DJ Equipment 1814 Items

Spirit level

Spirit level for optimum positioning of a turntable.

High-tech lubricant for constant velocity

How to use Lube it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Lube it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some lube off your turntable to keep it looking clean.

Please only use Lube it for turntables like Elemental, Primary, T-Line, Essential, Debut, The Classic, Juke Box & X1/X2.
For inverted bearings like RPM Line, Xtension models and Signature Line please use Grease it.

Features:
• Helps a smooth movement
• Easy handling

Amount: 5 ml

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

High-end turntable with 9" evo tonearm

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4 mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/ plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. An Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces.

Supplied either with or without a premium Quintet Blue cartridge, manufactured by the cartridge experts at Ortofon, it can be ready to play within a few minutes of unboxing. Supplied counterweights are suitable for cartridges weighing between 5-14 g. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use.

In the box:
•PerspeX SB without Ortofon Quintet Blue Cartridge
•Connect it E RCA Cable
•Dust cover
•Record clamp
•Adapter for 7“ singles
•Power supply, spirit level

Features:
•Acrylic Plinth
•Sub-chassis made from Corian with magnetic suspension
•Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat
•Inverted main bearing with ceramic ball/plate
•Belt drive with AC motor with DC driven AC generator
•Electronic speed control with 33/45 rpm switching
•Pre-mounted 9" tonearm 9 cc Evolution
•Tonearm bearings with ABEC 7 ballraces

Technical Specifications:
•Speed: 33, 45 (electronic speed change)
•Principle: Belt drive
•Platter: 300 mm MDF/vinyl Sandwich
•Main bearing: Inverted stainless steel with ceramic ball/plate
•Wow & flutter: 33: +/- 0.60% 45: +/- 0.60%
•Speed variance: 33: +/- 0.10% 45: +/- 0.10%
•Signal to Noise: 73 dB
•Tonearm: 9” cc EVO, Carbon
•Effective arm length: 230 mm
•Effective tonearmmass: 8.0 g
•Overhang: 18.0 mm
•Tracking force range: 10 - 35 mN
•Included accessory: 15 volts DC / 800 mA power supply, dust cover
•Power consumption: 6 Watts max / < 0.3 Watt standby
•Dimensions: 460 x 183 x 365 mm (WxHxD)
•Weight: 11.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/04/Manual_6Perspex-SB.pdf

Phono preamplifier

Phono Box E: Pure vinyl listening pleasure at an absolute bargain price!

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.

Features:
• Amplification and RIAA equalisation for MM cartridges
• Design principle inspired by Dr. Sykora
• SMD circuitry
• Special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black casing

Technical Specifications:
• Input impedance: 47 kohms
• Input capacitance: 120 pF
• Gain: 40 dB
• Output voltage(typically): 500mV/ 1kHz at 5mV/1kHz
• Noise floor: 88 dB (A weighted)
• THD: <0,05%
• RIAA deviation: deviation max. 0.5 dB/ 20 Hz - 20 kHz
• Input: 1 pair RCA socket
• Output: 1 pair RCA socket
• Outboard power supply: 18 V/500 mA DC; 220 - 240 V, 50 Hz
• Standby power consumption: < 1 watt
• Power consumption: 20 mA DC
• Dimension W x H x D (D with sockets): 120 x 32 x 100 (106) mm
• Weight: 269 g without power supply

MM Phono Pre-amplifier

Good sound from sound technology
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)

Features
• Amplification and RIAA equalisation for MM cartridges
• Small size allows installation close to record player

107x36x104 (115)mm

Manual: http://www.project-audio.com/inhalt/en/manual/manual_phonoboxmm.pdf

Audiophile MM Cartridge

Lively & robust with a high dynamic range

Intensive research, development and listening tests have been necessary to gain the the desired sound from the new Pick it PRO.

THE DIFFERENCE IN SOUND
Cartridges are electromechanical transducers, where mechanical energy is transformed into an electrical signal. The real difference in sound happens here. The colour and life of the music come from the cartridge.
You cannot judge the cartridge by looking at just one specific part. Experience and the art of fine-tuning make a cartridge unique and special. The perfect combination of components is the key to achieve the great charismatic sound of the Pick it PRO.

Technical Specifications:
• Cartridge principle: MM (Moving-Magnet)
• Output voltage at 1 kHz: 4 mV
• Channel separation at 1 kHz: 22 dB
• Tracking ability at 315Hz: 70 μm
• Frequency response: 20 - 20 000 Hz +/- 2dB
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μm
• Tracking force, range: 1,8 - 2,2 g (mN)
• Tracking force, recommended: 2,0 g (mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 750 Ohm
• Internal inductance: 450mH
• Recommended load resistance: 47kOhm
• Recommended load capacitance: 150-300pF
• Cartriddge weight: 7,2 g

MM phono cartridge for turntables

Beautiful design and superior sound!

The Pro-Ject Pick it S2 MM is manufactured by the cartridge experts at Ortofon and voiced by the design team at Pro-Ject. It is equipped with a special elliptical stylus tip. It provides detailed sound reproduction and expansive imaging. It is a no-nonsense performer with fascinating musical resources. Attached to a strong cantilever, used in DJ cartridges, this cartridge will not just sound great, it is also very strong.
The cartridge is made from a unique combination of technologies. Among others Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which compares with MC cartridges. The superior treble output provides a dynamic and warm sound.
Inspired by the diamond found on the stylus, the Pick it S2 MM is a beautiful design featuring a new and unique semi-transparent grey color. It goes perfectly with most Pro-Ject record players.

Features:
• Moving Magnet principle
• Split pole pins enables frequency responses that compares very well to MC cartridges
• Strong cantilever based in high-end DJ cantilevers
• Suitable for low to medium tonearm masses
• 1/2 inch mounting standard
• High trackability
• Pick it S2 MM should be connected to phono MM inputs
• As with most MM cartridges, stylus may be exchanged

Technical Specifications:
• Weight: 7.2 g
• Stylus type: elliptical
• Frequency response: 20 - 20.000 Hz
• Output voltage: 7 mV
• Recommended tracking force: 1,8 g (mN)
• Trackability (315 Hz, lateral): 70 µm
• Recommended load capacitance: 150 - 300 pF
• Recommended load resistance: 47 kΩ

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

Stabilize your records

Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

OPTIMIZED PLAYBACK OF YOUR RECORDS
This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications:
• Material: Nickel-plated aluminium
• Weight: 190g
• Diameter: 78mm
• Height: 16mm

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

2-way bookshelf speakers

And these are comments from audio testers:
• Well tuned and upbeat basslines
• Lively dynamics
• Surprisingly low coloration
• Good transparency and reasonable image depth
• Bass is fast and tuneful, this is what really matters!

Scope of delivery:
• 2x Speaker Box 5
• 2x speaker grill black
• 1x pair of gloves

Features:
• Audiophile bass-reflex design
• Gold-plated speaker terminal (single-wired)
• Simple Wall-mount included
• Magnetically shielded
• Front cover with magnetic attachment
• Speaker-Box Wall Bracket available as an option

Technical Specifications:
• Sensitivity (1W/1m): 86 dB
• Recommended amplifier power: 10 to 150 watts
• Tweeter: 25 mm Ø silk-dome Neodymium magnet
• Woofer: 130 mm Ø fiberglass cone
• Frequency response: 55 Hz - 20 kHz
• Impedance: 4 - 8 Ohms
• Dimensions: W x H x D 160 x 255 x 210 mm
• Weight: 4.2 kg

Pro-Ject standard dust cover Type 1, suitable for chassis like Debut, 1, 1.2, Xpression.

Stroboscope disc

Control of turntable speed.

Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low. Please note: Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

Record broom

Easy and effective cleaning arm

Cleaning a record collection can be tiresome. There are many ways to de-dust your precious collection. All of them have one thing in common, you have to clean the records while they are put at rest. Sweep it E goes the other way. You can enjoy listening to your records while they are being cleaned. Simply place Sweep it E on your turntable and make sure that the brush is placed before the needle. This way the grooves will get clean right before the cartridge can pick up sound from it.
Sweep it E is made out of durable and resistant aluminium to make sure it lasts a long cleaning-life. With the heavy weight base it stands firmly on your turntable. The uni-pivot arm follows the grooves of your record and cleans them effectively. When you don‘t need Sweep it E you can simply put the arm on its dedicated arm-rest for a comfortable placement. The soft hair-brush guarantees that the records won‘t be harmed during the cleaning process.

Features:
• Gently cleans your vinyl while playing
• Follows the grooves
• Heavy weight base for secure placement
• Uni-pivot design
• Easy setup
• Suitable for Primary, Essential and Debut turntables
• Elegant looks
• Durable materials
• Brush made of natural hair

Technical Specifications:
• Weight: 430 g
• Arm-length: 226 mm
• Arm material: Aluminium
• Brush: Hair

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 1 on solid walls, such as Brick.

Features:
• Resonance-free wall mount for turntables & Hifi
• Playback of records free from any influence by impact noise and vibrating floors
• WMI wall mounts use rigid steel frame construction
• Height-adjustable spikes to level the board
• Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 90 x 415 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)