DJ Equipment 880 Items

DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - DJ S

sub – bass line synthesizer and sequencer with parameter locks, punch-in effects and play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in bass oriented play styles
parameter locks
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-12/en

The slim AIAIAI TMA-2 Headband H01 is made from H01 polycarbonate (SKU 01201) and equipped with PU foam padding for high comfort.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.?? These Performance Series pressings are packaged as a single vinyl and available in three classic colours.

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the color throughout a run. Every record is unique.

• Personalise your turntable with slipmats
• Provides protection for your vinyl from scuffs and scratches and also for your turntable
• Made from high quality felt, our slipmats make DJing mixing easier
• Vibration dampening qualities
• 12“ diameter

Combining the company’s century-old legacy with modern-day convenience, GR3 represents Goldring’s stylish re-entry into the turntable arena.

Developed in collaboration with a renowned British hi-fi manufacturer, GR3 is equipped with the multiple award-winning Goldring E3 moving magnet cartridge, offering true plug-and-play functionality. Its built-in phono pre-amplifier allows seamless compatibility with any amplifier or powered speaker, while designed to maximise the flywheel effect, its Phenolic resin platter ensures consistent rotational speed for enhanced audio fidelity.

Additionally, GR3 comes with a choice of high-quality interconnects from Goldring’s world-renowned sister brand QED, ensuring a vigorous connection and sound quality.

Key features at a glance:
• Pre-fitted with a Goldring E3 moving magnet cartridge: This serial award-winning cartridge comes pre-installed and perfectly aligned on the GR3 tonearm, offering a balanced, refined and dynamic sonic performance.
• Built-in phono stage : For maximum convenience, GR3’s integrated pre-amplifier enables effortless connections to any amplifier or powered speaker of choice.
• Phenolic resin platter: Designed to maximise the flywheel effect, the platter ensures consistent rotational speed for enhanced audio fidelity.
• Choice of QED interconnects: Goldring provides a choice of either a 1.5 m phono-to-phono or a 3 m phono-to-3.5 mm cable from QED, one of the most respected names in audio interconnects and cables, ensuring optimal connection and sound quality.
• Elegant design: GR3 pairs premium performance with a high-gloss black plinth and perspex dust cover, offering a sophisticated aesthetic that matches its superior sound.

Pre-fitted Goldring E3 moving magnet cartridge
Goldring’s E3 cartridge is considered one of the best performers at its price point – just see the six consecutive What Hi-Fi? best buy awards for proof. Combining plug-and-play simplicity with uncompromised audio performance, the E3 arrives pre-fitted and pre-adjusted to the GR3 tonearm.

It features a stiff and lightweight aluminium cantilever offering accurate tracking, more detail and reduced distortion, while a 'dual magnet' generator ensures authentic reproduction, better channel separation and a more musical soundstage. Designed and engineered in the UK, micro-adjustments during production ensures a consistent and reassuring performance for the life of the product.

Built-in phono stage
Not every amplifier or powered speaker has the necessary gain and EQ to deal with the signal from a turntable. So, to make life easier, GR3 boasts an integrated phono pre-amplifier in order to do this job. It means this single turntable that can happily connect to any amplifier or powered speaker you decide to use without the need for extra phono amplification or boxes. Combine it easily with Q Acoustics M20 or M40 powered speakers for a user-friendly and musically powerful vinyl system.

Phenolic resin platter
The remarkable speed stability of the GR3 is maintained by employing a phenolic resin platter with an enhanced fly-wheel effect. By distributing the majority of its considerable mass at the outside of rotation, inertia is increased and therefore speed variations are suppressed. This gives the GR3 a very good wow and flutter performance which in turn ensures that the fidelity of its musical reproduction remains high.

Choice of QED interconnects
Goldring’s sister company, QED, is one of the most credible and highly regarded manufacturers of analogue and digital interconnects in the world - so choosing either a 1.5 m phono-to-phono or 3 m phono-to-3.5 mm cable to plug GR3 into a compatible amplifier or powered speakers, ensures a stable and robust connection.

Elegant design
To complement the GR3’s class-leading performance, a combination of a stylish high-gloss black plinth, covered by a perspex dust cover delivers a premium and sophisticated design that can match perfectly with any system or fit seamlessly into any interior design space.

Specifications:
• Tonearm: Hand assembled and carefully matched tonearm
• Cartridge: Factory-fitted Goldring E3 moving magnet cartridge
• Motor: 24 Volt low noise, low vibration motor
• Plinth: Gloss Black finish with Goldring gold branding
• Platter: Phenolic resin with flywheel mass on the rim
• Phono amp RIAA accuracy: (100 Hz to 20 kHz) ±0.4 dB, typically better than ±0.25 dB
• Dimensions (lid closed) (W x H x D): 450 x 120 x 360 mm
• Weight (unpacked): 5.5 kg

Stanmore III has an even wider soundstage than its predecessor, delivering home-filling Marshall signature sound, re-engineered for a more immersive experience. The two-way driver system delivers a heavy but balanced sound, with crisp, soaring treble and controlled bass that really roars. Easily connect to this speaker from your device using Bluetooth, RCA or 3.5 mm and get listening.

STANMORE III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA)
With next-generation Bluetooth 5.2, the RCA input and the 3.5 mm input, connecting to Stanmore III and getting the right sound has never been so effortless. Connect to your speaker directly from your device the way you want to.

PRODUCT DETAILS

POWER AMPLIFIERS:
• ONE 50 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT

TOP PANEL CONTROLS
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 350 X 203 X 188 MM / 13.78 X 8.00 X 7.40 IN

With the Record Box Highboard Det with 6 boxes for 12-inch records + top & baseboards, an individual piece of furniture can be constructed in no time, which offers vinyl collectors plenty of space for the presentation and storage of their records. In combination with the top and baseboards, the six record boxes create an approximately 1.08 m wide, 76 cm high and 36 cm deep highboard with space for more than 600 records.
Compared to buying the boxes and boards individually, the set offers an attractive price and is an ideal starter set for vinyl lovers who want to gradually expand their existing collection.
The highboard set is available in black and white and can be expanded as required with the register and record boxes from the Record Box system to create individual pieces of furniture. With creativity, unique highboards, DJ racks, room dividers and shelves can be created.
The record boxes of the set are stacked on a baseboard and connected using the innovative glue dots. The top board that belongs to the set forms the upper end with a straight surface.
Record Box was specially designed for vinyl collectors and offers attractive storage space for records and much more with various boxes and practical sets.
All furniture in the system is made of high-quality MDF with a robust melamine coating. A wall securing set is available in the shop for a connection to the wall.

Technical details & components of the set:
• Dimensions of the furniture in total: approx. 108.5 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard large
• 6x 12-inch 110 storage boxes
• 3x sets of glue dots
• 1x wall mounting set
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

True Wireless Headphones With Active Noise Cancellation

• Immersive Sound – with aptX Lossless and customisable EQ
• Extended Play Battery – up to 10hrs + 23 (ANC on), 16 + 36 (ANC off)
• Active Noise Cancellation – adaptive hybrid with 3 modes + transparency
• Comfort Fit – choice of 5 pairs of ear tips, in silicone and foam
• aptX Adaptive – interruption-free sound up to 24bit/96kHz
• Bluetooth 5.3 – with greater speeds & data capacity for music transmission
• Clear Voice Capture – Qualcomm 3 mic cVc separates your voice from environmental noise

Designed by Hi-Fi Engineers, Made By Music
We’re obsessed with helping your music sound its best. M100 are our 3rd gen wireless headphones – so we’ve had a chance to really polish them.

aptX Lossless and customisable EQ settings get the most from your music. And so you don’t miss a beat – or a call – in busy areas, we added aptX Adaptive and Bluetooth 5.3 tech. They give a more stable connection for interruption-free listening.

Adaptive hybrid ANC keeps the everyday at arms-length, so you can escape into your own world. Simple touch controls, a comfy fit, and a battery that goes way beyond the ordinary round things up.

Feel Every Beat
Melomania M100 feature two generous 10mm drivers and magnets made from recycled Neodymium. The resulting powerful, but controlled, sound is one that maintains your music’s energy without sacrificing detail – regardless of genre.

Experiment with the choice of ear tips for the best seal, and to keep the sound firmly where it belongs.

Music First
Everyone deserves a great soundstage, low distortion, and high dynamic range. It’s what makes recorded music come alive.

Melomania M100 use Class AB amplification, the same type found in many of our award-winning amps, to deliver the authentic sound quality we’re known for – even when you’re on the go.

Let’s Get Personal
We’ve tuned M100 to deliver our authentic signature Cambridge sound, but we know many people have their own style.

We’ve specified a 7-band graphic equaliser in the all-new Melomania Connect app to build your own custom EQs. Plus, we’ve included 6 pre-set profiles for different music genres or spoken word listening.

Keep the Outside Out
M100 feature adaptive hybrid ANC, which uses information from Feed Forward mics, for external sound, and Feed Back mics, that detect unwanted sound in your ear canal. It automatically adjusts the noise cancellation level based on sound ingress and tightness of fit in the ears.

Enjoy music, podcasts, and calls, uninterrupted by irritating background noise.

Let the Outside In
Activate Transparency mode and shift your attention to what’s going on around you.

With Melomania M100, you can tune into the sound of your surroundings, hold conversations, and listen to public announcements – all without removing your earphones or pausing your playlist.

All Day and All of the Night
M100 continue our tradition of consigning battery anxiety to history, with up to 10 hours of continuous playback possible from a full charge – even with ANC on.

The compact, Qi wireless-compatible charging case stores an extra 23 hours (ANC on) – a lot more albums, podcasts, videos and calls! Take a 10-minute coffee-break charge for a 1.5-hour energy boost.

Your Fit, But You Know It
We supply 5 pairs of ear-tips with every pair of M100 – S & L in premium memory foam or S,M,L in silicone. Experiment to find the best combination for fit, seal and, of course, comfort.

So, whether you’re working, commuting, or simply listening to music, you’ll barely notice you’re wearing them.

High-Tech. As Standard
aptX Lossless works with compatible devices to deliver bit-exact, CD-quality audio with no compression, whilst aptX Adaptive automatically adjusts to keep the music going in busy areas like railway stations at up to 24bit/96kHz.

Bluetooth 5.3 adds extra capacity, speed, stability, and efficiency over its predecessors, helping music, podcasts, video, games and calls to sound their best.

London Calling
When you buy new headphones, they need to be great for calls too. M100 use 3-microphone cVc, a system developed by Qualcomm that helps your voice stand out above environmental noise.

A series of convenient features like Multipoint Connection, Siri and Google Assistant compatibility, reduced-latency gaming mode, and our new Melomania Connect app complete the story.

Designed for Life
Like all our products, Melomania M100 are made to last. They’re designed in London, so IPX4 water resistance was a must. Their compact case protects and charges them in your pocket. The packaging is 100% recyclable and free from plastic.

Technical Specifications:
• HIGH-PERFORMANCE AUDIO MODE: Class A/B amplification
• DRIVER: 10mm Driver Recycled Neodymium Magnets
• BATTERY PLAY TIME (EARBUDS): Up to 16 hours
• BATTERY PLAY TIME (EARBUDS - ANC ON): Up to 10 hours
• BATTERY PLAY TIME (TOTAL): Up to 52 hours
• BATTERY PLAY TIME (TOTAL - ANC ON): Up to 33 hours
• CHARGING TIME: 2.5 hours
• WIRELESS CHARGING: Yes - Qi charging
• POWER SUPPLY: USB-C, Wireless charging
• FAST CHARGE: 10 mins charge = 1.5hrs ANC On | 2.4hrs ANC Off
• NOISE ISOLATION: Qualcomm™ Adaptive Active Noise Cancelling
• TRANSPARENCY MODE: Yes
• MICROPHONES: 6 microphones, 3 per earbud
• VOICE PROCESSING: 3-microphone Qualcomm® cVc™ Echo Cancelling and Noise Suppression (ECNS)
• MELOMANIA CONNECT APP: Compatible
• VOICE ASSISTANT ACTIVATION: Siri / Google Assistant
• IPX RATING: IPX4 water splash resistant
• FIRMWARE UPGRADABLE: Yes
• BLUETOOTH VERSION: Bluetooth 5.3
• TRIPLE-CORE PROCESSOR ARCHITECTURE: Qualcomm QCC3071, Powerful tri-core processor architecture – supporting complex use cases Dual core 32-bit processor application subsystem (up to 80MHz) Single core 240 Mhz configurable Qualcomm® Kalimba™ DSP audio subsystem
• SUPPORTED PROFILES: A2DP, AVRCP, HSP, HFP
• SUPPORTED CODECS: aptX™ Lossless, aptX™ Adaptive, AAC, SBC
• WEAR DETECT: Yes
• LOW LATENCY: <80ms - Gaming Mode accessible via Melomania Connect
• NOISE CANCELLATION: Qualcomm™ Adaptive Active Noise Cancelling
• WIND NOISE REDUCTION: Yes
• GOOGLE FAST PAIR: Yes
• ADJUSTABLE EQ: Yes - 7-band adjustable EQ accesible via Melomania Connect
• OPERATING TEMPERATURE: 0°C to +40°C / 32°F - 104°F
• OPERATING RELATIVE HUMIDITY: 10 to 80%, Non-condensing
• DIMENSIONS (EARBUDS): 22 x 19.2 x 23mm
• DIMENSIONS (CHARGING CASE): 44.5 x 80.2 x 27mm
• WEIGHT: Earbuds: 6.65g each / 0.235 Ounce Charging case: 53.3g / 1.880 Ounce Total: 66.6g / 2.35 Ounce
• WHAT'S IN THE BOX?: Quick Start Guide, USB-C to USB-C charging cable, 3 x silicone eartips (S, M & L), 2 x memory foam eartips (S & L), Brand booklet, Function controls card, Safety instructions

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

MRBT-Mini 2 Bluetooth Speaker (2.0 Stereo HHV Bundle contains:
• 2x MRBT-Mini 2 Bluetooth Speaker

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

Blank, unprinted cardboard sleeve for storing 12 inch picture disc records. This cover is equipped with a large centered die-cut hole, so artwork is available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl LP Picture Cover (Black) - specific details:

• measures: 315 x 312 x 3 mm
• material: cardboard, 300 g/m²
• die-cut diameter: 260 mm centered (single-sided)
• selling unit: 10 pieces
• Made in Germany

45 SANDWICH Record-Bag

Designed for dedictated 45 vinyl-DJs, the all-new MAGMA 45 SANDWICH offers a remarkably sleek and lightweight innovation for carrying your 7“ records.

Constructed with a fully molded, shock-absorbing EVA shell, this case ensures superior protection and a secure fit for up to 150 7“ records.

The unique 50/50 "Sandwich" style enables the lid to serve as a second storage section, making organizing and flipping through your 45s more convenient. Tailored for seasoned 45 collectors on the move, the 45 SANDWICH seamlessly combines style and functionality, ensuring a solid and efficient travel companion for your musical treasures.

​Also available as strictly limited FUNKFREAKS and DUSTY DONUTS Edition!

FITS:
• 120-150 x 7“ records

BASICS:
• Compact and lightweight design
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting 1680D Polyester exterior shell
• Molded interior for additional protection
• 50/50 Sandwich style enables the lid to serve as a second storage section
• Sturdy zipper
• Embossed molded feet
• Including shoulder strap (with metal hook)
• Including trolley sling

SPECS:
• Outer dimensions (H/B/T): 38 x 22 x 24 cm
• Inner dimensions: 33 x 19,5 x 20 cm
• Weight: 1,1 kg

A true MAGMA classic. The LP-Bag 100 Trolley is a proven practical and convenient transportation solution to carry up to 90 12″ vinyl records. The new reinforced design has been rigorously tested to insure the highest strength and stability to carry your precious records well protected.

FITS

90 12“ Vinyl
Headphones
Needle-case
Cables

BASICS

Durable, water-repellent 480D Nylon and high quality zipper
Telescopic handle on a sturdy reinforced trolley-board system
Holds approximately 90 records
Extra-thick 2,5 cm thick padding all around the main compartment
Padded back wall to protect the telescopic handle from damage
Lockable zipper on main compartment
3 exterior pockets for headphones, needles and other accessories
Comfortable carrying handle and detachable padded shoulder strap

SPECS

Outer measures: 38 x 45 x 38 cm
Inner measures: 32 x 31 x 28 cm
Weight: 4,2 kg


Color: black/black (Item-No.: 40500/ EAN-Code: 4041212405005)

The Technics Slipmat is made from lightweight felt and equipped with a timeless graphic print that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

• Pioneer DJM-V10
• Pioneer DJM-A9
• Pioneer DJM-900 NXS2
• Pioneer DJM-900 NXS / SRT
• Pioneer DJM-800 / 700 / 600
• Pioneer CDJ-3000
• Pioneer CDJ-2000 NXS2
• Pioneer CDJ-2000 NXS
• Pioneer CDJ-900 / 850 / 800
• Pioneer XDJ-1000
• Allen & Heath PX5
• Allen & Heath DB4
• Allen & Heath DB2
• Allen & Heath Xone 92 / 62 / 43C
• Denon LC 6000 Prime
• Denon SC-6000 / SC-6000M
• Denon SC-5000 / SC-5000M
• Denon X1850 / X1800
• Denon X1600
• Denon SC3900
• Denon SC2900
• Reloop RMX-90 DVS
• Reloop RMX-80 Digital
• Ecler Warm 4
• Ecler NUO4
• Rane MP2015
• Rane Sixty-Eight / Sixty-Four

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Solid aluminum profiles and spring loaded latches
• Additional foam to fit various mixer and CD-player models
• 3 removable front panel covers
• Convenient cable access ports
• Full padded interior
• Incl. recessed wheels for easy transportation

SPECS:

• Outer measures: 80 x 59 x 22,5 cm
• Inner measures: 33,1 x 42,5 x 8,4 cm (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
• Weight: 21,5 kg

OP–1 field is an all-in-one battery-powered synthesizer, sampler and drum machine. OP–1 field is packed with features including: a built-in speaker, microphone, multiple effects, vocoder, fm radio, bluetooth midi, even a velocity sensitive keyboard. it's the most powerful portable synthesizer available.

• 12 synth engines
• sampler, drum machine and sequencer
• tape recorder
• built in effects
• ultra-portable
• dimensions: 28.8 cm x 10.2 cm x 2.9 cm
• weight: 589 g / 20.8 oz

The AIAIAI TMA-2 Cable C05 is a straight cable. 4 mm / 1.5 m.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

The WARM4 is a professional analogue rotary DJ mixer with four channels, developed and produced by ECLER in Barcelona.
It has 4 phono/line channels, 2 microphone inputs, classic sharp filters and a 4th order isolator. The WARM4 also includes a unique feature: an analogue subharmonics synthesizer that can be selected per channel and is specifically designed to generate and amplify ultra-low frequencies.
The WARM4 is ECLER's latest analogue rotary mixer, inspired by New York's disco "Paradise Garage", also referred to by François Kevorkian as the "Temple of Music", whose influence has been instrumental in shaping some of today's best clubs. Designed and manufactured in the Barcelona factory, the WARM4 is a mixer that keeps the classic structure of ECLER mixers in mind, but incorporates completely redesigned circuitry and mechanics. This ranges from new circuit boards that further improve the noise floor and dynamic range, to the rotary pots that are carefully hand-assembled by our production team.
Staying true to the innovative spirit since the first A4 mixer in 1971, ECLER presents a DJ tool never before included in a mixer: an analogue subharmonics synthesiser. Inspired by the original device from the "Paradise Garage" DJ booth, we have developed our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the DJ can adapt it individually to the track and the respective sound system.
The WARM4 also features the 4th order isolator already included in the WARM2, as well as 4 mixing channels, 3-band equaliser with full cut per channel and high quality potentiometers from Alps with metal axis. Using an external effects module has also never been easier. The WARM4 can output a PRE/POST fader signal and lets you control and pre-listen to the return signal.
The WARM4 is designed specifically for sound systems that can reproduce subsonic frequencies - for clubs, festivals and events where bass response is crucial.
Unleash a whole new dancefloor experience and take the music experience to the next level!

Technical details:
AUDIO PERFORMANCE
INPUTS:
-
Number of inputs:
LINE: 4 stereo unbalanced inputs
PHONO: 4 stereo unbalanced inputs
MIC: 2 mono balanced inputs
FX RETURN: 1 stereo unbalanced input
Connection types:
LINE 1-2-3-4: RCS STEREO
PHONO 1-2-3-4: RCS STEREO
MIC 3: XLR3-F
MIC 4: Combo XLR3-F/6.3mm jack balanced
FX RETURN: RCS STEREO
Input sensitivity nominal / impedance:
LINE: 0 dBV / 50kΩ
PHONO: -40 dBV / 50kΩ
MIC: -50 dBV / >1kΩ
FX RETURN: 0 dBV / >6kΩ
POWER:
-
Frequency response:
LINE: 10Hz÷30kHz -1dB
MIC: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB
THD+N:
LINE: <0.004%
MIC: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%
CMMR (Common-Mode Rejection Ratio):
MIC: >75dB at 1kHz
Signal-to-noise ratio:
LINE: >105dB
MIC: >90dB
PHONO: >100dB
FX RETURN: >110dB
Trim control / tone control for inputs 1-2-3-4:
INPUTS 1-2-3-4: ±15dB
BASS: +10/-30dB
MIDDLE: +10/-25dB
TREBLE: +10/-30dB
Trim control / tone control for the isolator:
BASS: +12/-70dB
MIDDLE: +12/-40dB
HIGH: +12/-70dB
Sound filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MIDDLE: 200Hz÷6.8kHz
HIGH: 6.8kHz
Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz÷4kHz
MIDDLE:
HIGH: 4kHz
Analogue subharmonics synthesiser:
Input selective filter: 50÷120Hz
Harmonics synthesis: 25÷60Hz
Maximum output level: +12dBV
OUTPUTS:
-
Number of outputs:
HOUSE: 1 stereo balanced outputs / 1 stereo unbalanced outputs.
BOOTH: 1 stereo balanced outputs / 1 stereo unbalanced outputs
HEADPHONES: 2 stereo unbalanced outputs
FX SEND: 1 stereo unbalanced output
REC: 1 stereo unbalanced output
Connection types:
HOUSE: XLR3-M STEREO / RCS STEREO
BOOTH: XLR3-M STEREO / RCS STEREO
HEADPHONES: jack stereo 6.3mm / jack stereo 3.5mm
FX SEND: RCS STEREO
REC: RCS STEREO
Output level / Minimum load:
HOUSE (balanced): 0dBV/600Ω 1V *(+12dB 4V).
HOUSE (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (balanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ
Maximum undistorted output level:
HOUSE (electrically balanced): 21dBV (23dBu)
BOOTH (electrically balanced): 21dBV (23dBu)
HOUSE (unbalanced): 21dBV (23dBu)
BOOTH (unbalanced): 21dBV (23dBu)
ELECTRICAL
Power supply: Internal
AC mains voltage: 90-264VAC 47-63Hz
AC mains plug: 15A IEC inlet plug
Rated power consumption: 39 VA
OTHER
Control mode: Rotary with Alps Blue Velvet potentiometers and Alps RK09L potentiometers
Phantom power: 18VDC/5mA max (ON by default)
Input VU meter: LED 12 segments (-38dBV ÷ +10dBV)
House Mix Booth VU meter: LED 12 segments (-30dBV ÷ +20dBV)
Subharmonics output VU meter: LED 3 segments (-20dBV / 0dBV / +4dBV)
PHYSICAL
Operating temperature: -5˚C ÷ 45˚C
Operating humidity: 20 - 90% RH (no condensation).
Storage temperature: -10°C ÷ 50˚C
Storage humidity: <90% RH (no condensation)
Installation options: Desktop or rack mounting with optional accessories.
Accessories included: IEC cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm
Weight: 5.32 kg
Shipping dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm
Shipping weight: 6.74 kg

The tiny rack holds 12 MCs (upright).

width 250 mm
depth: 70 mm
height: 110 mm

color: black
material: plastic

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, with hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Replacement stylus Nagaoka G JN-03D for the pickup DJ-03HD.

Lightweight 45" bag holds about 50 of your favorite PPU singles.

This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Detachable cable (3 cables included)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Frequency Response: 15 - 28,000 Hz
• Max Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Folding/collapsible: Yes
• Weight: 10 oz (284 g) without cable/connector
• Cable - Detachable: Yes
• Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Accessories included: Screw-on 1/4” adapter, pouch

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

chateau vinyl | nylon black stealth edition

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified original cordura® nylon fabric, water-repellent

colour: black

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

chateau vinyl solo | nylon black stealth edition

chateau vinyl offers a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl.
advice to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: black

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

The 120 Trolley Record Case can be pulled anywhere easily, thus resting ones back. A comfortable telescope handle and a convenient pulling height offer maximum comfort. The show-stopper: the case can also be used without the removable trolley frame. Simply unlatch it via the easy-click system. Three manageable handles facilitate wearing transport.

FEATURES
• Classic record case with trolley frame
• Removable trolley frame
• Rolls on two wheels
• Telescope handle
• Fold-away carrying handles
• Robust construction made of coated wood
• 50/50 division
• Lockable low profile butterfly locks
• Foam padding
• Removable top
• Rotund angles
• Protective rubber feet mounted on top and bottom

TECHNICAL DATA
• Dimensions: 383 x 483 x 253 mm
• Weight: 6.4 kg
• Holds approximately 120 records

Reloop - Abdeckhaube / Dust Cover RP-7000/8000/+MK2

FEATURES
Hinged dust cover
Suitable for Reloop RP-7000/8000 MK1 and MK2
Sturdy rigid plastic cast
TECHNICAL DATA
Dimensions: 452 x 58 (75 tone arm base) x 348 mm (358 hinge seat)
Incl. mounting hinges

OFFERED IS JUST THE DUST COVER WITHOUT TURNTABLE!

2-CHANNEL BLUETOOTH DJ MIXER IN COMPACT CONSTRUCTION
The RMX-10 BT is a compact 2-channel DJ mixer, which facilitates wireless music streaming directly to the mixer via the integrated Bluetooth interface.

BUILT-IN BLUETOOTH CONNECTIVITY
This way it is possible to use a smartphone or tablet as playback source and route the signal through the mixer. The Bluetooth signal can be routed to both channels.

45 MM CROSSFADER AND TWO SMOOTH-RUNNING LINE FADERS
Moreover, the 45-mm crossfader is user-replaceable and the smooth linefaders make mixing more comfortable.

CHANNEL STRIPS WITH 3-BAND EQ AND GAIN ADJUSTMENT
Each channel has an individual gain control and 3-band EQ that raises or lower the frequencies at 100 Hz, 1 kHz and 10 kHz.

6.3 MM HEADPHONES OUTPUT & MIC INPUT
The RMX-10 BT has a 6.3-mm microphone input with separate volume adjustment, as well as a 6.3-mm headphones output with volume adjustment and cue-mix function.

ROBUST ALL-METAL CONSTRUCTION
Master output volume can be monitored via LED level chains. The space-saving and sturdy construction is made of metal.

•2-channel Bluetooth DJ mixer in compact design
•Bluetooth connectivity: wireless music streaming directly to your mixer
•Extremely space-saving and robust all-metal construction

FEATURES
•2-channel Bluetooth DJ mixer in compact construction
•Built-in Bluetooth connectivity: wireless music streaming from your smartphone/tablet directly to your mixer
•Flexible Bluetooth routing on both channels
•Replaceable 45 mm crossfader and two smooth-running line faders for mixing
•Channel strips with 3-band EQ and gain adjustment
•6.3 mm headphones output with volume control and cue mix function
•6.3 mm mic input with dedicated volume control
•Master signal LED level chains
•Extremely space-saving and robust all-metal construction

TECHNICAL DATA
•Power supply: AC 100 - 240V, 50/60 Hz
•Power consumption: 3.5W
•Frequency response: 20 Hz - 20 kHz
•Inputs: 2x Phono RCA, 2x Line RCA, Mic TS, 1x Bluetooth In
•Outputs: Master RCA, Rec RCA, headphones 6.3 mm jack
•EQ range at 100 Hz, 1 kHz, 10 kHz
•Dimensions: 180 (w) x 260 (d) x 70 (h) mm (potentiometers: 21.5 mm)
•Weight: 1.72 kg
•Accessories included: Power cord and operating instructions

In addition to the record and register boxes, Record Box has a special offer for vinyl collectors and lovers of modern furniture systems: With the highboard set consisting of 4 boxes for 12-inch records + top & baseboards, customers benefit from attractive price savings compared to purchsing the boxes separately.
The sets are particularly interesting for collectors who already have a large number of records and want to get a lot of storage space for an attractive price. The record boxes as part of this set offer space for approx. 450 12-inch records.
The highboard set is available in classic white and black, can be expanded as required and individually supplemented with other products from the Record Box furniture system to create unique pieces of furniture. Whether as a DJ rack, hi-fi furniture, room divider or record shelf - the possible uses of the highboard are almost unlimited.
The set consists of four record boxes that are placed on a baseboard. A top board forms the upper end with a smooth, straight surface.
The unique furniture system from Record Box stands for diversity, which allows vinyl collectors to realize their individual wishes for the storage and presentation of their records. Like all furniture in the Record Box System, the boxes and boards are made of high-quality MDF, which has been covered with a robust layer of melamine. Innovative adhesive dots reliably protect against slipping. A wall mounting set is available in the shop for additional security.

4 boxes for 12 inch records + top & baseboards
Technical details & components set:
• Dimensions of the furniture in total: approx. 72.3 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard small
• 4x 12-inch 110 storage boxes
• 2x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

VMN10CB
REPLACEMENT STYLUS FOR VM510CB & VM610MONO
Conical Bonded stylus
Bonded Round Shank construction
Blue

The 12" Record Case offers space for up to 100 12" records, which you can optimally transport and safely archive in this record case. The lid of the DJ record case is removable and can be used as a sorting pad during DJ'ing.

The butterfly lock protects your collection from theft. Despite its very sturdy design with parts made of aluminium, plastic-coated MDF panels and rivets, the Vinyl Record Case is pleasantly light to carry. The sturdy case handle rests on top.

Since the DJ case is covered with a foam layer on the inside, records are optimally protected against impacts. Deformations due to heat and fading due to sunlight are also reliably prevented when archiving collections in the record case.

Technical details:
• Capacity: maximum 100 12" records
• Material: aluminium, plastic-coated MDF panels
• Protective metal corners safeguard against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Removable lid and butterfly lock
• Dimensions (LxWxH): 36*36*36 cm
• Weight 4,25 kg

Middleton utilises True Stereophonic (360° sound), a unique form of multi-directional stereo sound from Marshall. Keep the music going when your phone battery is low, charge your device on the move with Middleton’s trusty power bank feature. With a rugged IP67 dust and waterproof* build, a bit of rain and dirt won’t get under its skin.

* IP67-Protected against dust and sand, and it has been tested to work for up to 30 minutes while under 1 m of water.

MIDDLETON KEY FEATURES
• Marshall signature sound
• True Stereophonic (360° sound)
• Iconic & rugged design
• 20+ hours of portable playtime
• Dust & waterproof (IP67)
• Multi-directional control knob

MARSHALL SIGNATURE SOUND
Carry the heaviest portable sound in your hand. This speaker is built with two 3/5” tweeters, two 3” woofers and two passive radiators in a quad-speaker set-up to ensure the ultimate immersive experience wherever you roam. Built-in Dynamic Loudness adjusts the tonal balance of the sound to ensure your music sounds brilliant at every volume.

TRUE STEREOPHONIC (360° SOUND)
Middleton utilises True Stereophonic, a unique form of multi-directional sound from Marshall. Experience superior spatial and binaural sound that flows around you and fills any space. Indoors or out, take your speaker anywhere you like and be immersed in your music. This is absolute 360° sound.

ICONIC & RUGGED DESIGN
Middleton is equally at home in the festival mud or on your polished sideboard thanks to its iconic yet durable design. This speaker is your lifeline on the go, with a grabbable carry strap and trusty power bank capability.

20+ HOURS OF PORTABLE PLAYTIME
Middleton keeps the music going with 20+ hours of portable playtime on a single charge. When you do need to charge, it only takes 4.5 hours to return Middleton to full power and you can quickly charge before you head out – only 20 minutes of charging gives you 2 hours of playtime. The next encore is never far away.

DUST & WATERPROOF (IP67)
This tough-as-nails speaker boasts an IP67 dust and waterproof design and can be submerged in 1 m of water for a period of up to 30 minutes. Middleton has a thick skin, so rain and dirt won’t get under it.

MULTI-DIRECTIONAL CONTROL KNOB
Middleton is simple and easy to use. Control it with the multi-directional control knob. You can play, pause, skip tracks and adjust the volume of your speaker, as well as turn it on or off.

APP COMPATIBLE
If you want a more customised sound, adjust the bass and treble on the top of the speaker, or download the dedicated Marshall Bluetooth app to control the sound wirelessly. Middleton drops you straight into your music with no fuss – just pair and play.

PRODUCT DETAILS
• PLAY TIME: 20+ HOURS
• STEREO/MONO: STEREO
• WATER RESISTANCE: IP67 DUST- AND WATERPROOF
• DIMENSIONS: 109 X 230 X 95 MM / 4.29 X 9.06 X 3.74 IN

Now NEW with changed recipe - without alcohol!

With the purchase of the DISCO-ANTISTAT MIXTURE, you have taken a decisive step towards cleaning and caring for your valuable records.

As of today, you can effortlessly clean old and heavily soiled vinyl records thoroughly and make them antistatic. Even vinyl records that have been played wet can be played back dry.

But even new vinyl records become immediately antistatic by a bath in the DISCO-ANTISTAT MIXTURE, even with sensitive measuring devices a static charge can no longer be detected.

Now also very suitable for shellac records!

Made in Germany!

Drying stand for vinyl record cleaning.

Made in Germany!

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

•Allround cartridge system with many applications
•Balanced sound, slight accentuation of the bass range
•Can also be used for scratching

The Concorde Black cartridge system offers many application possibilities and emphasises its quality as a good all-rounder. Due to the balanced sound and a slight accentuation on the bass range, the system is often used in clubs. Thanks to its special spherical stylus, the vinyl wear is rather low. The cartridge system can also be used for scratching.

FEATURES
•Allround cartridge system with many applications
•Special spherical stylus
•Balanced sound, slight accentuation of the bass range
•Can also be used for scratching
•Low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 5 mV
•Tracking force range: 3 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

The Reloop Knobs bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple caps are a great addition to your set-up. Supplied in packs of 8, they're also perfectly complemented by Reloop's new Fader Caps. Customise your gear and stand out from the crowd.

FEATURES
• 8 knob caps
• Suitable for all potentiometers with d-shaft
• Rubber coating for tight grip
• Ergonomic knob cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 20 g (packaging unit)
• Dimensions: 7 x 12 x 7 mm

The Vinyl Set Holder Smart for up to 25 7 inch records is equipped with a purist design and an especially lightweight construction – ideal for installation on the wall in the living room, home studio or record store.

Glorious Vinyl Set Holder Smart 7" - Technical Data:

• Dimensions: 218 mm x 150 mm x 64 mm (L x H x W)
• Weight: 80 g

Glorious Vinyl Set Holder Smart 7" - Features:

• Holds up to 25 vinyls in the 7''-format
• Especially light and stable construction made of metal
• Easy assembly on the wall, incl. fixing accessories
• Supplied without decoration (7''-records)

Phono preamplifier

Phono Box E: Pure vinyl listening pleasure at an absolute bargain price!

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.

Features:
• Amplification and RIAA equalisation for MM cartridges
• Design principle inspired by Dr. Sykora
• SMD circuitry
• Special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black casing

Technical Specifications:
• Input impedance: 47 kohms
• Input capacitance: 120 pF
• Gain: 40 dB
• Output voltage(typically): 500mV/ 1kHz at 5mV/1kHz
• Noise floor: 88 dB (A weighted)
• THD: <0,05%
• RIAA deviation: deviation max. 0.5 dB/ 20 Hz - 20 kHz
• Input: 1 pair RCA socket
• Output: 1 pair RCA socket
• Outboard power supply: 18 V/500 mA DC; 220 - 240 V, 50 Hz
• Standby power consumption: < 1 watt
• Power consumption: 20 mA DC
• Dimension W x H x D (D with sockets): 120 x 32 x 100 (106) mm
• Weight: 269 g without power supply

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

ATH-PRO5X DJ Headphones - Over-ear style delivers exceptional isolation and long-wearing comfort, Maximum input power of 1,500mW enables operation at higher volume levels and Newly developed 40mm drivers reproduce extended frequency response.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 35,000 Hz
• Maximum Input Power: 1,500 mW
• Sensitivity: 100 dB/mW
• Impedance: 34 ohms
• Weight: 250 g (without cable and connector)
• Cable: -Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable
• Cable: -Detachable 1.2 m (3.9') straight cable
• Accessories Included: 6.3 mm (1/4") screw-on adapter

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offers a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned, removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: water-repellent cotton
colour: black

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com