DJ Equipment 112 Items

Lightweight 45" bag holds about 50 of your favorite PPU singles.

The excellent Dr. Suzuki Slipmats are now available in blue!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

AT-VMN95E
VM95 SERIES ELLIPTICAL REPLACEMENT STYLUS
Aluminium cantilever
Elliptical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

AT-VMN95C
VM95 SERIES CONICAL REPLACEMENT STYLUS
Aluminium cantilever
Conical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Das Tonabnehmer-Set AT-VM95E/H wird im Audio-TechnicaWerk
in Fukui (Japan) vormontiert, getestet und verpackt.
• Gesamtgewicht 15,5 g

AT-VM95E/H
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95E/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95E

AT-VM95C/H
VM95 SERIES CONICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japa

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95C/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95C

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Model AT-VM95C
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95C
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Stylus for Goldring E2 MM Cartridge

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

The worlds smallest portable rechargeable subwoofer is getting an upgrade!

Everyone loves bass, we decided to take the Subwoofer to the next step, rather than the old 30 watts of power it now has 40 watts of power! This ultimatly gives you a cleaner low that matches the new Minirig 3!

• Dimensions W = 101.6mm H = 213mm
• Weight 875g
• Driver Custom 74mm with double neodymium motor system
• Frequency response 48-120Hz
• Battery life max volume 8 hours
• Battery life average use 30 hours
• Battery life low volume 80 hours
• Input power USB (5V DC @ 1500mA)
• Output power USB (5V DC @ 1500mA)
• Charging time 4-5 hours
• Audio input/output 2 x 3.5mm mini jack socket
• Construction Anodise aluminium and high impact ABS

ATN-XP3
Replacement Stylus for AT-XP3
Conical Bonded Stylus
Carbon fibre-reinforced ABS cantilever
Durable design for DJ application

AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

• Surface mount LED's for long life
• Illuminates outward - no reflector
• Balanced voltage - no resistors needed
• Easy installation - soldering required
• Comes as a pair - x2 LED circuit boards. (Connect with cables from SL unit.)
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - DJ S

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Length 1.5 m | 4.92 ft
Weight 0,10 kg / 0.22 lbs
Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 C-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

Replacement stylus Nagaoka JTS-80LB for the pickup JT-80LB.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: deep blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The Reloop Knobs bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple caps are a great addition to your set-up. Supplied in packs of 8, they're also perfectly complemented by Reloop's new Fader Caps. Customise your gear and stand out from the crowd.

FEATURES
• 8 knob caps
• Suitable for all potentiometers with d-shaft
• Rubber coating for tight grip
• Ergonomic knob cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 20 g (packaging unit)
• Dimensions: 7 x 12 x 7 mm

The Reloop Knobs bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple caps are a great addition to your set-up. Supplied in packs of 8, they're also perfectly complemented by Reloop's new Fader Caps. Customise your gear and stand out from the crowd.

FEATURES
• 8 knob caps
• Suitable for all potentiometers with d-shaft
• Rubber coating for tight grip
• Ergonomic knob cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 20 g (packaging unit)
• Dimensions: 7 x 12 x 7 mm

The Reloop Fader Caps bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple fader caps are a great addition to your set-up. Supplied in packs of 5, they're also perfectly complemented by Reloop's new Knob Caps. Customise your gear and stand out from the crowd.

FEATURES
• 5 fader caps
• Rubber coating for tight grip
• Ergonomic fader cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with the most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 14 g (packaging unit)
• Dimensions: 15 x 8 x 3 mm

The Reloop Fader Caps bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple fader caps are a great addition to your set-up. Supplied in packs of 5, they're also perfectly complemented by Reloop's new Knob Caps. Customise your gear and stand out from the crowd.

FEATURES
• 5 fader caps
• Rubber coating for tight grip
• Ergonomic fader cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with the most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 14 g (packaging unit)
• Dimensions: 15 x 8 x 3 mm

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

In cooperation with maeshbag - a small local bag design company - Oonops Drops produces sustainable, resource-saving and under social cultural aspects with their organisation @unter.einem.dach.

Thanks to its easy bike-locking system the bag sits safe and looking cool at your luggage carrier in many different colors. Each one is handmade, unique and 90% sustainable because it's made out of old banners and mesh. The bag is waterproof and upholstered to protect your little treasures.

Furthermore it's comfortable to wear and with its clever magnetic two-finger shoulder strap click-system it's quick'n'easy to unlock while your DJ-sets. It holds around 65-115 singles depending which sleeves you use and in which direction the records are stacked. An innerbag lets you stow your equipment like headphones, adapters, cartridges & styluses.

Summarizing: »Unter einem Dach« creates jobs for talented women with a migrant- and refugee background and supports them with inhouse language courses and much more. So if you support this bag you'll support their organisation to grow and to do more great projects they initiate.

Each Bag is an unique upcycled item, buying it you are the only one with one of a kind!

Weight: 1 kg
Size: L: 28cm B: 20cm (incl. bike-locking system 24cm) H: 23cm Shoulder Strap: 133cm
Made in Germany

chateau vinyl solo | nylon klein blue stealth edition

chateau vinyl offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: klein blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl offeres a perfectly protected,
shock absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water resistent 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton

colour: deep blue

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: deep blue

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

minimalistic, cubistic everyday bag.
designed by the a2 department in cooperation with playhouse records.
made from water-repellent cotton with finest italian leather details.
holds all necessities for a modern but craftmenship conscious everyday life.

_small outside pouch on the backside
_2 inside pouches, one with small ykk zipper
_adjustable shoulder strap with embossed leather cushioning &
stiffened bottom
_space for up to 50x 12" vinyls
_bag body and top not cushioned, just lined

material: water-repellent cotton & premium leather

colour: deep blue

made in germany

33 x 33 x 15 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo

material: water-repellent cotton w/ genuine leather details

colour: deep blue

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: green

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

The excellent Dr. Suzuki Slipmats are now available in green!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

DJ-03 HD - CARTRIDGE INCL. HEADSHELL

This is the Nagaoka DJ cartridge. With a high output voltage of 6 mV and a recommended tracking force of 3 - 5 g, it is one of the more stable of its kind.

TECHNICAL SPECIFICATIONS:
• Cartridge type: MM
• Configuration: Climax DS/DSM
• Output voltage: 6 mV (5 cm/sec.)
• Frequency Characteristics: 20Hz~20KHz
• Channel separation: 20 dB (1 kHz)
• Channel balance: 2 dB or less
• Load resistance: 47 kΩ
• Load: 100pF
• Cantilever: aluminum alloy
• Needle Tip: 0.6 mil tapered bonded diamond
• Recommended tracking force: 3~5g
• Pickup weight: 5.1g
• Weight with headshell: 15.1g

Replacement stylus Nagaoka G JN-03D for the pickup DJ-03HD.

Stylus for Goldring E4 MM Cartridge

Just needle, not the complete cartridge included!

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Next level authenticity with the 2M Blue
The goal for any cartridge should be to reproduce the sound as close to the artists vision as possible, and the 2M blue takes you further on this journey of authenticity. With the 2M Blue, you get serious about listening to vinyl.

Features:
The 2M Blue features a Nude Elliptical diamond and split pole pins with a copper wire.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details compared to the 2M Red model.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 25 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Blue
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Kurt Blue) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Kurt Blue)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal