DJ Equipment 368 Items

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Stylus for Goldring G1006 Cartridge

Just needle, not the complete cartridge included!

Goldring E1

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E1 cartridge, the first in the range, utilises a carbon-fibre reinforced cantilever and bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Red
• Cantilever: Carbon
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Stylus for Goldring E1 MM Cartridge

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Stylus for Goldring E2 MM Cartridge

Goldring E3

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Violet
• Cantilever: Aluminium
• Stylus profile: Elliptical
• Stylus radius: 0.3 x 0.7 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Stylus for Goldring E3 MM Cartridge

Just needle, not the complete cartridge included!

The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Reduced Moving Mass
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.

Expert Adjustment
The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Specifications:
• Frequency Response: 20 Hz -20 kHz ±3 dB
• Channel Balance: within 2 dB @ 1 kHz
• Channel Separation: better than 25 dB @ 1 kHz
• Sensitivity: 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec
• Static Compliance: 24 mm/N (lat); 16 mm/N (vert)
• Equivalent tip mass: 0.45 mg
• Vertical Tracking Angle: 24°
• Stylus Radius: Elliptical
• Stylus Type: Replaceable
• Load Resistance: 47 kΩ
• Load Capacitance: 150-200 pF
• Internal Inductance: 570 mH
• Internal Resistance: 660 Ω
• Cartridge Mass: 6.3 g
• Cartridge Mass (inc. fixings): 7.6 g
• Fixing Centre: 0.5" (12.7 mm)
• Playing Weight: 1.5 - 2.0 g (1.7 g nom.)
• Replacement Stylus: 1006 - D0

Combining the company’s century-old legacy with modern-day convenience, GR3 represents Goldring’s stylish re-entry into the turntable arena.

Developed in collaboration with a renowned British hi-fi manufacturer, GR3 is equipped with the multiple award-winning Goldring E3 moving magnet cartridge, offering true plug-and-play functionality. Its built-in phono pre-amplifier allows seamless compatibility with any amplifier or powered speaker, while designed to maximise the flywheel effect, its Phenolic resin platter ensures consistent rotational speed for enhanced audio fidelity.

Additionally, GR3 comes with a choice of high-quality interconnects from Goldring’s world-renowned sister brand QED, ensuring a vigorous connection and sound quality.

Key features at a glance:
• Pre-fitted with a Goldring E3 moving magnet cartridge: This serial award-winning cartridge comes pre-installed and perfectly aligned on the GR3 tonearm, offering a balanced, refined and dynamic sonic performance.
• Built-in phono stage : For maximum convenience, GR3’s integrated pre-amplifier enables effortless connections to any amplifier or powered speaker of choice.
• Phenolic resin platter: Designed to maximise the flywheel effect, the platter ensures consistent rotational speed for enhanced audio fidelity.
• Choice of QED interconnects: Goldring provides a choice of either a 1.5 m phono-to-phono or a 3 m phono-to-3.5 mm cable from QED, one of the most respected names in audio interconnects and cables, ensuring optimal connection and sound quality.
• Elegant design: GR3 pairs premium performance with a high-gloss black plinth and perspex dust cover, offering a sophisticated aesthetic that matches its superior sound.

Pre-fitted Goldring E3 moving magnet cartridge
Goldring’s E3 cartridge is considered one of the best performers at its price point – just see the six consecutive What Hi-Fi? best buy awards for proof. Combining plug-and-play simplicity with uncompromised audio performance, the E3 arrives pre-fitted and pre-adjusted to the GR3 tonearm.

It features a stiff and lightweight aluminium cantilever offering accurate tracking, more detail and reduced distortion, while a 'dual magnet' generator ensures authentic reproduction, better channel separation and a more musical soundstage. Designed and engineered in the UK, micro-adjustments during production ensures a consistent and reassuring performance for the life of the product.

Built-in phono stage
Not every amplifier or powered speaker has the necessary gain and EQ to deal with the signal from a turntable. So, to make life easier, GR3 boasts an integrated phono pre-amplifier in order to do this job. It means this single turntable that can happily connect to any amplifier or powered speaker you decide to use without the need for extra phono amplification or boxes. Combine it easily with Q Acoustics M20 or M40 powered speakers for a user-friendly and musically powerful vinyl system.

Phenolic resin platter
The remarkable speed stability of the GR3 is maintained by employing a phenolic resin platter with an enhanced fly-wheel effect. By distributing the majority of its considerable mass at the outside of rotation, inertia is increased and therefore speed variations are suppressed. This gives the GR3 a very good wow and flutter performance which in turn ensures that the fidelity of its musical reproduction remains high.

Choice of QED interconnects
Goldring’s sister company, QED, is one of the most credible and highly regarded manufacturers of analogue and digital interconnects in the world - so choosing either a 1.5 m phono-to-phono or 3 m phono-to-3.5 mm cable to plug GR3 into a compatible amplifier or powered speakers, ensures a stable and robust connection.

Elegant design
To complement the GR3’s class-leading performance, a combination of a stylish high-gloss black plinth, covered by a perspex dust cover delivers a premium and sophisticated design that can match perfectly with any system or fit seamlessly into any interior design space.

Specifications:
• Tonearm: Hand assembled and carefully matched tonearm
• Cartridge: Factory-fitted Goldring E3 moving magnet cartridge
• Motor: 24 Volt low noise, low vibration motor
• Plinth: Gloss Black finish with Goldring gold branding
• Platter: Phenolic resin with flywheel mass on the rim
• Phono amp RIAA accuracy: (100 Hz to 20 kHz) ±0.4 dB, typically better than ±0.25 dB
• Dimensions (lid closed) (W x H x D): 450 x 120 x 360 mm
• Weight (unpacked): 5.5 kg

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Akai Pro APC64
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Akai Pro MPC One+ and MPC One
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand
• Fits Elektron Analog Heat, Analog Heat MKII, Analog Heat +FX, Digitakt, Digitakt II, Digitone, Syntakt
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your NI Maschine Mikro MK3
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Polyend Tracker, Tracker+, Play, or Play+
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Roland TR-8S
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

The Headliner Gigastsand USB+ is a fully adjustable laptop stand with integrated high-speed USB hub. Designed for DJ’s, Musicians, Performers, and Creators, this 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

The Gigastand USB+ is constructed of steel and aluminum for the ultimate combination of portability and durability. It is fully adjustable, configurable in C or Z positions, and folds flat thanks to an intuitive ratchet lever system. Easily loosen and tighten each joint to find the right angle for your setup. The telescoping neck rotates 360˚ and has a max height of 16”.

The integrated USB hub features two USB-C ports and two USB-A ports to connect controllers, interfaces, hard drive, and more, and one USB-C port for computer connection. It is fully USB powered so it does not require carrying around an additional power supply.

Carrying pouch and USB-C cable included.

Highlights:
• Fully adjustable DJ laptop stand, configurable in C or Z positions and folds flat thanks to an intuitive ratchet lever system.
• Constructed of steel and aluminum for the ultimate combination of portability and durability.
• Telescoping neck rotates 360˚ and has a max height of 16”.
• Integrated USB hub features two USB-C ports and two USB-A ports to connect peripherals, and one USB-C port for computer connection.
• 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

Features:
• Fully-adjustable laptop stand with integrated USB hub
• (2) USB-C ports and (2) USB-A ports to connect peripherals, and (1) USB-C port for computer connection
• Ideal for storing and traveling with compact folding design and included carrying pouch
• Rugged construction of steel and aluminum for the ultimate combination of portability and durability.
• Ratchet lever system makes it a breeze to find the perfect position for the stand. Easily loosen and tighten each joint to find the right angle for your setup.
• Fully adjustable tray and feet up to +/- 90%
• Telescoping neck with 360˚ rotation and max height of 16”
• Configurable in C or Z positions to fit into most workspaces
• Also fits small controllers, samplers, drum machines, and more
• Fits laptops up to 17″
• Includes USB-C cable and pouch

Dimensions:
• Tray (WxD): 250mm x 232mm / 9.8” x 9.1”
• Legs (WxD): 250mm x 296mm / 9.8” x 11.6”

Introducing the Headliner R4, a 4-channel analog rotary mixer designed to elevate your DJ experience. Continuing the tradition of precision, warmth, and affordability, the R4 is packed with enhanced features and top-notch components, including genuine ALPS potentiometers, ensuring an unparalleled mixing experience.

Crafted with four Line inputs, three Phono inputs, and one Mic input on four stereo channels. Each channel boasts essential features like gain control with peak LED, a 3-band isolator EQ, headphone cue selector, generous channel volume knob, and a filter activation switch, granting DJs precise control over their sound.

At the heart of the R4 lies the Master channel, equipped with an analog filter, headphone monitoring, and a comprehensive output control section.

Seamlessly toggle between High Pass / Low Pass Filter modes with Frequency and Resonance controls to shape your signature sound.

Empowering DJs with absolute control, the headphone Cue control section offers headphone volume control, headphones mix control (Cue/Master), and a split monitor switch for smooth transitions between outputs.

Featuring independent Master and Booth outputs, both equipped with volume controls and balanced XLR and unbalanced RCA connectors, the R4 ensures seamless connectivity across various sound systems. Dual LED level meters for the Master output facilitate precise monitoring and adjustment of audio levels. Additionally, the mixer boasts a dedicated Record output with unbalanced RCA jacks, and an additional microphone input with level control located on the front panel.

Sporting genuine ALPS potentiometers, a robust metal enclosure, and stained wood side panels, the R4 exudes a classic aesthetic that complements any DJ setup. Its modular internal construction and an external power supply connected via a locking Mini XLR guarantee superior audio performance.

The Headliner R4 stands as a testament to precision and warmth in the DJ realm. Whether spinning house, techno, or the timeless funk/soul/disco beats, this versatile mixer elevates your setup, ensuring your mixes stand out with exceptional quality and control.

Highlights:
• 4 Channel analog rotary DJ mixer with built-in Filter.
• Analog High Pass / Low Pass filter with frequency and resonance controls to shape your signature sound.
• Four stereo channels featuring gain control with peak LED, 3-band isolator EQs, headphone cue selector, generous channel volume knob, and a filter activation switch, granting you precise control over your sound
• Four line inputs, three phono inputs, and two mic inputs connecting a wide variety of devices including turntables, media players, and microphones.
• Independent Master and Booth outputs equipped with volume controls, balanced XLR and unbalanced RCA connectors, ensures seamless connectivity across various sound systems.

Features:
• Three stereo channels with selectable Line and Phono RCA inputs and one channel with selectable stereo Line and mono Microphone.
• Each channel features Gain control with Peak LED, 3-Band Isolator EQ, Headphones Cue selector with LED, channel volume control and filter activation switch with LED.
• Master channel features analog filter, headphone monitoring and output control section.
• Analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls.
• Genuine ALPS potentiometers.
• Headphone Cue control section features headphones volume control, headphones mix control (Cue/Master), and split monitor switch.
• High current headphone amplifier with dual 1/4” and 1/8” jacks.
• Independent Master and Booth outputs with volume controls, balanced XLR outputs and unbalanced RCA outputs.
• Additional Record output with unbalanced RCA jacks.
• Dual LED level meters for the Master output.
• Microphone input with level control on front panel.
• Sturdy metal enclosure with stained wood side panels for a classic look
• Modular internal construction for superior audio performance.
• External split rail power supply connected via locking Mini XLR connector.
• Push-button power switch on rear panel.
• Measurements: 12.6” x 12.2” x 4.2” (320 x 310 x 106 mm)
• Weight: 7.7lbs (3.5Kg)

Specifications:
Microphone Inputs
• Nominal Input Level: -50dBu
• Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
• THD + N: < 0.1%
• Input Impedance: 1.2 kOhm

Line Inputs
• Nominal Input Level: -10dBV (-7.8dBu)
• Gain Range: -12dB to +12dB
• Frequency Response: 20Hz – 20kHz (+0/- 0.5dB)
• THD + N: < 0.05%
• Input Impedance: 10 kOhm

Phono Inputs
• Nominal Input Level: -40dBu (@1kHz)
• Gain Range: -12dB to +12dB
• Active RIAA equalization
• THD + N: < 0.05%
• Input Impedance: 47 kOhm
• Input capacitance: 100pF
• Single stage Phono Preamp
• Ceramic capacitors

