DJ Equipment 1824 Items

The 45 Twister is the ultimate tool for every DJ playing 45 singles (7“). This product guarantees that the 7 inches are able to scratch, mix and cut perfectly as a 12 inch! Beatjuggling, contest scraching – no problem anymore! The 45 Twister works on every turntable, because it is a precision product made in EU of best stabile material, perfect measured 45 compatible, plus a super soft-rubber surface mat. This high grade tool guarantees the fastest and safest way to play your 7 inches. The 45 Twister was developed and designed by DJ Enne. The base colour of the 45 Twister is: Transparent with slight glitter!

Approved by Florian Keller, DJ Mirko Machine, Jon Kennedy & others!

Just in case the middle hole is tight:
Take a scissor , put it from bottom in the hole, screw it 2-3 time slightly, test it, if still too tight, repeat it. Then it should fit perfectly.

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The UDG Digi BackPack was specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style. A cleverly designed side entry compartment for a laptop up to 15.4 inch allows access without having to rummage through the main body of the bag. The spacious main compartment can hold an extra laptop or used for magazines/paperwork whilst in transit.
The front compartment features a detachable interface pouch and accessories organizer pocket. There are also 5 additional exterior pockets that provide storage for personal items, one of these has an ear bud access point with a hinged storage pocket so that you can listen to your mp3 player whilst on the go.

UDG Digi BackPack - specifications:

• water resistant nylon 450D shell
• easy access size entry padded compartment for 15.4 inch laptop with vertical file organization
• main compartment for laptop, LPs, books or magazine
• front compartment with organization panel and detachable pouch for audio interface
• 5 exterior pockets for personal essentials, including one with ear bud pass-through for mp3 players and unique hinged headphone pocket
• S-curved shoulder straps for ultimate comfort
• outer dimensions: approx. 33.5 x 48 x 27 cm (13.2 x 18.9 x 10.6 inch)
• inner dimensions: approx. 30 x 42 x 13 cm (11.8 x 16.5 x 5.1 inch)
• weight: 1.8 kg (4 lbs)

Inspired by the legendary UDG Producer Bag, the UDG Ultimate Producer Bag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

The UDG Producer Bag Large offers increased space for performers using laptops up to 18.4 inch and larger MIDI controllers.

Constructed from high quality fabrics, the backpack style UDG Producer Bag Large features padded walls with an adjustable divider so that you can create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

UDG Producer Bag Large - specifications:

Weight 3,25 kg / 7.15 lbs
EAN 8717228276675
Color Black, Orange inside
Outer Dimensions (W x H x D) cm: 46 x 56 x 25 | inch: 18.1 x 22 x 9.8
Inner Dimensions (W x H x D) cm: 32 x 46.5 x 15 | inch: 12.6 x 18.3 x 5.9
Material Water Resistant Nylon 420D
Protection Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.
Extra's 6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.
Fits Up to 18.4" laptop,
Pioneer Toraiz SP-16, DJS-1000, DJM-750MK2,
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2,
Denon DJ Prime Go, MC6000 MK2, MC3000,
Numark iDJ Live II, Mixtrack II / Pro II,
Rane Seventy, Seventy-Two,
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32,
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2,
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25,
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S,
M-Audio Oxygen 25, Trigger Finger Pro, Xponent,
Stanton SCS.4DJ, DJC.4,
Livid OHM 64,
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25,
various pedalboards,

Thanks to its adjustable Height the Adam Hall Laptop Stand will offer every DJ flexibility to the fullest!

• Material: Steel
• Material Thickness: 2 mm
• Surface: Black coated
• Height: adjustable 165 - 280 mm
• Adapted for all laptop formats (12" – 17")

Ausgangsspannung bei 1000Hz, 5cm/sec.
6 mV
Kanalbalance bei 1kHz
2 dB
Kanaltrennung bei 1kHz
23 dB
Kanaltrennung bei 15 kHz
15 dB
Frequenzbereich bei -3dB
20-22.000 Hz
Frequenzgang
20-20.000 Hz +/- 2 dB
Rillenfestigkeit bei 315 Hz mit empfohlener Auflagekraft
80 μm
Nadelnachgiebigkeit, dynamisch, seitlich
9 μm/m N
Nadeltyp
Special Elliptical
Durchmesser Nadelspitze
r/R 13/25 μm
Auflagekraftbereich
2,0-4,0 g (20-40 mN)
Auflagekraft empfohlen
3,0 g (30 mN)
Tracking Neigung
20°
Interne Impedanz, Gleichspannungswiderstand
750 Ohm
Interne Induktion
450 mH
Lastwiderstand empfohlen
47 kOhm
Belastungskapazität empfohlen
200-600 pF
Tonabnehmergewicht
18,5 g

The world's first needle designed specifically for coded vinyl with low wear!

The DigiTrack is the perfect marriage of easy and function. You can now manupulate MP3's with the style and feel of a turntablist and the tradition of a turntable.

The DigiTrack responds to the generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

High output and the best mix and scratch ability!

Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +3 dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
• -
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
•
Internal impedance, DC resistance
•
Internal inductance
•
Recommended load resistance
•
Recommended load capacitance
•
Cartridge weight
18,5 g

Techno cartridge co-designed by DJs. Rubber tube especially developed for scratch and back-cueing. Very high output. Every professional ought to try the Electro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches. Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio. Unaffected by extreme sound pressure and repeated vibrations, it has a high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.

Ortofon Elektro Replacement Styles - Specs:

Output voltage at 1000Hz, 5cm/sec.
7.5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

black slipmat with white logo and weapon

black slipmat with mirrored white writing

The Ortofon Fingerbügel is a rubber coat for all Concorde cartridges to avoid the slipping of the tone arm. 2 pieces included.

Co-designed by DJ Q.Bert for scratch and back-cueing. High tracking ability. Ultra high output

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own.

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Output voltage at 1000Hz, 5cm/sec.
11 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
•
Frequency range at -3dB
20-18.000 Hz
Frequency response
20-18.000 Hz -3 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.680 Ohm
Internal inductance
920 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-400 pF
Cartridge weight
18,5 g

black slipmat with white headphone logo

CLARITY AND COMFORT FOR THE MODERN DJ

One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.

If you love your vinyl goodies, you'll brush 'em with the Velvet Brush to clean and dust 'em. Also, this tool eliminates most of the static charge, so there's no chance for dust to make itself comfortable on the grooves. Mini saphir brush to clean the velvet surface also included.