DJ Equipment 1898 Items

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet

AT-VMN95ML
VM95 SERIES MICROLINEAR REPLACEMENT STYLUS
Aluminium cantilever
Microlinear Stylus
Nude Square Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound

The name 2M was selected from several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.
We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue Series features:

an improved engine, which provides an increased output of 5.5mV
Nude Elliptical diamond and split pole pins with a copper wire

Technical data:
• Frequency range 20-25.000 Hz
• Frequency response 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 80 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Nude Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Blue

Audiophile MM Cartridge

Lively & robust with a high dynamic range

Intensive research, development and listening tests have been necessary to gain the the desired sound from the new Pick it PRO.

THE DIFFERENCE IN SOUND
Cartridges are electromechanical transducers, where mechanical energy is transformed into an electrical signal. The real difference in sound happens here. The colour and life of the music come from the cartridge.
You cannot judge the cartridge by looking at just one specific part. Experience and the art of fine-tuning make a cartridge unique and special. The perfect combination of components is the key to achieve the great charismatic sound of the Pick it PRO.

Technical Specifications:
• Cartridge principle: MM (Moving-Magnet)
• Output voltage at 1 kHz: 4 mV
• Channel separation at 1 kHz: 22 dB
• Tracking ability at 315Hz: 70 μm
• Frequency response: 20 - 20 000 Hz +/- 2dB
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μm
• Tracking force, range: 1,8 - 2,2 g (mN)
• Tracking force, recommended: 2,0 g (mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 750 Ohm
• Internal inductance: 450mH
• Recommended load resistance: 47kOhm
• Recommended load capacitance: 150-300pF
• Cartriddge weight: 7,2 g

Replacement stylus Nagaoka JTS-80LB for the pickup JT-80LB.

AT-VM95EN vormontiert auf Headshell AT-HS6BK
• Das Tonabnehmer-Set AT-VM95EN/H wird im Audio-Technica Werk in Fukui (Japan) vormontiert, getestet und verpackt.
Gesamtgewicht 15,5 g

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

The RIOT DJ-BACKPACK is the latest and most compact model of the RIOT line. It was especially designed for digital-DJs travelling with a basic DVS setup such as 15” laptop, Timecode records and accessories or small controllers.
The clever interior layout of the main compartment includes two padded, removable dividers which allowing for three separate protective compartments and the featured “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.

FITS
13-15‘‘ Laptop
NI Maschine
NI Kontrol X1
NI Kontrol F1
NI Kontrol D2
Ableton Push 2
12“ Vinyl
Accessories

BASICS
Crafted from durable and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Soft-fleece lining
Lockable zippers on main and laptop compartment
Rubber corner protectors and rubber feet
Main compartment includes two padded, removable dividers
The “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.
Separate side entry compartment provides quick access to your 15,4’’ laptop
Two internal hanging mesh accessory pockets comfortably fill out the upper area of the backpack
Large front pocket with internal pouches and organizers
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand luggage compatible

SPECS
+ Outer dimensions: (H/B/T): 53 x 33 x 16-22 cm
+ Inner dimensions: : 40 x 31 x 12-16 cm
+ Weight: 2,2 kg

This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Detachable cable (3 cables included)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Frequency Response: 15 - 28,000 Hz
• Max Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Folding/collapsible: Yes
• Weight: 10 oz (284 g) without cable/connector
• Cable - Detachable: Yes
• Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Accessories included: Screw-on 1/4” adapter, pouch

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

FEATURES

Inputs: two phono/line switchable (RCA), two line (RCA), mic (1/4")
Outputs: Master (RCA), Record (RCA), Headphone (1/4" stereo)
Three-band EQ and gain on each channel
EQ and gain on mic channel
Replaceable crossfader with reverse and slope-controls
Crossfader-style cueing

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Product Dimensions: 11.4" x 9.5" x 3.6"

Manual: http://www.numark.com/images/product_downloads/m2_quickstart_guide_v1_0.pdf

Get up and running quickly at any gig.

READY FOR DIGITAL OR ANALOG

DJs always need a dependable mixer. M101USB fits the bill perfectly as a highly adaptable two-channel mixer for virtually any DJ. M101USB lets you get up and running quickly whether you’re using a computer, turntables or CDs. M101USB is right at home at weddings, parties, clubs and everything in-between.

MIX YOUR MUSIC YOUR WAY

Beginners and seasoned DJs alike who want a durable USB-equipped two-channel solution will find M101USB a perfect fit. M101USB builds on the two-channel M101 mixer with the addition of an easy-to-use USB audio interface for DJs who want the option of working with their computer as well as traditional analog I/O.


TWEAKABLE TUNES

Beyond simply mixing, M101USB has a built-in EQ so that you can fine tune your mix depending on the room or the tracks themselves. Two pairs of switchable Phono/Line inputs are included along with a crossfader, ¼” mic input and stereo RCA line output for connection to an amplifier, powered speakers or another mixer. M101USB can be rack-mounted and features Numark’s legendary industrial-grade durability.

GET CONNECTED

Connecting M101USB to your computer is a snap using a single USB cable. Once connected you can use your computer as an audio source or record your sets straight to your computer's hard drive. If you're a computer DJ on the move and need solid, dependable two-channel performance, look no further than the M101USB mixer.

FEATURES

Two-channel rack-mountable mixer with USB
USB audio built in for playing from or recording to your computer
Two pairs of Phono/Line inputs
Built-in 2-band EQ for quick, easy sound tweaks
1/4-inch Mic input for voiceovers and announcements
Stereo Output for easy connection to amps, powered speakers or another mixer
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M101USB Mixer
Power Supply
Quickstart Guide

Manual: http://www.numark.com/images/product_downloads/m101usb___quickstart_guide___v1.0.pdf

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Intuitive Smart Features and Elegant Design

Compact yet powerful 6mm drivers and a special acoustic structure with active noise cancellation deliver clear sound wirelessly — wherever your busy day takes you. Seamless device switching and crisp call clarity in a comfortable design – you won't miss a beat.

Elegant & All-Day Comfort Design
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.
Low-profile design for comfort throughout the day, and balanced to stay put – even when you're on the go.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Clear and detailed sound delivered wirelessly through the unique acoustic chamber, harmoniser, and compact 6mm drivers. Compatible with LDAC™ high-res wireless audio.*
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Sound Clarity
Enjoy pure sound. The Feed Forward Mic captures environmental sound and Digital Processing removes noise in addition to Passive Noise cancelling with the earplug effect.

Never miss a beat.

Intuitive Smart Features

Beamforming Technology
Clear calls using Beamforming Technology to capture and transmit your voice clearly despite surrounding noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 5.5 hours* playback with ANC on, 18 hours back-up with the case. Quick charge for 15 minutes will give you 60 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Clear rich sound from a unique acoustic chamber, harmonizer, and 6mm drivers.
• Pure Sound from Active Noise Cancelling with a Feed Forward Mic.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• Clear calls using Beamforming Technology to capture and transmit your voice.

Technical Data:
GENERAL
• Driver Unit (mm): 6 mm (1/4 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 3.5 hours (NC ON)
- Approx. 4.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 12 hours (NC ON)
- Approx. 14 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 5.5 hours (NC ON)
- Approx. 7.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 18 hours (NC ON)
- Approx. 24 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: -
- Earphones with Charging case / USB: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: -

• Quick Charge (15 minutes, AAC)
Earphones:
- Approx. 60 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9.5 hours (NC ON),
- Approx. 20 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 22 mm x 26 mm x 24 mm
- Approx. 7/8 inch x 1 inch x 15/16 inch
Charging case:
- Approx. 68 mm x 33 mm x 28 mm
- Approx. 2-11/16 inch x 1-5/16 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 5 g (0.18 oz)
- Charging case: Approx. 35 g (1.2 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS, S, M, L (M attached)

Advanced Function
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes(Feed-Forward only)

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Intuitive Smart Features and Elegant Design

Compact yet powerful 6mm drivers and a special acoustic structure with active noise cancellation deliver clear sound wirelessly — wherever your busy day takes you. Seamless device switching and crisp call clarity in a comfortable design – you won't miss a beat.

Elegant & All-Day Comfort Design
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.
Low-profile design for comfort throughout the day, and balanced to stay put – even when you're on the go.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Clear and detailed sound delivered wirelessly through the unique acoustic chamber, harmoniser, and compact 6mm drivers. Compatible with LDAC™ high-res wireless audio.*
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Sound Clarity
Enjoy pure sound. The Feed Forward Mic captures environmental sound and Digital Processing removes noise in addition to Passive Noise cancelling with the earplug effect.

Never miss a beat.

Intuitive Smart Features

Beamforming Technology
Clear calls using Beamforming Technology to capture and transmit your voice clearly despite surrounding noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 5.5 hours* playback with ANC on, 18 hours back-up with the case. Quick charge for 15 minutes will give you 60 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Clear rich sound from a unique acoustic chamber, harmonizer, and 6mm drivers.
• Pure Sound from Active Noise Cancelling with a Feed Forward Mic.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• Clear calls using Beamforming Technology to capture and transmit your voice.

Technical Data:
GENERAL
• Driver Unit (mm): 6 mm (1/4 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 3.5 hours (NC ON)
- Approx. 4.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 12 hours (NC ON)
- Approx. 14 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 5.5 hours (NC ON)
- Approx. 7.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 18 hours (NC ON)
- Approx. 24 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: -
- Earphones with Charging case / USB: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: -

• Quick Charge (15 minutes, AAC)
Earphones:
- Approx. 60 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9.5 hours (NC ON),
- Approx. 20 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 22 mm x 26 mm x 24 mm
- Approx. 7/8 inch x 1 inch x 15/16 inch
Charging case:
- Approx. 68 mm x 33 mm x 28 mm
- Approx. 2-11/16 inch x 1-5/16 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 5 g (0.18 oz)
- Charging case: Approx. 35 g (1.2 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS, S, M, L (M attached)

Advanced Function
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes(Feed-Forward only)

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Intuitive Smart Features and Elegant Design

Compact yet powerful 6mm drivers and a special acoustic structure with active noise cancellation deliver clear sound wirelessly — wherever your busy day takes you. Seamless device switching and crisp call clarity in a comfortable design – you won't miss a beat.

Elegant & All-Day Comfort Design
Built to last, with a pleasing and reassuring tactile quality for both earphones and charging case.
Low-profile design for comfort throughout the day, and balanced to stay put – even when you're on the go.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*LDAC playback not possible with 3 devices.

Signature Technics Clear Sound
Clear and detailed sound delivered wirelessly through the unique acoustic chamber, harmoniser, and compact 6mm drivers. Compatible with LDAC™ high-res wireless audio.*
*Delivered in 96 kHz/24-bit LDAC, when connected by Bluetooth® to a compatible device.

Pure Sound Clarity
Enjoy pure sound. The Feed Forward Mic captures environmental sound and Digital Processing removes noise in addition to Passive Noise cancelling with the earplug effect.

Never miss a beat.

Intuitive Smart Features

Beamforming Technology
Clear calls using Beamforming Technology to capture and transmit your voice clearly despite surrounding noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 5.5 hours* playback with ANC on, 18 hours back-up with the case. Quick charge for 15 minutes will give you 60 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Comfortable and Secure Fit
Low-profile ergonomic design, for a comfortable and secure fit. Ideal for long journeys.

100% Plastic-Free Packaging
Supplied in new compact packaging that dispenses with plastic and other hard-to-recycle finishes.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Clear rich sound from a unique acoustic chamber, harmonizer, and 6mm drivers.
• Pure Sound from Active Noise Cancelling with a Feed Forward Mic.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• Clear calls using Beamforming Technology to capture and transmit your voice.

Technical Data:
GENERAL
• Driver Unit (mm): 6 mm (1/4 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC)
Earphones:
- Approx. 3.5 hours (NC ON)
- Approx. 4.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 12 hours (NC ON)
- Approx. 14 hours (NC OFF)

• Playback Time with Battery (AAC)
Earphones:
- Approx. 5.5 hours (NC ON)
- Approx. 7.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 18 hours (NC ON)
- Approx. 24 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: -
- Earphones with Charging case / USB: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: -

• Quick Charge (15 minutes, AAC)
Earphones:
- Approx. 60 minutes (NC ON)

• Standby Time
Earphones:
- Approx. 9.5 hours (NC ON),
- Approx. 20 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D)
Earphones *with Earpiece M size:
- Approx. 22 mm x 26 mm x 24 mm
- Approx. 7/8 inch x 1 inch x 15/16 inch
Charging case:
- Approx. 68 mm x 33 mm x 28 mm
- Approx. 2-11/16 inch x 1-5/16 inch x 1-1/8 inch

• Weight
- Earphones (one side only: L and R are the same): Approx. 5 g (0.18 oz)
- Charging case: Approx. 35 g (1.2 oz)

• Supplied Accessory
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS, S, M, L (M attached)

Advanced Function
• Bluetooth® Wireless Technology
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes(Feed-Forward only)

The 2M 78 features an improved engine, which provides a high level of sonic accuracy. The stylus' tip is a Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile. The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M 78 uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.

The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M 78 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 18 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 65 µm
• Tracking force range - 1.6-2.0g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Internal impedance, DC resistance - 700 Ohm
• Internal inductance - 350 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Tracking angle - 20°
• Cartridge colour, body/stylus - Black/Grey
• Cartridge weight without screws - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M 78 (interchangeable with 2M Mono)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

In addition to the record and register boxes, Record Box has a special offer for vinyl collectors and lovers of modern furniture systems: With the highboard set consisting of 4 boxes for 12-inch records + top & baseboards, customers benefit from attractive price savings compared to purchsing the boxes separately.
The sets are particularly interesting for collectors who already have a large number of records and want to get a lot of storage space for an attractive price. The record boxes as part of this set offer space for approx. 450 12-inch records.
The highboard set is available in classic white and black, can be expanded as required and individually supplemented with other products from the Record Box furniture system to create unique pieces of furniture. Whether as a DJ rack, hi-fi furniture, room divider or record shelf - the possible uses of the highboard are almost unlimited.
The set consists of four record boxes that are placed on a baseboard. A top board forms the upper end with a smooth, straight surface.
The unique furniture system from Record Box stands for diversity, which allows vinyl collectors to realize their individual wishes for the storage and presentation of their records. Like all furniture in the Record Box System, the boxes and boards are made of high-quality MDF, which has been covered with a robust layer of melamine. Innovative adhesive dots reliably protect against slipping. A wall mounting set is available in the shop for additional security.

4 boxes for 12 inch records + top & baseboards
Technical details & components set:
• Dimensions of the furniture in total: approx. 72.3 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard small
• 4x 12-inch 110 storage boxes
• 2x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

The TTW10H is our turntable weight which combines two needful features for every vinyl DJ:
A disc stabilizer and an adapter for 7“ records.
The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

OUR HANDCRAFTED TURNTABLE WEIGHTS WORK EITHER FOR 12“ AND 7“ RECORDS.

Our turntable weights feature a smart mechanism: The 7“ adapter inside the weight is moveable- as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10H. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10H comes in a neat printed box with a linen bag to take it out to your gigs.

The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

STAINLESS STEEL BODY WITH A SOLID BRASS CORE.

• DIMENSIONS: Ø75mm × 33mm (Ø2.9 × 1.3 inches)
• WEIGHT: 808g (1.78 lbs)

Handmade in Switzerland

Video: https://youtu.be/e1be_0Ijhms
https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

When you start collecting records you don’t immediately need a cabinet that can hold hundreds of records. Start small with the handy and high-quality Wiltshire furniture piece. The black wire frame makes it a sleek and minimal design. The rack at the front of the Wiltshire has room for about 10 albums. The Mango wooden frame is sturdy for a stable positioning of the turntable.

Specifications:
• Real mango wood
• White washed wood
• Individually hand finished
• Black wire storage
• Holds up to 10 Albums
• Wire record slots for record storage
• No assembly needed
• Material: MDF with Mango-coloured veneer finish, steel slots
• Weight: 5,8 kg
• Dimensions (LxWxH): 48.26 cm x 35.56 cm x 50.8 cm

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 4,60 kg / 10.12 lbs
• EAN: 8717228279959
• Outer Dimensions (W x H x D): 92.2 x 49.2 x 16.0 cm | 36.3 x 19.4 x 6.3 inch
• Inner Dimensions (W x H x D): 91.0 x 48.0 x 8.5 cm | 35.9 x 18.9 x 3.3 inch
• Material: Durashock molded EVA foam

Protection:
• Water repellent laminated nylon exterior
• Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• Pioneer DDJ-REV7, XDJ-RX3, DDJ-RZ, DDJ-SZ2, DDJ-SZ

High-Fidelity Closed-Back Headphones
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A550Z high-fidelity headphones deliver a premium high-fidelity sound performance.

High-Fidelity Art Monitor Series
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A550Z high-fidelity headphones deliver a premium high-fidelity sound performance. Featuring newly designed large 53mm drivers and distinctive matte black design.

Audiophile-Quality
Newly designed 53mm drivers for audiophile-quality acoustic performance.

Comfortable Fit
Premium, soft earpads provide a comfortable fit for long listening periods.

Extended Bass Frequency Range
Double Air Damping Structure (D.A.D.S.) optimises the internal airflow to provide an extended bass frequency range for deep bass reproduction.

Enhanced 3d Wing Support
Redesigned, self-adjusting 3D Wing Support Housing that perfectly adapts to the user’s head for a closer, more stable fit providing extra comfort for long listening periods.

Premium Earpads
Offering a comfortable fit for long listening periods, the A550Z headphones include premium, soft earpads.

Back To Black
The A550Z comes in a distinctive matte black finish.

Tangle-Free Cable
Includes a 3.0m tangle-free cable.

Features:
• New 53mm large drivers for high-fidelity audio performance that offers both power and detail
• Innovative 3D wing support for a great fit and long-wearing comfort
• Distinctive matte black finish
• Premium, soft earpads for comfortable fit
• Double Air Damping System structure provides an extended frequency range for deep bass reproduction
• 3.0 m tangle-free cable

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 – 35,000Hz
• Maximum Input Power: 1,000mW
• Sensitivity: 100dB/mW
• Impedance: 40 ohms
• Weight: 300g (without cable)
• Cable: 3.0 m
• Connector: 6.3/3.5 mm gold-plated stereo 2-way plug

The UDG Ultimate Backpack Slim is a light weight, slim fit backpack for DJ’s that require a smaller version of UDG’s larger size backpacks. Constructed from high quality water resistant Nylon it contains a padded 17” laptop compartment with added neoprene iPad/tablet pocket. The zipper expandable main padded compartment can hold a Numark PT01 Scratch portable turntable or Pioneer DJM-S9 mixer and a few 7" & 12” tone control/scratch vinyl and some clothing. There are enough zipped compartments to securely store microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories. This bag comes with a built in outside USB charger connector, a quick access headphone pocket, ergonomic back padding, comfortable moisture absorbent shoulder straps and a sling so you can slide it on every UDG trolley.

Weight 1,40 kg / 3.08 lbs
Outer Dimensions (W x H x D) cm: 32 x 44 x 23 | inch: 12.6 x 17.3 x 9
Inner Dimensions (W x H x D) cm: 29.6 x 41.6 x 9.3 | inch: 11.6 x 16.4 x 3.6
Material Water Resistant Nylon 450D
Protection Padded 17” laptop compartment with added neoprene iPad/tablet pocket
Compartments to securely store microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories
Padded haul carry handles.
Extra's Zipper expandable main compartment
Outside USB charger connector
Quick access headphone pocket
Soft padded carry handle
Ergonomic back padding
Comfortable moisture absorbent shoulder straps
Trolley sling for easy transport
Fits up to 17" laptop,
Pioneer DDJ-XP2, DDJ-200, DJM-S7, DJM-S9, DJM-S3, DJM-450, DJM-250MK2, DDJ-WeGO3/4, DDJ-XP1, Toraiz Squid,
NI Maschine Jam/ MK2/ MK3, Traktor Z2,
Denon DJ Prime Go, MC2000,
Akai MPC Live/ II, MPD226,
Numark Scratch, PT01 Scratch, Omni Control, Party Mix, Stealth Control,
Reloop Elite, Beatmix, Digital Jockey III, KUT, Mixage IE,
Rane Empath, MP 2014, Sixty One, Sixty Two/Two Z, TTM 56S, TTM 57 MKII, TTM 57SL,
Novation Twitch,
Roland MC-202, TR-707, TR-8, TR-8S, Aira MX-1,
M-Audio Oxygen 25,
Mixars DUO MKII,
Gemini FirstMix Pro, Slate2, Slate4,
Hercules DJ Console 4-Mx, DJ Control Air S Series, DJ Control Wave, P32 DJ Controller, Universal DJ,
Livid CNTRL:R,
Arturia Drumbrute, Drumbrute Impact,
Vestax SPIN/ 2, TR-1, TYPHOON, VCI 100, VCI 300, VCI-100 MK2, VCI-300 MK2,
Microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs