DJ Equipment 778 Items

Enter the Exclusive world of Ortofon’s famous moving coil sound!
The Quintet Red is a perfect introduction to the world of Ortofon moving coils.
It features an Elliptical diamond which is cut and polished to Ortofon’s standards.

This entry-level MC cartridge has very high price-to-performance ratio and is a perfect all-rounder for the newcomers to the world of Moving Coil cartridges.

MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The ST-7 transformer is a perfect match for the MC Quintet Red cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.

MC Quintet Red Technical data:
• Output voltage at 1 kHz 5 cm/sec - 0.5 mV
• Channel balance - < 1.5 dB
• Channel separation at 1 kHz - > 21 dB
• Channel separation at 15 kHz - > 14 dB
• Frequency response 20-20.000 Hz - +/-2.5 dB
• Tracking ability at 315 Hz at recommended tracking force *) - 65 μm
• Compliance, dynamic, lateral - 15 μm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 μm
• Tracking force range - 2.1-2.5 g (21-25 mN)
• Tracking force recommended - 2.3 g (23 mN)
• Tracking angle - 20º
• Internal impedance, DC resistance - 7 Ohm
• Recommended load impedance - >20 Ohm
• Cartridge body material - ABS/Aluminium
• Coil wire material - Copper
• Cartridge colour - Red
• Cartridge weight - 9 g
*) Typical value

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for Quintet cartridge.

Ease of use
Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell.

The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

LW-800S is the most sophisticated lead wires composed of Pure Silver and Silver coated wire.
The end of wire is fastened by Rhodium plated terminal.
Since Silver has the best electrical conductive properties of all the metals, the LW-800S silver wire is able to transmits the very clear high tone signals, which brings the brilliant tonality to the sound reproduction.

Technical data:
• 4N Pure Silver wire: 3 x φ 0.26mm
• Silver plated Oxygen Free Copper (OFC) wire: 16 x φ0.10mm

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 8N with the SH-4 headshell requies the LW 8N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

Luxury leadwireset
LW-7N is the hybrid lead wire made of Ultra High Purity Copper wire of 7N and 6 N. The end of wire is fastened by Rhodium plated terminal.
As there is no foreign particle other than Copper 7N (99.99999 % purity) in the wire, music signal can be transmitted without any noise.

Technical data:
• High purity Cu wire 7NCu: 3 x φ 0.26mm
• High purity Cu wire 6NCu: 16 x φ0.10mm

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 7N with the SH-4 headshell requies the LW 7N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

Luxury leadwireset
LW-6N is the 6N lead wire made of Ultra High Purity Copper wire.
The configuration is very sofisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The end of wire is fastened by gold plated terminal.
The tight winding against each other makes the clear transmission of music signals. Clear and crisp tonality.

Technical data:
• High purity Cu wire 6NCu: 7 x φ 0.18mm (Right strands)
• High purity Cu wire 6NCu: 17 x φ 0.10mm (Left strands)

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 6N with the SH-4 headshell requies the LW 6N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome 3D design
The VNL 3D design is developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

The slipmat design uses several elements linked to the DJ culture:
• Scissors stand for "Cutting sounds"
• Equalizer levels picture refers to the mixers' levels
• Spiral symbolises turntable platter when spinning

The effect of animation is fully obtainable when the pitch is set to 33 +8.

Comprises 1 PC carbon fibre stylus brush and 1 PC screwdriver in a plastic cylinder.

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

Stylus for Concorde MkII Elite Cartridge.

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Step into the music with the 2M Red
With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.

Featues:
The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire.
The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red delivers an open, dynamic sound with a slight touch of warmth.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Red
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Next level authenticity with the 2M Blue
The goal for any cartridge should be to reproduce the sound as close to the artists vision as possible, and the 2M blue takes you further on this journey of authenticity. With the 2M Blue, you get serious about listening to vinyl.

Features:
The 2M Blue features a Nude Elliptical diamond and split pole pins with a copper wire.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details compared to the 2M Red model.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 25 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Blue
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Step into the music with the 2M Red
With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.

Featues:
The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire.
The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red delivers an open, dynamic sound with a slight touch of warmth.

2M Red Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Red
• 2M standard and 2M Verso cartridges weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2M Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience.
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze features:

The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Bronze
Cartridge weight - 7.2 g
Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• Cartridge weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2m Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze features:

The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Bronze
Cartridge weight - 7.2 g
Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Next level authenticity with the 2M Blue
The goal for any cartridge should be to reproduce the sound as close to the artists vision as possible, and the 2M blue takes you further on this journey of authenticity. With the 2M Blue, you get serious about listening to vinyl.

Features:
The 2M Blue features a Nude Elliptical diamond and split pole pins with a copper wire.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details compared to the 2M Red model.

2M Blue Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 25 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Blue
• Cartridge weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2M Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

The 2M 78 features an improved engine, which provides a high level of sonic accuracy. The stylus' tip is a Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile. The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M 78 uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.

The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M 78 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 18 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 65 µm
• Tracking force range - 1.6-2.0g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Internal impedance, DC resistance - 700 Ohm
• Internal inductance - 350 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Tracking angle - 20°
• Cartridge colour, body/stylus - Black/Grey
• Cartridge weight without screws - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M 78 (interchangeable with 2M Mono)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation "Unter einem Dach".

Thanks to its easy bike-locking system, the Oonops Drops X Maesh bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The Oonops Drops X Maesh Commuter 45-Bag is waterproof and upholstered to protect your little treasures.

Furthermore, it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ sets. The bag grabs about 65 to 115 singles, depending on the sleeves you use and in which direction the records are stacked. An inner bag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant and refugee background and supports them with inhouse language courses and much more. So if you support the Oonops Drops X Maesh bag you'll support their organisation to grow and to do more great projects they initiate.

Each Oonops Drops X Maesh Bag is a unique upcycled item, the charcoal may vary in nuances.

Oonops Drops X Maesh Commuter 45-Bag - specs:

• weight: 1 kg
• dimensions: length: 28 cm; width: 20 cm (incl. bike-locking system: 24 cm); height: 23 cm
• shoulder Strap: 133cm
• made in Germany

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm
Made in Germany

Support weight for mass drives

The weight made of stainless steel ensures a better contact between the record and the platter. This suppresses mechanical resonances, which greatly improves the scannability of the microgroove. As a result, your music becomes more detailed, has a clearer resolution and a better defined bass. The ergonomic shape ensures easy handling when placing the weight on the record. It is not necessary to screw it onto the plate mandrel. The contact weight is a little over 500 grams.

Details and technical data:
• Precisely processed by CNC milling
• Avoidance of disruptive resonances, which have a negative effect on the scanning by your pickup
• Made of solid stainless steel for the perfect combination of weight (a little more than 500 grams) and size
• Ergonomic shape for easy handling
• Diameter: 73 mm
• Height: 22mm
• Diameter of the hole for the plate mandrel: 7.5 mm
• Made in Japan

Spraying your records with the anti-static spray will reduce crackling during playback.

Cleaning spray for records

Application: Spray the record evenly at short intervals for a few seconds and then dry.

Antistatic cleaning spray for records. Cleaning will reduce the frictional resistance of the needle.

Cleaning spray for records. The high cleaning effect suppresses static electricity. Wipe dry after spraying.

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

Hear the vivid sound experience that music playback offers with Nagaoka's MP-110 tonearm. Especially in the high-frequency range, the elliptical needle cut ensures better detail resolution. This creates a live atmosphere while listening, which is otherwise known from concerts.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel Separation (1kHz): >23dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P110
• Cartridge type: without head shell

With its round diamond, the MP-100 cartridge is particularly suitable for older records. Even scratches and dirt do not affect the pleasant, neutral sound that this system makes possible. The MP-100 is the most affordable scanner in the MP range.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height 18mm
• Needle cut: Round 0.6mm
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel separation (1kHz): > 22 dB
• Channel balance (1kHz): < 2.0 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 21 mN (18-23 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P100
• Cartridge type: without head shell

Cleaning gel for records, floor coverings, joints, blinds or keyboards. Stubborn dirt is reliably removed. Can be used several times.

Replacement stylus Nagaoka JTS-80LB for the pickup JT-80LB.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

Replacement stylus Nagaoka G JN-03D for the pickup DJ-03HD.

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

DJ-03 HD - CARTRIDGE INCL. HEADSHELL

This is the Nagaoka DJ cartridge. With a high output voltage of 6 mV and a recommended tracking force of 3 - 5 g, it is one of the more stable of its kind.

TECHNICAL SPECIFICATIONS:
• Cartridge type: MM
• Configuration: Climax DS/DSM
• Output voltage: 6 mV (5 cm/sec.)
• Frequency Characteristics: 20Hz~20KHz
• Channel separation: 20 dB (1 kHz)
• Channel balance: 2 dB or less
• Load resistance: 47 kΩ
• Load: 100pF
• Cantilever: aluminum alloy
• Needle Tip: 0.6 mil tapered bonded diamond
• Recommended tracking force: 3~5g
• Pickup weight: 5.1g
• Weight with headshell: 15.1g

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

RECORD LABEL PROTECTOR FOR CLEANING

Before cleaning the record, the label protector is screwed onto the record label from both sides so that it does not come into contact with water. In this way, record labels are preserved for a long time.

The tightly woven velvet on the brush surface is ideal for cleaning the sound grooves of the record and also enhances the cleaning effect. Fine dust adhering to the record is removed. In addition to the CL-120 velvet brush, a special brush is supplied to keep the cleaning surface of the brush clean.

LABEL PROTECTION FOR SINGLE RECORDS

Protective device for cleaning EP records with liquids.

Prevent your singles label from getting wet when cleaning the record. A single adapter is of course included in the scope of delivery. Handling is improved with the large handle.

• package contents: Protector case Rubber gasket x2 Rubber blade x2 Adapter for single shot x1
• weight of the case: approx. 137g
• packaging weight: approx. 220g
• pack size: 122x172x50m

Your record player needle also needs cleaning and care. Due to the air pollution caused by both external influences (traffic) and domestic factors (kitchen, smoking), a sticky film can form on your records over time. During playback, the stylus scrapes this deposit out of the record groove, which in turn creates a sticky film around the tip of the stylus, which in turn traps other dirt and dust on your record.

These deposits not only affect sound quality, but can even damage your favorite records. Nagaoka AM-801's special formula efficiently dissolves and removes any sticky substances trapped on the needle.

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.

Premium Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Dimensions:
• External Specs: 367mm x 367mmx 340mm (L x W x H)
• Internal Specs: 330mm x 330mm x 322mm
• Weight: 8.4kg / 18.5lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Our classic "Amp Box" is one of our most commented on and popular vinyl storage units. In order to make it more accessible to the vinyl loving public we have created a "stripped down" version.
What's different you ask? The metal logo plate and decorative screws. What's the same? The beautiful elegant thrill ride of our standard Amp Box;
premium edge glued oak wood, Fender "Ox-Blood" grill cloth, and magnetic push door.
A lovely edition to any listening room. Use it as a standalone vinyl storage unit, or incorporate into your other Music Box display for the ultimate vinyl presentation.
Our Amp Box is durable, stackable, and the perfect tribute to the countless classic guitarists who employed a Fender Tweed amp to make your favorite records.
Protect and house your records in style. Holds up to 65 Records.

**Please note that in order to properly have a door, The Amp Box is slightly wider than our other Music Boxes. It can still be stacked flush with our other Music Boxes, but there will be some extra space at the rear.

Specs:
• Height: 36.6 cm / 14.5 inches
• Width: 36.6 cm / 14.4 inches
• Length: 36.6 cm / 14.4 inches
• Weight: 8.9 kg / 19.6 lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

This stunning Edge Glued Oak Music Box color was developed as a custom project from one of our clients, but we thought it looked so good we decided to offer it in our Music Box Vinyl Storage line. Use the Rosewood color exclusively or mix and match with our other Music Box colors to create a rich, unique pattern to compliment your listening room.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.
After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

In accordance with our mission to provide the vinyl enthusiast with the most beautiful, durable and flexible vinyl storage available we are extremely proud to offer our newest member of the Music Box family the 'Big Ten Inch Record Box'.

So in the words of Steven Tyler " Now whip out your big ten inch."

The 10 inch record has a long history dating back to 1947 and offered exclusively by Columbia Records at the time. The 10 Inch Record was revolutionary in that it offered a chance for labels and artists to present more songs on a single platter than previous iterations. The 10 inch record was originally marketed as a 'Long Playing' or LP record and reigned supreme until about 1954 with the advent and popularity of the 12 inch Record. Still and all, this proud slab of wax continues to live in hearts and bins of many collectors.

The 10 inch record is often offered as a unique keepsake for fans and a chance for an artist to release a superior sound quality recording when cut at 45 rpm. Deep uncrowded grooves!

This special Music Box has been designed to specifically hold and protect 10 inch Vinyl Records. It can used vertically or horizontally.

Internal Dimensions:
• 28cm x 28cm x 28cm

Exterior Dimensions:
• 316mm x 316mm x 298mm (L x W x H)

Sourced and crafted in Europe!

As with all our Oak Music Boxes we use 18mm thick edge glued Oak and 'tongue and groove' joinery in the construction and our oil is composed of Cooked Linseed, White Spirits, pigment and siccatief (a drying agent).

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

minirig MRBT-4 Bluetooth Speaker

The only Speaker you will ever need with an unbelievable 100hrs of battery life!

Experience the culmination of 12 Minirig light years of evolution in design and functionality with the groundbreaking Minirig 4.

Minirig MRBT-4 Bluetooth Speaker - features/specs:

• Dimensions: W = 101.6mm H = 73mm
• Weight: 563g
• Driver: Custom 70mm with neodymium magnet
• Button x3: Power/volume/pairing/and more
• Frequency response: 60Hz - 18000Hz
• Battery life max volume: 5 Hours
• Battery life average use: 30 Hours
• Battery life low volume: 100 Hours
• Charge time (standard): 4 hours
• Charge time (fast USB-C PD): 1.5 hours
• Powerbank function: Yes
• USB-C Power Delivery: Yes (up to 30W)
• Amplifier power: 1 x 50Wrms
• Bluetooth: 5.0 with AAC, hands-free calling, linkup mode & wireless stereo
• Bluetooth Receiver Mode: Yes (line out / headphones)
• Bluetooth Range: >10-30 meters line-of-sight
• Audio input/output: 2 x 3.5mm mini jack socket
• Construction: Anodised aluminium and High Impact ABS
• Weatherproofing: Splash resistant
• Additional features: Volume control, Balance control, Accelerometer, microphone, 5x addressable RGB LEDs, USB-C PD capable, OTA updatable
• App: IOS, Android and Chrome (PC/MAC)

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin Titanium with white HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

Made from 80 0,5l (16oz) recycled plastic bottles, the SOLID BLAZE PACK 80 is a lightweight daypack designed with a minimalistic footprint to accommodate your DJ/production essentials and daily needs.

The SOLID BLAZE PACK 80 is crafted from only the highest quality materials, such as a water-repellent RPET 900D shell and YKK® AquaGuard® zippers to protect your laptop, tablet, timecode records and other expensive gear from the elements. The interior layout features numerous compartments, pouches and zippered pockets for organization and quick access. Travel comfortably knowing your gear is safe inside the MAGMA SOLID BLAZE PACK 80.

FITS:

• Pioneer DDJ-XP2
• Akai MPC Live
• Akai MPC One
• Akai MPK Mini
• Ableton Push 2
• Roland SP-404
• Roland Boutique Series
• NI Maschine MK2
• NI Maschine+
• Rodecaster Pro
• 12" vinyl
• Laptops up to 17”
• Camera gear etc.

BASICS:

• Fabrics made from recycled PET plastic bottles (Global Recycling Standard certified)
• Outer material crafted from roadworthy and water-repellent RPET 900D Polyester (with eco-friendly water- based PU-coating)
• Lining made from RPET TC Polyester
• Lockable dual PVC-coated YKK® AquaGuard® zippers (padlock not included)
• Separate compartment incl. padded laptop (up to 17“) and tablet sleeve (This compartment also fits 12” records)
• Numerous internal pouches, compartments and zippered pockets to organize smaller gear
• Quick-access front-compartment
• Hanging mesh pocket for headphones or camera storage
• Expandable side-pocket for bottle storage
• Comfortable air channel back padding with hidden document pocket
• Contoured and ergonomic riveted shoulder-straps with metal buckles
• Adjustable chest-strap
• Trolley-Sling
• Cabin luggage compatible

SPECS:

• Outer dimensions: 49 x 32 x 20 cm / 19.25“ x 12.5“ x 7.8“
• Inner dimensions: 45 x 30 x 8 cm / 17.75“ x 11.75“ x 3.5“
• Weight: 1,3 kg / 2.8lb
• Color: black/grey (Item-No.: 47893 / EAN:4041212478931)