Main Outputs
• Nominal Output Levels, balanced: +4dBu
• Maximum Output Level, balanced: +20dBu
• Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
• Maximum Output Level, unbalanced: +12dBu
• Frequency Response: 20Hz-20kHz (+0/-1.5dB)
• Residual noise: <-86dBu (Line to Master)(A-Weighted)
• Dynamic Range: > 100dB (A-Weighted)
• Crosstalk: < -65dB
• THD + N: < 0.05%

Headphone Output
• Maximum Output Level: 70mA/channel into 150Ω
• Minimum Load Impedance: 32 Ohms/channel

Power Supply
• Type: External with locking mini-XLR connector
• Input Voltage: 100-240v ~ 50/60Hz
• Output Voltage: +/-15V; 500mA

Here comes the add-on to our latest concrete turntable collaboration between HHV and BETONAT: the 100% Concrete Vinyl Stand. With a simple and straightforward design featuring clear shapes, this stand celebrates the fusion of urbanism, music, and subculture.

Handcrafted from 100% concrete, this vinyl stand is aesthetically pleasing and its minimalistic design complements any modern living space.

Whether you’re a collector or just starting out, the Vinyl Display Stand is the perfect way to show your favorite records.

Original HHV × BETONAT Vinyl Display Stand
Suitable for 7″ vinyl singles & 12″ vinyl LP, not for double LP
118 mm length x 48 mm height x 60 mm width
0.55 kg pure concrete
100% handmade in Berlin Neukölln
Beautiful gift box

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

Contactless Fader by Jesse Dean for your Reloop SPIN turntable.

The JDDX2R-SP is the same design built of the legendary JDDX2RS-A - with extra capability!

No need to take out and calibrate each time - calibrate from the top!

It’s dual rail slide contactless element gives it durability for an aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors and circuitry. There is virtually no cleaning needed with this contactless element.

- Dual rail 45mm slider for stability and smooth action
- Magnetic sensor contactless circuitry
- Two side cut-in adjustment
- Switchable from double cut to 2 channel capability
- FR4 fiberglass PCB faceplates
- Full size fader cap by Cooler Caps!
- 30 second easy installation
- Comes with cut adjuster screw driver

JDDX2R-SP calibration instructions: http://www.zendell.uk/LINKS/JDDX2RS-A_calibration.pdf

JDDX2R-SP double cut instructions: http://www.zendell.uk/LINKS/JDDX2R-SP.pdf

An upgraded replacement platter belt for the Reloop SPIN portable turntable.

Thicker than the stock belt
Wider than the stock belt
Better grip and torque
Compatible with Vestax Handy Trax

Carbon Fibre Handle for your PT01.

3K weave glossy carbon fiber tube handle that can be easily installed into your Numark PT01 turntable range.

- Real carbon fiber

- No drilling required

- Easy install

Need more control with your Reloop SPiN when trying to balance vinyl and audio levels?

When using a third party fader for your SPiN - get the most from your redundant stock fader!

Simply plug the OEM RSVCB inline with the stock fader and configure the switch settings accordingly!

•Easy installation
•No soldering
•Switch between Vinyl, Aux or Crossfade
•Vinyl volume control - default

- Disco-Antistat Ultrasonic - now with NEW features!

Automatic ultrasonic record washing machine

Disco-Antistat Ultrasonic - The most thorough way to wash records!
Our record washing machine Disco-Antistat Ultrasonic combines over 45 years of experience in the care and cleaning of records with highly developed, state-of-the-art cleaning technology.

The combination of ultrasonic cleaning and our proven goat hair brush system ensures gentle, groove-deep cleaning of your records and an audible improvement in the sound image.

During operation, the cleaning fluid is permanently clarified by a filter system and dirt particles are filtered out to minimise impurities in the fluid and thus achieve the best possible cleaning result.
With our special cleaner, the record is treated antistatically and thus permanently prevented from renewed soiling by adhering dust.
Our washer is ready for use in just a few steps and the intuitive operation ensures optimal results from the very first record!

• The cleaning time can be conveniently adjusted to the level of soiling of the record, supported by a functional display. Possible cleaning time is between 1-5 minutes and can be set in steps of 10 seconds.
• A well visible progress indicator informs about the status of the cleaning at a glance. (1 LED = 10% of the set cleaning time).
• After use, the filtered cleaning fluid can be conveniently refilled into the bottle by pressing a button via the new solenoid valve.
• The permanent filtering of the liquid prevents it from accumulating coarse dirt particles. This ensures a consistent cleaning result.
• The aluminium-glass filter can be easily removed and reinstalled for cleaning.
• Inserting and removing the record is quick and easy thanks to the innovative magnetic coupling.
• Driven by a Bosch electric motor, the record rotates evenly in the new fibreglass-reinforced tub, achieving a homogeneous treatment with ultrasound (46kHz.).

Disco-Antistat Ultrasonic
Cleanliness you can hear! A powerful ultrasonic transducer (46kHz.) generates with so-called cavitation bubbles that act directly on the dirt and remove it gently and effectively.
The ultrasonic waves also reach places that are inaccessible to conventional cleaning methods and ensure cleanliness down to the depth of the groove.
The loosened dirt particles are then brushed off with the soft goat hair brushes.

Scope of delivery:
• Ultrasonic record washer
• 200ml cleaning concentrate Disco-Antistat Ultraclean (1302000)
• 1 litre Disco-Antistat BiDest, high-purity water (1302001)
• 1 microfibre cloth
• Label cover incl. axle with magnetic coupling (1302010)
• Power supply 230 VAC / 12 VDC 3A
• 1 drying rack (1302499)
• 1 sponge brush 50ml
• 1 Mixing bottle (for preparing the cleaning liquid from Disco-Antistat Ultraclean and Disco-Antist BiDest)
• Replaceable aluminium/glass filter for cleaning (1225211)
• Operating manual in 8 languages
• Dimensions: 360mm x 180mm x 235mm (W x D x H)

Made in Germany!

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

PROS
•Modern turntable
•Bluetooth speaker connectivity
•Directly digitises vinyl to a storage medium
•Semi-automatic

PRODUCT INFORMATION
•The Lenco LBT-120BK Turntable is a semi-automatic record player with Bluetooth functionality. You can connect the record player to your Bluetooth speaker in seconds and enjoy a full and warm sound from the comfort of your couch. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your LP or single at the right speed.

•And what if you want to enjoy your favourite records while cycling or in the train? The Lenco LBT-120BK digitises all your favourite records via the built-in USB port. You can transfer the rec•ordings to a USB stick in next to no time and carry them with you in your pocket.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LBT-120BK turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tone arm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LBT-120BK is supplied with a dust cover that keeps your Lenco fresh and clean during brief periods when you are not using your turntable.

SPECIFICATIONS
•SKU: A002991
•Product height: 12.20 cm
•Product depth: 36.20 cm
•Product width: 42.20 cm
•Number of RCA outputs: 1
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902039822
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 12W

PROS
•Modern turntable
•Bluetooth
•33 or 45 RPM

PRODUCT INFORMATION
•The Lenco LBT-188 is a turntable with Bluetooth functionality. Connecting this turntable to your Bluetooth speaker is child’s play. The ideal set-up for enjoying a full and warm sound while lounging on your couch at home. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your vinyl record at the right speed.

•The LBT-188 from Lenco features a metal turntable, belt drive, an RCA connection and a tone arm with a counterweight. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it against knocks. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003117
•Product height: 12.40 cm
•Product depth: 34.40 cm
•Product width: 41.70 cm
•Number of RCA outputs: 2
•12V car: Yes
•Power option: Power on/off switch
•USB connectors: USB A
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902041139
•Amplifier options: Includes (pre) amplifier
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 5 W

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes

PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W

PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Wood
•SKU: A003104
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040989
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

The new MAGMA 45 RECORD-BAG 50 holds up to 50 x 7-inch records and is perfect for shorter DJ-sets or record digging. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records.

FITS:
• 50 x 7” Vinyl-Singles
• 45 Adapters

BASICS:

• Constructed of water-resistant 1680D Polyester
• 1 thick cm EVA padding and integrated PVC walls for ultimate protection
• Strong zipper
• Internal mesh pocket for 45 adapter storage
• Convenient carrying-handle and ergonomic shoulder-strap
• Fits inside most backpacks

SPECS:

• Outer measures: 21 x 21 x 12,5 cm
• Inner measures: 18,5 x 18,5 x 11 cm
• Weight: 0,7 kg

45 Adapter not included.

45 SANDWICH Record-Bag

Designed for dedictated 45 vinyl-DJs, the all-new MAGMA 45 SANDWICH offers a remarkably sleek and lightweight innovation for carrying your 7“ records.

Constructed with a fully molded, shock-absorbing EVA shell, this case ensures superior protection and a secure fit for up to 150 7“ records.

The unique 50/50 "Sandwich" style enables the lid to serve as a second storage section, making organizing and flipping through your 45s more convenient. Tailored for seasoned 45 collectors on the move, the 45 SANDWICH seamlessly combines style and functionality, ensuring a solid and efficient travel companion for your musical treasures.

​Also available as strictly limited FUNKFREAKS and DUSTY DONUTS Edition!

FITS:
• 120-150 x 7“ records

BASICS:
• Compact and lightweight design
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting 1680D Polyester exterior shell
• Molded interior for additional protection
• 50/50 Sandwich style enables the lid to serve as a second storage section
• Sturdy zipper
• Embossed molded feet
• Including shoulder strap (with metal hook)
• Including trolley sling

SPECS:
• Outer dimensions (H/B/T): 38 x 22 x 24 cm
• Inner dimensions: 33 x 19,5 x 20 cm
• Weight: 1,1 kg

Introducing the CTRL CASE APC 64 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Akai APC 64 it is a very lightweight and convenient solution to carry the instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• AKAI APC 64

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 41 x 32 x 10 cm
• Inner measures: 37,5 x 28,5 x 9 cm
• Weight: 1,1 kg

Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• Ableton Push III
• Ableton Push I
• Ableton Push

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 43 x 37 x 10,5 cm
• Inner measures: 39 x 33 x 5 cm
• Weight: 1,3 kg

The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

• Pioneer DJM-V10
• Pioneer DJM-A9
• Pioneer DJM-900 NXS2
• Pioneer DJM-900 NXS / SRT
• Pioneer DJM-800 / 700 / 600
• Pioneer CDJ-3000
• Pioneer CDJ-2000 NXS2
• Pioneer CDJ-2000 NXS
• Pioneer CDJ-900 / 850 / 800
• Pioneer XDJ-1000
• Allen & Heath PX5
• Allen & Heath DB4
• Allen & Heath DB2
• Allen & Heath Xone 92 / 62 / 43C
• Denon LC 6000 Prime
• Denon SC-6000 / SC-6000M
• Denon SC-5000 / SC-5000M
• Denon X1850 / X1800
• Denon X1600
• Denon SC3900
• Denon SC2900
• Reloop RMX-90 DVS
• Reloop RMX-80 Digital
• Ecler Warm 4
• Ecler NUO4
• Rane MP2015
• Rane Sixty-Eight / Sixty-Four

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Solid aluminum profiles and spring loaded latches
• Additional foam to fit various mixer and CD-player models
• 3 removable front panel covers
• Convenient cable access ports
• Full padded interior
• Incl. recessed wheels for easy transportation

SPECS:

• Outer measures: 80 x 59 x 22,5 cm
• Inner measures: 33,1 x 42,5 x 8,4 cm (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
• Weight: 21,5 kg

As the most compact speaker in the home line-up, Acton III fits in anywhere, with sound that really stands out. Easily connect to your speaker from your device using Bluetooth or the 3.5 mm input and get straight to listening. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume.

ACTON III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation in the home lineup features an even wider acoustic footprint than before, with Marshall's characteristic surround sound that has been redesigned to give you a more immersive experience. Generation III speakers carry outward-angled treble and updated waveguides to deliver solid sound that's so wide it reaches anywhere in the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 30 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 260 X 170 X 150 MM / 10.24 X 6.69 X 5.91 IN

Emberton II produces a sound much larger than its size. Two 2’’ full range drivers and two passive radiators bring you the heavy Marshall sound you know and love. Experience absolute 360° sound with True Stereophonic, a unique form of multi-directional sound from Marshall. Weighing in at only 0.7 kg (1.5 lbs), this speaker is tough and resilient.

EMBERTON II KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 30+ hours of portable playtime
• Dust & waterproof (IP67)
• Multi-directional control knob

MARSHALL SIGNATURE SOUND
Emberton II delivers sound that is rich, clear and loud, like the artist intended. Two 2’’ full-range drivers and two passive radiators bring you the heavy Marshall sound you know and love. Its custom-tuned audio components enhance the multi-directional sound by providing brilliantly powerful and clear sound throughout the entire frequency range.

TRUE STEREOPHONIC (360° SOUND)
Experience absolute 360° sound with True Stereophonic, a unique form of multi-directional sound from Marshall – where every spot is a sweet spot. By separating out the spatial content of stereo recordings, Emberton II produces a sound much larger than its size.

ICONIC & RUGGED DESIGN
Boasting an extremely durable and easy-to-use design, Emberton II is a must for any occasion. The textured silicone sleeve arcs back to the classic vinyl that encased the original amplifiers. The signature details, such as the solid metal grille and iconic Marshall script, echo the legacy of rock ’n’ roll.

30+ HOURS OF PORTABLE PLAYTIME
Emberton II offers 30+ hours of portable playtime on a single charge. Its compact size, rugged durability and reliable playtime, make it perfect to take with you. When you’re out of battery, Emberton II won’t keep you waiting long – plug in your speaker and return to full battery in 3 hours.

DUST & WATERPROOF (IP67)
Emberton II is tough and resilient. It has an IP67 dust and waterproof rating so you can submerge Emberton II in 1 m (3 ft) of water for a period of up to 30 minutes. This is a speaker that won’t let rain or dirt get in the way of your music.

MULTI-DIRECTIONAL CONTROL KNOB
Emberton II is simple and easy to use. Control it with the multi-directional control knob. You can play, pause, skip tracks and adjust the volume of your speaker, as well as turn it on or off.

APP COMPATIBLE
Download and connect to the Marshall Bluetooth app to access Over-the-Air (OTA) updates and additional controls. If you want to adjust your sound, you can choose between different equaliser settings. The dedicated app gives you control where you want it but won’t slow you down with a complicated set-up.

PRODUCT DETAILS
• PLAY TIME: 30+ HOURS
• WIRELESS CONNECTIVITY: BLUETOOTH 5.3 LE
• ACTIVE NOISE CANCELLATION: YES
• DIMENSIONS: 68 X 160 X 76 MM / 2.68 X 6.30 X 2.99 IN

Kilburn II offers 20+ hours of portable playtime on a single charge and utilises True Stereophonic, a unique form of multi-directional sound from Marshall. This stout-hearted hero weighs only 2.5 kg and is the loudest speaker in its class. Kilburn II has a solid metal grille and a guitar-inspired carrying strap for easy portability.

KILBURN II KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Water-resistant (IPX2)
• Carrying strap

MARSHALL SIGNATURE SOUND
As the loudest speaker in its class, Kilburn II produces a clear midrange, deep bass and extended highs. Its top panel features analogue control knobs for bass, treble and volume, allowing you to fine-tune to the exact sound you desire.

TRUE STEREOPHONIC (360° SOUND)
This stout-hearted hero utilises True Stereophonic, a unique form of multi-directional sound from Marshall. Experience absolute 360° sound where every spot is a sweet spot. Powered by 36 watts, its pronounced and articulate sound pushes the boundaries for a speaker of this size.

ICONIC & RUGGED DESIGN
Kilburn II features flush-mounted corner caps and a water-resistant design that make it supremely rugged and durable, perfect for whatever adventure comes your way. It is encased in vinyl and features a solid metal grille and the iconic Marshall script.

20+ HOURS OF PORTABLE PLAYTIME
Kilburn II weighs just 2.5 kg and offers 20+ hours of portable playtime on a single charge. You can track the speaker’s battery life with the visual battery indicator located on the top panel of the speaker.

WATER-RESISTANT (IPX2)
The road is full of surprises, which is why Kilburn II offers a water-resistant design. Its IPX2 rating means it’s able to withstand a little water.

CARRYING STRAP
Its compact size and guitar inspired carrying strap make Kilburn II perfect to take with you.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IPX2
• DIMENSIONS: 243 X 162 X 140 MM / 9.57 X 6.42 X 5.51 IN

From the explosive Marshall signature sound to the everlasting design, every detail of these headphones has been painstakingly refined. Featuring 100+ hours of wireless playtime combined with a rugged and foldable design, Major V is best paired with your next great adventure.

MAJOR V KEY FEATURES:
• Marshall signature sound
• 100+ hours of wireless playtime
• Rugged and foldable design
• Customisable M-button
• Wireless charging
• Bluetooth LE Audio-ready

MARSHALL SIGNATURE SOUND
We’ve fine-tuned the Marshall signature sound you know and love with custom-tuned dynamic drivers, and reduced distortion meaning you can hear your music with absolute clarity.

100+ HOURS OF WIRELESS PLAYTIME
Packing 100+ hours of wireless playtime, you can be gone for days and never be left without a soundtrack. Major V can be charged using the quick charge option, so you’ll dive back into the session in no time.

RUGGED AND FOLDABLE DESIGN
It takes a lot to wear Major V down thanks to its rugged design. These headphones are also foldable so that you can easily pack them away and be gone for days.

CUSTOMISABLE M-BUTTON
Instantly access your favourite features thanks to Major V’s M-button and the Marshall Bluetooth app. Just press the M-script logo to open the Spotify Tap default function, your EQ settings or voice assistant.

WIRELESS CHARGING
Wireless charging means it’s simple to give Major V a boost when needed. Just rest your headphones on a charging pad and you’re good to go. Major V can also be recharged using a USB-C charging cable included in the box.

BLUETOOTH LE AUDIO-READY
Major V is geared up for Bluetooth LE Audio. This future-proof technology will deliver superior sound quality and open a new world of audio sharing possibilities with Auracast™.

MAKING THINGS LAST LONGER
The in-app battery preservation feature enables you to reduce how quickly your battery ages, so you can get more out of your headphones for longer. 86% of the plastic in Major V is recycled*, made from preloved products including used electronic devices and CDs, extending the lifecycle of these discarded items.
*33% of the product consists of plastic of which 86% is GRS certified post-consumer recycled plastic. Percentage breakdown is based on weight and excludes any plastic that can be found in electronical components due to the lack of detailed material knowledge in every component.

