DJ Equipment 1810 Items

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 г (12.5-17.5 мН)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 310 Universal
*) Typical value

Wireless Over-Ear Headphones

The ATH-M20xBT over-ear wireless headphones include all the features you want and the audio quality you demand. Inspired by our #1 selling ATH-M20x wired professional studio headphones and featuring powerful 40 mm drivers for enhanced low-frequency performance, the ATH-M20xBT Bluetooth headphones deliver an incredible listening experience with full-range, high-fidelity audio and enhanced bass.

Enjoy a sonic signature tuned to reflect our wired studio monitor headphones wherever you go. The ATH-M20xBT has a multipoint pairing capability that lets you connect wirelessly to two devices, optimal for multimedia use. The wireless headphones are also equipped with a low latency mode that improves the synchronicity between audio and video for smooth streaming and gaming.

Audio-Technica over-ear headphones provide excellent sound isolation in loud environments. Combining modern design and high-quality materials, the ATH-M20xBT delivers an ideal listening experience for those that put audio first.

The ATH-M20xBT headphones have a long battery life, providing up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection). The microphone and buttons built into the left earcup let you easily control calls, music playback, and volume. Constructed with professional-grade ear pad and headband material, the ATH-M20xBT was built for long-lasting durability and comfort.

Included Accessories: The ATH-M20xBT comes with a 1.2 m (3.9') cable for an optional wired connection.

The Features You Expect - The Studio Sound You Demand
Enjoy all the convenience, comfort and sound of a wireless design. The classic, high-fidelity M20x studio sound with enhanced bass is now yours to take with you wherever you go.

To Keep You Going - 60-Hr Battery Life
With the ATH-M20xBT headphones your music is always there for you. A full charge gives you up to 60 hours of playback, a 10-minute rapid charge provides up to 3 hours.

Best of Both Worlds - Wired or Wireless
The ATH-M20xBT comes with a detachable audio cable so you can use the headphones with a standard wired connection whenever you want or need to.

Features:
• Wireless, on-the-go design delivers the same sonic signature as the wired ATH-M20x professional studio headphones
• 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection)
• Microphone and buttons built into the left earcup let you easily control calls, music playback, and volume
• Over-ear design for excellent sound isolation in loud environments
• Professional-grade earpad and headband material for long-lasting durability and comfort
• Includes 1.2 m (3.9') cable for optional wired connection

Specifications Headphones:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 32,000 Hz
• Sensitivity: 100 dB/mW
• Impedance: 36 ohms
• Weight: Approx. 216 g (7.6 oz)
• Charging Time: Approx. 4 hours*
• Operating Temperature: 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time: Continuous transmission time (music playback): Max. approx. 60 hours*
• Microphone Sensitivity: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 to 20,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Power Supply: DC 3.7 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12”), USB Type-A / USB Type-C). Audio cable (1.2 m (3.9’) /3.5 mm (1/8”) gold-plated stereo mini-plug (3 pole/L-shaped))
(Notes: For product improvement, the product is subject to modification without notice.)

Specifications Bluetooth®:
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight - approx. 10 m (33')
• Maximum RF Output: 10 mW EIRP
• Frequency Band: 2.402 GHz to 2.480 GHz
• Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method: FHSS
• Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
• Support Codec: AAC, SBC
• Supported Content Protection Method: SCMS-T
• Transmission Band: 20 to 20,000 Hz

* The above figures depend on operating conditions.

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

rhythm – drum synthesizer and sequencer with parameter locks, individual step re-trig and punch-in effects.

real synthesised drum sounds
sampled drum sounds
16 punch-in effects including delay, bit crusher and filters.
parameter locks
auto compressor
hardware limiter
step multiplier
fill-ins
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-16/en

The CTRL CASE XL PLUS is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Numark Mixstream, NI Kontrol S4MK3, Pioneer DDJ-SR2 and many other controller models. Made of lightweight and rigid Durashock molded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

FITS:

• Numark Kontrol S4MK3
• Pioneer DDJ-SR2
• Numark Mixstream
• Hercules Inpulse 500
• Denon MC-4000

BASICS:

• Lightweight Durashock molded 5mm EVA foam and polyester exterior shell
• High density egg-crate foam to protect the displays, jog wheels, and controls
• Sturdy zipper and comfortable carrying handles
• Including detachable shoulder-strap
• Fits inside the MAGMA Rolltop Backpack III

SPECS:

• Outer measures: 59 x 36,5 x 10 cm
• Inner measures: 57 x 33,5 x 8 cm
• Weight: 1,4 kg

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - Paprika Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

In accordance with our mission to provide the vinyl enthusiast with the most beautiful, durable and flexible vinyl storage available we are extremely proud to offer our newest member of the Music Box family the 'Big Ten Inch Record Box'.

So in the words of Steven Tyler " Now whip out your big ten inch."

The 10 inch record has a long history dating back to 1947 and offered exclusively by Columbia Records at the time. The 10 Inch Record was revolutionary in that it offered a chance for labels and artists to present more songs on a single platter than previous iterations. The 10 inch record was originally marketed as a 'Long Playing' or LP record and reigned supreme until about 1954 with the advent and popularity of the 12 inch Record. Still and all, this proud slab of wax continues to live in hearts and bins of many collectors.

The 10 inch record is often offered as a unique keepsake for fans and a chance for an artist to release a superior sound quality recording when cut at 45 rpm. Deep uncrowded grooves!

This special Music Box has been designed to specifically hold and protect 10 inch Vinyl Records. It can used vertically or horizontally.

Internal Dimensions:
• 28cm x 28cm x 28cm

Exterior Dimensions:
• 316mm x 316mm x 298mm (L x W x H)

Sourced and crafted in Europe!

As with all our Oak Music Boxes we use 18mm thick edge glued Oak and 'tongue and groove' joinery in the construction and our oil is composed of Cooked Linseed, White Spirits, pigment and siccatief (a drying agent).

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

A Digital DJ looking for a professional, durable case solution for your NI Traktor Kontrol S4 MK3/ S2 MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor Kontrol S4 MK3/ S2 MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 1,89 kg / 4.158 lbs
• EAN: 8718969213073
• Outer Dimensions (W x H x D): 61 x 38 x 13 cm | 24 x 14.9 x 5.1 inch
• Inner Dimensions (W x H x D): 58.5 x 35.5 x 8.4 cm | 23 x 13.9 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Shoulder strap

Fits:
• NI Traktor Kontrol S4 MK3/ S2 MK3 Controller
• Pioneer DDJ-REV1
• Numark Mixstream Pro
• Behringer RD-8
• Roland DJ-707M

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,75 kg / 3.85 lbs
• EAN: 8717228279850
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 59.3 x 35.3 x 9.0 cm | 23.3 x 13.9 x 3.5 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-RR, DDJ-SB3, DDJ-SB2, DDJ-SR2, DDJ-SR, DDJ-Ergo V
• NI Traktor Kontrol S3, S4 MK3, S2 MK3, S5, S4 MK2, S2 MK2, Maschine Studio, Komplete Kontrol A25, Komplete Kontrol S25
• Numark Mixstream Pro, Mixtrack Pro FX, Mixtrack Platinum FX, Mixtrack Platinum, NVII, Mixtrack Pro 3, Mixtrack Quad, N4, iDJ Pro
• Denon MC4000
• Akai MPC Renaissance, MPK225, MPK25
• Reloop Beatmix 4
• Novation 25 SL MK2, Nocturn 25, Impulse 25
• Roland DJ-707M, System-1 Plug Out Synthesizer
• Hercules DJControl Inpulse 300
• M-Audio Axiom 25
• Allen & Heath Xone 4D
• Mixars Primo
• Alesis Q25, QX25
• Korg Modwave, Opsix

The AT-LH11H is a universal ½"-mount aluminum headshell that weighs only 11 grams – the lightest in the LH series – allowing it to be used with a wider range of cartridges on more turntables and tonearms than the other models.

With its non-threaded through-holes, the AT-LH11H is ideal for mounting cartridges with threaded mounting holes, such as the AT-OC9X, AT-ART9X, and VM95 Series cartridges. Like all LH models, this headshell has a hard anodized finish that reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. The headshell includes cartridge installation screws, plastic washers, and a hexagonal wrench.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

The Vinya line from the VS series by ZOMO is the latest generation of vinyl stands.

Thanks to its elegant, timeless design, the Vinya 50 cuts a fine figure in any living room, study or studio and keeps your record collection safe and secure at all times. The beloved vinyls stand in an upright position in the shelf and thus offer protection against deformation, caused by incorrect storage.

The vinyl shelf has extra wide feet that ensure a stable and secure stand, even when completely filled with records. The deformation-resistant, powder-coated steel gives the shelf the necessary stability, so that you will enjoy your vinyl collection for a long time.

The Vinya series is available in 3 different versions:

Vinya 50 - With space for up to 50 records

Features Zomo VS-Rack Vinya 50
•Vinyl stand with space for up to 50 LPs (depending on the thickness of the records)
•Stable and secure stand
•Unique design
•Robust construction made of powder-coated steel
•High quality from ZOMO
Technical data
•Material: steel - powder-coated
•Weight: 1,7 kg
•Dimensions (W x D x H): 300x 190 x 455 mm

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - White Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Stylus for Goldring E3 MM Cartridge

Just needle, not the complete cartridge included!

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

The new Clearaudio Turntable Vinyl Harmo-nicer mat: A genius development to improve any turntable sound quality.

This new turntable mat, made out of pure vinyl, will improve the contact between the platter surface and the LP. Every LP-record will sound more dynamic and more authentic. More balanced sound at low frequency and higher definition at middle and high frequency. This is possible becouse of the fact, that the vinyl Harmo-nicer mat is made from pure vinyl and has therefore identical speed propagation velocity as a LP. Tehe overall vibration energy - coused by tracking process - is trasfered with no reflection to teh platter.

The bottom surface of the Harmo-nicer mat is absulutely flat and polished. the top surface of Harmo-nicer mat has a special surface structure, which ensures maximum contact points to the LP-record surface than a regular platter surface.

Highest performace will be achieved if you are using the Clearaudio Outer Limit, Clearaudio Locator and a Clearaudio Record Clamp (e.g. Clever Clamp). The use of the Harmo-nicer turntable platter mat results in a bass control improvement, a better tonal balance. more precision in the middle and high frequencies and a highe overall dynamic.

Please note: While using the Clearaudio Harmo-nicer, you should re-adjust the VTA (Vertical-Tracking-Angle), accordingly to the trickness of the Harmo-nicer. The Harmo-nicer can be cleaned like a normal record, we do recommend to use the clearaudio record cleaning machine Matrix.

Technical specifications:

Outer diameter: 292 mm
Maximum Thickness: 2,4 mm
Weight: 190 g
Material: vinyl

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

VM510CB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH CONICAL STYLUS
Conical Bonded stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Conical Bonded stylus for less critical tilt angle adjustment allowing more flexible use on various tonearms.
VM type dual magnet design ensures outstanding channel separation, extended frequency response and superb tracking
Lightweight tapered aluminium cantilever allows for faithful reading of the record groove
Centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB
Durable low resonance polymer housing

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 20,000Hz
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 5.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Conical Bonded
Stylus Size 0.6 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN10CB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM510CB_UM_V2_11L_web_161011.pdf

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

WiFi Module for Transparent speakers. Connect your speakers using Transparent WiFi module and stream your music through WiFi. Easy to connect with the AudioCast app. Use your iPhone®, iPad®, Android phone and tablet, Mac® and Windows® laptop and cast music to your Transparent Speakers through your house. With one wireless system you can get a multi-room set up and play music everywhere.

CONNECTIVITY
• Connect your Transparent Speaker to your voice assistant devices such as Amazon Alexa and Siri devices
• Compatible with Airplay 2
• Stream music directly from any device that supports Spotify Connect and Tidal Connect
• Stream music from Deezer, Qobuz, Amazon Music, Napster, Pandora, Tuneln etc. using the iEAST App.

DESIGN
• Dimensions (mm): 54.25 x 54.25 x 13.45
• Color: Black

SOUND
• Wi-Fi: 2.4G and 5G
• Bluetooth: 5.0 and 5.2
• Output: 24bit/192Khz

WHAT'S IN THE BOX?
• iEAST Olio Streamer
• USB Type C Cable
• AUX Cable
• User manual

What is a Wi-Fi Module and what is it used for?
The iEast Olio Wi-Fi Module is a wireless sound streamer that turns your speakers into a Wireless Multi-room sound system by connecting to your home Wi-Fi network. In other words this means that you can play synchronized music in multiple rooms in your home. For instance if you have four speakers in your home, with an easy setup you can then enjoy your music everywhere.

Do I need a Wi-Fi Module to use my speaker?
No, the Wi-Fi Module just gives you the option to stream music using your Wi-Fi and to stream music simultaneously to multiple speakers. You can also play via the built in Bluetooth and through the 3.5 mm cable that is included with your speaker purchase.

Does the Wi-Fi Module work with all networks?
The Wi-Fi Module is compatible with both 2.4G and 5.0G Wi-Fi router.

How does Wi-Fi connection compare to Bluetooth connection?
The biggest difference is that Bluetooth only allows for short-range data transfer between devices. Bluetooth also limits the number of devices that can connect at one time. With Wi-Fi connection, as long as you have a good Wi-Fi connection you can connect multiple speakers and have a long distance between them. Some also think that the audio quality is better when streaming music with Wi-Fi.

Can I use the Wi-Fi Module with my current Transparent Speaker?
Depending on when you bought your speaker, there might be a few extra setups you need to consider.

Small Transparent Speaker:
If your serial number is lower than H1908STS you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the bottom of the Small Transparent Speaker.

Transparent Speaker:
If your serial number is H2103TS or lower you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the back of the Transparent Speaker.
How do I connect to the Wi-Fi Module?

To connect to the iEast Olio Wi-Fi Module, please follow these steps:
1. Download the "iEast Controller" app from App Store or Google Play Store on your smartphone or tablet.
Make sure your device is connected to the same WiFi you want to connect your speakers to.
2. Connect the USB cable to the Wi-Fi Module and to your Transparent Speaker on the rear/bottom panel.
3. Connect the music cable to the Wi-Fi Module and to the Line in socket on the rear/bottom panel.
4. Switch on your speaker and set the volume knob +50% to hear the various sound effects.
5. The Wi-Fi Module should now automatically go to set up mode and you should hear "Now in set up mode..." from the speaker.
6. Open the iEast app and select "Add device" from the menu.

7. Follow the on-screen instructions to connect the iEast Olio Wi-Fi Module to your home Wi-Fi network. You will need to enter your Wi-Fi network name and password.

8. Once the iEast Olio Wi-Fi Module is connected to your Wi-Fi network, it will appear in the iEast app. You can now start streaming music to your Transparent speaker.

9. Repeat the steps to connect multiple speakers.

You can also find video instructions further down on this page.

How do I create a group/multiroom set up?
1. First, follow the previous instructions on how to connect to the Wi-Fi Module.
2. In the "Devices" menu where you can see all your connected modules and speakers, click the small icon that looks like two speakers with a + sign.
3. Simple check each speaker that you wish to add to the group.
4. You should consider clicking the letter L/R/LR in the devices info box, to set your various speakers to a wider stereo mode if they are in the same room. Then you set one or more speakers on one side of the room to L and the other side to R. If you will play music in many rooms you might prefer to have all in LR setting.

How do I get the Wi-Fi Module to set up mode?
To put a previously connected module in set up mode, when its connected and power is on, press the small button on the Wi-Fi Module for about 5 seconds and release. You should now hear "Now in setup mode..."

How do I do a factory reset on the Wi-Fi Module?
Press the small button longer than 5 seconds and release, then you should hear "...has been reset".

Can I connect the Wi-Fi Module to other speaker brands than Transparent?
Yes, as long as the speaker got a USB connection and a line in jack it should be all good to go.

Do I need one Wi-Fi Module to each speaker I'd like to connect?
Yes you do.

45 RECORD-BAG „DUSTY DONUTS“ EDITION

Specially dedicated to all 45 enthusiasts and vinyl pros, the new MAGMA 45 RECORD-BAG 150 offers an extremely compact and stylish way to travel with up to 150 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. The main compartment is divided into two equal sections, so records can be organized front-to-back or side-to-side.

FITS
150 x 7-inch records
Headphones
Needle-case
Adapters
Slipmats

BASICS
Constructed of water-resistant 1680D Ballistic-Nylon
1 cm EVA padding and integrated PVC walls for ultimate protection
Protective rubber corners
Internal size and divider allows two different storage ways
Two outer accessory pockets for Headphones, needle-case and adapters
Separate mesh pocket for slipmat storage
Convenient carrying-handle and ergonomic shoulder-strap
Trolley-Sling
Strictly limited edition of only 150 pieces worldwide

SPECS
Outer measures: 21 x 39 x 25 cm
Inner measures: 18,8 x 38 x 20 cm
Weight: 1,56 kg

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Step into the music with the 2M Red
With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.

Featues:
The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire.
The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red delivers an open, dynamic sound with a slight touch of warmth.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Red
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Replacement stylus Nagaoka G JN-03D for the pickup DJ-03HD.

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Over-ear DJ headphones

Prime sound quality
Hear your tracks loud and clear in the booth and on the move with the HDJ-X5. By taking on board feedback from DJs and analysing many different styles of monitoring, we’ve made sure our new DJ headphone range includes all the features needed for performing at every level. Thanks to the high-quality audio design inherited from our previous professional DJ headphones, you can enjoy distortion-free monitoring, even at high volumes, wherever you go.

The HDJ-X headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
With a new 40-mm driver, hear your tracks loud and clear. The 4-core twisted-structure cable gives superior left and right channel separation and the magnetic circuit is optimised so, thanks to fine noise suppression and elaborate tuning, you can enjoy distortion-free sound.

Rigorously tested
Take the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.
*MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Excellent portability
A compact carry pouch fits snugly around your folded headphones to save space in your luggage and reduce the risk of damage on the road.

Various accessories included
The HDJ-X5 comes with a 1.2 m short coiled cable and an L-type mini-jack, preventing any accidental disconnection during performances.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)

Accessories:
• HDJ-X5
• 1.2 m Coiled cable (extended length 1.8 m)
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 32 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 269 g
• Frequency Range: 5 - 30000 Hz

Over-ear DJ headphones

Prime sound quality
Hear your tracks loud and clear in the booth and on the move with the HDJ-X5. By taking on board feedback from DJs and analysing many different styles of monitoring, we’ve made sure our new DJ headphone range includes all the features needed for performing at every level. Thanks to the high-quality audio design inherited from our previous professional DJ headphones, you can enjoy distortion-free monitoring, even at high volumes, wherever you go.

The HDJ-X headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
With a new 40-mm driver, hear your tracks loud and clear. The 4-core twisted-structure cable gives superior left and right channel separation and the magnetic circuit is optimised so, thanks to fine noise suppression and elaborate tuning, you can enjoy distortion-free sound.

Rigorously tested
Take the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.
*MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Excellent portability
A compact carry pouch fits snugly around your folded headphones to save space in your luggage and reduce the risk of damage on the road.

Various accessories included
The HDJ-X5 comes with a 1.2 m short coiled cable and an L-type mini-jack, preventing any accidental disconnection during performances.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)

Accessories:
• HDJ-X5
• 1.2 m Coiled cable (extended length 1.8 m)
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 32 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 269 g
• Frequency Range: 5 - 30000 Hz

DJ On-Ear Headphones with Bluetooth® functionality

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Bluetooth® wireless technology
Bluetooth® gives you the freedom to listen to music wirelessly. The built-in microphone enables you to take phone calls and, when you want to start DJing, you can simply connect the included cable to focus on your mix.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), USB charging cable , Precautions for use, Instruction Manual (Quick Start Guide)

Specifications:
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 250 g
• Frequency Range: 5 - 30000 Hz

Bluetooth:
• Output: Bluetooth® Specification Class 2
• Supported Codec: SBC, AAC
• Version: Bluetooth® standard ver. 5.0

Record broom

Easy and effective cleaning arm

Cleaning a record collection can be tiresome. There are many ways to de-dust your precious collection. All of them have one thing in common, you have to clean the records while they are put at rest. Sweep it E goes the other way. You can enjoy listening to your records while they are being cleaned. Simply place Sweep it E on your turntable and make sure that the brush is placed before the needle. This way the grooves will get clean right before the cartridge can pick up sound from it.
Sweep it E is made out of durable and resistant aluminium to make sure it lasts a long cleaning-life. With the heavy weight base it stands firmly on your turntable. The uni-pivot arm follows the grooves of your record and cleans them effectively. When you don‘t need Sweep it E you can simply put the arm on its dedicated arm-rest for a comfortable placement. The soft hair-brush guarantees that the records won‘t be harmed during the cleaning process.

Features:
• Gently cleans your vinyl while playing
• Follows the grooves
• Heavy weight base for secure placement
• Uni-pivot design
• Easy setup
• Suitable for Primary, Essential and Debut turntables
• Elegant looks
• Durable materials
• Brush made of natural hair

Technical Specifications:
• Weight: 430 g
• Arm-length: 226 mm
• Arm material: Aluminium
• Brush: Hair

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
Channel balance at 1 kHz - 1.5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1.6-2.0 g (16-20 mN)
Tracking force, recommended - 1.8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
2M standard and 2M Verso cartridges weight - 7.2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording