DJ Equipment 670 Items

OM Q.Bert pre-mounted on SH-4 Black headshell
The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Ultra high output
• Low wear characteristics

Tailored specifically for scratch, the OM Q.Bert provides unrivaled tracking ability and sonic characteristics.

Technical Data:
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Flight case for Ortofon Concorde MkII

The Chinese Man "New Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Ramones "Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Tupac Shakur "West Coast" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Mr Bongo Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

• Surface mount LED's for long life
• Illuminates outward - no reflector
• Balanced voltage - no resistors needed
• Easy installation - soldering required
• Comes as a pair - x2 LED circuit boards. (Connect with cables from SL unit.)
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

• Surface mount LED's for long life
• Illuminates outward - no reflector
• Balanced voltage - no resistors needed
• Easy installation - soldering required
• Comes as a pair - x2 LED circuit boards. (Connect with cables from SL unit.)
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Reduced Moving Mass
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.

Expert Adjustment
The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Specifications:
• Frequency Response: 20 Hz -20 kHz ±3 dB
• Channel Balance: within 2 dB @ 1 kHz
• Channel Separation: better than 25 dB @ 1 kHz
• Sensitivity: 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec
• Static Compliance: 24 mm/N (lat); 16 mm/N (vert)
• Equivalent tip mass: 0.45 mg
• Vertical Tracking Angle: 24°
• Stylus Radius: Elliptical
• Stylus Type: Replaceable
• Load Resistance: 47 kΩ
• Load Capacitance: 150-200 pF
• Internal Inductance: 570 mH
• Internal Resistance: 660 Ω
• Cartridge Mass: 6.3 g
• Cartridge Mass (inc. fixings): 7.6 g
• Fixing Centre: 0.5" (12.7 mm)
• Playing Weight: 1.5 - 2.0 g (1.7 g nom.)
• Replacement Stylus: 1006 - D0

Stylus for Goldring G1006 Cartridge

Just needle, not the complete cartridge included!

Black through-dyed and not printed paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 mm x 180 mm
• material: 80 g/m² black premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 50 pieces
• Made in Germany

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

The worlds smallest portable rechargeable subwoofer is getting an upgrade!

Everyone loves bass, we decided to take the Subwoofer to the next step, rather than the old 30 watts of power it now has 40 watts of power! This ultimatly gives you a cleaner low that matches the new Minirig 3!

• Dimensions W = 101.6mm H = 213mm
• Weight 875g
• Driver Custom 74mm with double neodymium motor system
• Frequency response 48-120Hz
• Battery life max volume 8 hours
• Battery life average use 30 hours
• Battery life low volume 80 hours
• Input power USB (5V DC @ 1500mA)
• Output power USB (5V DC @ 1500mA)
• Charging time 4-5 hours
• Audio input/output 2 x 3.5mm mini jack socket
• Construction Anodise aluminium and high impact ABS

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

PROS
•Modern turntable
•Bluetooth speaker connectivity
•Directly digitises vinyl to a storage medium
•Semi-automatic

PRODUCT INFORMATION
•The Lenco LBT-120BK Turntable is a semi-automatic record player with Bluetooth functionality. You can connect the record player to your Bluetooth speaker in seconds and enjoy a full and warm sound from the comfort of your couch. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your LP or single at the right speed.

•And what if you want to enjoy your favourite records while cycling or in the train? The Lenco LBT-120BK digitises all your favourite records via the built-in USB port. You can transfer the rec•ordings to a USB stick in next to no time and carry them with you in your pocket.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LBT-120BK turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tone arm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LBT-120BK is supplied with a dust cover that keeps your Lenco fresh and clean during brief periods when you are not using your turntable.

SPECIFICATIONS
•SKU: A002991
•Product height: 12.20 cm
•Product depth: 36.20 cm
•Product width: 42.20 cm
•Number of RCA outputs: 1
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902039822
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 12W

PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with black HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

The White Peach Records Logo 12" Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.

Pure white paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 mm x 180 mm
• material: 80 g/m² pure white premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 50 pieces

UDG developed a light EVA turntable hard case designed for life on the road. The UDG Turntable Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second-to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects turntable platter, faders and buttons of the turntable.

Weight 3,17 kg / 6.974 lbs
Outer Dimensions (W x H x D) 52.5 x 42.5 x 21.0 cm | 20.7 x 16.7 x 8.3 inch
Inner Dimensions (W x H x D) 47.5 x 37.0 x 18.0 cm | 18.7 x 14.6 x 7.1 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks
Extra's Includes adjustable foam pads to fit various turntables
Convenient carry handles
Convenient shoulder strap
Easy grip zipper puller
Fits - Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE
- Denon VL12 Prime, SC6000,
- Pioneer PLX-1000, PLX-500, CDJ-3000,
- Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver
- Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN
- Stanton STR8-150, ST-150, T.52, T.55 USB, T.62, T.92 USB
- Mixars STA, LTA
- Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII or similar size turntable

THE ULTIMATE PORTABLE TURNTABLE.
Reloop SPIN is a portable turntable that guarantees mobile fun anywhere you want! The turntable comes with everything you need out of the box and is especially optimized for scratching and cutting.

BLUETOOTH STREAMING
OF YOUR MUSIC
The Bluetooth Audio Streaming technology allows wireless streaming of music or beats via SPIN – this way the turntable becomes a speaker for your smartphone.

INCLUDING 7'' SCRATCH VINYL
SPIN comes with a 7'' slipmat and an exclusive 7“ scratch vinyl containing specially mastered scratch samples and beats for beginners and experienced scratch artists alike.

FLEXIBLE POWER OPTIONS
Enjoy your records on the road: SPIN is extremely portable, not only due to its shape and small form factor, but also thanks to its flexible power options. It can be used with a regular USB power supply unit (5 V, 2 A), USB power bank or rechargeable batteries*. The batteries can be inserted in the compartment on the bottom and are sold separately. A power LED keeps you informed about the turntable's operational status. The dust cover protects the turntable and thanks to the handle, SPIN can be carried like a suitcase. Skip-proof rubber feet guarantee stability.

*USB power supply, batteries or power bank are not included

OUTSTANDING FOR MOBILE SCRATCHING AND CUTTING
Via the switch on the turntable's top panel you can select between 3 speeds (33 1/3, 45 & 78 rpm) which covers all available speeds. The straight tone arm offers enhanced stability and can be fixed into position with a transportation lock. The pre-installed cartridge has excellent tracking features and holds the groove tightly, even when carrying out fast scratches.

45-MM CROSSFADER
PRE-INSTALLED
The precise 45-mm crossfader has a unique form factor and thanks to the two-rail technology it is especially sturdy. Moreover, it is possible to install the crossfader on either side of the platter – simply select your preferred position.

EXTENSIVE CONTROLS & ADJUSTMENT POSSIBILITIES
On the top panel you can find a start/stop button as well as a pitch control with a range of +/-20 % for precise setting. A tone control can be used to adapt the sound of the lows to your requirements. Volume for the AUX input and master/headphones output can be adjusted via two separate controls. There is also a 7'' adapter for records with a large centre hole.

EXCLUSIVE SUPER SPIN
DUCK LOOPER APP
With any purchased SPIN, DJ Babu and the Beat Junkies Institute of Sound adds a free copy of their Super SPIN Duck Looper app, which can be used ideally as a backing beat while scratching and cutting.

RELOOP SPIN -
CONNECT THROUGH VINYL.
Through the combination of turntable and mixer as well as the high connectivity, SPIN is ideal for vinyl lovers as well as scratch artists and aspiring DJs.

SPIN

Portable turntable for vinyl lovers & scratch artists
Bluetooth streaming, versatile connection possibilities and optional battery operation
Comes with 7'' scratch vinyl, 45-mm crossfader, cartridge and integrated speaker

FEATURES
Portable turntable for vinyl lovers & scratch artists
Mobile fun with your turntable, anywhere you go
Outstanding for mobile scratching and cutting
Out of the box: comes with 7'' scratch vinyl, pre-installed 45-mm-crossfader & cartridge, integrated speaker, Bluetooth audio receiver, USB recording function, slipmat, and dust cover
High-grade 7''-scratch-record: professionally recorded samples for scratching and beats for juggling
Bluetooth audio streaming: wireless streaming of music or beats to the device
Smart USB recording: direct recording of scratches & cuts to USB in MP3 format
Can also be used for digitizing vinyl
Integrated speaker on the turntable's left
3 selectable speeds (33 1/3, 45 & 78 rpm)
Extremely stable tone arm with transport lock
Cartridge with excellent tracking features
Precise 45-mm-crossfader with two-rail glide technology
Crossfader can be installed on preferred side (both-way)
Two headphones connections for listening and monitoring
AUX input facilitates connection of several turntables (daisy chain)
Easy battery charging via USB PSU or USB power bank (sold separately)
Installed start/stop button
Precise speed adjustment via pitch control with +/-20 %
Tone control to adjust low frequencies
Volume control for AUX input and master/headphones
Power LED indicates the turntable's operational status
7'' record puck adaptor with holder
Anti-skip rubber feet for secure stand
Especially sturdy and portable shape factor with optional battery operation
Additional protection thanks to dust cover; can be transported via carrying handle when closed
Locking of dust cover for safe transport
Can be operated with regular USB PSU (5 V, 2 A), USB power bank or batteries (sold separately)
Batteries can be inserted into battery compartment on the device's bottom 2x Li-Ion 18650 (sold separately)
Incl. 7'' scratch vinyl, pre-installed cartridge, slipmat, dust cover, puck adapter, instruction manual and Super Spin Duck Looper app

TECHNICAL DATA
Belt drive
Inputs: AUX 3.5 mm stereo, Bluetooth audio
Outputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereo
Recording format: MP3 with 256 kbit/s
Recording quality: 16 bit / 44.1 kHz
Battery type: 2x Li-Ion 18650 with 1860 mAh each (batteries sold separately)
Power supply: 5 V, 2 A micro USB (PSU sold separately)
Dimensions: 370 x 95 x 260 mm
Weight: 1.61 kg

manual: https://www.reloop.com/media/custom/upload/Reloop-spin_instruction_manual_20190604.pdf

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1210MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model. The SL-1200MK7 has also further unified the all black design scheme, even in every part, to become more stylish and attractive.

This record player with external speakers and its minimalistic design has a satisfying listening experience due to the aluminium platter, NP15 diamond needle and tone arm with adjustable counterweight. In combination with the Bluetooth function the T150 record player has everything you need.

• 2-speed record player
• Plays 7”, 10” or 12” records
• 2 external speakers - 4”, 4Ω, 15W
• NP15 diamond needle
• Belt-driven
• Pitch Control
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC power adapter
• Aluminium tonearm with adjustable counterweight
• Full-size aluminium platter
• Dimensions: 40.5 cm (l), 31.5 cm (w), 5.5 cm (h)
• Speakers: 13 cm (l) 15 cm (w) 20 cm (h)
• Weight: 3.3 kg

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

SPECIAL FEATURES
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT-95E)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 2.0g +/–0.5g
• Cartridge Weight 5.7g +/–0.5g
• Head-shell Weight 11g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 355x 121mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/202/TD202-User-Guide.pdf

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

AFI flat.2 Record Flattener / Relaxer
The Audio Fidelity Improvement flat.2 is a cutting-edge multifunctional record flattener and relaxer. It flattens vinyl LPs, Maxis and Singles. Using special flat mats and high-quality control electronics the flat.2 achieves an utterly even distribution of heat and therefore results that have been out of reach until now.

Preset programs provide for very simple handling. The Standard program reliably eliminates most of the warps. In addition to that, there is an Expert program with flexible settings.

The flat.2 works very precisely and has several protective mechanisms to ensure very high product and process safety. Allocation of temperature on the surface as well as at the top and bottom is homogenous. Deviation of the target value represents less than 0,25 K.

Another distinctive feature of the flat.2 is the Relaxation program. The vinyl record is heated (and afterwards cooled) very slowly, evenly and controlled to temper the record. This thermal process of tempering is a traditional physical method and causes a considerable sound improvement in most cases.

A slim construction and first-class manufacturing out of special hard glass emphasize the elegant and timeless design.

Characteristics

• special flat mats for even distribution of temperature on every spot of the vinyl record
• homogenous heating surfaces in the interior of the machine
• smart and separate control of top and bottom side
• high-quality magnetic switches for safe contact and longevity
• simple handling of standard programs
• special program of thermal relaxation / tempering for sound improvement
• high process safety due to error detection and temperature restriction mechanisms
• easy-care high-class surfaces made of hard glass
• made in Germany

Technical Specifications

• power input: max. 90 VA
• maximum temperature: 59° C (Standard program), 54-60° C (Expert program)
• deviation of target temperature: less than 0,25 K
• size: 400 x 55 x 500 mm
• weight: 8,7 kg

Review: http://www.afi-record-flattener.com/download/AFI_record_flattener_review_image-hifi_2018.pdf

Stylus for Goldring E1 MM Cartridge

A Digital DJ looking for a professional, durable case solution for your Pioneer XDJ-700 / Numark PT01 Scratch Turntable USB? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer XDJ-700 / Numark PT01 Scratch Turntable USB, these cases are perfect for the travelling DJ that needs to protect their equipment.

EAN 8718969211192
Color Black
Weight 1,72 kg / 3.784 lbs
Outer Dimensions (W x H x D) 33 x 32 x 14 cm | 13 x 12.6 x 5.5 inch
Inner Dimensions (W x H x D) 32 x 31.5 x 13 cm | 12.6 x 12.4 x 5.1 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Protective egg-crate foam prevent damage from vibrations and shocks
Extra's Removable divider for cable and power adapter storage
Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Pioneer XDJ-700
Numark PT01 Scratch Turntable USB

The new MAGMA 45 RECORD-BAG 50 holds up to 50 x 7-inch records and is perfect for shorter DJ-sets or record digging. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records.

FITS:
• 50 x 7” Vinyl-Singles
• 45 Adapters

BASICS:

• Constructed of water-resistant 1680D Polyester
• 1 thick cm EVA padding and integrated PVC walls for ultimate protection
• Strong zipper
• Internal mesh pocket for 45 adapter storage
• Convenient carrying-handle and ergonomic shoulder-strap
• Fits inside most backpacks

SPECS:

• Outer measures: 21 x 21 x 12,5 cm
• Inner measures: 18,5 x 18,5 x 11 cm
• Weight: 0,7 kg

45 Adapter not included.

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet

AT-VMN95ML
VM95 SERIES MICROLINEAR REPLACEMENT STYLUS
Aluminium cantilever
Microlinear Stylus
Nude Square Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

The Glorious Turntable Lowboard is a high-quality piece of furniture in a retro 1960’s design and is ideal for placement in your living room. With a dedicated surface for a turntable and plenty of space for your vinyl collection, the Turntable Lowboard is ideal as a listening station. The open record crate invites you to dig through your collection and allows direct access to up to 130 12''-records.

• High-quality turntable lowboard in 60s retro design for your living room
• Listening station: provides storage space for a turntabel and plenty of space for records
• Open record crate for diggin through you collection and access to up tp 130x 12"-records
• Front compartment with push mechanism for amplifiers, CDs or boocks
• Cavity on the rear panel hides unsightly wires
• Timeless design made of wood with white high-gloss finish
• Stable and elegant stand made of solid ash wood (white ash)
• Shock-absorbing rubber feet for damping vibrations

Material corpus: MDF wood with white high-gloss veneer
Material stand: Ash wood (white ash)
External dimensions corpus: 862 x 240 x 420 mm (L x H x W)
Overall height: 444 mm
Weight: 17 kg

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high

Dr. Suzuki, Stokyo and Turntable Training Wax give you a traditional style portable 7 inch slipmat with 2 slip sheets included!
Specially cut to fit the Solid Cutz Vestax, PT01 and stock platters.
*****
Dr. Suzuki introduces a new Kuttin' Donut 7" Scratch Performance slipmat, made for Turntable Training Wax!
By using his patent materials Dr. Suzuki is able to have the record sit as flat and thin as possible to the slipmat/platter.
If you experience any doming or warped records, the center label cut out on the slipmat allows the record to sit snug into the slipmat to lessen any wobble/warp issues!
The long-awaited 7 inch Slip Sheet from Dr. Suzuki has been downsized and made carefully with selected materials similar to the classic and popular 12 inch version. Place between the slip mat platter for smoother record control!

The excellent Dr. Suzuki Slipmats are now available in red!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Spare needle for the Cruiser Portable Turntable from Crosley.

Every once and a while you need to take care of your record player. This is the NP6 stylus replacement needle which is compatible for these record players:

• Cruiser Deluxe
• Voyager
• Lancaster

Crosley NP 6 Spare Needle - features:

• ABS Plastic Composition
• Stylus Needle
• plays 3 speeds - 33 1/3, 45 and 78 RPM records

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The UDG Creator Headphone Case is a large carrying bag for DJ headphones such as the Sennheiser HD 25-1.

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!