DJ Equipment 710 Items

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

RELOOP FLUX - 6X6 IN/OUT USB-C DVS INTERFACE FOR SERATO DJ PRO

We are excited to introduce the Reloop Flux: A next-generation 6x6 In/out USB-C DVS Interface for Serato DJ Pro. It can transform any conventional mixer into a professional digital vinyl system.

BACK TO THE MUSIC
The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

MAXIMUM FLEXIBILITY
Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato DJ Pro´s internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

FULL CONTROL
The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

HUB INSIDE
The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

STUDIO QUALITY – ANYTIME, ANYWHERE
The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it’s a superior DVS interface which could also be used as an audio interface in the studio.

ALWAYS POWERED
The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

ROBUST AND ROADWORTHY
The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

PLUG & PLAY FOR SERATO DJ Pro
The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

FEATURES:
• 3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96kHz with high-quality D/A converters for superior audio processing
• Also functions as a stand-alone studio interface for recording and playback audio
• 3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• 3x line outputs, including AUX-Out, assignable to the Sampler
• Easy, accessible direct thru buttons for analogue deck playback
• All terminals are visible from the top of the unit for easy installation in dark surroundings
• Bus-powered cable connection for power and audio
• Optional USB-C DC in port for external power supply
• Power delivery support for USB-C devices (max 60W)
• Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
• Power LEDs on the top panel for connection status (Hub, PD, DC)
• 2-port USB-A hub for connecting further accessories
• Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
• Highly robust, extended edge design to protect connection terminals
• Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
• Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

TECHNICAL DATA:
Power:
• USB bus powered: Yes
• Recommended power: 2 A or higher / minimum power: 400 mA
• Maximum USB-PD throughput: 60 W
• Maximum USB Hub power output: 2 x 0.8 A = 8 W
• Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
• Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
• S/N Ratio (output reference level 1 kHz, +4 dB):
• Deck In (LINE signal input: 0 dBV): More than 83 dB
• Deck In (PHONO signal input: -32 dBV): More than 73 dB
• THD + N:
• LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
• PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)

Maximum Gain:
• Deck In (LINE): +4 dB ± 2 dB
• Deck In (PHONO): +36 dB ± 2 dB
• Maximum Input (1 kHz, THD=1%):
• Deck In (LINE): More than +7 dBV
• Deck In (PHONO): More than -25 dBV
• Maximum Output (1 kHz, THD=1%):
• Deck Output: More than +11 dBV

USB:
• USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
• USB 2.0 high-speed (480 Mbit/s)
• Class-compliant on macOS
• USB Power Delivery Protocol 3.0

General:
• Dimensions (WxDxH): 160 x 120 x 34 mm
• Weight: 0.85 kg

Accessories:
• User Manual
• 1x USB type C/C cable
• 1x USB type C/A cable
• 2x RCA cables

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/5/245389_Reloop_IM.pdf

comfortable, solid, universal shoulder pad for
heavy bags and long journeys
a heavy velcro closure makes the pad attachable
to any of our bags with 50mm wide straps.

especially developed for our chateau vinyl record bag range

material: certified cordura nylon

handmade in germany

pictures: airbagcraftworks.com

if it"s time for a new protective cover for your chateau vinyl bag, you can order it here as a seperate item.
all djs know about the hard and sometimes rather shortlife of a record case...
the flight cover is the best way to expand the lifetime of your chateau vinyl or chateau vinyl solo bag.

we strongly recommend not to travel especially fly without it. at work the flight cover can stay on the lower part of the case and doesnt need to be taken off completely.

satisfaction is reported by our frequent flying customers.

material: waterproof cordura nylon, produced in germany.
colour: black

made in germany

pictures: airbagcraftworks.com

taunus 1.5 | com-fi pro | premium nylon night sky

largest and most comfortable version of
our puristic and lightweight backpack
for vinyllovers, travellers and minimalists.

_additional spacious pocket on the inner backside
_smaller inside zip pocket
_holds 16inch+ laptops or up to 40 x 12" records
_cushioned back
_extra double-layered breathable mesh cushioned back
_double-layered breathable cushioned shoulder straps
_4x unique adjustable buttons closure made from recycled
genuine leather
_hidden pocket-dock velcro patch for additional pouch options
_40mm wide straps with cushioning: 55mm

material: italian premium nylon with water-repellent coating
colour: black

h:46-49 x w:42 x d:11 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo

material: water-repellent cotton w/ genuine leather details

colour: deep blue

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

warp x airbag craftworks | 19.4

the 19.4 model is a wider version of warp x airbag craftworks 14.7 with additional capacity for up to 17" laptops.
ideally suited to djs or as an overnight bag perfect for travelling and everyday use.

_water-repellent ykk zippers with 2 sliders
_matt black coated metal carabiners & d-rings
_debossed leather warp logo patch with detailing in warp purple
_leather zipper tags in warp purple
_adjustable shoulder strap with leather shoulder pad
_shoulder pad leather debossed with a2 logo
& warp x airbag craftworks detail
_doubleface heavy duty leather handles with push button
_soft-cushioned back with pocket function
_leather feet/stands with circle debossing
_inside laptop holder space for up to 17" laptops

material: certified cordura® nylon
colour: black

made in germany

42 x 33 x 14 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

minimalistic, cubistic everyday bag.
designed by the a2 department in cooperation with playhouse records.
made from water-repellent cotton with finest italian leather details.
holds all necessities for a modern but craftmenship conscious everyday life.

_small outside pouch on the backside
_2 inside pouches, one with small ykk zipper
_adjustable shoulder strap with embossed leather cushioning &
stiffened bottom
_space for up to 50x 12" vinyls
_bag body and top not cushioned, just lined

material: water-repellent cotton & premium leather

colour: deep blue

made in germany

33 x 33 x 15 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: deep blue

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl solo | nylon deep blue stealth edition

chateau vinyl offers a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl.
advice to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: deep blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl solo | nylon klein blue stealth edition

chateau vinyl offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: klein blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl offeres a perfectly protected,
shock absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water resistent 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton

colour: deep blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: red

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: green

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: olive

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The excellent Dr. Suzuki Slipmats are now available in turquoise!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

STANTON STX
LIMITED EDITION PORTABLE SCRATCH TURNTABLE
RAZOR SHARP CUTS, RIGHT AWAY

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivaled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

SCRATCH WHENEVER, WHEREVER
Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use.
The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB-C input. For extended scratch sessions, the USB-C input can also be used with external power sources for even more cutting time.
To top everything off (literally), the latching lid also functions as a stackable, latching base, to bring the STX to standard turntable height.

WELL-CONNECTED FOR CREATORS
Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8” stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

PERFORMANCE READY
The modification culture is alive and well in the portablism world. Since the inception of this art form, we’ve seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Technical Specifications
Connections (1) RCA line-level output (stereo pair)
(1) 1/4” (6.35 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recordings

Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power (2) 3.7V Li-ion batteries

Dimensions
(width x depth x height)
13.0” x 13.0” x 4.0” (3.25” without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)

Weight 5.3 lbs.
2.4 kg

The THORENS TD 204 was developed for the audiophile beginner. A turntable with sound expansion potential for audiophiles.
The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.

The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9" J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.

The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.

The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.

The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.

SPECIAL FEATURES:
• Smooth running belt drive
• Thorens TP 120 9” tonearm with J shape
• Detachable headshell with SME connector
• Switchable MM phono preamplifier
• Die-cast aluminum platter
• Pre-installed Audio Technics AT95E cartridge

STANDARD REDEFINED
The professional RMX-95 4+1 channel club mixer blurs the lines between analogue workflow and digital technology. The RMX-95 is a cutting-edge, extraordinarily versatile creative tool thanks to its dual-USB 2.0 interface, redesigned effects section, optional MIDI mapping of all controls, and smooth integration of the djay PRO AI DJ software. The club mixer has a familiar and user-friendly interface, making it suitable for both professional and hobby DJs.

SURGICAL SOUND MANIPULATION IN EVERY DETAIL
Will you go for "Classic" or "Kill"? The RMX-95's 3-band EQ can be adjusted to allow maximum sound control for unique results.
Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher and Transformer are just some of the many studio-quality effects included in the brand-new Beat FX unit. The dedicated FX frequency control (LPF/HPF) lets you apply the effects to a specific frequency range for a more unique sound.
And that's not all: Each channel also features a bipolar filter unit (LPF and HPF) with real-time resonance adjustment. This allows for even more complex sound productions.
Two digital displays show parameter changes in real time for precise control that goes beyond hearing.

CONNECTIONS GALORE
The RMX-95 also excels in terms of connectivity: Four CD, two line, and two phono inputs are available on the four input channels. The separate microphone channel has two microphone connections (1 x jack, 1 x jack/XLR combination jack) and an additional AUX input. The master output offers RCA or balanced XLR cable connections. The booth output has two jack connections for stereo operation. However, it can also be used in mono mode. A recording device can be connected to the Rec output via RCA jacks to record DJ sets – regardless of the master output level. Last but not least, the DJ mixer has two jacks for headphones.

MAXIMUM FLEXIBILITY: DUAL-USB AUDIO INTERFACE
Superior 24-bit sound quality is provided by the ten inputs and outputs of the high-quality dual-USB 2.0 interface. The two USB ports allow smooth transitions between DJs and maximum flexibility when using different setups in a single club night. In addition, the active USB hub enables the connection of additional USB devices.

FULLY DIGITAL ARCHITECTURE
The RMX-95's digital architecture transforms the DJ mixer into an individually mappable MIDI controller. As part of this, the setup menu provides a wealth of customisable options, such as EQ frequency range, Neural Mix™ EQ mode, audio interface routing, and zone routing for the booth output.

DVS-ENABLED FOR DJAY PRO AI & NEURAL MIX™
The RMX-95 works with Algoriddim djay PRO AI via plug and play. The DJ app's ground-breaking Neural Mix function lets you isolate beats, melodies, and vocals in the mix in real time. The RMX-95 supports djay PRO AI's advanced DVS integration with Mac, PC, iPhone and iPad. The DJ software is also compatible with streaming services like Tidal¹, Soundcloud¹, Beatport Link¹ or Beatsource Link¹.

CRISP CUTS AND SMOOTH BLENDING
The adjustable curve of all faders provides DJs with the creative flexibility they want while mixing. Turntablists and scratch wizzards can also upgrade the crossfader with the contactless RMX innoFADER.

INDESTRUCTIBLE DESIGN
The club mixer's sleek black metal surface is not only eye-catching but also highly durable. The solid metal housing and hard-wearing metal shafts in all of the built-in potentiometers and switches provide a long service life, even with heavy club use.

FEATURES:
• Professional 4+1-channel DJ club mixer
• DUAL 10 In/Out USB 2.0 audio interface with superb, 24-bit sound quality
• New Beat FX unit with multiple effects in studio quality: Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher,Transformer
• FX frequency control (LPF/HPF) for manipulating effects in selected frequency band
• Sound filters: Bi-polar filter unit with LPF and HPF
• Realtime resonance control for channel filters
• Active USB hub to connect USB accessories
• 3-band EQ with adjustable behaviour (classic/kill)
• Two digital displays showing real-time information of parameter changes
• Digital mixer architecture with extensive adjustment options
• Extensive setup menu, including:
• EQ frequency range (low, high)
• Neural Mix™ EQ mode
• Audio interface routing
• Booth output zone routing (matrix)
• CUE solo option
• RMX innoFADER compatible
• Adjustable linefader and crossfader curves
• MIDI-compatible control elements
• 2x High-retention USB 2.0 port, especially durable
• 2x Mic inputs with dedicated MIC ON button
• 2x Headphone outputs via 6.3/3.5 mm stereo jack with split cue
• 2x Mic inputs with dedicated MIC ON button
• Booth output in stereo or mono
• High-quality and hard-wearing, pure black metallic finish
• Sturdy construction in a metal housing with bolted metal shafts
• Kensington lock to secure the device
• Incl. manual, power cord, and USB cable

Stylus for Goldring G1006 Cartridge

Just needle, not the complete cartridge included!

