DJ Equipment Sale 27 Items

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.

SPECIAL FEATURES
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

TD 201 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT3600)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 3.5g +/–0.5g
• Cartridge Weight 5g +/–0.5g
• Head-shell Weight 10g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 121 x 360 mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/201/TD201-User-Guide.pdf

RELOOP FLUX - 6X6 IN/OUT USB-C DVS INTERFACE FOR SERATO DJ PRO

We are excited to introduce the Reloop Flux: A next-generation 6x6 In/out USB-C DVS Interface for Serato DJ Pro. It can transform any conventional mixer into a professional digital vinyl system.

BACK TO THE MUSIC
The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

MAXIMUM FLEXIBILITY
Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato DJ Pro´s internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

FULL CONTROL
The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

HUB INSIDE
The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

STUDIO QUALITY – ANYTIME, ANYWHERE
The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it’s a superior DVS interface which could also be used as an audio interface in the studio.

ALWAYS POWERED
The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

ROBUST AND ROADWORTHY
The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

PLUG & PLAY FOR SERATO DJ Pro
The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

FEATURES:
• 3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96kHz with high-quality D/A converters for superior audio processing
• Also functions as a stand-alone studio interface for recording and playback audio
• 3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• 3x line outputs, including AUX-Out, assignable to the Sampler
• Easy, accessible direct thru buttons for analogue deck playback
• All terminals are visible from the top of the unit for easy installation in dark surroundings
• Bus-powered cable connection for power and audio
• Optional USB-C DC in port for external power supply
• Power delivery support for USB-C devices (max 60W)
• Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
• Power LEDs on the top panel for connection status (Hub, PD, DC)
• 2-port USB-A hub for connecting further accessories
• Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
• Highly robust, extended edge design to protect connection terminals
• Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
• Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

TECHNICAL DATA:
Power:
• USB bus powered: Yes
• Recommended power: 2 A or higher / minimum power: 400 mA
• Maximum USB-PD throughput: 60 W
• Maximum USB Hub power output: 2 x 0.8 A = 8 W
• Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
• Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
• S/N Ratio (output reference level 1 kHz, +4 dB):
• Deck In (LINE signal input: 0 dBV): More than 83 dB
• Deck In (PHONO signal input: -32 dBV): More than 73 dB
• THD + N:
• LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
• PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)

Maximum Gain:
• Deck In (LINE): +4 dB ± 2 dB
• Deck In (PHONO): +36 dB ± 2 dB
• Maximum Input (1 kHz, THD=1%):
• Deck In (LINE): More than +7 dBV
• Deck In (PHONO): More than -25 dBV
• Maximum Output (1 kHz, THD=1%):
• Deck Output: More than +11 dBV

USB:
• USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
• USB 2.0 high-speed (480 Mbit/s)
• Class-compliant on macOS
• USB Power Delivery Protocol 3.0

General:
• Dimensions (WxDxH): 160 x 120 x 34 mm
• Weight: 0.85 kg

Accessories:
• User Manual
• 1x USB type C/C cable
• 1x USB type C/A cable
• 2x RCA cables

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/5/245389_Reloop_IM.pdf

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

supplied in Flight case

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. The HHV x UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the HHV x UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The HHV x UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This HHV x UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition) - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

The VS-Box 1/45 is a vinyl storage box which can be attached to the wall for your convenience. It can be fastened very easily and ensures your favourite records are always at hand. It can be combined with other boxes of the same kind for efficient storage layout. The puristic design fits in every living room and ensures that the furniture is both practical and decorative.

Features

Capacity: 40-50 LPs
Designed for mounting on the wall
Material: medium density fibreboard with laminated decor
Ageless design
High-grade workmanship
Technical Data

Dimensions: 360x170x190 mm
Weight: 2,7 kg

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

The model Wall of the new Zomo VS Rack-series by Zomo is a new and groundbreaking option for vinyl storage. The robust yet lightweight construction made from powder-coated metal combines longevity and elegant design.
The product is designed for wall-mount but it can also be detached from the wall-fitting for transport.

Specifications

Measurements: 256 x 120 x 340 mm
Weight: 0,5 Kg
Capacity: 20-30 LPs

LABEL PROTECTION FOR SINGLE RECORDS

Protective device for cleaning EP records with liquids.

Prevent your singles label from getting wet when cleaning the record. A single adapter is of course included in the scope of delivery. Handling is improved with the large handle.

• package contents: Protector case Rubber gasket x2 Rubber blade x2 Adapter for single shot x1
• weight of the case: approx. 137g
• packaging weight: approx. 220g
• pack size: 122x172x50m

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" Orange).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on STOKYO Thin Press©️ Orange 12" Vinyl

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

The Zomo Divider is an optional accessory for the Zomo-VS-Boxes and the deckstand Vegas. It can be used to divide the LP-compartments into four sub compartments for cds and dvds.

Features:
• Extension of the Zomo VS-Boxes series with CD and DVD compartments
• Capacity: 40 - 80 CDs or 20 CDs + 20 DVDs
• Material: MDF wood fibreboard
• Unique design
• High-quality workmanship
• Great optics

Specifications:
• Dimensions: 329 x 319 x 339 mm
• Weight: 3 kg

Suitable for the following Zomo products:
• Zomo Deck Stand Vegas
• Zomo VS-Box 100
• Zomo VS-Box 100/2
• Zomo VS-Box 100/4
• Zomo VS-Box 200
• Zomo VS-Box 200/2
• Zomo VS-Box 400

Format:
• 7" Singles
• CDs
• LPs

Spare parts package for the record washers Generation II + Generation II PLUS.

• 1 sealing shell incl. crank axle *NEW* with 105mm diameter *NEW*
• 2 sealing rings
• 2 spare brushes
• 2 screws for axle holder
• 2 axle holders
• 1 set of non-slip rubber feet

Also suitable as upgrade from Generation II to II PLUS!

Made in Germany!