DJ Equipment 984 Items

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

For TN-200 Turntable

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

With this cleaning liquid specially adapted to the FLUX-Sonic, you always get the best result!

Weight: 61 g
Size: 3,6 x 2 x 9,2 cm

Presenting the new CTRL CASE EP-133 K.O. II – the ideal safeguard for beat makers and producers on the move. Specifically crafted to hold the new Teenage Engineering EP-1330 K.O. II, this compact and lightweight case ensures your sampler is transported safely to your upcoming studio sessions. With a durable Durashock molded EVA shell and high-density foam interior, it also boasts a mesh pocket for tidy storage of audio cables, spare batteries and more.

FITS
Teenage Engineering EP-1330 K.O. II

BASICS
Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Including mesh pocket for cable storage
Incl. removable egg-foam padding to protect knobs, faders and pads
Compatible with Decksaver® cover

SPECS
Outer measures: 29 x 23 x 6 cm
Inner measures: 25 x 18,5 x 3,5 cm
Weight: 0,3 kg


Color: black

As consequent advancement of the popular RH-2400 series, the successor offers an even more precise bass sound thanks to the completely closed construction. Despite powerful kicks the sound characteristics remain transparent: Brilliant mids and highs and high output make monitoring and mixing easy. Improved wearing comfort could be realized due to reduced weight and a new headband construction. The bordered Reloop sign on the ear cups top off the new RH-2500's appearance.

FEATURES
•Professional DJ headphones with swivel/fold-in construction
•Closed construction
•One-sided cord routing (oxygen-free copper strand)
•Excellent sound characteristics due to cobalt saggar with broad efficiency factor
•Outstanding manufacturing with extra fortified bracket construction
•High output capacity
•Precise reproduction of bass, treble and high frequencies
•Excellent wearing comfort thanks to further reduced weight
•Bordered Reloop sign on ear cups

TECHNICAL DATA
•Driver: 2x 40 mm
•Frequency Range: 20 Hz ? 20 kHz
•Sensitivity: 118 dB
•Impedance: 32 ohms
•Connector: 3.5 mm stereo jack
•Adaptor: 6.3 mm stereo jack
•Cord: 1.05 m +/-10%
•Weight: appr. 307 g

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Glow N Dark version of our world famous 45A seven inch vinyl record adapter.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

Great for DJ's spinning in clubs or the perfect night light for vinyl fiends.

Made in New York City at the Wax Rax lab.

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

A Producer looking for a professional, durable case solution for the Antelope Zen Q-SC/ Go-SC? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Antelope Zen Q-SC/ Go-SC, this case is perfect for the travelling Producer that needs to protect their equipment.

Specifications:
Weight: 0,40 kg / 0.88 lbs
Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3.0 inch
Inner Dimensions (W x H x D): 20.3 x 18.3 x 6.6 cm | 7.9 x 7.2 x 2.6 inch
Material: Durashock molded EVA foam

Protection:
Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam

Extra's:
Removable divider for extra cables or power adapter
Heavy duty handle
Easy grip zipper pulls

Fits:
Antelope Zen Q or Go Synergy Core, power adapter, extra cables

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Circuit Tracks/Rhythm? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Circuit Tracks/Rhythm, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Circuit Tracks/ Rhythm
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
29,50cm

HEIGHT
25,00cm

DEPTH
7,00cm

WEIGHT
0,99kg

The new MAGMA 45 RECORD-BAG 50 holds up to 50 x 7-inch records and is perfect for shorter DJ-sets or record digging. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records.

FITS:
• 50 x 7” Vinyl-Singles
• 45 Adapters

BASICS:

• Constructed of water-resistant 1680D Polyester
• 1 thick cm EVA padding and integrated PVC walls for ultimate protection
• Strong zipper
• Internal mesh pocket for 45 adapter storage
• Convenient carrying-handle and ergonomic shoulder-strap
• Fits inside most backpacks

SPECS:

• Outer measures: 21 x 21 x 12,5 cm
• Inner measures: 18,5 x 18,5 x 11 cm
• Weight: 0,7 kg

45 Adapter not included.

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

760 g layer weight to stabilize vinyl records.
Ø 70mm

A Digital DJ/ Producer looking for a professional, durable case solution for your NI Traktor X1 MK3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor X1 MK3, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Black soft fleece interior
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• NI Traktor X1 MK3

Specifications:
• Weight: 0,43 kg / 0.946 lbs
• Outer Dimensions (W x H x D): 33.8 x 14.4 x 6.8 cm | 13.3 x 5.7 x 2.7 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam

The UDG Ultimate Laptop Stand is a portable compact laptop or desk stand with rugged, reliable and ergonomic design for universal use. It is perfect for supporting DJ equipment like laptop, controller, mixer etc. It could be disassembled easily and
is constructed from solid steel with a scratch resistant powder coating and features no-slip support arms.

This table desk stand has 4 line-it-up bars and 2 support bars for with solid adjustable 4 height alignment, comfort, and convenience. Set it low for a minimal clearance of 6.75” or set it up to 11.5” high. The 10.75” long support arms hold gear with a width of 9” or greater and, by adding the included extensions, it can be extended to fit that extra wide 17" laptop or other gear.

The laptop stand design leaves your laptop or other device well ventilated and reduces the risk of overheating.

FEATURES:

• Adjustable height / width
• Fits laptops 13-17 inches, iPads and Controller
• Solid and easy to assemble laptop/controller stand for DJs/Producers
• Safe & reliable device placement
• Rugged, durable metal construction, anti-scratch resistant powder coating
• Stable & ergonomic tabletop design

Dimensions:
28 x 26 x 35 cm (Breite x Höhe x Tiefe)
11 x 10,2 x 13,7 inch (Width x Height x Depth)

Weight:
1,4 kg
3 lbs

A Digital DJ looking for a professional, durable case solution for your Pioneer RMX1000 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer RMX-1000 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,45 kg / 0.99 lbs
• EAN: 8717228278310
• Outer Dimensions (W x H x D): cm: 37 x 19 x 7 | inch: 14.5 x 7.5 x 2.8
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper puller
• Convenient carry handles

Fits:
• Pioneer RMX-1000 Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Launchpad X? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad X, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Launchpad X
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

WIDTH
30,20cm

HEIGHT
30,20cm

DEPTH
4,00cm

WEIGHT
0,99kg

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. The HHV x UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the HHV x UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The HHV x UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This HHV x UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition) - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

The new Magma CTRL-Case Push2 is specially designed to protect the new Ableton Push 2 unit. Crafted from durable and lightweight Durashock molded EVA foam and a water- rejecting polyester exterior, it is furthermore equipped with an adjustable (velcro) foam-kit that provides extra protection for all encoders, knobs and buttons.

FITS:

• Ableton Push 2
• Ableton Push

BASICS:

• Lightweight Durashock molded 5 mm EVA foam and polyester exterior shell
• Incl. high density egg foam to protect control knobs, faders and jog wheels
• Sturdy zipper and comfortable carrying handles
• Hand-luggage compatible
• Fits inside the MAGMA Rolltop III Backpack

SPECS:

• Outer measures: 40,5 x 33,5 x 7 cm
• Inner measures: 38,5 x 32 x 5 cm
• Weight: 0,9 kg
• Color: black/black (Item-No.: 47991 / EAN-Code: 4041212479914)

Technical data
Frequency range
20-25.000 Hz
Frequency response
20-25.000 Hz
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges OM 5E, OMP 5E, OMB 5E, OMT 5E

•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

Go retro with our EQ-001 wireless headphones!

Get the complete retro look by pairing your WE-001 cassette player with the EQ-001 wireless headphones from We Are Rewind! Bringing 12 hours of wireless audi, and integrated microphone and 3 different preset equalizer modes, they work just as fine with your smartphone.

Interchangeable ear cushions
Find the style that suits you best, thanks to 3 interchangeable ear cushions (orange, yellow and black), and let the nostalgia flow.

Listen for hours
Lightweight and comfortable thanks to its adjustable headband, the EQ-001 has a 12-hour Bluetooth battery life. So you can listen to your favorite mixtapes without strain.

Built-in equalizer
As for sound, you can personalize your listening experience by choosing from 3 different equalizer modes: "Signature", "Balanced" and "Bass Boost".

"GO" button
Compatible with our WE-001 cassette players, you can also use these headphones with your smartphone. Listen to your music, pause it, answer a call, hang up... all with a simple click on the "GO" button.

Integrated microphone
Last but not least: a double-click microphone and an integrated digital MEMS microphone make it easy to activate and deactivate Siri, Google Assistant and other voice assistants.

Weight: 0.404 kg

What's in the box:
• EQ-001 wireless headphones
• micro USB charging cable
• interchangeable ear pads (orange, yellow and black)
• two-year WE ARE REWIND warranty

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

A Digital DJ looking for a professional, durable case solution for your Korg Electribe/ Electribe Sampler? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Electribe/ Electribe Sampler, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969210065
• Outer Dimensions (W x H x D): cm: 39.3 x 24.3 x 5.5 | inch: 15.5 x 9.6 x 2.2
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Korg Electribe, Electribe Sampler

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

The UDG courier-style Record Bag is made to hold approximately 40 vinyl records - the perfect item for DJs who care about their weight. There's an additional compartment at the front flap for documents, tickets and stuff, as well as a small zip pocket at the rear.

UDG Record Bag Courier Style - additional features/details:

• holds up to 40 records
• electroplated zippers
• detachable shoulder strap with padding
• detachable phone pocket
• 5 compartments
• dimensions (exterior): approx. 38 x 28 x 13 cm
• weight: approx. 0.55 kg
• water resistant fabric made of 100% nylon

Stylus for Goldring E1 MM Cartridge

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

plastic vacuum tube 10 inch

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

The CTRL CASE MASCHINE is specially designed to hold the new NI Maschine+, Jam or MK2. Crafted from durable and lightweight Durashock molded EVA foam and a water-rejecting polyester exterior, it is furthermore equipped with a removable (velcro) foam that provides extra protection for all encoders, knobs and buttons.

FITS:

• NI Maschine Jam
• NI Maschine+
• NI Maschine MK2
• NI Maschine

BASICS:

• Lightweight Durashock molded 5 mm EVA foam and polyester exterior shell
• Incl. high density egg foam to protect control knobs, faders and jog wheels
• Sturdy zipper and carrying handle
• Fits including Decksaver® cover
• Compact size fits in any MAGMA bag

SPECS:

• Outer measures: 37 x 34,5 x 8 cm
• Inner measures: 33,5 x 31 x 4 cm
• Weight: 0,7 kg
• Color: black/black (Item-No.: 48004 / EAN-Code: 4041212480040)

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessory Included: 6.3 mm (1/4") snap-on adapter

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Record Box stands for creative furniture that gives vinyl collectors the chance to create unique pieces of furniture for storing and presenting records. The Record Box roll container is a furniture piece that can be moved around the room.
The set consists of a 12-inch record box that stands on a rollboard. The box offers space for around 110 records. The storage box is connected to the rollboard by specially developed glue dots. The set can be used as side table, roll container, office container for folder storage, a coffee table or a mobile record shelf.
The set offers a price saving compared to buying the elements individually. It is ideal as a creative addition to individually built vinyl furniture from the Record Box system and is available in black and white.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x46cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

Record Box stands for creative furniture that gives vinyl collectors the chance to create unique pieces of furniture for storing and presenting records. The Record Box roll container is a furniture piece that can be moved around the room.
The set consists of a 12-inch record box that stands on a rollboard. The box offers space for around 110 records. The storage box is connected to the rollboard by specially developed glue dots. The set can be used as side table, roll container, office container for folder storage, a coffee table or a mobile record shelf.
The set offers a price saving compared to buying the elements individually. It is ideal as a creative addition to individually built vinyl furniture from the Record Box system and is available in black and white.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x46cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!