Cartridges & Styluses 112 Items

Stylus for Goldring E4 MM Cartridge

Just needle, not the complete cartridge included!

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

This small level gauge is a great aid in accurately checking and setting the cartridge VTA and Azimuth.
Weight: 0,64 g

Level Gauge - Stainless steel
High precision gauge, calibrated.

Level Gauge - Basic
High precision gauge, calibrated.

Clearaudio’s V2 MM technology uses ebony as a resonanceresistant body. Other ingredients of the recipe for success are the most effective reduction of moving mass, an optimised polishing technique for the stylus and highly effective cartridge damping. This is precision engineering in the pursuit of the best sound.

The Clearaudio V2 moving magnet cartridges are meticulously measured, analysed, and hand-selected into four Performance levels. In this way Clearaudio achieves the best stereo channel
matching, minimum phase error and distortion, flattest frequency response and highest dynamic range at each price point. The cartridges produce an audiophile sound of superlative quality – spatially detailed and vividly textured, with bass that does not wallow and treble that is not harsh.

The models of the Clearaudio MM V2 series provide outstanding sound quality on all current tonearms. With the exception of the MM V2 Concept, which is made of aluminium, all the cartridges in this series are made with housings of hand-polished ebony – the key to record-breaking weight values. The Performer V2 weighs just 7.4 grams, the Artist V2 8.4 grams. This is what Clearaudio calls ‘effective reduction of the moving mass’.

FEATURES
Technical Specifications:
• TOTAL MASS 8.6g (± 0.2g)
• FREQUENCY RESPONSE 20Hz - 20kHz
• OUTPUT VOLTAGE (1KHZ, 5CM/S) ~ 3.3mV
• CHANNEL SEPARATION (1KHZ) 20dB
• CHANNEL BALANCE (1KHZ) 2dB
• TRACKING ABILITY 80μm
• RECOMMENDED TRACKING FORCE 2.2g ± 0.3g
• COIL IMPEDANCE (1KHZ) 0.66kΩ
• COIL INDUCTANCE 400mH
• LOAD RESISTANCE 47kΩ
• LOAD CAPACITANCE 100pF
• CANTILEVER / STYLUS SHAPE Aluminium / elliptical
• COMPLIANCE 15μ/mN
• CARTRIDGE BODY Aluminium
• MANUFACTURER’S WARRANTY 2 years

Manual: https://clearaudio.de/_assets/_pdf/manuals/cartridges/CA_MM%20V2_E+D.pdf?d=1653493472

ATN-XP3
Replacement Stylus for AT-XP3
Conical Bonded Stylus
Carbon fibre-reinforced ABS cantilever
Durable design for DJ application

AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf