DJ Equipment 1818 Items

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

DJ-03 HD - CARTRIDGE INCL. HEADSHELL

This is the Nagaoka DJ cartridge. With a high output voltage of 6 mV and a recommended tracking force of 3 - 5 g, it is one of the more stable of its kind.

TECHNICAL SPECIFICATIONS:
• Cartridge type: MM
• Configuration: Climax DS/DSM
• Output voltage: 6 mV (5 cm/sec.)
• Frequency Characteristics: 20Hz~20KHz
• Channel separation: 20 dB (1 kHz)
• Channel balance: 2 dB or less
• Load resistance: 47 kΩ
• Load: 100pF
• Cantilever: aluminum alloy
• Needle Tip: 0.6 mil tapered bonded diamond
• Recommended tracking force: 3~5g
• Pickup weight: 5.1g
• Weight with headshell: 15.1g

minimalistic, cubistic everyday bag.
designed by the a2 department in cooperation with playhouse records.
made from water-repellent cotton with finest italian leather details.
holds all necessities for a modern but craftmenship conscious everyday life.

_small outside pouch on the backside
_2 inside pouches, one with small ykk zipper
_adjustable shoulder strap with embossed leather cushioning &
stiffened bottom
_space for up to 50x 12" vinyls
_bag body and top not cushioned, just lined

material: water-repellent cotton & premium leather

colour: deep blue

made in germany

33 x 33 x 15 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offers a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned, removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: water-repellent cotton
colour: black

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offeres a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned , removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: waterproof durable cotton canvas
colour: deep blue

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

supplied in Flight case

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

The UDG Digi BackPack was specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style. A cleverly designed side entry compartment for a laptop up to 15.4 inch allows access without having to rummage through the main body of the bag. The spacious main compartment can hold an extra laptop or used for magazines/paperwork whilst in transit.
The front compartment features a detachable interface pouch and accessories organizer pocket. There are also 5 additional exterior pockets that provide storage for personal items, one of these has an ear bud access point with a hinged storage pocket so that you can listen to your mp3 player whilst on the go.

UDG Digi BackPack - specifications:

• water resistant nylon 450D shell
• easy access size entry padded compartment for 15.4 inch laptop with vertical file organization
• main compartment for laptop, LPs, books or magazine
• front compartment with organization panel and detachable pouch for audio interface
• 5 exterior pockets for personal essentials, including one with ear bud pass-through for mp3 players and unique hinged headphone pocket
• S-curved shoulder straps for ultimate comfort
• outer dimensions: approx. 33.5 x 48 x 27 cm (13.2 x 18.9 x 10.6 inch)
• inner dimensions: approx. 30 x 42 x 13 cm (11.8 x 16.5 x 5.1 inch)
• weight: 1.8 kg (4 lbs)

Providing unbeatable accuracy! The Stroboscope Testrecord together with the Speed Light V2 give the best results in adjusting your turntable speed.

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord%20+%20Speedlight_E+D.pdf

Acrylic dust cover for Concept Signature.
Dimensions (W/D/H in mm): 450 x 380 x 147 (Outer dimension)

taunus 1.5 | com-fi pro | premium nylon night sky

largest and most comfortable version of
our puristic and lightweight backpack
for vinyllovers, travellers and minimalists.

_additional spacious pocket on the inner backside
_smaller inside zip pocket
_holds 16inch+ laptops or up to 40 x 12" records
_cushioned back
_extra double-layered breathable mesh cushioned back
_double-layered breathable cushioned shoulder straps
_4x unique adjustable buttons closure made from recycled
genuine leather
_hidden pocket-dock velcro patch for additional pouch options
_40mm wide straps with cushioning: 55mm

material: italian premium nylon with water-repellent coating
colour: black

h:46-49 x w:42 x d:11 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Blue features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, an environment-friendly material which ensures high rigidity while eliminating unwanted resonances

2M Blue adds more dynamics and resolution, sounds more open and reproduces more details than 2M Red

Output voltage at 1000 Hz, 5cm/sec. - 5,5 mV
Channel balance at 1 kHz - 1,5 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at - 3dB - 20-25.000 Hz
Frequency response - 20-20.000 Hz + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1,6-2,0g (16-20 mN)
Tracking force, recommended - 1,8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1,3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Blue
Cartridge weight - 7,2 g
Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

The ATH-TWX7 truly wireless earbuds are designed to provide listeners with a high-fidelity experience and features to customise listening sessions. Leveraging the 5.8 mm high-resolution drivers from the flagship ATH-TWX9, the ATH-TWX7 offer detailed music playback, including support for 24-bit/96 kHz audio files all within a compact and easily portable design. These earbuds also provide audio-controlling features accessible with a touch of the earbud sensor to activate the digital hybrid noise canceling technology.

The ATH-TWX7 wireless earbuds use digital hybrid noise cancelling technology to eliminate unwanted noise and provide a crystal-clear sound performance. Whether users are immersing themselves in music or staying connected to their surroundings, the easily accessible hear-through and talk-through functions allows for quick adjusting to prioritise conversations or hear external announcements.

The built-in MEMS microphones, combined with beamforming technology, guarantee the speaker’s voice is heard loud and clear, even in noisy environments. Users can choose between two call modes – Natural Mode for quieter settings or Noise-Reduction Mode for bustling environments. The mute button allows for the ability to silence the microphone during calls, and the A-T Connect app provides the ability to evaluate voice tone and clarity.

Prioritising comfort, the ATH-TWX7 earbuds are designed to discreetly and snugly fit ears of all sizes. The package includes two sets of eartips in XS/S/M/L, offering the choice between comfortable, soft earbud tips for extended listening sessions or secure-fitting standard earbud tips for enhanced fit.

The built-in Soundscape feature offers audio designed for stress relief, such as tranquil nature sounds and additional choices such as ambient music for enhanced focus and soothing sounds to aid in relaxation and meditation.

With approximately 6.5 hours of playback and up to 20 hours with the non-slip portable charging case, users can take the ATH-TWX7 on the go with confidence. Also designed with IPX4 water-resistant protection, these headphones are equipped to brave rain, water, and sweat.

Included Accessories:
• 30 cm (1.0') USB-A/USB-C charging cable
• Soft earbud tips: XS, S, M, L
• Standard earbud tips: XS, S, M, L

With two beamforming microphones in each earbud, the ATH-TWX7 clearly captures your voice, even in noisy environments. Plus, you can choose from two call modes – Natural Mode (indoors/quiet) and Noise-Reduction Mode (outdoors/noisy) – to get the best audio quality anywhere.

The ATH-TWX7 lets you control your sound space. Apply the noise-cancelling function to focus on work, the talk-through function to accentuate the voices/announcements around you, or the unique soundscape function to produce sounds for concentrating, relaxing or meditating.

The compact earbuds fit discreetly in your ears, providing a comfortable listening experience for hours on end. Select from two sets of included eartips – soft and standard – to customise your fit.

Digital hybrid noise-cancelling technology, driven by small MEMS microphones in each earbud, eliminates unwanted sounds. The hear-through function allows you to listen to music while walking, playing sports, doing housework, working remotely, or using public transportation.

Using the ATH-TWX7 with the Audio-Technica CONNECT app gives you access to many additional functions, such as the low latency mode, Natural and Noise-Reduction call modes, ambience control (including presets and hear-through), EQ, touch sensor settings, soundscape function (for relaxing or focusing), and more!

Features:
• Compact, truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling, hear-through, talk-through) can be employed for music playback and calls
• MEMS (micro-electromechanical system) mics, a high-accuracy noise-cancelling processor, and a proprietary filter work together to deliver stellar noise-cancelling performance
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Talk-through function lets you hear voices/announcements around you by instantly lowering playback volume and capturing ambient sounds while enhancing the vocal bandwidth
• 5.8 mm high-resolution drivers, adopted from the ATH-TWX9, deliver an extended high-frequency range and improved sound detail
• LDAC codec compatibility enables playback of 24-bit/96 kHz audio files
• Includes two sets of eartips (XS/S/M/L): Soft eartips for greater comfort during long listening sessions and standard eartips for a snugger, more secure fit
• High-performance MEMS mics, beamforming technology, and two selectable call modes (Natural and Noise-Reduction) ensure crystal-clear call quality
• Call test function allows you to check the tone and clarity of your voice
• The microphone can be easily muted during calls via built-in controls on the earbuds
• Soundscape function plays relaxing sounds of nature, a masking noise to help you concentrate, or sounds for meditation
• Private Timer function provides advanced personal time management
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6.5 hours of continuous playback and up to 13.5 hours of extended use with the charger (for 20 hours total, when noise-cancellation is in constant use)
• A-T Connect app gives you additional control: activate low latency mode, select Natural and Noise-Reduction call modes, adjust and save EQ to the headphones, change codecs, and more
• Compact charging case with non-slip finish is easy to handle and carry with you wherever you go
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable
* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8mm
• Frequency Response 10 - 40,000Hz
• Sensitivity 100dB/mW
• Impedance 16 ohms
• Weight Headphones: Approx. 4.7 g (0.17 oz) (L side), approx. 4.7 g (0.17 oz) (R side); / Charging case: Approx. 47.5 g (1.7 oz)
• Charging Time Headphones：Approx. 1.5 hours* / Charging case：Approx. 3 hours (USB charging), Approx. 5 hours (wireless charging). Depending on operating conditions.
• Operating Temperature 5℃ - 40℃ (41℉ to 104℉)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.5 hours with ANC on and 7.5 hours with ANC off (Headphones), / Max. approx. 20.0 hours with ANC on and 24.0 hours with ANC off (if charging case is used in combination) Depending on operating conditions.
• Microphone Type MEMS type
• Microphone Sensitivity -38dB（1V/Pa, at 1kHz）
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones：DC3.85V lithium ion battery (built-in) / Charging case：DC3.85V lithium ion battery (built-in)
• Water-Resistant (drip-proof) Performance IPX4 (headphones only)
• Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips: Soft (XS, S, M, L), Standard (XS, S, M, L)
Notes *Charging takes longer when the temperature is below 10℃ (50℉) or above 30℃ (86℉). For product improvement, the product is subject to modification without notice.

Bluetooth®
• Bluetooth® Version Bluetooth Ver.5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12mW EIRP
• Frequency Band 2.4GHz band（2.402GHz～2.480GHz）
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec LDAC, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1kHz, 48kHz, 96kHz (When using LDAC codec)
• Supported Bit Rates 16bit, 24bit (When using LDAC codec)
• Transmission Band 10Hz - 47,000Hz (when LDAC 96kHz sampling), 20Hz - 20,000Hz

The ATH-TWX7 truly wireless earbuds are designed to provide listeners with a high-fidelity experience and features to customise listening sessions. Leveraging the 5.8 mm high-resolution drivers from the flagship ATH-TWX9, the ATH-TWX7 offer detailed music playback, including support for 24-bit/96 kHz audio files all within a compact and easily portable design. These earbuds also provide audio-controlling features accessible with a touch of the earbud sensor to activate the digital hybrid noise canceling technology.

The ATH-TWX7 wireless earbuds use digital hybrid noise cancelling technology to eliminate unwanted noise and provide a crystal-clear sound performance. Whether users are immersing themselves in music or staying connected to their surroundings, the easily accessible hear-through and talk-through functions allows for quick adjusting to prioritise conversations or hear external announcements.

The built-in MEMS microphones, combined with beamforming technology, guarantee the speaker’s voice is heard loud and clear, even in noisy environments. Users can choose between two call modes – Natural Mode for quieter settings or Noise-Reduction Mode for bustling environments. The mute button allows for the ability to silence the microphone during calls, and the A-T Connect app provides the ability to evaluate voice tone and clarity.

Prioritising comfort, the ATH-TWX7 earbuds are designed to discreetly and snugly fit ears of all sizes. The package includes two sets of eartips in XS/S/M/L, offering the choice between comfortable, soft earbud tips for extended listening sessions or secure-fitting standard earbud tips for enhanced fit.

The built-in Soundscape feature offers audio designed for stress relief, such as tranquil nature sounds and additional choices such as ambient music for enhanced focus and soothing sounds to aid in relaxation and meditation.

With approximately 6.5 hours of playback and up to 20 hours with the non-slip portable charging case, users can take the ATH-TWX7 on the go with confidence. Also designed with IPX4 water-resistant protection, these headphones are equipped to brave rain, water, and sweat.

Included Accessories:
• 30 cm (1.0') USB-A/USB-C charging cable
• Soft earbud tips: XS, S, M, L
• Standard earbud tips: XS, S, M, L

With two beamforming microphones in each earbud, the ATH-TWX7 clearly captures your voice, even in noisy environments. Plus, you can choose from two call modes – Natural Mode (indoors/quiet) and Noise-Reduction Mode (outdoors/noisy) – to get the best audio quality anywhere.

The ATH-TWX7 lets you control your sound space. Apply the noise-cancelling function to focus on work, the talk-through function to accentuate the voices/announcements around you, or the unique soundscape function to produce sounds for concentrating, relaxing or meditating.

The compact earbuds fit discreetly in your ears, providing a comfortable listening experience for hours on end. Select from two sets of included eartips – soft and standard – to customise your fit.

Digital hybrid noise-cancelling technology, driven by small MEMS microphones in each earbud, eliminates unwanted sounds. The hear-through function allows you to listen to music while walking, playing sports, doing housework, working remotely, or using public transportation.

Using the ATH-TWX7 with the Audio-Technica CONNECT app gives you access to many additional functions, such as the low latency mode, Natural and Noise-Reduction call modes, ambience control (including presets and hear-through), EQ, touch sensor settings, soundscape function (for relaxing or focusing), and more!

Features:
• Compact, truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling, hear-through, talk-through) can be employed for music playback and calls
• MEMS (micro-electromechanical system) mics, a high-accuracy noise-cancelling processor, and a proprietary filter work together to deliver stellar noise-cancelling performance
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Talk-through function lets you hear voices/announcements around you by instantly lowering playback volume and capturing ambient sounds while enhancing the vocal bandwidth
• 5.8 mm high-resolution drivers, adopted from the ATH-TWX9, deliver an extended high-frequency range and improved sound detail
• LDAC codec compatibility enables playback of 24-bit/96 kHz audio files
• Includes two sets of eartips (XS/S/M/L): Soft eartips for greater comfort during long listening sessions and standard eartips for a snugger, more secure fit
• High-performance MEMS mics, beamforming technology, and two selectable call modes (Natural and Noise-Reduction) ensure crystal-clear call quality
• Call test function allows you to check the tone and clarity of your voice
• The microphone can be easily muted during calls via built-in controls on the earbuds
• Soundscape function plays relaxing sounds of nature, a masking noise to help you concentrate, or sounds for meditation
• Private Timer function provides advanced personal time management
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6.5 hours of continuous playback and up to 13.5 hours of extended use with the charger (for 20 hours total, when noise-cancellation is in constant use)
• A-T Connect app gives you additional control: activate low latency mode, select Natural and Noise-Reduction call modes, adjust and save EQ to the headphones, change codecs, and more
• Compact charging case with non-slip finish is easy to handle and carry with you wherever you go
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable
* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8mm
• Frequency Response 10 - 40,000Hz
• Sensitivity 100dB/mW
• Impedance 16 ohms
• Weight Headphones: Approx. 4.7 g (0.17 oz) (L side), approx. 4.7 g (0.17 oz) (R side); / Charging case: Approx. 47.5 g (1.7 oz)
• Charging Time Headphones：Approx. 1.5 hours* / Charging case：Approx. 3 hours (USB charging), Approx. 5 hours (wireless charging). Depending on operating conditions.
• Operating Temperature 5℃ - 40℃ (41℉ to 104℉)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.5 hours with ANC on and 7.5 hours with ANC off (Headphones), / Max. approx. 20.0 hours with ANC on and 24.0 hours with ANC off (if charging case is used in combination) Depending on operating conditions.
• Microphone Type MEMS type
• Microphone Sensitivity -38dB（1V/Pa, at 1kHz）
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones：DC3.85V lithium ion battery (built-in) / Charging case：DC3.85V lithium ion battery (built-in)
• Water-Resistant (drip-proof) Performance IPX4 (headphones only)
• Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips: Soft (XS, S, M, L), Standard (XS, S, M, L)
Notes *Charging takes longer when the temperature is below 10℃ (50℉) or above 30℃ (86℉). For product improvement, the product is subject to modification without notice.

Bluetooth®
• Bluetooth® Version Bluetooth Ver.5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12mW EIRP
• Frequency Band 2.4GHz band（2.402GHz～2.480GHz）
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec LDAC, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1kHz, 48kHz, 96kHz (When using LDAC codec)
• Supported Bit Rates 16bit, 24bit (When using LDAC codec)
• Transmission Band 10Hz - 47,000Hz (when LDAC 96kHz sampling), 20Hz - 20,000Hz

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Next level authenticity with the 2M Blue
The goal for any cartridge should be to reproduce the sound as close to the artists vision as possible, and the 2M blue takes you further on this journey of authenticity. With the 2M Blue, you get serious about listening to vinyl.

Features:
The 2M Blue features a Nude Elliptical diamond and split pole pins with a copper wire.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details compared to the 2M Red model.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 25 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Blue
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Stylus for Goldring E4 MM Cartridge

Just needle, not the complete cartridge included!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Professional over-ear DJ headphones

Designed to adapt
We’ve listened to feedback from DJs and improved on our previous professional DJ headphones. With newly developed drivers, the HDJ-X7 model gives you clean monitoring even at high volumes. The independent ground wire in the 4-core twisted-structure cable ensures superior left and right channel separation, while the flexible headband means your headphones will be a perfect fit.

The HDJ-X model headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
Thanks to the newly developed 50-mm driver, sound is always crystal clear. Add to that the tight bass notes from the optimised diaphragm, a cable with superior left and right channel separation and the bass reflex chamber, all enabling professional monitoring.

Rigorously tested
Even on the road, your headphones will handle severe conditions and heavy use. Durable metal is used in the moving parts, enabling a strong construction that cleared even the US Military Standard Shock test*.
* MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Various accessories included
The HDJ-X7 comes with a detachable 1.2 m coiled cable and a 1.6 m straight cable, plus an L-type mini-jack to prevent accidental disconnection.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 50 mm dome type
• Cord: 1.2 m coiled cable (3 m extended length) & 1.6 m straight cable

Accessories:
• HDJ-X7
• 1.2 m coiled cable (3 m extended length)
• 1.6 m straight cable
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 36 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 3500 mW
• Weight (without cord): 312 g
• Frequency Range: 5 - 30000 Hz

Professional over-ear DJ headphones

Designed to adapt
We’ve listened to feedback from DJs and improved on our previous professional DJ headphones. With newly developed drivers, the HDJ-X7 model gives you clean monitoring even at high volumes. The independent ground wire in the 4-core twisted-structure cable ensures superior left and right channel separation, while the flexible headband means your headphones will be a perfect fit.

The HDJ-X model headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
Thanks to the newly developed 50-mm driver, sound is always crystal clear. Add to that the tight bass notes from the optimised diaphragm, a cable with superior left and right channel separation and the bass reflex chamber, all enabling professional monitoring.

Rigorously tested
Even on the road, your headphones will handle severe conditions and heavy use. Durable metal is used in the moving parts, enabling a strong construction that cleared even the US Military Standard Shock test*.
* MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Various accessories included
The HDJ-X7 comes with a detachable 1.2 m coiled cable and a 1.6 m straight cable, plus an L-type mini-jack to prevent accidental disconnection.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 50 mm dome type
• Cord: 1.2 m coiled cable (3 m extended length) & 1.6 m straight cable

Accessories:
• HDJ-X7
• 1.2 m coiled cable (3 m extended length)
• 1.6 m straight cable
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 36 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 3500 mW
• Weight (without cord): 312 g
• Frequency Range: 5 - 30000 Hz

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm
Made in Germany

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation "Unter einem Dach".

Thanks to its easy bike-locking system, the Oonops Drops X Maesh bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The Oonops Drops X Maesh Commuter 45-Bag is waterproof and upholstered to protect your little treasures.

Furthermore, it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ sets. The bag grabs about 65 to 115 singles, depending on the sleeves you use and in which direction the records are stacked. An inner bag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant and refugee background and supports them with inhouse language courses and much more. So if you support the Oonops Drops X Maesh bag you'll support their organisation to grow and to do more great projects they initiate.

Each Oonops Drops X Maesh Bag is a unique upcycled item, the charcoal may vary in nuances.

Oonops Drops X Maesh Commuter 45-Bag - specs:

• weight: 1 kg
• dimensions: length: 28 cm; width: 20 cm (incl. bike-locking system: 24 cm); height: 23 cm
• shoulder Strap: 133cm
• made in Germany

The RIOT DJ-BACKPACK XL is a high-end, extremely rugged-built backpack designed for the heavy-travelling Pro-DJ. It comfortably holds any digital gear from Kontrol S4 to battle-mixers such as Rane Sixty-Two or Pioneer DJM-S9 along with a laptop and accessories. Constructed entirely from hardwearing PVC Tarpaulin, its outer shell and all zippers are fully waterproof which ensures your gear is protected even in the worst weather. The featured “Zip-Around-Expansion-System” means the main compartment’s capacity can be doubled, turning the RIOT DJ-Backpack into the ultimate versatile packing monster.

FITS

Laptop up to 17"
Ableton Push2
Akai MPK-25
Akai MPC Renaissance
Denon MC-4000
NI Kontrol S5
NI Kontrol S4 MK2
NI Kontrol S2 MK2
NI Kontrol S2 MK3
NI Kontrol D2
NI Kontrol Z2
NI Maschine
Numark Mixtrack Pro 2
Pioneer DDJ-SB2
Pioneer DDJ-SB3
Pioneer DDJ-400
Pioneer DDJ-RB
Pioneer DJM-S9
Pioneer DJM-900 SRT/NXT
Rane Seventy-Two
Rane Sixty-Two
Rane Sixty-Eigth
Reloop Elite
Roland DJ-202
Vestax VCI-400
Vestax VCI-380
12“ Vinyl
Accessories

BASICS

Crafted from hardwearing and 100% waterproof PVC Tarpaulin
Soft-fleece lining
PVC-coated (waterproof zippers)
Lockable zippers on main and laptop compartment
Rubber corner protectors and rubber feet
Main compartment includes several removable adjustment foams, a divider and a protection panel
The “Zip-Around-Expansion-System” doubles the main compartment’s capacity
Main compartment can be packed and unloaded in the “DJ-booth-friendly” stand-up position or in the fully opened and unfolded position to gain easy access
Separate and fully padded laptop-compartment up to 17”
Two large front pockets with internal mesh pouches provide perfect organization of small accessories
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Top and side carrying handles
Detachable trolley sling
Hand luggage compatible

SPECS

+ Outer dimensions: 56 x 37 x 23 cm

+ Inner dimensions: 51 x 32 x 8 cm

+ Weight: 3,0 kg



+ Color: black/red (Item-No.: 47880 / EAN-Code: 4041212478801)

Der AT-VM95SH besitzt eine nackte
Shibata-Nadel – hochgeschätzt
insbesondere für audiophile HighendAnwendungen.
Der Shibata-Schliff ermöglicht satte,
volle Bässe und Mitten und einen
Frequenzgang bis 25.000 Hz.

AT-VM95SH
VM95 SERIES SHIBATA STEREO CARTRIDGE
The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

SHIBATA STYLUS
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95SH
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.7 x 0.26mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95SH
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

The UDG Sling Bag Trolley Deluxe is equipped with the following features:

• stows approx. 60 12" vinyl records
• 2 CD folders (each one stows up to 24 CDs)
• rugged nylon upper
• front and side pockets with zip closure
• sturdy top handle
• adjustable, padded shoulder strap
• UDG security combination lock

• Weight 4,50 kg / 9.9 lbs
• Outer Dimensions cm: 40 x 45.5 x 31 | inch: 15.7 x 17.9 x 12.2
• Inner Dimensions cm: 31.5 x 32 x 20 | inch: 12.4 x 12.6 x 7.9
• Material Water Resistant Nylon 420D
• Protection Foam padded main compartment
• Extra's Retractable handle with 3 stage internal trolley system.
• Large front pocket + 2 side pocket for Accessories and smaller gears.
• Smooth rolling in-line wheels.
• Integrated combination lock.
• UDG Headphone Bag can buckled up.
• Fits 60 LP's or 1 CD Wallet 128 + 1 CD Wallet 280 or 1 CD Wallet + CD Player of MIDI Controller. Trolley fits up to 13" laptop.

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Backpack lets you take a wide variety of your essential gear for your digital set up from one gig to the next. It let’s you safely store your digital controller (Pioneer DDJ-SX3, Native Instruments S8) in the main compartment while in the side entry laptop compartment you can store up to 19” laptop. It has enough space in the two front pockets to store all your other necessities; hard drives, headphone, cables & accessories and is fully padded in all the right places for the ultimate in protection. The backpack has a 4-method carrying system. The UDG Controller Backpack is available in 2 sizes: Medium & Large skillfully designed to fit many different models of equipment safely during transport.

• Weight: 3,95 kg / 8.69 lbs
• EAN: 8717228277481
• Outer Dimensions (W x H x D): 73 x 43 x 22.5 cm | 28.7 x 16.9 x 8.9 inch
• Inner Dimensions (W x H x D): 70 x 40 x 10 cm | 27.6 x 15.7 x 3.9 inch
• Material: Water repellent laminated 600D Polyester exterior

Protection:
• Adjustable foam inserts to customize main compartment to your gear

Extra's:
• 4 compartments: main: for controller, side: for laptop up to 19”, front: 2x for headphone, hard drives, cables & accessories
• 4-method carrying system
• Easy grip zipper pulls
• Convenient carry handle & padded shoulder strap

Fits:
• Up to 19" laptop
• Pioneer DJ DDJ-FLX6, DDJ-1000SRT, DDJ-800, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-RR, DDJ-SR, DDJ-S1, DDJ-T1
• Pioneer DJ XDJ-RR, XDJ-R1, XDJ-Aero
• NI Traktor S8
• Denon DJ Prime 2, MC7000
• Numark NS6II, NS6, 4Trak, N4, Mixdeck Quad
• Rane One,
• Reloop Mixon 4, Touch
• Roland DJ 505
• or similar size controllers

Inspired by the legendary UDG Producer Bag, the UDG Ultimate Producer Bag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

The UDG Producer Bag Large offers increased space for performers using laptops up to 18.4 inch and larger MIDI controllers.

Constructed from high quality fabrics, the backpack style UDG Producer Bag Large features padded walls with an adjustable divider so that you can create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

UDG Producer Bag Large - specifications:

Weight 3,25 kg / 7.15 lbs
EAN 8717228276675
Color Black, Orange inside
Outer Dimensions (W x H x D) cm: 46 x 56 x 25 | inch: 18.1 x 22 x 9.8
Inner Dimensions (W x H x D) cm: 32 x 46.5 x 15 | inch: 12.6 x 18.3 x 5.9
Material Water Resistant Nylon 420D
Protection Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.
Extra's 6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.
Fits Up to 18.4" laptop,
Pioneer Toraiz SP-16, DJS-1000, DJM-750MK2,
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2,
Denon DJ Prime Go, MC6000 MK2, MC3000,
Numark iDJ Live II, Mixtrack II / Pro II,
Rane Seventy, Seventy-Two,
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32,
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2,
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25,
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S,
M-Audio Oxygen 25, Trigger Finger Pro, Xponent,
Stanton SCS.4DJ, DJC.4,
Livid OHM 64,
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25,
various pedalboards,

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG SlingBag Trolley Deluxe (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. This limited edition version of the UDG SlingBag Trolley Deluxe comes with enough storage space for your records and additional equipment like headphones, controllers, mixers or other tools. In addition, it's also possible to transport a 15.4 inch laptop in the velvet padded interior compartment. In addition, the HHV x UDG SlingBag Trolley Deluxe has a more stable road position due to the widened wheelbase, which will not throw you off track even when sprinting to the train. Furthermore, the nylon upper material gave way to extremely durable, coated canvas, without sacrificing the rain protection for the vinyl. Easily replaceable foam pads with hook and loop fasteners provide a variable interior that offers maximum protection for approximately 58 x 12 inch records.

HHV x UDG SlingBag Trolley Deluxe - features/specs:

• soft rubber grip
• padded 15,4 inch laptop compartment
• small inner zip bag
• adjustable shoulder strap
• hide-away 3-stage trolley handle
• smooth rolling wheels with quality bearings
• UTX buckle at main compartment
• 2 x side zip pockets e.g. for headphones
• flap pocket with hook and loop fastenr, zip closure on front
• interior replacable padding with hook and loop fasteners
• code combination lock
• exterior dimensions (H x W x D): 470 x 510 x 310 mm
• interior dimensions (H x W x D): 320 x 390 x 200 mm
• weight: ca. 5,5 kg
• exterior fabric: coated canvas
• lining: 420D nylon

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)