PRODUCT DETAILS:

AUDIO SPECIFICATION:
• DRIVER TYPE: DYNAMIC
• DRIVER SENSITIVITY: 106 DB SPL (100MV @ 1KHZ)
• DRIVER IMPEDANCE: 32 Ω
• FREQUENCY RANGE: 20-20,000 HZ
• DRIVERS: 40 MM

BATTERY:
• PLAY TIME: 100+ HOURS OF WIRELESS PLAYTIME
• BATTERY PRESERVATION: YES
• WIRELESS CHARGING: YES
• QUICK CHARGING: 15 MINUTES CHARGING GIVES 15 HOURS OF WIRELESS PLAYTIME
• CHARGING TIME: 3 HOURS TO FULL RECHARGE

CONTROLS AND CONNECTIVITY:
• WIRELESS CONNECTIVITY: BLUETOOTH 5.3
• WIRED CONNECTIVITY: 3.5 MM INPUT/OUTPUT
• CONNECTIVITY: BLUETOOTH + WIRE
• BLUETOOTH RANGE: 10 M / 30 FT
• CUSTOMISE SOUND: YES
• CONTROLS: CONTROL KNOB, M-BUTTON
• VOICE COMMAND: NO
• CODECS: SBC + MPEG-2 AAC + LC3
• MICROPHONE & REMOTE: YES
• ACTIVE NOISE CANCELLATION: NO

COMPATIBLE APPS:
• APPS: MARSHALL BLUETOOTH APP

PHYSICAL UNIT:
• WEIGHT: 186 G / 6.56 OZ
• WATER RESISTANCE: NO
• COLORWAYS: BLACK
• COLLAPSIBLE: YES
• HEADPHONE TYPE: ON-EAR

INCLUDED IN THE BOX / BOX CONTENTS:
• MAJOR V HEADPHONES
• 3.5 MM AUDIO CORD
• USER MANUAL AND LEGAL AND SAFETY INFORMATION
• USB-C CHARGING CABLE

Middleton utilises True Stereophonic (360° sound), a unique form of multi-directional stereo sound from Marshall. Keep the music going when your phone battery is low, charge your device on the move with Middleton’s trusty power bank feature. With a rugged IP67 dust and waterproof* build, a bit of rain and dirt won’t get under its skin.

* IP67-Protected against dust and sand, and it has been tested to work for up to 30 minutes while under 1 m of water.

MIDDLETON KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Dust & waterproof (IP67)
• Multi-directional control knob

MARSHALL SIGNATURE SOUND
Carry the heaviest portable sound in your hand. This speaker is built with two 3/5” tweeters, two 3” woofers and two passive radiators in a quad-speaker set-up to ensure the ultimate immersive experience wherever you roam. Built-in Dynamic Loudness adjusts the tonal balance of the sound to ensure your music sounds brilliant at every volume.

TRUE STEREOPHONIC (360° SOUND)
Middleton utilises True Stereophonic, a unique form of multi-directional sound from Marshall. Experience superior spatial and binaural sound that flows around you and fills any space. Indoors or out, take your speaker anywhere you like and be immersed in your music. This is absolute 360° sound.

ICONIC & RUGGED DESIGN
Middleton is equally at home in the festival mud or on your polished sideboard thanks to its iconic yet durable design. This speaker is your lifeline on the go, with a grabbable carry strap and trusty power bank capability.

20+ HOURS OF PORTABLE PLAYTIME
Middleton keeps the music going with 20+ hours of portable playtime on a single charge. When you do need to charge, it only takes 4.5 hours to return Middleton to full power and you can quickly charge before you head out – only 20 minutes of charging gives you 2 hours of playtime. The next encore is never far away.

DUST & WATERPROOF (IP67)
This tough-as-nails speaker boasts an IP67 dust and waterproof design and can be submerged in 1 m of water for a period of up to 30 minutes. Middleton has a thick skin, so rain and dirt won’t get under it.

MULTI-DIRECTIONAL CONTROL KNOB
Middleton is simple and easy to use. Control it with the multi-directional control knob. You can play, pause, skip tracks and adjust the volume of your speaker, as well as turn it on or off.

APP COMPATIBLE
If you want a more customised sound, adjust the bass and treble on the top of the speaker, or download the dedicated Marshall Bluetooth app to control the sound wirelessly. Middleton drops you straight into your music with no fuss – just pair and play.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IP67 DUST- AND WATERPROOF
• DIMENSIONS: 109 X 230 X 95 MM / 4.29 X 9.06 X 3.74 IN

Minor IV’s straightforward design lets you focus on what matters most – the music. These earbuds cover all bases so you can dive into Marshall signature sound wherever you go. Packing 30+ hours of wireless playtime with the case, means you have more than a day to get lost in your favourite music or podcast. Add our intuitive, water-resistant earbud design to the mix, and you’ll enjoy every beat in complete comfort.

MINOR IV KEY FEATURES
• Marshall signature sound
• 30+ hours of wireless playtime
• Designed for comfort
• Customise your sound
• Earbuds that last longer
• Bluetooth LE Audio-ready

MARSHALL SIGNATURE SOUND
Marshall signature sound always takes centre stage in our products and Minor IV is no different. These earbuds are acoustically tuned to unleash an expertly balanced sound that commands attention.When you need to take a break from the music, their superior call quality means you can always pick up the phone without any distractions.

30+ HOURS OF WIRELESS PLAYTIME
These earbuds hold up to 7 hours wireless playtime on their own. Paired with the portable charging case they can power you for 30+ hours in total. Simply slip the earbuds into the case when you want an extra boost.

DESIGNED FOR COMFORT
To keep the session going, Minor IV features a re-designed earbud and stem, angled to create a truer fit inside the ear canal. They're also water-resistant so the music doesn’t have to stop when it rains.

CUSTOMISE YOUR SOUND
Minor IV comes with mirrored touch-sensitive earbuds, so you can use either one to control your music and phone calls. Removing and inserting an earbud also initiates the auto-pause and play feature.

EARBUDS THAT LAST LONGER
Our in-app battery preservation feature enables you to reduce how quickly your battery ages. Downloading our Over-the-Air (OTA) updates means your earbuds always have the latest software so that you can get more out of them for longer.

BLUETOOTH LE AUDIO-READY
This future-proof technology will deliver higher audio quality, while increasing streaming range and improving audio sync.

90% RECYCLED PLASTIC
Minor IV’s design consists of 42% plastic. Almost all the plastic used, 90% to be exact, is made from post-consumer recycled plastics from preloved products such as CDs, washing machines, and electric bicycles.

PRODUCT DETAILS
• PLAY TIME:7 HOURS IN EARBUDS / 30+ TOTAL HOURS IN CASE
• CUSTOMISE SOUND: YES
• WIRELESS CHARGING: YES
• BLUETOOTH MULTIPOINT CONNECTIVITY: YES

SPECIFICATIONS:
AUDIO:
• DRIVER TYPE: DYNAMIC
• DRIVER IMPEDANCE: 32 Ω
• FREQUENCY RANGE: 20-20,000 HZ
• DRIVERS: 12 MM

BATTERY:
• PLAY TIME: 7 HOURS IN EARBUDS / 30+ TOTAL HOURS IN CASE
• BATTERY PRESERVATION: YES
• WIRELESS CHARGING: YES
• QUICK CHARGING: 15 MINUTES GIVES 3 HOURS OF PLAYTIME
• CHARGING TIME: 1.1 HOURS TO RECHARGE EARBUDS / 2 HOURS TO RECHARGE CASE

CONTROLS AND CONNECTIVITY:
• WIRELESS CONNECTIVITY: LE AUDIO-READY
• WIRED CONNECTIVITY: NO
• CONNECTIVITY: BLUETOOTH
• BLUETOOTH RANGE: 10 M / 30 FT
• CUSTOMISE SOUND: YES
• CONTROLS: TOUCH RESPONSE
• VOICE COMMAND: NO
• MICROPHONE & REMOTE: YES
• ACTIVE NOISE CANCELLATION: NO
• TOUCH RESPONSE FUNCTIONS:
- CONTROL YOUR MUSIC, RECEIVE
- REJECT AND END CALLS
- CONTROL VOLUME, VOICE ASSISTANT OR EQ PRESET
• MIRRORED CONTROLS: YES

COMPATIBLE APPS:
• APPS: MARSHALL BLUETOOTH APP

PHYSICAL UNIT:
• WEIGHT: 7.39 G / 0.26 OZ
• WATER RESISTANCE: IPX4 IN EARBUDS
• COLORWAYS: BLACK
• COLLAPSIBLE: NO
• HEADPHONE TYPE: IN-EAR

INCLUDED IN THE BOX:
• MINOR IV TRUE WIRELESS HEADPHONES
• CHARGING CASE
• USB-C CHARGING CABLE
• USER MANUAL, AND LEGAL AND SAFETY INFORMATION

Stockwell II utilises True Stereophonic (360° sound), a unique form of multi-directional sound from Marshall. This compact portable speaker offers 20+ hours of playtime. Weighing only 1.4 kg, Stockwell II packs a solid punch despite its pint-sized frame. Bluetooth® 5.0 technology allows you to connect to a variety of wireless devices with a range of 10 m.

STOCKWELL II KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Water-resistant (IPX4)
• Carrying strap

MARSHALL SIGNATURE SOUND
Stockwell II has three class D amplifiers to power its subwoofer, front and rear facing tweeters, for a sound that’s brilliantly powerful and clear. The cabinet is constructed with a bass reflex system that improves bass efficiency and extends the frequency response while lowering distortion.

TRUE STEREOPHONIC (360° SOUND)
Utilising True Stereophonic, Stockwell II provides a multi-directional experience that will immerse you in your music, indoors or out. Experience absolute 360° sound where every spot is a sweet spot.

ICONIC & RUGGED DESIGN
Echoing the legacy of rock ‘n’ roll, Stockwell II has a solid metal grille that pays homage to the steel mesh grille found on many microphones. It also comes equipped with analogue control knobs to fine-tune your music. Stockwell II’s roadworthy construction with silicone exterior also makes it extremely rugged and durable.

20+ HOURS OF PORTABLE PLAYTIME
Stockwell II has quick charging capabilities so you can pick up and leave at a moment’s notice. 20 minutes gets you 6 hours of portable playtime, while a fully charged battery can be reached in 5 hours. Take it with you wherever the long road leads.

WATER-RESISTANT (IPX4)
Stockwell II has an IPX4 water-resistance rating, so it’s able to withstand splashes of water when the weather starts to turn. It’s the perfect speaker to take with you, even when the elements outdoors aren’t perfect.

CARRYING STRAP
Every moment of your life deserves its own soundtrack. Featuring a guitar-inspired carrying strap, Stockwell II is the perfect music companion to take with you. Whether you're heading to the beach or a backyard BBQ, make your listening session one to remember with Stockwell II.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IPX4
• DIMENSIONS: 180 X 161 X 70 MM / 7.09 X 6.34 X 2.76 IN

Tufton packs 20+ hours of portable playtime, allowing you to go further for longer. Bluetooth® 5.0 technology allows you to connect to a variety of wireless devices with a range of 10 m. Tufton’s 3-way design and rear-facing driver produce a clear and articulate sound across all frequencies. Tufton utilises True Stereophonic, a unique form of multi-directional sound from Marshall.

TUFTON KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Water-resistant (IPX2)
• Carrying strap

MARSHALL SIGNATURE SOUND
Tufton is the mightiest portable speaker from Marshall. It’s engineered as a 3-way system, producing sound from three separate drivers from the front of the speaker. An additional mid-range driver is located on the rear of the speaker, offering a clear and articulate sound across all frequencies.

TRUE STEREOPHONIC (360° SOUND)
Tufton utilises True Stereophonic, a unique form of multi-directional sound from Marshall. Experience absolute 360° sound where every spot is a sweet spot.

ICONIC & RUGGED DESIGN
Echoing the legacy of rock ‘n’ roll, Tufton features the iconic Marshall script and has a solid metal grille that pays homage to the steel mesh grille found on many microphones. It also has flush-mounted corner caps, making it an extremely rugged and durable speaker. Tufton is a behemoth of sound made for the open road.

