DJ Equipment 567 Items

A Producer looking for a professional, durable case solution for the Antelope Zen Q-SC/ Go-SC? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Antelope Zen Q-SC/ Go-SC, this case is perfect for the travelling Producer that needs to protect their equipment.

Specifications:
Weight: 0,40 kg / 0.88 lbs
Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3.0 inch
Inner Dimensions (W x H x D): 20.3 x 18.3 x 6.6 cm | 7.9 x 7.2 x 2.6 inch
Material: Durashock molded EVA foam

Protection:
Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam

Extra's:
Removable divider for extra cables or power adapter
Heavy duty handle
Easy grip zipper pulls

Fits:
Antelope Zen Q or Go Synergy Core, power adapter, extra cables

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES
• Fits: 1x Pioneer DDJ-1000
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: black
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

UDG Ultimate Flight Case Wolfmix W1 Black not only transport your Wolfmix W1 easily & securely, but also facilitates the Wolfmix W1 to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Wolfmix W1 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Wolfmix W1 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

Weight 4,15 kg / 9.13 lbs
Outer Dimensions (W x H x D) 31.7 x 22.6 x 13.4 cm | 12.5 x 8.9 x 5.3 inch
Inner Dimensions (W x H x D) 22.2 x 19.6 x 5.5 cm | 8.7 x 7.7 x 2.2 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corner
Extra's Convenient 80 mm space at rear for connections & PSU storage
Fits Wolfmix W1

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

PICK UP AND PLAY ON THE GO

Stylophone S1 Carry Case

EMBOSSED LOGO: Embossed logo on front
PERFECT FIT: Your Stylophone fits neatly and securely into the case.
PROTECTION: The Carry Case is made of EVA to protect your Stylophone
ZIP TAGS: with Stylophone logo
MESH: The Stylophone Carry Case has an internal black mesh which can store accessories

The Stylophone S1 fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S1 synthesizer

UDG Ultimate Flight Case Wolfmix W1 Black not only transport your Wolfmix W1 easily & securely, but also facilitates the Wolfmix W1 to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Wolfmix W1 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Wolfmix W1 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

Weight 4,15 kg / 9.13 lbs
Outer Dimensions (W x H x D) 31.7 x 22.6 x 13.4 cm | 12.5 x 8.9 x 5.3 inch
Inner Dimensions (W x H x D) 22.2 x 19.6 x 5.5 cm | 8.7 x 7.7 x 2.2 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corner
Extra's Convenient 80 mm space at rear for connections & PSU storage
Fits Wolfmix W1

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES:
• Fits: 2x Pioneer PLX-1000 / Technics SL1200 turntable and 1x Pioneer DJM-S7 Mixer + 1 x Laptop + Accessories
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Built-in corner wheels with high quality in-line skate bearings for convenient transport
• Adjustable laptop shelf
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

DIMENSIONS:
(Width x Height x Depth)

Outer: 134,5 x 51 x 23 cm
Inner turntable compartment: 45,4 x 38,7 x 7,6 cm
Inner mixer compartment: 47 x 27,7-39,5 x 7,6 cm

Weight: 25 kg | 55 lbs

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

The new CTRL Case DDJ-REV5 / DDJ-REV7 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 / DDJ-REV7 controller. Made of lightweight and rigid Durashock molded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

FITS:
• Pioneer DDJ-REV5
• Pioneer DDJ-REV7

BASICS:
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
• Comfortable, rivet reinforced carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:
• Outer measures: 83 x 46 x 14 cm
• Inner measures: 73 x 37 x 11 cm
• Weight: 3 kg

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 4,60 kg / 10.12 lbs
• EAN: 8717228279959
• Outer Dimensions (W x H x D): 92.2 x 49.2 x 16.0 cm | 36.3 x 19.4 x 6.3 inch
• Inner Dimensions (W x H x D): 91.0 x 48.0 x 8.5 cm | 35.9 x 18.9 x 3.3 inch
• Material: Durashock molded EVA foam

Protection:
• Water repellent laminated nylon exterior
• Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• Pioneer DDJ-REV7, XDJ-RX3, DDJ-RZ, DDJ-SZ2, DDJ-SZ

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

The R.A. The Rugged Man Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that bigs up the latest albums by R.A. The Rugged Man. Style meets function to the highest degree.

comfortable, solid, universal shoulder pad for
heavy bags and long journeys
a heavy velcro closure makes the pad attachable
to any of our bags with 50mm wide straps.

especially developed for our chateau vinyl record bag range

material: certified cordura nylon

handmade in germany

pictures: airbagcraftworks.com

if it"s time for a new protective cover for your chateau vinyl bag, you can order it here as a seperate item.
all djs know about the hard and sometimes rather shortlife of a record case...
the flight cover is the best way to expand the lifetime of your chateau vinyl or chateau vinyl solo bag.

we strongly recommend not to travel especially fly without it. at work the flight cover can stay on the lower part of the case and doesnt need to be taken off completely.

satisfaction is reported by our frequent flying customers.

material: waterproof cordura nylon, produced in germany.
colour: black

made in germany

pictures: airbagcraftworks.com

taunus 1.5 | com-fi pro | premium nylon night sky

largest and most comfortable version of
our puristic and lightweight backpack
for vinyllovers, travellers and minimalists.

_additional spacious pocket on the inner backside
_smaller inside zip pocket
_holds 16inch+ laptops or up to 40 x 12" records
_cushioned back
_extra double-layered breathable mesh cushioned back
_double-layered breathable cushioned shoulder straps
_4x unique adjustable buttons closure made from recycled
genuine leather
_hidden pocket-dock velcro patch for additional pouch options
_40mm wide straps with cushioning: 55mm

material: italian premium nylon with water-repellent coating
colour: black

h:46-49 x w:42 x d:11 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: red

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

With this cleaning liquid specially adapted to the FLUX-Sonic, you always get the best result!

Weight: 61 g
Size: 3,6 x 2 x 9,2 cm

Replacement filter for the FLUX-Turbo.
The replacement filter must be changed approx. every 2 to 3 months or after 20 aspirations to ensure a good suction result. Two filters are supplied in a double pack.
The inner filter material is selected to retain the coarse particles. At the same time, the suction power is not reduced too much by the pressure loss.
The FLUX-Filter is compatible with FLUX-Turbo and the FLUX-Turbo 2.0.

Weight: 3 g
Size: 3 x 3 x 3.5 cm

Replacement skids for the FLUX-Turbo.
After approximately one year of use, we recommend replacing the skids. In the set all 3 skids are included: 2 short ones for the sides an one long one for the suction channel.

Measures short:
Weight: 0.1 g
Size: 2 x 0.6 x 0.5 cm

Measures long:
Weight: 0.3 g
Size: 10.5 x 0.6 x 0.4 cm

taunus 1.2 | com fi | ballistic nylon black

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: certified cordura® ballistic nylon, water-repellent
colour: black
size: 48 x 38 x 8 cm

aw2019 / 2020 collections instruments

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

warp x airbag craftworks | 19.4

the 19.4 model is a wider version of warp x airbag craftworks 14.7 with additional capacity for up to 17" laptops.
ideally suited to djs or as an overnight bag perfect for travelling and everyday use.

_water-repellent ykk zippers with 2 sliders
_matt black coated metal carabiners & d-rings
_debossed leather warp logo patch with detailing in warp purple
_leather zipper tags in warp purple
_adjustable shoulder strap with leather shoulder pad
_shoulder pad leather debossed with a2 logo
& warp x airbag craftworks detail
_doubleface heavy duty leather handles with push button
_soft-cushioned back with pocket function
_leather feet/stands with circle debossing
_inside laptop holder space for up to 17" laptops

material: certified cordura® nylon
colour: black

made in germany

42 x 33 x 14 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Styli protection caps for VNL cartridges and styli

The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.

The protection caps come in pairs.

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome 3D design
The VNL 3D design is developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

The slipmat design uses several elements linked to the DJ culture:
• Scissors stand for "Cutting sounds"
• Equalizer levels picture refers to the mixers' levels
• Spiral symbolises turntable platter when spinning

The effect of animation is fully obtainable when the pitch is set to 33 +8.

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.
After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Enter the Exclusive world of Ortofon’s famous moving coil sound!
The Quintet Red is a perfect introduction to the world of Ortofon moving coils.
It features an Elliptical diamond which is cut and polished to Ortofon’s standards.

This entry-level MC cartridge has very high price-to-performance ratio and is a perfect all-rounder for the newcomers to the world of Moving Coil cartridges.

MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The ST-7 transformer is a perfect match for the MC Quintet Red cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.

MC Quintet Red Technical data:
• Output voltage at 1 kHz 5 cm/sec - 0.5 mV
• Channel balance - < 1.5 dB
• Channel separation at 1 kHz - > 21 dB
• Channel separation at 15 kHz - > 14 dB
• Frequency response 20-20.000 Hz - +/-2.5 dB
• Tracking ability at 315 Hz at recommended tracking force *) - 65 μm
• Compliance, dynamic, lateral - 15 μm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 μm
• Tracking force range - 2.1-2.5 g (21-25 mN)
• Tracking force recommended - 2.3 g (23 mN)
• Tracking angle - 20º
• Internal impedance, DC resistance - 7 Ohm
• Recommended load impedance - >20 Ohm
• Cartridge body material - ABS/Aluminium
• Coil wire material - Copper
• Cartridge colour - Red
• Cartridge weight - 9 g
*) Typical value

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for Quintet cartridge.

Ease of use
Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell.

The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 25 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H
*) Typical value

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Introducing the CTRL CASE DJM-V10/DJM-A9 - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit both, the latest Pioneer DJM-A9 and DJM-V10 club-mixer models, providing maximum protection with a Durashock molded EVA shell and fully padded interior. Plus, it features a convenient slot for storing audio cables and power adapters.

FITS:

• Pioneer DJM-A9
• Pioneer DJM-V10

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam plus fully padded interior
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 57 x 56 x 15 cm
• Inner measures DJM-V10: 46 x 44 x 7 cm / DJM-A9: 43 x 41 x 7 cm (Equipment slot)
• Weight: 2,3 kg

Introducing the CTRL CASE FOUR - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit the latest Rane Four DJ-controller, providing maximum protection with a Durashock molded EVA shell and fully padded interior.

FITS:

• Rane Four

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam and 4 EVA foam-corners
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 87 x 46 x 14 cm
• Inner measures: 78,5 x 39,5 x 11 cm
• Weight: 2,65 kg

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

Turn it up to 11 with the Montero Speaker! With 15 hours of uninterrupted play on a single charge of the built-in lithium battery, this small-but-mighty 20 watt powerhouse will rock your party from beginning to end. You don’t have to be tech savvy to enjoy this speaker, short press the power button once to turn on and short press twice to power off. The aux input enables you to hook up the Montero to your existing stereo setup, or you can transmit your digital tunes wirelessly using the built-in Bluetooth receiver. There’s also a built-in USB charger for those times when your phone battery is hovering way too close to 1%. Never again will a dead phone battery ruin your good time! Keep your party going all night with the stylish and powerful Montero Speaker.

Specifications:
• Built-in Bluetooth® Receiver
• 20 Watt Amplifier
• Built-in Lithium Battery
• Auxiliary Input
• USB Phone Charger
• Unplug Unit Before Powering Off
• Dimensions: 26 cm (w), 16,5 cm (h), 5,7 (d)
• Weight: 1,25 kg

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: black

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Standmount Speakers

• 25mm silk dome tweeter – for refined presentation
• 165mm treated paper cone – for a smooth & even frequency response
• Precisely optimised crossovers – for a neutral, phase linear, response
• CAD modelled rigid MDF cabinet – reduces standing waves, keeping internal vibration to a minimum
• Refreshed clean design – designed to complement today’s interiors

SX60. Sound Comes First
SX60 standmount speakers build on the strengths of SX50, taking on a larger form-factor for an assured musical performance. They can work happily in bigger spaces, while still offering you flexibility in terms of placement. Speaker stands or a cabinet top, it’s your call. SX60’s combination of engineering, confident sound reproduction, and price makes them a winning combination.

Rock Solid Foundations
Hi-fi speaker engineering starts with the cabinet. Computer-aided design (CAD) was used extensively to refine SX60’s internal structures, to ensure that while the drivers are vibrating with your music, the cabinet isn’t. This means that every millimetre of movement from the drivers is directed where it should be – at you.

Stand and Deliver
SX60 speakers have a 165mm (6.5") woofer made from treated paper. Hi-fi manufacturers have used it for years, as paper’s impressive strength-to-weight ratio is matched by excellent tonality – so instruments sound rich, well defined, and real. 25mm (1") soft dome tweeters, made from treated silk, take care of the higher frequencies – with the same balance of realism and refinement.

Two Drivers, One Voice
Our team in London took great care and attention when designing the crossovers in SX60 – as they’re responsible for ensuring that each driver receives the correct frequency. Accuracy of timing and stereo imaging depend on phase remaining completely linear, from top to bottom. The result? Your music sounds engaging, energetic and real.

Engineered, Front to Back
Attention to detail on SX60 runs from front to back. There’s a neat bass reflex port, directly under the woofer, which emphasises lower frequencies to provide rich engaging sound. Spin SX60 around to reveal a pair of high-quality speaker binding posts (connectors), which can accept thick speaker cable – with or without banana plugs.

Designed for Real Life
New look SX60’s clean, understated design allows them to sit in a variety of spaces, and work well in all. Leave the grilles on to protect the drivers from little fingers, or to gain acceptance from your interior designer – alternatively take them off to celebrate your great taste in music (and speakers).

Technical specifications:
• SENSITIVITY: 89dB
• FREQUENCY RESPONSE: 41Hz - 22 kHz
• IMPEDANCE: 8 Ohms
• RECOMMENDED AMPLIFIER POWER: 20-100 watts
• DRIVERS: Tweeter: 1 x 25mm (1") silk dome tweeterMid/Bass: 1 x 165mm (6.5") doped paper cone
• CROSSOVER: 2 way
• PORTED: 1 front
• COLOUR: Black Matte
• DIMENSIONS (HXWXD): 340 x 200 x 272mm (13.3 x 7.9 x 10.7")
• WEIGHT: 5.0kg (11lbs)

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Denon DJ SC LIVE 2, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Denon DJ SC LIVE 2

Specifications:
• Weight: 3,50 kg / 7.7 lbs
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 66.1 x 39.9 x 11.2 cm | 26.0 x 15.7 x 4.4 inch
• Material: Durashock molded EVA foam

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

OFFICIAL BOWIE STYLOPHONE CARRY CASE

Bowie Stylophone Logo on the front

SPECIAL SECURE FIT DESIGN

Special secure-fit design – Made from stress-resistant EVA Internal mesh pocket for accessories

BOWIE ZIPPER TAG

Embossed Bowie logo and Stylophone logo zip tags

The Stylophone S-1 Bowie fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S-1 Bowie synthesizer

Modular DJ headphones.

Features:
• Balanced sound
• High isolation PU leather earpads
• Clear sound at high volume levels
• High sound isolation on-ear cushions
• Weighing only 168g
• Modular headphone design

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DJM-A9 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DJM-A9 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Removable cable & PSU storage cover panel

Fits:
• 1x Pioneer DJM-A9

Specifications:
• Weight: 7,90 kg / 17.38 lbs
• Outer Dimensions (W x H x D): 56.1 x 45.9 x 21.6 cm | 22.1 x 18.1 x 8.5 inch
• Inner Dimensions (W x H x D): 42.3 x 40.9 x 15.6 cm | 16.6 x 16.1 x 6.1 inch
• Material: Heavy duty construction of 9 mm thick plywood

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• 1 x Rane Four + 1 x Laptop + Accessories

Specifications:
• Weight: 16,00 kg / 35.2 lbs
• Outer Dimensions (W x H x D): 89.0 x 53.1 x 23.3 cm | 35.0 x 20.9 x 9.2 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 9.0 cm | 30.8 x 15.4 x 3.5 inch
• Material: Heavy duty construction of 9 mm thick plywood

A Digital DJ looking for a professional, durable case solution for your Rane Four? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Rane Four, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Rane Four Controller

Specifications:
• Weight: 3,30 kg / 7.26 lbs
• Outer Dimensions (W x H x D): 83.8 x 45.9 x 12.4 cm | 32.9 x 18.1 x 4.9 inch
• Inner Dimensions (W x H x D): 78.8 x 41.0 x 10.7 cm | 31.0 x 16.1 x 4.2 inch
• Material: Durashock molded EVA foam

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/ hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Wheels) also features roller wheels with high quality in-line skate bearings for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• Rane Four Controller

Specifications:
• Weight: 14,50 kg / 31.9 lbs
• Outer Dimensions (W x H x D): 85.4 x 53.1 x 21.3 cm | 33.6 x 20.9 x 8.4 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 8.4 cm | 30.8 x 15.4 x 3.3 inch
• Material: Heavy duty construction of 9 mm thick plywood