DJ Equipment 376 Items

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record stabilizer - Silver - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Go retro with our EQ-001 wireless headphones!

Get the complete retro look by pairing your WE-001 cassette player with the EQ-001 wireless headphones from We Are Rewind! Bringing 12 hours of wireless audi, and integrated microphone and 3 different preset equalizer modes, they work just as fine with your smartphone.

Interchangeable ear cushions
Find the style that suits you best, thanks to 3 interchangeable ear cushions (orange, yellow and black), and let the nostalgia flow.

Listen for hours
Lightweight and comfortable thanks to its adjustable headband, the EQ-001 has a 12-hour Bluetooth battery life. So you can listen to your favorite mixtapes without strain.

Built-in equalizer
As for sound, you can personalize your listening experience by choosing from 3 different equalizer modes: "Signature", "Balanced" and "Bass Boost".

"GO" button
Compatible with our WE-001 cassette players, you can also use these headphones with your smartphone. Listen to your music, pause it, answer a call, hang up... all with a simple click on the "GO" button.

Integrated microphone
Last but not least: a double-click microphone and an integrated digital MEMS microphone make it easy to activate and deactivate Siri, Google Assistant and other voice assistants.

Weight: 0.404 kg

What's in the box:
• EQ-001 wireless headphones
• micro USB charging cable
• interchangeable ear pads (orange, yellow and black)
• two-year WE ARE REWIND warranty

Stylus for Goldring E1 MM Cartridge

A Digital DJ/ Producer looking for a professional, durable case solution for your NI Traktor X1 MK3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor X1 MK3, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Black soft fleece interior
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• NI Traktor X1 MK3

Specifications:
• Weight: 0,43 kg / 0.946 lbs
• Outer Dimensions (W x H x D): 33.8 x 14.4 x 6.8 cm | 13.3 x 5.7 x 2.7 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam

The new MAGMA 45 RECORD-BAG 50 holds up to 50 x 7-inch records and is perfect for shorter DJ-sets or record digging. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records.

FITS:
• 50 x 7” Vinyl-Singles
• 45 Adapters

BASICS:

• Constructed of water-resistant 1680D Polyester
• 1 thick cm EVA padding and integrated PVC walls for ultimate protection
• Strong zipper
• Internal mesh pocket for 45 adapter storage
• Convenient carrying-handle and ergonomic shoulder-strap
• Fits inside most backpacks

SPECS:

• Outer measures: 21 x 21 x 12,5 cm
• Inner measures: 18,5 x 18,5 x 11 cm
• Weight: 0,7 kg

45 Adapter not included.

Glow N Dark version of our world famous 45A seven inch vinyl record adapter.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

Great for DJ's spinning in clubs or the perfect night light for vinyl fiends.

Made in New York City at the Wax Rax lab.

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

ATN-XP3
Replacement Stylus for AT-XP3
Conical Bonded Stylus
Carbon fibre-reinforced ABS cantilever
Durable design for DJ application

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

The Bundle contains 5x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Here comes the add-on to our latest concrete turntable collaboration between HHV and BETONAT: the 100% Concrete Vinyl Stand. With a simple and straightforward design featuring clear shapes, this stand celebrates the fusion of urbanism, music, and subculture.

Handcrafted from 100% concrete, this vinyl stand is aesthetically pleasing and its minimalistic design complements any modern living space.

Whether you’re a collector or just starting out, the Vinyl Display Stand is the perfect way to show your favorite records.

Original HHV × BETONAT Vinyl Display Stand
Suitable for 7″ vinyl singles & 12″ vinyl LP, not for double LP
118 mm length x 48 mm height x 60 mm width
0.55 kg pure concrete
100% handmade in Berlin Neukölln
Beautiful gift box

We are happy to introduce the Reloop Premium Modular Bag XT: The professional travel bag for the Reloop Mixtour/Pro and other modular controllers.

PROFESSIONAL TRAVEL BAG FOR THE RELOOP MIXTOUR PRO
The Reloop Premium Modular Bag XT is a professional transport bag that has been especially designed for the reliable protection and transport of the Reloop Mixtour/Pro and other modular controllers. Its high-quality materials and well thought-out details make it ideal for use in clubs and at festivals.

STABLE BASE & SPACE-SAVING DESIGN
The bag is equipped with a convenient carrying handle for easy transport and a snap hook for easy attachment to your luggage. Additionally, it comes with an adjustable and detachable shoulder strap, ensuring flexibility in how it can be carried. A mesh pocket inside helps you keep your cables and accessories organized. The durable zippers are built to withstand everyday use.

HIGH-QUALITY FABRICATION
The Reloop Premium Modular Bag XT is made of lightweight yet sturdy Durashock moulded EVA foam with a protective polyester outer shell. The removable pads are especially designed for the Mixtour/Pro. The bag is also compatible with other compact controllers such as Native Instruments Traktor X1, Traktor Kontrol Z1, Traktor Kontrol F1, Allen & Heath Xone K2.

THE PERFECT COMPANION
In addition, the bag has large, non-slip rubber feet for stability, durable zippers for everyday use, an adjustable and detachable shoulder strap for easy transport, as well as a handy carry handle and snap hook for convenient luggage attachment. This bag is the ideal companion for DJs who want to transport their equipment safely and in style.

FEATURES:
• Professional travel bag for the Reloop Mixtour/Pro and other modular controllers
• High-quality fabrication and details, designed for club and festival use
• Recesses on the top serve as a non-slip and raised base for the Reloop Mixtour/Pro
• Plenty of storage space for power supply or power bank with an additional integrated mesh pocket with a strap for securing cables and other accessories
• Additional two Velcro straps to keep the controller in place
• Made of lightweight, sturdy Durashock-molded EVA foam with a protective polyester outer shell
• Removable padding inserts, tailored to fit the Mixtour/Pro
• Suitable for many other compact controllers such as Native Instruments Traktor X1, Traktor Kontrol Z1, Traktor Kontrol F1, Allen & Heath Xone K2
• Large, non-slip rubber feet to ensure a secure grip
• Durable zippers for everyday use
• Adjustable and detachable shoulder strap
• Including a convenient carrying handle and a snap hook for easy luggage attachment

One-Touch Polymer
Stylus Tip Dry Cleaning System

STYLUS TIP Dry Cleaning System
• Made from an innovative solid polyurethane (PU) polymer.
• Ultra-soft, highly elastic and strong adhesive ability to keep the Stylus in pristine condition.
• Liquid-free. Solvent-free

Winyl One-Touch contains an innovative solid polyurethane (PU) polymer, specially designed to provide exceptional cleaning for record player stylus needles to ensure top quality sound.

The polymer is soft and highly elastic, with strong adhesive properties to remove dust and microscopic dirt, reducing surface noise and distortion on the playback. In addition, its cleaning system allows to clean the corner-gap between cantilever and stylus.
The polymer has been developed to ensure that it leaves no residue on the stylus, due to its dry-cleaning system, liquid-free.

One-Touch is safe and easy-to-use. Place the headshell above the polymer, lower the cartridge slowly until the stylus needle is inserted into the polymer, lift it up. The dirt will adhere to the polymer surface, leaving the needle clean.

One-Touch Polymer is washable and reusable. If the surface of the polymer becomes heavy soiled after repeated uses, simply rinse it with tap water and rub gently the surface with a finger to loosen dirt. Drain and let dry. The polymer will recover its cleaning properties to use it again. By keeping One-Touch in good condition, you will be able to use it for years with the same effectiveness as the first day.

PS Clear Case 41 x 40 x 15 mm
Polymer 30 x 30 x 3 mm (PU sheet)

• Made in Spain

Manual Videos:
https://www.youtube.com/watch?v=Eb-QxvH2Ezk
https://www.youtube.com/watch?v=zkPnvE6gHog

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Set of 2, One-Sided Slip Mats

A portion of proceeds will go to savethechildren.org benefiting relief efforts in DRC, Sudan, Haiti and Gaza.

The artist formerly known as Mos Def, now Yasiin Bey, teams up with Talib Kweli again for a second Black Star album. This merch drops with the first widely available vinyl edition that is also available at HHV.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

CNC milled to RIAA specs from solid aluminum available in seven stylish colors:

7 delicious flavor's - Lime, Onyx, Cherry, 24K, Grape, Alloy, Blueberry

Made in the USA in New York City.

Flight case for Ortofon Concorde MkII

The Bundle contains 3x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

25 replacement filters for Degritter record cleaning machine.

45 rpm adapter for large hole 7″ records
Chocolate dipped strawberry heart
Each adapter is hand painted
Individual adapter comes in clear numbered box
Material: PLA
Weight: .02 kg
Dimensions: 10.6 × 15.25 × 5.1 cm

*vinyl record not included
**Choking hazard: Keep away from small children and pets (non-edible)

The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal