DJ Equipment 754 Items

The Bundle contains 10x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 3x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

The Fent Plates Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Reloop SPIN cartridge system is suitable for scratching, due to the spherical stylus, and is ideally suited for the portable playback of records. With a high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
• Optimized for portable record playback
• Suitable for scratching due to high tracking ability
• Spherical stylus
• Very low vinyl wearout

TECHNICAL DATA
• Frequency range: 100 Hz - 10 kHz
• Output voltage (3.54 cm/s): 180 - 360 mV
• Tracking force range: 4 - 6 g
• Recommended tracking force: 5 g
• Weight: 1.8 g (+/- 0.5 g)

Reloop''s slipmats are made of quality felt and facilitate particularly good anti-slipping abilities. Placed between the platter and a record they facilitate scratching and back cueing.

TECHNICAL DATA
• Made of high-quality felt

The Reloop Modular Stand was designed to exactly fit the performance pad controller Reloop Neon, guaranteeing solid foothold with ideal working height. Ideally, the Reloop Modular Stand is positioned near a turntable, allowing comfortable access to the sample, cue, loop and effect sections. Thanks to convenient snap-in knobs, the Reloop Modular Stand's setup is quick and easy. The stand is also compatible with other modular controllers, effect devices or even the iPad and it can also be used in the studio, in order to position your desktop synthesizer or drum machine at an ideal working height.

FEATURES
• Sturdy stand for modular controllers
• Optimized for Reloop Neon
• Quick and easy setup
• No tools necessary for setup
• Locking via snap-in knobs
• Easy setup in two steps
• Extra flat construction
• Ideal working height: perfect for positioning near turntable
• Also compatible with other modular controllers, effect devices, desktop synthesizers, drum machines or iPad

TECHNICAL DATA
• Dimensions (folded): 261 x 22 x 184 mm
• Dimensions (assembled): 261 x 185 x 184 mm
• Weight: 861 g
• Supply without decoration

The Reloop Case, capable of holding approximately 60 records, is the perfect solution for small gigs. Two locks secure the bag against unauthorised access, the protective padding avoids unwanted damage to the vinyl.

FEATURES
• Classic record case
• Extremely robust construction made of aluminum-coated wood
• Removable top
• 2 lockable snap fits
• Foam padding
• Comfortable handle
• Rotund angles

TECHNICAL DATA
• Dimensions: 360 x 220 x 395 mm
• Weight: 2.6 kg
• Holds approximately 60 records

ELITE

• High Performance DVS Mixer for Serato DJ Pro, developed in close collaboration with renowned international turntable artists
• 16 large, velocity sensitive RGB performance pads: Control up to 12 performance modes per deck
• DUAL 24-bit interface & 3x non-contact Innofader Pro with high-resolution technology

POWER UP YOUR PERFORMANCE POTENTIAL
Reloop ELITE is a professional DVS mixer for Serato DJ Pro, developed in close cooperation with international turntable artists. Due to the combination of a performance-oriented layout and powerful features, ELITE allows you to fully realise your DJ potential. The full version of Serato DJ Pro, including the DVS Expansion Pack, is provided plug 'n' play. Additionally, ELITE comes with two Serato control records with NoiseMap™ technology.

DUAL 10 IN/OUT USB 2.0 AUDIO INTERFACE & ERGONOMIC BROWSE SECTION
ELITE comes equipped with a powerful DUAL 10 In/Out USB 2.0 Audio Interface, which offers outstanding sound characteristics in 24-bit resolution. Two computers can be connected at the same time via both USB ports. This way a seamless transition from one DJ to another during performance becomes as easy as possible. In the battle mixer's center you find the ergonomically designed browse section, that allows efficient one-handed control and which can be switched independently from the source selection (USB A or B) via the Focus computer control.

2x OLEDs & DEDICATED LOOP CONTROL
The two OLED displays show real-time information regarding effects, BPM, beat parameters and setup menu. Each deck has a separate loop section which can be controlled intuitively, thanks to the push encoder which also disposes of a manual loop function. Via the LED bar the selected loop length is directly visible.

INDIVIDUAL PAD MODES
In combination with the RP-8000 MK2 it is possible for the first time to control the pad modes on various devices individually and simultaneously.

SMART LINK USB HUB
External devices, such as MIDI controllers, storage media or smartphones can be connected and loaded via the two smart link USB ports. When connecting RP-8000 MK2 turntables, these will automatically recognize the corresponding deck (1 or 2). All of ELITE's control elements are MIDI compatible and can be used to control any compatible software.

STURDY METAL CONSTRUCTION WITH RESISTANT FINISH IN DEEP BLACK METALLIC
Thanks to the sturdy construction of robust metal and high-quality control elements, such as the screwed metal potentiometers, ELITE is built and ready for rough daily life. The two high-retention USB ports guarantee a safe connection and offer protection against unwanted signal loss. The surface is processed with a hard-wearing finish, which is especially resistant against scratches and is finished in a timeless deep metallic black.

INCLUDING BPM SUPREME VOUCHER
With any purchased ELITE the DJ record pool adds a 90 days Premium Membership with a value of 60 $ for their huge audio and video library - containing latest releases directly received from the record labels.

FEATURES
• Professional DVS Performance Mixer for Serato DJ Pro
• Developed in close collaboration with renowned international turntable artists
• Control up to 12 performance modes per deck
• 3x mini Innofader Pro (latest generation) on-board, featuring twice the resolution and innovative non-contact technology, allowing for ultra precise cuts and smooth operation
• 2 high-contrast OLED displays showing real-time information of effects, BPM, beat divisions and setup menu
• Colour-coded Tweak FX: stand-alone effects with bipolar control
• Toggle between Filter, Crush, Flanger, White Noise and user mode via the mode button with RGB indication
• DUAL 10 In/Out USB 2.0 audio interface with superb sound quality in 24-bit
• Two independent effect units for controlling Serato DJ Pro FX
• 3 assignable effect slots: each with dedicated activation buttons
• Dedicated and flexible effect controls for each channel
• Mini-fader for FX Level/Depth control
• 2 FX activation modes: either hold or toggle on/off
• Combines a performance-oriented layout with powerful features
• 16 large, velocity sensitive RGB performance pads
• 4 mode buttons, three layers with 12 performance modes (Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Slicer Loop, Saved Flips, Platter Play, Transport, user mode and the brand new scratch bank mode) and dual layer parameter buttons per side
• Performance pad modes can be controlled independently on each deck
• Enhanced performance with RP-8000 MK2 turntables: for the first time, pad modes can be controlled individually on each device simultaneously
• Customisable fader curves and reverse function (hamster switch)
• Digital adjustment of cut in/out points in the setup menu
• Dedicated loop section with push encoder, loop length LED bar & manual loop control
• Ergonomically designed browse section for efficient one-handed use
• Convenient cue fader system with dedicated controls for volume and mix
• Easily switch between 2 computers using the Focus PC controls
• Extensive USB routing capabilities: sampler and AUX channel can be individually routed through the Serato FX units (send/return)
• 3-band isolator EQ with full kill characteristic
• Smart Link USB ports: auto RP-8000 MK2 deck recognition
• Can also be used as an active USB hub for external devices
• Mic/line input with 2-band EQ, independent echo effect and on/off talkover switch
• 2 headphone outputs via 6.3/3.5 mm stereo jack
• Booth ouput in stereo or mono
• MIDI-compatible control elements
• High retention USB ports
• Rock-solid construction in a durable metal design
• High-quality and hard-wearing deep black, metallic finish
• Kesington Lock to secure the device
• Incl. full version of Serato DJ Pro with DVS Expansion Pack, 2x Serato Control Vinyls with NoiseMap™ technology, USB cable, power cord, operating instructions and 90 days BPM Supreme membership

TECHNICAL DATA
• Frequency response: 20 Hz - 20 kHz
• Inputs: 2x phono RCA, 2x line RCA, AUX RCA, mic/line TRS, 2x Smart - Link USB ports (type A), 2x USB ports (type B)
• Outputs: Master XLR (balanced), master RCA (unbalanced), booth TRS (balanced), rec RCA (unbalanced), headphones 6.3/3.5 mm stereo jack
• EQ range at 70 Hz, 1 kHz, 13 kHz: -∞ dB (total kill)/+9 dB
• EQ range Mic at 100 Hz, 10 kHz: -12 dB/+12 dB
• Dimensions: 290 (w) x 414 (d) x 107.5 (h) mm (potentiometers: 18.5 mm)
• Weight: 6 kg
• Software requirements: Serato DJ Pro 2.1.2

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238128_Reloop_IM.pdf

The ATH-TWX7 truly wireless earbuds are designed to provide listeners with a high-fidelity experience and features to customise listening sessions. Leveraging the 5.8 mm high-resolution drivers from the flagship ATH-TWX9, the ATH-TWX7 offer detailed music playback, including support for 24-bit/96 kHz audio files all within a compact and easily portable design. These earbuds also provide audio-controlling features accessible with a touch of the earbud sensor to activate the digital hybrid noise canceling technology.

The ATH-TWX7 wireless earbuds use digital hybrid noise cancelling technology to eliminate unwanted noise and provide a crystal-clear sound performance. Whether users are immersing themselves in music or staying connected to their surroundings, the easily accessible hear-through and talk-through functions allows for quick adjusting to prioritise conversations or hear external announcements.

The built-in MEMS microphones, combined with beamforming technology, guarantee the speaker’s voice is heard loud and clear, even in noisy environments. Users can choose between two call modes – Natural Mode for quieter settings or Noise-Reduction Mode for bustling environments. The mute button allows for the ability to silence the microphone during calls, and the A-T Connect app provides the ability to evaluate voice tone and clarity.

Prioritising comfort, the ATH-TWX7 earbuds are designed to discreetly and snugly fit ears of all sizes. The package includes two sets of eartips in XS/S/M/L, offering the choice between comfortable, soft earbud tips for extended listening sessions or secure-fitting standard earbud tips for enhanced fit.

The built-in Soundscape feature offers audio designed for stress relief, such as tranquil nature sounds and additional choices such as ambient music for enhanced focus and soothing sounds to aid in relaxation and meditation.

With approximately 6.5 hours of playback and up to 20 hours with the non-slip portable charging case, users can take the ATH-TWX7 on the go with confidence. Also designed with IPX4 water-resistant protection, these headphones are equipped to brave rain, water, and sweat.

Included Accessories:
• 30 cm (1.0') USB-A/USB-C charging cable
• Soft earbud tips: XS, S, M, L
• Standard earbud tips: XS, S, M, L

With two beamforming microphones in each earbud, the ATH-TWX7 clearly captures your voice, even in noisy environments. Plus, you can choose from two call modes – Natural Mode (indoors/quiet) and Noise-Reduction Mode (outdoors/noisy) – to get the best audio quality anywhere.

The ATH-TWX7 lets you control your sound space. Apply the noise-cancelling function to focus on work, the talk-through function to accentuate the voices/announcements around you, or the unique soundscape function to produce sounds for concentrating, relaxing or meditating.

The compact earbuds fit discreetly in your ears, providing a comfortable listening experience for hours on end. Select from two sets of included eartips – soft and standard – to customise your fit.

Digital hybrid noise-cancelling technology, driven by small MEMS microphones in each earbud, eliminates unwanted sounds. The hear-through function allows you to listen to music while walking, playing sports, doing housework, working remotely, or using public transportation.

Using the ATH-TWX7 with the Audio-Technica CONNECT app gives you access to many additional functions, such as the low latency mode, Natural and Noise-Reduction call modes, ambience control (including presets and hear-through), EQ, touch sensor settings, soundscape function (for relaxing or focusing), and more!

Features:
• Compact, truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling, hear-through, talk-through) can be employed for music playback and calls
• MEMS (micro-electromechanical system) mics, a high-accuracy noise-cancelling processor, and a proprietary filter work together to deliver stellar noise-cancelling performance
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Talk-through function lets you hear voices/announcements around you by instantly lowering playback volume and capturing ambient sounds while enhancing the vocal bandwidth
• 5.8 mm high-resolution drivers, adopted from the ATH-TWX9, deliver an extended high-frequency range and improved sound detail
• LDAC codec compatibility enables playback of 24-bit/96 kHz audio files
• Includes two sets of eartips (XS/S/M/L): Soft eartips for greater comfort during long listening sessions and standard eartips for a snugger, more secure fit
• High-performance MEMS mics, beamforming technology, and two selectable call modes (Natural and Noise-Reduction) ensure crystal-clear call quality
• Call test function allows you to check the tone and clarity of your voice
• The microphone can be easily muted during calls via built-in controls on the earbuds
• Soundscape function plays relaxing sounds of nature, a masking noise to help you concentrate, or sounds for meditation
• Private Timer function provides advanced personal time management
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6.5 hours of continuous playback and up to 13.5 hours of extended use with the charger (for 20 hours total, when noise-cancellation is in constant use)
• A-T Connect app gives you additional control: activate low latency mode, select Natural and Noise-Reduction call modes, adjust and save EQ to the headphones, change codecs, and more
• Compact charging case with non-slip finish is easy to handle and carry with you wherever you go
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable
* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8mm
• Frequency Response 10 - 40,000Hz
• Sensitivity 100dB/mW
• Impedance 16 ohms
• Weight Headphones: Approx. 4.7 g (0.17 oz) (L side), approx. 4.7 g (0.17 oz) (R side); / Charging case: Approx. 47.5 g (1.7 oz)
• Charging Time Headphones：Approx. 1.5 hours* / Charging case：Approx. 3 hours (USB charging), Approx. 5 hours (wireless charging). Depending on operating conditions.
• Operating Temperature 5℃ - 40℃ (41℉ to 104℉)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.5 hours with ANC on and 7.5 hours with ANC off (Headphones), / Max. approx. 20.0 hours with ANC on and 24.0 hours with ANC off (if charging case is used in combination) Depending on operating conditions.
• Microphone Type MEMS type
• Microphone Sensitivity -38dB（1V/Pa, at 1kHz）
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones：DC3.85V lithium ion battery (built-in) / Charging case：DC3.85V lithium ion battery (built-in)
• Water-Resistant (drip-proof) Performance IPX4 (headphones only)
• Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips: Soft (XS, S, M, L), Standard (XS, S, M, L)
Notes *Charging takes longer when the temperature is below 10℃ (50℉) or above 30℃ (86℉). For product improvement, the product is subject to modification without notice.

Bluetooth®
• Bluetooth® Version Bluetooth Ver.5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12mW EIRP
• Frequency Band 2.4GHz band（2.402GHz～2.480GHz）
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec LDAC, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1kHz, 48kHz, 96kHz (When using LDAC codec)
• Supported Bit Rates 16bit, 24bit (When using LDAC codec)
• Transmission Band 10Hz - 47,000Hz (when LDAC 96kHz sampling), 20Hz - 20,000Hz

Premium Class All-in-One Music Music System

The new generation of C70 All-in-one music system with CD, radio, USB playback, Bluetooth and Chromecast built-in, all in an elegant & timeless design.

Newly Developed Speaker Units & Acoustic Lens
The 8-cm woofer unit offers significantly better basic characteristics as a result of various improvements made, such as the reduced weight of the voice coil, enhanced airflow and increased rigidity of the diaphragm. The woofer provides superb response and sound clarity to reproduce mid- and high-frequency sound comfortable to the ear. The high-res-ready 2-cm dome tweeter unit features a lighter silk diaphragm to provide beautiful lingering sound. What’s more, the acoustic lens is optimised for the new tweeter shape and enhances the expansiveness of reproduced sound.

3 JENO Engines
In order to faithfully reproduce the information of rich sounds with the 2.1ch configuration, three “JENO Engine” full digital amplifier units have been equipped. In addition to utilising the excellent processing capacity of the three units and faithfully driving the left and right channels and subwoofer, “Space Tune”, which optimises the sound quality depending on the installation status, has been realised.

Space Tune™
The SC-C70MK2 features Space Tune™ Auto to achieve optimally balanced sound easily with the press of a button. This function measures test tones played through a mic that is built into the SC-C70MK2 to analyse the distance to walls and the effect of reflections. It then automatically optimises the sound field. In addition, the Space Tune™ function includes 3 presets (Free, Near the Wall, and Near the Corner) for easy setting, and uses a Technics Audio Center app to precisely adjust the sound quality to the listening position.

iOS device calibration is available for more precise adjustment
Measure room acoustic conditions by using microphone integrated in iOS devices.
Tune DSP parameters to optimise acoustic performance.

Multi-room
With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room*. In addition, if you use Technics Audio Center app and have another app compatible Technics devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ f SC-C70MK2 compatible streaming music. * The Google Home App is required.

Complete Compatibility
In addition to CDs and radio, this model is newly compatible with Chromecast built-in, and supports a wide range of music streaming services. Furthermore, it is also compatible with Spotify Connect, Amazon Music, Deezer and Internet radio. It is also compatible AirPlay 2, Bluetooth Wi-Fi, network playback, USB memory playback and analogue/optical input to allow you to enjoy various sound sources with one unit. The UI of our iOS/Android smartphone app, “Technics Audio Center App” has also been redesigned, making it easier to use than ever before.

Favourite Function
Up to 9 presets can be set on the main unit, such as favourite internet radio stations, a DEEZER playlist, and USB songs. This makes it possible to listen to your favourite music without even starting up an app.

Specs:
• Newly Developed Speaker Units & Acoustic Lens
• JENO Engine (Jitter Elimination and Noiseshaping Optimization)
• Load Adaptive Phase Calibration (w/o Calibration function)
• Space Tune™
• Twin Power Supply Circuit System
• CD High-Res Re-master

Technical Data:
• Accurate Digital Technology:
- JENO Engine (Jitter Elimination and Noise-shaping Optimization)
- Load Adaptive Phase Calibration (w/o Calibration function)
- Space Tune™
- Twin Power Supply Circuit System
- Re-master

• Noiseless Signal Technology:
- Twin Power Supply Circuit System
- Optimally Activated Circuit System
- CD High-Res Re-master

• Emotive Acoustic Technology:
- Acoustic Lens and Louver
- Dual bass reflex port

• Output Power:
- Front speaker: 30 W + 30 W (1 kHz, T.H.D. 1.0 %, 6Ω, 20 kHz LPF)
- Subwoofer : 40 W (70 Hz, T.H.D. 1.0 %, 4Ω, 20 kHz LPF)

• Speaker Unit: Woofer : 8 cm Cone Type x2 / Tweeter: 2 cm Dome Type x 2 / Subwoofer: 12 cm Cone Type
• Analogue Input Terminal: AUX IN x1 (φ3.5mm)
• Digital Input Terminal: Optical Digital x1, USB-A
• Headphone Output: Yes (Ø3.5 mm)
• Disc Compatibility: Audio CD, CD-R/CD-RW (CD-DA, Discs recorded and finalized on recording devices)

• USB-A:
iPod/iPhone/iPad: No
Support Codec:
- WAV
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- FLAC
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- DSD
Yes (2.8 MHz, 5.6 MHz, 11.2MHz)
Yes (2.8 MHz, 5.6 MHz, 11.2MHz)
- AIFF
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- ALAC
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- AAC
Yes (32, 44.1, 48, 88.2, 96 kHz / 16-320 kbps)
Yes (32, 44.1, 48, 88.2, 96 kHz / 16-320 kbps)
- MP3
Yes (32, 44.1, 48 kHz / 16-320 kbps)
Yes (32, 44.1, 48 kHz / 16-320 kbps)

• DLNA: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
• Ethernet Interface: LAN (100 Base-TX/10 Base-T)
• Wi-Fi:
- IEEE 802.11 a/b/g/n/ac
- 2.4 GHz / 5 GHz Band
• Chromecast built-in: Yes
• Works with Google Assistant: Yes
• AirPlay 2: Yes
• Bluetooth® (Support codec): Yes (AAC, SBC)
• TIDAL / Spotify: Yes* / Yes*
• Tuner: DAB/DAB+/FM
• Power Supply: AC220-240 V, 50 Hz / 60 Hz
• Power Consumption: 45 W
• Dimensions (W x H x D): 450 x 143 x 280 mm
• Weight: Approx. 8.0kg
• Accessories: Remote Control, AC Cord, DAB Indoor Antena 、Batteries for Remote Control

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer DDJ-REV5 Controller + power adapter, extra cables

Specifications:
• Weight: 2,26 kg / 4.972 lbs
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
• Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
• Material: Durashock molded EVA foam

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: NI Kontrol S3, S4 MK3, S8, Pioneer DDJ-800/ RX/ SX3/ SR2, XDJ-RR, Reloop Mixon 4, Numark NS6II, NVII
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Removable front access panel
• Fully lined interior egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 69,2 x 46,7 x 18,1 cm
Inner: 68,2 x 45,7 x 17,1

Weight: 6,3 kg | 13,8 lbs

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES
• Fits: 1x Pioneer DDJ-1000
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 4,60 kg / 10.12 lbs
• EAN: 8717228279959
• Outer Dimensions (W x H x D): 92.2 x 49.2 x 16.0 cm | 36.3 x 19.4 x 6.3 inch
• Inner Dimensions (W x H x D): 91.0 x 48.0 x 8.5 cm | 35.9 x 18.9 x 3.3 inch
• Material: Durashock molded EVA foam

Protection:
• Water repellent laminated nylon exterior
• Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• Pioneer DDJ-REV7, XDJ-RX3, DDJ-RZ, DDJ-SZ2, DDJ-SZ

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck
foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: Technics SL-1200MK7, SL-1200GR, Denon VL12 Prime, Reloop RP-8000 MK2, Pioneer PLX-1000/ 500
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with trong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Rear cable access hole with cover
• Protective egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 49 x 42,3 x 21 cm
Inner: 48 x 41,3 x 20 cm

Weight: 4,55 kg / 10.01 lbs

UDG Ultimate Flight Case Portable Z-Style DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down. A quality piece of furniture for venues, clubs and rental companies, built with industrial-strength materials. Constructed from sturdy 9mm thick plywood, the outer sides are laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern. It features edge roller wheels for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading.

• Weight: 36,50 kg / 80.3 lbs
• EAN: 8718969213998
• Outer Dimensions (W x H x D): Folded: 119.5 x 61.0 x 23.7 cm | 47.0 x 24.0 x 9.3 inch
• Outer Dimensions (W x H x D): Opened: 119.5 x 91.3 x 71.1 cm | 47.0 x 36.0 x 28.0 inch
• Material: Heavy duty construction of 9 mm thick plywood

Protection:
• Powder coated anodized hardware
• Heavy duty construction of 9 mm vinyl laminated plywood
• Laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern
• Solid aluminum profiles
• Dual anchor rivets with included washer

Extra's:
• UDG heavy-duty spring-loaded handles
• Roller wheels with high quality in-line skate bearings for convenient transport
• Utility shelf for storage
• High grade aluminum UDG logo plate
• Secure stacking due to stackable ball corners

Fits:
• Holds a Maximum Weight of 45 kg/ 100 lbs. Evenly Distributed

A creative performer looking for a professional, durable case solution for the Wolfmix W1? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Wolfmix W1, this case is perfect for the travelling creative performers that needs to protect their equipment.

FEATURES:
• Fits Wolfmix W1
• Cover main material 600D polyester with 5 mm EVA durashock
molded body
• Mesh compartment for power adapter, extra cables
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

• OUTER DIMENSION WIDTH HEIGHT DEPTH: 22.9 25.4 11.7 CM / 9.0 10.0 4.6 INCH
• INNER DIMENSION WIDTH HEIGHT DEPTH: 19.9 22.4 6.2CM / 7.8 8.8 2.4 INCH
• WEIGHT: 0.5 kg 1.1 lbs

A Digital DJ looking for a professional, durable case solution for your Pioneer RMX1000 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer RMX-1000 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,45 kg / 0.99 lbs
• EAN: 8717228278310
• Outer Dimensions (W x H x D): cm: 37 x 19 x 7 | inch: 14.5 x 7.5 x 2.8
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper puller
• Convenient carry handles

Fits:
• Pioneer RMX-1000 Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Rane One? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Rane One, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Rane One
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
72,00cm

HEIGHT
43,00cm

DEPTH
14,00cm

INNER DIMENSIONS

WIDTH
68,80cm

HEIGHT
34,70cm

DEPTH
6,80cm

WEIGHT
2,27kg

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

Specifications:
• Weight: 2.35 kg / 5.18 lb
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ SC LIVE 2, MC7000
• Reloop Mixon 8 Pro, Mixon 4,
• Hercules DJControl Inpulse T7

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Styli protection caps, pair

From the explosive Marshall signature sound to the everlasting design, every detail of these headphones has been painstakingly refined. Featuring 100+ hours of wireless playtime combined with a rugged and foldable design, Major V is best paired with your next great adventure.

MAJOR V KEY FEATURES:
• Marshall signature sound
• 100+ hours of wireless playtime
• Rugged and foldable design
• Customisable M-button
• Wireless charging
• Bluetooth LE Audio-ready

MARSHALL SIGNATURE SOUND
We’ve fine-tuned the Marshall signature sound you know and love with custom-tuned dynamic drivers, and reduced distortion meaning you can hear your music with absolute clarity.

100+ HOURS OF WIRELESS PLAYTIME
Packing 100+ hours of wireless playtime, you can be gone for days and never be left without a soundtrack. Major V can be charged using the quick charge option, so you’ll dive back into the session in no time.

RUGGED AND FOLDABLE DESIGN
It takes a lot to wear Major V down thanks to its rugged design. These headphones are also foldable so that you can easily pack them away and be gone for days.

CUSTOMISABLE M-BUTTON
Instantly access your favourite features thanks to Major V’s M-button and the Marshall Bluetooth app. Just press the M-script logo to open the Spotify Tap default function, your EQ settings or voice assistant.

WIRELESS CHARGING
Wireless charging means it’s simple to give Major V a boost when needed. Just rest your headphones on a charging pad and you’re good to go. Major V can also be recharged using a USB-C charging cable included in the box.

BLUETOOTH LE AUDIO-READY
Major V is geared up for Bluetooth LE Audio. This future-proof technology will deliver superior sound quality and open a new world of audio sharing possibilities with Auracast™.

MAKING THINGS LAST LONGER
The in-app battery preservation feature enables you to reduce how quickly your battery ages, so you can get more out of your headphones for longer. 86% of the plastic in Major V is recycled*, made from preloved products including used electronic devices and CDs, extending the lifecycle of these discarded items.
*33% of the product consists of plastic of which 86% is GRS certified post-consumer recycled plastic. Percentage breakdown is based on weight and excludes any plastic that can be found in electronical components due to the lack of detailed material knowledge in every component.

PRODUCT DETAILS:

AUDIO SPECIFICATION:
• DRIVER TYPE: DYNAMIC
• DRIVER SENSITIVITY: 106 DB SPL (100MV @ 1KHZ)
• DRIVER IMPEDANCE: 32 Ω
• FREQUENCY RANGE: 20-20,000 HZ
• DRIVERS: 40 MM

BATTERY:
• PLAY TIME: 100+ HOURS OF WIRELESS PLAYTIME
• BATTERY PRESERVATION: YES
• WIRELESS CHARGING: YES
• QUICK CHARGING: 15 MINUTES CHARGING GIVES 15 HOURS OF WIRELESS PLAYTIME
• CHARGING TIME: 3 HOURS TO FULL RECHARGE

CONTROLS AND CONNECTIVITY:
• WIRELESS CONNECTIVITY: BLUETOOTH 5.3
• WIRED CONNECTIVITY: 3.5 MM INPUT/OUTPUT
• CONNECTIVITY: BLUETOOTH + WIRE
• BLUETOOTH RANGE: 10 M / 30 FT
• CUSTOMISE SOUND: YES
• CONTROLS: CONTROL KNOB, M-BUTTON
• VOICE COMMAND: NO
• CODECS: SBC + MPEG-2 AAC + LC3
• MICROPHONE & REMOTE: YES
• ACTIVE NOISE CANCELLATION: NO

COMPATIBLE APPS:
• APPS: MARSHALL BLUETOOTH APP

PHYSICAL UNIT:
• WEIGHT: 186 G / 6.56 OZ
• WATER RESISTANCE: NO
• COLORWAYS: BLACK
• COLLAPSIBLE: YES
• HEADPHONE TYPE: ON-EAR

INCLUDED IN THE BOX / BOX CONTENTS:
• MAJOR V HEADPHONES
• 3.5 MM AUDIO CORD
• USER MANUAL AND LEGAL AND SAFETY INFORMATION
• USB-C CHARGING CABLE

Screws for mounting OM cartridges on the headshell

Set of 2 screws and 2 nuts for OM series (2.5x9mm)

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Wireless Noise Cancelling Headphones

Your Style, Your Stance.
The ATH-S300BT wireless noise cancelling headphones not only provide high-quality audio reproduction and the freedom to enjoy it anywhere, but best-in-class battery life, as well. With up to 90 hours of continuous use on full charge, you never need to worry about charging on the go. And when the battery runs low, a mere three minutes of charging will give you up to 2.5 hours of new battery life.

The ATH-S300BT wireless headphones boast advanced features like digital hybrid noise-cancelling, to let you enjoy a private, high-quality sound space, a hear-through function so you can remain aware of your surroundings when you wish, and a multipoint pairing function, allowing you to seamlessly switch between two connected Bluetooth devices.

The neutrally coloured wireless headphones feature fold-flat housings with a distinctive terrazzo marbled pattern and ergonomic earpads that fit comfortably over the ears for a sleek, attractive look. But there’s more to these headphones than just a pretty face. The headphones are also equipped with 40 mm drivers for powerful, full-spectrum sound.

In addition, the headphones are equipped with a built-in microphone for crystal-clear communication on calls, easy-touch buttons in the earcup for convenient control of volume, playback and more, and a low latency mode to minimise sound delay when gaming or watching videos. The ATH-S300BT wireless headphones are compatible with Siri and Google Assistant, and come with a 1.2 m (3.9") cable (with in-line mic and control) to give you the option of using a standard wired connection.

Power That Lasts - 90-Hr Battery Life
With the ATH-S300BT, the music – or videos or games or calls – never has to stop. The best-in-class battery life gives you up to 90 hours of playback. And when the battery’s low, a quick three-minute charge provides you with an additional 2.5 hours.

Your Sound Space - Digital Hybrid Noise Cancellation
Small MEMS microphones are built into the housings to pick up and cancel ambient noise. When selected, the system deploys both feedforward and feedback processes to give you the best active noise cancellation you can get.

Complete Your Look - Comfort and Style
We designed the ATH-S300BT wireless headphones to look and feel as good as they sound. With versatile neutral colouring, a distinctive terrazzo marbled pattern trim, and ergonomic earpads, you can count on these headphones to keep you in comfort and style. Plus, the housings fold flat for easy storage and transport.

Convenient Features - You're In Control
Select the noise-cancelling function to block outside noise and keep things quiet, or select the hear-through function to stay in touch with your surroundings and engage in conversations. As an added convenience, the headphones are equipped with a multipoint pairing function that lets you switch seamlessly between two connected Bluetooth devices.

Features:
• Wireless over-ear headphones with digital hybrid noise-cancelling technology let you enjoy a private, high-quality sound space
• Class-leading battery life with up to 90 hours of continuous use on a full charge with ANC off and 60 hours with ANC on
• Get 2.5 hours of use on a 3-minute rapid charge (via USB-C connection)
• Hear-through function allows you to hear ambient sounds (plus your own unmuffled voice) so you can talk to others around you without removing your headphones
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Sleek design with versatile, neutral colouring, distinctive terrazzo marbled pattern on the housings, and ergonomic earpads for a comfortable fit
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
Headphones
• Type Closed-back dynamic
• Driver Diameter 40 mm
• Frequency Response 20 to 20,000 Hz
• Sensitivity 103 dB/mW
• Impedance 44.5 ohms
• Weight Approx. 258 g (9.1 oz)
• Charging Time Approx. 2.5 hours
• Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time Continuous transmission time (music playback): Max. approx. 60 hours(when Bluetooth on, noise cancelling on) / Max. approx. 90 hours(when Bluetooth on, noise cancelling off)
• Microphone Type Headphones: MEMS type; Cable: Electret Condenser
• Microphone Sensitivity Headphones: -38 dB (1 V/Pa, at 1 kHz); Cable: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response Headphones: 50 to 10,000 Hz; Cable: 100 to 10,000 Hz
• Microphone Polar Pattern Headphones: Omnidirectional; Cable: Omnidirectional
• Power Supply DC 3.85 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12"), USB Type-A / USB Type-C) & Cable with inline mic and control (1.2 m (3.9')/3.5 mm (1/8") gold-plated stereo mini-plug (4 pole / L-shaped))

Bluetooth®
• Bluetooth® Version Bluetooth version 5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec AAC, SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20 to 20,000 Hz

* The above figures depend on operating conditions.

Woburn III is guaranteed to fill any space with immersive, home-shaking Marshall signature sound. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume. Woburn III is ready for the future of Bluetooth technology and has been built ready to deliver next-generation Bluetooth features the moment they are available.

WOBURN III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising of high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA + HDMI)
With so many ways to connect to Woburn III, getting the right sound for listening to music or watching TV has never been so effortless. Connect to your speaker directly from your device using Bluetooth, RCA or 3.5 mm input. Woburn III also has an HDMI input, which allows you to connect Woburn III to your TV for a uniquely Marshall viewing experience.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 90 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15W CLASS D AMPLIFIERS FOR THE MIDS
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT
• HDMI INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 400 X 317 X 203 MM / 15.75 X 12.48 X 7.99 IN

MULTI-FUNCTIONAL
The Reloop RMX-44 BT is a 4-channel Bluetooth DJ club mixer in classic design, including a Bluetooth input with cue function, which offers numerous application possibilities. The intuitive Club mixer layout guarantees a simple overview and allows experienced artists to find their way around immediately.

FLEXIBLE USABILITY
With 9 inputs and 4 outputs, as well as a 3-band EQ and bipolar filter unit per channel, the RMX-44 BT is not only a full-fledged DJ club mixer, but thanks to Bluetooth compatibility and the 2-band EQ microphone section with talk-over function, it is also ideal for bars, mobile DJs and home setups.

UNIVERSAL CONNECTIVITY
Thanks to the Smart Connectivity Bluetooth input, Smartphones, laptops as well as iPad’s and other devices can be connected quick and easily. In combination with its numerous other connection opportunities, the RMX-44 BT is up to any challenge and adapts perfectly to any application.

FREQUENCY MIXING IN DIGITAL SOUND ARCHITECTURE
For creative frequency mixing, the RMX-44 BT offers dedicated, bi-polar sound filters per channel to allow smooth low- and high-pass fading. The fully digital sound architecture enhances your sound to be clear and punchy in every situation.

HIGH QUALITY DESIGN
The sturdy metal construction and scratch-resistant surface with a deep black metallic finish make the RMX-44 BT extremely durable, despite frequent use and transport. The fabrication meets the industry’s highest quality standards and is visually and haptically particularly attractive. In addition, the stylish and timeless design blends perfectly into any DJ setup.

FEATURES
• 4-channel Bluetooth DJ club mixer
• 9 inputs, 4 outputs
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs
• Smart connectivity Bluetooth input with cue function
• 3-band EQ
• Sound filter, bi-polar filter unit with LPF and HPF
• High-quality surface in deep black metallic
• Fully digital architecture for outstanding sound
• Sturdy metal construction
• RMX Innofader compatible
• Crossfader curve adjust
• Mic channel with 2-band EQ & talk-over ''Active Ducking Technology'' for mic channel
• Headphones output (6.3 mm jack)
• Incl. power cord, instruction manual

TECHNICAL DATA
• Frequency range 20 Hz – 20kHz
• Inputs: 2x Phono RCA, 6x Line RCA, 1x Mic XLR/Jack
• Outputs: 1 Master XLR (balanced), Master RCA (unbalanced), Booth RCA (unbalanced), Rec RCA (unbalanced), headphones (6,3 mm jack)
• EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
• Dimensions: 320 x 106.4 x 379.4 mm
• Weight: 5,4 Kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/3/243591_Reloop_IM.pdf

JC-20 RECORD JACKET COVER

Protect your records from dirt and dust with these outer sleeves for 7" singles.

• dimensions: 190 x 190 x 0.10 mm
• selling unit: 20 pieces
• Made in Japan

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

Go retro with our EQ-001 wireless headphones!

Get the complete retro look by pairing your WE-001 cassette player with the EQ-001 wireless headphones from We Are Rewind! Bringing 12 hours of wireless audi, and integrated microphone and 3 different preset equalizer modes, they work just as fine with your smartphone.

Interchangeable ear cushions
Find the style that suits you best, thanks to 3 interchangeable ear cushions (orange, yellow and black), and let the nostalgia flow.

Listen for hours
Lightweight and comfortable thanks to its adjustable headband, the EQ-001 has a 12-hour Bluetooth battery life. So you can listen to your favorite mixtapes without strain.

Built-in equalizer
As for sound, you can personalize your listening experience by choosing from 3 different equalizer modes: "Signature", "Balanced" and "Bass Boost".

"GO" button
Compatible with our WE-001 cassette players, you can also use these headphones with your smartphone. Listen to your music, pause it, answer a call, hang up... all with a simple click on the "GO" button.

Integrated microphone
Last but not least: a double-click microphone and an integrated digital MEMS microphone make it easy to activate and deactivate Siri, Google Assistant and other voice assistants.

Weight: 0.404 kg

What's in the box:
• EQ-001 wireless headphones
• micro USB charging cable
• interchangeable ear pads (orange, yellow and black)
• two-year WE ARE REWIND warranty

Over-ear DJ headphones

Prime sound quality
Hear your tracks loud and clear in the booth and on the move with the HDJ-X5. By taking on board feedback from DJs and analysing many different styles of monitoring, we’ve made sure our new DJ headphone range includes all the features needed for performing at every level. Thanks to the high-quality audio design inherited from our previous professional DJ headphones, you can enjoy distortion-free monitoring, even at high volumes, wherever you go.

The HDJ-X headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
With a new 40-mm driver, hear your tracks loud and clear. The 4-core twisted-structure cable gives superior left and right channel separation and the magnetic circuit is optimised so, thanks to fine noise suppression and elaborate tuning, you can enjoy distortion-free sound.

Rigorously tested
Take the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.
*MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Excellent portability
A compact carry pouch fits snugly around your folded headphones to save space in your luggage and reduce the risk of damage on the road.

Various accessories included
The HDJ-X5 comes with a 1.2 m short coiled cable and an L-type mini-jack, preventing any accidental disconnection during performances.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)

Accessories:
• HDJ-X5
• 1.2 m Coiled cable (extended length 1.8 m)
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 32 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 269 g
• Frequency Range: 5 - 30000 Hz

DJ On-Ear Headphones

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), Instruction Manual

Specifications
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 215 g
• Frequency Range: 5 - 30000 Hz

Mix instinctively with pro-grade features
The DJM-250MK2 has inherited some of the professional features of the popular DJM-900NXS2, such as the Magvel crossfader and Sound Color FX filter. Straightforward controls, a clear layout, and dedicated 3-band isolators let you scratch and mix instinctively.

The dithering technology on this mixer results in warm, high-quality audio from both analogue and digital sources. Plus its built-in sound card lets you connect the mixer to your PC/Mac and use rekordbox to perform with CDJs. Or hook up the DJM-250MK2 to turntables and use rekordbox in combination with our control vinyl to scratch and mix with digital files stored on your computer.

KEY FEATURES

Clear Layout & Magvel faders
The clear layout of the DJM-250MK2’s lower half gives you freedom to perform complicated scratch techniques. Our robust Magvel Faders ensure smooth control over long-term use. 2 metal shafts support the fader knobs, while the contact-free magnetic system is designed to endure millions of movements.

Smooth Mixing
Precise, fluid mixes are a breeze using the mixer’s channel faders, and the 3-band isolators give precision across the highs, mids and lows. You can use them to totally eliminate each frequency range when you turn the knob all the way to the left.

Flagship Filter FX
Each channel comes with its own dedicated Sound Colour FX filter, a feature inherited from the DJM-900NXS2 mixer. Simply turn the knob on each channel to apply the filter, Twist the parameter knob for texture, playing with resonance and tension.

Built in USB Sound Card
Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer’s hard drive.

Performance features
Unlock rekordbox performance features by simply connecting the unit to your PC/Mac. And, if you subscribe to the Creative plan, use Cloud Library Sync for seamless library management across multiple devices, and easily make custom versions of tracks in Edit mode.

DVS control
Make full use of rekordbox's low-latency DVS control for intuitive, smooth scratching.

High-quality sound
Whether you’re playing from digital or analogue sound sources, a warm, high-quality sound is created by the 64-bit digital signal processor using dithering technology.

Two headphone outputs
The DJM-250MK2 lets you plug both an ¼-inch stereo jack and 3.5-mm mini jack. Pick your size or attach 2 headphones when playing back-to-back.

Independent MIC section
Use a microphone and the AUX input at the same time.

Flexible connectivity
The XLR terminal and RCAs deliver premium sound quality on all connections. And the signal GND terminal easily attaches ground wires from analogue turntables.

TRAKTOR DVS control
This mixer supports DVS control of Native Instruments’ TRAKTOR PRO 3 DJ software. Plug your PC/Mac into this unit and use the TRAKTOR SCRATCH control media (control vinyl or CDs) to intuitively control and scratch with digital audio files stored on your computer.
Find out more about the Pioneer DJ Certified program.

Firmware Update Manager
You’ll be automatically notified when firmware updates become available. You can download the Firmware Update Manager.

SPECIFICATIONS

Main Features:
DVS Control:
• rekordbox

Accessories:
• DJM-250MK2
• Power cord
• AC adaptor
• USB cable
• Operating Instructions (Quick Start Guide)
• Warranty

Specifications:
• Width: 230 mm
• Height: 108 mm
• Depth: 320 mm
• Sampling Rate: 48 kHz
• A/D Converter: 24 bit
• D/A Converter: 24 bit
• Power Supply: AC adaptor (DC 12 V)
• S/N Ratio Line: 94 dB
• Frequency Range: 20 - 20000 Hz
• Distortion: < 0.005 % (LINE)

Channels:
• EQ/ISO: 3 band
• EQ/ISO Range: -∞ ~ +6 dB

Performance Control
• Channels: 2
• Sound Colour FX: Filter

Terminals:
Inputs:
• 3 LINE (RCA)
• 2 PHONO (RCA)
• 1 MIC (1/4 inch TS Jack)
Outputs:
• 1 MASTER (XLR)
• 1 MASTER (RCA)
• 2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)
USB:
• 1 USB B port

New motor, developed exclusively for direct-drive turntables

The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.

Knife-edge, pivot-point tonearm bearings

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).

Precision anti-skating and stylus-pressure adjustment

As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.

Pre-installed Oyster cartridge by SUMIKO

The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.

Built-in PHONO EQ amplifier supporting MM cartridges

The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.

Die-cast aluminium platter

In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.

Insulating feet with excellent shock absorption

The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.

2-speed turntable for 33-⅓ and 45 rpm

The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Features at a glance:
• Direct-drive analog turntable
• Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
• Die-cast aluminium platter
• Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
• Multi-layer piano black or natural walnut veneer finish
• Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
• Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
• 2-speed drive offering 33-⅓ and 45 rpm
• Gold-plated oxidation-resistant output connectors
• Oyster MM cartridge by SUMIKO
• Shock-absorbing insulating feet
• GND terminal
• RoHS compliant
• Included Accessories
• Felt Mat
• EP Adapter
• Counter Weight
• Head-shell (SUMIKO Oyster installed)
• Platter
• Dust Cover
• Hinges × 2
• RCA Audio cable with GND terminal
• AC Adapter (GPE036W-24015)
• Owner's Manual (including Warranty Card)

TURNTABLE FEATURES
• Type: Manual
• Drive method: Direct-drive
• Speed: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1%
• Built-in preamp: Yes
• S/N ratio: 67dB
• Cartridge: SUMIKO Oyster
• Cartridge type: MM
• Cartridge output: 4.0mV (1kHz)
• Tracking force: 2.3g
• Cartridge weight: 5.3g
• Including headshell: 15.3g
• Rec. cartridge weight: 4-13g
• Rec. cartridge weight (incl. headshell): 14-23g

AUDIO OUTPUTS
• Output level & impedance phono (MM): 4.0mV (1kHz)
• RCA: 1
• Output level & impedance RCA: 224mV (–13dBV)

ENERGY MANAGEMENT
• Power consumption (standby): 0.5W
• Power consumption: 2W
• AC adapter power
- Input: AC 100 V – AC 240 V, 50/60 Hz
- Output: DC 24 V, 1500 mA

DIMENSIONS AND WEIGHT
• Product height: 11.7cm
• Product width: 42cm
• Product length: 35.6cm
• Product weight: 6.1kg
• Packsize height: 24cm
• Packsize width: 52.5cm
• Packsize length: 43.8cm

AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf

Despite the tight tolerances of the hole in the center of the vinyl,

(0.286'' +0.001'' / -0.002''),

it sometimes happens that the hole is less than 0.284'' min.

In solution to this problem, we offer you our reamer

STABLE 33.33

Completely redesigned to allow you better control when correcting the diameter in the center of your vinyl, this small tool is very

simple to use.

You can now easily correct this small deviation of the diameter in the center of your vinyls which were too tight to put on your turntable.

Video: https://youtu.be/b8l5BRlgSHM

FIRST-CLASS DJ MIXER
The RMX-60 Digital is a first-class mixer for any DJ application. With its extensive range of connection options, robust construction and fully-digital audio architecture; Reloop’s latest mixer takes the classic 4+1 channel mixer design and updates it to suit modern performance standards. Whether you’re using CD players, Turntables, DJ controllers or DVS systems – the RMX-60 Digital’s 11 input and 6 output options bring true versatility into the DJ booth.

ADJUSTABLE LINE- AND CROSSFADER CURVES
To suit different mixing and scratching styles the RMX-60 Digital’s line- and crossfader-curves are adjustable, and there’s also a linefader start function. The crossfader is freely assignable between all channels, and the stock fader can also be switched for the new RMX Innofader by Audio Innovate, which is specifically designed for Reloop mixers to offer a gentle, gliding performance.

ACTIVE DUCKING TECHNOLOGY
The RMX-60 Digital is a true all-round club mixer. Neat finishing touches such as the “Active Ducking Technology” for the mic channel, and the future-proof firmware system that can be retro-updated by connecting to a computer, elevate this to a mixer that can support any type of DJ for years to come.

FEATURES
• Classic 4+1 channel performance club mixer
• 11 inputs, 6 outputs
• Fully digital architecture for outstanding sound and flexibility
• 8 high-quality performance effects in studio quality (flanger, delay, echo, reverb, gate, pitch shift, phase, bit crusher, noise)
• Large, clearly arranged parameter display
• Bipolar filter per channel
• Adjustable EQ characteristics (kill & classic)
• InnoFader compatible (RMX InnoFader available separately)
• Crossfader assign switch per channel
• Mic channel with 2-band EQ & talkover ''Active Ducking Technology'' for mic channel
• 2 headphones outputs (jack and mini jack)
• Intelligent 1-knob equalizer and mono/stereo switch for headphones
• Future-proof due to innovative, updateable firmware system (USB service port)
• Fader & crossfader-start and curve adjust
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs

TECHNICAL DATA
• Inputs: 2 Phono, 7 Line, 1 Combo-Mic
• Outputs: 1 XLR, 1 Jack, 2 RCA, 2 headphones
• Frequency range: 20 Hz - 20 kHz
• EQ range classic: +12 dB / -8 dB
• EQ range isolator: +12 dB / -26 dB (Total Kill)
• Dimensions: 320 x 107.5 x 386.7 mm
• Weight: 6.8 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/2/232553_Reloop_IM.pdf

The CTRL CASE MASCHINE is specially designed to hold the new NI Maschine+, Jam or MK2. Crafted from durable and lightweight Durashock molded EVA foam and a water-rejecting polyester exterior, it is furthermore equipped with a removable (velcro) foam that provides extra protection for all encoders, knobs and buttons.

FITS:

• NI Maschine Jam
• NI Maschine+
• NI Maschine MK2
• NI Maschine

BASICS:

• Lightweight Durashock molded 5 mm EVA foam and polyester exterior shell
• Incl. high density egg foam to protect control knobs, faders and jog wheels
• Sturdy zipper and carrying handle
• Fits including Decksaver® cover
• Compact size fits in any MAGMA bag

SPECS:

• Outer measures: 37 x 34,5 x 8 cm
• Inner measures: 33,5 x 31 x 4 cm
• Weight: 0,7 kg
• Color: black/black (Item-No.: 48004 / EAN-Code: 4041212480040)

The Headliner Gigastsand USB+ is a fully adjustable laptop stand with integrated high-speed USB hub. Designed for DJ’s, Musicians, Performers, and Creators, this 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

The Gigastand USB+ is constructed of steel and aluminum for the ultimate combination of portability and durability. It is fully adjustable, configurable in C or Z positions, and folds flat thanks to an intuitive ratchet lever system. Easily loosen and tighten each joint to find the right angle for your setup. The telescoping neck rotates 360˚ and has a max height of 16”.

The integrated USB hub features two USB-C ports and two USB-A ports to connect controllers, interfaces, hard drive, and more, and one USB-C port for computer connection. It is fully USB powered so it does not require carrying around an additional power supply.

Carrying pouch and USB-C cable included.

Highlights:
• Fully adjustable DJ laptop stand, configurable in C or Z positions and folds flat thanks to an intuitive ratchet lever system.
• Constructed of steel and aluminum for the ultimate combination of portability and durability.
• Telescoping neck rotates 360˚ and has a max height of 16”.
• Integrated USB hub features two USB-C ports and two USB-A ports to connect peripherals, and one USB-C port for computer connection.
• 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

Features:
• Fully-adjustable laptop stand with integrated USB hub
• (2) USB-C ports and (2) USB-A ports to connect peripherals, and (1) USB-C port for computer connection
• Ideal for storing and traveling with compact folding design and included carrying pouch
• Rugged construction of steel and aluminum for the ultimate combination of portability and durability.
• Ratchet lever system makes it a breeze to find the perfect position for the stand. Easily loosen and tighten each joint to find the right angle for your setup.
• Fully adjustable tray and feet up to +/- 90%
• Telescoping neck with 360˚ rotation and max height of 16”
• Configurable in C or Z positions to fit into most workspaces
• Also fits small controllers, samplers, drum machines, and more
• Fits laptops up to 17″
• Includes USB-C cable and pouch

Dimensions:
• Tray (WxD): 250mm x 232mm / 9.8” x 9.1”
• Legs (WxD): 250mm x 296mm / 9.8” x 11.6”

Kilburn II offers 20+ hours of portable playtime on a single charge and utilises True Stereophonic, a unique form of multi-directional sound from Marshall. This stout-hearted hero weighs only 2.5 kg and is the loudest speaker in its class. Kilburn II has a solid metal grille and a guitar-inspired carrying strap for easy portability.

KILBURN II KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Water-resistant (IPX2)
• Carrying strap

MARSHALL SIGNATURE SOUND
As the loudest speaker in its class, Kilburn II produces a clear midrange, deep bass and extended highs. Its top panel features analogue control knobs for bass, treble and volume, allowing you to fine-tune to the exact sound you desire.

TRUE STEREOPHONIC (360° SOUND)
This stout-hearted hero utilises True Stereophonic, a unique form of multi-directional sound from Marshall. Experience absolute 360° sound where every spot is a sweet spot. Powered by 36 watts, its pronounced and articulate sound pushes the boundaries for a speaker of this size.

ICONIC & RUGGED DESIGN
Kilburn II features flush-mounted corner caps and a water-resistant design that make it supremely rugged and durable, perfect for whatever adventure comes your way. It is encased in vinyl and features a solid metal grille and the iconic Marshall script.

20+ HOURS OF PORTABLE PLAYTIME
Kilburn II weighs just 2.5 kg and offers 20+ hours of portable playtime on a single charge. You can track the speaker’s battery life with the visual battery indicator located on the top panel of the speaker.

WATER-RESISTANT (IPX2)
The road is full of surprises, which is why Kilburn II offers a water-resistant design. Its IPX2 rating means it’s able to withstand a little water.

CARRYING STRAP
Its compact size and guitar inspired carrying strap make Kilburn II perfect to take with you.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IPX2
• DIMENSIONS: 243 X 162 X 140 MM / 9.57 X 6.42 X 5.51 IN

The excellent Dr. Suzuki Slipmats are now available in red!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Welcome to the new era of DJing - control djay on your iPhone, iPad, or Mac with professional turntables and mixers. You can now take the stage - anywhere, anytime - using your ultra portable iOS device as the brains of the DJ booth.

Hardware Setup
Plug-and-Play DVS for your iOS device
You can now connect your iOS device directly to your mixing system. The optimized user interface automatically adapts when DJ hardware is connected.

djay Control Vinyl
The next generation of DVS technology
Algoriddim has partnered with the world leading DJ manufacturers to develop a wide range of premium DJ controllers, DJ mixers, and accessories, co-branded and designed to seamlessly integrate with Algoriddim’s award-winning DJ apps.

This feature is powered by an enhanced DVS control tone exclusive to djay Pro AI which has a unique control data stream imprinted into the grooves of each of the three distinct sections of the vinyl. This drives the patented Neural MixTM technology running on Mac, iPad, or iPhone, using cutting-edge artificial intelligence to separate any song into its original components in real-time.

Mobile & Desktop
Mac. iPad. iPhone. DVS without compromises.
We’ve worked closely with some of the world’s top DJs and carefully adapted djay’s user interface to perfectly complement any connected hardware. It’s a unique blend of tactile and touch based control. Moreover, djay’s audio engine has been fine tuned for digital vinyl control to offer the tightest scratching, most accurate time-stretching, and lowest latency possible - no matter if you’re using your Mac, iPad, or iPhone.

DVS FAQs
What you need to know
What do I need in order to use DVS with djay?
DVS in djay is supported with any compatible mixer, turntable, and djay Control Vinyl (see below). Depending on which device you are using djay on, you might need one of the following adapters in order to connect your mixer:

iPad or Mac with USB-C port: USB-C to USB Adapter
iPad or iPhone with Lightning port: Lightning to USB 3 Camera Adapter
Which mixers are supported?
djay supports any audio interface, mixer, and MIDI controller that is supported on the respective platform. In addition, many of the most popular DVS-compatible mixers have been pre-mapped and can be used plug-and-play with djay and DVS.

➡ List of pre-mapped DVS-compatible mixers

Which DVS timecode djay Control Vinyl is supported?
In addition to the official djay Control Vinyl (see above), djay also supports standard timecode DVS systems that use a control tone of 1kHz (which the vast majority of DVS systems do).

Where can I get the official djay Control Vinyl?
Head over to our vinyl partner STOKYO’s website to order your djay Control Vinyl today! The vinyl are available as a single option or as a pair, and are in stock now.

Which versions of djay support DVS?
DVS is supported in the latest versions of djay on Mac, iPad, and iPhone (version 4.0 or later).

Video: https://www.youtube.com/watch?v=gUXWGZFvBZs

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

As the most compact speaker in the home line-up, Acton III fits in anywhere, with sound that really stands out. Easily connect to your speaker from your device using Bluetooth or the 3.5 mm input and get straight to listening. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume.

ACTON III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation in the home lineup features an even wider acoustic footprint than before, with Marshall's characteristic surround sound that has been redesigned to give you a more immersive experience. Generation III speakers carry outward-angled treble and updated waveguides to deliver solid sound that's so wide it reaches anywhere in the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 30 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 260 X 170 X 150 MM / 10.24 X 6.69 X 5.91 IN

Here comes the add-on to our latest concrete turntable collaboration between HHV and BETONAT: the 100% Concrete Vinyl Stand. With a simple and straightforward design featuring clear shapes, this stand celebrates the fusion of urbanism, music, and subculture.

Handcrafted from 100% concrete, this vinyl stand is aesthetically pleasing and its minimalistic design complements any modern living space.

Whether you’re a collector or just starting out, the Vinyl Display Stand is the perfect way to show your favorite records.

Original HHV × BETONAT Vinyl Display Stand
Suitable for 7″ vinyl singles & 12″ vinyl LP, not for double LP
118 mm length x 48 mm height x 60 mm width
0.55 kg pure concrete
100% handmade in Berlin Neukölln
Beautiful gift box

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Cream-coloured through-dyed and not printed paper inner sleeve for storing 12 inch records. This inner sleeve is unlined. Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 30.5 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 12" Vinyl LP Innenhüllen (unlined) with angled corner cut - specific details:

• measures: 301/304 x 309 mm
• material: 70 g/m² cream-coloured premium paper
• made of unbleached pulp, ash- and acid-free, contains no recycled content and develops virtually no dust even when frequently inserting and removing the record
• die-cut diameter: 80 mm centered
• with lengthened rear lip to facilitate opening
• Made in Germany
• selling unit: 50 pieces

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

Every once and a while you need to take care of your record player. This is the NP5 diamond stylus replacement needle which is compatible for these record player:
• Mercury
• C62 Black
• T150
• C6 White

Specifications:
• ABS Plastic Composition
• Diamond Stylus Needle
• Plays 3 Speeds (33 1/3, 45 and 78 RPM)

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Intuitive Smart Features and Elegant Design

Compact yet powerful 6mm drivers and a special acoustic structure with active noise cancellation deliver clear sound wirelessly — wherever your busy day takes you. Seamless device switching and crisp call clarity in a comfortable design – you won't miss a beat.

Elegant & All-Day Comfort Design
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.
Low-profile design for comfort throughout the day, and balanced to stay put – even when you're on the go.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Clear and detailed sound delivered wirelessly through the unique acoustic chamber, harmoniser, and compact 6mm drivers. Compatible with LDAC™ high-res wireless audio.*
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Sound Clarity
Enjoy pure sound. The Feed Forward Mic captures environmental sound and Digital Processing removes noise in addition to Passive Noise cancelling with the earplug effect.

Never miss a beat.

Intuitive Smart Features

Beamforming Technology
Clear calls using Beamforming Technology to capture and transmit your voice clearly despite surrounding noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 5.5 hours* playback with ANC on, 18 hours back-up with the case. Quick charge for 15 minutes will give you 60 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Clear rich sound from a unique acoustic chamber, harmonizer, and 6mm drivers.
• Pure Sound from Active Noise Cancelling with a Feed Forward Mic.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• Clear calls using Beamforming Technology to capture and transmit your voice.

Technical Data:
GENERAL
• Driver Unit (mm): 6 mm (1/4 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 3.5 hours (NC ON)
- Approx. 4.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 12 hours (NC ON)
- Approx. 14 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 5.5 hours (NC ON)
- Approx. 7.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 18 hours (NC ON)
- Approx. 24 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: -
- Earphones with Charging case / USB: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: -

• Quick Charge (15 minutes, AAC)
Earphones:
- Approx. 60 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9.5 hours (NC ON),
- Approx. 20 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 22 mm x 26 mm x 24 mm
- Approx. 7/8 inch x 1 inch x 15/16 inch
Charging case:
- Approx. 68 mm x 33 mm x 28 mm
- Approx. 2-11/16 inch x 1-5/16 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 5 g (0.18 oz)
- Charging case: Approx. 35 g (1.2 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS, S, M, L (M attached)

Advanced Function
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes(Feed-Forward only)