DJ Equipment 1818 Items

RCA cable for your Technics turntable!

No need to worry about earthing your Technics turntable anymore!

Easy installation.

• 1m/3ft flexible soft cable
• Low oxide copper wire
• Gold contact RCA plugs
• Internal ground PCB
• Large solder pads
• Reinforced secure cable

Straight outta SoCal.

Installation video:
https://youtu.be/Pqe8UsRT-bU

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Power break out board!

Do modifications?

A break out board for your Numark PT01 turntable.

This power board allows you to connect up to 3 different modification units/products.

Perfect if you have a cross breed of modifications from different manufacturers!

• x3 JST 2.0 output plugs
• Rated for 3 amps
• Fits standard JST 2.0 cable extensions

Comes with one cable extension.

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

An officially licensed Slipmat Set featuring the Iron Maiden 'The Book Of Souls' design motif. Each set of fabric DJ turntable slipmats contain a pair of slipmats. Screen printed on black fabric.

iL Logo printed on high quality felt (16 ounces). Two slipmats per package.

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. The HHV x UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the HHV x UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The HHV x UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This HHV x UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition) - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG SlingBag Trolley Deluxe (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. This limited edition version of the UDG SlingBag Trolley Deluxe comes with enough storage space for your records and additional equipment like headphones, controllers, mixers or other tools. In addition, it's also possible to transport a 15.4 inch laptop in the velvet padded interior compartment. In addition, the HHV x UDG SlingBag Trolley Deluxe has a more stable road position due to the widened wheelbase, which will not throw you off track even when sprinting to the train. Furthermore, the nylon upper material gave way to extremely durable, coated canvas, without sacrificing the rain protection for the vinyl. Easily replaceable foam pads with hook and loop fasteners provide a variable interior that offers maximum protection for approximately 58 x 12 inch records.

HHV x UDG SlingBag Trolley Deluxe - features/specs:

• soft rubber grip
• padded 15,4 inch laptop compartment
• small inner zip bag
• adjustable shoulder strap
• hide-away 3-stage trolley handle
• smooth rolling wheels with quality bearings
• UTX buckle at main compartment
• 2 x side zip pockets e.g. for headphones
• flap pocket with hook and loop fastenr, zip closure on front
• interior replacable padding with hook and loop fasteners
• code combination lock
• exterior dimensions (H x W x D): 470 x 510 x 310 mm
• interior dimensions (H x W x D): 320 x 390 x 200 mm
• weight: ca. 5,5 kg
• exterior fabric: coated canvas
• lining: 420D nylon

Here comes the add-on to our latest concrete turntable collaboration between HHV and BETONAT: the 100% Concrete Vinyl Stand. With a simple and straightforward design featuring clear shapes, this stand celebrates the fusion of urbanism, music, and subculture.

Handcrafted from 100% concrete, this vinyl stand is aesthetically pleasing and its minimalistic design complements any modern living space.

Whether you’re a collector or just starting out, the Vinyl Display Stand is the perfect way to show your favorite records.

Original HHV × BETONAT Vinyl Display Stand
Suitable for 7″ vinyl singles & 12″ vinyl LP, not for double LP
118 mm length x 48 mm height x 60 mm width
0.55 kg pure concrete
100% handmade in Berlin Neukölln
Beautiful gift box

The curved 7 Inch Single Puck is the companion piece of your big hole 7 inch records, made with high-grade steel. As a reminder that you can get the hottest beats and vinyl releases at HHV, the 7" Single Puck 45 RPM Adapter also features our branding at the bottom.

• Weight: approx. 140 g.
• Ø 37 cm
• Height: ca. 23 mm.

Made in Germany

The Headliner Gigastsand USB+ is a fully adjustable laptop stand with integrated high-speed USB hub. Designed for DJ’s, Musicians, Performers, and Creators, this 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

The Gigastand USB+ is constructed of steel and aluminum for the ultimate combination of portability and durability. It is fully adjustable, configurable in C or Z positions, and folds flat thanks to an intuitive ratchet lever system. Easily loosen and tighten each joint to find the right angle for your setup. The telescoping neck rotates 360˚ and has a max height of 16”.

The integrated USB hub features two USB-C ports and two USB-A ports to connect controllers, interfaces, hard drive, and more, and one USB-C port for computer connection. It is fully USB powered so it does not require carrying around an additional power supply.

Carrying pouch and USB-C cable included.

Highlights:
• Fully adjustable DJ laptop stand, configurable in C or Z positions and folds flat thanks to an intuitive ratchet lever system.
• Constructed of steel and aluminum for the ultimate combination of portability and durability.
• Telescoping neck rotates 360˚ and has a max height of 16”.
• Integrated USB hub features two USB-C ports and two USB-A ports to connect peripherals, and one USB-C port for computer connection.
• 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

Features:
• Fully-adjustable laptop stand with integrated USB hub
• (2) USB-C ports and (2) USB-A ports to connect peripherals, and (1) USB-C port for computer connection
• Ideal for storing and traveling with compact folding design and included carrying pouch
• Rugged construction of steel and aluminum for the ultimate combination of portability and durability.
• Ratchet lever system makes it a breeze to find the perfect position for the stand. Easily loosen and tighten each joint to find the right angle for your setup.
• Fully adjustable tray and feet up to +/- 90%
• Telescoping neck with 360˚ rotation and max height of 16”
• Configurable in C or Z positions to fit into most workspaces
• Also fits small controllers, samplers, drum machines, and more
• Fits laptops up to 17″
• Includes USB-C cable and pouch

Dimensions:
• Tray (WxD): 250mm x 232mm / 9.8” x 9.1”
• Legs (WxD): 250mm x 296mm / 9.8” x 11.6”

A piece for pierced ears, it consists of a
classic silver hoop earring with a fine curb
chain which attaches to an ear plug. When
not in your ear, the plug becomes the tip of
an extravagant dangle earring.

A glamorous modern tassel that catches
and reflects the light as it sways through
space, whether at an open air or in a pulsating
bunker.

Combining the company’s century-old legacy with modern-day convenience, GR3 represents Goldring’s stylish re-entry into the turntable arena.

Developed in collaboration with a renowned British hi-fi manufacturer, GR3 is equipped with the multiple award-winning Goldring E3 moving magnet cartridge, offering true plug-and-play functionality. Its built-in phono pre-amplifier allows seamless compatibility with any amplifier or powered speaker, while designed to maximise the flywheel effect, its Phenolic resin platter ensures consistent rotational speed for enhanced audio fidelity.

Additionally, GR3 comes with a choice of high-quality interconnects from Goldring’s world-renowned sister brand QED, ensuring a vigorous connection and sound quality.

Key features at a glance:
• Pre-fitted with a Goldring E3 moving magnet cartridge: This serial award-winning cartridge comes pre-installed and perfectly aligned on the GR3 tonearm, offering a balanced, refined and dynamic sonic performance.
• Built-in phono stage : For maximum convenience, GR3’s integrated pre-amplifier enables effortless connections to any amplifier or powered speaker of choice.
• Phenolic resin platter: Designed to maximise the flywheel effect, the platter ensures consistent rotational speed for enhanced audio fidelity.
• Choice of QED interconnects: Goldring provides a choice of either a 1.5 m phono-to-phono or a 3 m phono-to-3.5 mm cable from QED, one of the most respected names in audio interconnects and cables, ensuring optimal connection and sound quality.
• Elegant design: GR3 pairs premium performance with a high-gloss black plinth and perspex dust cover, offering a sophisticated aesthetic that matches its superior sound.

Pre-fitted Goldring E3 moving magnet cartridge
Goldring’s E3 cartridge is considered one of the best performers at its price point – just see the six consecutive What Hi-Fi? best buy awards for proof. Combining plug-and-play simplicity with uncompromised audio performance, the E3 arrives pre-fitted and pre-adjusted to the GR3 tonearm.

It features a stiff and lightweight aluminium cantilever offering accurate tracking, more detail and reduced distortion, while a 'dual magnet' generator ensures authentic reproduction, better channel separation and a more musical soundstage. Designed and engineered in the UK, micro-adjustments during production ensures a consistent and reassuring performance for the life of the product.

Built-in phono stage
Not every amplifier or powered speaker has the necessary gain and EQ to deal with the signal from a turntable. So, to make life easier, GR3 boasts an integrated phono pre-amplifier in order to do this job. It means this single turntable that can happily connect to any amplifier or powered speaker you decide to use without the need for extra phono amplification or boxes. Combine it easily with Q Acoustics M20 or M40 powered speakers for a user-friendly and musically powerful vinyl system.

Phenolic resin platter
The remarkable speed stability of the GR3 is maintained by employing a phenolic resin platter with an enhanced fly-wheel effect. By distributing the majority of its considerable mass at the outside of rotation, inertia is increased and therefore speed variations are suppressed. This gives the GR3 a very good wow and flutter performance which in turn ensures that the fidelity of its musical reproduction remains high.

Choice of QED interconnects
Goldring’s sister company, QED, is one of the most credible and highly regarded manufacturers of analogue and digital interconnects in the world - so choosing either a 1.5 m phono-to-phono or 3 m phono-to-3.5 mm cable to plug GR3 into a compatible amplifier or powered speakers, ensures a stable and robust connection.

Elegant design
To complement the GR3’s class-leading performance, a combination of a stylish high-gloss black plinth, covered by a perspex dust cover delivers a premium and sophisticated design that can match perfectly with any system or fit seamlessly into any interior design space.

Specifications:
• Tonearm: Hand assembled and carefully matched tonearm
• Cartridge: Factory-fitted Goldring E3 moving magnet cartridge
• Motor: 24 Volt low noise, low vibration motor
• Plinth: Gloss Black finish with Goldring gold branding
• Platter: Phenolic resin with flywheel mass on the rim
• Phono amp RIAA accuracy: (100 Hz to 20 kHz) ±0.4 dB, typically better than ±0.25 dB
• Dimensions (lid closed) (W x H x D): 450 x 120 x 360 mm
• Weight (unpacked): 5.5 kg

The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Reduced Moving Mass
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.

Expert Adjustment
The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Specifications:
• Frequency Response: 20 Hz -20 kHz ±3 dB
• Channel Balance: within 2 dB @ 1 kHz
• Channel Separation: better than 25 dB @ 1 kHz
• Sensitivity: 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec
• Static Compliance: 24 mm/N (lat); 16 mm/N (vert)
• Equivalent tip mass: 0.45 mg
• Vertical Tracking Angle: 24°
• Stylus Radius: Elliptical
• Stylus Type: Replaceable
• Load Resistance: 47 kΩ
• Load Capacitance: 150-200 pF
• Internal Inductance: 570 mH
• Internal Resistance: 660 Ω
• Cartridge Mass: 6.3 g
• Cartridge Mass (inc. fixings): 7.6 g
• Fixing Centre: 0.5" (12.7 mm)
• Playing Weight: 1.5 - 2.0 g (1.7 g nom.)
• Replacement Stylus: 1006 - D0

Stylus for Goldring E4 MM Cartridge

Just needle, not the complete cartridge included!

Stylus for Goldring E3 MM Cartridge

Just needle, not the complete cartridge included!

Goldring E3

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Violet
• Cantilever: Aluminium
• Stylus profile: Elliptical
• Stylus radius: 0.3 x 0.7 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Stylus for Goldring E2 MM Cartridge

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Stylus for Goldring E1 MM Cartridge

Stylus for Goldring G1006 Cartridge

Just needle, not the complete cartridge included!

Made from high-end cork, Glowtronics Cork Slipmats are preferred in high end audiophile vinyl listening since these absorb vibration well and static electricity gets reduced for a better listening experience. Besides that,

Glowtronics Cork Slipmats - Specifications:

• Material: Cork
• Weight: 41 g
• Dimensions: 30 cm Diameter
• Thickness: 3.175 mm
• Bottom Surface: Plain surface
• Grade: Strong High Quality
• Feel: Dense / Firm
• Purpose: High Quality Audiofile Vinyl Listening

The Vinyl Set Holder accommodates 25 LPs and is a real solid luxury record holder made of solid metal - simply a shapely fitment for all vinyl lovers. The most beautiful solution for presenting one''s records.

Technical Data
•Incl. fixing accessories

Features
•Holds up to 25 records
•Solid metal
•Easy assembly

The Vinyl Set Holder Smart for up to 25 7 inch records is equipped with a purist design and an especially lightweight construction – ideal for installation on the wall in the living room, home studio or record store.

Glorious Vinyl Set Holder Smart 7" - Technical Data:

• Dimensions: 218 mm x 150 mm x 64 mm (L x H x W)
• Weight: 80 g

Glorious Vinyl Set Holder Smart 7" - Features:

• Holds up to 25 vinyls in the 7''-format
• Especially light and stable construction made of metal
• Easy assembly on the wall, incl. fixing accessories
• Supplied without decoration (7''-records)

The Vinyl Set Holder Smart for up to 25 12 inch records is equipped with a purist design and an especially lightweight construction – ideal for installation on the wall in the living room, home studio or record store.

Glorious Vinyl Set Holder Smart 12" - Technical Data:

• Dimensions: 36.4 x 24 x 10.4 cm (L x H x W)
• Weight: 160 g

Glorious Vinyl Set Holder Smart 12" - Features:

• Holds up to 25 vinyls in the 12''-format
• Especially light and stable construction made of metal
• Easy assembly on the wall, incl. fixing accessories
• Supplied without decoration (12'' records)

For a clearly arranged array of record collections. The Vinyl Dividers feature an overlaying rider for labeling and stickers. A must-have for any record store.

Technical Data
•Made of flexible, thick PVC
•1 Glorious Divider per packaging unit

Features
•Helps arranging record collections
•Featuring a rider for labelling or stickers

The Glorious Turntable Lowboard is a high-quality piece of furniture in a retro 1960’s design and is ideal for placement in your living room. With a dedicated surface for a turntable and plenty of space for your vinyl collection, the Turntable Lowboard is ideal as a listening station. The open record crate invites you to dig through your collection and allows direct access to up to 130 12''-records.

• High-quality turntable lowboard in 60s retro design for your living room
• Listening station: provides storage space for a turntabel and plenty of space for records
• Open record crate for diggin through you collection and access to up tp 130x 12"-records
• Front compartment with push mechanism for amplifiers, CDs or boocks
• Cavity on the rear panel hides unsightly wires
• Timeless design made of wood with white high-gloss finish
• Stable and elegant stand made of solid ash wood (white ash)
• Shock-absorbing rubber feet for damping vibrations

Material corpus: MDF wood with white high-gloss veneer
Material stand: Ash wood (white ash)
External dimensions corpus: 862 x 240 x 420 mm (L x H x W)
Overall height: 444 mm
Weight: 17 kg

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

Features:
•Zubehörteil für Record Box-Serie
•Nachrüstbare Tür zum Verschließen einer Record Box
•Integrierte LP-Halterung für 12''-Schallplatte aus Metall
•Einfaches Einsetzen und Austauschen des Vinyl Covers
•Schnelle Anbringung dank der mitgelieferten Bohr-Schablonen
•Türverschluss mit magnetischem Push-Mechanismus
•Erhältlich mit schwarzem oder weißem Finish
•Inkl. Befestigungsmaterial

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

Replacement skids for the FLUX-Turbo.
After approximately one year of use, we recommend replacing the skids. In the set all 3 skids are included: 2 short ones for the sides an one long one for the suction channel.

Measures short:
Weight: 0.1 g
Size: 2 x 0.6 x 0.5 cm

Measures long:
Weight: 0.3 g
Size: 10.5 x 0.6 x 0.4 cm

Replacement filter for the FLUX-Turbo.
The replacement filter must be changed approx. every 2 to 3 months or after 20 aspirations to ensure a good suction result. Two filters are supplied in a double pack.
The inner filter material is selected to retain the coarse particles. At the same time, the suction power is not reduced too much by the pressure loss.
The FLUX-Filter is compatible with FLUX-Turbo and the FLUX-Turbo 2.0.

Weight: 3 g
Size: 3 x 3 x 3.5 cm

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.