DJ Equipment 795 Items

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning creative performers. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam, which allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for Pioneer PLX-CRSS12 and creating another slot beside for cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Case Pioneer PLX-CRSS12 is designed to keep your Pioneer PLX-CRSS12 protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES

Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Pick & pluck foam
• Two side strong butterfly lock
• Rubber feet at the bottom for support in standing position

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle
• Removable access panel

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 4,30 kg / 9.46 lbs
• Outer Dimensions (W x H x D): 49.0 x 42.3 x 21.0 cm | 19.3 x 16.6 x 8.3 inch
• Inner Dimensions (W x H x D): 47.0 x 40.5 x 18.8 cm | 18.5 x 15.9 x 7.4 inch
• Material: Aluminum

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DDJ-REV5 Black Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Adjustable laptop shelf
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover
• Removable front access panel

Fits:
• Pioneer DDJ-REV5 controller

Specifications:
• Weight: 15,80 kg / 34.76 lbs
• Outer Dimensions (W x H x D): 84.4 x 51.5 x 24.3 cm | 33.2 x 20.3 x 9.5 inch
• Inner Dimensions (W x H x D): 73.8 x 36.2 x 5.5 cm | 29.1 x 14.3 x 2.2 inch
• Material: Heavy duty construction of 9 mm thick plywood

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer PLX-CRSS12 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Right & left side removable access panel
• UDG heavy-duty spring-loaded handles
• Cable access hole with removable UDG emblem cover

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 9,00 kg / 19.8 lbs
• Outer Dimensions (W x H x D): 51.1 x 42.6 x 23.0 cm | 20.1 x 16.7 x 9.1 inch
• Inner Dimensions (W x H x D): 45.6 x 38.6 x 7.8 cm | 17.9 x 15.2 x 3.1 inch
• Material: Heavy duty construction of 9 mm thick plywood

The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

• Pioneer DJM-V10
• Pioneer DJM-A9
• Pioneer DJM-900 NXS2
• Pioneer DJM-900 NXS / SRT
• Pioneer DJM-800 / 700 / 600
• Pioneer CDJ-3000
• Pioneer CDJ-2000 NXS2
• Pioneer CDJ-2000 NXS
• Pioneer CDJ-900 / 850 / 800
• Pioneer XDJ-1000
• Allen & Heath PX5
• Allen & Heath DB4
• Allen & Heath DB2
• Allen & Heath Xone 92 / 62 / 43C
• Denon LC 6000 Prime
• Denon SC-6000 / SC-6000M
• Denon SC-5000 / SC-5000M
• Denon X1850 / X1800
• Denon X1600
• Denon SC3900
• Denon SC2900
• Reloop RMX-90 DVS
• Reloop RMX-80 Digital
• Ecler Warm 4
• Ecler NUO4
• Rane MP2015
• Rane Sixty-Eight / Sixty-Four

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Solid aluminum profiles and spring loaded latches
• Additional foam to fit various mixer and CD-player models
• 3 removable front panel covers
• Convenient cable access ports
• Full padded interior
• Incl. recessed wheels for easy transportation

SPECS:

• Outer measures: 80 x 59 x 22,5 cm
• Inner measures: 33,1 x 42,5 x 8,4 cm (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
• Weight: 21,5 kg

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer DDJ-REV5 Controller + power adapter, extra cables

Specifications:
• Weight: 2,26 kg / 4.972 lbs
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
• Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
• Material: Durashock molded EVA foam

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

The ultimate companion for producers on the move - the UDG Ultimate Producer Backpack Trolley. This sleek and versatile backpack is designed to meet the demands of modern music producers and DJs, combining style, functionality, and durability in one package.

The Producer Backpack Trolley is more than just a bag; it's a travel companion designed to make your life easier while maintaining a sleek, professional look. Whether you're a DJ, music producer, or someone who needs a reliable, feature-packed backpack for travel, this is the perfect choice. Elevate your gear transportation experience with the ultimate in style and functionality. Get yours today!

FEATURES

Protection:
• Padded MIDI controller compartment
• Inseparable wheel cover
• Comfortable moisture absorbent shoulder straps
• Ergonomic back padding provide exceptional comfort
• Integrated with a TSA combination lock
• Easy backpack to trolley mechanism

Extra's:
• Multiple external pockets for accessories & smaller gear
• Quick access top pocket
• Top & side carry handles
• Retractable handle with 2-stage trolley system
• Smooth rolling in-line wheels with high quality in-line skate bearings

Fits:
• Main compartment fits up to 18.4" laptop.
• Pioneer CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3

Specifications:
• Weight: 4,25 kg / 9.35 lbs
• Outer Dimensions (W x H x D): 39.5 x 62.0 x 32.0 cm | 15.5 x 24.4 x 12.6 inch
• Inner Dimensions (W x H x D): 35.0 x 45.5 x 15.5 cm | 13.8 x 17.9 x 6.1 inch
• Material: Water Resistant Nylon 420D

A Digital DJ/ Producer looking for a professional, durable case solution for your NI Traktor X1 MK3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor X1 MK3, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Black soft fleece interior
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• NI Traktor X1 MK3

Specifications:
• Weight: 0,43 kg / 0.946 lbs
• Outer Dimensions (W x H x D): 33.8 x 14.4 x 6.8 cm | 13.3 x 5.7 x 2.7 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam

A Digital DJ looking for a professional, durable case solution for your Pioneer PLX-CRSS12 turntable? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer PLX-CRSS12 turntable, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Water repellent laminated nylon exterior
• Removable top-bottom egg crate foam prevent damage from vibrations and shocks
• Black soft fleece interior

Extra's:
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 2,35 kg / 5.17 lbs
• Outer Dimensions (W x H x D): 52.5 x 43.5 x 21.0 cm | 20.7 x 17.1 x 8.3 inch
• Inner Dimensions (W x H x D): 45.8 x 35.8 x 17.0 cm | 18.0 x 14.1 x 6.7 inch
• Material: Durashock molded EVA foam

Now NEW with changed recipe - without alcohol!

With the purchase of the DISCO-ANTISTAT MIXTURE, you have taken a decisive step towards cleaning and caring for your valuable records.

As of today, you can effortlessly clean old and heavily soiled vinyl records thoroughly and make them antistatic. Even vinyl records that have been played wet can be played back dry.

But even new vinyl records become immediately antistatic by a bath in the DISCO-ANTISTAT MIXTURE, even with sensitive measuring devices a static charge can no longer be detected.

Now also very suitable for shellac records!

Made in Germany!

- Disco-Antistat Ultrasonic - now with NEW features!

Automatic ultrasonic record washing machine

Disco-Antistat Ultrasonic - The most thorough way to wash records!
Our record washing machine Disco-Antistat Ultrasonic combines over 45 years of experience in the care and cleaning of records with highly developed, state-of-the-art cleaning technology.

The combination of ultrasonic cleaning and our proven goat hair brush system ensures gentle, groove-deep cleaning of your records and an audible improvement in the sound image.

During operation, the cleaning fluid is permanently clarified by a filter system and dirt particles are filtered out to minimise impurities in the fluid and thus achieve the best possible cleaning result.
With our special cleaner, the record is treated antistatically and thus permanently prevented from renewed soiling by adhering dust.
Our washer is ready for use in just a few steps and the intuitive operation ensures optimal results from the very first record!

• The cleaning time can be conveniently adjusted to the level of soiling of the record, supported by a functional display. Possible cleaning time is between 1-5 minutes and can be set in steps of 10 seconds.
• A well visible progress indicator informs about the status of the cleaning at a glance. (1 LED = 10% of the set cleaning time).
• After use, the filtered cleaning fluid can be conveniently refilled into the bottle by pressing a button via the new solenoid valve.
• The permanent filtering of the liquid prevents it from accumulating coarse dirt particles. This ensures a consistent cleaning result.
• The aluminium-glass filter can be easily removed and reinstalled for cleaning.
• Inserting and removing the record is quick and easy thanks to the innovative magnetic coupling.
• Driven by a Bosch electric motor, the record rotates evenly in the new fibreglass-reinforced tub, achieving a homogeneous treatment with ultrasound (46kHz.).

Disco-Antistat Ultrasonic
Cleanliness you can hear! A powerful ultrasonic transducer (46kHz.) generates with so-called cavitation bubbles that act directly on the dirt and remove it gently and effectively.
The ultrasonic waves also reach places that are inaccessible to conventional cleaning methods and ensure cleanliness down to the depth of the groove.
The loosened dirt particles are then brushed off with the soft goat hair brushes.

Scope of delivery:
• Ultrasonic record washer
• 200ml cleaning concentrate Disco-Antistat Ultraclean (1302000)
• 1 litre Disco-Antistat BiDest, high-purity water (1302001)
• 1 microfibre cloth
• Label cover incl. axle with magnetic coupling (1302010)
• Power supply 230 VAC / 12 VDC 3A
• 1 drying rack (1302499)
• 1 sponge brush 50ml
• 1 Mixing bottle (for preparing the cleaning liquid from Disco-Antistat Ultraclean and Disco-Antist BiDest)
• Replaceable aluminium/glass filter for cleaning (1225211)
• Operating manual in 8 languages
• Dimensions: 360mm x 180mm x 235mm (W x D x H)

Made in Germany!

Ortofon Record Stabilizer Heavy - Black - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Technical details:
• Dimensions: approx. 108 x 45 x 1,6 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• Ableton Push III
• Ableton Push I
• Ableton Push

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 43 x 37 x 10,5 cm
• Inner measures: 39 x 33 x 5 cm
• Weight: 1,3 kg

The Bundle contains 5x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 10x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 3x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

AIAIAI introduces world’s first professional wireless studio monitors

UNIT- 4 frees the music creation process with battery powered portability and ultra-low latency wireless audio.
With UNIT-4, what was previously confined to the traditional studio is now liberated in the hands of the creator, enabling them to break free from boundaries. Whether at home, on the road, or with friends, UNIT-4 allows for freedom of movement and increased opportunity for collaboration.

AIAIAI brings innovation in audio technology and acoustic design that packs professional studio monitor performance into a compact size of only 2.5kg. UNIT-4’s advanced wireless technology allows for wireless, uncompressed audio with only 16ms of latency. Three different modes of connection means complete versatility in one speaker with Wireless+ ultra-low latency, Bluetooth and cabled options. Designed from the inside out without using glue, UNIT-4 allows for total disassembly and component replacement, and is made from 100% recycled plastic.

The introduction of UNIT-4 is AIAIAI’s latest step in expanding its family of products using the W+ Link technology, which began with the introduction of the TMA-2 Wireless+ headphones in December of 2021. The W+ Link has been specifically developed for wireless audio with ultra-low latency in a stable and robust connection, designed for enhanced freedom for music making.

The UNIT-4 Wireless+ studio monitors allows creators to finally break free from the cable and expand their creative freedom. Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables.
Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

The key features uniquely designed for enhanced freedom and set UNIT-4 apart from other speakers are the following:

Complete wireless freedom
• Battery powered with 20H+ of playback time
• W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
• Complete wireless freedom - both audio and power cables

Reference monitor performance
• 2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
• Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
• Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
• Precise soundstage and point-source accuracy provided by the minimal front panel design, incorporating a directivity controlling tweeter waveguide
• Stage monitor design enables you to place the speaker upright or angled horizontally, to optimise your sound field in changing workspaces
• Shape UNIT-4’s sound to your environment or preference using the AIAIAI app customisable 5-band EQ

Portable, compact and rugged
• Size and weight of only 3 litres / 2.5kg
• Rear bass vent designed to be a comfortable carrying handle when on the move
• Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything
• W+ Link - use the X02 transmitter for low latency wireless music creation
• Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
• Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design
• Main components produced from 100% recycled plastics, from post-consumer sources
• Designed for disassembly in a glue-free design - take the whole speaker apart using twoscrewdrivers
• Replace worn out components including battery and drive units
• Future-proofed for new technologies with upgradeable wireless electronics

WHAT’S IN THE BOX?
• UNIT-4 Wireless+ Studio Monitor x2
• X02 W+ Link Transmitter
• Power supply x2

TECHNICAL SPECIFICATIONS:
UNIT-4 AUDIO
• Response: +/-2dB 50Hz-20kHz
• Low cut-off: 40Hz
• Peak SPL: 104dB
• Enclosure: Bass reflex
• Woofer: 4 inch high excursion
• Tweeter: 1 inch silk dome
• Crossover: 3kHz
• Amplifier: Class D 2x 80W peak
• DSP: Loudness adaptive bass EQ
• EQ adjustment: 5-band (AIAIAI app)

UNIT-4 AUDIO CONNECTIONS
• Low latency audio: AIAIAI W+ Link
• Bluetooth version: 5.2
• Analog inputs: 3.5mm aux / 6.3mm balanced

UNIT-4 POWER
• Battery playback time: 20 hours
• Charging time: 2 hours
• Battery capacity: 77Wh
• Power supply: 120-240VAC - 15VDC

X02 W+ LINK TRANSMITTER
• Latency: 16 ms
• Audio quality: Uncompressed
• Operating range: 12 m
• W+ Link connections: 2 devices

Omni Portable Turntable Tone Arm Tension Mod by Tiny Steppa

Enhance Durability. Unleash Potential.

"The tone arm tension design in the Omni is actually very simple, with the two rubber bands doing their job well. However, we're aware that rubber bands can become hard and lose elasticity over time, much like changing a platter belt after a long while. This modification gives you an option to enhance durability, and elevate Omni's potential."

Easy stylus weight adjustment: Fine-tune the stylus weight with your fingertips.
Tone arm protection: Nylon screws prevent tonearm coating damage during setup.
Simple installation: Quick and user-friendly assembly.
Tool kit included: All necessary tools are in the package.
Omni certified: Meets quality and compatibility standards.

Installation video can be found here:
https://www.youtube.com/watch?v=ctHskU8k67c

Watch the adjustment video here:
https://www.youtube.com/watch?v=TDKhq1hTC3s

R2 2-CHANNEL ROTARY DJ MIXER

Introducing the Headliner R2, a 2-channel rotary DJ mixer that is perfect for DJ’s looking for precise control and a warm sound, without breaking the bank. The R2 is packed with features, like an analog filter and 3-band isolator EQs on each channel, and uses only high-quality components, including genuine ALPS potentiometers.
Featuring two stereo channels with selectable Line and Phono RCA inputs, each channel on the Headliner R2 comes equipped with gain control with a peak LED, a 3-band isolator EQ, a headphone cue selector, a large channel volume control knob, and a filter activation switch.
The Master channel boasts an analog filter, headphone monitoring, and output control section. The analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls, giving you precise control over your sound. Independent Master and Booth outputs with volume controls, both with balanced XLR and unbalanced RCA connectors, give you the flexibility to connect to any sound system.
The Headliner R2 features genuine ALPS potentiometers, and a sturdy metal enclosure with stained wood side panels for a classic look that will complement any DJ setup. The modular internal construction, coupled with the external power supply connected via locking Mini XLR ensure superior audio performance.
The Headliner R2 is a reliable, high-quality mixer that will give your DJ performances that classic vibe. Whether you’re spinning house, techno, or classic funk/soul/disco jams, this fun little mixer is the perfect addition to your setup.

Technical specifications:

• Two stereo channels with selectable Line and Phono RCA inputs
• Each channel features Gain control with Peak LED, 3-Band Isolator EQ, Headphones Cue selector with LED, channel
volume control and filter activation switch with LED
• Master channel features analog filter, headphone monitoring and output control section
• Analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls
• Genuine ALPS potentiometers
• Headphone Cue control section features volume control, mix control (Cue/Master), and split monitor switch
• High current headphone amplifier with dual 1/4” and 1/8” jacks
• Independent Master and Booth outputs with volume controls, balanced XLR outputs and unbalanced RCA outputs
• Additional Record output with unbalanced RCA jacks
• Dual LED level meters for the Master output
• Microphone input with level control on front panel
• Sturdy metal enclosure with stained wood side panels
• Modular internal construction for superior audio performance
• External split rail power supply connected via locking Mini XLR connector and push-button power switch
• Measurements: 320 x 219 x 106 mm
• Weight: 2.8 kg

Microphone Input:
Nominal Input Level: -50dBu
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.1%
EIN: -120dBu (150Ω Load)
Input Impedance: 3 kOhm

Line Inputs:
Nominal Input Level: -10dBV (-7.8dBu)
Gain Range: -12dB to +12dB
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.05%
Input Impedance: 47 kOhm

Phono Inputs:
Maximum Input Level: -40dBu
Gain Range: -12dB to +12dB
Frequency Response: RIAA

Main Outputs:
Nominal Output Levels, balanced: +4dBu
Maximum Output Level, balanced: +20dBu
Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
Maximum Output Level, unbalanced: +12dBu
Frequency Response: 20Hz-20kHz (+/-0.5dB)
Residual noise: <-80dBu Dynamic Range: > 100dB
Crosstalk: < -65dB
THD + N: < 0.05%

Headphone Output:
Maximum Output Level: 70mA/channel into 150Ω
Minimum Load Impedance: 32 Ohms/channel

Power Supply:
Type: External with locking mini-XLR connector
Input Voltage: 100-240v ~ 50/60Hz
Output Voltage: +/-15V; 500mA
Voltage Range: 32 Ohms/channe
THD + N: < 0.05%
Input Impedance: 47 kOhm

Carbon Fibre Tone Arm for the Stanton STX Portable Turntable.

Available with Black gimble.

Engineered to work with:

• 3K carbon fibre tube and aluminum head shell
• Billet aluminum gimbal with ball bearings
• Custom engineered limited bounce tension system
• Phono analogue pre-amp included
• Easy wire installation kit, including cartridge mounting screws
• Engineered to work flawlessly with: Ortofon VNL/OM, Reloop OM-GT and Shure M44-7

Please note: The JDDPTA-SX does not include a cartridge and stylus.

Why not get the tonearm with a Ortofon VNL Cartridge & Stylus?

Installation video can be found here:
https://www.youtube.com/watch?v=pQsXTqpkfjQ

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

A digital DJ looking for a professional, durable case solution for your Ableton Push 3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Ableton Push 3, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Ableton Push 3

Specifications:
• Weight: 0,90 kg / 1.98 lbs
• Outer Dimensions (W x H x D): 42.4 x 40.7 x 6.1 cm | 16.7 x 16.0 x 2.4 inch
• Inner Dimensions (W x H x D): 38.4 x 32.2 x 4.5 cm | 15.1 x 12.7 x 1.8 inch
• Material: Durashock molded EVA foam

A music producer/ sound engineer looking for a professional, durable case solution for your Motu M4 or M2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Motu M4 or M2, this case is perfect for the travelling music producer/ sound engineer that needs to protect their equipment.

FEATURES
Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Motu M4 or M2

Specifications:
• Weight: 0,54 kg / 1.188 lbs
• Outer Dimensions (W x H x D): 23.3 x 15.5 x 5.6 cm | 9.2 x 6.1 x 2.2 inch
• Material: Durashock molded EVA foam

To clean your vinyl records thoroughly, it is important to place them on a soft, dirt-free surface. With the cleaning mat for vinyl records, HHV has created a solution that makes caring for your vinyl even easier.
Place the record in the middle of the cleaning mat and use Vinyl Care products such as the practical cleaning roller to remove dust and dirt from your vinyl. CDs or DVDs can easily be placed in the corner of the mat. The use of a plastic adapter is recommended for cleaning 7-inch records.
All Vinyl Care by HHV products are developed with direct feedback from our customers and offer innovative solutions for the care and storage of vinyl records.

With this 45 RPM adapter, you can place your single records exactly in the center of the turntable. The elegant black, durable adapter is made of high-quality aluminum and coated with an alloy. It has a diameter of 3.8 cm and is 1.2 cm high.
The adapter for 7-inch records is suitable for any record player and is a valuable accessory for professional use and vinyl enjoyment at home.
The Vinyl Care by HHV product range is constantly being expanded based on our customers' experiences and is aimed at passionate vinyl collectors.

Whether music cassettes or radio plays - cassettes are real collector's items that are worth storing well and presenting attractively. Our cassette rack is made of black lacquered pine wood and offers space for a total of 48 cassettes in three rows.
Vinyl Care by HHV stands for practical storage and cleaning products for music lovers. All products in the series impress with their clear design and uncompromisingly good quality.

Dimensions: 385 x 385 x 50 mm

The black vinyl stand offers space for storing 40-50 records. It is made of powder-coated metal and is ideal for professional and home use. Measuring 25 x 25 x 23 cm and with its clear design, the stand is an ideal storage option for all records that you want to have to hand quickly.
Under the Vinyl Care by HHV label, we present high-quality care and storage solutions for vinyl collections. We stand for top quality at affordable prices and take feedback from our customers as an incentive to continuously develop our products.

The cleaning roller offers you a time-saving and effective way to clean your records. Dust and dirt simply stick to the silicone surface of the roller. It is very easy to use: Carefully place the record on a clean, soft surface such as the Record Cleaning Work Mat from the HHV Vinyl Care series. Hold the cleaning roller by the handle and place the silicone roller on the record. Carefully roll over the entire surface of the record, changing direction several times.
To remove dust and dirt from the Record Cleaning Roller, wash it with lukewarm soapy water. Allow it to dry completely before using it again and store it in the storage box provided. Sunlight and chemical cleaning agents damage the roller and should therefore be avoided at all costs.
As part of the Vinyl Care series from HHV, we have developed the record cleaning roller especially for the needs of vinyl collectors. We incorporate the experience of our customers directly into product development.

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

The WARM4 is a professional analogue rotary DJ mixer with four channels, developed and produced by ECLER in Barcelona.
It has 4 phono/line channels, 2 microphone inputs, classic sharp filters and a 4th order isolator. The WARM4 also includes a unique feature: an analogue subharmonics synthesizer that can be selected per channel and is specifically designed to generate and amplify ultra-low frequencies.
The WARM4 is ECLER's latest analogue rotary mixer, inspired by New York's disco "Paradise Garage", also referred to by François Kevorkian as the "Temple of Music", whose influence has been instrumental in shaping some of today's best clubs. Designed and manufactured in the Barcelona factory, the WARM4 is a mixer that keeps the classic structure of ECLER mixers in mind, but incorporates completely redesigned circuitry and mechanics. This ranges from new circuit boards that further improve the noise floor and dynamic range, to the rotary pots that are carefully hand-assembled by our production team.
Staying true to the innovative spirit since the first A4 mixer in 1971, ECLER presents a DJ tool never before included in a mixer: an analogue subharmonics synthesiser. Inspired by the original device from the "Paradise Garage" DJ booth, we have developed our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the DJ can adapt it individually to the track and the respective sound system.
The WARM4 also features the 4th order isolator already included in the WARM2, as well as 4 mixing channels, 3-band equaliser with full cut per channel and high quality potentiometers from Alps with metal axis. Using an external effects module has also never been easier. The WARM4 can output a PRE/POST fader signal and lets you control and pre-listen to the return signal.
The WARM4 is designed specifically for sound systems that can reproduce subsonic frequencies - for clubs, festivals and events where bass response is crucial.
Unleash a whole new dancefloor experience and take the music experience to the next level!

Technical details:
AUDIO PERFORMANCE
INPUTS:
-
Number of inputs:
LINE: 4 stereo unbalanced inputs
PHONO: 4 stereo unbalanced inputs
MIC: 2 mono balanced inputs
FX RETURN: 1 stereo unbalanced input
Connection types:
LINE 1-2-3-4: RCS STEREO
PHONO 1-2-3-4: RCS STEREO
MIC 3: XLR3-F
MIC 4: Combo XLR3-F/6.3mm jack balanced
FX RETURN: RCS STEREO
Input sensitivity nominal / impedance:
LINE: 0 dBV / 50kΩ
PHONO: -40 dBV / 50kΩ
MIC: -50 dBV / >1kΩ
FX RETURN: 0 dBV / >6kΩ
POWER:
-
Frequency response:
LINE: 10Hz÷30kHz -1dB
MIC: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB
THD+N:
LINE: <0.004%
MIC: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%
CMMR (Common-Mode Rejection Ratio):
MIC: >75dB at 1kHz
Signal-to-noise ratio:
LINE: >105dB
MIC: >90dB
PHONO: >100dB
FX RETURN: >110dB
Trim control / tone control for inputs 1-2-3-4:
INPUTS 1-2-3-4: ±15dB
BASS: +10/-30dB
MIDDLE: +10/-25dB
TREBLE: +10/-30dB
Trim control / tone control for the isolator:
BASS: +12/-70dB
MIDDLE: +12/-40dB
HIGH: +12/-70dB
Sound filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MIDDLE: 200Hz÷6.8kHz
HIGH: 6.8kHz
Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz÷4kHz
MIDDLE:
HIGH: 4kHz
Analogue subharmonics synthesiser:
Input selective filter: 50÷120Hz
Harmonics synthesis: 25÷60Hz
Maximum output level: +12dBV
OUTPUTS:
-
Number of outputs:
HOUSE: 1 stereo balanced outputs / 1 stereo unbalanced outputs.
BOOTH: 1 stereo balanced outputs / 1 stereo unbalanced outputs
HEADPHONES: 2 stereo unbalanced outputs
FX SEND: 1 stereo unbalanced output
REC: 1 stereo unbalanced output
Connection types:
HOUSE: XLR3-M STEREO / RCS STEREO
BOOTH: XLR3-M STEREO / RCS STEREO
HEADPHONES: jack stereo 6.3mm / jack stereo 3.5mm
FX SEND: RCS STEREO
REC: RCS STEREO
Output level / Minimum load:
HOUSE (balanced): 0dBV/600Ω 1V *(+12dB 4V).
HOUSE (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (balanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ
Maximum undistorted output level:
HOUSE (electrically balanced): 21dBV (23dBu)
BOOTH (electrically balanced): 21dBV (23dBu)
HOUSE (unbalanced): 21dBV (23dBu)
BOOTH (unbalanced): 21dBV (23dBu)
ELECTRICAL
Power supply: Internal
AC mains voltage: 90-264VAC 47-63Hz
AC mains plug: 15A IEC inlet plug
Rated power consumption: 39 VA
OTHER
Control mode: Rotary with Alps Blue Velvet potentiometers and Alps RK09L potentiometers
Phantom power: 18VDC/5mA max (ON by default)
Input VU meter: LED 12 segments (-38dBV ÷ +10dBV)
House Mix Booth VU meter: LED 12 segments (-30dBV ÷ +20dBV)
Subharmonics output VU meter: LED 3 segments (-20dBV / 0dBV / +4dBV)
PHYSICAL
Operating temperature: -5˚C ÷ 45˚C
Operating humidity: 20 - 90% RH (no condensation).
Storage temperature: -10°C ÷ 50˚C
Storage humidity: <90% RH (no condensation)
Installation options: Desktop or rack mounting with optional accessories.
Accessories included: IEC cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm
Weight: 5.32 kg
Shipping dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm
Shipping weight: 6.74 kg

Made in Japan, STOKYO turntable replacement headshell

Official STOKYO headshell same type as you will find on Technics SL-1200
High Quality finish (Matte)
Lead wires (Shielded)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Ableton Push 3 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Ableton Push 3 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Adjustable laptop shelf
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners

Fits:
• Ableton Push 3

Specifications:
• Weight: 12,50 kg / 27.5 lbs
• Outer Dimensions (W x H x D): 45.6 x 43.2 x 18.3 cm | 17.9 x 17.0 x 7.2 inch
• Inner Dimensions (W x H x D): 38.2 x 31.9 x 6.8 cm | 15.0 x 12.5 x 2.7 inch
• Material: Heavy duty construction of 9 mm thick plywood

A music producer/ sound engineer looking for a professional, durable case solution for your Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante, this case is perfect for the travelling A music producer/ sound engineer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Removable divider for extra cables or power adapter
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante

Specifications:
• Weight: 0,40 kg / 0.88 lbs
• Outer Dimensions (W x H x D): 23.8 x 14.9 x 8.5 cm | 9.4 x 5.9 x 3.3 inch
• Inner Dimensions (W x H x D): 22.8 x 13.9 x 7.5 cm | 8.9 x 5.5 x 2.9 inch
• Material: Durashock molded EVA foam

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

The new Clearaudio Turntable Vinyl Harmo-nicer mat: A genius development to improve any turntable sound quality.

This new turntable mat, made out of pure vinyl, will improve the contact between the platter surface and the LP. Every LP-record will sound more dynamic and more authentic. More balanced sound at low frequency and higher definition at middle and high frequency. This is possible becouse of the fact, that the vinyl Harmo-nicer mat is made from pure vinyl and has therefore identical speed propagation velocity as a LP. Tehe overall vibration energy - coused by tracking process - is trasfered with no reflection to teh platter.

The bottom surface of the Harmo-nicer mat is absulutely flat and polished. the top surface of Harmo-nicer mat has a special surface structure, which ensures maximum contact points to the LP-record surface than a regular platter surface.

Highest performace will be achieved if you are using the Clearaudio Outer Limit, Clearaudio Locator and a Clearaudio Record Clamp (e.g. Clever Clamp). The use of the Harmo-nicer turntable platter mat results in a bass control improvement, a better tonal balance. more precision in the middle and high frequencies and a highe overall dynamic.

Please note: While using the Clearaudio Harmo-nicer, you should re-adjust the VTA (Vertical-Tracking-Angle), accordingly to the trickness of the Harmo-nicer. The Harmo-nicer can be cleaned like a normal record, we do recommend to use the clearaudio record cleaning machine Matrix.

Technical specifications:

Outer diameter: 292 mm
Maximum Thickness: 2,4 mm
Weight: 190 g
Material: vinyl

Record clamp.
LP-clamping unit with resonance absorbing locking unit and stainless steel grip.
Weight: 190 g

A freshly-cleaned vinyl record has so much more to offer: more information, more detail and better sound. That's why audio experts advocate cleaning not only your latest flea market finds but also your brand new LPs fresh from the press.
Clearaudio's smart matrix SILENT record cleaning machine combines scrupulous cleaning with oh-so-gentle handling of your precious vinyl collection. No more dust, dirt or chemical pressing residues. And, as its name suggests, this 'vinyl whisperer' comes with an exceptionally quiet operating mode. What's more, in its new enhanced edition the smart matrix SILENT is smarter than ever, sporting a raft of intelligent upgrades.

- The multi-functional cleaning arm deftly handles cleaning fluid application as well as suction, and is easily adjustable to any size of vinyl or shellac record.
- To start the cleaning process, simply swing the arm into place. No need to even press a button.
- Key components such as the motor, pump, cleaning fluid reservoir and waste fluid tank are now identical to those in our top-of-range ‘Professional’ model.
- Selecting functions and features is more intuitive and effortless than ever, thanks to new high quality, tactile push buttons for all controls.
- For ease of maintenance and transport the cleaning arm can be removed without the need for tools.
- The smart matrix SILENT is now available in a choice of silver or black, and is supplied with a matching universal clamp designed to hold any size of vinyl or shellac record securely in place.

Technical Specifications:
CONSTRUCTION PRINCIPLE
• Bi-directional rotation of the platter
• Integrated fluid application
• Very rigid chassis
• Included record clamp and single adapter
• Multifunctional cleaning arm for LPs, EPs and singles
• Easy controls

POWER CONSUMPTION
• Max. consumption: Approx. 300 watts
• Off mode: 0 watt (by switching off at the rear of the machine)

WEIGHT Approx. 10.6 kg
DIMENSIONS (W/D/H in mm) Approx. 345 × 345 × 235 (with record clamp) / Approx. 345 × 345 × 250 (with dustcover)
WARRANTY 3 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/cleaning/CA_smart%20matrix%20SILENT_E+D.pdf?d=1671461176

The nano phono V2 phonostage isn’t ruffled by anything.
External interferences are no longer an issue with this fine piece
of engineering. Its meticulously selected SMD components
are assembled by hand in Erlangen and tested several times.
The reward of these efforts is a signal to noise ratio of up to
84 decibels. The input impedance is set using plug-in links,
so there is no loss of quality when using different moving
magnet and moving coil cartridges. The nano phono
headphone V2 additionally contains a powerful headphone
amplifier within the solid aluminium housing for private
listening at the highest fidelity.

FEATURES
Technical Specifications:
• MODE: MM / MC switchable by jumpers (at bottom) / Subsonic filter switchable by jumpers (at bottom)
• AMPLIFICATION: 34dB (MM mode) / 54dB (MC mode)
• INPUT LOAD: 47 kΩ/ 220pF / MM mode / User MC mode
• RIAA ACCURACY: ± 0.4dB @ 20Hz - 50kHz
• THD: < 0.04%
• SIGNAL TO NOISE RATIO: 81dB (A) (MM mode) / 70dB (A) (MC mode)
• HEADROOM: 18dB / MC
• MAX. OUTPUT VOLTAGE: 10V eff (1 kHz)
• RIAA: Nach RIAA (Zeitkonst.: 75µs / 318µs / 3180µs)
• CHANNEL SEPERATION: > 80dB @ 1kHz
• OUTPUT IMPEDANCE: 75Ω
• INPUTS: unbalanced (RCA)
• OUTPUTS: unbalanced (RCA) / optional headphone output (Jack: 3.5mm)
• POWER CONSUMPTION: Max. consumption: 2.3 Watt / In operation: 2.3 Watt / Standby mode: < 0.3 Watt / Off mode: 0.0 Watt
• POWER SUPPLY: ±18V DC / 300mA / (external power supply)
• TOTAL WEIGHT: Approx. 500g (Preamp and power supply)
• DIMENSIONS (W/D/H): Approx. 3.35 × 4.17 × 0.98 inches
• DIMENSIONS (W/D/H): Approx. 85 × 106 × 25mm
• MANUFACTURER'S WARRANTY: 3 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/electronics/CA_Nano%20P+%20Headphone%20V2_D+E.pdf?d=1670854434

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black/silver turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

A Digital DJ looking for a professional, durable case solution for your Pioneer OPUS-QUAD? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer OPUS-QUAD, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle
• Easy grip zipper pulls

Fits:
• Pioneer OPUS-QUAD Controller + power adapter, extra cables

Specifications:
• Weight: 3,30 kg / 7.26 lbs
• Outer Dimensions (W x H x D): 98.1 x 53.5 x 15.8 cm | 38.6 x 21.1 x 6.2 inch
• Inner Dimensions (W x H x D): 97.1 x 52.5 x 14.8 cm | 38.2 x 20.7 x 5.8 inch
• Material: Durashock molded EVA foam

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/ hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Wheels) also features roller wheels with high quality in-line skate bearings for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• Rane Four Controller

Specifications:
• Weight: 14,50 kg / 31.9 lbs
• Outer Dimensions (W x H x D): 85.4 x 53.1 x 21.3 cm | 33.6 x 20.9 x 8.4 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 8.4 cm | 30.8 x 15.4 x 3.3 inch
• Material: Heavy duty construction of 9 mm thick plywood

A Digital DJ/ Producer looking for a professional, durable case solution for your Reloop Flux? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Reloop Flux, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

Weight 0,20 kg / 0.44 lbs
Outer Dimensions (W x H x D) 21.0 x 18.5 x 6.2 cm | 8.3 x 7.3 x 2.4 inch
Inner Dimensions (W x H x D) 16.0 x 13.0 x 5.2 cm | 6.3 x 5.1 x 2.0 inch
Material Durashock molded EVA foam
Protection Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam
Extra's Easy grip zipper pulls
Fits Reloop Flux