DJ Equipment 1127 Items

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Flair for your vinyl. Slide one of our weighted 45 rpm adaptors onto the spindle of your turntable to play your favorite 7”. The heavy duty enameled metal disc comes packaged in our custom muslin pouch, perfect for toting along to a party or your next spin session.

This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Screws for mounting OM cartridges on the headshell

Set of 2 screws and 2 nuts for OM series (2.5x9mm)

Ortofon HiFi Maintenance set
Comprises 1 PC fibre stylus brush and 1 PC screwdriver in a plastic cylinder.

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

OM Pro S pre-mounted on SH-4 Black
The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

OM Pro S technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 5 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5,0 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g
Replacement stylus unit - Pro S

The Zomo Recordcase MP-100 V.2 is a very solid quality case which impresses by its generous
volume. In this Recordcase you can store about 100 LPs which can easily be splitted into the two halves because of the 50/50 divide.

This Case is a classic and one of the most selling cases since years. Due to the ergonomic spiral handle the MP-100 V.2 can be carried really
comforatable. The straight design doesn´t need to be explained!

Sheer genius and totally cool! It´s Zomo!

Features Zomo-Recordcase MP-100 V.2
•Capacity: about 100 LPs
•Size: 370 x 370 x 370 mm
•Weight: 6,1 kg

With the recordcase TP-70 XT Zomo has a DJ case in the range which due to its integrated wheels and its generous trolley frame can be rolled very comfortable to the set.

Inside there is space for approximatelly 70 records and the separated side
partitions can hold a micro, mobile phone etc.

Features Zomo Recordcase TP-70 XT
•3 solid wheels
•cool Design
•solid aluminium
•aluminium profiles
•chrome angles
•light weight
•comfortable handle
•lockable butterfly (Vorhängeschloss )
•50/50 devide
•interior foam

Details
•Capacity: approx. 70 LPs
•Size: 485 x 270 x 410 mm
•Weight: 5,9 kg

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

The Eric B. & Rakim Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Missy Elliot "Classic Press Shot" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The OP Art 4 Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

PROS
•Modern turntable
•Bluetooth
•33 or 45 RPM

PRODUCT INFORMATION
•The Lenco LBT-188 is a turntable with Bluetooth functionality. Connecting this turntable to your Bluetooth speaker is child’s play. The ideal set-up for enjoying a full and warm sound while lounging on your couch at home. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your vinyl record at the right speed.

•The LBT-188 from Lenco features a metal turntable, belt drive, an RCA connection and a tone arm with a counterweight. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it against knocks. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003117
•Product height: 12.40 cm
•Product depth: 34.40 cm
•Product width: 41.70 cm
•Number of RCA outputs: 2
•12V car: Yes
•Power option: Power on/off switch
•USB connectors: USB A
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902041139
•Amplifier options: Includes (pre) amplifier
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 5 W

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Wood
•SKU: A003104
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040989
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

Minirig silicon case

MIKE D, MCA & AD-ROCK of BEASTIE BOYS' fame bringing the synergy of skateboarding & Hip Hop to urban street culture in New York City. The 12" slipmat features the bravado of the BEASTIES chilling with their skateboards in this turntable slipmat with a glazed bottom surface.

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1210MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model. The SL-1200MK7 has also further unified the all black design scheme, even in every part, to become more stylish and attractive.

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet

AT-VMN95ML
VM95 SERIES MICROLINEAR REPLACEMENT STYLUS
Aluminium cantilever
Microlinear Stylus
Nude Square Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

AT-VMN95EN
VM95 SERIES ELLIPTICAL NUDE REPLACEMENT STYLUS
Aluminium cantilever
Elliptical Nude Stylus
Nude Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Das Tonabnehmer-Set AT-VM95E/H wird im Audio-TechnicaWerk
in Fukui (Japan) vormontiert, getestet und verpackt.
• Gesamtgewicht 15,5 g

AT-VM95E/H
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95E/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95E

