DJ Equipment 763 Items

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Sometimes it is the little, simple things in a DJ's life that make the job easier: Reloop's vertically adjustable, foldable Laptop Stand Flex is the right choice when there is not much space in the DJ booth or if you need a light, absolutely sturdy laptop stand for the road. When folded, Reloop''s Laptop Stand Flex can be placed in every equipment bag thus becoming a safe, rugged companion for your club gigs. And thanks to the vertical adjustment it can be adapted to every setup.

FEATURES
• Extremely sturdy laptop stand for digital DJs, musicians and producers
• Optimized for laptops from 13'' - 16''
• Easily foldable in no time
• Paddings avoid slipping of equipment
• Simple assembly in a matter of seconds
• Available in black

TECHNICAL DATA
• Max. load capacity: 8.0 kg
• Dimensions tray: 240 x (max.) 400 x 265 mm
• Dimensions (when folded): 280 x 350 x 62 mm
• Weight: 2.21 kg
• Supply without decoration

The Reloop RHP-6 headphones are way more than stylish DJ accessories as, oposed to many other fashion and lifestyle headphones, they do not only emphasize looks. With outstanding sound characteristics, consistent design, and manufacturing that is intended for longevity, the RHP-6 are recommended as your faithful companion: Whether on a plane, the gym or on your way to the next gig, the Reloop RHP-6 is impressive thanks to wearing comfort and smart features and unlimited listening pleasure. Small Construction Great Sound You will be surprised when putting on the RHP-6 for the first time. The amazingly powerful and transparent sound characteristics offer the highest listening pleasure without any restriction regarding mobility and wearing comfort. This is what lifestyle headphones can sound like: Pumping bass, harmonious mids and clear resolution supply a balanced acoustic pattern which will make your head nod - but do not worry, the RHP-6 fits like a seond skin. Excellent Wearing Comfort The elastic and smooth net nylon brackets with sturdy aluminium bar offer safe stability that also allows spirited listening pleasure. Due to the RHP-6's lightweight construction and the comfortable water-repelling artificial leather surface you will get the perfect mixture of robust stability and wearing comfort. And if the RHP-6 are not used, they can be easily folded thanks to the retractable construction so you can put them in your jacket pocket without any problem. Smart Headphones Nothing is more fun than listening to music with a friend. Thanks to the music sharing function the RHP-6 offer the possibility to connect a second pair of headphones to check out the latest tracks when on the road with a friend. Moreover, the RHP-6 disposes of a Smartphone remote control incl. a mic - so you will always be reachable with optimal sound quality while you can control your playlist. A True Eye-Catcher With an absolute fresh design and love of detail, the RHP-6 is a true eye-catcher: Rubberized ear cups with rubber paint finish with bordered Reloop sign, sturdy textile cable as well as a padded and elastic nylon bracket. All components of the RHP-6 were adapted to the respective colour with differing accentuations which create an especially aligned look. Reloop RHP-6: Ear & Eye-Catcher.

FEATURES
• Ultra compact DJ and lifestyle headphones with deep bass, attuned mids and transparent highs
• Closed construction
• Smart retractable construction for easy transport
• Classy rubber paint finish
• Elastic headband with climabsorb net nylon
• Flat comfort construction: Ultra compact and lightweight for high wearing comfort
• One-sided and break-proof textile cable
• Music sharing function: A second pair of headphones can be connected for music routing
• Incl. Smartphone control: Call and music control and mic for Smartphones
• Compatible with common Smartphones such as iPhone, HTC, Blackberry that dispose of a 3.5 mm connection (two-way communication protocol)
• Gold-plated 3.5 mm plug
• Available in 7 colours: black, orange, green, yellow, blue, petrol, grey

TECHNICAL DATA
Headphones:
• Frequency range: 10 Hz - 20 kHz
• Max. input power: 100 mW
• Impedance: 32 ohms +/-15% (bei 1 kHz, 1mW)
• Driver unit: 38 mm
• Acoustic pressure: 95 dB +/-3 dB (at 1 mW)
• Speaker power: 1 mW
• Connection: 3.5 mm jack (gold-plated)
• Weight: 123 g

Microphone:
• Directivity: omni-directional
• Frequency range: 50 Hz - 16 kHz
• Impedance: 8.2 kohms
• Sensitivity: -62 dB +/-3 dB (@ 1 kHz)
• S/N ratio: -58 dB

https://www.reloop.com/media/catalog/product/pdf/2/2/7/227129_Reloop_IM.pdf

The Reloop RHP-6 headphones are way more than stylish DJ accessories as, oposed to many other fashion and lifestyle headphones, they do not only emphasize looks. With outstanding sound characteristics, consistent design, and manufacturing that is intended for longevity, the RHP-6 are recommended as your faithful companion: Whether on a plane, the gym or on your way to the next gig, the Reloop RHP-6 is impressive thanks to wearing comfort and smart features and unlimited listening pleasure. Small Construction Great Sound You will be surprised when putting on the RHP-6 for the first time. The amazingly powerful and transparent sound characteristics offer the highest listening pleasure without any restriction regarding mobility and wearing comfort. This is what lifestyle headphones can sound like: Pumping bass, harmonious mids and clear resolution supply a balanced acoustic pattern which will make your head nod - but do not worry, the RHP-6 fits like a seond skin. Excellent Wearing Comfort The elastic and smooth net nylon brackets with sturdy aluminium bar offer safe stability that also allows spirited listening pleasure. Due to the RHP-6's lightweight construction and the comfortable water-repelling artificial leather surface you will get the perfect mixture of robust stability and wearing comfort. And if the RHP-6 are not used, they can be easily folded thanks to the retractable construction so you can put them in your jacket pocket without any problem. Smart Headphones Nothing is more fun than listening to music with a friend. Thanks to the music sharing function the RHP-6 offer the possibility to connect a second pair of headphones to check out the latest tracks when on the road with a friend. Moreover, the RHP-6 disposes of a Smartphone remote control incl. a mic - so you will always be reachable with optimal sound quality while you can control your playlist. A True Eye-Catcher With an absolute fresh design and love of detail, the RHP-6 is a true eye-catcher: Rubberized ear cups with rubber paint finish with bordered Reloop sign, sturdy textile cable as well as a padded and elastic nylon bracket. All components of the RHP-6 were adapted to the respective colour with differing accentuations which create an especially aligned look. Reloop RHP-6: Ear & Eye-Catcher.

FEATURES
• Ultra compact DJ and lifestyle headphones with deep bass, attuned mids and transparent highs
• Closed construction
• Smart retractable construction for easy transport
• Classy rubber paint finish
• Elastic headband with climabsorb net nylon
• Flat comfort construction: Ultra compact and lightweight for high wearing comfort
• One-sided and break-proof textile cable
• Music sharing function: A second pair of headphones can be connected for music routing
• Incl. Smartphone control: Call and music control and mic for Smartphones
• Compatible with common Smartphones such as iPhone, HTC, Blackberry that dispose of a 3.5 mm connection (two-way communication protocol)
• Gold-plated 3.5 mm plug
• Available in 7 colours: black, orange, green, yellow, blue, petrol, grey

TECHNICAL DATA
Headphones:
• Frequency range: 10 Hz - 20 kHz
• Max. input power: 100 mW
• Impedance: 32 ohms +/-15% (bei 1 kHz, 1mW)
• Driver unit: 38 mm
• Acoustic pressure: 95 dB +/-3 dB (at 1 mW)
• Speaker power: 1 mW
• Connection: 3.5 mm jack (gold-plated)
• Weight: 123 g

Microphone:
• Directivity: omni-directional
• Frequency range: 50 Hz - 16 kHz
• Impedance: 8.2 kohms
• Sensitivity: -62 dB +/-3 dB (@ 1 kHz)
• S/N ratio: -58 dB

https://www.reloop.com/media/catalog/product/pdf/2/2/7/227129_Reloop_IM.pdf

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

Stylus for Goldring E1 MM Cartridge

The CTRL CASE MASCHINE is specially designed to hold the new NI Maschine+, Jam or MK2. Crafted from durable and lightweight Durashock molded EVA foam and a water-rejecting polyester exterior, it is furthermore equipped with a removable (velcro) foam that provides extra protection for all encoders, knobs and buttons.

FITS:

• NI Maschine Jam
• NI Maschine+
• NI Maschine MK2
• NI Maschine

BASICS:

• Lightweight Durashock molded 5 mm EVA foam and polyester exterior shell
• Incl. high density egg foam to protect control knobs, faders and jog wheels
• Sturdy zipper and carrying handle
• Fits including Decksaver® cover
• Compact size fits in any MAGMA bag

SPECS:

• Outer measures: 37 x 34,5 x 8 cm
• Inner measures: 33,5 x 31 x 4 cm
• Weight: 0,7 kg
• Color: black/black (Item-No.: 48004 / EAN-Code: 4041212480040)

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

The Reloop Case, capable of holding approximately 60 records, is the perfect solution for small gigs. Two locks secure the bag against unauthorised access, the protective padding avoids unwanted damage to the vinyl.

FEATURES
• Classic record case
• Extremely robust construction made of aluminum-coated wood
• Removable top
• 2 lockable snap fits
• Foam padding
• Comfortable handle
• Rotund angles

TECHNICAL DATA
• Dimensions: 360 x 220 x 395 mm
• Weight: 2.6 kg
• Holds approximately 60 records

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - DJ S

The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:

• Akai MPC One

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam padding to protect knobs, faders and pads
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 32 x 32 x 13,5 cm
• Inner measures: 28 x 28 x 10 cm
• Weight: 0,8 kg
• Color: black/red (Item-No.: 48031 / EAN-Code: 4041212480316)

Trendy headphone for iPod & Co

super loud, super lightweight & super cool

A cool headphone for the best possible sound reproduction of portable players, like iPod & Co. Hear it Two offers far better audio quality with higher sound pressure levels and superior looks, than many others. Soft and comfortable ear-cushions are swivel mountedmaking it easy to transport Hear it Two in a flat carry case. A high-quality signal-cable made from oxygen-free copper (HP-OFC) with bending protection and gold-plated jack-plug guarantees trouble free performance. Hear it headphones prove again, that outstanding quality does not need to be expensive.

Features:
• Super loud – super light – super cool
• more SPL with iPod & Co (107 dB)
• Lightweight design (77 g)
• adjustable ear-cushion position
• flat transport possible
• high wear comfort
• 3.5 mm jack plug

Technical Specifications:
• Transducer: 30 mm Neodymium driver (dynamic)
• Head-band: adjustable
• Frequency response: 18-22.000 Hz
• Cable material: HPOFC
• Cable length: 1.2 m
• Sensitivity: 107 dB @ 1mW
• Max. sound pressure level: 130 dB
• Impedance: 32 ohms
• Maximum input power: 50 mW
• Connector: 3.5 mm jack plug
• Weight (without cable): 77 g

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin Titanium with white HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf

The UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

UDG Ultimate 7" SlingBag 60 - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high

AT-VM95C/H
VM95 SERIES CONICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japa

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95C/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95C

The 12" Record Case offers space for up to 100 12" records, which you can optimally transport and safely archive in this record case. The lid of the DJ record case is removable and can be used as a sorting pad during DJ'ing.

The butterfly lock protects your collection from theft. Despite its very sturdy design with parts made of aluminium, plastic-coated MDF panels and rivets, the Vinyl Record Case is pleasantly light to carry. The sturdy case handle rests on top.

Since the DJ case is covered with a foam layer on the inside, records are optimally protected against impacts. Deformations due to heat and fading due to sunlight are also reliably prevented when archiving collections in the record case.

Technical details:
• Capacity: maximum 100 12" records
• Material: aluminium, plastic-coated MDF panels
• Protective metal corners safeguard against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Removable lid and butterfly lock
• Dimensions (LxWxH): 36*36*36 cm
• Weight 4,25 kg

The 12" Record Case offers space for up to 100 12" records, which you can optimally transport and safely archive in this record case. The lid of the DJ record case is removable and can be used as a sorting pad during DJ'ing.

The butterfly lock protects your collection from theft. Despite its very sturdy design with parts made of aluminium, plastic-coated MDF panels and rivets, the Vinyl Record Case is pleasantly light to carry. The sturdy case handle rests on top.

Since the DJ case is covered with a foam layer on the inside, records are optimally protected against impacts. Deformations due to heat and fading due to sunlight are also reliably prevented when archiving collections in the record case.

Technical details:

• Capacity: maximum 100 12" records
• Material: aluminium, plastic-coated MDF panels
• Protective metal corners safeguard against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Removable lid and butterfly lock
• Dimensions (LxWxH): 36*36*36 cm
• Weight 4,25 kg

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

The X One is the substructure of the modular plate concept. The X One is made of aluminum and allows you to quickly change any plate on the PT01 Scratch. This makes it easy to reproduce different styles on a record player using different plates.
The X One, an essential basis for the Plate X One system, consists of two parts: the plate and the X One itself.

Only the turntable is delivered, a Numark PT01 Scratch is not included in the package.

A Digital DJ looking for a professional, durable case solution for your Akai MPC One controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai MPC One controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 0,56 kg / 1.232 lbs
EAN 8718969214315
Color Black
Outer Dimensions (W x H x D) 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D) 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Akai MPC One Controller

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with black HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

Goldring E1

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E1 cartridge, the first in the range, utilises a carbon-fibre reinforced cantilever and bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Red
• Cantilever: Carbon
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

DJ On-Ear Headphones

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), Instruction Manual

Specifications
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 215 g
• Frequency Range: 5 - 30000 Hz

The RHP-10 Mono is the latest member of the Reloop headphones family, and the first devoted to one-ear monitoring. The single ear-cup construction is designed for fast cueing of a track which, thanks to the large driver, is also possible when the ambient noise levels are high. The ergonomically designed padded handle and the water-resistant ear pad made of artificial leather are intended to withstand demanding live applications. The sturdy XLR cable connection and supplied spiral cable further emphasise the professional approach, allowing for a clutter-free and reliable performance. For fans of one-ear monitoring the RHP-10 Mono is a true and dependable partner.

FEATURES
• Professional one-ear construction with 50 mm neodymium driver
• Ergonomically padded handle
• Swivel-mounted ear cup
• Water-resistant ear pad made of artificial leather
• Flat comfort construction: compact and light ear cup housing
• Sturdy XLR connection
• Excellent, individually adjustable wearing comfort
• 90° angle adapter for optimised cable routing

TECHNICAL DATA
• Frequency range: 30 Hz – 30 kHz
• Impedance: 24 ohms
• Acoustic pressure: 109 dB
• THD: < 0,2% at 1 kHz, 1 mW
• Rated input power: 300 mW
• Weight: 246 g
• Incl. large artificial leather bag for headphones and accessories & cable

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

Nightclub S Replacement Stylus
The Nighclub S stylus is amongst the top performers in its category, Scratch and Mix.

A spherical diamond and a customised design provide the basis for the cartridge's undeniable supremacy.

The stylus remains in the groove during the scratching and back-cueing, making it unfailingly reliable - even when giving a night-long performance.

Nightclub S Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-18.000 Hz +3 / - 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

The new CTRL Case DDJ-SB2/RB a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-SB3, DDJ-400 or former models such as DDJ-SB2 or DDJ-RB controller. Made of lightweight and rigid Durashock molded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls. Whether you are driving or flying to your next gig, the MAGMA CTRL Case DDJ-SB2/RB will be by your side throughout the journey.

FITS:

• Pioneer DDJ-SB
• Pioneer DDJ-SB2
• Pioneer DDJ-SB3
• Pioneer DDJ-RB
• Pioneer DDJ-400

BASICS:

• Lightweight Durashock molded 5mm EVA foam and polyester exterior shell
• Sturdy zipper
• Including high density egg foam to protect control knobs, faders and jog wheels
• Comfortable carrying handles and detachable shoulder-strap
• Hand-luggage compatible
• Fits inside the MAGMA Rolltop III Backpack
• Compatible with Decksaver® covers

SPECS:

• Outer measures: 52 x 30 x 10 cm
• Inner measures: 49 x 28,5 x 7 cm
• Weight: 1,2 kg
• Color: black/red (Item-No.: 47998 / EAN-Code: 4041212479983)

STYLOPHONE GEN-X1
EXPAND YOUR MUSICAL HORIZONS
Packed with features, the Stylophone Gen X-1 portable analogue synthesizer is the next generation. From quirky beats to haunting melodies, you can twist and warp every note in the palm of your hand.

Beginner or music pro, if you like the synth sound you’ll love the Stylophone Gen X-1

PLAYABILITY
Two ways to make sounds with the stylus. The keyboard to make distinct notes and the sound strip to slide between notes on a scale.

PORTABILITY
Take this synth anywhere. Battery operated with built in speaker. Audio line out for headphones and/or external speaker. Audio in to use as an effects unit.

ENRICH THAT SOUND
New features include, LFO (with square and triangle waves), Low pass filter (cutoff/resonance), Envelope (attack/decay).

ANALOG DELAY FEATURE
Add space to your sound with delay time, feedback and level.

ADDED FEATURES
Sub octaves -1 & -2 switch, enrich your sound by adding a second frequency below your source sound. The Pulse Width Modulation button can be used to create a chorus effect.

CONNECTIVITY
Connect the Stylophone Gen X-1 to your computer and other gear to enhance your sound possibilities! Sound from effects pedals, samples from your phone, and other music gear can be twisted and warped with the Stylophone Gen X-1.

Video: https://youtu.be/JicPeSVO8Io

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime Go? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime Go, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime Go
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

EAN 8718969214339
Color Black
Weight 1,57 kg / 3.454 lbs
Outer Dimensions (W x H x D) 48.5 x 36.0 x 12.4 cm | 19.0 x 14.2 x 4.9 inch
Inner Dimensions (W x H x D) 41.7 x 27.9 x 11.4 cm | 16.4 x 10.9 x 4.5 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Denon DJ Prime Go Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Akai Force controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai Force controller, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

• Weight: 1,57 kg / 3.454 lbs
• EAN: 8718969212076
• Outer Dimensions (W x H x D): 50 x 36 x 12.4 cm | 19.7 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 48 x 34 x 7.8 cm | 18.9 x 13.4 x 3.1 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior, Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy-duty handle
• Convenient shoulder strap
• Easy grip zipper puller
• Fits: Akai Force

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

Contactless Fader by Jesse Dean for your Reloop SPIN turntable.

The JDDX2R-SP is the same design built of the legendary JDDX2RS-A - with extra capability!

No need to take out and calibrate each time - calibrate from the top!

It’s dual rail slide contactless element gives it durability for an aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors and circuitry. There is virtually no cleaning needed with this contactless element.

- Dual rail 45mm slider for stability and smooth action
- Magnetic sensor contactless circuitry
- Two side cut-in adjustment
- Switchable from double cut to 2 channel capability
- FR4 fiberglass PCB faceplates
- Full size fader cap by Cooler Caps!
- 30 second easy installation
- Comes with cut adjuster screw driver

JDDX2R-SP calibration instructions: http://www.zendell.uk/LINKS/JDDX2RS-A_calibration.pdf

JDDX2R-SP double cut instructions: http://www.zendell.uk/LINKS/JDDX2R-SP.pdf

Stylus for Goldring E2 MM Cartridge

A Digital DJ looking for a professional, durable case solution for your Pioneer XDJ-700 / Numark PT01 Scratch Turntable USB? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer XDJ-700 / Numark PT01 Scratch Turntable USB, these cases are perfect for the travelling DJ that needs to protect their equipment.

EAN 8718969211192
Color Black
Weight 1,72 kg / 3.784 lbs
Outer Dimensions (W x H x D) 33 x 32 x 14 cm | 13 x 12.6 x 5.5 inch
Inner Dimensions (W x H x D) 32 x 31.5 x 13 cm | 12.6 x 12.4 x 5.1 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Protective egg-crate foam prevent damage from vibrations and shocks
Extra's Removable divider for cable and power adapter storage
Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Pioneer XDJ-700
Numark PT01 Scratch Turntable USB

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Dimensions inside: 34 x 34 x 35 cm
• Weight 4,25 kg

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg

ULTRA PORTABLE PHONO/LINE USB RECORDING INTERFACE
The description of the Reloop iPhono 2 could not be more appropriate:
"Digitize your vinyl tracks for playing with any current DJ software - quickly and easily."

VARIETY OF CONNECTION OPTIONS
The process of filing your irreplaceable vinyl collection just became a piece of cake. By plugging a turntable into the Reloop iPhono 2 USB audio interface, and then connecting this to a computer (PC or Mac), precious vinyl rarities can now be recorded digitally in crystal clear CD quality thanks to the high-quality digital drivers. It goes without saying that any other audio sources, such as tape decks or Minidisc players can also be connected to the interface for recording.

ENDLESS POSSIBILITIES
But there is more! Why not hook up a mixer to the Reloop iPhono 2 and record your entire DJ set to your computer? The mix can then be instantly uploaded to share with others online, or could just as easily be burnt to a CD for physical distribution - the possibilities are endless.

RECORD YOUR VINYL!
The Reloop iPhono 2 even comes with a full copy of PCDJ DJ LE software and a sample pack from Loop Masters.

FEATURES
• USB phono/line recording interface
• Finish and design in popular Play interface style
• 16 bit A/D converter
• PH/LN switch
• Digitize vinyl easily and quickly
• Inclusive PCDJ DJ LE
• Plug'n'Play system: no additional drivers necessary
• Headphones and RCA output for playback of recorded audio(soundcard) or monitoring through computer (software playthrough)
• Input gain dial
• Signal/clip LED
• Output LED
• Anti-theft: Kensington slot
• USB bus powered

TECHNICAL DATA
• Inputs: 1x phono/line (RCA)
• Ground GND screw
• Outputs: 1x PC (mini USB), 1x output (RCA), 1x headphones (6,3 mm jack)
• Dimensions: 130 x 49 x 115 mm
• Weight: 93 g
• Incl. USB cable, PCDJ DJ software (Reloop edition LE full version) and Loop Masters sample pack

Manual: https://www.reloop.com/media/catalog/product/pdf/2/2/4/224792_Reloop_IM.pdf

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz