DJ Equipment 758 Items

To clean your vinyl records thoroughly, it is important to place them on a soft, dirt-free surface. With the cleaning mat for vinyl records, HHV has created a solution that makes caring for your vinyl even easier.
Place the record in the middle of the cleaning mat and use Vinyl Care products such as the practical cleaning roller to remove dust and dirt from your vinyl. CDs or DVDs can easily be placed in the corner of the mat. The use of a plastic adapter is recommended for cleaning 7-inch records.
All Vinyl Care by HHV products are developed with direct feedback from our customers and offer innovative solutions for the care and storage of vinyl records.

Black through-dyed and not printed paper inner sleeve for storing 12 inch records. This inner sleeve is lined with anti-static high density polyethylene (contains no additives and softeners that could react with the vinyl). Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 30.5 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 12" Vinyl LP Innenhüllen (anti-static) with angled corner cut - specific details:

• measures: 301/304 x 309 mm
• material: 110 g/m² black premium paper and polyethylene
• made of unbleached pulp, ash- and acid-free, contains no recycled content and develops virtually no dust even when frequently inserting and removing the record
• die-cut diameter: 80 mm centered
• anti-static
• with lengthened rear lip to facilitate opening
• Made in Germany
• selling unit: 50 pieces

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

chateau vinyl solo | nylon olive stealth edition

chateau vinyl offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: olive

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Made from 21 oz FattEz™, the HHV Logo Slipmats are perfect for precise DJing activities. This 12" slipmat is made from the highest quality poly felt material that's very similar to the thick felt of old school Technic slipmats. The HHV Logo Slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface. Perfect for the mix/club DJ as well as turntable and audiofile enthusiasts.

• Weight: 21 oz;
• thickness: 0.125 inch.
• 100% polyester felt.
• Made in USA

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

Black through-dyed and not printed paper inner sleeve for storing 12 inch records. This inner sleeve is lined with anti-static high density polyethylene (contains no additives and softeners that could react with the vinyl). Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 30.5 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 12" Vinyl LP Innenhüllen (anti-static) without angled corner cut - specific details:

• measures: 301/304 x 309 mm
• material: 80 g/m² black premium paper and polyethylene
• made of unbleached pulp, ash- and acid-free, contains no recycled content and develops virtually no dust even when frequently inserting and removing the record
• die-cut diameter: 80 mm centered
• anti-static
• with lengthened rear lip to facilitate opening
• Made in Germany
• selling unit: 50 pieces

Black through-dyed and not printed paper inner sleeve for storing 12 inch records. This inner sleeve is lined with anti-static high density polyethylene (contains no additives and softeners that could react with the vinyl). Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 30.5 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 12" Vinyl LP Innenhüllen (anti-static) witouth angled corner cut - specific details:

• measures: 301/304 x 309 mm
• material: 110 g/m² black premium paper and polyethylene
• made of unbleached pulp, ash- and acid-free, contains no recycled content and develops virtually no dust even when frequently inserting and removing the record
• die-cut diameter: 80 mm centered
• anti-static
• with lengthened rear lip to facilitate opening
• Made in Germany
• selling unit: 50 pieces

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, with hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Blank, unprinted cardboard sleeve for storing 12 inch picture disc records. This cover is equipped with a large centered die-cut hole, so artwork is available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl LP Picture Cover (Black) - specific details:

• measures: 315 x 312 x 3 mm
• material: cardboard, 300 g/m²
• die-cut diameter: 260 mm centered (single-sided)
• selling unit: 10 pieces
• Made in Germany

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Black through-dyed and not printed paper inner sleeve for storing 12 inch records. This inner sleeve is lined with anti-static high density polyethylene (contains no additives and softeners that could react with the vinyl). Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 30.5 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 12" Vinyl LP Innenhüllen (anti-static) with angled corner cut - specific details:

• measures: 301/304 x 309 mm
• material: 80 g/m² black premium paper and polyethylene
• made of unbleached pulp, ash- and acid-free, contains no recycled content and develops virtually no dust even when frequently inserting and removing the record
• die-cut diameter: 80 mm centered
• anti-static
• with lengthened rear lip to facilitate opening
• Made in Germany
• selling unit: 50 pieces

Whether music cassettes or radio plays - cassettes are real collector's items that are worth storing well and presenting attractively. Our cassette rack is made of black lacquered pine wood and offers space for a total of 48 cassettes in three rows.
Vinyl Care by HHV stands for practical storage and cleaning products for music lovers. All products in the series impress with their clear design and uncompromisingly good quality.

Dimensions: 385 x 385 x 50 mm

Black through-dyed and not printed paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 mm x 180 mm
• material: 80 g/m² black premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 50 pieces
• Made in Germany

Minor IV’s straightforward design lets you focus on what matters most – the music. These earbuds cover all bases so you can dive into Marshall signature sound wherever you go. Packing 30+ hours of wireless playtime with the case, means you have more than a day to get lost in your favourite music or podcast. Add our intuitive, water-resistant earbud design to the mix, and you’ll enjoy every beat in complete comfort.

MINOR IV KEY FEATURES
• Marshall signature sound
• 30+ hours of wireless playtime
• Designed for comfort
• Customise your sound
• Earbuds that last longer
• Bluetooth LE Audio-ready

MARSHALL SIGNATURE SOUND
Marshall signature sound always takes centre stage in our products and Minor IV is no different. These earbuds are acoustically tuned to unleash an expertly balanced sound that commands attention.When you need to take a break from the music, their superior call quality means you can always pick up the phone without any distractions.

30+ HOURS OF WIRELESS PLAYTIME
These earbuds hold up to 7 hours wireless playtime on their own. Paired with the portable charging case they can power you for 30+ hours in total. Simply slip the earbuds into the case when you want an extra boost.

DESIGNED FOR COMFORT
To keep the session going, Minor IV features a re-designed earbud and stem, angled to create a truer fit inside the ear canal. They're also water-resistant so the music doesn’t have to stop when it rains.

CUSTOMISE YOUR SOUND
Minor IV comes with mirrored touch-sensitive earbuds, so you can use either one to control your music and phone calls. Removing and inserting an earbud also initiates the auto-pause and play feature.

EARBUDS THAT LAST LONGER
Our in-app battery preservation feature enables you to reduce how quickly your battery ages. Downloading our Over-the-Air (OTA) updates means your earbuds always have the latest software so that you can get more out of them for longer.

BLUETOOTH LE AUDIO-READY
This future-proof technology will deliver higher audio quality, while increasing streaming range and improving audio sync.

90% RECYCLED PLASTIC
Minor IV’s design consists of 42% plastic. Almost all the plastic used, 90% to be exact, is made from post-consumer recycled plastics from preloved products such as CDs, washing machines, and electric bicycles.

PRODUCT DETAILS
• PLAY TIME:7 HOURS IN EARBUDS / 30+ TOTAL HOURS IN CASE
• CUSTOMISE SOUND: YES
• WIRELESS CHARGING: YES
• BLUETOOTH MULTIPOINT CONNECTIVITY: YES

SPECIFICATIONS:
AUDIO:
• DRIVER TYPE: DYNAMIC
• DRIVER IMPEDANCE: 32 Ω
• FREQUENCY RANGE: 20-20,000 HZ
• DRIVERS: 12 MM

BATTERY:
• PLAY TIME: 7 HOURS IN EARBUDS / 30+ TOTAL HOURS IN CASE
• BATTERY PRESERVATION: YES
• WIRELESS CHARGING: YES
• QUICK CHARGING: 15 MINUTES GIVES 3 HOURS OF PLAYTIME
• CHARGING TIME: 1.1 HOURS TO RECHARGE EARBUDS / 2 HOURS TO RECHARGE CASE

CONTROLS AND CONNECTIVITY:
• WIRELESS CONNECTIVITY: LE AUDIO-READY
• WIRED CONNECTIVITY: NO
• CONNECTIVITY: BLUETOOTH
• BLUETOOTH RANGE: 10 M / 30 FT
• CUSTOMISE SOUND: YES
• CONTROLS: TOUCH RESPONSE
• VOICE COMMAND: NO
• MICROPHONE & REMOTE: YES
• ACTIVE NOISE CANCELLATION: NO
• TOUCH RESPONSE FUNCTIONS:
- CONTROL YOUR MUSIC, RECEIVE
- REJECT AND END CALLS
- CONTROL VOLUME, VOICE ASSISTANT OR EQ PRESET
• MIRRORED CONTROLS: YES

COMPATIBLE APPS:
• APPS: MARSHALL BLUETOOTH APP

PHYSICAL UNIT:
• WEIGHT: 7.39 G / 0.26 OZ
• WATER RESISTANCE: IPX4 IN EARBUDS
• COLORWAYS: BLACK
• COLLAPSIBLE: NO
• HEADPHONE TYPE: IN-EAR

INCLUDED IN THE BOX:
• MINOR IV TRUE WIRELESS HEADPHONES
• CHARGING CASE
• USB-C CHARGING CABLE
• USER MANUAL, AND LEGAL AND SAFETY INFORMATION

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

Woburn III is guaranteed to fill any space with immersive, home-shaking Marshall signature sound. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume. Woburn III is ready for the future of Bluetooth technology and has been built ready to deliver next-generation Bluetooth features the moment they are available.

WOBURN III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising of high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA + HDMI)
With so many ways to connect to Woburn III, getting the right sound for listening to music or watching TV has never been so effortless. Connect to your speaker directly from your device using Bluetooth, RCA or 3.5 mm input. Woburn III also has an HDMI input, which allows you to connect Woburn III to your TV for a uniquely Marshall viewing experience.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 90 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15W CLASS D AMPLIFIERS FOR THE MIDS
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT
• HDMI INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 400 X 317 X 203 MM / 15.75 X 12.48 X 7.99 IN

The cleaning roller offers you a time-saving and effective way to clean your records. Dust and dirt simply stick to the silicone surface of the roller. It is very easy to use: Carefully place the record on a clean, soft surface such as the Record Cleaning Work Mat from the HHV Vinyl Care series. Hold the cleaning roller by the handle and place the silicone roller on the record. Carefully roll over the entire surface of the record, changing direction several times.
To remove dust and dirt from the Record Cleaning Roller, wash it with lukewarm soapy water. Allow it to dry completely before using it again and store it in the storage box provided. Sunlight and chemical cleaning agents damage the roller and should therefore be avoided at all costs.
As part of the Vinyl Care series from HHV, we have developed the record cleaning roller especially for the needs of vinyl collectors. We incorporate the experience of our customers directly into product development.

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

LP Winkel im Doppelpack 2er Set aus Kunststoff für 80 LPs

317 x 317 x 160 mm

Schrauben für die Wandmontage sind nicht im Lieferumfang enthalten.

Now NEW with changed recipe - without alcohol!

With the purchase of the DISCO-ANTISTAT MIXTURE, you have taken a decisive step towards cleaning and caring for your valuable records.

As of today, you can effortlessly clean old and heavily soiled vinyl records thoroughly and make them antistatic. Even vinyl records that have been played wet can be played back dry.

But even new vinyl records become immediately antistatic by a bath in the DISCO-ANTISTAT MIXTURE, even with sensitive measuring devices a static charge can no longer be detected.

Now also very suitable for shellac records!

Made in Germany!

minirig MRBT-4 Bluetooth Speaker

The only Speaker you will ever need with an unbelievable 100hrs of battery life!

Experience the culmination of 12 Minirig light years of evolution in design and functionality with the groundbreaking Minirig 4.

Minirig MRBT-4 Bluetooth Speaker - features/specs:

• Dimensions: W = 101.6mm H = 73mm
• Weight: 563g
• Driver: Custom 70mm with neodymium magnet
• Button x3: Power/volume/pairing/and more
• Frequency response: 60Hz - 18000Hz
• Battery life max volume: 5 Hours
• Battery life average use: 30 Hours
• Battery life low volume: 100 Hours
• Charge time (standard): 4 hours
• Charge time (fast USB-C PD): 1.5 hours
• Powerbank function: Yes
• USB-C Power Delivery: Yes (up to 30W)
• Amplifier power: 1 x 50Wrms
• Bluetooth: 5.0 with AAC, hands-free calling, linkup mode & wireless stereo
• Bluetooth Receiver Mode: Yes (line out / headphones)
• Bluetooth Range: >10-30 meters line-of-sight
• Audio input/output: 2 x 3.5mm mini jack socket
• Construction: Anodised aluminium and High Impact ABS
• Weatherproofing: Splash resistant
• Additional features: Volume control, Balance control, Accelerometer, microphone, 5x addressable RGB LEDs, USB-C PD capable, OTA updatable
• App: IOS, Android and Chrome (PC/MAC)

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

With this 45 RPM adapter, you can place your single records exactly in the center of the turntable. The elegant black, durable adapter is made of high-quality aluminum and coated with an alloy. It has a diameter of 3.8 cm and is 1.2 cm high.
The adapter for 7-inch records is suitable for any record player and is a valuable accessory for professional use and vinyl enjoyment at home.
The Vinyl Care by HHV product range is constantly being expanded based on our customers' experiences and is aimed at passionate vinyl collectors.

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

12" Dividers for LP collections, black

• 320 x 350 mm
• Rounded edges
• One side matt/sand-blasted, one side glossy/smooth
• Can be labelled with felt markers, writing can be removed with alcohol
• 10 units weigh around one kilogram
• Made in Germany

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

45 SANDWICH Record-Bag

Designed for dedictated 45 vinyl-DJs, the all-new MAGMA 45 SANDWICH offers a remarkably sleek and lightweight innovation for carrying your 7“ records.

Constructed with a fully molded, shock-absorbing EVA shell, this case ensures superior protection and a secure fit for up to 150 7“ records.

The unique 50/50 "Sandwich" style enables the lid to serve as a second storage section, making organizing and flipping through your 45s more convenient. Tailored for seasoned 45 collectors on the move, the 45 SANDWICH seamlessly combines style and functionality, ensuring a solid and efficient travel companion for your musical treasures.

​Also available as strictly limited FUNKFREAKS and DUSTY DONUTS Edition!

FITS:
• 120-150 x 7“ records

BASICS:
• Compact and lightweight design
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting 1680D Polyester exterior shell
• Molded interior for additional protection
• 50/50 Sandwich style enables the lid to serve as a second storage section
• Sturdy zipper
• Embossed molded feet
• Including shoulder strap (with metal hook)
• Including trolley sling

SPECS:
• Outer dimensions (H/B/T): 38 x 22 x 24 cm
• Inner dimensions: 33 x 19,5 x 20 cm
• Weight: 1,1 kg

Stanmore III has an even wider soundstage than its predecessor, delivering home-filling Marshall signature sound, re-engineered for a more immersive experience. The two-way driver system delivers a heavy but balanced sound, with crisp, soaring treble and controlled bass that really roars. Easily connect to this speaker from your device using Bluetooth, RCA or 3.5 mm and get listening.

STANMORE III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA)
With next-generation Bluetooth 5.2, the RCA input and the 3.5 mm input, connecting to Stanmore III and getting the right sound has never been so effortless. Connect to your speaker directly from your device the way you want to.

PRODUCT DETAILS

POWER AMPLIFIERS:
• ONE 50 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT

TOP PANEL CONTROLS
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 350 X 203 X 188 MM / 13.78 X 8.00 X 7.40 IN

Two-Channel Analogue Rotary Mixer

WARM2 is a professional two-channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring two phono/line channels and a micro/line channel, classic sharp filters, a 4th order Isolator and a narrow portable format, it will deliver a warm and crystal clear analogue sound. All circuits are strictly designed, mounted and tested at Ecler facilities in Barcelona, in order to offer the best professional grade in quality and reliability. With over 50 years of experience in analogue audio design and for the first time after 13 years, Ecler proudly presents our WARM2 rotary mixer.

Key features:
• 2+1 Mixing channels
• 1 MICRO input
• 2 PHONO inputs
• 3 LINE inputs
• Master Output (HOUSE) on XLR and RCA connectors
• Booth Output on RCA connectors
• 6.3mm J ack and 3.5mm mini-jack Headphone Monitor Outputs
• 3 band full cut EQ for main channels and 2 band full cut EQ for MICRO/LINE channel
• 3 bands isolator (300Hz and 4KHz, -∞ /+12dB, 4th order 24dB/oct )
• Maximum Output without distortion: 21dBV (23dBu)
• Mechanized from a solid block of aluminum knob, without visible screw. Ecler Unique design
• Alps Blue Velvet Potentiometers
• FX Send control and Pre/Post fader selector
• Screen-printed faceplate by selective anodizing
• Wooden side panels included

Technical data:
• Control Mode: Rotary with Alps Blue Velvet Potentiometers
• Phantom Voltage: 18VDC/5mA Max (Default ON)
• MIX and PFL VU-Meter: LED 12 segments (-30dBV ÷ +20dBV)
• Operation Temperature: -5˚C - 45˚C / 23˚F - 113˚F
• Humidity: 20 - 90% RH (no condensation)
• Mains voltage: 90-264VAC 47-63Hz
• Rated power consumption: 30VA
• Dimensions (without wooden sides): 400 x 185 x 100mm / 15.7” x 7.2” x 3.9”
• Weight: 3.6Kg / 7.94 lbs

velvet strip brush

As the most compact speaker in the home line-up, Acton III fits in anywhere, with sound that really stands out. Easily connect to your speaker from your device using Bluetooth or the 3.5 mm input and get straight to listening. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume.

ACTON III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation in the home lineup features an even wider acoustic footprint than before, with Marshall's characteristic surround sound that has been redesigned to give you a more immersive experience. Generation III speakers carry outward-angled treble and updated waveguides to deliver solid sound that's so wide it reaches anywhere in the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 30 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 260 X 170 X 150 MM / 10.24 X 6.69 X 5.91 IN

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The black vinyl stand offers space for storing 40-50 records. It is made of powder-coated metal and is ideal for professional and home use. Measuring 25 x 25 x 23 cm and with its clear design, the stand is an ideal storage option for all records that you want to have to hand quickly.
Under the Vinyl Care by HHV label, we present high-quality care and storage solutions for vinyl collections. We stand for top quality at affordable prices and take feedback from our customers as an incentive to continuously develop our products.

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: black
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

With the set of roll container, register and storage boxes, Record Box is making an attractive offer for passionate vinyl collectors: Buying a set represents a price advantage compared to buying the components individually and offers an uncomplicated and individual solution for the mobile storage of records and more.
When developing the Record Box furniture system, the specific needs of vinyl collectors were directly taken into account. In this way, the storage box and the register box can be easily attached to the rollboard and added to a piece of furniture that is as practical as it is attractive. The register box is the top end and invites you to leaf through the records stored in it.
The three modular pieces are connected using specially developed glue dots that can be easily removed at any time. In the blink of an eye you can create a side table, a roll container, coffee table or record shelf that can be moved freely around the room.
The furniture is made of high quality MDF with a robust melamine coating and offers an attractive price-performance ratio.
The set is available in black and white, offering space for around 200 records and, like the other modules of the Record Box furniture system, is used to implement creative and individual solutions for vinyl storage and presentation.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x78cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x 12-inch 100 register box
• 1x connecting elements glue dots from »Record Box«
• Assembly instructions
• Material: 15 mm MDF with melamine coating - white or black
• Boxes for self-assembly - screwdriver required!

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

Drying stand for vinyl record cleaning.

Made in Germany!

Practical care set for basic cleaning. Lasting antistatic effect with Disco-antistat mixture, a special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Made in Germany!

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Dimensions inside: 34 x 34 x 35 cm
• Weight 4,25 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF - features/specifications:

• color: black
• sturdy frame made of medium density fiberboard for 12 inch records with a plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG SlingBag Trolley Deluxe (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. This limited edition version of the UDG SlingBag Trolley Deluxe comes with enough storage space for your records and additional equipment like headphones, controllers, mixers or other tools. In addition, it's also possible to transport a 15.4 inch laptop in the velvet padded interior compartment. In addition, the HHV x UDG SlingBag Trolley Deluxe has a more stable road position due to the widened wheelbase, which will not throw you off track even when sprinting to the train. Furthermore, the nylon upper material gave way to extremely durable, coated canvas, without sacrificing the rain protection for the vinyl. Easily replaceable foam pads with hook and loop fasteners provide a variable interior that offers maximum protection for approximately 58 x 12 inch records.

HHV x UDG SlingBag Trolley Deluxe - features/specs:

• soft rubber grip
• padded 15,4 inch laptop compartment
• small inner zip bag
• adjustable shoulder strap
• hide-away 3-stage trolley handle
• smooth rolling wheels with quality bearings
• UTX buckle at main compartment
• 2 x side zip pockets e.g. for headphones
• flap pocket with hook and loop fastenr, zip closure on front
• interior replacable padding with hook and loop fasteners
• code combination lock
• exterior dimensions (H x W x D): 470 x 510 x 310 mm
• interior dimensions (H x W x D): 320 x 390 x 200 mm
• weight: ca. 5,5 kg
• exterior fabric: coated canvas
• lining: 420D nylon

Black, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 80 mm centered
• selling unit: 20 pieces
• Made in Germany

Entry-level cartridge for all-purpose use

New DJ? This entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g (per frame)

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

With this cleaning liquid specially adapted to the FLUX-Sonic, you always get the best result!

Weight: 61 g
Size: 3,6 x 2 x 9,2 cm

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum - features/specifications:

• color: black
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. The HHV x UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the HHV x UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The HHV x UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This HHV x UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition) - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

Blank, unprinted cardboard sleeve for storing 2 x 12 inch records. This gatefold sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl Double LP Gatefold Cover (Black) - specific details:

• measures: 315 x 315 x 5 mm
• material: cardboard, 300 g/m²
• black, shining
• selling unit: 10 pieces
• Made in Germany

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, without hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

The Vinyl Set Holder Smart for up to 25 12 inch records is equipped with a purist design and an especially lightweight construction – ideal for installation on the wall in the living room, home studio or record store.

Glorious Vinyl Set Holder Smart 12" - Technical Data:

• Dimensions: 36.4 x 24 x 10.4 cm (L x H x W)
• Weight: 160 g

Glorious Vinyl Set Holder Smart 12" - Features:

• Holds up to 25 vinyls in the 12''-format
• Especially light and stable construction made of metal
• Easy assembly on the wall, incl. fixing accessories
• Supplied without decoration (12'' records)

The Ortofon Record Brush is designed by the Danish Industrial designer Møller Jensen Innovation and Design – the same company who designed the award winning vintage MC Jubilee cartridge, historical Kontrapunkt Series, 2M Series and the Concorde MkII range.

Cleaning your records before every use increases the lifetime of the diamond and improves your listening experience. The Ortofon Record brush safely and effectively removes dust and dirt from the record surface without scratching. • The brush features two rows of tightly bound carbon fiber bristles that are designed to remove dirt and dust from the record surface. Simply brush around the surface of a record after placing it on the turntable.
• Simple and robust two parts design: Injection moulded part uses a conductive plastic preventing any static charges. Shield used to clean and protect the brush.
• Easy to use: slides and locks into place.
• Embossed details for clarity and performance.
• Lanyard hole for convenience and store.

AT-LP60XUSB
Fully Automatic Belt-Drive Turntable (Analog & USB)

• Experience high-fidelity audio of vinyl & convert records to digital files
• Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM
• Built-in switchable phono pre-amplifier for phono- or line-level output
• Improved tracking and reduced resonance for smoother sound
• Integral Dual Magnet™ phono cartridge with replaceable diamond stylus
• Free download of the Mac & PC compatible Audacity recording software

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2') USB cable

Cartridge & Stylus
• Replacement Stylus ATN3600L

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 7" Vinyl Frame MDF (Triple Pack) - features/specifications:

* color: black
• sturdy frame made of medium density fiberboard for 7 inch records with plexiglass cover
• outer dimensions: approx. 220 x 220 x 20 mm
• inner dimensions: 180 x 180 mm
• weight: 330 g (1 frame)

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 7" Vinyl Frame MDF - features/specifications:

* color: black
• sturdy frame made of medium density fiberboard for 7 inch records with acrylic glass cover
• outer dimensions: approx. 220 x 220 x 20 mm
• inner dimensions: 180 x 180 mm
• weight: 330 g