DJ Equipment 387 Items

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

The Bundle contains 5x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

Premium HiFi turntable with Ortofon 2M Blue cartridge

DESIGNED WITH PRECISION FROM THE OUTSET
The Turn X's direct-drive DC motor offers incredibly accurate and consistent speeds. The high torque ensures lightning-fast start-up times and minimal variances of just +/-0.03%. The Turn X excels when operated in full manual mode, where its electronic brake and rotary switch for smooth starting and stopping, which also doubles as a speed selector (33, 45 and 78 RPM), shine.

BALANCE PERFECTION
A solid aluminium block supports the record player's precision-machined die-cast platter. Its hefty 2.1 kg, 332 mm diameter and 22.5 mm thickness ensure smooth, even movement. The damping rubber coating on the back of the turntable and the rubber mat provide excellent isolation properties and minimise vibrations.

AUDIOPHILE TONEARM
The statically balanced S-shaped tonearm can be adjusted in height to change the cartridge's azimuth (the angle at which the needle approaches the record) and the record's vertical tracking angle (VTA). The tonearm design guarantees free and fluid movement and optimum cartridge performance.

CRYSTAL CLEAR SOUND QUALITY
The Turn X has a high-quality Ortofon 2M Blue cartridge pre-installed, ensuring excellent dynamics and sound resolution to satisfy even the most discerning audiophiles. Another highlight: The universal SME connector enables a quick and easy cartridge system change if required.

SOUND AND NOTHING BUT SOUND
The turntable's solid MDF chassis is exceptionally sturdy and robust, keeping unwanted resonances at bay from the outset. As a bonus, the Turn X is effectively decoupled thanks to the height-adjustable isolator feet.

DESIGN WITHOUT COMPROMISE
In addition to meeting the exacting demands of vinyl enthusiasts, the Reloop Turn X is a true visual showpiece. The record player's sleek design, sophisticated one-button control, and classy piano lacquer finish make it a real eye-catcher.

ATTENTION TO DETAIL
Last but not least, the Turn X features a gold-plated high-resolution phono output and a gold-plated ground connector for optimum signal transfer and corrosion resistance. Interference is reduced even further by the power switch's ultra-low noise insulation.

FEATURES:
• Quartz-controlled, premium HiFi turntable
• Super high torque, direct drive DC motor with ultra-precise rotation speed
• Extra-heavy, CNC machined 22,5 mm thick aluminium platter with rubber damping
• Quick start-up and drift-off rotation speed less than +/-0.03%
• Full manual operation with motor control-switch to select three different speeds (33, 45 and 78 RPM)
• Precision machined, extra heavy aluminium die-cast platter for a perfectly balanced rotation (305 mm diameter, 22.5 mm thick, 2.1 kg)
• Deadening rubber covering rear platter surface & special 5 mm rubber mat for optimized resonance control and damping
• Sunk-in platter cavity construction
• Static-balanced S-shaped tonearm with VTA adjustment
• Adjustable anti-skating wheel for optimal pick-up tracking
• Pre-installed Ortofon 2M Blue cartridge for excellent dynamics and sound resolution
• Universal headshell connector (SME) provides added flexibility
• Counterweight supplied supports a wide variety of cartridges
• Premium, high-resolution audio phono outputs (with separate grounding connection)
• Gold-plated, corrosion-resistant audio connections (detachable power and RCA cables)
• Built-in switching power with ultra-low noise isolation design
• Rigid construction, with extra-heavy, solid MDF wooden plinth
• Height-adjustable, shock-resistant insulator feet for effective decoupling
• Timeless design with high-gloss, black piano finish
• Accessories included: Turntable platter, dust cover, 2x dust cover hinges, balance counterweight, Phono RCA cable with grounding cable, AC power cord, rubber mat, instruction manual, Ortofon 2M Blue cartridge & headshell

TECHNICAL DATA
Turntable Section:
• Type of turntable: Direct drive, fully manual
• Drive: Quartz driven upper-torque direct drive with precision rotation
• Motor: DC Motor, 16-Pole, 3-Phase, brushless
• Rotation speeds: 33 1/3, 45 & 78 RPM
• Starting Torque: More than 4500 g/cm
• Start-up time / rpm change: Less than 0.3 sec.
• Wow and Flutter: Less than 0.1% WRMS (JIS WTD)
• S/N Ratio: More than 60dB (DIN-B)
• Breaking System: Electronic brake

Turntable Platter:
• Turntable Platter: Aluminium die-cast
• 305 mm diameter
• Weight About 2.1 kg

Tonearm Section:
• Type: Static balanced S-Shape
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle: Less than 3 degrees
• VTA Adjustment Range: 0-6 mm
• Applicable Cartridge Weight: 17 – 25 g (incl. Headshell)
• Anti-Skating Range: 0-3 g
• Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal

Cartridge:
• Type of cartridge: Ortofon 2M Blue
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 25 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 80 µm
• Compliance, dynamic, lateral: 20 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Blue
• Cartridge weight: 7.2 g

General:
• Power Supply: AC IN 100~240V, 50/60 HZ
• Power consumption: 3W
• Dimensions: 460(W) x 367.3(D) x 172.6(H) mm
• Weight: 10.35 kg
• Incl.: dust cover + 2x hinge, rubber mat, power supply cable, RCA cable with grounding connection (gold-plated), Headshell with Ortofon 2M Blue (pre-installed), turntable platter, operation manual & counterweight

PREMIUM BELT DRIVE USB TURNTABLE SYSTEM

HIGHLIGHTS:
Belt-driven HiFi turntable with Ortofon 2M Red
20 mm acrylic platter with LED lighting
Decentralised drive motor with external belt guide

SOUND MEETS DESIGN
The Turn 7 bridges the gap between high-end HiFi turntables and uncompromising design. The belt-driven turntable meets the exacting demands of audiophile music fans thanks to precisely manufactured components. The acrylic platter with LED lighting and the external drive belt make the Turn 7 an absolute eye-catcher.

POWERFUL AND STEADY DRIVE
A decentralised, low-vibration DC motor drives the Turn 7. The integral flat belt runs gracefully along the turntable exterior, ensuring smooth operation and a sophisticated appearance. The start/stop rotary switch allows you to select between the turntable's two speeds (33 and 45 RPM).

HEART OF ACRYLIC: THE TURNTABLE PLATTER
The acrylic platter is 20 mm thick, weighs 1.7 kg, and has outstanding evenness thanks to precision manufacturing. It also has excellent antistatic characteristics. As a result, crystal-clear audio is possible without using a platter mat. The satin finish of the material creates a focal point and contrasts with the otherwise plain design of the belt-driven turntable.

LET THERE BE LIGHT – LEDS INSIDE
One of the unique features of the Turn 7 is the optional, blue platter illumination. Inconspicuously placed beneath the platter, multiple LEDs with a diffuser cover sets the mood and creates a warm and inviting ambience.

TOP-CLASS TONE ARM
The high-quality carbon tone arm has exceptional acoustic properties. The turntable's authentic sound is brought out to its full potential by effectively cancelling out vibrations. The ability to adjust the height (vertical tracking angle – VTA) and an anti-skating adjustment ensure maximum precision.

ORTOFON 2M RED PRE-INSTALLED
The turntable comes with the Ortofon 2M Red cartridge system pre-installed. The Ortofon 2M Red has an elliptical stylus tip and excellent sonic characteristics, including first-rate sound accuracy and reproduction. The Ortofon 2M Red is a highly versatile cartridge system with an open, dynamic sound and warm tones. The universal headshell connection (SME) adds more options for cartridge systems.

METICULOUSLY PERFECTED
In addition to its high-quality preamplifier, the Turn 7 also features versatile switching between line and phono signals. The gold-plated corrosion-resistant RCA connectors ensure the best possible signal transmission. The built-in USB output allows you to digitise vinyl records.

SIMPLE DESIGN & PURE FUNCTIONALITY
The sturdy MDF wooden plinth and height-adjustable isolator feet with aluminium surround provide effective decoupling for the turntable. The high-gloss piano lacquer is a classy contrast to the timeless minimalism while emphasising the Turn 7's superior quality.

FEATURES:
• Premium belt-driven HiFi turntable
• Decentralised DC motor with external drive belt on the acrylic platter
• Fully manual operation with motor control switch for switching between speeds (33/45 RPM)
• Precision-machined, 20 mm thick solid acrylic platter (1.7 kg) with outstanding levelling and electrostatic properties for a crystal-clear sound
• Indirect blue LED lighting on the acrylic platter (can be switched on/off)
• Audiophile carbon tonearm with height adjustment (VTA) and anti-skating adjustment
• Pre-installed Ortofon 2M Red cartridge for optimised sound reproduction and fidelity
• Universal headshell connection (SME) for additional flexibility
• USB recording function: Recording and digitisation of vinyl via the simply USB connection for PC/Mac
• High-quality integrated preamp (switchable phono/line output)
• Gold-plated, corrosion-resistant audio connections (removable power and RCA cable)
• Height-adjustable, shockproof aluminium feet for effective decoupling
• Solid MDF plinth with piano finish and a timeless design
• Incl.: dust cover, 2x hinges, felt mat, international power supply (UK/EU/US), RCA cable, headshell with Ortofon 2M Red (pre-installed), 7" aluminium adapter, acrylic turntable platter, allen key, USB-cable, instruction manual & counterweight

TECHNICAL SPECIFICATIONS:
Turntable Section:
• Type of turntable: Belt-Driven manual Turntable System with USB Interface
• Drive: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45
• Starting Torque: //
• Start-up time / rpm change: //
• Wow and Flutter: 0,2% WRMS
• S/N Ratio: >45dB or higher
• Breaking System: Manually
Turntable Platter:
• Turntable Platter: Acrylic glass
• Diameter: 300 mm
• Weight: 1.7 kg
Tonearm Section:
• Type: Straight Tonearm
• Effective Length: 223.6 mm
• Overhang: 18.61 mm
• Tracking Error Angle: ±1.5°
• VTA Adjustment Range: - 2 ~ 4 mm
• Applicable Cartridge Weight: 7.2 ~ 11.2 g (incl. Headshell)
• Anti-Skating Range: 0 - 4 mm
• Terminals: 1x PHONO/LINE Out
Cartridge:
• Ortofon 2M Red
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 µ Mm
• Compliance, dynamic, lateral: 20 µ Mm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 24.7°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g
General:
• Power Supply: 12V, 1A DC
• Power consumption: 12W
• Dimensions: 420(W) x 356(D) x 148(H) mm
• Weight: 8.2 kg

Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.
The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.
On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.
With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record.

FEATURES
•Quartz-Controlled HiFi turntable with high torque
•Brushless Direct Drive DC Motor
•Precision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotation
•Deadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and damping
•Static-balanced S shaped tonearm with VTA adjustment
•Adjustable anti-skating dial for improved cartridge tracking
•Pre-installed Ortofon 2M Red cartridge
•Integrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM)
•Universal Headshell Connector provides added flexibility
•High Quality Phono outputs (with separate grounding connection)
•Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable)
•Sunk-in terminal cavity for protected connection
•Especially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decoupling
•Supplied counterweight supports a wide variety of cartridges
•Elegant design with deep black Piano Finish and a fully gold anodised Platter
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

TECHNICAL DATA

Turntable Section:
•Type: Direct Drive Manual Turntable System
•Drive: Quartz driven upper-torque direct drive
•Motor: 16 pole, 3 phase, brushless DC motor
•Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
•Starting Torque: 4500 g/cm
•Start-up time / rpm change: less than 0.2 sec.
•Wow and flutter: 0.01% WRMS
•S/N Ratio: More than 55 dB (DIN-B)
•Brake system: electronic brake

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 332 mm
•Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
•Type: Universal Static Balanced S-Shaped
•Effective Length: 230 mm
•Overhang: 15 mm
•Tracking Error Angle: Less than 3 degree
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•Adjustable Tonearm Base (VTA): 0-6 mm
•Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
•Anti-Skating Range: 0 – 3 g
•Effective tonearm mass: 20 g (incl. headshell)

Terminals:
•1x PHONO Out (gold-plated), 1x GND Earth Terminal
General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power Consumption: 9 W
•Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
•Weight: approx. 12.8 kg

Included Accessories:
•Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, power cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

Premium HiFi-turntable with digital USB-Audio Interface.

• Authentic HiFi turntable with digital USB-Audio Interface
• Pre-installed Ortofon 2M Red cartridge
• Low-vibration DC motor

Over 25 years experience
With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.

Quiet DC drive
The heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.

Electronic speed control for 33, 45 & 78 rpm
The TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.

Revised tonearm construction
The redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience.

Anti-skating wheel
The anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.

Headshell connection
The headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.

USB recording function
The integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.

Semi-automatic stop
With the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.

Shock-absorbing feet
Decoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal.

