All Items 5421 Items

"DJs Are The New Rockstars" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Flight Case CC Twin MkII

24,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Flight case for Ortofon Concorde MkII

Go to Item

GT Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Go to Item

"In ViNyL We Trust" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome 3D design
The VNL 3D design is developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

The slipmat design uses several elements linked to the DJ culture:
• Scissors stand for "Cutting sounds"
• Equalizer levels picture refers to the mixers' levels
• Spiral symbolises turntable platter when spinning

The effect of animation is fully obtainable when the pitch is set to 33 +8.

Go to Item

LH-2000 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Go to Item

LH-4000 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

Go to Item

Night Club MKII E/E Ersatznadel

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM 5E

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

OM 5S

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

OM PRO S x SH-4 Headshell Black

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Pro S pre-mounted on SH-4 Black
The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

OM Pro S technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 5 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5,0 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g
Replacement stylus unit - Pro S

Go to Item

OM Qbert x SH-4 Headshell Black Printed

139,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Q.Bert pre-mounted on SH-4 Black headshell
The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Ultra high output
• Low wear characteristics

Tailored specifically for scratch, the OM Q.Bert provides unrivaled tracking ability and sonic characteristics.

Technical Data:
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Go to Item

Pro S Stylus

35,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Entry-level cartridge for all-purpose use

New DJ? This entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

Go to Item

Q-Bert Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by DJ Q.Bert for scratch and back-cueing. High tracking ability. Ultra high output

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own.

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Output voltage at 1000Hz, 5cm/sec.
11 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
•
Frequency range at -3dB
20-18.000 Hz
Frequency response
20-18.000 Hz -3 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.680 Ohm
Internal inductance
920 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-400 pF
Cartridge weight
18,5 g

Go to Item

Record Brush

29,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

The Ortofon Record Brush is designed by the Danish Industrial designer Møller Jensen Innovation and Design – the same company who designed the award winning vintage MC Jubilee cartridge, historical Kontrapunkt Series, 2M Series and the Concorde MkII range.

Cleaning your records before every use increases the lifetime of the diamond and improves your listening experience. The Ortofon Record brush safely and effectively removes dust and dirt from the record surface without scratching. • The brush features two rows of tightly bound carbon fiber bristles that are designed to remove dirt and dust from the record surface. Simply brush around the surface of a record after placing it on the turntable.
• Simple and robust two parts design: Injection moulded part uses a conductive plastic preventing any static charges. Shield used to clean and protect the brush.
• Easy to use: slides and locks into place.
• Embossed details for clarity and performance.
• Lanyard hole for convenience and store.

Go to Item

Record Stabilizer

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Go to Item

Record Stabilizer Heavy

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Record Stabilizer Heavy - Black - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Go to Item

SH-4 Headshell

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

Go to Item

"Smash The Club" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Stylus 14

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Go to Item

Stylus 20

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 25 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H
*) Typical value

Go to Item

Stylus 3E

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Go to Item

Stylus 510 MK II

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Go to Item

Stylus 5S

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Go to Item

Stylus 7

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Go to Item

Stylus 78

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Go to Item

Stylus Brush Fibre

15,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon fibre brush for cleaning the stylus
For cleaning the stylus, use fiber brush a few times along the cantilever in the direction of the stylus, whenever you play a new record or change sides.

Go to Item

Stylus D 25 M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Go to Item

Stylus Guard for 2M Series (1 Stück)

2,54 €* 2,99 € -15%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Guard for VNL

7,42 €* 9,90 € -25%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Styli protection caps for VNL cartridges and styli

The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.

The protection caps come in pairs.

Go to Item

Super OM 5E

85,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Go to Item

VNL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL Premounted x SH-4 Headshell Black

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\\ Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\ Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \ Stylus

35,10 €* 39,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

"What Is A DJ If He Can't SCRATCH" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Black Imperial Crown Snapback Cap

19,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Outkast Imperial Crown Snapback Cap is an adjustable hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by the Outkast merch department.

Outkast Imperial Crown Snapback Cap - Features:

• high rise 6-panel construction
• Outkast Imperial Crown embroidery on front
• tonal eyelet stitching
• 7 eye snapback plastic closure at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% acrylic

Go to Item

Blue Box T-Shirt

19,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OutKast Blue Box Tee is equipped with the following features:
• rib crew neck with interior tape
• Blue Box artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Stankonia T-Shirt

18,99 €* 19,99 € -5%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Outkast Stankonia T-Shirt's features include:

• rib crew neck
• Stankonia artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

White Imperial Crown Snapback Cap

19,99 €*

The Hidden Step Black Vinyl Edition

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Ozric Tentacles

LP | 2023 | EU | Original (Kscope)

30,99 €*

Release: 2023 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ozzy Osbourne

Skull & Wings Bandana

12,34 €* 12,99 € -5%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ozzy Osbourne Skull & Wings Bandana is equipped with printed S&W artwork as well as branding details. Measures: approx. 53 x 53 cm. 100% cotton.

Go to Item

Pacific Rhythm

Outer Gardens T-Shirt

39,99 €*

Reset Black Vinyl Edition

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pacific Rhythm Outer Gardens T-Shirt - Features:
• rib crew neck with interior tape
• deep.gnome's Outer Gardens artwork screen-printed by Proper Design in Vancouver, BC on front
• regular fit
• 100% cotton shrink-free single jersey, 6.5 oz (garment dyed; made in USA)

Go to Item

Panda Bear & Sonic Boom

LP | 2022 | EU | Original (Domino)

25,99 €*

Release: 2022 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Papa Roach

Classic Logo T-Shirt

23,74 €* 24,99 € -5%

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Papa Roach Classic Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Papa Roach Classic Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Alta Down Jacket

674,95 €*

Available Sizes: L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Designed to keep you as warm during the cold season, the Alta Down Jacket by Parel Studios provides unrelenting insulation without compromising on weight. The Parel Studios Alta Down Jacket is equipped with fleece-lined hand warmer pockets, a zip pocket on left arm sleeve as well as a chest pocket to keep your stuff organized. Additional features include interior mesh pockets, an adjustable hood, a water-repellent 2-way front zipper plus hidden windguard cuffs, all of which assist in creating an impenetrable barrier against imposing weather.

Parel Studios Alta Down Jacket - features:

• high-necked, drawstring-adjustable hood with visor
• water-repellent 2-way front zipper with custom pulls
• Parel Studios branding at left front
• 2 fleece-lined handwarmer pockets with zip closure at lower front
• elastic bottom hem
• patch pocket with zip closure on left sleeve
• hidden stretch cuffs
• interior mesh pockets
• 600 Down Fill+ branding on right sleeve
• regular fit
• shell: 100% nylon with water-repellent DWR finish
• lining: 100% nylon
• pocket lining: 100% polyester fleece
• insulation: 90% down, 10% feathers (600 fill power)

Go to Item

Atlas Vest

195,45 €* 229,95 € -15%

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Parel Studios Atlas Vest - features:
• stand-up collar
• 2-way metal front zipper
• 2 pockets with zip closure at lower front
• additional side entry compartments at bottom's cargo pockets
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• stretch bordering at arm openings
• breathable mesh back panel
• zip pocket at the rear
• Parel Studios branding printed on left front and on the rear
• regular fit
• shell: 4-way stretch rip-stop made from 100% polyester
• lining: 100% polyester mesh

Go to Item

BP Tee

74,95 €*

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios BP Tee is equipped with the following features:
• rib crew neck with interior tape
• Parel Studios branding printed on left chest and upper rear
• relaxed fit
• 100% organic cotton single jersey
• made in Portugal

Go to Item

Cana Jacket

349,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Cana Jacket combines everyday functionality with advanced PrimaLoft® Cross Core™ insulation, initially developed for NASA, ensuring warmth in a timeless silhouette. The Parel Studios Cana Jacket is equipped with a chest pocket and two side pockets for essentials, while elastic cords at the waist and elastic bindings at the cuffs adjust for comfort. Reflective Parel Studios logos on the front and back enhance visibility, making it the perfect choice for both day and night.

Parel Studios Cana Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• 2-way front zipper with custom pulls and interior storm flap
• left chest pocket with zip closure
• 2 pockets with zip closure at lower front
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• stretch cuffs
• reflective Parel Studios logos printed at lower left front and upper back
• relaxed fit
• 88% nylon, 12% spandex

Go to Item

Legan Pants

174,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Legan Pants are equipped with the following features:
• elastic, drawstring-adjustable waistband with sturdy eyelets and aglets at the draw cord
• 2 side-entry front pockets wit tonal zip closure
• reflective Parel Studios logo printed on left leg
• relaxed fit, straight legs
• updated two-layer insulated stretch fabric for added warmth and comfort, made from 100% polyester

Go to Item

Legan Pants

96,22 €* 174,95 € -45%

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Legan Pants are equipped with the following features:
• elastic, drawstring-adjustable waistband with sturdy eyelets and aglets at the draw cord
• 2 side-entry front pockets wit tonal zip closure
• reflective Parel Studios logo printed on left leg
• relaxed fit
• lightweight stretch fabric made from 100% polyester

Go to Item

Lokka Bag M

124,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Lokka Bag M by Parel Studios is the ultimate everyday essential, boasting the mid size format of the Lokka range. This padded Parel Studios bag is equipped with two main compartments with zip closure, at zip compartment at the front as well as two mesh side pockets; it's perfectly accommodating laptops up to 14 inches within its dedicated reinforced laptop compartment. The Parel Studios Lokka Bag's features also include an adjustable shoulder strap for easy carrying. Dimensions: approx. 31 x 25 x 11 cm; 100% polyester.

Go to Item

Lokka Bag S

89,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Lokka Bag S by Parel Studios is the essential everyday accessory, offering versatility as both a cross-body and waist bag. As the smallest in the Lokka lineup, the Parel Studios Lokka Bag S is a padded construction equipped with two zip compartments for secure storage as well as a mesh pocket on the rear for easy access. With an adjustable and detachable strap, the Parel Studios Lokka Bag S adapts seamlessly to your daily needs, blending functionality with compact design. 100% polyester.

Go to Item

Nova Beanie

74,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

No fall/winter season without an essential beanie - a universally recognized cold-weather staple. Made from a custom blend of merino wool and acrylic, the Nova Beanie by Parel Studios offers superior warmth and softness. This Parel Studios Beanie is equipped with a prominent logo in a stylish Jacquard knit. Its improved fit ensures both comfort and style for any cold day. 70% acrylic, 30% wool knit yarn; made in Portugal.

Go to Item

Sarez Overshirt

249,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sarez Overshirt by Parel Studios is a versatile and durable addition to any wardrobe. Made from sturdy rip-stop fabric, the Parel Studios Sarez Overshirt is equipped with a two-way front zipper including branded pulls as well as tonal logo embroidery at mid left front. With two flap pockets at chest, two side-entry zip pockets at lower front, and snap buttons at the cuffs, the Parel Studios Sarez Overshirt offers ample storage and a secure fit while the mesh lining ensures breathability and comfort. Relaxed fit; shell: 100% polyester rip-stop fabric; lining: 100% polyester mesh.

Go to Item

Senja Jacket

399,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Senja Jacket combines high-performance with practical design to keep you dry and comfortable in all conditions. The Parel Studios Senja Jacket is equipped with a waterproof membrane and taped seams, integrated into a 3-layer fabric. Adjustability is key, with a hood, hook and loop fasteners at cuffs, and drawstrings at the waist and hood for a perfect fit.

Parel Studios Senja Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• waterproof 2-wa front zipper with custom pulls and interior storm flap
• 2 front pockets with zip closure
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• adjustable straps with hook and loop fasteners at cuffs
• tape-sealed seams
• reflective Parel Studios logo printed on left chest
• relaxed fit
• shell: 100% nylon 3L softshell fabric
• lining: 100% polyester laminate

Go to Item

Sport Cap

74,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For ages, a headgear item like the Parel Studios Sport five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Parel Studios Sport Cap is equipped with the following features:

• Parel branding printed on front panel
• tonal eyelet stitching at vent holes
• slightly curved visor
• adjustable nylon strap with front-release buckle plus Parel woven flag label at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 4-way stretch rip-stop fabric made from 88% nylon, 12% spandex

Go to Item

Vinson Pants

99,97 €* 199,95 € -50%

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Vinson Pants are equipped with the following features:
• color-blocked cut and sew construction
• elastic, drawstring-adjustable waistband with sturdy eyelets and aglets at the draw cord
• 2 side-entry front pockets
• 2 zip pockets at the sides of the thighs
• 2 back pockets with zip closure
• mesh-lined side zippers at leg openings
• Parel Studios logo printed at upper left side
• relaxed fit, slightly tapered legs
• 4-way stretch rip-stop made from 88% nylon, 12% spandex

Go to Item

'73 Skyline Uprisal Hoody

99,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia '73 Skyline Uprisal Hoody is a classic hooded sweater design made from brushed, recycled fleece.

The Patagonia '73 Skyline Uprisal Hoody's features include:

• drawstring-adjustable two-layer hood with metal eyelets
• Patagonia '73 Skyline label at left chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• Patagonia's Fitz Roy Icon patch on right sleeve
• Patagonia woven flag label at left side seam
• relaxed fit
• 55% recycled polyester, 45% recycled cotton brush-back fleece, 390 g/m²
• Fair Trade Certified™ sewn

Go to Item

Airshed Cap

39,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Airshed Cap is an adjustable strapback hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by Patagonia.

Patagonia Airshed Cap - features:

• mid rise 6-panel construction
• Patagonia woven label on front
• tonal eyelet stitching
• pre-curved visor
• adjustable strap with hook and loop fastener at the rear
• interior includes plain taping and a moisture-absorbing, lightweight, low-profile sweatband made from 100% recycled Capilene® Cool Trail fabric for moisture and temperature management with built-in HeiQ® Fresh durable odor control
• cationic-dyed elastic 30-denier rip-stop made of 100% recycled polyester, 54 g/m², with PCF-free DWR impregnation without perfluorinated chemicals
• visor: NetPlus™ made of 100% recycled fishnets
• sweatband: double-knit material made from 100% recycled polyester, 78 g/m², with miDori® bioSoft impregnation for optimum moisture wicking and softness as well as HeiQ® Mint odor inhibitor
• Fair Trade Certified™ sewn
• weight: 68 g

Go to Item

Airshed Visor

34,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Airshed Visor is an adjustable design that's on par with all the big players' stuff - a high-quality headwear piece single-handedly produced by Patagonia.

Patagonia Airshed Visor - features:

• Patagonia woven label on front
• pre-curved visor
• adjustable, elastic strap
• cationic-dyed elastic 30-denier rip-stop made of 100% recycled polyester, 54 g/m², with PCF-free DWR impregnation without perfluorinated chemicals
• visor: NetPlus™ made of 100% recycled fishnets
• sweatband: double-knit material made from 100% recycled polyester, 78 g/m², with miDori® bioSoft impregnation for optimum moisture wicking and softness as well as HeiQ® Mint odor inhibitor
• Fair Trade Certified™ sewn
• weight: 48 g

Go to Item

Altvia Pack 28L

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Altvia backpack accompanies you day trips or even longer trips, if an overnight stay is necessary. This 28-liter backpack by Patagonia has highly breathable material on the back padding and shoulder straps, a front-accessible storage pocket and a lid that can be closed in the style of a duffel bag with a cord. In addition, the Patagonia Altvia Pack 28L is made of durable as well as recycled nylon fabric.

Patagonia Altvia Pack 28L - features/specifications:

• lid with nylon webbing including side-release buckle
• comfortable shoulder and hip straps with extremely air-permeable Regulator® Airmesh
• air circulation promoting and condensation preventing back padding for lasting comfort
• variable hip belt with accessory pockets
• suitable for a hydration system
• lid and inner pocket have secure zip closure
• rain cover included
• weight: approx. 797 g
• dimensions: approx. 29 x 58.5 x 26.5 cm
• M = 41 - 48 cm (body) / 66 - 119 cm (waist)
• L = 46 - 53 cm (body) / 71 - 124 cm (waist)
• capacity: 28 liters
• exterior fabric: 140D rip-stop fabric made of 100% recycled nylon, 136 g/m²
• bottom: 210D rip-stop fabric made of 100% recycled nylon, 139 g/m²
• rain cover: 100% recycled polyester taffeta, 75 g/m²
• pack sack, floor and rain cover are equipped with PU coating and a PFC-free DWR impregnation
• back padding and shoulder straps: 100% polyester mesh, 149 g/m²
• pockets: Mesh made of 66% nylon, 34% elastane, 319 g/m²
• lining: 200D fabric made of 100% recycled polyester, 102 g/m², with PU coating
• frame: Layered foam frame sheet

Go to Item

Baggies Jacket

159,95 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Baggies design, Patagonia seamlessly blends the silhouette of a classic harrington jacket with functional features such as a DWR-finished nylon shell that offers protection against rain and winds. Plus, the NetPlus® nylon faille of the Patagonia Baggies Jacket is bluesign™-certified and made from post-consumer nylon while the mesh lining consists of recyceld poly fibers.

The Patagonia Baggies Jacket is equipped with the following features:

• turn-down collar
• tonal metal front zipper with custom pull
• raglan sleeves
• 2 pockets with tonal zip closure at lower front
• stretch hemlines cuffs and body
• contrast mesh lining
• Patagonia label at left chest
• weight: approx. 456 g in size M
• shell: bluesign™-certified 100% recycled nylon NetPlus® faille with PFC-free DWR (Durable Water Repellant) finish and 50+ UPF UV protection, 142 g/m²
• lining: 100% recycled polyester mesh, 129 g/m²
• Fair Trade Certified™

Go to Item

Baggies Jacket

159,95 €*

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Baggies design, Patagonia seamlessly blends the silhouette of a classic harrington jacket with functional features such as a DWR-finished nylon shell that offers protection against rain and winds. Plus, the NetPlus® nylon faille of the Patagonia Baggies Jacket is bluesign™-certified and made 65% from post-consumer nylon while the mesh lining consists of recycled poly fibers.

The Patagonia Baggies Jacket is equipped with the following features:

• turn-down collar
• tonal metal front zipper with custom pull
• raglan sleeves
• 2 pockets with tonal zip closure at lower front
• stretch hemlines cuffs and body
• contrast mesh lining
• Patagonia label at left chest
• weight: approx. 456 g in size M
• shell: bluesign™-certified 95% nylon (65% recycled), 5% spandex plain weave faille with PFC-free DWR (Durable Water Repellant) finish, 190 g/m²
• lining: bluesign™-certified 100% recycled polyester mesh, 129 g/m²
• Fair Trade Certified™

Go to Item

Baggies Lights

Available Sizes: S, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Lights are the slimmer brother of the regular Baggies, made from lightweight NetPlus® fabric, equipped with mesh lining.

The Patagonia Baggies Lights are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• Patagonia woven label at lower left leg
• regular fit
• 16.5 cm inseam
• weight: approx. 173 g
• shell: bluesign® approved weave made from 95% nylon (65% recycled), 5% elastane, 142 g/m², with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals)
• lining: 100% polyester mesh

Go to Item

Baggies Lights

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Lights are the slimmer brother of the regular Baggies, made from lightweight NetPlus® fabric, equipped with mesh lining.

The Patagonia Baggies Lights are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• Patagonia woven label at lower left leg
• regular fit
• 17 cm inseam
• weight: approx. 173 g
• shell: NetPlus® 96% post-consumer recycled nylon faille (made from recycled fishing nets to help reduce ocean plastic pollution), 4% elastane, 149 g/m², with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals)
• lining: 100% polyester mesh

Go to Item

Baggies Lights

44,95 €* 49,95 € -10%

Available Sizes: M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Lights are the slimmer brother of the regular Baggies, made from super-lightweight rip-stop fabric, equipped with mesh lining.

The Patagonia Baggies Lights are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• Patagonia woven label at left leg
• regular fit
• 6.5 inch inseam
• weight: approx. 145 g
• shell: bluesign™-certified 100% recycled polyester 50D rip-stop with DWR (Durable Water Repellent) finish and 40 UPF UV protection, 105 g/m²
• lining: 100% polyester mesh

Go to Item

Baggies Shorts

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Shorts are the longer brother of the regular Baggies, made from lightweight recycled nylon fabric, equipped with mesh lining and a slightly higher waistline.

The Patagonia Baggies Shorts are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• flap pocket with snap button closure at wearer's right rear
• Patagonia woven label at left leg
• regular fit
• 5 inch (12.7 cm) inseam
• weight: approx. 204 g
• shell: 100% recycled nylon weave with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals), 153 g/m²
• lining: 100% polyester mesh
• fabrics are certified as bluesign® approved
• Fair Trade Certified™ sewn

Go to Item

Bandana

19,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Bandana is the best way to mask before you do a drive-by shooting with your new water gun. Measures: approx. 56 x 56 cm; 100% organic cotton. Weight: 31 g. Fair Trade Certified™ sewn.

Go to Item

Beanie Hat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Beanie Hat is a close-fitting, dense knit beanie with Patagonia jacquard lettering at the bottom. The Patagonia Beanie Hat is lightweight and compressible enough to fit in a jacket pocket, the knit yarn is made of 100% recycled polyester. Produced in a Fair Trade Certified™ facility, this Patagonia beanie is a great choice for the winter season. Weight: 74 g.

Go to Item

Better Sweater 1/4 Zip

129,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater 1/4-Zip is a monochrome fleece top that can be used solo or as a layer with a soft shell if you're into snowboarding. Made from bluesign®-certified fleece, the Patagonia Better Sweater 1/4 Zip Fleece Jacket is equipped with a knit-inspired shell, plus it has been colored with an energy-efficient and water-saving technique.

The Patagonia Better Sweater 1/4-Zip's features include:

• high-necked collar
• metal chest zipper with custom pull
• raglan sleeves
• left chest pocket with zip closure
• elastic micro-polyester binding at bottom and sleeve hem
• Patagonia woven label at left chest
• regular fit
• 100% recycled polyester fleece with knit-style shell, 339 g/m²
• Fair Trade Certified™ sewing
• weight: approx. 500g

Go to Item

Better Sweater Beanie

44,95 €*

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater Beanie is a cozy accessory that has been dyed with a low-impact process that significantly reduces the use of dyestuffs, energy and water compared to conventional dyeing methods. It's been made from bluesign™-approved melange fabric and equipped with a Patagonia woven label at the bottom. Fair Trade Certified™ sewn; 100% recycled polyester fleece with sweater-knit face, fleece interior and heathered yarns, 339 g/m².

Go to Item

Better Sweater Gloves

54,95 €*

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from recycled polyester fleece with sweater-knit face, the Patagonia Better Sweater Gloves are convertible fingerless glove-and-mitten combo. The mitten pockets can be folded back over the tops of the hands and buttoned securely, plus there's pull loops for easy on/off as well as elastic at wrists that seal out the cold. Weight:
68 g; 100% recycled polyester fleece with sweater-knit face, 10 oz. Fabric is certified as bluesign® approved.

Go to Item

Better Sweater Jacket

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater Jacket is a monochrome fleece top that can be used solo or as a layer with a soft shell if you're into snowboarding. Made from bluesign®-certified fleece, the Patagonia Better Sweater Jacket is equipped with a knit-inspired shell, plus it has been colored with an energy-efficient and water-saving technique.

The Patagonia Better Sweater Jacket's features include:

• high-necked collar
• metal front zipper with custom pull
• raglan sleeves
• left chest pocket with zip closure
• 2 pockets with zip closure at lower front
• elastic micro-polyester binding at bottom and sleeve hem
• Patagonia woven label at left chest
• regular fit
• 100% recycled polyester fleece with knit-style shell, 339 g/m²
• weight: approx. 590g
• Fair Trade Certified™ sewing

Go to Item

Better Sweater Jacket

Available Sizes: GIRLS XS, GIRLS S, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater Jacket is a monochrome fleece top that can be used solo or as a layer with a soft shell if you're into snowboarding. Made from bluesign®-certified fleece, the Patagonia Better Sweater Jacket is equipped with a knit-inspired shell, plus it has been colored with an energy-efficient and water-saving technique.

The Patagonia Better Sweater Jacket's features include:

• high-necked collar
• metal front zipper with custom pull
• raglan sleeves
• 2 pockets with zip closure at lower front
• elastic micro-polyester binding at bottom and sleeve hem
• additional pocket with zip closure at left sleeve
• Patagonia woven label at left chest
• regular fit
• 100% recycled polyester fleece with knit-style shell, 339 g/m²
• weight: approx. 451 g
• Fair Trade Certified™ sewing

Go to Item

Better Sweater Vest

119,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater Vest is a sleeveless fleece top that can be used solo or as a layer with a soft shell if you're into snowboarding. Made from bluesign®-certified fleece, the Patagonia Better Sweater Vest is equipped with a knit-inspired shell, plus it has been colored with an energy-efficient and water-saving technique.

The Patagonia Better Sweater Vest's features include:

• high-necked collar
• metal front zipper with custom pull
• left chest pocket with zip closure
• 2 pockets with zip closure at lower front
• elastic micro-polyester binding at bottom hem
• Patagonia woven label at left chest
• regular fit
• 100% recycled polyester fleece with knit-style shell, 339 g/m²
• weight: approx. 394 g
• Fair Trade Certified™ sewing

Go to Item

Better Sweater Vest

119,95 €*

Available Sizes: GIRLS S, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Black Hole Cube 14L

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Cube 14L's features include:
• waterproof construction with TPU film laminate and DWR impregnation
• easy-accessible main compartment that opens with a clamshell zipper so both halves can lay flat
• each half is separated by zip-out mesh for organization
• attachment loop
• top handle
• Patagonia lettering printed at side wall, next to waterproof 2-way zipper
• Patagonia woven label at the bottom of the front
• dimensions: approx. 27.9 x 35.6 x 15 cm
• volume: approx. 14 liters
• weight: approx. 290 g
• shell: 100% recycled polyester bluesign™-certified 300D rip-stop (solution-dyed) with TPU film laminate and DWR impregnation, 295 g/m²
• lining: 100% recycled polyester 200D weave with PU coating, 112 g/m²

Go to Item

Black Hole Cube - Medium

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Patagonia's Black Hole Cube Medium is a 6-liter pack sack with a hinged design and zippered mesh dividers to keep your gear organized in your pack or clothes in your duffel bag. The Patagonia Black Hole Cube Medium offers the same legendary performance found in other Black Hole bags, but with a big step towards environmental sustainability: the bag, lining as well as the webbing are made entirely of recycled material and are now laminated with a groundbreaking recycled TPU film with an elegant matte finish.

The Patagonia Black Hole Cube Medium's features include:

• waterproof construction with TPU film laminate and DWR impregnation
• interior mesh pocket and organizer panels
• attachment loop
• top handle
• Patagonia lettering printed next to waterproof top zipper
• dimensions: approx. 28 x 18 x 11 cm
• volume: approx. 6 liters
• weight: approx. 190 g
• main fabric: 100% recycled polyester bluesign™-certified 300D rip-stop with TPU film laminate, 295 g/m²
• lining: 100% recycled polyester 200D weave with PU coating, 102 g/m²
• webbing: 100% recycled nylon
• manufactured in a Fair Trade Certified™ factory

Go to Item

Black Hole Cube - Medium

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Black Hole Cube - Small

39,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Cube Small's features include:
• waterproof construction with TPU film laminate and DWR impregnation
• interior mesh pocket and organizer panels
• attachment loop
• top handle
• Patagonia lettering printed next to waterproof top zipper
• dimensions: approx. 25.5 x 13.5 x 10 cm
• volume: approx. 3 liters
• weight: approx. 99 g
• shell: 100% recycled polyester bluesign™-certified 300D rip-stop (solution-dyed) with TPU film laminate and DWR impregnation, 295 g/m²
• lining: 100% recycled polyester 200D weave with DWR and PU coating, 102 g/m²

Go to Item

Black Hole Cube - Small

39,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Black Hole Duffel 100L

219,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Black Hole® Duffel 100L by Patagonia is designed for long trips with a lot of luggage and is up for any adventure. This Patagonia bag offers the same legendary performance you've come to expect from Black Hole® bags, but with a big step toward environmental sustainability: the bag, lining and webbing are made entirely from recycled materials and are now laminated with a groundbreaking recycled TPU film with an elegant matte finish.

The Patagonia Black Hole® Duffle Bag blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this bag carries easily on dual handles or like a backpack.

Patagonia Black Hole® Duffle Bag 100L - features:

• U zip closure at main compartment
• interior organizer mesh pockets with zip closure at top
• adjustable, padded and anatomically shaped shoulder straps
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• foam-padded bottom
• Patagonia branding printed on front
• dimensions: approx. 66 x 35.5 x 28 cm
• volume: 100 liters
• weight: 1,595 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR impregnation, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating, 112 g/m²
• straps: 100% recycled nylon
• made in a Fair Trade Certified™ factory

Go to Item

Black Hole Duffel 40L

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Duffle Bag blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this bag carries easily on dual handles or an adjustable shoulder strap. This carry-on sized Patagonia duffel also meets most airline and train carry-on requirements.

Patagonia Black Hole Duffel 40L - features:

• U zip closure at main compartment
• interior organizer mesh pockets with zip closure at top
• dual carry handles plus anatomically shaped, padded and adjustable backpack shoulder straps
• exterior pocket with zip closure
• foam-padded bottom
• Patagonia branding printed on front
• dimensions: approx. 53.5 cm x 35 cm x 27 cm
• volume: 40 liters
• weight: approx. 930 g
• exterior fabric: 100% recycled polyester bluesign™-certified 300D rip-stop (solution-dyed) with TPU coating and DWR impregnation, 295 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating, 102 g/m²
• Fair Trade Certified™ sewn

Go to Item

Black Hole Duffel 55L

169,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Duffle Bag blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Duffle Bag 55L - features:

• U zip closure at main compartment
• interior organizer mesh pockets with zip closure at top
• dual carry handles plus anatomically shaped, padded and adjustable backpack shoulder straps
• side wall handles
• exterior pocket with zip closure
• foam-padded bottom
• Patagonia branding printed on front
• dimensions: approx. 60 x 40 x 30 cm
• volume: 55 liters
• weight: 1,165 g
• exterior fabric: 100% recycled polyester bluesign™-certified 300D rip-stop (solution-dyed) with TPU coating and DWR impregnation, 295 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating, 102 g/m²

Go to Item

Black Hole Duffel 55L

169,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Duffle Bag blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Duffle Bag 55L - features:

• U zip closure at main compartment
• interior organizer mesh pockets with zip closure at top
• dual carry handles plus anatomically shaped, padded and adjustable backpack shoulder straps
• side wall handles
• exterior pocket with zip closure
• foam-padded bottom
• Patagonia branding printed on front
• dimensions: approx. 60 x 40 x 30 cm
• volume: 55 liters
• weight: 1,165 g
• exterior fabric: 100% recycled polyester bluesign™-certified 300D rip-stop (solution-dyed) with TPU coating and DWR impregnation, 295 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating, 102 g/m²

Go to Item

Black Hole Duffel 70L

199,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Duffle Bag blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Duffle Bag 70L - features:

• U zip closure at main compartment
• interior organizer mesh pockets with zip closure at top
• dual carry handles plus anatomically shaped, padded and adjustable backpack shoulder straps
• side wall handles
• exterior pocket with zip closure
• foam-padded bottom
• Patagonia branding printed on front
• dimensions: approx. 66 x 35.5 x 28 cm
• volume: 70 liters
• weight: 1,365 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR impregnation, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating, 112 g/m²
• straps: 100% recycled nylon
• made in a Fair Trade Certified™ factory

Go to Item

Black Hole Duffel 70L

199,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Duffle Bag blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Duffle Bag 70L - features:

• U zip closure at main compartment
• interior organizer mesh pockets with zip closure at top
• adjustable shoulder strap
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• foam-padded bottom
• Patagonia branding printed on front
• dimensions: approx. 66 x 35.5 x 28 cm
• volume: 70 liters
• weight: 1,365 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR impregnation, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating, 112 g/m²
• straps: 100% recycled nylon
• made in a Fair Trade Certified™ factory

Go to Item

Black Hole Gear Tote

119,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from lightweight yet highly resilient, TPU-coated rip-stop fabric, the Patagonia Black Hole Gear Tote is a roomy bag equipped with a large opening at the main compartment, an exterior pocket with zip closure as well as reinforced handles. The loops at the front offer additional atachment options. Measures: approx. 56 x 21,5 x 37 cm; capacity: 61 liters. Weight: 835 g. bluesign®-certified 900D rip-stop fabric made from 100% polyester with recycled TPU coating, 478 g/m²; manufactured in a Fair Trade Certified™ factory.

Go to Item

Black Hole Mini MLC

199,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Mini MLC™ bag is a soft-sided suitcase that converts into a backpack with enough room and organization for world travel. The Patagonia Black Hole Mini MLC™ meets most carry-on requirements; it's made from 100% recycled fibers - a tough recycled polyester exterior fabric, recycled polyester lining and recycled nylon webbing.

Patagonia Black Hole Mini MLC - features:

• recycled polyester rip-stop with highly weather-resistant TPU-film laminate and a DWR (durable water repellent) finish
• clamshell design for the main zippered compartment features two separate chambers for easy packing, access and organization
• top zip compartment organizes essentials
• zip pocket with key clip provides easy access to tickets and passport
• tablet sleeve
• mesh pockets keep all other necessities organized and accessible
• laptop pocket is padded and zips open flat, making it TSA-approved; fits most 15" laptops
• 3 carrying options: backpack with ergonomic shoulder straps that tuck neatly into a zippered compartment; shoulder bag with comfortable shoulder strap; briefcase with two carry handles
• rear sleeve allows you to slip the tote on and off rolling luggage handles
• meets most carry-on requirements
• dimensions: approx. 30.5 x 51 x 18 cm
• capacity: 26 liters
• weight: 1,290 g
• body: 300D 100% post-consumer recycled polyester ripstop (22% solution-dyed) with a recycled TPU-film laminate, 295 g/m²
• lining: 200-denier 100% recycled polyester with a polyurethane coating, 102 g/m²
• both with a DWR (durable water repellent) finish
• shoulder straps: 600-denier fabric made of 100% recycled polyester, 231 g/m², and spacer mesh made of 100% recycled polyester, 281 g/m²
• webbing: 100% recycled nylon
• body fabric is certified as bluesign™ approved
• Fair Trade Certified™

Go to Item

Black Hole MLC

219,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole MLC™ bag is a soft-sided suitcase that converts into a backpack with enough room and organization for world travel. The Patagonia Black Hole MLC™ meets most carry-on requirements; it's made from 100% recycled fibers - a tough recycled polyester exterior fabric, recycled polyester lining and recycled nylon webbing.

Patagonia Black Hole MLC - features:

• recycled polyester rip-stop with highly weather-resistant TPU-film laminate and a DWR (durable water repellent) finish
• clamshell design for the main zippered compartment features two separate chambers for easy packing, access and organization
• top zip compartment organizes essentials
• zip pocket with key clip provides easy access to tickets and passport
• tablet sleeve
• mesh pockets keep all other necessities organized and accessible
• laptop pocket is padded and zips open flat, making it TSA-approved; fits most 15" laptops
• 3 carrying options: backpack with ergonomic shoulder straps that tuck neatly into a zippered compartment; shoulder bag with comfortable shoulder strap; briefcase with two carry handles
• rear sleeve allows you to slip the tote on and off rolling luggage handles
• meets most carry-on requirements
• weight: 1,655 g (3 lbs 10.38 oz)
• capacity: 45 liters
• body: 300D 100% postconsumer recycled polyester ripstop (22% solution-dyed) with a TPU-film laminate, 475 g/m²
• lining: 200-denier 100% recycled polyester with a polyurethane coating, 112 g/m²
• both with a DWR (durable water repellent) finish
• Fair Trade Certified™ sewn

Go to Item

Black Hole Pack 25L

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Pack's features include:
• waterproof construction with TPU film laminate and DWR impregnation
• front pocket with hidden zip closure
• interior mesh pocket
• interior organizer panels
• attachment strap on front
• stretch side pockets for water bottles, beer cans etc.
• adjustable, padded, and ergonomic Human Curve™ shoulder straps
• sternum strap with clip closure
• padded 15 inch laptop compartment
• top handle
• vertical Patagonia lettering on front
• dimensions: approx. 30 x 48 x 15 cm
• volume: approx. 25 liters
• weight: approx. 640 g
• shell: 100% recycled polyester bluesign™-certified 300D rip-stop with postindustrial recycled TPU film laminate and DWR impregnation, 295 g/m²
• lining: 100% recycled polyester 200D weave with PU coating, 102 g/m²
• body fabric is certified as bluesign® approved
• Fair Trade Certified™ sewn

Go to Item

Black Hole Tote 25L

79,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Patagonia's Black Hole Tote 25L is the perfect shopper, made from sturdy rip-stop fabric. Thanks to the capacity, tthis Patagonia bag is also perfect for a day trip or spontaneous adventures..

The Patagonia Black Hole Tote 25L's features include:

• hook closure at main compartment's opening
• interior pocket
• daisy chain straps on the front
• sturdy handles
• Patagonia branding printed on front
• dimensions: approx. 40 x 28 x 20.5 cm
• volume: 25 liters
• weight: approx. 360 g
• main fabric: 100% recycled polyester 300D rip-stop with recycled TPU coating, 295 g/m² (bluesign® approved)
• straps: 100% recycled nylon
• Fair Trade Certified™ sewn

Go to Item

Black Hole Waist Pack 5L

79,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Don't bulge the pockets of your slim-fitting pants with all the stuff you need while you're on the road. Be wise and make this Patagonia hip bag an ever-present companion piece, since it's waterproof construction with TPU film laminate and DWR finish.

The Patagonia Black Hole Waist Pack 5L is equipped with the following features:

• waterproof construction with TPU film laminate and DWR impregnation
• adjustable hip belt with side-release buckle
• 2-way metal zip closure with custom pull at main compartment's top flap
• front pocket with zip closure
• side sleeve pockets with compression straps
• interior zip pocket
• highly breathable mesh lumbar panel for carrying comfort
• Patagonia logo printed on front
• volume: approx. 5 liters
• weight: approx. 320 g
• shell: 100% recycled polyester 300D rip-stop (solution-dyed) with recycled TPU film laminate, 295 g/m²
• lining: 100% recycled polyester 200D weave with PU coating, 102 g/m²
• manufactured in a Fair Trade Certified™ company

Go to Item

Black Hole Wheeled Duffel 100L

449,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Wheeled Duffel 100L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 100L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 40.5 x 83 x 35 cm
• volume: 100 liters
• weight: 4,220 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 112 g/m²

Go to Item

Black Hole Wheeled Duffel 40L

319,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Wheeled Duffel 40L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 40L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 35.5 x 55 x 24 cm
• volume: 40 liters
• weight: 3,180 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 112 g/m²

Go to Item

Black Hole Wheeled Duffel 40L

349,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Black Hole Wheeled Duffel 70L

399,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Black Hole Wheeled Duffel 70L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 70L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 35.5 x 70 x 30 cm
• volume: 70 liters
• weight: 3,550 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 102 g/m²

Go to Item

Boardshort Logo Pocket Responsibili-Tee

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Boardshort Logo Pocket Responsibili-Tee is a 100% recycled t-shirt made from 4.8 plastic bottles and 0.3 pounds of cotton scrap, using 96% less water and creating 45% less CO2 than a conventional cotton tee.

The Patagonia Boardshort Logo Pocket Responsibili-Tee's features include:

• rib crew neck with interior taping
• Patagonia branding printed on chest pocket
• Patagonia Boardshort Logo printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• Fair Trade Certified™ sewing

Go to Item

Boardshort Logo Uprisal Hoody

99,95 €*