DJ Equipment 264 Items

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum - features/specifications:

• color: white
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g

The tightly woven velvet on the brush surface is ideal for cleaning the sound grooves of the record and also enhances the cleaning effect. Fine dust adhering to the record is removed. In addition to the CL-120 velvet brush, a special brush is supplied to keep the cleaning surface of the brush clean.

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

The Reloop Fader Caps bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple fader caps are a great addition to your set-up. Supplied in packs of 5, they're also perfectly complemented by Reloop's new Knob Caps. Customise your gear and stand out from the crowd.

FEATURES
• 5 fader caps
• Rubber coating for tight grip
• Ergonomic fader cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with the most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 14 g (packaging unit)
• Dimensions: 15 x 8 x 3 mm

The Reloop Knobs bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple caps are a great addition to your set-up. Supplied in packs of 8, they're also perfectly complemented by Reloop's new Fader Caps. Customise your gear and stand out from the crowd.

FEATURES
• 8 knob caps
• Suitable for all potentiometers with d-shaft
• Rubber coating for tight grip
• Ergonomic knob cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 20 g (packaging unit)
• Dimensions: 7 x 12 x 7 mm

Made from 80 0,5l (16oz) recycled plastic bottles, the SOLID BLAZE PACK 80 is a lightweight daypack designed with a minimalistic footprint to accommodate your DJ/production essentials and daily needs.

The SOLID BLAZE PACK 80 is crafted from only the highest quality materials, such as a water-repellent RPET 900D shell and YKK® AquaGuard® zippers to protect your laptop, tablet, timecode records and other expensive gear from the elements. The interior layout features numerous compartments, pouches and zippered pockets for organization and quick access. Travel comfortably knowing your gear is safe inside the MAGMA SOLID BLAZE PACK 80.

FITS:

• Pioneer DDJ-XP2
• Akai MPC Live
• Akai MPC One
• Akai MPK Mini
• Ableton Push 2
• Roland SP-404
• Roland Boutique Series
• NI Maschine MK2
• NI Maschine+
• Rodecaster Pro
• 12" vinyl
• Laptops up to 17”
• Camera gear etc.

BASICS:

• Fabrics made from recycled PET plastic bottles (Global Recycling Standard certified)
• Outer material crafted from roadworthy and water-repellent RPET 900D Polyester (with eco-friendly water- based PU-coating)
• Lining made from RPET TC Polyester
• Lockable dual PVC-coated YKK® AquaGuard® zippers (padlock not included)
• Separate compartment incl. padded laptop (up to 17“) and tablet sleeve (This compartment also fits 12” records)
• Numerous internal pouches, compartments and zippered pockets to organize smaller gear
• Quick-access front-compartment
• Hanging mesh pocket for headphones or camera storage
• Expandable side-pocket for bottle storage
• Comfortable air channel back padding with hidden document pocket
• Contoured and ergonomic riveted shoulder-straps with metal buckles
• Adjustable chest-strap
• Trolley-Sling
• Cabin luggage compatible

SPECS:

• Outer dimensions: 49 x 32 x 20 cm / 19.25“ x 12.5“ x 7.8“
• Inner dimensions: 45 x 30 x 8 cm / 17.75“ x 11.75“ x 3.5“
• Weight: 1,3 kg / 2.8lb
• Color: black/grey (Item-No.: 47893 / EAN:4041212478931)

A true packing backpack designed to carry what you need.

Made from 120 recycled 0,5l (16oz) plastic bottles, the SOLID BLAZE PACK 120 is an all-purpose travel backpack with modular interior layout crafted for versatility. Whether you are hauling DJ or production gear, photo or video equipment, or other electronics, the SOLID BLAZE PACK 120 enables you to easily and conveniently organize your gear. The spacious and expandable main compartment features removable EVA padding and multiple dividers for ultimate packing experience. The customizable padded interior ensures your gear travels with you safely. Loads of additional compartments, pouches and zippered pockets offer intuitive accessory management and quick access to your belongings. The SOLID BLAZE PACK 120 is crafted from only the highest quality materials, such as its water-repellent RPET 900D shell and YKK® AquaGuard® zippers to protect your laptop, tablet, timecode records and other expensive gear from the elements. Travel comfortably knowing your gear is safe inside the MAGMA SOLID BLAZE PACK 120.

FITS:

• Pioneer DJM-S11
• Pioneer DJM-S9
• Pioneer DJM-S7
• Pioneer S-1000
• Pioneer Toraiz SP-16
• Rane Seventy-Two
• Rane Seventy
• Rane Sixty-Two
• Reloop Elite
• Akai MPC Live,
• Akai MPC Live 2
• Ableton Push 2
• Roland SP404
• NI Maschine MK2
• NI Maschine+
• Denon Prime Go
• 12” vinyl
• Rodecaster Pro
• Laptops up to 17”
• Camera gear etc.

BASICS:

• Fabrics made from recycled PET plastic bottles (Global Recycling Standard certified)
• Outer material crafted from robust and water-repellent RPET 900D Polyester (with eco-friendly water-based PU-coating)
• Lining made from RPET TC Polyester
• Lockable dual PVC-coated YKK® AquaGuard® zippers (padlock not included)
• Expendable equipment storage compartment with EVA side walls and bottom padding
• Includes removable dividers to customize individual sections
• Separate padded laptop and tablet compartment fits up to 17” laptops
• Numerous internal pouches, compartments and zippered pockets to organize smaller gear
• Quick-access front-compartment with internal pockets to organize smaller gear
• Dedicated headphone-pocket (also holds cameras)
• Side-pocket with pen and key-holder
• Side-pocket with USB charger port (power bank not included)
• Side-pocket for bottle or tripod storage
• Comfortable air channel back padding with hidden document pocket
• Carrying-handle with magnetic closure
• Contoured and ergonomic riveted shoulder-strap with metal buckles
• Adjustable chest-strap
• Detachable hip-belt transfers heavy-loads to your hips
• Trolley-Sling
• Cabin luggage compatible

SPECS:

• Outer dimensions: (H/B/T): 52 x 35 x 23-26*cm / 20.5” x 13.75“ x 9“-10.25“* (*extended)
• Inner dimensions: 45 x 32 x 14 -17* / 17.75“ x 12.5“ x 5.5“-6.75“* (*extended)
• Weight: 2,3 kg / 5lb
• Color: black/grey (Item-No.: 47892 / EAN:4041212478924)

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Flair for your vinyl. Slide one of our weighted 45 rpm adaptors onto the spindle of your turntable to play your favorite 7”. The heavy duty enameled metal disc comes packaged in our custom muslin pouch, perfect for toting along to a party or your next spin session.

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Length 1.5 m | 4.92 ft
Weight 0,10 kg / 0.22 lbs
Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 C-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

The Sichtexot "Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Here comes the add-on to our latest concrete turntable collaboration between HHV and BETONAT: the 100% Concrete Vinyl Stand. With a simple and straightforward design featuring clear shapes, this stand celebrates the fusion of urbanism, music, and subculture.

Handcrafted from 100% concrete, this vinyl stand is aesthetically pleasing and its minimalistic design complements any modern living space.

Whether you’re a collector or just starting out, the Vinyl Display Stand is the perfect way to show your favorite records.

Original HHV × BETONAT Vinyl Display Stand
Suitable for 7″ vinyl singles & 12″ vinyl LP, not for double LP
118 mm length x 48 mm height x 60 mm width
0.55 kg pure concrete
100% handmade in Berlin Neukölln
Beautiful gift box

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange, Yellow and White colors which is perfect to personalize the cartridge the way you want it.

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The Tupac Shakur "West Coast" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Mr Bongo Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Ramones "Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box (not included: item no 862291)
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

• Surface mount LED's for long life
• Illuminates outward - no reflector
• Balanced voltage - no resistors needed
• Easy installation - soldering required
• Comes as a pair - x2 LED circuit boards. (Connect with cables from SL unit.)
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Symbolic picture!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Pure white paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 mm x 180 mm
• material: 80 g/m² pure white premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 50 pieces

THE ULTIMATE PORTABLE TURNTABLE.
Reloop SPIN is a portable turntable that guarantees mobile fun anywhere you want! The turntable comes with everything you need out of the box and is especially optimized for scratching and cutting.

BLUETOOTH STREAMING
OF YOUR MUSIC
The Bluetooth Audio Streaming technology allows wireless streaming of music or beats via SPIN – this way the turntable becomes a speaker for your smartphone.

INCLUDING 7'' SCRATCH VINYL
SPIN comes with a 7'' slipmat and an exclusive 7“ scratch vinyl containing specially mastered scratch samples and beats for beginners and experienced scratch artists alike.

FLEXIBLE POWER OPTIONS
Enjoy your records on the road: SPIN is extremely portable, not only due to its shape and small form factor, but also thanks to its flexible power options. It can be used with a regular USB power supply unit (5 V, 2 A), USB power bank or rechargeable batteries*. The batteries can be inserted in the compartment on the bottom and are sold separately. A power LED keeps you informed about the turntable's operational status. The dust cover protects the turntable and thanks to the handle, SPIN can be carried like a suitcase. Skip-proof rubber feet guarantee stability.

*USB power supply, batteries or power bank are not included

OUTSTANDING FOR MOBILE SCRATCHING AND CUTTING
Via the switch on the turntable's top panel you can select between 3 speeds (33 1/3, 45 & 78 rpm) which covers all available speeds. The straight tone arm offers enhanced stability and can be fixed into position with a transportation lock. The pre-installed cartridge has excellent tracking features and holds the groove tightly, even when carrying out fast scratches.

45-MM CROSSFADER
PRE-INSTALLED
The precise 45-mm crossfader has a unique form factor and thanks to the two-rail technology it is especially sturdy. Moreover, it is possible to install the crossfader on either side of the platter – simply select your preferred position.

EXTENSIVE CONTROLS & ADJUSTMENT POSSIBILITIES
On the top panel you can find a start/stop button as well as a pitch control with a range of +/-20 % for precise setting. A tone control can be used to adapt the sound of the lows to your requirements. Volume for the AUX input and master/headphones output can be adjusted via two separate controls. There is also a 7'' adapter for records with a large centre hole.

EXCLUSIVE SUPER SPIN
DUCK LOOPER APP
With any purchased SPIN, DJ Babu and the Beat Junkies Institute of Sound adds a free copy of their Super SPIN Duck Looper app, which can be used ideally as a backing beat while scratching and cutting.

RELOOP SPIN -
CONNECT THROUGH VINYL.
Through the combination of turntable and mixer as well as the high connectivity, SPIN is ideal for vinyl lovers as well as scratch artists and aspiring DJs.

SPIN

Portable turntable for vinyl lovers & scratch artists
Bluetooth streaming, versatile connection possibilities and optional battery operation
Comes with 7'' scratch vinyl, 45-mm crossfader, cartridge and integrated speaker

FEATURES
Portable turntable for vinyl lovers & scratch artists
Mobile fun with your turntable, anywhere you go
Outstanding for mobile scratching and cutting
Out of the box: comes with 7'' scratch vinyl, pre-installed 45-mm-crossfader & cartridge, integrated speaker, Bluetooth audio receiver, USB recording function, slipmat, and dust cover
High-grade 7''-scratch-record: professionally recorded samples for scratching and beats for juggling
Bluetooth audio streaming: wireless streaming of music or beats to the device
Smart USB recording: direct recording of scratches & cuts to USB in MP3 format
Can also be used for digitizing vinyl
Integrated speaker on the turntable's left
3 selectable speeds (33 1/3, 45 & 78 rpm)
Extremely stable tone arm with transport lock
Cartridge with excellent tracking features
Precise 45-mm-crossfader with two-rail glide technology
Crossfader can be installed on preferred side (both-way)
Two headphones connections for listening and monitoring
AUX input facilitates connection of several turntables (daisy chain)
Easy battery charging via USB PSU or USB power bank (sold separately)
Installed start/stop button
Precise speed adjustment via pitch control with +/-20 %
Tone control to adjust low frequencies
Volume control for AUX input and master/headphones
Power LED indicates the turntable's operational status
7'' record puck adaptor with holder
Anti-skip rubber feet for secure stand
Especially sturdy and portable shape factor with optional battery operation
Additional protection thanks to dust cover; can be transported via carrying handle when closed
Locking of dust cover for safe transport
Can be operated with regular USB PSU (5 V, 2 A), USB power bank or batteries (sold separately)
Batteries can be inserted into battery compartment on the device's bottom 2x Li-Ion 18650 (sold separately)
Incl. 7'' scratch vinyl, pre-installed cartridge, slipmat, dust cover, puck adapter, instruction manual and Super Spin Duck Looper app

TECHNICAL DATA
Belt drive
Inputs: AUX 3.5 mm stereo, Bluetooth audio
Outputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereo
Recording format: MP3 with 256 kbit/s
Recording quality: 16 bit / 44.1 kHz
Battery type: 2x Li-Ion 18650 with 1860 mAh each (batteries sold separately)
Power supply: 5 V, 2 A micro USB (PSU sold separately)
Dimensions: 370 x 95 x 260 mm
Weight: 1.61 kg

manual: https://www.reloop.com/media/custom/upload/Reloop-spin_instruction_manual_20190604.pdf

This record player with external speakers and its minimalistic design has a satisfying listening experience due to the aluminium platter, NP15 diamond needle and tone arm with adjustable counterweight. In combination with the Bluetooth function the T150 record player has everything you need.

• 2-speed record player
• Plays 7”, 10” or 12” records
• 2 external speakers - 4”, 4Ω, 15W
• NP15 diamond needle
• Belt-driven
• Pitch Control
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC power adapter
• Aluminium tonearm with adjustable counterweight
• Full-size aluminium platter
• Dimensions: 40.5 cm (l), 31.5 cm (w), 5.5 cm (h)
• Speakers: 13 cm (l) 15 cm (w) 20 cm (h)
• Weight: 3.3 kg

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

The Glorious Turntable Lowboard is a high-quality piece of furniture in a retro 1960’s design and is ideal for placement in your living room. With a dedicated surface for a turntable and plenty of space for your vinyl collection, the Turntable Lowboard is ideal as a listening station. The open record crate invites you to dig through your collection and allows direct access to up to 130 12''-records.

• High-quality turntable lowboard in 60s retro design for your living room
• Listening station: provides storage space for a turntabel and plenty of space for records
• Open record crate for diggin through you collection and access to up tp 130x 12"-records
• Front compartment with push mechanism for amplifiers, CDs or boocks
• Cavity on the rear panel hides unsightly wires
• Timeless design made of wood with white high-gloss finish
• Stable and elegant stand made of solid ash wood (white ash)
• Shock-absorbing rubber feet for damping vibrations

Material corpus: MDF wood with white high-gloss veneer
Material stand: Ash wood (white ash)
External dimensions corpus: 862 x 240 x 420 mm (L x H x W)
Overall height: 444 mm
Weight: 17 kg

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Premium Alignment Tool

Your go-to precision companion for perfecting your turntable setup. Crafted to the highest standards, this tool is a larger and sturdier version, boasting a remarkable 75% increase in rigidity compared to the standard model.

The Premium Cartridge Alignment Tool features a robust build, providing enhanced durability and stability during the alignment process. Its larger size ensures a more secure grip and heightened accuracy.

With two zero points Baerwald alignment, this tool is engineered to deliver optimal tracking performance. Achieve precise cartridge alignment for accurate playback, allowing you to experience your vinyl collection with unparalleled clarity and fidelity.

How to use the alignment tool:
https://ortofon.com/pages/alignment-tool

Technical details:
• Dimensions: approx. 108 x 45 x 1,6 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

NEW - Now with alcohol-free Disco-Antistat Ultraclean concentrate - NEW

Practical care set for record cleaning.
Disco-Antistat Ultraclean Concentrate, works deep into the groove and cleans your records gently and thoroughly even from stubborn dirt.

The care set consists of:
* Washing housing with inserted brushes made of goat hair and practical axle lock.
* Exchangeable cleaning brushes
* Label cover with suspension axle for LPs, singles and 10 inch
* 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
* Bottle for mixing the cleaning agent
* Funnel and filter with which the liquid can be filtered back into the bottle after use.
* Drip stand (drying stand) with collection tray for up to 15 LPs or singles (slides into the case after use).
* Housing with NEW - non-slip rubber feet - NEW
* NEW - Label cover with sealing rubber and hand crank for LPs/Singles/10".
* NEW - Filling line "max." - NEW for marking the filling level of the cleaning liquid.

Made in Germany!

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Look after your records and turn them into a work of art with this 12" frame. Make a centerpiece out of your favourite records, the perfect addition to any room in your home! The Lasgo 12" Album Cover Frame is perfect accompaniment for any music lover's music collection, made from compressed wood. Size: 36 x 36 cm (14" x 14").

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

With the set of roll container, register and storage boxes, Record Box is making an attractive offer for passionate vinyl collectors: Buying a set represents a price advantage compared to buying the components individually and offers an uncomplicated and individual solution for the mobile storage of records and more.
When developing the Record Box furniture system, the specific needs of vinyl collectors were directly taken into account. In this way, the storage box and the register box can be easily attached to the rollboard and added to a piece of furniture that is as practical as it is attractive. The register box is the top end and invites you to leaf through the records stored in it.
The three modular pieces are connected using specially developed glue dots that can be easily removed at any time. In the blink of an eye you can create a side table, a roll container, coffee table or record shelf that can be moved freely around the room.
The furniture is made of high quality MDF with a robust melamine coating and offers an attractive price-performance ratio.
The set is available in black and white, offering space for around 200 records and, like the other modules of the Record Box furniture system, is used to implement creative and individual solutions for vinyl storage and presentation.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x78cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x 12-inch 100 register box
• 1x connecting elements glue dots from »Record Box«
• Assembly instructions
• Material: 15 mm MDF with melamine coating - white or black
• Boxes for self-assembly - screwdriver required!

In addition to the record and register boxes, Record Box has a special offer for vinyl collectors and lovers of modern furniture systems: With the highboard set consisting of 4 boxes for 12-inch records + top & baseboards, customers benefit from attractive price savings compared to purchsing the boxes separately.
The sets are particularly interesting for collectors who already have a large number of records and want to get a lot of storage space for an attractive price. The record boxes as part of this set offer space for approx. 450 12-inch records.
The highboard set is available in classic white and black, can be expanded as required and individually supplemented with other products from the Record Box furniture system to create unique pieces of furniture. Whether as a DJ rack, hi-fi furniture, room divider or record shelf - the possible uses of the highboard are almost unlimited.
The set consists of four record boxes that are placed on a baseboard. A top board forms the upper end with a smooth, straight surface.
The unique furniture system from Record Box stands for diversity, which allows vinyl collectors to realize their individual wishes for the storage and presentation of their records. Like all furniture in the Record Box System, the boxes and boards are made of high-quality MDF, which has been covered with a robust layer of melamine. Innovative adhesive dots reliably protect against slipping. A wall mounting set is available in the shop for additional security.

4 boxes for 12 inch records + top & baseboards
Technical details & components set:
• Dimensions of the furniture in total: approx. 72.3 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard small
• 4x 12-inch 110 storage boxes
• 2x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

Record Box stands for creative furniture that gives vinyl collectors the chance to create unique pieces of furniture for storing and presenting records. The Record Box roll container is a furniture piece that can be moved around the room.
The set consists of a 12-inch record box that stands on a rollboard. The box offers space for around 110 records. The storage box is connected to the rollboard by specially developed glue dots. The set can be used as side table, roll container, office container for folder storage, a coffee table or a mobile record shelf.
The set offers a price saving compared to buying the elements individually. It is ideal as a creative addition to individually built vinyl furniture from the Record Box system and is available in black and white.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x46cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

With the Record Box Highboard Det with 6 boxes for 12-inch records + top & baseboards, an individual piece of furniture can be constructed in no time, which offers vinyl collectors plenty of space for the presentation and storage of their records. In combination with the top and baseboards, the six record boxes create an approximately 1.08 m wide, 76 cm high and 36 cm deep highboard with space for more than 600 records.
Compared to buying the boxes and boards individually, the set offers an attractive price and is an ideal starter set for vinyl lovers who want to gradually expand their existing collection.
The highboard set is available in black and white and can be expanded as required with the register and record boxes from the Record Box system to create individual pieces of furniture. With creativity, unique highboards, DJ racks, room dividers and shelves can be created.
The record boxes of the set are stacked on a baseboard and connected using the innovative glue dots. The top board that belongs to the set forms the upper end with a straight surface.
Record Box was specially designed for vinyl collectors and offers attractive storage space for records and much more with various boxes and practical sets.
All furniture in the system is made of high-quality MDF with a robust melamine coating. A wall securing set is available in the shop for a connection to the wall.

Technical details & components of the set:
• Dimensions of the furniture in total: approx. 108.5 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard large
• 6x 12-inch 110 storage boxes
• 3x sets of glue dots
• 1x wall mounting set
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

7" Dividers for single collections, black

• 185 x 210 mm
• Rounded edges
• One side matt/sand-blasted, one side glossy/smooth
• Can be labelled with felt markers, writing can be removed with alcohol
• Made in Germany

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

Experience exceptional sound clarity with Audio-Technica's ATH-S220BT wireless headphones, featuring up to 60 hours’ battery life and multipoint connectivity.

ATH-S220BT are lightweight, relaxed-fit headphones built to provide extended comfort. Weighing in at just 180g (6.3 oz) - around the same weight as a 12" vinyl record - the ATH-S220BT headphones’ intelligent design helps prevent neck and shoulder strain so you can enjoy album after album or gaming sessions with friends.

From listening to your favourite tunes through your smartphone to browsing the latest viral videos on a laptop or tablet, you’ll experience powerful sound from every source.

Since 1962, Audio-Technica has been devoted to providing listeners with the very best in sound quality and there’s no compromise to that dedication when it comes to our truly immersive ATH-S220BT best budget wireless headphones

These affordable wireless headphones also have a quick charge feature - they can be charged in ten minutes for 3.5 hours of listening time. Plus, with a USB type A to USB Type C™ cable included, you’re able to charge with ease using a variety of different devices.

If you’re looking for the best headphones under £100, look no further. Incorporating an abundance of features, the ATH-S220BT headphones are also compatible with both Siri and Google Assistant, so you’re able to access your device’s speech recognition function at the touch of a button. Receive notifications, send messages and control your audio playback without lifting a finger.

Features:

60 Hr Battery
The Audio-Technica ATH-S220BT is an ideal choice for those looking for Bluetooth headphones with a long battery life – making them a reliable travel companion or top selection for settling down to listen to your favourite album or podcast.

Multipoint Pairing
Connect to your smartphone, PC or tablet simultaneously and take the stress away from having to switch between multiple devices.

Built-In Mic and Controls
You’ll experience exceptionally clear audio thanks to the ATH-S220BT’s high-quality built-in microphone.

Wired and Wireless Listening
For a wired audio experience, use the included 1.2m cable. With a built-in microphone and remote, the plug-in option provides the ultimate flexibility for those wishing to experience superior sound whilst conserving battery power.

Immediate Voice Sync on Videos
Whether you’re watching TikTok videos on your daily commute or enjoying the latest Netflix series, even the slightest audio lag can impact your experience. With low latency mode on the Audio-Technica ATH-S220BT, you can enjoy minimal sound delay and crystal-clear audio.

• Up to 60 hours of continuous use on a full charge and up to 3.5 hours of use on a 10-minute rapid charge (via USB-C connection)
• Slim housings with sleek, lightweight earpads exert less pressure on your ears for a comfortable fit with good sound isolation
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Google Fast Pair lets you quickly pair headphones with an Android smartphone or other device
• Voice guidance function provides helpful notifications, including power and pairing status, and remaining battery level
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
• Type: Closed‐back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 - 32,000 Hz
• Sensitivity: 105 dB/mW
• Impedance: 32 ohms
• Battery: DC 3.7 V lithium polymer battery
• Battery Life: Approx. 60 hours continuous use (music playback)
• Weight: Approx. 180 g (6.3 oz)
• Charging Time: Approx. 4 hours
• Cable: Detachable 1.2 m iS controller cable with mic
• Connector: 3.5 mm (1/8″) stereo mini
• Microphone Type: Electret condenser
• Microphone Sensitivity: ‐42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 - 4,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Accessories Included: USB charging cable (30 cm (12”), USB Type‐A / USB Type‐C) cable with in‐line mic and control (1.2 m (3.9’) /3.5 mm (1/8”) gold‐plated stereo mini‐plug (4 pole/L‐shaped))
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight ‐ approx. 10 m (33')