Precision-manufactured die-cast aluminium turntable
The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.

Solid base with piano finish
The sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image.

Immediate listening pleasure with hi-tech Ortofon cartridge
The TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.

Gold-plated connections
The gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.

High-end pre-amplifier
Equipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.

A class of it's own
The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

SPECIFICATIONS
FEATURES:
• Authentic HiFi turntable with precision belt drive
• Supplied with pre-assembled Ortofon 2M Red cartridge
• Optimised tonearm design for optimal tracking accuracy with flexible SME mounting
• Integrated high-quality preamplifier, can be switched on/off (phono/line output)
• USB recording function: recording and digitalisation of vinyl via simple USB connection for PC/Mac
• Semi-automatic stop function (can be activated optionally)
• Manual tonearm lift for analogue playback pleasure
• Low-vibration DC motor
• Integrated motor control with large speed selector switch (33/45/78 RPM)
• External DC power supply for trouble-free operation (100-230 V / 12 V / 500 mA)
• Precision-machined die-cast aluminium platter for resonance optimisation
• Infinitely adjustable anti-skating system with rotary wheel for optimum tracking accuracy
• Gold-plated, anti-corrosion connectors (all cables removable)
• Special turntable feet for effective decoupling
• High-gloss piano-finish cabinet
• On/Off switch on the back of the unit
• Incl. Ortofon 2M Red cartridge pre-mounted on headshell, counterweight, dust cover incl. hinges, felt mat, aluminium turntable, 7" aluminium adapter, RCA & USB cable and international power supply (UK/EU/US)

TECHNICAL DATA
TURN 3 MK2:
• Type of turntable: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45 & 78
• Wow and Flutter: 0.2% WRMS
• Analogue Output: Phono / Line, switchable
• Connections: RCA Audio output (gold-plated), USB type B
• Phono Output Level: 4.0 mV (with Ortofon 2M Red)
• Line Output Level: 224 mV (with Ortofon 2M Red)
• Tone Arm type: Straight
• Effective Arm Length: 223.6 mm
• Effective tonearm mass: 21.4 g
• Overhang: 18.6 mm
• Tracking force Range: 18 mN
• Platter diameter: 300 mm
• Anti-Skating adjustment: Yes
• Type of cartridge: MM (Ortofon 2M Red)
• Power consumption: 6W
• S/N: >60 dB or higher
• USB Audio Output with 48 kHz / 16-Bit
• USB Funktion: USB rec. function
• Supported Operating System: Windows & Mac
• Dimensions: 450 x 352 x 138.7 mm (incl. Dust cover)
• Weight: 6.5 kg

ORTOFON 2M RED:
• Output voltage at 1000 Hz, 5cm/sec.: 5,5 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 μMm
• Compliance, dynamic, lateral: 20 μMm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μMm
• Tracking force range: 1,6-2,0g (16-20 mN)
• Tracking force, recommended: 1,8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1,3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g

Manual: https://www.reloop-hifi.com/media/productattach/t/u/turn3mk2_im.pdf

•The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musicians
•Designed for Serato DJ Pro: control 7 new colour-coded performance modes
•Platter Play mode: performance pads can be used to control the speed of the platter to enable melodic and musical live performances

FEATURES
•NEW in the MK2 version:
•The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musicians
•Designed for Serato DJ Pro: control 7 new RGB colour-coded performance modes
•Platter Play: in this mode, the performance pads can be used to control the speed of the platter to enable melodic and more musical live performances
•Extra large, highly responsive performance pads with multi-colour LEDs
•22 scales are available with the option to create up to 9 custom scales
•Pitch bending function via speed select buttons in Platter Play mode
•Reworked control section: more streamlined multi-encoder and intuitive mode section
•First of its kind: independent pad modes (when used in conjunction with the ELITE mixer)
•Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation
•More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
•Fine-tuned motor control for further optimization of wow and flutter and rotation
•Newly-developed, height-adjustable MK2 tone arm base (VTA)
•Particularly lightweight and rigid satin aluminium material used for tone arm
•Adjustable pitch scale for precise adjustments
•Additional output: the turntable can be connected to two mixers at the same time and also allows easy switching from DVS to vinyl
•Optional ground terminal offers additional protection in complex club & studio environments
•Easily replaceable, freely rotatable LED needle light in new unibody aluminium design
•High-quality and hard-wearing deep black, metallic finish
•Quartz driven hybrid turntable instrument with upper-torque direct drive
•Takes your DJ performances to a new level of creativity and musicality
•MIDI compatible control section consists of multi-encoder, 8 large LED pads, three layers with 7 performance modes (cue, sampler, saved loops, pitch play, loop, loop roll, slicer) and 2 user modes
•Digital LC display for pitch, BPM, scale, key, deck assignment and firmware settings
•Seamlessly combines a powerful musical instrument and a world class professional DJ turntable
•Adjustable stop time (0.2 - 6 sec.)
•Precise motor control with 3 speeds (33 1/3, 45 & 78 RPM)
•Precision manufactured, die cast aluminium turntable
•Rubber inlays reduce vibrations and background noise
•Statically balanced, universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•High-resolution pitch fader (0.02 % resolution)
•Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
•Quartz lock
•Reverse function: switch for forward and reverse operation
•Smart USB link for up to 4 turntables
•Auto deck-assign feature when linked
•Recessed connection cavity for easy installation in cases & seamless adjustment
•Phono and line out (no grounding required)
•Removable mains and RCA cables
•Safety mains switch
•Shock-absorbing feet insulate against vibrations
•Incl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

TECHNICAL DATA

Turntable:
•Type: direct-drive turntable
•Drive: quartz driven upper-torque direct drive
•Motor: 16-pole, 3-phase, brushless motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
•Starting torque: 2.8 - 4.5 kg/cm (adjustable)
•Adjustable stop time (0.2 - 6 sec.)
•Start-up time / change to RPM: < 0.2 sec
•Wow and flutter: 0.01% WRMS*
•S/N ratio: > 55 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: die cast aluminium
•Diameter: 332 mm
•Weight: approx. 1.5 kg

Tone arm:
•Type: universal, static balanced, S-shaped
•Effective length: 230 mm
•Overhang: 15 mm
•Tracking error range: < 3°
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•VTA setting range: 0 - 6 mm
•Usable weight of pick-ups: 3.5 ~ 8.5 g (incl. headshell 13 ~ 18 g)
•Anti-skating range: 0 - 3 g
•Effective tone arm mass: 30 g

Connections:
•1x PHONO/1x LINE out (gold-plated), 1x GND earth connection, 1x USB port (type B)

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 17 W
•Dimensions: 458 (w) x 354 (d) x 144,6 (h) mm
•Weight: approx. 11.8 kg
•Incl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

RP-7000 MK2 SILVER

• NextGen Turntable for professional Club DJs and Turntablists
• Power-Torque Direct Drive with precise motor control and stable rotation
• Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

PROFESSIONAL UPPER TORQUE TURNTABLE SYSTEM
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

STURDY CASING CONSTRUCTION
By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASE
The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

DUAL START/STOP BUTTONS, PRECISE MOTOR CONTROL AND REVERSE FUNCTION
As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

HIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADER
Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMP
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIES
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

FEATURES
New features of the MK2 version:
• Built for the club: rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and molding compound for high vibration damping and isolation
• More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
• Fine-tuned motor control for further optimization of wow and flutter and rotation
• Newly developed, height-adjustable tone arm base (VTA) and anti-skating control
• Particularly lightweight and rigid, satin aluminium material used for tone arm pipe
• Pitch scale for precise adjustments
• Optional ground terminal offers additional protection in complex club & studio environments
• Easily replaceable, freely rotatable LED needle illumination in new unibody aluminium design
• High-quality and hard-wearing silver metallic finish
• Quartz driven DJ turntable with upper-torque direct drive
• Adjustable brake speed (0.2 - 6 sec.)
• Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
• Precision manufactured, die cast aluminium turntable
• Rubber inlays for reduction of vibrations and background noise
• Statically-balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
• Universal connection for pick-up systems (SME)
• Pitch range +/-8 %, +/-16 %, +/-50 % (ultra pitch)
• Quartz lock
• Additional start/stop button for vertical positioning
• Reverse function: switch for forward and reverse playback
• Recessed connection cavity for easy flight-case installation & seamless adjustment
• Phono and line out (no grounding required)
• Removable mains and RCA cables
• Safety mains switch
• Shock-absorbing feet against vibrations
• Incl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructions, without cartridge

TECHNICAL DATA
Turntable:
• Type: direct-drive turntable
• Drive: quartz driven upper-torque direct drive
• Motor: 16-pole, 3-phase, brushless motor
• Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
• Starting torque: 2.8 – 4.5 kg/cm (adjustable)
• Adjustable stop time (0.2 - 6 sec.)
• Start-up time / change to RPM: <0.2 sec
• Wow and flutter: 0.01% WRMS*
• S/N ratio: > 55dB (DIN-B)
• Brake system: electronic brake
• Record weight: recommended 800g

Platter:
• Material: die cast aluminium
• Diameter: 332 mm
• Weight: approx. 1.5 kg

Tone arm:
• Type: universal, statically balanced, S-shaped
• Effective length: 230 mm
• Overhang: 15 mm
• Tracking error range: < 3°
• Offset Angle: 22°
• Stylus Pressure: 0 - 4 g
• VTA setting range: 0-6 mm
• Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
• Anti-skating range: 0 – 3 g
• Effective tone arm mass: 12.8 g (incl. headshell)

Connections:
• 1x Phono/Line Out (gold-plated), 1x GND earth connection

General:
• Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
• Power consumption: 13 W
• Dimensions: 458 x 144.6 x 354 mm
• Weight: approx. 11.7 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238928_Reloop_IM.pdf

•NextGen Turntable for professional Club DJs and Turntablists
•Power-Torque Direct Drive with precise motor control and stable rotation
•Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

FEATURES
NEW features of the MK2 version:
•Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
•More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
•Fine-tuned motor control for further optimization of wow and flutter and rotation
•Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
•Particularly light weight and rigid, satin aluminium material used for tone arm
•Adjustable Pitch scale for precise adjustments
•Optional ground terminal offers additional protection in complex club & studio environments
•Easily replaceable, freely rotatable LED needle light in new unibody aluminium design
•High-quality and hard-wearing deep black, metallic finish
•Quartz driven DJ turntable with upper-torque direct drive
•Adjustable stop speed (0.2 - 6 sec.)
•Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
•Precision manufactured, die cast aluminium turntable
•Rubber inlays for reduction of vibrations and background noise
•Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
•Quartz lock
•Additional start/stop button for vertical positioning
•Reverse function: switch for forwards and reverse operation
•Recessed connection cavity for easy installation in cases & seamless adjustment
•Phono and line out (no grounding required)
•Removable mains and RCA cable
•Safety mains switch
•Shock-absorbing feet against vibrations
•Incl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructions

•Comes without cartridge!

TECHNICAL DATA

Turntable:
•Type: direct-drive turntable
•Drive: quartz driven upper-torque direct drive
•Motor: 16-pole, 3-phase, brushless motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
•Starting torque: 2.8 – 4.5 kg/cm (adjustable)
•Adjustable stop time (0.2 - 6 sec.)
•Start-up time / change to RPM: <0.2 sec
•Wow and flutter: 0.01% WRMS*
•S/N ratio: > 55dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: die cast aluminium
•Diameter: 332 mm
•Weight: approx. 1.5 kg

Tone arm:
•Type: universal, static balanced, S-shaped
•Effective length: 230 mm
•Overhang: 15 mm
•Tracking error range: < 3°
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•VTA setting range: 0-6 mm
•Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
•Anti-skating range: 0 – 3 g
•Effective tone arm mass: 12.8 g (incl. headshell)

Connections:
•1x PHONO/LINE Out (gold-plated), 1x GND earth connection

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 13 W
•Dimensions: 458 x 354 x 144,6 mm
•Weight: approx. 11.7 kg

STANDARD REDEFINED
The professional RMX-95 4+1 channel club mixer blurs the lines between analogue workflow and digital technology. The RMX-95 is a cutting-edge, extraordinarily versatile creative tool thanks to its dual-USB 2.0 interface, redesigned effects section, optional MIDI mapping of all controls, and smooth integration of the djay PRO AI DJ software. The club mixer has a familiar and user-friendly interface, making it suitable for both professional and hobby DJs.

SURGICAL SOUND MANIPULATION IN EVERY DETAIL
Will you go for "Classic" or "Kill"? The RMX-95's 3-band EQ can be adjusted to allow maximum sound control for unique results.
Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher and Transformer are just some of the many studio-quality effects included in the brand-new Beat FX unit. The dedicated FX frequency control (LPF/HPF) lets you apply the effects to a specific frequency range for a more unique sound.
And that's not all: Each channel also features a bipolar filter unit (LPF and HPF) with real-time resonance adjustment. This allows for even more complex sound productions.
Two digital displays show parameter changes in real time for precise control that goes beyond hearing.

CONNECTIONS GALORE
The RMX-95 also excels in terms of connectivity: Four CD, two line, and two phono inputs are available on the four input channels. The separate microphone channel has two microphone connections (1 x jack, 1 x jack/XLR combination jack) and an additional AUX input. The master output offers RCA or balanced XLR cable connections. The booth output has two jack connections for stereo operation. However, it can also be used in mono mode. A recording device can be connected to the Rec output via RCA jacks to record DJ sets – regardless of the master output level. Last but not least, the DJ mixer has two jacks for headphones.

MAXIMUM FLEXIBILITY: DUAL-USB AUDIO INTERFACE
Superior 24-bit sound quality is provided by the ten inputs and outputs of the high-quality dual-USB 2.0 interface. The two USB ports allow smooth transitions between DJs and maximum flexibility when using different setups in a single club night. In addition, the active USB hub enables the connection of additional USB devices.

FULLY DIGITAL ARCHITECTURE
The RMX-95's digital architecture transforms the DJ mixer into an individually mappable MIDI controller. As part of this, the setup menu provides a wealth of customisable options, such as EQ frequency range, Neural Mix™ EQ mode, audio interface routing, and zone routing for the booth output.

DVS-ENABLED FOR DJAY PRO AI & NEURAL MIX™
The RMX-95 works with Algoriddim djay PRO AI via plug and play. The DJ app's ground-breaking Neural Mix function lets you isolate beats, melodies, and vocals in the mix in real time. The RMX-95 supports djay PRO AI's advanced DVS integration with Mac, PC, iPhone and iPad. The DJ software is also compatible with streaming services like Tidal¹, Soundcloud¹, Beatport Link¹ or Beatsource Link¹.

CRISP CUTS AND SMOOTH BLENDING
The adjustable curve of all faders provides DJs with the creative flexibility they want while mixing. Turntablists and scratch wizzards can also upgrade the crossfader with the contactless RMX innoFADER.

INDESTRUCTIBLE DESIGN
The club mixer's sleek black metal surface is not only eye-catching but also highly durable. The solid metal housing and hard-wearing metal shafts in all of the built-in potentiometers and switches provide a long service life, even with heavy club use.

FEATURES:
• Professional 4+1-channel DJ club mixer
• DUAL 10 In/Out USB 2.0 audio interface with superb, 24-bit sound quality
• New Beat FX unit with multiple effects in studio quality: Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher,Transformer
• FX frequency control (LPF/HPF) for manipulating effects in selected frequency band
• Sound filters: Bi-polar filter unit with LPF and HPF
• Realtime resonance control for channel filters
• Active USB hub to connect USB accessories
• 3-band EQ with adjustable behaviour (classic/kill)
• Two digital displays showing real-time information of parameter changes
• Digital mixer architecture with extensive adjustment options
• Extensive setup menu, including:
• EQ frequency range (low, high)
• Neural Mix™ EQ mode
• Audio interface routing
• Booth output zone routing (matrix)
• CUE solo option
• RMX innoFADER compatible
• Adjustable linefader and crossfader curves
• MIDI-compatible control elements
• 2x High-retention USB 2.0 port, especially durable
• 2x Mic inputs with dedicated MIC ON button
• 2x Headphone outputs via 6.3/3.5 mm stereo jack with split cue
• 2x Mic inputs with dedicated MIC ON button
• Booth output in stereo or mono
• High-quality and hard-wearing, pure black metallic finish
• Sturdy construction in a metal housing with bolted metal shafts
• Kensington lock to secure the device
• Incl. manual, power cord, and USB cable

FIRST-CLASS DJ MIXER
The RMX-60 Digital is a first-class mixer for any DJ application. With its extensive range of connection options, robust construction and fully-digital audio architecture; Reloop’s latest mixer takes the classic 4+1 channel mixer design and updates it to suit modern performance standards. Whether you’re using CD players, Turntables, DJ controllers or DVS systems – the RMX-60 Digital’s 11 input and 6 output options bring true versatility into the DJ booth.

ADJUSTABLE LINE- AND CROSSFADER CURVES
To suit different mixing and scratching styles the RMX-60 Digital’s line- and crossfader-curves are adjustable, and there’s also a linefader start function. The crossfader is freely assignable between all channels, and the stock fader can also be switched for the new RMX Innofader by Audio Innovate, which is specifically designed for Reloop mixers to offer a gentle, gliding performance.

ACTIVE DUCKING TECHNOLOGY
The RMX-60 Digital is a true all-round club mixer. Neat finishing touches such as the “Active Ducking Technology” for the mic channel, and the future-proof firmware system that can be retro-updated by connecting to a computer, elevate this to a mixer that can support any type of DJ for years to come.

FEATURES
• Classic 4+1 channel performance club mixer
• 11 inputs, 6 outputs
• Fully digital architecture for outstanding sound and flexibility
• 8 high-quality performance effects in studio quality (flanger, delay, echo, reverb, gate, pitch shift, phase, bit crusher, noise)
• Large, clearly arranged parameter display
• Bipolar filter per channel
• Adjustable EQ characteristics (kill & classic)
• InnoFader compatible (RMX InnoFader available separately)
• Crossfader assign switch per channel
• Mic channel with 2-band EQ & talkover ''Active Ducking Technology'' for mic channel
• 2 headphones outputs (jack and mini jack)
• Intelligent 1-knob equalizer and mono/stereo switch for headphones
• Future-proof due to innovative, updateable firmware system (USB service port)
• Fader & crossfader-start and curve adjust
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs

TECHNICAL DATA
• Inputs: 2 Phono, 7 Line, 1 Combo-Mic
• Outputs: 1 XLR, 1 Jack, 2 RCA, 2 headphones
• Frequency range: 20 Hz - 20 kHz
• EQ range classic: +12 dB / -8 dB
• EQ range isolator: +12 dB / -26 dB (Total Kill)
• Dimensions: 320 x 107.5 x 386.7 mm
• Weight: 6.8 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/2/232553_Reloop_IM.pdf

As consequent advancement of the popular RH-2400 series, the successor offers an even more precise bass sound thanks to the completely closed construction. Despite powerful kicks the sound characteristics remain transparent: Brilliant mids and highs and high output make monitoring and mixing easy. Improved wearing comfort could be realized due to reduced weight and a new headband construction. The bordered Reloop sign on the ear cups top off the new RH-2500's appearance.

FEATURES
•Professional DJ headphones with swivel/fold-in construction
•Closed construction
•One-sided cord routing (oxygen-free copper strand)
•Excellent sound characteristics due to cobalt saggar with broad efficiency factor
•Outstanding manufacturing with extra fortified bracket construction
•High output capacity
•Precise reproduction of bass, treble and high frequencies
•Excellent wearing comfort thanks to further reduced weight
•Bordered Reloop sign on ear cups

TECHNICAL DATA
•Driver: 2x 40 mm
•Frequency Range: 20 Hz ? 20 kHz
•Sensitivity: 118 dB
•Impedance: 32 ohms
•Connector: 3.5 mm stereo jack
•Adaptor: 6.3 mm stereo jack
•Cord: 1.05 m +/-10%
•Weight: appr. 307 g

The OM cartridge for headshell mounting comes with superb sound characteristics and a very sturdy construction that also lends itself to scratching.

FEATURES
•Headshell mounting
•Spherical stylus
•Low vinyl wearout
•Excellent sound characteristics
•Appropriate for scratching
•Sturdy construction

TECHNICAL DATA
•Frequency range: 20 Hz - 22 kHz
•Output voltage (5 cm/s): 4 mV
•Tracking force range: 1,75 - 2,25 g
•Recommended tracking force: 2 g
•Weight: 5 g

The Reloop Modular Stand was designed to exactly fit the performance pad controller Reloop Neon, guaranteeing solid foothold with ideal working height. Ideally, the Reloop Modular Stand is positioned near a turntable, allowing comfortable access to the sample, cue, loop and effect sections. Thanks to convenient snap-in knobs, the Reloop Modular Stand's setup is quick and easy. The stand is also compatible with other modular controllers, effect devices or even the iPad and it can also be used in the studio, in order to position your desktop synthesizer or drum machine at an ideal working height.

FEATURES
• Sturdy stand for modular controllers
• Optimized for Reloop Neon
• Quick and easy setup
• No tools necessary for setup
• Locking via snap-in knobs
• Easy setup in two steps
• Extra flat construction
• Ideal working height: perfect for positioning near turntable
• Also compatible with other modular controllers, effect devices, desktop synthesizers, drum machines or iPad

TECHNICAL DATA
• Dimensions (folded): 261 x 22 x 184 mm
• Dimensions (assembled): 261 x 185 x 184 mm
• Weight: 861 g
• Supply without decoration

The Reloop Laptop Stand V.2 is the enhanced assistant for the installation of laptops or other hardware in a DJ setup. Thanks to the variable width notebooks of all sizes can be set up safely and space savingly.

FEATURES
• Robust and firm laptop stand for digital DJs, musicians and producers
• For all current laptop sizes up to 17''
• Anti-slipping and vibration protection due to especially broad cushion overlays
• 3 different widths due to removable adapter parts
• 4 different heights adjustable
• Mountable on consoles, tables or as stand-alone

TECHNICAL DATA
• Widths: 240 mm, 265 mm or 290 mm
• Heights: 235 mm, 275 mm, 315 mm, 360 mm
• Weight: 2.30 kg
• Supply without decoration
• Incl. 2 screw clamps and 2 stand rails

The Reloop Laptop Stand LTD. is the enhanced assistant for the installation of laptops or other hardware in a DJ setup. Thanks to the variable width notebooks of all sizes can be set up safely and space savingly.

FEATURES
• Robust and firm laptop stand for digital DJs, musicians and producers
• For all current laptop sizes up to 17''
• Anti-slipping and vibration protection due to especially broad cushion overlays
• 3 different widths due to removable adapter parts
• Mountable on consoles, tables or as stand-alone

TECHNICAL DATA
• Widths: 335 mm, 310 mm or 285 mm
• Weight: 2.30 kg
• Supply without decoration
• Incl. 2 screw clamps and 2 stand rails

Sometimes it is the little, simple things in a DJ's life that make the job easier: Reloop's vertically adjustable, foldable Laptop Stand Flex is the right choice when there is not much space in the DJ booth or if you need a light, absolutely sturdy laptop stand for the road. When folded, Reloop''s Laptop Stand Flex can be placed in every equipment bag thus becoming a safe, rugged companion for your club gigs. And thanks to the vertical adjustment it can be adapted to every setup.

FEATURES
• Extremely sturdy laptop stand for digital DJs, musicians and producers
• Optimized for laptops from 13'' - 16''
• Easily foldable in no time
• Paddings avoid slipping of equipment
• Simple assembly in a matter of seconds
• Available in black

TECHNICAL DATA
• Max. load capacity: 8.0 kg
• Dimensions tray: 240 x (max.) 400 x 265 mm
• Dimensions (when folded): 280 x 350 x 62 mm
• Weight: 2.21 kg
• Supply without decoration

•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

Analog and digital worlds collide in the Reloop Concorde Green cartridge, resulting in the perfect unit designed for use with timecode records. Thanks to its high output voltage, it is able to reproduce timecode signals in an especially precise way while the special spherical stylus also reduces vinyl wear.

FEATURES
•Optimized for timecode vinyls
•Special spherical stylus
•Very high output voltage
•Appropriate for scratching
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 20 kHz
•Output voltage (5 cm/s): 8 mV
•Tracking force range: 2 - 4 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

•Excellent for scratching
•Very high tracking ability
•Very low vinyl wearout

The Concorde Blue cartridge system is particularly suitable for scratching, due to the special spherical stylus. With a very high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
•Excellent for scratching
•Special spherical stylus
•Very high tracking ability
•High output voltage
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 6 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

ELITE

• High Performance DVS Mixer for Serato DJ Pro, developed in close collaboration with renowned international turntable artists
• 16 large, velocity sensitive RGB performance pads: Control up to 12 performance modes per deck
• DUAL 24-bit interface & 3x non-contact Innofader Pro with high-resolution technology

POWER UP YOUR PERFORMANCE POTENTIAL
Reloop ELITE is a professional DVS mixer for Serato DJ Pro, developed in close cooperation with international turntable artists. Due to the combination of a performance-oriented layout and powerful features, ELITE allows you to fully realise your DJ potential. The full version of Serato DJ Pro, including the DVS Expansion Pack, is provided plug 'n' play. Additionally, ELITE comes with two Serato control records with NoiseMap™ technology.

DUAL 10 IN/OUT USB 2.0 AUDIO INTERFACE & ERGONOMIC BROWSE SECTION
ELITE comes equipped with a powerful DUAL 10 In/Out USB 2.0 Audio Interface, which offers outstanding sound characteristics in 24-bit resolution. Two computers can be connected at the same time via both USB ports. This way a seamless transition from one DJ to another during performance becomes as easy as possible. In the battle mixer's center you find the ergonomically designed browse section, that allows efficient one-handed control and which can be switched independently from the source selection (USB A or B) via the Focus computer control.

2x OLEDs & DEDICATED LOOP CONTROL
The two OLED displays show real-time information regarding effects, BPM, beat parameters and setup menu. Each deck has a separate loop section which can be controlled intuitively, thanks to the push encoder which also disposes of a manual loop function. Via the LED bar the selected loop length is directly visible.

INDIVIDUAL PAD MODES
In combination with the RP-8000 MK2 it is possible for the first time to control the pad modes on various devices individually and simultaneously.

SMART LINK USB HUB
External devices, such as MIDI controllers, storage media or smartphones can be connected and loaded via the two smart link USB ports. When connecting RP-8000 MK2 turntables, these will automatically recognize the corresponding deck (1 or 2). All of ELITE's control elements are MIDI compatible and can be used to control any compatible software.

STURDY METAL CONSTRUCTION WITH RESISTANT FINISH IN DEEP BLACK METALLIC
Thanks to the sturdy construction of robust metal and high-quality control elements, such as the screwed metal potentiometers, ELITE is built and ready for rough daily life. The two high-retention USB ports guarantee a safe connection and offer protection against unwanted signal loss. The surface is processed with a hard-wearing finish, which is especially resistant against scratches and is finished in a timeless deep metallic black.

INCLUDING BPM SUPREME VOUCHER
With any purchased ELITE the DJ record pool adds a 90 days Premium Membership with a value of 60 $ for their huge audio and video library - containing latest releases directly received from the record labels.

FEATURES
• Professional DVS Performance Mixer for Serato DJ Pro
• Developed in close collaboration with renowned international turntable artists
• Control up to 12 performance modes per deck
• 3x mini Innofader Pro (latest generation) on-board, featuring twice the resolution and innovative non-contact technology, allowing for ultra precise cuts and smooth operation
• 2 high-contrast OLED displays showing real-time information of effects, BPM, beat divisions and setup menu
• Colour-coded Tweak FX: stand-alone effects with bipolar control
• Toggle between Filter, Crush, Flanger, White Noise and user mode via the mode button with RGB indication
• DUAL 10 In/Out USB 2.0 audio interface with superb sound quality in 24-bit
• Two independent effect units for controlling Serato DJ Pro FX
• 3 assignable effect slots: each with dedicated activation buttons
• Dedicated and flexible effect controls for each channel
• Mini-fader for FX Level/Depth control
• 2 FX activation modes: either hold or toggle on/off
• Combines a performance-oriented layout with powerful features
• 16 large, velocity sensitive RGB performance pads
• 4 mode buttons, three layers with 12 performance modes (Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Slicer Loop, Saved Flips, Platter Play, Transport, user mode and the brand new scratch bank mode) and dual layer parameter buttons per side
• Performance pad modes can be controlled independently on each deck
• Enhanced performance with RP-8000 MK2 turntables: for the first time, pad modes can be controlled individually on each device simultaneously
• Customisable fader curves and reverse function (hamster switch)
• Digital adjustment of cut in/out points in the setup menu
• Dedicated loop section with push encoder, loop length LED bar & manual loop control
• Ergonomically designed browse section for efficient one-handed use
• Convenient cue fader system with dedicated controls for volume and mix
• Easily switch between 2 computers using the Focus PC controls
• Extensive USB routing capabilities: sampler and AUX channel can be individually routed through the Serato FX units (send/return)
• 3-band isolator EQ with full kill characteristic
• Smart Link USB ports: auto RP-8000 MK2 deck recognition
• Can also be used as an active USB hub for external devices
• Mic/line input with 2-band EQ, independent echo effect and on/off talkover switch
• 2 headphone outputs via 6.3/3.5 mm stereo jack
• Booth ouput in stereo or mono
• MIDI-compatible control elements
• High retention USB ports
• Rock-solid construction in a durable metal design
• High-quality and hard-wearing deep black, metallic finish
• Kesington Lock to secure the device
• Incl. full version of Serato DJ Pro with DVS Expansion Pack, 2x Serato Control Vinyls with NoiseMap™ technology, USB cable, power cord, operating instructions and 90 days BPM Supreme membership

TECHNICAL DATA
• Frequency response: 20 Hz - 20 kHz
• Inputs: 2x phono RCA, 2x line RCA, AUX RCA, mic/line TRS, 2x Smart - Link USB ports (type A), 2x USB ports (type B)
• Outputs: Master XLR (balanced), master RCA (unbalanced), booth TRS (balanced), rec RCA (unbalanced), headphones 6.3/3.5 mm stereo jack
• EQ range at 70 Hz, 1 kHz, 13 kHz: -∞ dB (total kill)/+9 dB
• EQ range Mic at 100 Hz, 10 kHz: -12 dB/+12 dB
• Dimensions: 290 (w) x 414 (d) x 107.5 (h) mm (potentiometers: 18.5 mm)
• Weight: 6 kg
• Software requirements: Serato DJ Pro 2.1.2

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238128_Reloop_IM.pdf

Dust Cover RP-1000/2000/4000/ +MK2

FEATURES
• Hinged dust cover
• Suitable for Reloop RP-1000/2000/4000 MK1 and MK2
• Sturdy rigid plastic cast

TECHNICAL DATA
• Dimensions: 442 x 68 x 348 mm (358 hinge seat)
• Incl. two hinges

OFFERED IS JUST THE DUST COVER WITHOUT TURNTABLE!

Smooth running of the record ensures high sound quality without acoustic disturbances. Our aluminum record stabilizer weighs 420 g and distributes the weight evenly on the record. The increased contact pressure of the vinyl on the turntable ensures more even scanning.

You can use the Stabilizer universally for all turntables. We deliver the weight including a box for safe storage.

Vinyl Care by HHV was developed for the special needs of passionate vinyl collectors. Each product incorporates the experience and wishes that we at HHV have gathered in countless conversations with customers. All Vinyl Care products are delivered in stylish packaging and are also suitable as a gift idea for record lovers.

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: black
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: silver
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

Uncompromised heavyweight design combined with high-end features. The big brother of our X1 sets new standards.

Real high-end features.

Azimuth & VTA - Fully adjustable
The X2 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X2 as you want it.

Pick it 2M Silver - High-end cartridge
This cartridge uses internal silver plated copper coils, which guarantees outstanding sonic results! The X2 is available with or without the Pick it 2M Silver.

2 kg Platter - Resonance free acryl
The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character.

33/45/78 RPM - High precision motor control
A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button.

New motor suspension
A good motor by itself, is already very quiet. To get the best performance out of it, we have improved the motor suspension. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt - this way the motor chassis is effectively decoupled from the main plinth for optimal performance.

The Tonearm - 9'' Carbon-Aluminium Tonearm
Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight.
Compared with its little brother the X1, the tonearm is longer - 9“ in length - and the tube has a wider diameter. The carbon/aluminium sandwhich construction results in better internal damping. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges.

Metal Feet - Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Phono Cable - Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Technical Specifications:
•Speed: 33, 45, 78 (electronic speed change)
•Principle: belt drive
•Speed variance: 33: 0.25% 45: 0.20%
•Wow & flutter: 33: 0.12% 45: 0.10%
•Signal to noise: 70 dB
•Platter: 30mm thick, 2 kg heavy acryl
•Main bearing: stainless steel/brass
•Tonearm: 9” carbon/aluminium sandwich
•Effective arm length: 230 mm
•Overhang: 18 mm
•Effective tonearm mass: 13,5g
•Tracking force range: 0 - 30mN
•Included accessories: 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
•Power consumption: 4,5 watts max / 0.3 watt standby
•Dimensions: 460 x 150 x 340 mm (WxHxD)
•Weight: 10 kg

Manual: https://www.project-audio.com/wp-content/uploads/2021/01/X2-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Stabilize your records

Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

OPTIMIZED PLAYBACK OF YOUR RECORDS
This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications:
• Material: Nickel-plated aluminium
• Weight: 190g
• Diameter: 78mm
• Height: 16mm

High-end turntable with 9" evo tonearm

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4 mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/ plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. An Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces.

Supplied either with or without a premium Quintet Blue cartridge, manufactured by the cartridge experts at Ortofon, it can be ready to play within a few minutes of unboxing. Supplied counterweights are suitable for cartridges weighing between 5-14 g. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use.

In the box:
•PerspeX SB without Ortofon Quintet Blue Cartridge
•Connect it E RCA Cable
•Dust cover
•Record clamp
•Adapter for 7“ singles
•Power supply, spirit level

Features:
•Acrylic Plinth
•Sub-chassis made from Corian with magnetic suspension
•Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat
•Inverted main bearing with ceramic ball/plate
•Belt drive with AC motor with DC driven AC generator
•Electronic speed control with 33/45 rpm switching
•Pre-mounted 9" tonearm 9 cc Evolution
•Tonearm bearings with ABEC 7 ballraces

Technical Specifications:
•Speed: 33, 45 (electronic speed change)
•Principle: Belt drive
•Platter: 300 mm MDF/vinyl Sandwich
•Main bearing: Inverted stainless steel with ceramic ball/plate
•Wow & flutter: 33: +/- 0.60% 45: +/- 0.60%
•Speed variance: 33: +/- 0.10% 45: +/- 0.10%
•Signal to Noise: 73 dB
•Tonearm: 9” cc EVO, Carbon
•Effective arm length: 230 mm
•Effective tonearmmass: 8.0 g
•Overhang: 18.0 mm
•Tracking force range: 10 - 35 mN
•Included accessory: 15 volts DC / 800 mA power supply, dust cover
•Power consumption: 6 Watts max / < 0.3 Watt standby
•Dimensions: 460 x 183 x 365 mm (WxHxD)
•Weight: 11.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/04/Manual_6Perspex-SB.pdf

Electronic stylus balance

The Measure it E Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus tracking forces up to 5.0 grams in 0.002 gram increments. Each Measure it E can easily be calibrated using the supplied calibration weight and by pushing a button. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight (5 g)
• 2x LR43 (AG12) button cell batteries + 2 pieces as backup
• protection pouch for the meter
• user guide

Features:
• 4 digit LCD display with backlight
• 4 weighing modes
• Wide capacity 0 - 5g
• Calibration weight
• Precision data readouts with low variance
• Auto calibration function
• Auto power off after 30 seconds
• Low power consumption
• Button cell batteries included

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,002g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) & carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: auto calibration using a 5g weight
• Auto off: 30 seconds off
• Replacement battery: 2 x LR43 (AG12) button cells, 1,5V
• Operating temperature: +10 - +30° C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 96 x 21 x 43mm
• Weight: 49g

Spirit level

Spirit level for optimum positioning of a turntable.

After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raises the bar even higher.

A MILESTONE FOR THE NEXT DECADES
The Debut PRO brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.
The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality.

The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function.

DEEPLY DRIVEN
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.

A NEW PLATTER – A DEEPPER DISH
The new Debut PRO platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO has to offer!
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO.

HYBRID TONEARM
The new Debut PRO features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges!

AZIMUTH & VTA ADJUSTMENT
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

Features:
Pick it PRO
Lively and robust sound
The perfect combination of components is the key to achieve the great sound of the Pick it PRO.

Nickel Coating
Sustainable components
The nickel finish of the aluminium components results in a hard, resistant surface.

Hybrid Tonearm
Carbon Aluminium Sandwich
This super stiff and uniquely dampened tonearm ensures perfect tracking of the record groove.

VTA & Azimuth
Fully adjustable
The Debut PRO comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.

33/45/78 RPM
High precision motor control
The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.

Bearing block
Complete new design
The precision CNC milled and nickel coated tonearm bearing parts are completely new and designed just for the PRO.

Special Platter
TPE damped & anti magnetic
The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.

Metal Feet
Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Technical Specifications:
• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt drive with electronic speed control
• Platter: 300mm, die cast aluminium platter with TPE damping and felt mat
• Platter bearing: high precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
• Speed drift: 33: +/-0,40%; 45: +/-0,50%
• Signal to noise: 68dB
• Tonearm: 8,6” one-piece carbon-aluminium tonearm
• Effective arm length/mass: 218,5 mm / 10,0 g
• Overhang: 18,5mm
• Included accessories: 15V DC / 0,8A power supply, dust cover, 78 RPM round belt, 7‘‘ single adapter
• Power consumption: 4W / 0W standby
• Dimensions: 415 x 113 x 320mm (WxHxD)
• Weight: 6 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2021/07/PJ-Phono-DebutPro-Manual.pdf

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf