DJ Equipment 808 Items

Label protector for record cleaner.

Made in Germany!

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

aluminum, weight: 9g.

The vinyl dry cleaner is equipped with a sticky bottom, so it's easy to handle on a record player. Thanks to the ground cable, the adjustable Vinyl Trockenreinigungsarm eliminates static charge.

The analogis DeDuster Vinyl Silikon Roller was made to clean vinyl records. It's washable and durable, it'll clean your records for ages.

Ortofon Stylus 10 - technical data:

• Frequency range 20-24.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 25 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Tracking force range 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended 1.5 g (15 mN)
• Tracking angle 20°
• Stylus color Black
• Recommended for following cartridges: Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, TM 10H, LMB 12, SMB 12, LMA 12, Concorde STD, Dual ULM 65E, Dual ULM 66E

Technical data
Frequency range
20-25.000 Hz
Frequency response
20-25.000 Hz
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges OM 5E, OMP 5E, OMB 5E, OMT 5E

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessory Included: 6.3 mm (1/4") snap-on adapter

With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced detail, with excellent mid-range definition
Circumaural design contours around the ears for excellent sound isolation in loud environments

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 22,000 Hz
Max Input Power: 1,300 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 47 ohms
Folding/collapsible: Yes
Weight: (Without cable) 7.8 oz (220 g)
Cable - Detachable: No
Cable: 3 m (9.84’) Straight cable, left-side exit
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

Cutting-edge engineering and robust construction
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned flat for incredibly accurate sound monitoring across the entire frequency range
Circumaural design contours around the ears for excellent sound isolation in loud environments
90° swiveling earcups for easy, one-ear monitoring
Professional-grade earpad and headband material delivers more durability and comfort
Detachable cable (2 cables included)

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 24,000 Hz
Max Input Power: 1,600 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: (Without cable) 8.5 oz (240 g)
Cable - Detachable: Yes
Cable Includes: 1.2m-3m coiled, 3m straight cablesConnector Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Detachable cable (3 cables included)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Frequency Response: 15 - 28,000 Hz
• Max Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Folding/collapsible: Yes
• Weight: 10 oz (284 g) without cable/connector
• Cable - Detachable: Yes
• Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Accessories included: Screw-on 1/4” adapter, pouch

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

FEATURES

Inputs: two phono/line switchable (RCA), two line (RCA), mic (1/4")
Outputs: Master (RCA), Record (RCA), Headphone (1/4" stereo)
Three-band EQ and gain on each channel
EQ and gain on mic channel
Replaceable crossfader with reverse and slope-controls
Crossfader-style cueing

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Product Dimensions: 11.4" x 9.5" x 3.6"

Manual: http://www.numark.com/images/product_downloads/m2_quickstart_guide_v1_0.pdf

Get up and running quickly at any gig.

READY FOR DIGITAL OR ANALOG

DJs always need a dependable mixer. M101USB fits the bill perfectly as a highly adaptable two-channel mixer for virtually any DJ. M101USB lets you get up and running quickly whether you’re using a computer, turntables or CDs. M101USB is right at home at weddings, parties, clubs and everything in-between.

MIX YOUR MUSIC YOUR WAY

Beginners and seasoned DJs alike who want a durable USB-equipped two-channel solution will find M101USB a perfect fit. M101USB builds on the two-channel M101 mixer with the addition of an easy-to-use USB audio interface for DJs who want the option of working with their computer as well as traditional analog I/O.


TWEAKABLE TUNES

Beyond simply mixing, M101USB has a built-in EQ so that you can fine tune your mix depending on the room or the tracks themselves. Two pairs of switchable Phono/Line inputs are included along with a crossfader, ¼” mic input and stereo RCA line output for connection to an amplifier, powered speakers or another mixer. M101USB can be rack-mounted and features Numark’s legendary industrial-grade durability.

GET CONNECTED

Connecting M101USB to your computer is a snap using a single USB cable. Once connected you can use your computer as an audio source or record your sets straight to your computer's hard drive. If you're a computer DJ on the move and need solid, dependable two-channel performance, look no further than the M101USB mixer.

FEATURES

Two-channel rack-mountable mixer with USB
USB audio built in for playing from or recording to your computer
Two pairs of Phono/Line inputs
Built-in 2-band EQ for quick, easy sound tweaks
1/4-inch Mic input for voiceovers and announcements
Stereo Output for easy connection to amps, powered speakers or another mixer
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M101USB Mixer
Power Supply
Quickstart Guide

Manual: http://www.numark.com/images/product_downloads/m101usb___quickstart_guide___v1.0.pdf

M6 enables you to step up to a four-channel mixer. This club-style design not only works with any standard audio sources including turntables and CD players, but it also has a USB computer connection. When connected to your Mac or PC, the plug-and-play connection empowers you to mix in audio in from music-player software and record your sets into virtually any audio recording application.

You will enjoy a complete range of performance essentials in M6, including three-band EQ and LED metering per channel. M6 has a replaceable crossfader with slope control, and you can assign any channel to either side of the crossfader.

You can talk over the mix with M6’s dedicated XLR microphone channel and a secondary mic input on channel four. And for the best possible sound, M6 has balanced outputs.

Get all the flexibility of a four-channel mixer plus the power of computer connection with M6.

FEATURES

Four input channels, each with gain, three-band EQ, and LED metering
USB computer connection for playing and recording with Mac or PC
Play music from music-player software
Record your mix to your computer
Multiple phono, line, and mic inputs
Dedicated XLR mic channel and additional mic input on channel 4
Replaceable crossfader with slope control
Assign any channel to either side of the crossfader
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M6 USB Mixer
Power Cable
Quickstart Guide

Weight: 9.6 lbs
Dimensions (WxDxH): 12.625" x 14.25" x 4"

A REBORN CLASSIC.
The PLX-1000 is precision engineered for the booth, drawing on 50 years’ experience of making high-end turntables. This high-torque direct drive turntable is equipped with a classic layout and a rubber-lined, S-shaped tone arm that improves isolation and prevents feedback. It is solidly built for excellent vibration damping and ultra-precise, high grade audio playback.

Featuring next generation improvements, the PLX-1000 is the perfect score for professional DJs and vinyl enthusiasts. Combine this turntable with your Pioneer DJM mixer and get the ideal DJ system set-up.

TURN THE TABLES
The high-torque direct drive makes sure that your tracks reach a rotation speed of 33⅓ rpm in merely 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more). Plus it ensures stable rotation and exceptional control.

PICK UP THE PACE
Unique to this turntable is the multi-pitch tempo control. Next to a standard variable width of ±8%, you can also select a variable width from ±16% and ±50%. A simple reset button instantly reverts to the fixed rotation speed at ±0%.

EASILY CONNECTED
For low impendance and amazing sound quality output, you can easily connect to the professional-grade, gold-plated RCA jacks. Ideal for a DJ on the road, the PLX-1000 has interchangeble power and audio cables.

ncluded Accessories
Turntable sheet
Slip mat and sheet
Dust cover
Head shell
Balance, sub and shell weights
Audio cable
Ground wire

Width
453 mm
Height
159 mm
Depth
353 mm
Weight
13.1 kg
Power Requirements
220-240 V / 50/60 Hz

Drive Method
Quartz lock, servo-type, direct drive
Platter
Aluminium, die-casting diameter: 332 mm
Motor
3-phase, brushless DC motor
Braking System
Electronic brake
Rotation Speed
33⅓-45 rpm
Rotation Adjustment Range
±8, ±16, ±50 %
Wow and Flutter
<0.01% (Measured by obtaining signal from built-in frequency generator of motor assembly.)
Signal-to-Noise Ratio
70 dB
Starting Torque
> 4.5 kg/cm
Start Time
0.3 sec (at 33⅓ rpm)

Arm Type
Universal type S-shape tone arm
Gimbal-supported type bearing structure
Static balance type
Overhang
15 mm
Effective Length
230 mm
Tracking Error
Within 3°
Height Adjustment Range
6 mm
Stylus Pressure Variable Range
0-4 g (1 scale 0.1 g)
Single Cartridge Weight
3.5-13 g

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

The Technics Berlin Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

UDG CD Player/Mixer dust cover made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your gears from dust and liquid drops.

UDG CD-Player/Mixer Dust Cover - features:

• fabric: water-resistant nylon 210D
• UDG logo printed in plastisol
• fits CD player/mixer
• protect various equipment
• outer dimensions: approx. 32 x 38 x 13 cm (12.6 x 15 x 5.1 inch)
• weight: approx. 0.09 kg (0.19 lbs)

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The UDG Digi BackPack was specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style. A cleverly designed side entry compartment for a laptop up to 15.4 inch allows access without having to rummage through the main body of the bag. The spacious main compartment can hold an extra laptop or used for magazines/paperwork whilst in transit.
The front compartment features a detachable interface pouch and accessories organizer pocket. There are also 5 additional exterior pockets that provide storage for personal items, one of these has an ear bud access point with a hinged storage pocket so that you can listen to your mp3 player whilst on the go.

UDG Digi BackPack - specifications:

• water resistant nylon 450D shell
• easy access size entry padded compartment for 15.4 inch laptop with vertical file organization
• main compartment for laptop, LPs, books or magazine
• front compartment with organization panel and detachable pouch for audio interface
• 5 exterior pockets for personal essentials, including one with ear bud pass-through for mp3 players and unique hinged headphone pocket
• S-curved shoulder straps for ultimate comfort
• outer dimensions: approx. 33.5 x 48 x 27 cm (13.2 x 18.9 x 10.6 inch)
• inner dimensions: approx. 30 x 42 x 13 cm (11.8 x 16.5 x 5.1 inch)
• weight: 1.8 kg (4 lbs)

Inspired by the legendary UDG Producer Bag, the UDG Ultimate Producer Bag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

The UDG Producer Bag Large offers increased space for performers using laptops up to 18.4 inch and larger MIDI controllers.

Constructed from high quality fabrics, the backpack style UDG Producer Bag Large features padded walls with an adjustable divider so that you can create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

UDG Producer Bag Large - specifications:

Weight 3,25 kg / 7.15 lbs
EAN 8717228276675
Color Black, Orange inside
Outer Dimensions (W x H x D) cm: 46 x 56 x 25 | inch: 18.1 x 22 x 9.8
Inner Dimensions (W x H x D) cm: 32 x 46.5 x 15 | inch: 12.6 x 18.3 x 5.9
Material Water Resistant Nylon 420D
Protection Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.
Extra's 6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.
Fits Up to 18.4" laptop,
Pioneer Toraiz SP-16, DJS-1000, DJM-750MK2,
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2,
Denon DJ Prime Go, MC6000 MK2, MC3000,
Numark iDJ Live II, Mixtrack II / Pro II,
Rane Seventy, Seventy-Two,
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32,
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2,
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25,
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S,
M-Audio Oxygen 25, Trigger Finger Pro, Xponent,
Stanton SCS.4DJ, DJC.4,
Livid OHM 64,
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25,
various pedalboards,

CLARITY AND COMFORT FOR THE MODERN DJ

One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.

Thanks to its adjustable Height the Adam Hall Laptop Stand will offer every DJ flexibility to the fullest!

• Material: Steel
• Material Thickness: 2 mm
• Surface: Black coated
• Height: adjustable 165 - 280 mm
• Adapted for all laptop formats (12" – 17")

PACKS A PUNCH
32+ HOURS OF PORTABLE PLAYTIMEMARSHALL SIGNATURE SOUND

At a house party or in the park; Emberton III delivers rich, full Marshall signature sound that'll never let you down. Featuring Dynamic Loudness, each
frequency is constantly adjusted when you change the volume, ensuring that the tonal balance is always right. But this speaker really gets a kick from
being turned up loud. With an even bigger bass than its predecessor, it’ll inject your favourite songs with a whole new level of power, especially at max
volume. Emberton III never misses a chance to perform.

TRUE STEREOPHONIC
Emberton III features True Stereophonic, a unique form of multi-directional sound from Marshall. True Stereophonic is stereo sound, but not as you’ve
heard it before. Available exclusively on Marshall products, experience superior spatial and binaural sound that flows around you, filling any space.
Whether you’re in your kitchen or on a roof top, your music gets up close and personal with Emberton III. This is absolute 360° sound, where the music
finds you.

32+ HOURS OF PORTABLE PLAYTIME
Emberton III offers 32+ hours of portable playtime on a single charge, so you can keep listening all day and into the next. Its compact size, durability, and
reliable playtime make it an essential to pack whenever you open the front door. When you’re out of battery, just plug in your speaker and return to full
charge in 2 hours. If you need a speedy top-up, plug in for only 20 minutes to deliver a playtime of 6 hours. You’ll get the listening session going again in
no time.

DUST AND WATERPROOF
Marshall’s on the road spirit lives on in our Emberton III speaker. With its silicone exterior and solid metal grille, it boasts a rugged and robust design that
can go to battle with heavy showers. Emberton III doesn’t mind a swim either. With an IP67 dust and waterproof rating you can submerge it in 1 m (3 ft) of
water for a period of up to 30 minutes. Whether it’s a weekend festival or running through rain, Emberton III is good for all seasons.

BUILT-IN MICROPHONE
Music comes first, but we know life gets busy. As an update to our previous model, Emberton III comes with a built-in microphone, making hands-free
talking much simpler and clearer. For the first time, you can take calls while getting your day started or preparing for a gig. Catching up doesn’t need to
get in the way of what you’re doing.

BLUETOOTH LE AUDIO-READY
We don’t want anything to get in the way of your music, so Emberton III is built to be Bluetooth LE Audio-ready. This future-proof technology will open a
new world of audio sharing possibilities with Auracast™.

MAKING OUR PRODUCTS LAST LONGER
We want everything we make to last longer. This means taking responsibility for our products throughout their lifecycle, improving features that will help prolong
their lifespan, as well as using safer and more responsible materials in both product and packaging design. Our efforts in this field are ongoing, but below are some
examples of improvements we’re making.
Longer lifespan: We want you to enjoy your Marshall product for years to come, so we build our headphones and speakers to be rugged enough to withstand everyday
wear and tear. We also design them with new features in mind so that you can get more out of them for longer. For example, our products are
ready for next-generation Bluetooth LE Audio technology including Auracast™, and you can download OTA updates so that your product has the
latest software. We also now offer authorised repair services (1) and spare parts for Emberton III through our website.
Materials: When switching to more responsible materials, we focus on recycled sources and better chemicals. 79% of the plastic in Emberton III comes from
recycled plastic (2) made from preloved products including used electronic devices and CDs. Emberton III is also entirely PVC-free because of PVC
being considered one of the most harmful plastics.
Packaging: Our packaging is designed to minimise its environmental impact. To do this, it’s been optimised for transportation, we've minimised the plastic
content and used materials from responsible sources. Emberton III’s packaging is 96 % paper-based with a recycled content of 77 % (3). We also
use vegetable oil-based inks made from soybeans instead of traditional petroleum oil-based inks.
(1) Models eligible for authorised repair services may vary in different markets. Offering and expanding our repair solutions is one of our top priorities. Visit our support page
for the latest information.
(2) 27% of the product consists of plastic of which 79% is GRS certified post-consumer recycled plastic. Percentage breakdown is based on weight and excludes any plastic
that can be found in electronical components due to the lack of detailed material knowledge in every component.
(3) Percentage breakdown of retail packaging is based on weight and excl. user documentation.

The CTRL CASE XXL PLUS II is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) various DJ-controller models such as the new AlphaTeta DDJ-GRV6 as well as Pioneer DDJ-FLX10, DDJ-FLX6, Denon SC Live 2 and Denon MC-7000. Made of lightweight and rigid Durashock molded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

FITS:
• AlphaTheta DDJ-GRV6
• Pioneer DDJ-1000
• Pioneer DDJ-FLX10
• Pioneer DDJ-FLX6
• Denon SC Live 2
• Denon MC-7000

BASICS:
• Lightweight Durashock molded 5mm EVA foam and polyester exterior shell
• High density egg-crate foam to protect the displays, jog wheels, and controls
• Sturdy zipper and comfortable carrying handles
• Including detachable shoulder-strap
• Fits inside the MAGMA Rolltop Backpack III

SPECS:
• Outer measures: 74 x 44 x 11 cm
• Inner measures: 71,5 x 41 x 7 cm
• Weight: 1,9 kg

Wear your Cassette Player with pride and in style with the We Are Rewind Belt Clip.

Keep your hands free for fast Cassette swaps, volume changes or skipping to your next favourite track on the album or mixtape.

A solid solution for situations without pockets or bags and an ideal opportunity to show your Cassette Player to the world as a brave fashion statement.

Weight: approx. 404g

Combining the company’s century-old legacy with modern-day convenience, GR3 represents Goldring’s stylish re-entry into the turntable arena.

Developed in collaboration with a renowned British hi-fi manufacturer, GR3 is equipped with the multiple award-winning Goldring E3 moving magnet cartridge, offering true plug-and-play functionality. Its built-in phono pre-amplifier allows seamless compatibility with any amplifier or powered speaker, while designed to maximise the flywheel effect, its Phenolic resin platter ensures consistent rotational speed for enhanced audio fidelity.

Additionally, GR3 comes with a choice of high-quality interconnects from Goldring’s world-renowned sister brand QED, ensuring a vigorous connection and sound quality.

Key features at a glance:
• Pre-fitted with a Goldring E3 moving magnet cartridge: This serial award-winning cartridge comes pre-installed and perfectly aligned on the GR3 tonearm, offering a balanced, refined and dynamic sonic performance.
• Built-in phono stage : For maximum convenience, GR3’s integrated pre-amplifier enables effortless connections to any amplifier or powered speaker of choice.
• Phenolic resin platter: Designed to maximise the flywheel effect, the platter ensures consistent rotational speed for enhanced audio fidelity.
• Choice of QED interconnects: Goldring provides a choice of either a 1.5 m phono-to-phono or a 3 m phono-to-3.5 mm cable from QED, one of the most respected names in audio interconnects and cables, ensuring optimal connection and sound quality.
• Elegant design: GR3 pairs premium performance with a high-gloss black plinth and perspex dust cover, offering a sophisticated aesthetic that matches its superior sound.

Pre-fitted Goldring E3 moving magnet cartridge
Goldring’s E3 cartridge is considered one of the best performers at its price point – just see the six consecutive What Hi-Fi? best buy awards for proof. Combining plug-and-play simplicity with uncompromised audio performance, the E3 arrives pre-fitted and pre-adjusted to the GR3 tonearm.

It features a stiff and lightweight aluminium cantilever offering accurate tracking, more detail and reduced distortion, while a 'dual magnet' generator ensures authentic reproduction, better channel separation and a more musical soundstage. Designed and engineered in the UK, micro-adjustments during production ensures a consistent and reassuring performance for the life of the product.

Built-in phono stage
Not every amplifier or powered speaker has the necessary gain and EQ to deal with the signal from a turntable. So, to make life easier, GR3 boasts an integrated phono pre-amplifier in order to do this job. It means this single turntable that can happily connect to any amplifier or powered speaker you decide to use without the need for extra phono amplification or boxes. Combine it easily with Q Acoustics M20 or M40 powered speakers for a user-friendly and musically powerful vinyl system.

Phenolic resin platter
The remarkable speed stability of the GR3 is maintained by employing a phenolic resin platter with an enhanced fly-wheel effect. By distributing the majority of its considerable mass at the outside of rotation, inertia is increased and therefore speed variations are suppressed. This gives the GR3 a very good wow and flutter performance which in turn ensures that the fidelity of its musical reproduction remains high.

Choice of QED interconnects
Goldring’s sister company, QED, is one of the most credible and highly regarded manufacturers of analogue and digital interconnects in the world - so choosing either a 1.5 m phono-to-phono or 3 m phono-to-3.5 mm cable to plug GR3 into a compatible amplifier or powered speakers, ensures a stable and robust connection.

Elegant design
To complement the GR3’s class-leading performance, a combination of a stylish high-gloss black plinth, covered by a perspex dust cover delivers a premium and sophisticated design that can match perfectly with any system or fit seamlessly into any interior design space.

Specifications:
• Tonearm: Hand assembled and carefully matched tonearm
• Cartridge: Factory-fitted Goldring E3 moving magnet cartridge
• Motor: 24 Volt low noise, low vibration motor
• Plinth: Gloss Black finish with Goldring gold branding
• Platter: Phenolic resin with flywheel mass on the rim
• Phono amp RIAA accuracy: (100 Hz to 20 kHz) ±0.4 dB, typically better than ±0.25 dB
• Dimensions (lid closed) (W x H x D): 450 x 120 x 360 mm
• Weight (unpacked): 5.5 kg

The Headliner Gigastsand USB+ is a fully adjustable laptop stand with integrated high-speed USB hub. Designed for DJ’s, Musicians, Performers, and Creators, this 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

The Gigastand USB+ is constructed of steel and aluminum for the ultimate combination of portability and durability. It is fully adjustable, configurable in C or Z positions, and folds flat thanks to an intuitive ratchet lever system. Easily loosen and tighten each joint to find the right angle for your setup. The telescoping neck rotates 360˚ and has a max height of 16”.

The integrated USB hub features two USB-C ports and two USB-A ports to connect controllers, interfaces, hard drive, and more, and one USB-C port for computer connection. It is fully USB powered so it does not require carrying around an additional power supply.

Carrying pouch and USB-C cable included.

Highlights:
• Fully adjustable DJ laptop stand, configurable in C or Z positions and folds flat thanks to an intuitive ratchet lever system.
• Constructed of steel and aluminum for the ultimate combination of portability and durability.
• Telescoping neck rotates 360˚ and has a max height of 16”.
• Integrated USB hub features two USB-C ports and two USB-A ports to connect peripherals, and one USB-C port for computer connection.
• 2-in-1 device will save space on your workstation and in your bag by combining two integral parts of your setup.

Features:
• Fully-adjustable laptop stand with integrated USB hub
• (2) USB-C ports and (2) USB-A ports to connect peripherals, and (1) USB-C port for computer connection
• Ideal for storing and traveling with compact folding design and included carrying pouch
• Rugged construction of steel and aluminum for the ultimate combination of portability and durability.
• Ratchet lever system makes it a breeze to find the perfect position for the stand. Easily loosen and tighten each joint to find the right angle for your setup.
• Fully adjustable tray and feet up to +/- 90%
• Telescoping neck with 360˚ rotation and max height of 16”
• Configurable in C or Z positions to fit into most workspaces
• Also fits small controllers, samplers, drum machines, and more
• Fits laptops up to 17″
• Includes USB-C cable and pouch

Dimensions:
• Tray (WxD): 250mm x 232mm / 9.8” x 9.1”
• Legs (WxD): 250mm x 296mm / 9.8” x 11.6”

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

Specifications:
• Weight: 2.35 kg / 5.18 lb
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ SC LIVE 2, MC7000
• Reloop Mixon 8 Pro, Mixon 4,
• Hercules DJControl Inpulse T7

The new CTRL Case DDJ-REV5 / DDJ-REV7 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 / DDJ-REV7 controller. Made of lightweight and rigid Durashock molded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

FITS:
• Pioneer DDJ-REV5
• Pioneer DDJ-REV7

BASICS:
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
• Comfortable, rivet reinforced carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:
• Outer measures: 83 x 46 x 14 cm
• Inner measures: 73 x 37 x 11 cm
• Weight: 3 kg

The Smallville Logo Slipmats is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Wireless Noise Cancelling Headphones

Your Style, Your Stance.
The ATH-S300BT wireless noise cancelling headphones not only provide high-quality audio reproduction and the freedom to enjoy it anywhere, but best-in-class battery life, as well. With up to 90 hours of continuous use on full charge, you never need to worry about charging on the go. And when the battery runs low, a mere three minutes of charging will give you up to 2.5 hours of new battery life.

The ATH-S300BT wireless headphones boast advanced features like digital hybrid noise-cancelling, to let you enjoy a private, high-quality sound space, a hear-through function so you can remain aware of your surroundings when you wish, and a multipoint pairing function, allowing you to seamlessly switch between two connected Bluetooth devices.

The neutrally coloured wireless headphones feature fold-flat housings with a distinctive terrazzo marbled pattern and ergonomic earpads that fit comfortably over the ears for a sleek, attractive look. But there’s more to these headphones than just a pretty face. The headphones are also equipped with 40 mm drivers for powerful, full-spectrum sound.

In addition, the headphones are equipped with a built-in microphone for crystal-clear communication on calls, easy-touch buttons in the earcup for convenient control of volume, playback and more, and a low latency mode to minimise sound delay when gaming or watching videos. The ATH-S300BT wireless headphones are compatible with Siri and Google Assistant, and come with a 1.2 m (3.9") cable (with in-line mic and control) to give you the option of using a standard wired connection.

Power That Lasts - 90-Hr Battery Life
With the ATH-S300BT, the music – or videos or games or calls – never has to stop. The best-in-class battery life gives you up to 90 hours of playback. And when the battery’s low, a quick three-minute charge provides you with an additional 2.5 hours.

Your Sound Space - Digital Hybrid Noise Cancellation
Small MEMS microphones are built into the housings to pick up and cancel ambient noise. When selected, the system deploys both feedforward and feedback processes to give you the best active noise cancellation you can get.

Complete Your Look - Comfort and Style
We designed the ATH-S300BT wireless headphones to look and feel as good as they sound. With versatile neutral colouring, a distinctive terrazzo marbled pattern trim, and ergonomic earpads, you can count on these headphones to keep you in comfort and style. Plus, the housings fold flat for easy storage and transport.

Convenient Features - You're In Control
Select the noise-cancelling function to block outside noise and keep things quiet, or select the hear-through function to stay in touch with your surroundings and engage in conversations. As an added convenience, the headphones are equipped with a multipoint pairing function that lets you switch seamlessly between two connected Bluetooth devices.

Features:
• Wireless over-ear headphones with digital hybrid noise-cancelling technology let you enjoy a private, high-quality sound space
• Class-leading battery life with up to 90 hours of continuous use on a full charge with ANC off and 60 hours with ANC on
• Get 2.5 hours of use on a 3-minute rapid charge (via USB-C connection)
• Hear-through function allows you to hear ambient sounds (plus your own unmuffled voice) so you can talk to others around you without removing your headphones
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Sleek design with versatile, neutral colouring, distinctive terrazzo marbled pattern on the housings, and ergonomic earpads for a comfortable fit
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
Headphones
• Type Closed-back dynamic
• Driver Diameter 40 mm
• Frequency Response 20 to 20,000 Hz
• Sensitivity 103 dB/mW
• Impedance 44.5 ohms
• Weight Approx. 258 g (9.1 oz)
• Charging Time Approx. 2.5 hours
• Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time Continuous transmission time (music playback): Max. approx. 60 hours(when Bluetooth on, noise cancelling on) / Max. approx. 90 hours(when Bluetooth on, noise cancelling off)
• Microphone Type Headphones: MEMS type; Cable: Electret Condenser
• Microphone Sensitivity Headphones: -38 dB (1 V/Pa, at 1 kHz); Cable: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response Headphones: 50 to 10,000 Hz; Cable: 100 to 10,000 Hz
• Microphone Polar Pattern Headphones: Omnidirectional; Cable: Omnidirectional
• Power Supply DC 3.85 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12"), USB Type-A / USB Type-C) & Cable with inline mic and control (1.2 m (3.9')/3.5 mm (1/8") gold-plated stereo mini-plug (4 pole / L-shaped))

Bluetooth®
• Bluetooth® Version Bluetooth version 5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec AAC, SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20 to 20,000 Hz

* The above figures depend on operating conditions.

ATH-CKS30TW+ Wireless Headphones
Enhance the everyday with the ATH-CKS30TW+: the true wireless earbuds that stimulate the senses with chest-thumping bass and immersive active noise-cancellation.

Coming in four unique colours to suit your personal style, these pocket-sized truly wireless headphones offer high resolution sound for realistic music and movies. For beats that make your whole body move, activate the ultra-low-frequency equalizer to enjoy the richest depths of your music.

Combining super deep bass with noise-cancelling smarts, these in-ear headphones allow you to fully engage with your sound, wherever you are. Need to tune into your surroundings? You can safely let the outside in with hear-through and talk-through functions.

Enjoy up to 6.5 hours of use from each earbud when fully charged—even with noise-cancelling turned on—or 17.5 hours of use with both the headphones and charging case fully charged. Turn noise-cancelling off to get up to 7.5 hours of use from each earbud or 20 hours of use with the charging case.

Taking you from morning workouts to evening relaxation, these securely-fitting waterproof earbuds feature a snug fit to keep the bass intact and feel comfortable all day – and should they ever be misplaced, our handy Out of Range Alert keeps you in the loop.

Sound That Goes Deeper - Heavy Bass Beats
Dive even deeper into music with the ultra-low-frequency equalizer, Bass Boost – Deep, for a bass response that must be heard to be believed. Or, customise your sound in the A-T Connect App with four additional equalizer presets that enhance everything from vocal clarity to dynamic gaming experiences.

Acoustic ducts and proprietary 9mm drivers control airflow to ensure a rich and detailed performance that brings the excitement of a live show to everyday life.

Waterproof Design - Ready For Anything
The perfect companions to take you from the gym to the beach, the earbuds are highly waterproof and dustproof with an IP55 (1) rating – so there’s no need to worry about life’s splashes and spills.

High intensity workout? Don’t sweat it. The earphones can be safely rinsed off with water when your routine is finished.

(1) The IP5X rating provides protection against dust that can interfere with functions. The IPX5 rating provides protection against water jets. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof. The main body of the headphones is waterproof and dustproof equivalent to IP55, except for the openings where sound comes out.

Lose Yourself In Music - Active Noise Cancellation
Sit back and tune in: these active noise-cancelling earbuds let you fully engage with your favourite music or movies. Accessible with a single tap of the built-in touch sensors, you can also use the hear-through function to engage with your surroundings when listening to music on the go.

For when you need to hear travel announcements or have quick in-person conversations, the talk-though function lets you listen to those around you.

Unmatched Comfort And Fit - A Snug Design That Keeps The Bass Intact
Fitting snugly in the ear for a natural, strong hold, the wireless earbuds stay firmly in place during exercise, prevent bass from escaping, and supress unwanted outside noise with superior sound insulation.

Out of range alert - Easy location
Never lose your earbuds again. The Out of Range Alert notifies you when the Bluetooth signal is weak, so you’ll always know if you’re getting too far away from the headphones before the connection is lost.

Misplaced your buds? Open the Connect app to see the last location where the headphones were disconnected on a handy map.

Relax & Focus - Customisable Listening Experience
Whether you’re focussing on work or making time to unwind, the A-T Connect App’s soundscape function has your back.

Listen to the relaxing sounds of nature carefully recorded using Audio-Technica microphones, use masking noise to enhance concentration, or tune into healing sounds for mental rejuvenation.

Features:
• Available in four colors: standard matte black, discreet light beige, lively evergreen, or the unique translucent skeleton (translucent black)
• Up to 6.5 hours of use from each headphone when fully charged—even with noise-cancelling turned on—or 17.5 hours of use with both the headphones and charging case fully charged
• Turn noise-cancelling off to get up to 7.5 hours of use from each headphone or 20 hours of use with the charging case
• LED indicator lamp on the charging case for quickly checking remaining battery power
• Out of Range Alert and Product Locator for finding the earbuds’ last location
• Soundscape function via the A-T Connect App for improved focus or relaxation
• Customisable touch sensor control to play or pause music, skip between tracks, answer calls, and adjust the volume
• Adjustable touch sensor sensitivity to improve operation and adjustable volume steps to get the perfect listening comfort for your ears
• Clear and satisfying calls wherever you are, with selectable sidetone circuitry to improve conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Multipoint pairing function to stay connected to two Bluetooth devices at once and re-pair easily through the A-T Connect App
• Low latency mode to watch videos or play games with minimal sound delay (2)
• Fast Pair support for convenient connection with Android devices (3,4)
• Siri and Google Assistant support at the touch of a button for voice control (5,6)
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case (7)
• Selectable sidetone circuitry to improve conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Voice guidance in English and Japanese
2 - Low Latency Mode can also be turned on/off from the A-T Connect App. Bluetooth connections may be affected by obstacles and ambient radio wave conditions.
3 - Only one Android device can be paired using Fast Pair.
4 - Google and Android are trademarks of Google LLC.
5 - Siri® is a registered trademark of Apple Inc.
6 - Google and Android are trademarks of Google LLC.
7 - Pairing is required on first use.

Specifications:
Headphones
• Type Dynamic
• Driver 9.0 mm
• Sensitivity 110 dB/mW
• Frequency response 5 to 20,000 Hz
• Impedance 20 ohms

Microphone
• Type MEMS type
• Polar pattern Omnidirectional
• Sensitivity -38 dB (1 V/Pa, at 1 kHz)
• Frequency response 100 to 8,000 Hz

Communication specifications
• Communication system Bluetooth version 5.1
• Maximum RF output 10 mW EIRP
• Maximum communication range Line of sight -approx. 10 m
• Frequency band 2.402 GHz to 2.480 GHz
• Modulation method GFSK, Pi/4DQPSK, 8DPSK
• Spread spectrum method FHSS
• Compatible Bluetooth profiles A2DP, AVRCP, HFP
• Supported codec AAC, SBC
• Supported content protection method SCMS-T Transmission band 20 ～20,000Hz

Other
• Power supply: Headphones: DC 3.7V lithium ion battery / Charging case: DC 3.7V lithium ion battery
• Charging time: Headphones: Approx. 2.5hours*1 / Charging case: Approx. 3.0 hours

Operating time
Continuous transmission time (music playback, ANC on):
• Max. approx. 6.5 hours*1 (headphones)
• Max. approx. 17.5 hours*1 (if charging case is used in combination)
Continuous transmission time (music playback, ANC off):
• Max. approx. 7.5 hours*1 (headphones)
• Max. approx. 20.0 hours*1 (if charging case is used in combination)

• Weight: Headphones: Approx. 4.5 g (L side), approx. 4.5g (R side), Charging case: Approx. 28.0g
• Water-resistant (drip-proof) performance IP55 *2
• Operating temperature 5 °C to 40 °C

Accessories
• USB charging cable (30 cm , USB Type-A / USB Type-C),
• Eartips: Standard (XS, S, M, L), Soft (XS, S, M, L)

200W PREMIUM BATTERY POWERED PORTABLE PA

Premium Portable Sound
The Alto Professional Busker is the battery-operated PA for the active on-the-go musical performers who demand top-tier sound in a portable solution that will be at home on any stage. With its optimized woofer and tweeter pairing for 200 watts of output, Busker delivers clear, focused sound that makes your music shine in any environment. Connect your mics and line level instruments or devices with the integrated 3-channel mixer with easily accessible control knobs to dial-in volume without stopping the music.

Powerful and Polished Performances
Give your vocals or guitars some extra shine and polish with the built-in Alesis FX processing for world class sound in even the most intimate settings, complete with dedicated knobs to adjust amounts independently. Busker features Bluetooth on Channel 3 to wirelessly stream backing tracks from your smart device. Play rhythm tracks while you jam along or rehearse with your favorite metronome app to keep your fingers loose before showtime. While you have your smart device out, pull up the free Alto App for iOS and Android to quickly load your favorite configuration settings. An available 1/8th AUX input means you can connect your favorite sound sources like drum machines or groove boxes to keep you on beat with one simple connection.

Road-Tested, Always Ready to Roll
Busker is built to travel from gig to gig seamlessly with a compact footprint that retains enough heft to pump out tight, punchy sound. A rugged, durable exterior will stand up to the grind, while delivering the sound performance you can count on, night after night. Set it vertically on stage to enjoy accurate amplification, lay on an angle to project towards you, or pole mount it to keep your audience on their feet and immersed in your tunes. A dedicated XLR out enables a direct line to FOH or other destinations for those bigger gigs, all the while letting you enjoy your familiar custom-tailored sound up close and personally.

Long Lasting Battery
Maximize power in between charges with Battery Eco Mode, providing up to 24 hours of performance power. The Alto Professional Busker brings big sound to the best performers.

Your Way to Play and Perform Anywhere:
• 200W of powerful, portable sound with 6.5” (165mm) woofer and 1” (25mm) tweeter
• Free Alto App (iOS/Android) for remote configuration and control
• Bluetooth music streaming direct from your device
• Integrated 3-channel mixer with built-in Alesis FX
• 2 XLR/TRS “Combo” inputs (for mics, instruments, & line level sources)
• Aux input for non-Bluetooth devices
• XLR Line output
• Battery Eco Mode for increased performance up to 24 hours
• Compact, lightweight design that’s easy to transport
• Use standalone or on a pole with DSP Speaker
• Use modes for best sound
• Sit, Stand, or Expand Your Busker
• Link two Buskers wirelessly via Bluetooth for stereo playback
• Flexible horizontal and vertical monitor positions

TECH INFORMATION
Output Power
Eco Mode: 50 W (peak)
Standard Mode: 200 W (peak)

Drivers
Low-Frequency: 6.5” (165.1 mm) woofer
High-Frequency: 1.0” (25.4 mm) tweeter

Max SPL
106 dB

Frequency Response
60 Hz – 20 kHz

Connectors
(2) Combo XLR-1/4” (6.35 mm) Inputs (1) 1/8” (3.5 mm) AUX Input
(1) USB Charging Port
(1) XLR Line Out
(1) RCA Line Out

Charge Port
5V, 2.1 A

Bluetooth Specifications
Profile: A2DP, AVRCP
Version: 5.0 Codec: SBC
Frequency: 2402 – 2480 MHz Maximum Transmission Power: 10 dBm Protocol: BLE Range: 100 ft. (30.5 m)

Battery
Type: 6.6 Ah, 12 V, Lithium Ion
Life: Eco Mode: up to 90 hours; Standard Mode: up to 30 hours Charging Time: 12 hours

Power
Connection: IEC
Voltage: 100–240 VAC, 50/60 Hz, 120 W; 220–240 VAC, 50/60 Hz; 120 W Fuse: 100–120 V, T1.6AL AC250 V; 220–240 V, T0.8AL AC250 V

Dimensions (height x width x depth)
11.8” x 8.6” x 10.0” 299 x 219 x 254 mm

Weight
11.9 lbs. 5.4 kg

Record weight made of aluminum with an integrated Teflon bushing on the underside for smooth placement (332 g).

This high-quality accessory, available in silver or black anodized aluminum, is specifically designed for the Performance series and stands out with its stylish design and exceptional functionality. Of course, this weight can also be used with other Clearaudio models and other brands.

The Performance record weight features an integrated Teflon bushing on the underside, ensuring smooth placement and significantly easing handling. At the same time, the weight is softly decoupled from the spindle. With a precisely calibrated weight of 332 grams, it is tailored for turntables with CMB bearings and clearaudio DC motors, making it the perfect complement to these systems.

Additionally, the record weight is compatible with all radial tonearms as well as the TT5 tonearm, making it a versatile accessory for audiophiles and professional users alike.

Weight: 332 g

True Wireless Headphones With Active Noise Cancellation

• Immersive Sound – with aptX Lossless and customisable EQ
• Extended Play Battery – up to 10hrs + 23 (ANC on), 16 + 36 (ANC off)
• Active Noise Cancellation – adaptive hybrid with 3 modes + transparency
• Comfort Fit – choice of 5 pairs of ear tips, in silicone and foam
• aptX Adaptive – interruption-free sound up to 24bit/96kHz
• Bluetooth 5.3 – with greater speeds & data capacity for music transmission
• Clear Voice Capture – Qualcomm 3 mic cVc separates your voice from environmental noise

Designed by Hi-Fi Engineers, Made By Music
We’re obsessed with helping your music sound its best. M100 are our 3rd gen wireless headphones – so we’ve had a chance to really polish them.

aptX Lossless and customisable EQ settings get the most from your music. And so you don’t miss a beat – or a call – in busy areas, we added aptX Adaptive and Bluetooth 5.3 tech. They give a more stable connection for interruption-free listening.

Adaptive hybrid ANC keeps the everyday at arms-length, so you can escape into your own world. Simple touch controls, a comfy fit, and a battery that goes way beyond the ordinary round things up.

Feel Every Beat
Melomania M100 feature two generous 10mm drivers and magnets made from recycled Neodymium. The resulting powerful, but controlled, sound is one that maintains your music’s energy without sacrificing detail – regardless of genre.

Experiment with the choice of ear tips for the best seal, and to keep the sound firmly where it belongs.

Music First
Everyone deserves a great soundstage, low distortion, and high dynamic range. It’s what makes recorded music come alive.

Melomania M100 use Class AB amplification, the same type found in many of our award-winning amps, to deliver the authentic sound quality we’re known for – even when you’re on the go.

Let’s Get Personal
We’ve tuned M100 to deliver our authentic signature Cambridge sound, but we know many people have their own style.

We’ve specified a 7-band graphic equaliser in the all-new Melomania Connect app to build your own custom EQs. Plus, we’ve included 6 pre-set profiles for different music genres or spoken word listening.

Keep the Outside Out
M100 feature adaptive hybrid ANC, which uses information from Feed Forward mics, for external sound, and Feed Back mics, that detect unwanted sound in your ear canal. It automatically adjusts the noise cancellation level based on sound ingress and tightness of fit in the ears.

Enjoy music, podcasts, and calls, uninterrupted by irritating background noise.

Let the Outside In
Activate Transparency mode and shift your attention to what’s going on around you.

With Melomania M100, you can tune into the sound of your surroundings, hold conversations, and listen to public announcements – all without removing your earphones or pausing your playlist.

All Day and All of the Night
M100 continue our tradition of consigning battery anxiety to history, with up to 10 hours of continuous playback possible from a full charge – even with ANC on.

The compact, Qi wireless-compatible charging case stores an extra 23 hours (ANC on) – a lot more albums, podcasts, videos and calls! Take a 10-minute coffee-break charge for a 1.5-hour energy boost.

Your Fit, But You Know It
We supply 5 pairs of ear-tips with every pair of M100 – S & L in premium memory foam or S,M,L in silicone. Experiment to find the best combination for fit, seal and, of course, comfort.

So, whether you’re working, commuting, or simply listening to music, you’ll barely notice you’re wearing them.

High-Tech. As Standard
aptX Lossless works with compatible devices to deliver bit-exact, CD-quality audio with no compression, whilst aptX Adaptive automatically adjusts to keep the music going in busy areas like railway stations at up to 24bit/96kHz.

Bluetooth 5.3 adds extra capacity, speed, stability, and efficiency over its predecessors, helping music, podcasts, video, games and calls to sound their best.

London Calling
When you buy new headphones, they need to be great for calls too. M100 use 3-microphone cVc, a system developed by Qualcomm that helps your voice stand out above environmental noise.

A series of convenient features like Multipoint Connection, Siri and Google Assistant compatibility, reduced-latency gaming mode, and our new Melomania Connect app complete the story.

Designed for Life
Like all our products, Melomania M100 are made to last. They’re designed in London, so IPX4 water resistance was a must. Their compact case protects and charges them in your pocket. The packaging is 100% recyclable and free from plastic.

Technical Specifications:
• HIGH-PERFORMANCE AUDIO MODE: Class A/B amplification
• DRIVER: 10mm Driver Recycled Neodymium Magnets
• BATTERY PLAY TIME (EARBUDS): Up to 16 hours
• BATTERY PLAY TIME (EARBUDS - ANC ON): Up to 10 hours
• BATTERY PLAY TIME (TOTAL): Up to 52 hours
• BATTERY PLAY TIME (TOTAL - ANC ON): Up to 33 hours
• CHARGING TIME: 2.5 hours
• WIRELESS CHARGING: Yes - Qi charging
• POWER SUPPLY: USB-C, Wireless charging
• FAST CHARGE: 10 mins charge = 1.5hrs ANC On | 2.4hrs ANC Off
• NOISE ISOLATION: Qualcomm™ Adaptive Active Noise Cancelling
• TRANSPARENCY MODE: Yes
• MICROPHONES: 6 microphones, 3 per earbud
• VOICE PROCESSING: 3-microphone Qualcomm® cVc™ Echo Cancelling and Noise Suppression (ECNS)
• MELOMANIA CONNECT APP: Compatible
• VOICE ASSISTANT ACTIVATION: Siri / Google Assistant
• IPX RATING: IPX4 water splash resistant
• FIRMWARE UPGRADABLE: Yes
• BLUETOOTH VERSION: Bluetooth 5.3
• TRIPLE-CORE PROCESSOR ARCHITECTURE: Qualcomm QCC3071, Powerful tri-core processor architecture – supporting complex use cases Dual core 32-bit processor application subsystem (up to 80MHz) Single core 240 Mhz configurable Qualcomm® Kalimba™ DSP audio subsystem
• SUPPORTED PROFILES: A2DP, AVRCP, HSP, HFP
• SUPPORTED CODECS: aptX™ Lossless, aptX™ Adaptive, AAC, SBC
• WEAR DETECT: Yes
• LOW LATENCY: <80ms - Gaming Mode accessible via Melomania Connect
• NOISE CANCELLATION: Qualcomm™ Adaptive Active Noise Cancelling
• WIND NOISE REDUCTION: Yes
• GOOGLE FAST PAIR: Yes
• ADJUSTABLE EQ: Yes - 7-band adjustable EQ accesible via Melomania Connect
• OPERATING TEMPERATURE: 0°C to +40°C / 32°F - 104°F
• OPERATING RELATIVE HUMIDITY: 10 to 80%, Non-condensing
• DIMENSIONS (EARBUDS): 22 x 19.2 x 23mm
• DIMENSIONS (CHARGING CASE): 44.5 x 80.2 x 27mm
• WEIGHT: Earbuds: 6.65g each / 0.235 Ounce Charging case: 53.3g / 1.880 Ounce Total: 66.6g / 2.35 Ounce
• WHAT'S IN THE BOX?: Quick Start Guide, USB-C to USB-C charging cable, 3 x silicone eartips (S, M & L), 2 x memory foam eartips (S & L), Brand booklet, Function controls card, Safety instructions

AIAIAI introduces world’s first professional wireless studio monitor

UNIT- 4 frees the music creation process with battery powered portability and ultra-low latency wireless audio.
With UNIT-4, what was previously confined to the traditional studio is now liberated in the hands of the creator, enabling them to break free from boundaries. Whether at home, on the road, or with friends, UNIT-4 allows for freedom of movement and increased opportunity for collaboration.

AIAIAI brings innovation in audio technology and acoustic design that packs professional studio monitor performance into a compact size of only 2.5kg. UNIT-4’s advanced wireless technology allows for wireless, uncompressed audio with only 16ms of latency. Three different modes of connection means complete versatility in one speaker with Wireless+ ultra-low latency, Bluetooth and cabled options. Designed from the inside out without using glue, UNIT-4 allows for total disassembly and component replacement, and is made from 100% recycled plastic.

The introduction of UNIT-4 is AIAIAI’s latest step in expanding its family of products using the W+ Link technology, which began with the introduction of the TMA-2 Wireless+ headphones in December of 2021. The W+ Link has been specifically developed for wireless audio with ultra-low latency in a stable and robust connection, designed for enhanced freedom for music making.

The UNIT-4 Wireless+ studio monitors allows creators to finally break free from the cable and expand their creative freedom. Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables.
Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

The key features uniquely designed for enhanced freedom and set UNIT-4 apart from other speakers are the following:

Complete wireless freedom
• Battery powered with 20H+ of playback time
• W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
• Complete wireless freedom - both audio and power cables

Reference monitor performance
• 2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
• Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
• Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
• Precise soundstage and point-source accuracy provided by the minimal front panel design, incorporating a directivity controlling tweeter waveguide
• Stage monitor design enables you to place the speaker upright or angled horizontally, to optimise your sound field in changing workspaces
• Shape UNIT-4’s sound to your environment or preference using the AIAIAI app customisable 5-band EQ

Portable, compact and rugged
• Size and weight of only 3 litres / 2.5kg
• Rear bass vent designed to be a comfortable carrying handle when on the move
• Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything
• W+ Link - use the X02 transmitter for low latency wireless music creation
• Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
• Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design
• Main components produced from 100% recycled plastics, from post-consumer sources
• Designed for disassembly in a glue-free design - take the whole speaker apart using twoscrewdrivers
• Replace worn out components including battery and drive units
• Future-proofed for new technologies with upgradeable wireless electronics

WHAT’S IN THE BOX?
• UNIT-4 Wireless+ Studio Monitor

TECHNICAL SPECIFICATIONS:
UNIT-4 AUDIO
• Response: +/-2dB 50Hz-20kHz
• Low cut-off: 40Hz
• Peak SPL: 104dB
• Enclosure: Bass reflex
• Woofer: 4 inch high excursion
• Tweeter: 1 inch silk dome
• Crossover: 3kHz
• Amplifier: Class D 2x 80W peak
• DSP: Loudness adaptive bass EQ
• EQ adjustment: 5-band (AIAIAI app)

UNIT-4 AUDIO CONNECTIONS
• Low latency audio: AIAIAI W+ Link
• Bluetooth version: 5.2
• Analog inputs: 3.5mm aux / 6.3mm balanced

UNIT-4 POWER
• Battery playback time: 20 hours
• Charging time: 2 hours
• Battery capacity: 77Wh
• Power supply: 120-240VAC - 15VDC

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

wireless loudspeaker made to play all your music, from any device. the unmistakably warm and relaxed carlsson sound has returned. pair two or more together for wireless stereo.

• compatible with all music services
• connect any instrument, turntable, gaming console or tv, for a rich sound experience
• pair your OD-11 with orthoplay, the free software remote control app
• ortho remote also available separately for wireless control
• weight: 7500 g
• dimensions: 262 x 272 x 262 mm

OP–Z is a portable 16-track multimedia synthesizer and sequencer with a range of sample and synthesis based sounds. sequence music, visuals, lights and more, all from your OP–Z. iOS and android companion app available.

• preloaded with 16 sample packs, each containing 24 samples
• 12 synthesis based sound engines, for a wide range of sound
• 2 separate fx-buses, shared across all instrument tracks
• fx include delay, reverb, chorus and more
• image, 3D graphics and DMX light sequencing
• dimensions: 212,5 x 57,5 x 10 mm
• weight: 180 g

Emberton is a compact portable speaker with the loud, lively sound for which Marshall is so known. Emberton uses True Stereophonic, a unique form of Marshall's multidirectional sounds. Experience absolute 360° sound that is optimal from every point of view. In addition, the IPX7 speaker is waterproof and offers over 20 hours of portable playing time: ideal for all your adventures.

Monitor II A.N.C. headphones utilise advanced active noise cancelling technology that blocks out the noise. With up to 30 hours of wireless playtime using active noise cancelling technology, or up to 45 hours without, you can keep the music going strong wherever you are. Featuring custom tuned 40 mm dynamic drivers, these headphones produce a signature sound only Marshall can deliver.

MONITOR II A.N.C. KEY FEATURES
• Marshall signature sound
• ANC & Transparency mode
• 30 hours of wireless playtime
• Iconic & foldable design
• M-control button
• Multi-directional control knob

MARSHALL SIGNATURE SOUND
Delivering high performance sound like you’ve never heard before. Monitor II A.N.C. headphones feature custom-tuned 40 mm dynamic drivers that produce a superior signature sound only Marshall can deliver. Bright and crisp highs, punchy mids and deep bass are balanced and clear, no matter the volume.

ANC & TRANSPARENCY MODE
Monitor II A.N.C. headphones utilise advanced active noise cancelling technology that continuously pinpoints and measures ambient noise in order to block out the things you don’t want to hear. Now you can focus on what matters most – the music. Customise the level of noise cancelling you want with the Marshall Bluetooth app.

30 HOURS OF WIRELESS PLAYTIME
Monitor II A.N.C. headphones keep the music going strong with up to 30 hours of wireless playtime with active noise cancelling and up to 45 hours without. If you need to charge in a hurry, you can get up to five hours of wireless playtime after just 15 minutes of charging. Bluetooth technology provides exceptional audio quality and the freedom and convenience to move.

ICONIC & FOLDABLE DESIGN
Monitor II A.N.C. headphones deliver an all-day listening experience with a unique over-ear design. Super soft ear cushions and a plush headband with metal swivel rotation hinges perfectly adapt to any head shape for sealing and comfort. Their compact size and foldable design make them perfect to withstand long days on the road. All while continuing to hold true to the classic Marshall look.

M-CONTROL BUTTON
The multi-function M-Button lets you switch between three different equaliser presets so you can customise your sound for a personalised listening experience. Alternatively, it can be programmed to instantly access your voice assistant for help on the go. It’s up to you.

MULTI-DIRECTIONAL CONTROL KNOB
Play, pause and shuffle your music. Adjust the volume of your device and control phone functionality. All with a few simple clicks.

APP COMPATIBLE
Personalise your settings and access everything the Monitor II A.N.C. headphones have to offer. Customise the level of noise cancelling, monitoring transparency and equaliser settings, and set up your voice assistant.

PRODUCT DETAILS
• PLAY TIME: 30 HOURS WITH BLUETOOTH AND ANC / 45 HOURS WITH BLUETOOTH ONLY
• WIRELESS CONNECTIVITY: BLUETOOTH 5.0
• ACTIVE NOISE CANCELLATION: YES
• CUSTOMISE SOUND: YES

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

WiFi Module for Transparent speakers. Connect your speakers using Transparent WiFi module and stream your music through WiFi. Easy to connect with the AudioCast app. Use your iPhone®, iPad®, Android phone and tablet, Mac® and Windows® laptop and cast music to your Transparent Speakers through your house. With one wireless system you can get a multi-room set up and play music everywhere.

CONNECTIVITY
• Connect your Transparent Speaker to your voice assistant devices such as Amazon Alexa and Siri devices
• Compatible with Airplay 2
• Stream music directly from any device that supports Spotify Connect and Tidal Connect
• Stream music from Deezer, Qobuz, Amazon Music, Napster, Pandora, Tuneln etc. using the iEAST App.

DESIGN
• Dimensions (mm): 54.25 x 54.25 x 13.45
• Color: Black

SOUND
• Wi-Fi: 2.4G and 5G
• Bluetooth: 5.0 and 5.2
• Output: 24bit/192Khz

WHAT'S IN THE BOX?
• iEAST Olio Streamer
• USB Type C Cable
• AUX Cable
• User manual

What is a Wi-Fi Module and what is it used for?
The iEast Olio Wi-Fi Module is a wireless sound streamer that turns your speakers into a Wireless Multi-room sound system by connecting to your home Wi-Fi network. In other words this means that you can play synchronized music in multiple rooms in your home. For instance if you have four speakers in your home, with an easy setup you can then enjoy your music everywhere.

Do I need a Wi-Fi Module to use my speaker?
No, the Wi-Fi Module just gives you the option to stream music using your Wi-Fi and to stream music simultaneously to multiple speakers. You can also play via the built in Bluetooth and through the 3.5 mm cable that is included with your speaker purchase.

Does the Wi-Fi Module work with all networks?
The Wi-Fi Module is compatible with both 2.4G and 5.0G Wi-Fi router.

How does Wi-Fi connection compare to Bluetooth connection?
The biggest difference is that Bluetooth only allows for short-range data transfer between devices. Bluetooth also limits the number of devices that can connect at one time. With Wi-Fi connection, as long as you have a good Wi-Fi connection you can connect multiple speakers and have a long distance between them. Some also think that the audio quality is better when streaming music with Wi-Fi.

Can I use the Wi-Fi Module with my current Transparent Speaker?
Depending on when you bought your speaker, there might be a few extra setups you need to consider.

Small Transparent Speaker:
If your serial number is lower than H1908STS you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the bottom of the Small Transparent Speaker.

Transparent Speaker:
If your serial number is H2103TS or lower you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the back of the Transparent Speaker.
How do I connect to the Wi-Fi Module?

To connect to the iEast Olio Wi-Fi Module, please follow these steps:
1. Download the "iEast Controller" app from App Store or Google Play Store on your smartphone or tablet.
Make sure your device is connected to the same WiFi you want to connect your speakers to.
2. Connect the USB cable to the Wi-Fi Module and to your Transparent Speaker on the rear/bottom panel.
3. Connect the music cable to the Wi-Fi Module and to the Line in socket on the rear/bottom panel.
4. Switch on your speaker and set the volume knob +50% to hear the various sound effects.
5. The Wi-Fi Module should now automatically go to set up mode and you should hear "Now in set up mode..." from the speaker.
6. Open the iEast app and select "Add device" from the menu.

7. Follow the on-screen instructions to connect the iEast Olio Wi-Fi Module to your home Wi-Fi network. You will need to enter your Wi-Fi network name and password.

8. Once the iEast Olio Wi-Fi Module is connected to your Wi-Fi network, it will appear in the iEast app. You can now start streaming music to your Transparent speaker.

9. Repeat the steps to connect multiple speakers.

You can also find video instructions further down on this page.

How do I create a group/multiroom set up?
1. First, follow the previous instructions on how to connect to the Wi-Fi Module.
2. In the "Devices" menu where you can see all your connected modules and speakers, click the small icon that looks like two speakers with a + sign.
3. Simple check each speaker that you wish to add to the group.
4. You should consider clicking the letter L/R/LR in the devices info box, to set your various speakers to a wider stereo mode if they are in the same room. Then you set one or more speakers on one side of the room to L and the other side to R. If you will play music in many rooms you might prefer to have all in LR setting.

How do I get the Wi-Fi Module to set up mode?
To put a previously connected module in set up mode, when its connected and power is on, press the small button on the Wi-Fi Module for about 5 seconds and release. You should now hear "Now in setup mode..."

How do I do a factory reset on the Wi-Fi Module?
Press the small button longer than 5 seconds and release, then you should hear "...has been reset".

Can I connect the Wi-Fi Module to other speaker brands than Transparent?
Yes, as long as the speaker got a USB connection and a line in jack it should be all good to go.

Do I need one Wi-Fi Module to each speaker I'd like to connect?
Yes you do.