All Items 24116 Items

Ultimate Flight Case Set Turntable & 10/12 Inch Mixer Plus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-12-12

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

Go to Item

UDG

419,99 €*

Brilliant Adventure (1992-2001)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide silver finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. This flight case also feature built-in corner wheels on one side for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Set Multi Format Turntable Battle & 10"/12" Mixer Black Plus (Laptop Shelf + Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

EAN 8718969212397
Color Black
Weight 20,50 kg / 45.1 lbs
Outer Dimensions (W x H x D) 120.4 x 52.6 x 23 cm | 47.4 x 20.7 x 9 inch
Inner Dimensions (W x H x D) Turntable compartment: 38.7 x 45.4 x 7.5 cm | 15.2 x 17.9 x 2.9 inch
Mixer compartment: 33.4 x 48.4 x 7.6 cm | 13.1 x 19.1 x 3 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Sturdy construction
Full padded interior keeps controller well-protected
High density diamond embossed EVA foam protective padding
Extra's Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
Removable case lid
Adjustable laptop shelf
Built-in corner wheels for convenient transport
Fits 2x any turntable:
Technics SL-1200MK7, SL-1210 MK2
Reloop RP-8000MK2, RP-7000, RP-6000 RP-2000
Denon VL12 Prime
Pioneer PLX-1000
Stanton ST-150
Vestax PDX 3000
Numark TTX
Audio Technica LP120-USB/ LP1240-USB
American Audio Power Drive 2.2 etc.
or similar size turntables

+ 1x any 10" & 12" mixer:
Reloop Elite
Denon DJ X1800 Prime
Pioneer DJM-S9, DJM-909, DJM-707
Rane Seventy Two, Sixty Two, Sixty One, MP-2014, TTM57 MK2, TTM57 SL
NI Kontrol Z2
Thud Ruble TRX
Mixars Quattro, Duo
Vestax PMC 05 Pro4, PMC 07
or similar size mixers

Go to Item

David Bowie

Box | 2021 | EU | Original (Parlophone)

431,99 €*

| 2021 | UK | Reissue (Anjunabeats)

Release: 2021 / EU – Original

Genre: Pop

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

18LPs.

Go to Item

Above & Beyond

2000 - 2020

499,99 €*

Release: 2021 / UK – Reissue

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Used Vinyl

Medium: Mint, Cover: Sealed

TD 202

549,00 €*

Talk Is Cheap Super Deluxe Box Set

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

SPECIAL FEATURES
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT-95E)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 2.0g +/–0.5g
• Cartridge Weight 5.7g +/–0.5g
• Head-shell Weight 11g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 355x 121mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/202/TD202-User-Guide.pdf

Go to Item

Keith Richards

Box | 2019 | EU | Original (BMG Rights Management)

553,99 €*

Release: 2019 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Kleeny

MK2

655,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Kleeny MK2 Premium Record Cleaning machine

Made and engineered in Germany from experienced designers and technicans. This are the features:
• Beautifully designed, very compact housing that takes up little space
• Housing sides made of aluminum with leather-look covering
• Low operating noise thanks to noise insulation
• Silicone feet provide a secure grip and minimize structure-borne noise
• Adapter for dry vacuuming singles and 10 inch LPs included
• Robust traditional switches
• Ergonomic puck (record weight) with magnetic fixation - no screwing or clamping!
• Label protection by rubber lip
• Powerful, reliable platter motor rotates clockwise and counterclockwise
• Plate mandrel made of polished stainless steel
• Suction turbine with 250W power - does the drying in 2 revolutions!
• Platter mat made of soft, antistatic rubber
• Internal dirty water tank with drain spout, easy to empty. No hose or clamp required.
• Dry blow function protects against residual moisture and musty odor.
• Suction arm holder made of CNC milled aluminum
• Easy swinging in and out of the suction arm without screws
• Classic switch design

The robust switches could also be found in a classic sports car. The gear motor is switched on with the left switch. During washing, the direction of rotation should be changed several times by flipping the switch. The right-hand switch switches on the powerful suction turbine. It only needs 2 revolutions of the turntable and the record is dry. A high-quality record brush is part of the delivery programme.The unit can be emptied easily with the help of an outlet spout.

Secure protection for the label
The beautifully shaped puck has a sealing lip on its underside that protects the label from moisture penetration all around. Powerful magnets pull the puck onto the record. So nothing needs to be clamped or screwed. It couldn't be simpler.

Washing with premium brush attached by one click
The DRAABE Premium brush is included in the delivery. With Kleeny MK2 you don't need to hold the brush in your hand. It is simply clicked onto the wash arm. It adapts to the slight unevenness of the surface because it is suspended so that it can move. When the washing process is finished, you simply remove the brush and switch on the suction. It couldn't be simpler!

Scope of delivery - gets you ready to wash!
• Unit including, clamp, suction arm and platter mat
• Kleeny Service station with adapters for Singles and 10 Inch LPs
• Housing in noble leather look colour: bordeaux
• 200 ml Nessie cleaning lotion - ready to use, in suirt bottle for cleaning up to 40 records
• Premium record brush with click technology
• Connection cable with Euro, Swiss or UK Plug
• Manual in English language

Technical data:
• Dimensions without turntable: 280 mm x 145 mm x 230 mm
• Weight : 2,7 kg
• Power consumption "Suction" : 250 W
• Power consumption "Washing" : 12 W
• Power consumption "Stand by" : 0 W
• Diameter of turntable : 24.5 cm
• Dimensions with attached turntable : 375 mm x 245 mm x 230 mm
• Electr. connection IEC cable with plug (Euro, Swiss, UK depending of your country)
• Electr. voltage : 230V / 50Hz.
• Extraction noise : 62 db(A)

Go to Item

TD 102 A

659,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics

SL-1200 MK7

989,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1200MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model.

Go to Item

Elac

Miracord 60

999,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

LP | 2021 | Original (Tape Modern)

Duran Duran

Future Past

999,99 €*

Release: 2021 / Original

Genre: Electronic & Dance, Pop

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Used Vinyl

Medium: Near Mint, Cover: Generic

Test Pressing signed by all 4 members. Great condition and super rare. Limited to 100 copies 5/100

Go to Item

TD 403 DD

1.399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

Go to Item

TD 403 DD

1.399,00 €*

DF-1i A Schallplattenbügler (record flattener)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Orb

1.399,00 €*

Amano Plattenwaschmaschine

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Go to Item

Levar

1.490,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

DF-1i A Plus Schallplattenbügler (record flattener)

Orb

1.699,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Go to Item

TD 1500

1.999,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Unica Plattenwaschmaschine

Levar

2.290,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

TD 1600

2.799,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

flat.2 Vinyl-Plattenbügler (record flattener)

AFI

3.849,00 €*