The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Reduced Moving Mass
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.

Expert Adjustment
The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Specifications:
• Frequency Response: 20 Hz -20 kHz ±3 dB
• Channel Balance: within 2 dB @ 1 kHz
• Channel Separation: better than 25 dB @ 1 kHz
• Sensitivity: 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec
• Static Compliance: 24 mm/N (lat); 16 mm/N (vert)
• Equivalent tip mass: 0.45 mg
• Vertical Tracking Angle: 24°
• Stylus Radius: Elliptical
• Stylus Type: Replaceable
• Load Resistance: 47 kΩ
• Load Capacitance: 150-200 pF
• Internal Inductance: 570 mH
• Internal Resistance: 660 Ω
• Cartridge Mass: 6.3 g
• Cartridge Mass (inc. fixings): 7.6 g
• Fixing Centre: 0.5" (12.7 mm)
• Playing Weight: 1.5 - 2.0 g (1.7 g nom.)
• Replacement Stylus: 1006 - D0

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Record Storage Rack

• Wooden rack for max. 40 records
• P.U. leather finishing
• Easy to assemble and disassemble
• Measurements: 350 x 110 x 255 mm

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

The Roadinger SL-1 is a robust flightcase for 7 inch single records. The elegant DJ Case is not only extremely stable but also survives every DJ use without any problems.
The SL-1 flightcase is very shock and scratch resistant thanks to the robust laminated 7mm plywood. For a strong hold of the cover and easy unlock and lock the helpful butterfly locks.

Features:
• For 100 x 7" vinyl records
• Practical division with lid and lower part.
• Interior completely covered with black felt.
• Aluminium profile frame (22 mm) with steel corners
• 2 high-quality brand butterfly locks
• 8 x rubber feet
• 1 high-quality brand folding handle
• Made in Europe

Technical data:
• Colour: Black laminated
• Outer material: 7mm plywood
• Internal dimensions: 185 (length) x 220 (width) x 350 (height) mm
• External dimensions: 210 (length) x 245 (width) x 385 (height) mm
• Weight: 3,35 kg

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

High quality printed ARTS slipmat.

The excellent Dr. Suzuki Slipmats are now available in yellow!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The excellent Dr. Suzuki Slipmats are now available in magenta!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

iL Logo printed on high quality felt (16 ounces). Two slipmats per package.

iL Logo printed on high quality felt (16 ounces). Two slipmats per package.

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

The David Bowie "Low" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Expand your Phase setup with additional Remotes for non-stop performances in any situation!

The MWM Phase Remote is an accessory item that you can purchase in addition to your existing Phase device. To use Phase Remote, you need a receiver like Phase Essential. The package consists of 1x Phase Remote and an additional free set of 4 magnetic stickers.

MWM Phase Remote - Features:
• Compatible with all phase receivers
• Easy to use: intuitive connection system
• Standard size, fits any turntable
• Operating time of up to 10 hours
• Individually adjustable LED

Included in delivery:
• 1x Phase Remote
• 1x set of magnetic stickers (4 pieces)

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The X One is the substructure of the modular plate concept. The X One is made of aluminum and allows you to quickly change any plate on the PT01 Scratch. This makes it easy to reproduce different styles on a record player using different plates.
The X One, an essential basis for the Plate X One system, consists of two parts: the plate and the X One itself.

Only the turntable is delivered, a Numark PT01 Scratch is not included in the package.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

EAN 8718969212021
Color Black
Weight 3,05 kg / 6.71 lbs
Outer Dimensions (W x H x D) 40.1 x 32.1 x 19.5 cm | 15.8 x 12.6 x 7.7 inch
Inner Dimensions (W x H x D) 38.1 x 30.1 x 17.3 cm | 15.0 x 11.8 x 6.8 inch
Material Aluminum
Protection Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Removable front access panel
Fits Numark PT-01 Scratch Turntable USB, Party Mix, M6 USB, M2, NDX500, DM950,
Pioneer DDJ-200, DDJ-SP-1, DDJ-WeGO4, DDJ-XP2, CDJ-350, CDJ-850-K, DJM-S3, DJM-250MK2, DJM-350, DJM-450, DJM-750MK2, XDJ-700,
NI Maschine Jam, Maschine Mikro MK3, Maschine MK2/ MK3, Traktor Z2,
Ableton Push 2,
Akai MPC One, MPD226, MPK Mini MK2,
Allen & Heath Xone 23 / C,
Arturia DrumBrute Impact, MicroFreak, Minilab,
Elektron Analog Rytm,
Gemini CDJ-300, FirstMix I/O, FirstMix Pro,
Hercules DJControl Inpulse 200, DJControl Instinct, DJControl Starlight, P32 DJ Controller
Livid CNTRL:R,
Mixars DUO MKII,
Novation Launchkey Mini MK3, Launchpad Mini MK3, Launchpad MK2, Launchpad Pro MK3, Launchpad X,
Reloop KUT, Spin,
Roland K-25m, MC-202, TR-707
Stanton CMP800
or similar size cd players and mixers

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Multi Format Turntable Black MK2 Plus (Trolley + Wheels) also features built-in corner wheels on one side for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Multi Format Turntable Black MK2 Plus (Trolley & Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

EAN 8718969212779
Color Black
Weight 10,40 kg / 22.88 lbs
Outer Dimensions (W x H x D) 51.1 x 42.6 x 23 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D) 45.1 x 38.6 x 7.5 cm | 17.7 x 15.2 x 2.9 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Extra's Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
High quality retractable trolley handle
Built-in corner wheels with high quality in-line skate bearings
Fits Technics SL-1200MK7, SL-1200GR, SL-1200GAE, SL-1210GR
Pioneer PLX-1000
Denon DJ VL12 Prime
Reloop RP-8000MK2, RP-7000MK2, RP-4000MK2, RP-2000MK2, RP-1000MK2
Stanton ST-150, STR8.150, T.52, T.55 USB, T.62, T.92 USB
Vestax PDX-3000
Numark TTX
Audio Technica LP120-USB, LP1240-USB, LP120XUSB, LP1240-USBXP, LP140XP, LP3, LP5, LP7, LPW40WN
American Audio Power Drive 2.2
Mixars LTA, STA
or similar size turntables
And accessories

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide silver finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. This flight case also feature built-in corner wheels on one side for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Set Multi Format Turntable Battle & 10"/12" Mixer Black Plus (Laptop Shelf + Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

EAN 8718969212397
Color Black
Weight 20,50 kg / 45.1 lbs
Outer Dimensions (W x H x D) 120.4 x 52.6 x 23 cm | 47.4 x 20.7 x 9 inch
Inner Dimensions (W x H x D) Turntable compartment: 38.7 x 45.4 x 7.5 cm | 15.2 x 17.9 x 2.9 inch
Mixer compartment: 33.4 x 48.4 x 7.6 cm | 13.1 x 19.1 x 3 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Sturdy construction
Full padded interior keeps controller well-protected
High density diamond embossed EVA foam protective padding
Extra's Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
Removable case lid
Adjustable laptop shelf
Built-in corner wheels for convenient transport
Fits 2x any turntable:
Technics SL-1200MK7, SL-1210 MK2
Reloop RP-8000MK2, RP-7000, RP-6000 RP-2000
Denon VL12 Prime
Pioneer PLX-1000
Stanton ST-150
Vestax PDX 3000
Numark TTX
Audio Technica LP120-USB/ LP1240-USB
American Audio Power Drive 2.2 etc.
or similar size turntables

+ 1x any 10" & 12" mixer:
Reloop Elite
Denon DJ X1800 Prime
Pioneer DJM-S9, DJM-909, DJM-707
Rane Seventy Two, Sixty Two, Sixty One, MP-2014, TTM57 MK2, TTM57 SL
NI Kontrol Z2
Thud Ruble TRX
Mixars Quattro, Duo
Vestax PMC 05 Pro4, PMC 07
or similar size mixers

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Multi Format Turntable Black MK2 also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Multi Format Turntable Black MK2 not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

EAN 8718969212762
Color Black
Weight 7,80 kg / 17.16 lbs
Outer Dimensions (W x H x D) 51.1 x 42.6 x 23 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D) 45.1 x 38.6 x 7.8 cm | 17.7 x 15.2 x 3.1 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Sturdy construction
Full padded interior keeps controller well-protected
High density diamond embossed EVA foam protective padding
Extra's Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
Fits Technics SL-1200MK7, SL-1200GR, SL-1200GAE, SL-1210GR
Pioneer PLX-1000
Denon DJ VL12 Prime
Reloop RP-8000MK2, RP-7000MK2, RP-4000MK2, RP-2000MK2, RP-1000MK2
Stanton ST-150, STR8.150, T.52, T.55 USB, T.62, T.92 USB
Vestax PDX-3000
Numark TTX
Audio Technica LP120-USB, LP1240-USB, LP120XUSB, LP1240-USBXP, LP140XP, LP3, LP5, LP7, LPW40WN
American Audio Power Drive 2.2
Mixars LTA, STA
or similar size turntables
And accessories

A Digital DJ looking for a professional, durable case solution for your Novation Launchpad Pro MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad Pro MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 0,99 kg / 2.178 lbs
EAN 8718969214308
Color Black
Outer Dimensions (W x H x D) cm: 30.2 x 30.2 x 4 | inch: 11.9 x 11.9 x 1.6
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handle
Fits Novation Launchpad Pro MK3 Controller

A Digital DJ looking for a professional case solution for your NI F1/X1/Z1 controller? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI-Kontrol F1/X1/Z1 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the F1/X1/Z1 controller, the Case is perfect for travelling DJ's that need to protect their equipment.

Weight 0,42 kg / 0.9284 lbs
EAN 8717228276934
Color Black
Outer Dimensions (W x H x D) cm: 33 x 16 x 6 | inch: 13 x 6.2 x 2.4
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Fits NI Traktor Kontrol F1
NI Traktor Kontrol X1
NI Traktor Kontrol Z1

A Digital DJ looking for a professional, durable case solution for your Korg Volca series? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Volca series, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 0,54 kg / 1.188 lbs
EAN 8718969210072
Color Black
Outer Dimensions (W x H x D) cm: 23.3 x 15.5 x 5.6 | inch: 9.2 x 6.1 x 2.2
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handle
Fits Korg Volca Series:
Volca Beats
Volca Keys
Volca Bass
Volca Sample
Volca FM
Volca Kick
Volca Modular
Volca Drum
Volca Mix

A Digital DJ looking for a professional, durable case solution for your CDJ/ DJM/ Battle Mixers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the CDJ/ DJM/ Battle Mixers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 1,54 kg / 3.388 lbs
EAN 8718969210621
Color Black
Outer Dimensions (W x H x D) cm: 47 x 40 x 14.5 | inch: 18.5 x 15.7 x 5.7
Inner Dimensions (W x H x D) cm: 42 x 35 x 13.5 | inch: 16.5 x 13.8 x 5.3
Material Durashock molded EVA foam
Protection Adjustable EVA padding to customize main compartment to your gear
Extra's Heavy-duty handle
Convenient shoulder strap
Easy grip zipper puller
Fits - Pioneer CDJ-2000NXS2, DJM-900NX2, XDJ-1000MK2, CDJ-900NXS, CDJ-1000MK3, DJM-750 K/S, DJM-800, DJM-850 K/S/W, DJM-900SRT, DJM-T1, DJM-S9, DJM-S3, DJS-1000, DVJ-1000
- NI Traktor Z2
- Numark Scratch, M6 SUB, V7, X7
- Akai MPC2000XL
- Rane Sixty Eight, Sixty Four, MP2015, MP2014, Empath, Sixty One, Sixty Two/Two Z, TTM 56S, TTM 57 MKII, TTM 57SL
- Denon SC5000, SC5000M, S3700, SC2900, SC3900, X1100, X1600, X1700
- Reloop Elite, KUT, RMX-90 DVS, RMX-60, RMX-80, RMP-4
- Allen & Heath Xone 96, Xone PX5, Xone 43C, Xone 42, Xone 62, Xone 92, Xone DB2, Xone DB4, Xone 22, Xone 23C
- Behringer DDM4000
- Gemini CDJ-700, MDJ-1000
- Mixars Quattro, MODEL1
- Technics SH-EX1200
- Vestax TR-1
or similar size mixers and cd players
or check UDG Bag Finder

A Digital DJ looking for a professional, durable case solution for your Akai MPC One controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai MPC One controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 0,56 kg / 1.232 lbs
EAN 8718969214315
Color Black
Outer Dimensions (W x H x D) 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D) 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Akai MPC One Controller

The UDG Ultimate DIGI Trolley To Go constucted with a solid body structure trolley bag with in-line wheels and a two stage-trolley handle makes it the ideal bag for those long airport walkways. Built for the frequent flying DJ, with room for your valuable digital DJ gear, it has a large central compartment, a removable divider with an organiser section for your audio interface and headphones. A padded laptop sleeve to fit a 15" MacBook Pro is provided to protect your computer with two external pockets and a single internal mesh pocket providing storage for cables and documents. The Digi Trolley To Go is the perfect long distance travelling partner.

Weight 5,10 kg / 11.22 lbs
Outer Dimensions (W x H x D) cm: 35.5 x 52 x 28 | Inch: 14 x 20.5 x 11
Inner Dimensions (W x H x D) cm: 31 x 39 x 19 | inch: 12.2 x 15.4 x 7.5
Material Water Resistant Nylon 420D
Protection Padded main compartment
Integrated combination lock
Extra's Adjustable divider with organizer panel for audio interface & headphone
Two external accessory pockets+single internal mesh pocket
Retractable handle with 2-stage trolley system
Ergonomic detachable shoulder strap
Fits - Up to 15" laptop, headphone,
- Pioneer DDJ-XP2, DDJ-200, CDJ-800 MK2, CDJ 900, DJM-750 K/S, DJM-800, DJM 850 K/S/W, XDJ-1000, DDJ-WeGO 3/ 4,
- NI Traktor Z2,
- Numark Scratch
- Reloop Digital Jockey-2, RMP-4, RMX-60, RMX-80,
- Denon DN-S3700, DN-X1100, DN-X1600, DN-X1700,
- Akai MPD32,
- Ableton Push,
- Allen & Heath Xone 42, Xone 43C, Xone 62, Xone 92, Xone DB2, Xone DB4,
- Behringer DDM4000,
- Hercules DJ Control Wave,
- Novation Twitch,
- Rane Sixty Two/Two Z, Sixty Eight, Sixty Four,
- Roland Aira MX-1,
- Vestax VCI 100 MK2,
- or check UDG Bag Finder

These sturdy UDG slipmats are a nice accessory for your turntables! A bit roughy, steady black slipmat with the UDG logo printed in white or Gold/Bronze with Japanese texts. The Slipmats are being shipped in pairs of two.

Weight 0,10 kg / 0.22 lbs
Outer Dimensions (W x H x D) Diameter: 30.5 cm | 12 inch, Thickness: 0.2 cm | 0.1 inch
Inner Dimensions (W x H x D) Not Applicable
Material Felt
Protection Not Applicable
Extra's Logo printed in plastisol. 12 inch diameter. Sold in pairs.
Fits Any record