DJ Equipment 805 Items

A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio Arrow/ Apollo Solo? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Arrow/ Apollo Solo, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

• Weight: 0,57 kg / 1.254 lbs
• EAN: 8718969211673
• Outer Dimensions (W x H x D): 22 x 16.6 x 6.9 cm | 8.7 x 6.5 x 2.7 inch
• Inner Dimensions (W x H x D): 18 x 12.6 x 5.9 cm | 7.1 x 4.9 x 2.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Universal Audio Arrow / Apollo Solo

A Digital DJ looking for a professional, durable case solution for your Pioneer RMX1000 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer RMX-1000 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,45 kg / 0.99 lbs
• EAN: 8717228278310
• Outer Dimensions (W x H x D): cm: 37 x 19 x 7 | inch: 14.5 x 7.5 x 2.8
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper puller
• Convenient carry handles

Fits:
• Pioneer RMX-1000 Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Rane One? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Rane One, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Rane One
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
72,00cm

HEIGHT
43,00cm

DEPTH
14,00cm

INNER DIMENSIONS

WIDTH
68,80cm

HEIGHT
34,70cm

DEPTH
6,80cm

WEIGHT
2,27kg

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Launchpad X? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad X, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Launchpad X
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

WIDTH
30,20cm

HEIGHT
30,20cm

DEPTH
4,00cm

WEIGHT
0,99kg

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Circuit Tracks/Rhythm? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Circuit Tracks/Rhythm, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Circuit Tracks/ Rhythm
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
29,50cm

HEIGHT
25,00cm

DEPTH
7,00cm

WEIGHT
0,99kg

A Digital DJ looking for a professional, durable case solution for your NI Traktor Kontrol S4 MK3/ S2 MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor Kontrol S4 MK3/ S2 MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 1,89 kg / 4.158 lbs
• EAN: 8718969213073
• Outer Dimensions (W x H x D): 61 x 38 x 13 cm | 24 x 14.9 x 5.1 inch
• Inner Dimensions (W x H x D): 58.5 x 35.5 x 8.4 cm | 23 x 13.9 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Shoulder strap

Fits:
• NI Traktor Kontrol S4 MK3/ S2 MK3 Controller
• Pioneer DDJ-REV1
• Numark Mixstream Pro
• Behringer RD-8
• Roland DJ-707M

A Digital DJ looking for a professional, durable case solution for your Korg Electribe/ Electribe Sampler? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Electribe/ Electribe Sampler, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969210065
• Outer Dimensions (W x H x D): cm: 39.3 x 24.3 x 5.5 | inch: 15.5 x 9.6 x 2.2
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Korg Electribe, Electribe Sampler

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 2,36 kg / 5.192 lbs
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ MC7000
• Reloop Mixon 4

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime Go? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime Go, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime Go
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

EAN 8718969214339
Color Black
Weight 1,57 kg / 3.454 lbs
Outer Dimensions (W x H x D) 48.5 x 36.0 x 12.4 cm | 19.0 x 14.2 x 4.9 inch
Inner Dimensions (W x H x D) 41.7 x 27.9 x 11.4 cm | 16.4 x 10.9 x 4.5 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Denon DJ Prime Go Controller

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,75 kg / 3.85 lbs
• EAN: 8717228279850
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 59.3 x 35.3 x 9.0 cm | 23.3 x 13.9 x 3.5 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-RR, DDJ-SB3, DDJ-SB2, DDJ-SR2, DDJ-SR, DDJ-Ergo V
• NI Traktor Kontrol S3, S4 MK3, S2 MK3, S5, S4 MK2, S2 MK2, Maschine Studio, Komplete Kontrol A25, Komplete Kontrol S25
• Numark Mixstream Pro, Mixtrack Pro FX, Mixtrack Platinum FX, Mixtrack Platinum, NVII, Mixtrack Pro 3, Mixtrack Quad, N4, iDJ Pro
• Denon MC4000
• Akai MPC Renaissance, MPK225, MPK25
• Reloop Beatmix 4
• Novation 25 SL MK2, Nocturn 25, Impulse 25
• Roland DJ-707M, System-1 Plug Out Synthesizer
• Hercules DJControl Inpulse 300
• M-Audio Axiom 25
• Allen & Heath Xone 4D
• Mixars Primo
• Alesis Q25, QX25
• Korg Modwave, Opsix

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Hear the vivid sound experience that music playback offers with Nagaoka's MP-110 tonearm. Especially in the high-frequency range, the elliptical needle cut ensures better detail resolution. This creates a live atmosphere while listening, which is otherwise known from concerts.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel Separation (1kHz): >23dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P110
• Cartridge type: without head shell

Cleaning gel for records, floor coverings, joints, blinds or keyboards. Stubborn dirt is reliably removed. Can be used several times.

ATH-CKS50TW
ATH-CKS50TW truly wireless headphones combine advanced acoustic technology for stunning bass with a comfortable and secure fit, while a high-capacity battery provides up to 20 hours of powerful, continuous audio (up to 50 hours with the charging case). All you have to do is let the music take control.

The newly developed large-diameter drivers (9mm Solid Bass HD TWS drivers) deliver deep bass while the CKS50TW shape provides a snug fit - an important factor for truly wireless headphones as the airtight fit prevents the bass from escaping to deliver a unique and intimate music experience.

Make your voice heard with Qualcomm® cVc™ Generation 8.0
Enjoy improved microphone performance in calls, whether in the office, working from home or in an online class. The sidetone function of the CKS50TW also allows you to hear your own voice during calls for more natural-sounding conversations, feeling almost as if you weren’t wearing headphones at all.

Built-in button design for on-the-go operation
Audio-Technica’s ATH-CKS50TW wireless earbuds are designed for reliable, stress-free operation for a more enjoyable truly wireless listening experience. The left button adjusts the volume and switches between hear-through and noise-cancelling functions, while the right button lets you easily start/stop playback, skip between songs, or enable quick hear-through.

Rain and splash-proof design
The CKS50TW wireless earbuds boast an IPX4*-equivalent JIS protection rating. The splash-proof design means you never have to worry about keeping your truly wireless earbuds dry in sudden rain showers or when exercising.

*An IPX4-equivalent rating signifies the product will not be adversely affected by water splashing from any direction. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof.

Greater customization
Personalize the operation of your Audio-Technica earbuds via Audio-Technica’s Connect app, available from both Apple and Google Play. Take full control of your sound, switching between codecs, experimenting with equalizer pre-sets or adjusting your volume levels. You can even use the app to help locate your earbuds, so you’ll always have a stunning soundscape to accompany your day to day.

Interruption-free listening

Packed full of useful functions, the CKS50TW earbuds are compact, with a unique antenna structure designed to ensure stable connectivity while fitting in limited space. This helps prevent sound from being interrupted even in train stations or other crowded locations.

The ATH-CKS50TW earbuds also feature Qualcomm® TrueWireless Mirroring.

Independent transmission to the left and right sides reduces sound interruptions and delays for videos on all devices, including Android and iOS smartphones.

Automatic power-on and fast pair convenience

Once paired with your device, Audio-Technica’s CKS50TW wireless headphones automatically turn on and connect to your Android or Google device** when they are removed from the case for quick usability. When the truly wireless earbuds are put back in the case, they power down and begin charging. The power can also be turned on/off directly from the headphones.

** Only one Android device can be paired by using Fast Pair. Google and Android are trademarks of Google LLC.

Check up on your charge with LED indicators

The CKS50TW’s four LED indicators light up or flash whenever the charging case is opened or closed, so the user can see the charging status or remaining charging case battery power at a glance.

Sony’s 360 Reality Audio certified

The combination of 360 Reality Audio and Audio-Technica’s long-cultivated acoustic technology allows listeners to fully experience the world of sound envisioned by the creators.

Features
Bluetooth® 5.2
50 hour battery (20 hours in the earbuds + 30 hours in the charging case)
Fast charging support - 10 minutes = 90 minutes of power (approx)
Multi-point pairing function for registering multiple devices
9mm Solid Bass HD TWS drivers
Noise-cancelling mode
Hear-through function
Built-in mic and controls
IPX4
Qualcomm® cVc™ Generation 8.0
Qualcomm® TrueWireless Mirroring
SCMS-T protected content and 1seg broadcasting support
Voice guidance function*1
Compatible with Sony’s 360 Reality Audio*2
*1 Voice guidance can be used for notifications, including power and pairing statuses as well as remaining battery level (High, Medium, or Low).
*2 Requires use of subscription to compatible online music service – subscription fees may apply. Compatible services may not be available in certain countries/regions. Please visit https://www.sony.net/360RA to check compatibility of the service. "SONY'' is a registered trademark of Sony Group Corporation.

Specifications
Headphones
Type Dynamic
Driver Diameter 9 mm
Frequency Response 5 to 20,000 Hz
Sensitivity 110 dB/mW
Impedance 20 ohms
Weight Headphones: Approx. 8 g (0.28 oz) (L side), approx. 8 g (0.28 oz) (R side); Charging case: Approx. 60 g (2.1 oz)
Charging Time Headphones: Approx. 3 hours
Charging case: Approx. 3 hours
The figures above depend on operating conditions.
Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
Operating Time Continuous transmission time (music playback): Max. approx. 20 hours (headphones), Max. approx. 50 hours (if charging case is used in combination)
The figures above depend on operating conditions.
Microphone Type MEMS type
Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
Microphone Frequency Response 100 to 8,000 Hz
Microphone Polar Pattern Omnidirectional
Power Supply Headphones: DC 3.7 V lithium ion battery
Charging case: DC 3.7 V lithium ion battery
Water-Resistant (drip-proof) Performance IPX4
Headphones only
Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips (XS, S, M, L)
Notes For product improvement, the product is subject to modification without notice.
Bluetooth®
Bluetooth® Version Bluetooth version 5.2
Operating Range Line of sight - approx. 10 m (33')
Maximum RF Output 10 mW EIRP
Frequency Band 2.402 GHz to 2.480 GHz
Modulation Method GFSK, Pi/4DQPSK, 8DPSK
Spread Spectrum Method FHSS
Compatible Bluetooth Profiles A2DP, AVRCP, HFP
Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
Supported Content Protection Method SCMS-T
Supported Sample Rates 44.1 kHz, 48 kHz
Supported Bit Rates 16 bit, 24 bit
When using Qualcomm® aptX™ Adaptive audio.
Transmission Band 20 to 20,000 Hz

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

45 RECOD-BAG 100

The new MAGMA 45 RECORD-BAG 100 is the latest addition to MAGMA’s 45 bag range and perfectly holds up to 100 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. Additional accessories such as headphones, a needle-case and 45-adapters can be stored in the two zippered side-pockets.

FITS:

• 100 x 7” Vinyl-Singles
• 45 Adapters & accessories

BASICS:

• Heavy duty and 100% waterproof 1680D Ballistic-Nylon
• Integrated PVC walls for ultimate protection and stable fit
• Two side pockets fits headphones, needle-case and 45-adapters
• Internal zippered mesh-compartment
• Detachable shoulder-strap

SPECS:

• Outer measures: 29 x 20 x 21 cm (incl. side pockets)
• Inner measures: 19,5 x 18 x 19 cm
• Weight: 0,9 kg

45 Adapter not included.

Flair for your vinyl. Slide one of our weighted 45 rpm adaptors onto the spindle of your turntable to play your favorite 7”. The heavy duty enameled metal disc comes packaged in our custom muslin pouch, perfect for toting along to a party or your next spin session.

The official Phase Magnetic stickers to maintain your Phase Remotes on top of your record and mix in any situation. Contains 4 Phase Magnetic stickers.

• Steel strip coated with a strong adhesive layer
• Ensures that your Phase Remote perfectly holds to the record
• Designed to fit all your records
• Easy-to-setup

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

iL Logo printed on high quality felt (16 ounces). Two slipmats per package.

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

The excellent Dr. Suzuki Slipmats are now available in yellow!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

A Digital DJ looking for a professional case solution for your NI F1/X1/Z1 controller? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI-Kontrol F1/X1/Z1 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the F1/X1/Z1 controller, the Case is perfect for travelling DJ's that need to protect their equipment.

Weight 0,42 kg / 0.9284 lbs
EAN 8717228276934
Color Black
Outer Dimensions (W x H x D) cm: 33 x 16 x 6 | inch: 13 x 6.2 x 2.4
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Fits NI Traktor Kontrol F1
NI Traktor Kontrol X1
NI Traktor Kontrol Z1

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Multi Format Turntable Black MK2 also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Multi Format Turntable Black MK2 not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

EAN 8718969212762
Color Black
Weight 7,80 kg / 17.16 lbs
Outer Dimensions (W x H x D) 51.1 x 42.6 x 23 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D) 45.1 x 38.6 x 7.8 cm | 17.7 x 15.2 x 3.1 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Sturdy construction
Full padded interior keeps controller well-protected
High density diamond embossed EVA foam protective padding
Extra's Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
Fits Technics SL-1200MK7, SL-1200GR, SL-1200GAE, SL-1210GR
Pioneer PLX-1000
Denon DJ VL12 Prime
Reloop RP-8000MK2, RP-7000MK2, RP-4000MK2, RP-2000MK2, RP-1000MK2
Stanton ST-150, STR8.150, T.52, T.55 USB, T.62, T.92 USB
Vestax PDX-3000
Numark TTX
Audio Technica LP120-USB, LP1240-USB, LP120XUSB, LP1240-USBXP, LP140XP, LP3, LP5, LP7, LPW40WN
American Audio Power Drive 2.2
Mixars LTA, STA
or similar size turntables
And accessories

The UDG Ultimate Backpack Slim is a light weight, slim fit backpack for DJ’s that require a smaller version of UDG’s larger size backpacks. Constructed from high quality water resistant Nylon it contains a padded 17” laptop compartment with added neoprene iPad/tablet pocket. The zipper expandable main padded compartment can hold a Numark PT01 Scratch portable turntable or Pioneer DJM-S9 mixer and a few 7" & 12” tone control/scratch vinyl and some clothing. There are enough zipped compartments to securely store microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories. This bag comes with a built in outside USB charger connector, a quick access headphone pocket, ergonomic back padding, comfortable moisture absorbent shoulder straps and a sling so you can slide it on every UDG trolley.

Weight 1,40 kg / 3.08 lbs
Outer Dimensions (W x H x D) cm: 32 x 44 x 23 | inch: 12.6 x 17.3 x 9
Inner Dimensions (W x H x D) cm: 29.6 x 41.6 x 9.3 | inch: 11.6 x 16.4 x 3.6
Material Water Resistant Nylon 450D
Protection Padded 17” laptop compartment with added neoprene iPad/tablet pocket
Compartments to securely store microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories
Padded haul carry handles.
Extra's Zipper expandable main compartment
Outside USB charger connector
Quick access headphone pocket
Soft padded carry handle
Ergonomic back padding
Comfortable moisture absorbent shoulder straps
Trolley sling for easy transport
Fits up to 17" laptop,
Pioneer DDJ-XP2, DDJ-200, DJM-S7, DJM-S9, DJM-S3, DJM-450, DJM-250MK2, DDJ-WeGO3/4, DDJ-XP1, Toraiz Squid,
NI Maschine Jam/ MK2/ MK3, Traktor Z2,
Denon DJ Prime Go, MC2000,
Akai MPC Live/ II, MPD226,
Numark Scratch, PT01 Scratch, Omni Control, Party Mix, Stealth Control,
Reloop Elite, Beatmix, Digital Jockey III, KUT, Mixage IE,
Rane Empath, MP 2014, Sixty One, Sixty Two/Two Z, TTM 56S, TTM 57 MKII, TTM 57SL,
Novation Twitch,
Roland MC-202, TR-707, TR-8, TR-8S, Aira MX-1,
M-Audio Oxygen 25,
Mixars DUO MKII,
Gemini FirstMix Pro, Slate2, Slate4,
Hercules DJ Console 4-Mx, DJ Control Air S Series, DJ Control Wave, P32 DJ Controller, Universal DJ,
Livid CNTRL:R,
Arturia Drumbrute, Drumbrute Impact,
Vestax SPIN/ 2, TR-1, TYPHOON, VCI 100, VCI 300, VCI-100 MK2, VCI-300 MK2,
Microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

EAN 8718969212021
Color Black
Weight 3,05 kg / 6.71 lbs
Outer Dimensions (W x H x D) 40.1 x 32.1 x 19.5 cm | 15.8 x 12.6 x 7.7 inch
Inner Dimensions (W x H x D) 38.1 x 30.1 x 17.3 cm | 15.0 x 11.8 x 6.8 inch
Material Aluminum
Protection Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Removable front access panel
Fits Numark PT-01 Scratch Turntable USB, Party Mix, M6 USB, M2, NDX500, DM950,
Pioneer DDJ-200, DDJ-SP-1, DDJ-WeGO4, DDJ-XP2, CDJ-350, CDJ-850-K, DJM-S3, DJM-250MK2, DJM-350, DJM-450, DJM-750MK2, XDJ-700,
NI Maschine Jam, Maschine Mikro MK3, Maschine MK2/ MK3, Traktor Z2,
Ableton Push 2,
Akai MPC One, MPD226, MPK Mini MK2,
Allen & Heath Xone 23 / C,
Arturia DrumBrute Impact, MicroFreak, Minilab,
Elektron Analog Rytm,
Gemini CDJ-300, FirstMix I/O, FirstMix Pro,
Hercules DJControl Inpulse 200, DJControl Instinct, DJControl Starlight, P32 DJ Controller
Livid CNTRL:R,
Mixars DUO MKII,
Novation Launchkey Mini MK3, Launchpad Mini MK3, Launchpad MK2, Launchpad Pro MK3, Launchpad X,
Reloop KUT, Spin,
Roland K-25m, MC-202, TR-707
Stanton CMP800
or similar size cd players and mixers

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

EAN 8718969211826
Color Silver
Weight 4,50 kg / 9.9 lbs
Outer Dimensions (W x H x D) 49 x 42.3 x 21 cm | 19.3 x 16.6 x 8.3 inch
Inner Dimensions (W x H x D) 48 x 41.3 x 20 cm | 18.9 x 16.2 x 7.9 inch
Material Aluminum
Protection Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock & solid metal hinges
Rubber feet at the bottom for support in standing
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Removable front access panel
Fits Pioneer DJM-S11, DJM-S9, DJM-900NXS2, CDJ-2000NXS2, DJM-750MK2, XDJ1000MK2, CDJ-900NXS, DJS-1000, CDJ-1000MK3, CDJ-850, Toraiz SP-16,
Denon DJ Prime Go, SC6000/M Prime, SC5000/M Prime, X1850 Prime, X1800 Prime,
Akai Force, MPC Live/ II, APC40 MKII, MPD232,
Reloop Elite, Beatpad 2, RMX-60, RMX-90 DVS,
Rane Seventy, Seventy-Two, Twelve, MP2015
Allen & Heath Xone 43C, Xone 92, Xone 96, Xone DB4, Xone PX5,
Arturia Drumbrute, Keylab 25,
Behringer DDM4000,
Gemini MDJ-1000,
Hercules DJControl Air S Series, DJControl Jogvision, Universal DJ,
Korg MicroKey 25,
Livid OHM 64,
M-Audio Oxygen 25,
Mixars Quattro,
MODEL1,
NI Maschine Studio,
Novation AFX, 25SL MkII, Bass Station II, Launchkey 25
Roland Aira MX-1, TR-8, TR-8S,
Stanton DJC.4, SCS.4DJ,
or similar size equipment
or check UDG Gear Finder

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Multi Format Turntable Black MK2 Plus (Trolley + Wheels) also features built-in corner wheels on one side for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Multi Format Turntable Black MK2 Plus (Trolley & Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

EAN 8718969212779
Color Black
Weight 10,40 kg / 22.88 lbs
Outer Dimensions (W x H x D) 51.1 x 42.6 x 23 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D) 45.1 x 38.6 x 7.5 cm | 17.7 x 15.2 x 2.9 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Extra's Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
High quality retractable trolley handle
Built-in corner wheels with high quality in-line skate bearings
Fits Technics SL-1200MK7, SL-1200GR, SL-1200GAE, SL-1210GR
Pioneer PLX-1000
Denon DJ VL12 Prime
Reloop RP-8000MK2, RP-7000MK2, RP-4000MK2, RP-2000MK2, RP-1000MK2
Stanton ST-150, STR8.150, T.52, T.55 USB, T.62, T.92 USB
Vestax PDX-3000
Numark TTX
Audio Technica LP120-USB, LP1240-USB, LP120XUSB, LP1240-USBXP, LP140XP, LP3, LP5, LP7, LPW40WN
American Audio Power Drive 2.2
Mixars LTA, STA
or similar size turntables
And accessories