DJ Equipment 898 Items

The Zomo RS-250 XT 7" single case satisfies by its modern design and compact construction.

By the 30/70 divide the recordcase can be comfortably splitted and the content can be separated in 3 pieces. The 2 lockable snap locks can be closed by the including keys to safe the content.

Sheer genius and totally cool! It´s Zomo!

Features Zomo Recordcase RS-250 XT
•Cool Design
•Solid aluminium
•Aluminium profiles
•Chrome angles
•Light weight
•Comfortable handle
•Lockable snap locks
•Interior foam
•Included keys

Technical Data
•Capacity: approx. 250 7" Singles
•Size: 510 x 270 x 240 mm
•Weight: 3,85 kg

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

THE NEW JESSE DEAN DESIGNS JDDPTA

PORTABLE TURNTABLE TONE ARM KIT.



WITH THESE FEATURES:

• 3K CARBON FIBER TUBE AND HEAD SHELL
• BILLET ALUMINUM GIMBAL WITH BALLBEARINGS
• CUSTOM ENGINEERED LIMITED BOUNCE TENSION SYSTEM
• PHONO PRE-AMP INCLUDED
• EASY WIRE INSTALLATION KIT
• Made in SoCal, USA
CAPATABILITY:

NUMARK PT-01
NUMARK PT-01USB
NUMARK PT-01SCRATCH
VESTAX HANDYTRAX
VESTAX HANDYTRAX-USB

Weight 10 oz
Dimensions 10 x 3 x 2 in

Installation Guide:
[youtube https://www.youtube.com/watch?v=kKWMM6O2rRA?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

[youtube https://www.youtube.com/watch?v=bidUVnQ_49k?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE OR OTHER TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The AIAIAI TMA-2 Speaker Unit S02's features include:

• punchy speaker unit (SKU 01002)
• engineered with a titanium coated driver to reduce distortion, and designed with an internal vent allowing the middle bass to be more clear and punchy
• each set contains 2 pcs

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

ROLLTOP BACKPACK III

The Rolltop Backpack III is an extremely rugged, entirely weather-proof and multi-functional backpack that is suitable for a wide variety applications. From carrying your DJ- equipment, to convenient carry-on luggage, or just as a regular daypack, the Rolltop Backpack III does it all well. Its bicycle messenger inspired design features a variable “rolltop” opening that gives you an extra 24 cm when unfolded to fit oversized gear like the Pioneer DDJ-SX2/DDJ-RX, the Numark NS-6, 2-octave keyboard controllers, or even multi-effect pedals.

FITS
Pioneer DDJ-SX2
Pioneer DDJ-RX
Pioneer DDJ-SR
Pioneer DDJ-RR
Pioneer DDJ-S1/T1
Pioneer DDJ-Ergo
Pioneer XDJ-R1
Pioneer XDJ-Aero
Roland DJ-808
Denon MC-7000
NI Kontrol S8
NI KOntrol S4
NI Kontrol S5
Numark NS6
Numark 4Track
Numark N4
Numark Mixdeck Quad
Numark MIxtrack Pro III
Numark IDJPro
Reloop Mixon4
Reloop Terminal Mix 8

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Especially designed to carry the MAGMA CTRL CASE series
Flexible height adjustment through variable Rolltop Closure
Zippered side access laptop compartment with waterproof zippers
Two accessory pockets with waterproof zippers
Ergonomic padded back panels, s-curved backpack straps, chest strap and hip belt
Hand-luggage compatible (up to 56 cm height)

SPECS
+ Outer dimensions: 53-75 x 33 x 20 cm
+ Inner dimensions: 51-70 x 32 x 19 cm
+ Weight: 1,7 kg

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

Cutting-edge engineering and robust construction
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned flat for incredibly accurate sound monitoring across the entire frequency range
Circumaural design contours around the ears for excellent sound isolation in loud environments
90° swiveling earcups for easy, one-ear monitoring
Professional-grade earpad and headband material delivers more durability and comfort
Detachable cable (2 cables included)

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 24,000 Hz
Max Input Power: 1,600 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: (Without cable) 8.5 oz (240 g)
Cable - Detachable: Yes
Cable Includes: 1.2m-3m coiled, 3m straight cablesConnector Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

The new RIOT DJ BACKPACK LITE is the smallest member of our RIOT Pack family and is the perfect DJ and daypack for those who like to travel lite, unobtrusive and with a basic gear setup. The interior layout allows for quick access to numerous storage pouches, with clear organization for your laptop, 12’’ records, headphones, soundcards, cables, accessories and other daily needs. The ultra-compact design meets the personal item requirements of most airlines and can be easily stowed underneath the seat or in the overhead bin.

FITS

Laptop up to 17"
NI Maschine MK3
NI Maschine Micro MK3
Numark DJ2Go
Pioneer DDJ-200
Reloop Spin
Vestax Handytrax
Laptop-Stand
12“ Vinyl
Accessories

BASICS

Heavy duty and 100% waterproof Tarpaulin
PVC-coated zippers
210D Lining lining
PVC-coated zippers
210D lining
Versatile interior layout
180 degree access
Separate laptop compartment
Hidden pocket for documents and personal belongings
Padded back panel with airflow system
Ergonomic backpack straps and adjustable sternum strap
Trolley-sling

SPECS

+ Outer dimensions: (H/B/T): 46 x 33 x 15 cm

+ Inner dimensions: 44 x 32 x 14 cm

+ Weight: 1,1 kg



+ Color: black/bionic-green (Item-No.: 47888 / EAN-Code: 4041212478887)

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

A Digital DJ/Producer looking for a professional, durable case solution for your Rane One? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Rane One, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Rane One
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
72,00cm

HEIGHT
43,00cm

DEPTH
14,00cm

INNER DIMENSIONS

WIDTH
68,80cm

HEIGHT
34,70cm

DEPTH
6,80cm

WEIGHT
2,27kg

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 2,36 kg / 5.192 lbs
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ MC7000
• Reloop Mixon 4

A Digital DJ looking for a professional, durable case solution for your CDJ/ DJM/ Battle Mixers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the CDJ/ DJM/ Battle Mixers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 1,54 kg / 3.388 lbs
EAN 8718969210621
Color Black
Outer Dimensions (W x H x D) cm: 47 x 40 x 14.5 | inch: 18.5 x 15.7 x 5.7
Inner Dimensions (W x H x D) cm: 42 x 35 x 13.5 | inch: 16.5 x 13.8 x 5.3
Material Durashock molded EVA foam
Protection Adjustable EVA padding to customize main compartment to your gear
Extra's Heavy-duty handle
Convenient shoulder strap
Easy grip zipper puller
Fits - Pioneer CDJ-2000NXS2, DJM-900NX2, XDJ-1000MK2, CDJ-900NXS, CDJ-1000MK3, DJM-750 K/S, DJM-800, DJM-850 K/S/W, DJM-900SRT, DJM-T1, DJM-S9, DJM-S3, DJS-1000, DVJ-1000
- NI Traktor Z2
- Numark Scratch, M6 SUB, V7, X7
- Akai MPC2000XL
- Rane Sixty Eight, Sixty Four, MP2015, MP2014, Empath, Sixty One, Sixty Two/Two Z, TTM 56S, TTM 57 MKII, TTM 57SL
- Denon SC5000, SC5000M, S3700, SC2900, SC3900, X1100, X1600, X1700
- Reloop Elite, KUT, RMX-90 DVS, RMX-60, RMX-80, RMP-4
- Allen & Heath Xone 96, Xone PX5, Xone 43C, Xone 42, Xone 62, Xone 92, Xone DB2, Xone DB4, Xone 22, Xone 23C
- Behringer DDM4000
- Gemini CDJ-700, MDJ-1000
- Mixars Quattro, MODEL1
- Technics SH-EX1200
- Vestax TR-1
or similar size mixers and cd players
or check UDG Bag Finder

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

NEW - Now with the alcohol-free Disco-Antistat Ultraclean concentrate!

Practical care set for basic cleaning.

Makes LPs permanently antistatic, with Disco-Antistat Ultraclean Concentrate a concentrate that works deep into the groove and cleans the records gently and thoroughly.

The care set consists of:
• Washing case with inserted brushes made of goat hair.
• Label cover with suspension axle for LPs, singles and 10 inch.
• 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
• Disco-Antistat Mixture replacement bottle suitable for mixing the Ultraclean concentrate
• Funnel and filter with which the liquid is filtered back into the bottle after use.
• Drip stand (drying stand) with collection tray for 15 LPs or singles (slides into the case after use)

Made in Germany!

With a capacity of up to 50 records, the new RIOT LP- Bag 50 is a stylish solution to carry your 12-inch vinyl in comfort and style. Equipped with the same high quality material components the entire RIOT range uses, this bag also matches the new RIOT LP-TROLLEY 50 perfectly and can be easily affixed on to a trolley handle with its trolley sling.

FITS
50 12“ Vinyl
20 7“ Vinyl
13‘‘ MacBook
NI Maschine
NI Kontrol X1/F1/Z1 (inkl. Case)

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
1 cm padding on all sides
PVC-coated (waterproof zippers)
Riveted handles and straps
Soft-fleece lining
Lockable zippers on main compartment
Rubber corner protectors
Ergonomically shaped, adjustable shoulder strap and padded carrying handles
Including trolley-sling to attach on a MAGMA record or equipment trolley
Hand luggage compatible

SPECS
Outer dimensions: 33 x 35 x 20 cm
Inner dimensions: 31 x 32,5 x 16 cm
Weight: 3,7 kg

WiFi Module for Transparent speakers. Connect your speakers using Transparent WiFi module and stream your music through WiFi. Easy to connect with the AudioCast app. Use your iPhone®, iPad®, Android phone and tablet, Mac® and Windows® laptop and cast music to your Transparent Speakers through your house. With one wireless system you can get a multi-room set up and play music everywhere.

CONNECTIVITY
• Connect your Transparent Speaker to your voice assistant devices such as Amazon Alexa and Siri devices
• Compatible with Airplay 2
• Stream music directly from any device that supports Spotify Connect and Tidal Connect
• Stream music from Deezer, Qobuz, Amazon Music, Napster, Pandora, Tuneln etc. using the iEAST App.

DESIGN
• Dimensions (mm): 54.25 x 54.25 x 13.45
• Color: Black

SOUND
• Wi-Fi: 2.4G and 5G
• Bluetooth: 5.0 and 5.2
• Output: 24bit/192Khz

WHAT'S IN THE BOX?
• iEAST Olio Streamer
• USB Type C Cable
• AUX Cable
• User manual

What is a Wi-Fi Module and what is it used for?
The iEast Olio Wi-Fi Module is a wireless sound streamer that turns your speakers into a Wireless Multi-room sound system by connecting to your home Wi-Fi network. In other words this means that you can play synchronized music in multiple rooms in your home. For instance if you have four speakers in your home, with an easy setup you can then enjoy your music everywhere.

Do I need a Wi-Fi Module to use my speaker?
No, the Wi-Fi Module just gives you the option to stream music using your Wi-Fi and to stream music simultaneously to multiple speakers. You can also play via the built in Bluetooth and through the 3.5 mm cable that is included with your speaker purchase.

Does the Wi-Fi Module work with all networks?
The Wi-Fi Module is compatible with both 2.4G and 5.0G Wi-Fi router.

How does Wi-Fi connection compare to Bluetooth connection?
The biggest difference is that Bluetooth only allows for short-range data transfer between devices. Bluetooth also limits the number of devices that can connect at one time. With Wi-Fi connection, as long as you have a good Wi-Fi connection you can connect multiple speakers and have a long distance between them. Some also think that the audio quality is better when streaming music with Wi-Fi.

Can I use the Wi-Fi Module with my current Transparent Speaker?
Depending on when you bought your speaker, there might be a few extra setups you need to consider.

Small Transparent Speaker:
If your serial number is lower than H1908STS you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the bottom of the Small Transparent Speaker.

Transparent Speaker:
If your serial number is H2103TS or lower you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the back of the Transparent Speaker.
How do I connect to the Wi-Fi Module?

To connect to the iEast Olio Wi-Fi Module, please follow these steps:
1. Download the "iEast Controller" app from App Store or Google Play Store on your smartphone or tablet.
Make sure your device is connected to the same WiFi you want to connect your speakers to.
2. Connect the USB cable to the Wi-Fi Module and to your Transparent Speaker on the rear/bottom panel.
3. Connect the music cable to the Wi-Fi Module and to the Line in socket on the rear/bottom panel.
4. Switch on your speaker and set the volume knob +50% to hear the various sound effects.
5. The Wi-Fi Module should now automatically go to set up mode and you should hear "Now in set up mode..." from the speaker.
6. Open the iEast app and select "Add device" from the menu.

7. Follow the on-screen instructions to connect the iEast Olio Wi-Fi Module to your home Wi-Fi network. You will need to enter your Wi-Fi network name and password.

8. Once the iEast Olio Wi-Fi Module is connected to your Wi-Fi network, it will appear in the iEast app. You can now start streaming music to your Transparent speaker.

9. Repeat the steps to connect multiple speakers.

You can also find video instructions further down on this page.

How do I create a group/multiroom set up?
1. First, follow the previous instructions on how to connect to the Wi-Fi Module.
2. In the "Devices" menu where you can see all your connected modules and speakers, click the small icon that looks like two speakers with a + sign.
3. Simple check each speaker that you wish to add to the group.
4. You should consider clicking the letter L/R/LR in the devices info box, to set your various speakers to a wider stereo mode if they are in the same room. Then you set one or more speakers on one side of the room to L and the other side to R. If you will play music in many rooms you might prefer to have all in LR setting.

How do I get the Wi-Fi Module to set up mode?
To put a previously connected module in set up mode, when its connected and power is on, press the small button on the Wi-Fi Module for about 5 seconds and release. You should now hear "Now in setup mode..."

How do I do a factory reset on the Wi-Fi Module?
Press the small button longer than 5 seconds and release, then you should hear "...has been reset".

Can I connect the Wi-Fi Module to other speaker brands than Transparent?
Yes, as long as the speaker got a USB connection and a line in jack it should be all good to go.

Do I need one Wi-Fi Module to each speaker I'd like to connect?
Yes you do.

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let’s you safely store your digital controller (such as the Native Instruments S3/ S4 MK3/ S2 MK3 or Pioneer DDJ-REV1/ 400 or Numark Mixtrack Pro FX) in the main compartment. The UDG Controller Sleeve is available in 3 sizes: Medium, Large & Extra Large skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,70 kg / 3.74 lbs
• EAN: 8717228279225
• Outer Dimensions (W x H x D): 56.5 x 37 x 18 cm | 22.2 x 14.5 x 7.1 inch
• Inner Dimensions (W x H x D): 54 x 34 x 9 cm | 21.3 x 13.4 x 3.5 inch
• Material: Water repellent laminated 600D Polyester exterior

Protection:
• Egg Crate interior protects jog wheels, faders & buttons
• Adjustable foam inserts to customize main compartment to your gear

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• NI Traktor Kontrol S3, S2 MK3, S4 MK3, S5, S2 MK2, S4 MK2, Komplete Kontrol S25,
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-SB3, DDJ-SB2, DDJ-SB, Toraiz SP-16,
• Numark Mixtrack Pro FX, Mixtrack Platinum FX, NVII/ NV, Mixtrack Pro II, Mixtrack Quad, Mixtrack Pro,
• Reloop Beatmix 2 MK2, Beatpad 2, Terminal Mix4, Terminal Mix 2,
• Denon DJ Prime Go, MC6000MK2, MC4000, MC3000, MC2000,
• Akai MPC Live II, MPC Renaissance, APC-40 MKII, MPK225, MPD232,
• Novation AFX, Nocturn 25, Launchkey 25, Impulse 25, 25SL MK2,
• Hercules DJControl Inpulse 300, Universal DJ, DJControl Jogvision/ Air+/ Air+S/ Wave, DJConsule 4-MX, DJConsole RMX 2,
• Korg Minilogue, Taktile 25,
• American Audio VMS 5/ VMS 4,
• Behringer CMD Studio 4A,
• Allen & Heath Xone 4D,
• Livid OHM 64,
• Arturia Origin Desktop,
• M-Audio Xponent, Axiom 25,
• Mixars Primo,
• Gemini G4V DJ, GMX, Slate 4/ 2,
• Roland DJ 202, JP-8080,
• Stanton SCS.4DJ,
• American Audio VMS 4 / 5,
• Vestax VCI-380, VCI-400DJ, VCM 600,
• or similar size controllers,

ATH-PRO5X DJ Headphones - Over-ear style delivers exceptional isolation and long-wearing comfort, Maximum input power of 1,500mW enables operation at higher volume levels and Newly developed 40mm drivers reproduce extended frequency response.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 35,000 Hz
• Maximum Input Power: 1,500 mW
• Sensitivity: 100 dB/mW
• Impedance: 34 ohms
• Weight: 250 g (without cable and connector)
• Cable: -Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable
• Cable: -Detachable 1.2 m (3.9') straight cable
• Accessories Included: 6.3 mm (1/4") screw-on adapter

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

The CTRL Case MPC X is custom designed to a hold the Akai MPC X workstation and is a very lightweight and convenient solution to carry your gear well protected to your next studio session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:

• Akai MPC X
• Akai MPC 5000
• Akai MPC Renaissance

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam padding to protect knobs, faders and pads
• Comfortable, rivet reinforced carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 54,5 x 47 x 12,5 cm
• Inner measures: 51 x 42 x 10 cm
• Weight: 2 kg
• Color: black (Item-No.: 48014 / EAN-Code: 4041212480149)

The CTRL Case Seventy-Two hardshell case is custom designed to hold the new Rane Seventy, Seventy-Two or Pioneer DJM-S11 and Reloop Elite battle-mixer. Crafted from lightweight and rigid Durashock molded EVA shell it’s a very compact and protective carrying solution that fits easily into the overhead bin or under the seat of most airlines.

FITS:

• Pioneer DJM-S11
• Rane Seventy
• Rane Seventy-Two
• Reloop Elite

BASICS:

• Crafted from rigid Durashock molded 6 mm EVA foam and water rejecting polyester exterior shell
• Incl. removable egg crate foam to protect knobs and faders and side padding
• Sturdy zipper
• Comfortable, rivet reinforced carrying handles and detachable shoulder strap
• Incl. foam panel to protect cross and line faders
• Compatible with Decksaver® cover
• Fits inside the MAGMA Rolltop Backpack
• Incl. trolley-sling

SPECS:

• Outer measures: 53 x 35,5 x 13,5 cm
• Inner measures: 44,5 x 28,5 x 11 cm
• Weight: 1,4 kg
• Color: black/black (Item-No.: 48007 / EAN-Code: 4041212480071)

Over-ear DJ headphones

Prime sound quality
Hear your tracks loud and clear in the booth and on the move with the HDJ-X5. By taking on board feedback from DJs and analysing many different styles of monitoring, we’ve made sure our new DJ headphone range includes all the features needed for performing at every level. Thanks to the high-quality audio design inherited from our previous professional DJ headphones, you can enjoy distortion-free monitoring, even at high volumes, wherever you go.

The HDJ-X headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

KEY FEATURES

Outstanding sound
With a new 40-mm driver, hear your tracks loud and clear. The 4-core twisted-structure cable gives superior left and right channel separation and the magnetic circuit is optimised so, thanks to fine noise suppression and elaborate tuning, you can enjoy distortion-free sound.

Rigorously tested
Take the HDJ-X headphones on the road and feel confident they’ll handle severe conditions and heavy use. All the HDJ models have cleared the US Military Standard Shock test* as well as our own stringent stress testing.
*MIL-STD-810G

Comfortable fit
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.

Excellent portability
A compact carry pouch fits snugly around your folded headphones to save space in your luggage and reduce the risk of damage on the road.

Various accessories included
The HDJ-X5 comes with a 1.2 m short coiled cable and an L-type mini-jack, preventing any accidental disconnection during performances.

Replacement parts available
Easily renew the detachable cables and ear pads with replacement parts (sold separately).

2-year warranty
Count on long-term, reliable performance from your HDJ-X headphones. A 2-year warranty has got you covered.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)

Accessories:
• HDJ-X5
• 1.2 m Coiled cable (extended length 1.8 m)
• 6.3 mm stereo plug adapter (threaded type)
• Carry pouch

Specifications:
• Impedance: 32 Ω
• Output Sound Level: 102 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 269 g
• Frequency Range: 5 - 30000 Hz

DJ On-Ear Headphones with Bluetooth® functionality

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Bluetooth® wireless technology
Bluetooth® gives you the freedom to listen to music wirelessly. The built-in microphone enables you to take phone calls and, when you want to start DJing, you can simply connect the included cable to focus on your mix.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), USB charging cable , Precautions for use, Instruction Manual (Quick Start Guide)

Specifications:
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 250 g
• Frequency Range: 5 - 30000 Hz

Bluetooth:
• Output: Bluetooth® Specification Class 2
• Supported Codec: SBC, AAC
• Version: Bluetooth® standard ver. 5.0

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).

Connect it – model series CC

Electrically shielded with conductors made of OFC copper and an additional layer of carbon fibre

Modell Phono RCA-CC:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 75 pF
• Length Model Phono RCA-CC: 123 cm

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

The HD 25 Light are closed, dynamic headphones for monitoring, recording and outdoor applications.

They are extremely comfortable, featuring a minimalistic headband and a unique capsule design, making them an attractive and lower-cost alternative to the HD 25-II. These are also suitable for nightly DJ use.

FEATURES

Closed, supra-aural DJ mixing headphones for use in high noise environments.

Excellent sound reproduction: emphasized bass and lifted treble

Lightweight and comfortable, even if used for long periods of time

Extremely rugged, made for daily use

Capable of handling very high sound pressure levels

Dual-sided, detachable cable, 3m

WHAT'S IN THE BOX?

1 HD 25 LIGHT
1 Screw on jack adapter 3.5 to 6.3 mm

OM Pro S pre-mounted on SH-4 Black
The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

OM Pro S technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 5 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5,0 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g
Replacement stylus unit - Pro S

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

45 RECORD-BAG „DUSTY DONUTS“ EDITION

Specially dedicated to all 45 enthusiasts and vinyl pros, the new MAGMA 45 RECORD-BAG 150 offers an extremely compact and stylish way to travel with up to 150 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. The main compartment is divided into two equal sections, so records can be organized front-to-back or side-to-side.

FITS
150 x 7-inch records
Headphones
Needle-case
Adapters
Slipmats

BASICS
Constructed of water-resistant 1680D Ballistic-Nylon
1 cm EVA padding and integrated PVC walls for ultimate protection
Protective rubber corners
Internal size and divider allows two different storage ways
Two outer accessory pockets for Headphones, needle-case and adapters
Separate mesh pocket for slipmat storage
Convenient carrying-handle and ergonomic shoulder-strap
Trolley-Sling
Strictly limited edition of only 150 pieces worldwide

SPECS
Outer measures: 21 x 39 x 25 cm
Inner measures: 18,8 x 38 x 20 cm
Weight: 1,56 kg

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

The new Clearaudio Turntable Vinyl Harmo-nicer mat: A genius development to improve any turntable sound quality.

This new turntable mat, made out of pure vinyl, will improve the contact between the platter surface and the LP. Every LP-record will sound more dynamic and more authentic. More balanced sound at low frequency and higher definition at middle and high frequency. This is possible becouse of the fact, that the vinyl Harmo-nicer mat is made from pure vinyl and has therefore identical speed propagation velocity as a LP. Tehe overall vibration energy - coused by tracking process - is trasfered with no reflection to teh platter.

The bottom surface of the Harmo-nicer mat is absulutely flat and polished. the top surface of Harmo-nicer mat has a special surface structure, which ensures maximum contact points to the LP-record surface than a regular platter surface.

Highest performace will be achieved if you are using the Clearaudio Outer Limit, Clearaudio Locator and a Clearaudio Record Clamp (e.g. Clever Clamp). The use of the Harmo-nicer turntable platter mat results in a bass control improvement, a better tonal balance. more precision in the middle and high frequencies and a highe overall dynamic.

Please note: While using the Clearaudio Harmo-nicer, you should re-adjust the VTA (Vertical-Tracking-Angle), accordingly to the trickness of the Harmo-nicer. The Harmo-nicer can be cleaned like a normal record, we do recommend to use the clearaudio record cleaning machine Matrix.

Technical specifications:

Outer diameter: 292 mm
Maximum Thickness: 2,4 mm
Weight: 190 g
Material: vinyl

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

A Digital DJ looking for a professional, durable case solution for your NI Traktor Kontrol S4 MK3/ S2 MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor Kontrol S4 MK3/ S2 MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 1,89 kg / 4.158 lbs
• EAN: 8718969213073
• Outer Dimensions (W x H x D): 61 x 38 x 13 cm | 24 x 14.9 x 5.1 inch
• Inner Dimensions (W x H x D): 58.5 x 35.5 x 8.4 cm | 23 x 13.9 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Shoulder strap

Fits:
• NI Traktor Kontrol S4 MK3/ S2 MK3 Controller
• Pioneer DDJ-REV1
• Numark Mixstream Pro
• Behringer RD-8
• Roland DJ-707M

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,75 kg / 3.85 lbs
• EAN: 8717228279850
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 59.3 x 35.3 x 9.0 cm | 23.3 x 13.9 x 3.5 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-RR, DDJ-SB3, DDJ-SB2, DDJ-SR2, DDJ-SR, DDJ-Ergo V
• NI Traktor Kontrol S3, S4 MK3, S2 MK3, S5, S4 MK2, S2 MK2, Maschine Studio, Komplete Kontrol A25, Komplete Kontrol S25
• Numark Mixstream Pro, Mixtrack Pro FX, Mixtrack Platinum FX, Mixtrack Platinum, NVII, Mixtrack Pro 3, Mixtrack Quad, N4, iDJ Pro
• Denon MC4000
• Akai MPC Renaissance, MPK225, MPK25
• Reloop Beatmix 4
• Novation 25 SL MK2, Nocturn 25, Impulse 25
• Roland DJ-707M, System-1 Plug Out Synthesizer
• Hercules DJControl Inpulse 300
• M-Audio Axiom 25
• Allen & Heath Xone 4D
• Mixars Primo
• Alesis Q25, QX25
• Korg Modwave, Opsix

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

The Zomo VS-Box Space is a modern storage solution for LPs. It convinces with its exceptional design and high quality. The surface is laminated with robust and water-repellent decor and available in the colours black, white, Zebrano and walnut. This piece of furniture is a definite eye-catcher in your living room.

Features

Capacity: 100-120 LPs
Exclusive design
Premium quality
Specifications

Dimensions: 460x400x370 mm
Weight: 3,7 kg

This UDG Record Bag is a medium size bag that holds up to 50 12 inch vinyl records. The U9500 is equipped with a removable shoulder strap (padded shoulder pad included), top handles, plus it's foam padded with PVC reinforced walls for extra protection.
Weight: approx. 1.2 kg.
Dimensions: approx. 34 x 29 x 35 cm (13.4 x 11.4 x 13.8 inch).
100% nylon, 840D.

The CTRL CASE XL PLUS is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Numark Mixstream, NI Kontrol S4MK3, Pioneer DDJ-SR2 and many other controller models. Made of lightweight and rigid Durashock molded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

FITS:

• Numark Kontrol S4MK3
• Pioneer DDJ-SR2
• Numark Mixstream
• Hercules Inpulse 500
• Denon MC-4000

BASICS:

• Lightweight Durashock molded 5mm EVA foam and polyester exterior shell
• High density egg-crate foam to protect the displays, jog wheels, and controls
• Sturdy zipper and comfortable carrying handles
• Including detachable shoulder-strap
• Fits inside the MAGMA Rolltop Backpack III

SPECS:

• Outer measures: 59 x 36,5 x 10 cm
• Inner measures: 57 x 33,5 x 8 cm
• Weight: 1,4 kg

Wireless Over-Ear Headphones

The ATH-M20xBT over-ear wireless headphones include all the features you want and the audio quality you demand. Inspired by our #1 selling ATH-M20x wired professional studio headphones and featuring powerful 40 mm drivers for enhanced low-frequency performance, the ATH-M20xBT Bluetooth headphones deliver an incredible listening experience with full-range, high-fidelity audio and enhanced bass.

Enjoy a sonic signature tuned to reflect our wired studio monitor headphones wherever you go. The ATH-M20xBT has a multipoint pairing capability that lets you connect wirelessly to two devices, optimal for multimedia use. The wireless headphones are also equipped with a low latency mode that improves the synchronicity between audio and video for smooth streaming and gaming.

Audio-Technica over-ear headphones provide excellent sound isolation in loud environments. Combining modern design and high-quality materials, the ATH-M20xBT delivers an ideal listening experience for those that put audio first.

The ATH-M20xBT headphones have a long battery life, providing up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection). The microphone and buttons built into the left earcup let you easily control calls, music playback, and volume. Constructed with professional-grade ear pad and headband material, the ATH-M20xBT was built for long-lasting durability and comfort.

Included Accessories: The ATH-M20xBT comes with a 1.2 m (3.9') cable for an optional wired connection.

The Features You Expect - The Studio Sound You Demand
Enjoy all the convenience, comfort and sound of a wireless design. The classic, high-fidelity M20x studio sound with enhanced bass is now yours to take with you wherever you go.

To Keep You Going - 60-Hr Battery Life
With the ATH-M20xBT headphones your music is always there for you. A full charge gives you up to 60 hours of playback, a 10-minute rapid charge provides up to 3 hours.

Best of Both Worlds - Wired or Wireless
The ATH-M20xBT comes with a detachable audio cable so you can use the headphones with a standard wired connection whenever you want or need to.

Features:
• Wireless, on-the-go design delivers the same sonic signature as the wired ATH-M20x professional studio headphones
• 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection)
• Microphone and buttons built into the left earcup let you easily control calls, music playback, and volume
• Over-ear design for excellent sound isolation in loud environments
• Professional-grade earpad and headband material for long-lasting durability and comfort
• Includes 1.2 m (3.9') cable for optional wired connection

Specifications Headphones:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 32,000 Hz
• Sensitivity: 100 dB/mW
• Impedance: 36 ohms
• Weight: Approx. 216 g (7.6 oz)
• Charging Time: Approx. 4 hours*
• Operating Temperature: 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time: Continuous transmission time (music playback): Max. approx. 60 hours*
• Microphone Sensitivity: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 to 20,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Power Supply: DC 3.7 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12”), USB Type-A / USB Type-C). Audio cable (1.2 m (3.9’) /3.5 mm (1/8”) gold-plated stereo mini-plug (3 pole/L-shaped))
(Notes: For product improvement, the product is subject to modification without notice.)

Specifications Bluetooth®:
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight - approx. 10 m (33')
• Maximum RF Output: 10 mW EIRP
• Frequency Band: 2.402 GHz to 2.480 GHz
• Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method: FHSS
• Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
• Support Codec: AAC, SBC
• Supported Content Protection Method: SCMS-T
• Transmission Band: 20 to 20,000 Hz

* The above figures depend on operating conditions.

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

factory – melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in arpeggio and chord play styles
parameter locks.
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-14/en

sub – bass line synthesizer and sequencer with parameter locks, punch-in effects and play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in bass oriented play styles
parameter locks
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-12/en

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 г (12.5-17.5 мН)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 310 Universal
*) Typical value