DJ Equipment 1814 Items

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Backpack lets you take a wide variety of your
essential gear for your digital set up from one gig to the next. It lets you safely store your digital controller in the main compartment while in the side entry laptop compartment can store up to a 19” laptop. It has enough space
in the two front pockets to store all your other necessities; hard drives, headphone, cables & accessories and is fully padded in all the right places for the ultimate in protection. The backpack has a 4-method carrying system. The UDG Controller Backpack is available in 3 sizes: Medium, Large, & Extra Large, each skillfully designed to fit many different models of equipment safely during transportation.

FEATURES:
• Water repellent laminated 600D Polyester exterior
• 4 compartments: main: for controller, side: for laptops of up to 19”, front: 2x for headphone, hard drives, cables & accessories
• Fits: Up to 19" laptop, Pioneer DDJ-REV7, XDJ-RX3, XDJ-RX2, XDJ-RX, Denon Prime 4, , MCX8000, Roland DJ-808, or similar size controllers
• Adjustable foam inserts to customization of main compartment to your gear
• 4-method carrying system
• Convenient carry handle & padded shoulder strap
• Bottom guard fabrics for added protection
• Easy grip zipper pulls

DIMENSIONS:
(Width x Height x Depth)

Outer: 76,3 x 53,1 x 22,5 cm
Inner: 73,3 x 50,1 x 10,2 cm

Weight:5 kg | 11 lbs

The Ramones "Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

M6 enables you to step up to a four-channel mixer. This club-style design not only works with any standard audio sources including turntables and CD players, but it also has a USB computer connection. When connected to your Mac or PC, the plug-and-play connection empowers you to mix in audio in from music-player software and record your sets into virtually any audio recording application.

You will enjoy a complete range of performance essentials in M6, including three-band EQ and LED metering per channel. M6 has a replaceable crossfader with slope control, and you can assign any channel to either side of the crossfader.

You can talk over the mix with M6’s dedicated XLR microphone channel and a secondary mic input on channel four. And for the best possible sound, M6 has balanced outputs.

Get all the flexibility of a four-channel mixer plus the power of computer connection with M6.

FEATURES

Four input channels, each with gain, three-band EQ, and LED metering
USB computer connection for playing and recording with Mac or PC
Play music from music-player software
Record your mix to your computer
Multiple phono, line, and mic inputs
Dedicated XLR mic channel and additional mic input on channel 4
Replaceable crossfader with slope control
Assign any channel to either side of the crossfader
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M6 USB Mixer
Power Cable
Quickstart Guide

Weight: 9.6 lbs
Dimensions (WxDxH): 12.625" x 14.25" x 4"

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Adjustable laptop shelf
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover
• Removable front access panel

Fits:
• Pioneer DDJ-REV5 controller

Specifications:
• Weight: 15,80 kg / 34.76 lbs
• Outer Dimensions (W x H x D): 84.4 x 51.5 x 24.3 cm | 33.2 x 20.3 x 9.5 inch
• Inner Dimensions (W x H x D): 73.8 x 36.2 x 5.5 cm | 29.1 x 14.3 x 2.2 inch
• Material: Heavy duty construction of 9 mm thick plywood

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Right & left side removable access panel
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 9,00 kg / 19.8 lbs
• Outer Dimensions (W x H x D): 51.1 x 42.6 x 23.0 cm | 20.1 x 16.7 x 9.1 inch
• Inner Dimensions (W x H x D): 45.6 x 38.6 x 7.8 cm | 17.9 x 15.2 x 3.1 inch
• Material: Heavy duty construction of 9 mm thick plywood

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• 1 x Rane Four + 1 x Laptop + Accessories

Specifications:
• Weight: 16,00 kg / 35.2 lbs
• Outer Dimensions (W x H x D): 89.0 x 53.1 x 23.3 cm | 35.0 x 20.9 x 9.2 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 9.0 cm | 30.8 x 15.4 x 3.5 inch
• Material: Heavy duty construction of 9 mm thick plywood

A Digital DJ looking for a professional, durable case solution for your Rane Four? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Rane Four, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Rane Four Controller

Specifications:
• Weight: 3,30 kg / 7.26 lbs
• Outer Dimensions (W x H x D): 83.8 x 45.9 x 12.4 cm | 32.9 x 18.1 x 4.9 inch
• Inner Dimensions (W x H x D): 78.8 x 41.0 x 10.7 cm | 31.0 x 16.1 x 4.2 inch
• Material: Durashock molded EVA foam

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Stylus for Goldring E1 MM Cartridge

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

The new Clearaudio Turntable Vinyl Harmo-nicer mat: A genius development to improve any turntable sound quality.

This new turntable mat, made out of pure vinyl, will improve the contact between the platter surface and the LP. Every LP-record will sound more dynamic and more authentic. More balanced sound at low frequency and higher definition at middle and high frequency. This is possible becouse of the fact, that the vinyl Harmo-nicer mat is made from pure vinyl and has therefore identical speed propagation velocity as a LP. Tehe overall vibration energy - coused by tracking process - is trasfered with no reflection to teh platter.

The bottom surface of the Harmo-nicer mat is absulutely flat and polished. the top surface of Harmo-nicer mat has a special surface structure, which ensures maximum contact points to the LP-record surface than a regular platter surface.

Highest performace will be achieved if you are using the Clearaudio Outer Limit, Clearaudio Locator and a Clearaudio Record Clamp (e.g. Clever Clamp). The use of the Harmo-nicer turntable platter mat results in a bass control improvement, a better tonal balance. more precision in the middle and high frequencies and a highe overall dynamic.

Please note: While using the Clearaudio Harmo-nicer, you should re-adjust the VTA (Vertical-Tracking-Angle), accordingly to the trickness of the Harmo-nicer. The Harmo-nicer can be cleaned like a normal record, we do recommend to use the clearaudio record cleaning machine Matrix.

Technical specifications:

Outer diameter: 292 mm
Maximum Thickness: 2,4 mm
Weight: 190 g
Material: vinyl

Replacement filter for the FLUX-Turbo.
The replacement filter must be changed approx. every 2 to 3 months or after 20 aspirations to ensure a good suction result. Two filters are supplied in a double pack.
The inner filter material is selected to retain the coarse particles. At the same time, the suction power is not reduced too much by the pressure loss.
The FLUX-Filter is compatible with FLUX-Turbo and the FLUX-Turbo 2.0.

Weight: 3 g
Size: 3 x 3 x 3.5 cm

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The new RIOT CONTROL-PACK LITE was developed especially for DJs and musicians who frequently travel with a DJ-controller or other production equipment looking to maintain a lite and compact profile. The padded main compartment features an integrated laptop-sleeve and a height-adjustable rolltop closure for ultimate storage flexibility. There is space to support models such as Pioneer DDJ-800, DDJ-SR2, NI Kontrol S4MK3 or Roland DJ-707M, etc., along with a laptop and accessories. Smaller gear such as headphones, cables and power supplies can be easily stored in the large front pocket.

FITS

Laptop up to 17"
Ableton Push2
Akai MPK-25
Akai MPC Renaissance
Arturia MiniBrute2
Arturia DrumBrute
Arturia MicroBrute
Denon MC-4000
Mixars Primo
NI Kontrol S4MK3
NI Kontrol S2MK3
Numark Mixtrack Platinum
Numark Mixtrack Pro 3
Numark NS6II
Numark NV2
Pioneer DDJ-SX3
Pioneer DDJ-800
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DDJ-SB3
Pioneer DDJ-400
Roland DJ-707M
Roland DJ-202
Reloop Terminal Mix 4

BASICS

Heavy duty and 100% waterproof Tarpaulin
PVC-coated zippers
210D Lining lining
Flexible height adjustment through Rolltop closure
Integrated laptop compartment
Hidden pocket for documents and personal belongings
Padded back panel with airflow system
Ergonomic backpack straps and adjustable sternum strap
Rubberized Bottom
Trolley-sling

SPECS

+ Outer dimensions: (H/B/T): 53-70 x 35 x 20 cm

+ Inner dimensions: : 52- 64 x 34 x 15 cm

+ Weight: 1,38 kg



+ Color: black/bionic-green (Item-No.: 47889 / EAN-Code: 4041212478894)

taunus 1.5 | com-fi pro | premium nylon night sky

largest and most comfortable version of
our puristic and lightweight backpack
for vinyllovers, travellers and minimalists.

_additional spacious pocket on the inner backside
_smaller inside zip pocket
_holds 16inch+ laptops or up to 40 x 12" records
_cushioned back
_extra double-layered breathable mesh cushioned back
_double-layered breathable cushioned shoulder straps
_4x unique adjustable buttons closure made from recycled
genuine leather
_hidden pocket-dock velcro patch for additional pouch options
_40mm wide straps with cushioning: 55mm

material: italian premium nylon with water-repellent coating
colour: black

h:46-49 x w:42 x d:11 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo

material: water-repellent cotton w/ genuine leather details

colour: deep blue

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

The excellent Dr. Suzuki Slipmats are now available in green!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Your record player needle also needs cleaning and care. Due to the air pollution caused by both external influences (traffic) and domestic factors (kitchen, smoking), a sticky film can form on your records over time. During playback, the stylus scrapes this deposit out of the record groove, which in turn creates a sticky film around the tip of the stylus, which in turn traps other dirt and dust on your record.

These deposits not only affect sound quality, but can even damage your favorite records. Nagaoka AM-801's special formula efficiently dissolves and removes any sticky substances trapped on the needle.

The Technics One-Two Mixed Set Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze features:

The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Bronze
Cartridge weight - 7.2 g
Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

Replacement case for record cleaner, two brushes included.

Made in Germany!

Luxury leadwireset
LW-6N is the 6N lead wire made of Ultra High Purity Copper wire.
The configuration is very sofisticated with different diameter of wire strand, the inside strand is right windings, the outside strand is left winding. The end of wire is fastened by gold plated terminal.
The tight winding against each other makes the clear transmission of music signals. Clear and crisp tonality.

Technical data:
• High purity Cu wire 6NCu: 7 x φ 0.18mm (Right strands)
• High purity Cu wire 6NCu: 17 x φ 0.10mm (Left strands)

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 6N with the SH-4 headshell requies the LW 6N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com