DJ Equipment 913 Items

Made in Germany.

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

The Glorious Turntable Lowboard is a high-quality piece of furniture in a retro 1960’s design and is ideal for placement in your living room. With a dedicated surface for a turntable and plenty of space for your vinyl collection, the Turntable Lowboard is ideal as a listening station. The open record crate invites you to dig through your collection and allows direct access to up to 130 12''-records.

• High-quality turntable lowboard in 60s retro design for your living room
• Listening station: provides storage space for a turntabel and plenty of space for records
• Open record crate for diggin through you collection and access to up tp 130x 12"-records
• Front compartment with push mechanism for amplifiers, CDs or boocks
• Cavity on the rear panel hides unsightly wires
• Timeless design made of wood with white high-gloss finish
• Stable and elegant stand made of solid ash wood (white ash)
• Shock-absorbing rubber feet for damping vibrations

Material corpus: MDF wood with white high-gloss veneer
Material stand: Ash wood (white ash)
External dimensions corpus: 862 x 240 x 420 mm (L x H x W)
Overall height: 444 mm
Weight: 17 kg

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

The White Peach Records The Future We Used To Have 12" Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Der AT-VM95SH besitzt eine nackte
Shibata-Nadel – hochgeschätzt
insbesondere für audiophile HighendAnwendungen.
Der Shibata-Schliff ermöglicht satte,
volle Bässe und Mitten und einen
Frequenzgang bis 25.000 Hz.

AT-VMN95SH
VM95 SERIES SHIBATA REPLACEMENT STYLUS
Aluminium cantilever
Shibata Stylus
Nude Square Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

SHIBATA STYLUS
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.

Der AT-VM95SH besitzt eine nackte
Shibata-Nadel – hochgeschätzt
insbesondere für audiophile HighendAnwendungen.
Der Shibata-Schliff ermöglicht satte,
volle Bässe und Mitten und einen
Frequenzgang bis 25.000 Hz.

AT-VM95SH
VM95 SERIES SHIBATA STEREO CARTRIDGE
The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

SHIBATA STYLUS
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95SH
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.7 x 0.26mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95SH
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

AT-VMN95EN
VM95 SERIES ELLIPTICAL NUDE REPLACEMENT STYLUS
Aluminium cantilever
Elliptical Nude Stylus
Nude Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

AT-VM95EN vormontiert auf Headshell AT-HS6BK
• Das Tonabnehmer-Set AT-VM95EN/H wird im Audio-Technica Werk in Fukui (Japan) vormontiert, getestet und verpackt.
Gesamtgewicht 15,5 g

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

AT-VMN95E
VM95 SERIES ELLIPTICAL REPLACEMENT STYLUS
Aluminium cantilever
Elliptical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Das Tonabnehmer-Set AT-VM95E/H wird im Audio-TechnicaWerk
in Fukui (Japan) vormontiert, getestet und verpackt.
• Gesamtgewicht 15,5 g

AT-VM95E/H
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95E/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95E

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

AT-VMN95C
VM95 SERIES CONICAL REPLACEMENT STYLUS
Aluminium cantilever
Conical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

AT-VM95C/H
VM95 SERIES CONICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japa

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95C/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95C

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Model AT-VM95C
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95C
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

AT617A - CARTRIDGE STYLUS CLEANER
- Specially formulated polyurethane gel removes dirt particles from stylus
- Gel remains tacky for years
- Surface is washable for repeated use

The curved 7 Inch Single Puck is the companion piece of your big hole 7 inch records, made with high-grade steel. As a reminder that you can get the hottest beats and vinyl releases at HHV, the 7" Single Puck 45 RPM Adapter also features our branding at the bottom.

• Weight: approx. 140 g.
• Ø 37 cm
• Height: ca. 23 mm.

Made in Germany

45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear box

Material: PLA

45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear numbered box

Material: PLA

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high

Dr. Suzuki, Stokyo and Turntable Training Wax give you a traditional style portable 7 inch slipmat with 2 slip sheets included!
Specially cut to fit the Solid Cutz Vestax, PT01 and stock platters.
*****
Dr. Suzuki introduces a new Kuttin' Donut 7" Scratch Performance slipmat, made for Turntable Training Wax!
By using his patent materials Dr. Suzuki is able to have the record sit as flat and thin as possible to the slipmat/platter.
If you experience any doming or warped records, the center label cut out on the slipmat allows the record to sit snug into the slipmat to lessen any wobble/warp issues!
The long-awaited 7 inch Slip Sheet from Dr. Suzuki has been downsized and made carefully with selected materials similar to the classic and popular 12 inch version. Place between the slip mat platter for smoother record control!

Made in Germany.

Im 7 Inch Deco Display-Schallplattenaufhänger kannst du fünf 7" Vinyls mit Cover untereinander gesteckt aufbewahren. Durch den beidseitigen Einschub sind die Platten leicht zu wechseln und immer griffbereit. Quasi ein 5-fach Bilderrahmen für deine Lieblingsstücke. Durch das glatte, transparente Material sind die Cover sehr gut zu erkennen. Einfach aufzuhängen an zwei stabilen Ösen am oberen Rand sind die Platten darin wie in einer Schutzhülle vor Staub geschützt. We take care of your vinyl!

• Material: transparenter Polyethylen Kunststoff
• Folienstärke: 150µ
• Maße : 190 x 1000 x 0,15 mm
• Maße pro Fach: 18,5 x 18,5 cm

The excellent Dr. Suzuki Slipmats are now available in blue!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The excellent Dr. Suzuki Slipmats are now available in red!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market. The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.?? The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

• Alternative platter mats with special sound characteristcs
• Substitutes felt mats
• Damping of resonances from metal turntable platters
• Less noise
• Avoids static load
• Suitable for all turntables

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

The UDG Creator Headphone Case is a large carrying bag for DJ headphones such as the Sennheiser HD 25-1.

Lightweight 45" bag holds about 50 of your favorite PPU singles.