DJ Equipment 958 Items

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo
_made from durable, lightweight & waterproof fabric

material: cordura® nylon & genuine leather details
colour: black

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

minimalistic, cubistic everyday bag.
designed by the a2 department in cooperation with playhouse records.
made from water-repellent cotton with finest italian leather details.
holds all necessities for a modern but craftmenship conscious everyday life.

_small outside pouch on the backside
_2 inside pouches, one with small ykk zipper
_adjustable shoulder strap with embossed leather cushioning &
stiffened bottom
_space for up to 50x 12" vinyls
_bag body and top not cushioned, just lined

material: water-repellent cotton & premium leather
colour: black

made in germany

33 x 33 x 15 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

16oz - glazed bottom

16oz - glazed bottom

16oz - glazed bottom

Made from 21 oz FattEz™, the HHV Logo Slipmats are perfect for precise DJing activities. This 12" slipmat is made from the highest quality poly felt material that's very similar to the thick felt of old school Technic slipmats. The HHV Logo Slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface. Perfect for the mix/club DJ as well as turntable and audiofile enthusiasts.

• Weight: 21 oz;
• thickness: 0.125 inch.
• 100% polyester felt.
• Made in USA

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Dr. Suzuki, Stokyo and Turntable Training Wax give you a traditional style portable 7 inch slipmat with 2 slip sheets included!
Specially cut to fit the Solid Cutz Vestax, PT01 and stock platters.
*****
Dr. Suzuki introduces a new Kuttin' Donut 7" Scratch Performance slipmat, made for Turntable Training Wax!
By using his patent materials Dr. Suzuki is able to have the record sit as flat and thin as possible to the slipmat/platter.
If you experience any doming or warped records, the center label cut out on the slipmat allows the record to sit snug into the slipmat to lessen any wobble/warp issues!
The long-awaited 7 inch Slip Sheet from Dr. Suzuki has been downsized and made carefully with selected materials similar to the classic and popular 12 inch version. Place between the slip mat platter for smoother record control!

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

Practical care set for basic cleaning. Lasting antistatic effect with Disco-antistat mixture, a special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Made in Germany!

Replacement case for our Disco Antistat record cleaning machine Generation II, with two brushes, without drying stand.

Made in Germany!

LP RACK

Holds up to 40 LPs

Measurements: 32 x 29 x 18 cm
Weight: 660g

A beautiful revisitation of a classic 70’s vintage design. A quick and inexpensive solution to store your valued vinyl.

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

• incl. Brush
• incl. Flight Case

Video: https://youtu.be/WZnFkEwAnCo

supplied in Flight case

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

Video: https://youtu.be/WZnFkEwAnCo

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

supplied in Flight case

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

supplied in Flight case

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

Digital start stop button for your portable turntable!

A highly efficient start stop button kit by Jesse Dean, that only draws less than 1mA...

• No need for latching relays
• No soldering
• No noise
• Powered from the turntable motor
• PT01 series and Handytrax ready

The kit includes:

• Digital JDD start/stop controller board
• 16mm aluminum momentary button
• 400mm button wire
• x2 wire crimps

Installation video:
https://youtu.be/wIAFvCDCh-o

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

ROLLTOP BACKPACK III

The Rolltop Backpack III is an extremely rugged, entirely weather-proof and multi-functional backpack that is suitable for a wide variety applications. From carrying your DJ- equipment, to convenient carry-on luggage, or just as a regular daypack, the Rolltop Backpack III does it all well. Its bicycle messenger inspired design features a variable “rolltop” opening that gives you an extra 24 cm when unfolded to fit oversized gear like the Pioneer DDJ-SX2/DDJ-RX, the Numark NS-6, 2-octave keyboard controllers, or even multi-effect pedals.

FITS
Pioneer DDJ-SX2
Pioneer DDJ-RX
Pioneer DDJ-SR
Pioneer DDJ-RR
Pioneer DDJ-S1/T1
Pioneer DDJ-Ergo
Pioneer XDJ-R1
Pioneer XDJ-Aero
Roland DJ-808
Denon MC-7000
NI Kontrol S8
NI KOntrol S4
NI Kontrol S5
Numark NS6
Numark 4Track
Numark N4
Numark Mixdeck Quad
Numark MIxtrack Pro III
Numark IDJPro
Reloop Mixon4
Reloop Terminal Mix 8

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Especially designed to carry the MAGMA CTRL CASE series
Flexible height adjustment through variable Rolltop Closure
Zippered side access laptop compartment with waterproof zippers
Two accessory pockets with waterproof zippers
Ergonomic padded back panels, s-curved backpack straps, chest strap and hip belt
Hand-luggage compatible (up to 56 cm height)

SPECS
+ Outer dimensions: 53-75 x 33 x 20 cm
+ Inner dimensions: 51-70 x 32 x 19 cm
+ Weight: 1,7 kg

THE NEW JESSE DEAN DESIGNS JDDPTA

PORTABLE TURNTABLE TONE ARM KIT.



WITH THESE FEATURES:

• 3K CARBON FIBER TUBE AND HEAD SHELL
• BILLET ALUMINUM GIMBAL WITH BALLBEARINGS
• CUSTOM ENGINEERED LIMITED BOUNCE TENSION SYSTEM
• PHONO PRE-AMP INCLUDED
• EASY WIRE INSTALLATION KIT
• Made in SoCal, USA
CAPATABILITY:

NUMARK PT-01
NUMARK PT-01USB
NUMARK PT-01SCRATCH
VESTAX HANDYTRAX
VESTAX HANDYTRAX-USB

Weight 10 oz
Dimensions 10 x 3 x 2 in

Installation Guide:
[youtube https://www.youtube.com/watch?v=kKWMM6O2rRA?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

[youtube https://www.youtube.com/watch?v=bidUVnQ_49k?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE OR OTHER TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

45 RECORD-BAG „DUSTY DONUTS“ EDITION

Specially dedicated to all 45 enthusiasts and vinyl pros, the new MAGMA 45 RECORD-BAG 150 offers an extremely compact and stylish way to travel with up to 150 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. The main compartment is divided into two equal sections, so records can be organized front-to-back or side-to-side.

FITS
150 x 7-inch records
Headphones
Needle-case
Adapters
Slipmats

BASICS
Constructed of water-resistant 1680D Ballistic-Nylon
1 cm EVA padding and integrated PVC walls for ultimate protection
Protective rubber corners
Internal size and divider allows two different storage ways
Two outer accessory pockets for Headphones, needle-case and adapters
Separate mesh pocket for slipmat storage
Convenient carrying-handle and ergonomic shoulder-strap
Trolley-Sling
Strictly limited edition of only 150 pieces worldwide

SPECS
Outer measures: 21 x 39 x 25 cm
Inner measures: 18,8 x 38 x 20 cm
Weight: 1,56 kg

The RIOT DJ-Stashpack XL Plus is a versatile and lightweight gig bag that and was designed to be flexible in order to accommodate a variety of equipment. It features a practical, height-adjustable Rolltop opening to easily stash a battle-mixer, records, production gear or a DJ-controller. With its durable material, solid processing and a unique design, the new RIOT DJ-Stashpack XL Plus is perhaps the most versatile gear bag in the market.

FITS
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DJS-1000
Numark NS6II
Numark NV2
Numark Mixtrack Pro 3
NI Kontrol S5
NI Kontrol S4
NI Kontrol S2
Reloop Terminal Mix 4
Roland DJ-202
Pioneer DDJ-SB2
Pioneer DDJ-RB
Numark Mixtrack Pro 2
Denon MC-4000
Vestax VCI-400
Vestax VCI-380
Akai MPK-25
Akai MPC Renaissance
Rane Seventy-Two
Rane Sixty-Two
Rane Sixty-Eigth
Pioneer DJM-S9
Pioneer DJM-900 SRT/NXT
NI Kontrol Z2
Laptop up to 17’
12“ Vinyl
Accessories

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
Soft-fleece lining
PVC-coated (waterproof zippers)
Lockable zippers on main and laptop compartment
Flexible height adjustment through variable Rolltop Closure
Main compartment includes removable bottom foam and padded side walls
The included (removable) Protection Panel protects jog wheels and faders and the folding top part works like an additional lid when e.g. battle-mixers are stowed.
Separate side entry compartment provides quick access to your laptop (up to 17’’)
Large front pocket with internal zip-pouches and organizers
1 side quick-access side pocket for small accessories and personal belongings
1 side bottle holder
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand-luggage compatible (up to 56 cm height)
Zippered side access laptop compartment with waterproof zippers (up to 17’’

Outer dimensions: (H/B/T): 49-65 x 38 x 26 cm
+ Inner dimensions: : 47-56 x 32 x 20 cm
+ Weight: 2,4 kg

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

The RIOT DJ-BACKPACK is the latest and most compact model of the RIOT line. It was especially designed for digital-DJs travelling with a basic DVS setup such as 15” laptop, Timecode records and accessories or small controllers.
The clever interior layout of the main compartment includes two padded, removable dividers which allowing for three separate protective compartments and the featured “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.

FITS
13-15‘‘ Laptop
NI Maschine
NI Kontrol X1
NI Kontrol F1
NI Kontrol D2
Ableton Push 2
12“ Vinyl
Accessories

BASICS
Crafted from durable and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Soft-fleece lining
Lockable zippers on main and laptop compartment
Rubber corner protectors and rubber feet
Main compartment includes two padded, removable dividers
The “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.
Separate side entry compartment provides quick access to your 15,4’’ laptop
Two internal hanging mesh accessory pockets comfortably fill out the upper area of the backpack
Large front pocket with internal pouches and organizers
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand luggage compatible

SPECS
+ Outer dimensions: (H/B/T): 53 x 33 x 16-22 cm
+ Inner dimensions: : 40 x 31 x 12-16 cm
+ Weight: 2,2 kg

With a capacity of up to 50 records, the new RIOT LP- Bag 50 is a stylish solution to carry your 12-inch vinyl in comfort and style. Equipped with the same high quality material components the entire RIOT range uses, this bag also matches the new RIOT LP-TROLLEY 50 perfectly and can be easily affixed on to a trolley handle with its trolley sling.

FITS
50 12“ Vinyl
20 7“ Vinyl
13‘‘ MacBook
NI Maschine
NI Kontrol X1/F1/Z1 (inkl. Case)

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
1 cm padding on all sides
PVC-coated (waterproof zippers)
Riveted handles and straps
Soft-fleece lining
Lockable zippers on main compartment
Rubber corner protectors
Ergonomically shaped, adjustable shoulder strap and padded carrying handles
Including trolley-sling to attach on a MAGMA record or equipment trolley
Hand luggage compatible

SPECS
Outer dimensions: 33 x 35 x 20 cm
Inner dimensions: 31 x 32,5 x 16 cm
Weight: 3,7 kg

The model Wall of the new Zomo VS Rack-series by Zomo is a new and groundbreaking option for vinyl storage. The robust yet lightweight construction made from powder-coated metal combines longevity and elegant design.
The product is designed for wall-mount but it can also be detached from the wall-fitting for transport.

Specifications

Measurements: 256 x 120 x 340 mm
Weight: 0,5 Kg
Capacity: 20-30 LPs

The model Wall of the new Zomo VS Rack-series by Zomo is a new and groundbreaking option for vinyl storage. The robust yet lightweight construction made from powder-coated metal combines longevity and elegant design.
The product is designed for wall-mount but it can also be detached from the wall-fitting for transport.

Specifications

Measurements: 256 x 120 x 340 mm
Weight: 0,5 Kg
Capacity: 20-30 LPs

The Zomo VS-Box Space is a modern storage solution for LPs. It convinces with its exceptional design and high quality. The surface is laminated with robust and water-repellent decor and available in the colours black, white, Zebrano and walnut. This piece of furniture is a definite eye-catcher in your living room.

Features

Capacity: 100-120 LPs
Exclusive design
Premium quality
Specifications

Dimensions: 460x400x370 mm
Weight: 3,7 kg

The VS-Box 1/45 is a vinyl storage box which can be attached to the wall for your convenience. It can be fastened very easily and ensures your favourite records are always at hand. It can be combined with other boxes of the same kind for efficient storage layout. The puristic design fits in every living room and ensures that the furniture is both practical and decorative.

Features

Capacity: 40-50 LPs
Designed for mounting on the wall
Material: medium density fibreboard with laminated decor
Ageless design
High-grade workmanship
Technical Data

Dimensions: 360x170x190 mm
Weight: 2,7 kg

The tiny rack holds 12 MCs (upright).

width 250 mm
depth: 70 mm
height: 110 mm

color: black
material: plastic

EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DON’T

Adjustable cartridge which will fit in a traditional headshell mount. Replaceable diamond tip.

• 5" mount+W36
• 0,6mil spherical diamond tip
• tracking force: 2,5g to 3,5g
• ch.separation: 26dB @ 1KHz
• output: 2,4 mV