features making the ATH-TWX9 optimal workout headphones or commuter headphones. The splashproof headphone design (IPX4®-equivalent) makes these perfect for rain, water, and sweat. Choose from five preset noise-cancelling modes or optimize noise cancellation for your current environment simply by pressing the touch sensor on the left earbud. These non-slip, compact and ergonomic headphones are designed to ensure a secure, comfortable fit. Customize your experience with twelve different fitting eartip designs (4 diameter sizes, 3 stem lengths) for the most comfortable noise cancelling headphones.

With approximately 6 hours of continuous playback with up to 18.5 hours of extended use, these in-ear Bluetooth headphones are newly designed with 5.8 mm high-resolution drivers to deliver an extended high-frequency range and improved sound detail. Experience crystal clear call quality thanks to the Qualcomm® cVc™ Generation 8.0 technology. Minimize sound delay while playing games or watching videos with Low Latency mode. Compatible with Google Fast Pair , Sony’s 360 Reality Audio, multipoint pairing, and the A-T connect app, these headphones provide a customizable and seamless experience across devices.

Included Accessories: 30 cm (1.0’) USB-A/USB-C charging cable

Your Sound Space - A Premium Listening Experience
Combining innovative acoustic technology with a snug, comfortable fit and convenient controls, the ATH-TWX9 lets you create an intimate sound space that’s all your own.

Ambience Control - Customize Your Noise Cancellation
With five preset noise-cancelling modes to choose from, plus options for adapting noise cancellation to your current environment or for hearing the people around you, the ATH-TWX9 puts you in control of ambient noise.

Advanced Audio - Designed for Premium Sound
Newly designed 5.8 mm high-resolution drivers deliver an extended high-frequency range and improved sound detail – perfect for use with the advanced Qualcomm® Snapdragon Sound™, Qualcomm® aptX™ Adaptive audio, and Sony 360 Reality Audio technologies.

Features:
• Truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling and hear-through) can be employed for music playback and calls
• Use the touch sensor to choose from five preset noise-cancelling modes or optimized noise cancelling that adapts to your current environment
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Newly designed 5.8 mm high-resolution drivers deliver an extended high-frequency range and improved sound detail
• Compatible with Qualcomm® Snapdragon Sound™, Qualcomm® aptX™ Adaptive audio, and Sony’s 360 Reality Audio to deliver an advanced listening experience
• Eartips feature a hybrid structure of hard and soft silicone for best fit and sound performance, and come in three different lengths for each size (XS/S/M/L)
• Dual high-performance MEMS (micro-electromechanical system) mics, beamforming technology, and Qualcomm® cVc™ Generation 8.0 technology ensure crystal-clear call quality
• Sidetone circuitry improves conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Qualcomm® TrueWireless Mirroring enables independent transmission to the left and right earbuds, reducing sound interruptions and delays for videos
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6 hours of continuous playback with up to 18.5 hours of extended use
• Charging case’s deep-UV LED sterilization system (with unique mirror processing) eliminates bacteria and viruses from the surface of the headphones**
• A-T Connect app gives you additional control: activate low latency mode, personalize noise-cancelling system, adjust and save EQ to the headphones, change L/R volume balance, select desired voice assistant (such as Amazon Alexa Built-in or Google Assistant), change codecs, and more
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable

* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.
** The system is more than 99% effective against E. coli and bacteriophage viruses, and more than 90% effective against Staphylococcus aureus, but it is not effective against all bacteria and viruses. The effectiveness against the novel coronavirus has not been verified.

Specifications Headphones:
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 10 to 40,000 Hz
• Sensitivity 102 dB/mW
• Impedance 16 ohms
• Weight Headphone: Approx. 5.4 g (0.19 oz) (L side), approx. 5.4 g (0.19 oz) (R side); Charging case: Approx. 55.9 g (2.0 oz)
• Charging Time Headphones: Approx. 2.5 hours *3
• Charging case: Approx. 3.5 hours (USB charging) *3; Approx. 5.0 hours (wireless charging) *3
• Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.0 hours *3 (headphones), Max. approx. 18.5 hours *3 (if charging case is used in combination)
• Microphone Type MEMS type
• Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response 100 to 16,000 Hz
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones: DC 3.85 V lithium ion battery
• Charging case: DC 3.85 V lithium polymer battery
• Water-Resistant (drip-proof) Performance IPX4*4
• Accessories Included • USB charging cable (30 cm (12"), USB Type-A / USB Type-C) • Eartips: Short (XS, S, M, L), Standard (XS, S, M, L), Long (XS, S, M, L)

Notes
*1 When using Qualcomm® Snapdragon Sound.
*2 When using Qualcomm® Snapdragon Sound and Qualcomm® aptX™ Adaptive audio.
*3 The figures above depend on operating conditions.
*4 Headphones only.

Specifications Bluetooth®:
• Bluetooth® Version Bluetooth version 5.2
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1 kHz, 48 kHz, 96 kHz *1
• Supported Bit Rates 16 bit, 24 bit *2
• Transmission Band 10 Hz to 47,000 Hz; (when Qualcomm® Snapdragon Sound 96kHz sampling) 20 Hz to 20,000 Hz

Go to Item

Align it - Einstelllehre für Tonabnehmer