20+ HOURS OF PORTABLE PLAYTIME
Bring the show on the road with Tufton. It offers 20+ hours of portable playtime on a single charge. You can even track the speaker’s battery life with the visual battery indicator located on the top panel of the speaker.

WATER-RESISTANT (IPX2)
The road is full of surprises, which is why Tufton offers a water-resistant design. Its IPX2 rating means it’s able to withstand a little water.

CARRYING STRAP
Tufton was designed for easy portability. Its guitar inspired carrying strap makes it perfect to take with you, wherever you go.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IPX2
• DIMENSIONS: 229 X 163 X 350 MM / 9.02 X 6.42 X 13.78 IN

BOX CONTENTS
• TUFTON PORTABLE STEREO LOUDSPEAKER
• POWER CORD
• QUICK START GUIDE
• LEGAL AND SAFETY INFORMATION

Willen is the mighty portable speaker that is made to go everywhere with you. A top-of-class IP67 dust and waterproof rating means it’s always ready for the road. Willen is ready to roll whenever you are with a hefty 15+ hours of portable playtime on a single charge.

WILLEN KEY FEATURES
• Marshall signature sound
• Iconic & rugged design
• 15+ hours of portable playtime
• Dust & waterproof (IP67)
• Fastening strap
• Built-in microphone

MARSHALL SIGNATURE SOUND
Built with one 2’’ full range driver and two passive radiators, Willen brings you the heavy Marshall sound you can’t live without. High-fidelity Marshall tuning and solid instrument separation stands Willen head and shoulders above its competition. Power your music with Marshall signature sound every single time, even when the session isn’t planned.

ICONIC & RUGGED DESIGN
Willen brings together the iconic Marshall design with a ruggedness that dares you to push its limits. This compact powerhouse is the ultimate on-the-go speaker that makes sure your music is king. Willen is raring to go wherever you go.

15+ HOURS OF PORTABLE PLAYTIME
Willen is ready to roll whenever you are with a hefty 15+ hours of portable playtime on a single charge. Whenever you need to top up its battery, 3 hours of charging will bring it back to full power.

DUST AND WATERPROOF (IP67)
Designed to shake off the elements. This outdoor speaker couldn’t care less about what you throw at it with its top-of-class IP67 dust and waterproof rating. It’s always ready for the road, rain or dirt won’t stop the session.

FASTENING STRAP
Willen is the ultimate multi-purpose speaker with its flexible positioning. Stand it up, lay it down, fix it to an object or let it hang out with its rubber back-mounted strap. Attach Willen anywhere you can think of and share your music with anyone who wants to hear it.

BUILT-IN MICROPHONE
Make sure your voice is heard with Willen’s built-in microphone. Answer and reject calls using the front-mounted control knob and enjoy some hands-free chat. Whether you’re taking a quick work call or video chatting with friends around the world, Willen will make sure no one misses a word.

MULTI-DIRECTIONAL CONTROL KNOB
Enjoy a more hands-on music listening experience by using Willen's front-mounted multi-directional control knob. You can play, pause, skip tracks and adjust the volume of your speaker, as well as turn it on or off.

APP COMPATIBLE
The shortest distance between you and your music is Willen – just pair and play without any complicated set-up. Connect with Bluetooth 5.1 and control your music in the dedicated Marshall app. If you want to adjust your sound, you can choose between three equaliser presets. With Willen, no heavy thinking is required, just heavy listening.

PRODUCT DETAILS
• PLAY TIME: 15+ HOURS
• STEREO/MONO: MONO
• WATER RESISTANCE: IP67 DUST- AND WATERPROOF
• DIMENSIONS: 101,6 X 100,5 X 40,4 MM / 4 X 3.96 X 1.59 IN

Woburn III is guaranteed to fill any space with immersive, home-shaking Marshall signature sound. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume. Woburn III is ready for the future of Bluetooth technology and has been built ready to deliver next-generation Bluetooth features the moment they are available.

WOBURN III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising of high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA + HDMI)
With so many ways to connect to Woburn III, getting the right sound for listening to music or watching TV has never been so effortless. Connect to your speaker directly from your device using Bluetooth, RCA or 3.5 mm input. Woburn III also has an HDMI input, which allows you to connect Woburn III to your TV for a uniquely Marshall viewing experience.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 90 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15W CLASS D AMPLIFIERS FOR THE MIDS
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT
• HDMI INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 400 X 317 X 203 MM / 15.75 X 12.48 X 7.99 IN

USB 5v input and output to 5.5/2.1mm barrel plug
Not for version MRBT-4.

Custom splitter cable for linking 2 Minirigs and a Subwoofer

MRBT-Mini 2 Bluetooth Speaker (2.0 Stereo HHV Bundle contains:
• 2x MRBT-Mini 2 Bluetooth Speaker

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

MRBT-Mini 2 Bluetooth Speaker (2.0 Stereo HHV Bundle contains:
• 2x MRBT-Mini 2 Bluetooth Speaker

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

Minirig silicon case

The Mr Bongo Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

The Naan Shredded 3 Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Nagaoka Headshell HSAL-01

This headshell has been designed with the utmost precision to give you an outstanding listening experience.

Design for maximum ease of use:
When placing the needle, the finger lift design provides an excellent view of the needle tip. The finger hook is easy to use and the angle can be easily held with your fingers. Every detail has been designed with the utmost care to ensure uncomplicated and pleasant use.

Ideal for NAGAOKA JT-80 Series and many other pickups:
This high-quality headshell was developed specifically for the NAGAOKA JT-80 series to ensure an optimal combination of precision and performance. Enjoy music in its purest form with this perfectly coordinated combination.

Of course, the Nagaoka HSAL-01 can also be combined with other pickups. The elongated holes allow the perfect positioning of your pickup and the included cables leave enough room for adjustment.

Easy installation:
The Nagaoka Headshell HSAL-01 comes with an installation guide to give you an effortless setup. The package contains all the necessary items including mounting screws to make the installation process easier for you.

Product specifications:
• Housing material: aluminum
• Pin: Gold plated
• Weight: 6.8g (approximate value, excluding mounting screws)
• Frequency response: 20Hz - 20kHz
• Box contents: headshell housing, lead wire, 2 × 12mm screws, 2 × 6mm screws, compatible nuts, washers.

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The OP Art 2 Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN