DJ Equipment 836 Items

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

2-way bookshelf speakers

And these are comments from audio testers:
• Well tuned and upbeat basslines
• Lively dynamics
• Surprisingly low coloration
• Good transparency and reasonable image depth
• Bass is fast and tuneful, this is what really matters!

Scope of delivery:
• 2x Speaker Box 5
• 2x speaker grill black
• 1x pair of gloves

Features:
• Audiophile bass-reflex design
• Gold-plated speaker terminal (single-wired)
• Simple Wall-mount included
• Magnetically shielded
• Front cover with magnetic attachment
• Speaker-Box Wall Bracket available as an option

Technical Specifications:
• Sensitivity (1W/1m): 86 dB
• Recommended amplifier power: 10 to 150 watts
• Tweeter: 25 mm Ø silk-dome Neodymium magnet
• Woofer: 130 mm Ø fiberglass cone
• Frequency response: 55 Hz - 20 kHz
• Impedance: 4 - 8 Ohms
• Dimensions: W x H x D 160 x 255 x 210 mm
• Weight: 4.2 kg

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

MM Phono Pre-amplifier

Good sound from sound technology
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)

Features
• Amplification and RIAA equalisation for MM cartridges
• Small size allows installation close to record player

107x36x104 (115)mm

Manual: http://www.project-audio.com/inhalt/en/manual/manual_phonoboxmm.pdf

Trendy headphone for iPod & Co

super loud, super lightweight & super cool

A cool headphone for the best possible sound reproduction of portable players, like iPod & Co. Hear it Two offers far better audio quality with higher sound pressure levels and superior looks, than many others. Soft and comfortable ear-cushions are swivel mountedmaking it easy to transport Hear it Two in a flat carry case. A high-quality signal-cable made from oxygen-free copper (HP-OFC) with bending protection and gold-plated jack-plug guarantees trouble free performance. Hear it headphones prove again, that outstanding quality does not need to be expensive.

Features:
• Super loud – super light – super cool
• more SPL with iPod & Co (107 dB)
• Lightweight design (77 g)
• adjustable ear-cushion position
• flat transport possible
• high wear comfort
• 3.5 mm jack plug

Technical Specifications:
• Transducer: 30 mm Neodymium driver (dynamic)
• Head-band: adjustable
• Frequency response: 18-22.000 Hz
• Cable material: HPOFC
• Cable length: 1.2 m
• Sensitivity: 107 dB @ 1mW
• Max. sound pressure level: 130 dB
• Impedance: 32 ohms
• Maximum input power: 50 mW
• Connector: 3.5 mm jack plug
• Weight (without cable): 77 g

Equipment base

Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vib-rations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.

Suitable for:
• Elemental Line
• Essential Line
• Debut Line
• 1Xpression Carbon
• 1Xpression Carbon Classic
• RPM1 Carbon
• RPM3 Carbon

Features:
• Support platform for many turntables or other equipment
• Prevents the transmission of vibrations
• Heavy-weight MDF
• Conical feet with damping ring
• Height adjustable
• Combinable with Cover it E and Cover it RPM 1/3 Carbon
• High gloss piano finish

Technical Specifications:
• Dimensions: 480 x 51 x 390 mm spike feet incl.
• Weight: 4 kg

Equipment base

Ground it deluxe 1 suitable for:
• Xtension 9 Evolution, Xtension 10 Evolution, Xtension 12 Evolution
• Signature 10
• RPM 1 Carbon, RPM 3 Carbon, RPM 5 Carbon, RPM 9 Carbon, RPM 10 Carbon

Features:
• Resonance free placement for turntables & hifi
• Heavy weight base filled with granular damping
• 2 models with adjustable spikes (3 or 4 may be fitted)
• 1 model with height adjustable magnetic feet
• Dark grey piano lacquer finish
• Matches charcoal finish of Pro-Ject turntables

Technical Specifications:
• Dimensions: 500 x 65 (45)x 400 mm incl spikes (without spikes)
• Weight: 11,6 kg

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model RCA-C;
• Interconnect cable, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model RCA-C: 41 cm

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

Micro audiophile stereo power amplifier

Efficient, audiophile & made in Europe!

The new Amp Box S3 offers one stereo RCA input and delivers powerful and room-filling sound to every loudspeaker. The new PCB concept & sophisticated topology achieves less distortion and a better signal to noise ratio. We designed this amp to match the sound characteristics of a tube amplifier as close as possible. Amp Box S3 brings you a rich and musical sound with an analogue touch of warmth into your living room. It is also the perfect solution for your desktop nearfield monitor speakers due to its size and superior spacious sound stage.

Application examples:
• HiFi Amplifier for 10-15 m2 rooms
• Audiophile desktop nearfield monitor amp
• Streamer power amp upgrade
• Multiroom power amp solution
• Home cinema power amp upgrade
• In-wall or celing speaker amp

The new Amp Box S3 is designed and produced in Europe and is available in a black & silver finish.

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

A REBORN CLASSIC.
The PLX-1000 is precision engineered for the booth, drawing on 50 years’ experience of making high-end turntables. This high-torque direct drive turntable is equipped with a classic layout and a rubber-lined, S-shaped tone arm that improves isolation and prevents feedback. It is solidly built for excellent vibration damping and ultra-precise, high grade audio playback.

Featuring next generation improvements, the PLX-1000 is the perfect score for professional DJs and vinyl enthusiasts. Combine this turntable with your Pioneer DJM mixer and get the ideal DJ system set-up.

TURN THE TABLES
The high-torque direct drive makes sure that your tracks reach a rotation speed of 33⅓ rpm in merely 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more). Plus it ensures stable rotation and exceptional control.

PICK UP THE PACE
Unique to this turntable is the multi-pitch tempo control. Next to a standard variable width of ±8%, you can also select a variable width from ±16% and ±50%. A simple reset button instantly reverts to the fixed rotation speed at ±0%.

EASILY CONNECTED
For low impendance and amazing sound quality output, you can easily connect to the professional-grade, gold-plated RCA jacks. Ideal for a DJ on the road, the PLX-1000 has interchangeble power and audio cables.

ncluded Accessories
Turntable sheet
Slip mat and sheet
Dust cover
Head shell
Balance, sub and shell weights
Audio cable
Ground wire

Width
453 mm
Height
159 mm
Depth
353 mm
Weight
13.1 kg
Power Requirements
220-240 V / 50/60 Hz

Drive Method
Quartz lock, servo-type, direct drive
Platter
Aluminium, die-casting diameter: 332 mm
Motor
3-phase, brushless DC motor
Braking System
Electronic brake
Rotation Speed
33⅓-45 rpm
Rotation Adjustment Range
±8, ±16, ±50 %
Wow and Flutter
<0.01% (Measured by obtaining signal from built-in frequency generator of motor assembly.)
Signal-to-Noise Ratio
70 dB
Starting Torque
> 4.5 kg/cm
Start Time
0.3 sec (at 33⅓ rpm)

Arm Type
Universal type S-shape tone arm
Gimbal-supported type bearing structure
Static balance type
Overhang
15 mm
Effective Length
230 mm
Tracking Error
Within 3°
Height Adjustment Range
6 mm
Stylus Pressure Variable Range
0-4 g (1 scale 0.1 g)
Single Cartridge Weight
3.5-13 g

Professional over-ear DJ headphones

Designed to adapt
We’ve listened to feedback from DJs and improved on our previous professional DJ headphones. With newly developed drivers, the HDJ-X7 model gives you clean monitoring even at high volumes. The independent ground wire in the 4-core twisted-structure cable ensures superior left and right channel separation, while the flexible headband means your headphones will be a perfect fit.

The HDJ-X model headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
Thanks to the newly developed 50-mm driver, sound is always crystal clear. Add to that the tight bass notes from the optimised diaphragm, a cable with superior left and right channel separation and the bass reflex chamber, all enabling professional monitoring.

Rigorously tested
Even on the road, your headphones will handle severe conditions and heavy use. Durable metal is used in the moving parts, enabling a strong construction that cleared even the US Military Standard Shock test*.
* MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Various accessories included
The HDJ-X7 comes with a detachable 1.2 m coiled cable and a 1.6 m straight cable, plus an L-type mini-jack to prevent accidental disconnection.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 50 mm dome type
• Cord: 1.2 m coiled cable (3 m extended length) & 1.6 m straight cable

Accessories:
• HDJ-X7
• 1.2 m coiled cable (3 m extended length)
• 1.6 m straight cable
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 36 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 3500 mW
• Weight (without cord): 312 g
• Frequency Range: 5 - 30000 Hz

Over-ear DJ headphones with Bluetooth® functionality

Freedom to move
Move freely with the HDJ-X5BT over-ear DJ headphones featuring Bluetooth wireless technology. This version of our HDJ-X5 DJ headphones removes one more cable from your set-up without sacrificing HDJ-X series sound quality, making it easier for you to prepare tracks anywhere, anytime, unrestrained.

With advanced audio quality, you’ll hear crisp, clear notes and deep, hearty bass tones whether you’re on the street or in the booth. Match your headphones to your gear by choosing from 4 colors – metallic black, metallic red, gold or gloss white. Soft and flexible yet durable enough for life on the road, simply fold up your HDJ-X5BT headphones to transport them easily and enjoy your music in comfort wherever you go.

KEY FEATURES

Wireless tech
Power up and pair with your Bluetooth device to start enjoying your beats – it’s that easy. You’ll get around 20 hours of playback from a 3-hour charge, but if you use your headphones for DJ monitoring or you simply forget to charge them (we’ve all been there) you can also listen via the included 1.2 m coiled cable. Thanks to the built-in microphone, you can talk hands-free on calls when the headphones are connected to your phone.

Crystal-clear sound
Hear every nuance of your beats with the highest possible sound quality thanks to support for Qualcomm® aptX™ audio codec, AAC and SBC. Balanced tuning and bass reflex chambers will deliver excellent sound insulation and bass response so that you never miss a beat.

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Rigorously tested
Take the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.
*MIL-STD-810G

Compact and portable
Fold your headphones to save space in your bag and transport them easily. Combine with the HDJ-HC01 carry case (available separately) to keep them safe on the road and store SD cards and USB drives in one place.

Color coordinate
Complement your look and set-up by choosing from 4 colors – metallic black, metallic red, gold or gloss white.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)

Accessories:
• HDJ-X5BT
• 1.2 m Coiled cable (extended length 1.8 m)
• 6.3 mm stereo plug adapter (threaded type)
• USB charging cable

Specifications:
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Weight (without cord): 319 g
• Frequency Range: 5 - 30000 Hz

Bluetooth:
• Output: Bluetooth® Specification Class 2
• Supported Codec: SBC, AAC, Qualcomm® aptX™, Qualcomm® aptX™ Low Latency
• Version: Bluetooth® Specification Ver. 4.2

Over-ear DJ headphones

Prime sound quality
Hear your tracks loud and clear in the booth and on the move with the HDJ-X5. By taking on board feedback from DJs and analysing many different styles of monitoring, we’ve made sure our new DJ headphone range includes all the features needed for performing at every level. Thanks to the high-quality audio design inherited from our previous professional DJ headphones, you can enjoy distortion-free monitoring, even at high volumes, wherever you go.

The HDJ-X headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
With a new 40-mm driver, hear your tracks loud and clear. The 4-core twisted-structure cable gives superior left and right channel separation and the magnetic circuit is optimised so, thanks to fine noise suppression and elaborate tuning, you can enjoy distortion-free sound.

Rigorously tested
Take the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.
*MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Excellent portability
A compact carry pouch fits snugly around your folded headphones to save space in your luggage and reduce the risk of damage on the road.

Various accessories included
The HDJ-X5 comes with a 1.2 m short coiled cable and an L-type mini-jack, preventing any accidental disconnection during performances.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)

Accessories:
• HDJ-X5
• 1.2 m Coiled cable (extended length 1.8 m)
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 32 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 269 g
• Frequency Range: 5 - 30000 Hz

Professional on-ear DJ headphones

ESSENTIAL AUDIO
These brand-new super-lightweight professional on-ear DJ headphones are so lightweight you might forget you’re wearing them. Specially designed for absolute comfort and tuned to deliver outstanding sound quality for mixing and monitoring music, they’re also built to last.

The HDJ-CX professional on-ear DJ headphones are specially designed to minimize stress to your neck and body while helping you maximize your potential for artistic expression through today’s dance music.
With a minimalist but strong design, and tight, wide-ranging audio, the concept is quite different from the HDJ-X Series headphones, which produce a more spacious sound and feature a chunkier construction. The HDJ-CX model offers you a special experience which could even change your style of DJing.

KEY FEATURES

Lightweight and flexible design
You can wear the HDJ-CX comfortably from your first mix to your last. Weighing just 136 g without the cable, they’re ergonomically designed to minimize any stress to your head, neck, or shoulders. What’s more, the stainless steel headband features a ladder-like structure for extra flexibility and stress resistance so you can easily find your perfect fit.

Tight, wide-ranging sound and superior insulation
The new PEEK-PU-PEEK composite film diaphragm provides tight sound with a frequency response of 5 Hz to 30 kHz. This means you can clearly hear the kicks, snare drums, and hi-hats for precise monitoring and mixing in any environment. The φ35 mm driver units realize the input power to reach 2,000 mW and the bass reflex chambers in the housings improve low frequency response even further while the sound insulators create a higher level of audio insulation, so you’ll hear the full bass sound along with every nuance in the music.

Highly robust construction
Don’t let the lightweight feel of these headphones fool you – they’re rugged and built to last. All the components are extra tough, including the steel core of the headband. Made to withstand the rigors of constant use on the road, they’ve passed demanding tests that other professional Pioneer DJ headphones are subjected to, as well as the stringent US Military Standard MIL-STD-810H Shock test.

Interchangeable cables and accessories
Set your headphones up the way you like by choosing from the 2 supplied cables – straight or coiled. To make sure you never lose your 1/4" plug adapter, clip the adapter holder neatly onto your cable so it’s always at hand. A pair of replacement ear pads are also included, and you can expect them to come in handy eventually because these headphones should serve you well for a long time.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 35 mm dynamic type
• Plug: 3.5 mm stereo mini-plug
• Cord: 1.2 m side mount coil cable (3 m extended length) & 1.6 m straight cable

Accessories:
• HDJ-CX
• 1.2 m Coiled cable (extended length 3.0 m)
• 1.6 m straight cable
• 6.3 mm stereo plug adapter (threaded type)
• Plug adapter holder
• Spare ear pads (1 pair)
• Instruction Manual

Specifications:
• Impedance: 32 Ω
• Sensitivity: 103 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 136 g
• Frequency Range: 5 - 30000 Hz

DJ On-Ear Headphones with Bluetooth® functionality

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Bluetooth® wireless technology
Bluetooth® gives you the freedom to listen to music wirelessly. The built-in microphone enables you to take phone calls and, when you want to start DJing, you can simply connect the included cable to focus on your mix.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), USB charging cable , Precautions for use, Instruction Manual (Quick Start Guide)

Specifications:
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 250 g
• Frequency Range: 5 - 30000 Hz

Bluetooth:
• Output: Bluetooth® Specification Class 2
• Supported Codec: SBC, AAC
• Version: Bluetooth® standard ver. 5.0

DJ On-Ear Headphones

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), Instruction Manual

Specifications
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 215 g
• Frequency Range: 5 - 30000 Hz

5” desktop monitor system

SET THE SCENE
The DM series speakers deliver balanced, punchy bass sound and they can pump out extra power thanks to the new Class D amplifier and 5-inch woofer in each unit. Flick the switch to change from DJ mode to Production mode and the DSP settings will automatically create the best sound for each application.

KEY FEATURES

Advanced design for higher quality sound

1. Class D amplifier
Each DM-50D speaker produces pure, balanced bass sound thanks to a new Class D amplifier with 96kHz sampling DSP.

2. DECO convex diffusers
Another advancement from the DM-40 model comes in the updated design of the DECO convex diffusers which help deliver crystal-clear high frequencies in every direction, so you can enjoy a wide sweet spot and 3D stereo sound wherever you are in the room.

3. Time alignment
The woofer and tweeter are perfectly aligned so you’ll hear all sound frequencies clearly.

4. Grooved ducts
The grooves on the ducts reduce air friction so bass is tight and punchy, even if you position the speakers against a wall. Plus, the curved front edges provide maximum rigidity and minimum resonance for clean audio at any volume level.

5. 5-inch woofer
The 5-inch woofer creates powerful sound without distorting, even if you pump up the volume.

2-way sound mode – optimized for DJing and music production
There’s no need to decide whether you want a set of monitors that are best for DJing or making music, because the DM-50D speakers are perfect for both. Just flip the switch to choose either DJ mode or Production mode and the DSP settings will be optimized for the task, leaving you free to concentrate on your mix.

Easy to use with different DJ or production equipment
With RCA, mini jack, and the newly added TRS input terminals, you can connect different kinds of gear such as DJ controllers and mixers, or the laptop or soundcard you use. Connecting your headphones is simple via the socket on the front panel and the level knob is right in front of you too.

SPECIFICATIONS

Main Features:
• Type: 2-way bass reflex, active monitor speakers
• Tweeter: 3/4” (19 mm) soft dome
• Woofer: 5" (127 mm) fiberglass cones

Accessories:
• DM-50D
• Power cord
• Audio converter cable (3.5 mm stereo mini plug to RCA)
• Speaker cord
• Bottom cushion
• Quick Start Guide
• Precautions for Use
• Warranty

Specifications:
Dimensions (W x H x D):
• Lch: 175 x 262 x 257 mm / 6.89” x 10.32” x 10.12”
• Rch: 175 x 262 x 247 mm / 6.89” x 10.32” x 9.72”
Weight:
• Lch: 3.9 kg / 8.6 lbs.
• Rch: 3.5 kg / 7.7 lbs.
Amplifier Output:
• Lch: 25 W / 4 Ω
• Rch: 25 W / 4 Ω

• Impedance: 10 kΩ
• Power Supply: AC 100-240 V, 50 Hz / 60Hz
• Enclosure: Bass reflex
• Enclosure material: MDF vinyl laminate
• Power Consumption: 25 W
• Power consumption during standby mode: 0.3 W or less

Terminals:
Inputs:
• 1/4” TRS jack x 1 (balanced input)
• RCA pin jack x 1 (unbalanced input)
• 3.5 mm stereo mini jack x 1 (Unbalanced input)
Outputs:
• 3.5 mm stereo mini jack x 1

Mix instinctively with pro-grade features
The DJM-250MK2 has inherited some of the professional features of the popular DJM-900NXS2, such as the Magvel crossfader and Sound Color FX filter. Straightforward controls, a clear layout, and dedicated 3-band isolators let you scratch and mix instinctively.

The dithering technology on this mixer results in warm, high-quality audio from both analogue and digital sources. Plus its built-in sound card lets you connect the mixer to your PC/Mac and use rekordbox to perform with CDJs. Or hook up the DJM-250MK2 to turntables and use rekordbox in combination with our control vinyl to scratch and mix with digital files stored on your computer.

KEY FEATURES

Clear Layout & Magvel faders
The clear layout of the DJM-250MK2’s lower half gives you freedom to perform complicated scratch techniques. Our robust Magvel Faders ensure smooth control over long-term use. 2 metal shafts support the fader knobs, while the contact-free magnetic system is designed to endure millions of movements.

Smooth Mixing
Precise, fluid mixes are a breeze using the mixer’s channel faders, and the 3-band isolators give precision across the highs, mids and lows. You can use them to totally eliminate each frequency range when you turn the knob all the way to the left.

Flagship Filter FX
Each channel comes with its own dedicated Sound Colour FX filter, a feature inherited from the DJM-900NXS2 mixer. Simply turn the knob on each channel to apply the filter, Twist the parameter knob for texture, playing with resonance and tension.

Built in USB Sound Card
Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer’s hard drive.

Performance features
Unlock rekordbox performance features by simply connecting the unit to your PC/Mac. And, if you subscribe to the Creative plan, use Cloud Library Sync for seamless library management across multiple devices, and easily make custom versions of tracks in Edit mode.

DVS control
Make full use of rekordbox's low-latency DVS control for intuitive, smooth scratching.

High-quality sound
Whether you’re playing from digital or analogue sound sources, a warm, high-quality sound is created by the 64-bit digital signal processor using dithering technology.

Two headphone outputs
The DJM-250MK2 lets you plug both an ¼-inch stereo jack and 3.5-mm mini jack. Pick your size or attach 2 headphones when playing back-to-back.

Independent MIC section
Use a microphone and the AUX input at the same time.

Flexible connectivity
The XLR terminal and RCAs deliver premium sound quality on all connections. And the signal GND terminal easily attaches ground wires from analogue turntables.

TRAKTOR DVS control
This mixer supports DVS control of Native Instruments’ TRAKTOR PRO 3 DJ software. Plug your PC/Mac into this unit and use the TRAKTOR SCRATCH control media (control vinyl or CDs) to intuitively control and scratch with digital audio files stored on your computer.
Find out more about the Pioneer DJ Certified program.

Firmware Update Manager
You’ll be automatically notified when firmware updates become available. You can download the Firmware Update Manager.

SPECIFICATIONS

Main Features:
DVS Control:
• rekordbox

Accessories:
• DJM-250MK2
• Power cord
• AC adaptor
• USB cable
• Operating Instructions (Quick Start Guide)
• Warranty

Specifications:
• Width: 230 mm
• Height: 108 mm
• Depth: 320 mm
• Sampling Rate: 48 kHz
• A/D Converter: 24 bit
• D/A Converter: 24 bit
• Power Supply: AC adaptor (DC 12 V)
• S/N Ratio Line: 94 dB
• Frequency Range: 20 - 20000 Hz
• Distortion: < 0.005 % (LINE)

Channels:
• EQ/ISO: 3 band
• EQ/ISO Range: -∞ ~ +6 dB

Performance Control
• Channels: 2
• Sound Colour FX: Filter

Terminals:
Inputs:
• 3 LINE (RCA)
• 2 PHONO (RCA)
• 1 MIC (1/4 inch TS Jack)
Outputs:
• 1 MASTER (XLR)
• 1 MASTER (RCA)
• 2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)
USB:
• 1 USB B port

2-channel Smart DJ controller

Stream, Create, Experience
Start DJing with our easy-to-use DDJ-200 smart DJ controller. Lightweight and compact with a pro-style layout, it’ll help you learn to mix and, if you want to, develop DJing from a hobby into something more. Put your own twist on the music as you mix for friends at parties.

Compatible apps
Connect your smartphone, tablet, or PC/Mac to start mixing. A number of software programs and apps – including rekordbox for iOS/Android, rekordbox for Mac/Windows, WeDJ for iPhone, WeDJ for Android, djay, edjing Mix – are compatible with selected devices. You’ll also have free use of all the features in WeDJ for iPhone that normally require in-app payments.

Compatible streaming services
Depending on your app and device combo, you can mix sounds via streaming services including Beatport, SoundCloud, TIDAL, and even Beatsource.
WeDJ for Android is not compatible with streaming services.

Transition FX
Just starting out behind the decks? Transition between tracks and make it sound professional with the Transition FX feature in WeDJ for iPhone. Choose from 11 effect styles and simply slide the crossfader to the other side to smoothly switch tunes.

Compact lightweight body
The DDJ-200 is lightweight and portable. Leave the speakers at home and play sound from your smartphone, tablet, or PC/Mac’s audio outputs. No outlet handy? No problem. Power the controller via an external battery.

OTHER FEATURES

Switch tracks naturally
Our Phrase Sync feature will analyze and align the positions of 2 tracks. As a result, it will sound natural when you switch between tunes.

Split output
While everybody else hears the master sound through the speakers, you’ll be listening to and cueing the next track on your headphones. Simply plug in split cables to separate the audio.

SPECIFICATIONS:

Main Features:
Compatible DJ Software:
• WeDJ (iPhone/Android)
• rekordbox (PC/Mac)
• rekordbox (iOS/Android)
• djay (iPhone/iPad/Android)
• edjing Mix (iPhone/iPad/Android)

Software System Requirements:
• Visit rekordbox.com for its specifications.
• Visit algoriddim.com for its specifications.
• Visit edjing.com for its specifications.
• Visit App Store for WeDJ(iOS) specifications.
• Visit Google Play for WeDJ(Android) specifications.

Accessories:
• DDJ-200
• USB cable
• Split cable
• Warranty (for some regions)
• Quick Start Guide (WeDJ/rekordbox)
• Quick Start Guide (djay)
• Quick Start Guide (edjing)
• Precautions for use

Specifications:
• Width: 378 mm
• Height: 48.2 mm
• Depth: 208 mm
• Weight: 1.2 kg
• Wireless System: Bluetooth Low Energy

Performance Control:
• Channels: 2
• Deck Control: 2
• Pad FX: Yes
• Filter: Yes
• Transition FX: Yes
• Hot Cues: 8
• Manual Loop: Yes

Fader:
• Fader Start: Yes

Terminals:
• USB: 1 USB B port

An officially licensed Slipmat Set featuring the Pink Floyd 'Dark Side Of The Moon' design motif. Each set of fabric DJ turntable slipmats contain a pair of slipmats. Screen printed on black fabric.

The official Phase Magnetic stickers to maintain your Phase Remotes on top of your record and mix in any situation. Contains 4 Phase Magnetic stickers.

• Steel strip coated with a strong adhesive layer
• Ensures that your Phase Remote perfectly holds to the record
• Designed to fit all your records
• Easy-to-setup

Phase Essential offers the most powerful and reliable setup for all turntable DJs. With your digital needles, get back control of your performance!

This pack includes everything you need to start using Phase (2 Phase Remotes, 1 Phase Receiver, 1 USB Cable, 2 RCA cables & 4 Magnetic Stickers).

Phase Essential is compatible with any DJ software.

● Ready to use: includes cables and Magnetic stickers to maintain the Remotes on the records.
● Plug’n’Play with Serato, Traktor, Rekordbox and Virtual DJ.
● Free Serato DJ Pro HID upgrade included, with new custom features.
● Fits with any turntable and DVS setups (mixers, sound cards).
● Top-notch control for mixing and scratching with zero latency.
● Custom radio protocol ensuring a seamless signal quality in any situation.
● No more rumble: insensitive to vibrations due to heavy bass, crowds, etc.
● Up to 10 hour battery life per Remote.
● Customizable LED strips, can be used as a marker on the record.
● Robust and high quality aluminum built.

-> Minimal setup requirements: Mac OS 10.12 / Windows 10
-> Compatible DVS DJ Software: Serato, Traktor, Rekordbox, Virtual DJ, Djay
-> Audio output: x2 RCA
-> 5V standard USB power supply
-> USB type B
-> Dimensions Phase Receiver : 25 x 124 x 77 mm
-> Dimensions Phase Remotes : 66 x 25 x 8,6 mm
-> Weight: 223 g

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Styli protection caps for VNL cartridges and styli

The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.

The protection caps come in pairs.

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Ortofon fibre brush for cleaning the stylus
For cleaning the stylus, use fiber brush a few times along the cantilever in the direction of the stylus, whenever you play a new record or change sides.

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value