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

AT-VMN95C
VM95 SERIES CONICAL REPLACEMENT STYLUS
Aluminium cantilever
Conical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Dr. Suzuki, Stokyo and Turntable Training Wax give you a traditional style portable 7 inch slipmat with 2 slip sheets included!
Specially cut to fit the Solid Cutz Vestax, PT01 and stock platters.
*****
Dr. Suzuki introduces a new Kuttin' Donut 7" Scratch Performance slipmat, made for Turntable Training Wax!
By using his patent materials Dr. Suzuki is able to have the record sit as flat and thin as possible to the slipmat/platter.
If you experience any doming or warped records, the center label cut out on the slipmat allows the record to sit snug into the slipmat to lessen any wobble/warp issues!
The long-awaited 7 inch Slip Sheet from Dr. Suzuki has been downsized and made carefully with selected materials similar to the classic and popular 12 inch version. Place between the slip mat platter for smoother record control!

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

The UDG Creator Headphone Case is a large carrying bag for DJ headphones such as the Sennheiser HD 25-1.

The Danzig Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Disk Union official Record Cleaner "Reco-Cloth".

Wiping cloths developed by diskunion for professional use.

It quickly adsorbs cleaning solution that incorporates dirt. Special non-woven fabrics are used that do not fluff or leave fibers behind, and have low electrostatic properties.

*Please be careful not to press down harder than necessary, as this may cause scratches on the surface. Cannot be used on surfaces other than the record sound groove or disc signal surface. Use on label surface or sleeves may damage the materials.

VOLUME: 50 sheets

- 3 Main Features as a Professional Cleaner -

Superior Workability - Simple and speedy adsorption and water absorption performance.

Low Cost - Focused on a balance between durability and usability, and acheved both performance maintenance and low running cost.

Harmless and Environmentally Friendly - Additive-free cellulose non-woven fabric made only from non-petroleum based raw materials.

Disk Union official Record Cleaner "Reco-Clean".

Its high penetrating power quickly penetrates deep into the sound grooves, and its strong reducing power envelopes dirt and peels it off from the surface.
Since it powerfully removes mold and fine dust adhering to the sound grooves, it is highly effective in reducing noise caused by dirt.
It also has an extremely high antistatic effect compared to water. Furthermore, it also has a sterilizing and deodorizing effect.

*Not applicable for SP Records (78rpm disc)

VOLUME: 200ml

- 3 Main Features as a Professional Cleaner -

Superior Workability - A simple and fast single component liquid cleaner developed by Disk Union for professional use.

Maintain Sound Quality - Provides quality cleaning without affecting the sound quality. Restores the original sound of the record.

Harmless and Environmentally Friendly - It eliminates the rist of caustic soda production, which is a problem with inexpensive alkaline electrolytic water, and does not contain any other harmful chemical products such as mineral oil-based cleaning ingredients, surfactant, bleach, alcohol and ozone.

45 rpm adapter for large hole 7″ records
Black calavera (sugar skull) with hand painted details
Paint is black light reactive
Material: PLA

Individual adapter comes in clear box.

**Choking hazard: Keep away from small children and pets (non-edible)

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" Orange).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on STOKYO Thin Press©️ Orange 12" Vinyl

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Microfiber record cleaning brush
Anti-static record cleaning brush with extremely fine microfibre bristles. Can be used to apply cleaning fluid or just to remove dust from the record surface.

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

Record puck
Shapely stainless steel centering unit for use with singles.

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

The nano phono V2 phonostage isn’t ruffled by anything.
External interferences are no longer an issue with this fine piece
of engineering. Its meticulously selected SMD components
are assembled by hand in Erlangen and tested several times.
The reward of these efforts is a signal to noise ratio of up to
84 decibels. The input impedance is set using plug-in links,
so there is no loss of quality when using different moving
magnet and moving coil cartridges. The nano phono
headphone V2 additionally contains a powerful headphone
amplifier within the solid aluminium housing for private
listening at the highest fidelity.

FEATURES
Technical Specifications:
• MODE: MM / MC switchable by jumpers (at bottom) / Subsonic filter switchable by jumpers (at bottom)
• AMPLIFICATION: 34dB (MM mode) / 54dB (MC mode)
• INPUT LOAD: 47 kΩ/ 220pF / MM mode / User MC mode
• RIAA ACCURACY: ± 0.4dB @ 20Hz - 50kHz
• THD: < 0.04%
• SIGNAL TO NOISE RATIO: 81dB (A) (MM mode) / 70dB (A) (MC mode)
• HEADROOM: 18dB / MC
• MAX. OUTPUT VOLTAGE: 10V eff (1 kHz)
• RIAA: Nach RIAA (Zeitkonst.: 75µs / 318µs / 3180µs)
• CHANNEL SEPERATION: > 80dB @ 1kHz
• OUTPUT IMPEDANCE: 75Ω
• INPUTS: unbalanced (RCA)
• OUTPUTS: unbalanced (RCA) / optional headphone output (Jack: 3.5mm)
• POWER CONSUMPTION: Max. consumption: 2.3 Watt / In operation: 2.3 Watt / Standby mode: < 0.3 Watt / Off mode: 0.0 Watt
• POWER SUPPLY: ±18V DC / 300mA / (external power supply)
• TOTAL WEIGHT: Approx. 500g (Preamp and power supply)
• DIMENSIONS (W/D/H): Approx. 3.35 × 4.17 × 0.98 inches
• DIMENSIONS (W/D/H): Approx. 85 × 106 × 25mm
• MANUFACTURER'S WARRANTY: 3 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/electronics/CA_Nano%20P+%20Headphone%20V2_D+E.pdf?d=1670854434

The excellent Dr. Suzuki Slipmats are now available in orange!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The WARM4 is a professional analogue rotary DJ mixer with four channels, developed and produced by ECLER in Barcelona.
It has 4 phono/line channels, 2 microphone inputs, classic sharp filters and a 4th order isolator. The WARM4 also includes a unique feature: an analogue subharmonics synthesizer that can be selected per channel and is specifically designed to generate and amplify ultra-low frequencies.
The WARM4 is ECLER's latest analogue rotary mixer, inspired by New York's disco "Paradise Garage", also referred to by François Kevorkian as the "Temple of Music", whose influence has been instrumental in shaping some of today's best clubs. Designed and manufactured in the Barcelona factory, the WARM4 is a mixer that keeps the classic structure of ECLER mixers in mind, but incorporates completely redesigned circuitry and mechanics. This ranges from new circuit boards that further improve the noise floor and dynamic range, to the rotary pots that are carefully hand-assembled by our production team.
Staying true to the innovative spirit since the first A4 mixer in 1971, ECLER presents a DJ tool never before included in a mixer: an analogue subharmonics synthesiser. Inspired by the original device from the "Paradise Garage" DJ booth, we have developed our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the DJ can adapt it individually to the track and the respective sound system.
The WARM4 also features the 4th order isolator already included in the WARM2, as well as 4 mixing channels, 3-band equaliser with full cut per channel and high quality potentiometers from Alps with metal axis. Using an external effects module has also never been easier. The WARM4 can output a PRE/POST fader signal and lets you control and pre-listen to the return signal.
The WARM4 is designed specifically for sound systems that can reproduce subsonic frequencies - for clubs, festivals and events where bass response is crucial.
Unleash a whole new dancefloor experience and take the music experience to the next level!

Technical details:
AUDIO PERFORMANCE
INPUTS:
-
Number of inputs:
LINE: 4 stereo unbalanced inputs
PHONO: 4 stereo unbalanced inputs
MIC: 2 mono balanced inputs
FX RETURN: 1 stereo unbalanced input
Connection types:
LINE 1-2-3-4: RCS STEREO
PHONO 1-2-3-4: RCS STEREO
MIC 3: XLR3-F
MIC 4: Combo XLR3-F/6.3mm jack balanced
FX RETURN: RCS STEREO
Input sensitivity nominal / impedance:
LINE: 0 dBV / 50kΩ
PHONO: -40 dBV / 50kΩ
MIC: -50 dBV / >1kΩ
FX RETURN: 0 dBV / >6kΩ
POWER:
-
Frequency response:
LINE: 10Hz÷30kHz -1dB
MIC: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB
THD+N:
LINE: <0.004%
MIC: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%
CMMR (Common-Mode Rejection Ratio):
MIC: >75dB at 1kHz
Signal-to-noise ratio:
LINE: >105dB
MIC: >90dB
PHONO: >100dB
FX RETURN: >110dB
Trim control / tone control for inputs 1-2-3-4:
INPUTS 1-2-3-4: ±15dB
BASS: +10/-30dB
MIDDLE: +10/-25dB
TREBLE: +10/-30dB
Trim control / tone control for the isolator:
BASS: +12/-70dB
MIDDLE: +12/-40dB
HIGH: +12/-70dB
Sound filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MIDDLE: 200Hz÷6.8kHz
HIGH: 6.8kHz
Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz÷4kHz
MIDDLE:
HIGH: 4kHz
Analogue subharmonics synthesiser:
Input selective filter: 50÷120Hz
Harmonics synthesis: 25÷60Hz
Maximum output level: +12dBV
OUTPUTS:
-
Number of outputs:
HOUSE: 1 stereo balanced outputs / 1 stereo unbalanced outputs.
BOOTH: 1 stereo balanced outputs / 1 stereo unbalanced outputs
HEADPHONES: 2 stereo unbalanced outputs
FX SEND: 1 stereo unbalanced output
REC: 1 stereo unbalanced output
Connection types:
HOUSE: XLR3-M STEREO / RCS STEREO
BOOTH: XLR3-M STEREO / RCS STEREO
HEADPHONES: jack stereo 6.3mm / jack stereo 3.5mm
FX SEND: RCS STEREO
REC: RCS STEREO
Output level / Minimum load:
HOUSE (balanced): 0dBV/600Ω 1V *(+12dB 4V).
HOUSE (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (balanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ
Maximum undistorted output level:
HOUSE (electrically balanced): 21dBV (23dBu)
BOOTH (electrically balanced): 21dBV (23dBu)
HOUSE (unbalanced): 21dBV (23dBu)
BOOTH (unbalanced): 21dBV (23dBu)
ELECTRICAL
Power supply: Internal
AC mains voltage: 90-264VAC 47-63Hz
AC mains plug: 15A IEC inlet plug
Rated power consumption: 39 VA
OTHER
Control mode: Rotary with Alps Blue Velvet potentiometers and Alps RK09L potentiometers
Phantom power: 18VDC/5mA max (ON by default)
Input VU meter: LED 12 segments (-38dBV ÷ +10dBV)
House Mix Booth VU meter: LED 12 segments (-30dBV ÷ +20dBV)
Subharmonics output VU meter: LED 3 segments (-20dBV / 0dBV / +4dBV)
PHYSICAL
Operating temperature: -5˚C ÷ 45˚C
Operating humidity: 20 - 90% RH (no condensation).
Storage temperature: -10°C ÷ 50˚C
Storage humidity: <90% RH (no condensation)
Installation options: Desktop or rack mounting with optional accessories.
Accessories included: IEC cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm
Weight: 5.32 kg
Shipping dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm
Shipping weight: 6.74 kg

• Made from environmentally friendly glassine paper
• including fold-over flap
• perfect for long term storage of high quality vinyl
• 10 pack
• for records with a diameter of 12' (30.48cm), dimensions approx.: 308 x 308 mm
• Made in Japan

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-FLX4, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Pioneer DDJ-FLX4 Controller

Specifications:
• Weight: 1,78 kg / 3.916 lbs
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 48.8 x 27.9 x 8.5 cm | 19.2 x 10.9 x 3.4 inch
• Material: Durashock molded EVA foam

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

PICK UP AND PLAY ON THE GO

Stylophone Gen X-1 Carry Case

EMBOSSED LOGO: Embossed logo on front
PERFECT FIT: Your Stylophone fits neatly and securely into the case.
PROTECTION: The Carry Case is made of EVA to protect your Stylophone
ZIP TAGS: with Stylophone logo
MESH: The Stylophone Carry Case has an internal black mesh which can store accessories

This case is made from hard wearing silver EVA with the Stylophone Gen X-1 logo embossed on the front. It also has 2 Stylophone logo zip pulls, and inside it has a mesh pocket for any accessories.

The Stylophone Gen X-1 fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone Gen X-1 synthesizer

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 25 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H
*) Typical value

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• Cartridge weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2m Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

Step into the music with the 2M Red
With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.

Featues:
The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire.
The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red delivers an open, dynamic sound with a slight touch of warmth.

2M Red Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Red
• 2M standard and 2M Verso cartridges weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2M Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience.
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.