All Items 2445 Items

Available Sizes: EU 37, 37½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova blends everything the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. The signature heel tongue and inner sock construction add a soft and supportive feel to this all-day On performance runner. And with padded heel and customizable lacing built for enhanced bend and flex, the On Cloudnova is perfect for exploring city limits.

On Cloudnova - features/specifications:

• engineered mesh upper made from 64% polyester, 36% CDP
• padded bootie construction with fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• new connected CloudTec® outsole featuring Zero-gravity foam diffuses impact, then combines with the Speedboard for an explosive kick

Go to Item

Available Sizes: EU 41, 42

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova blends everything the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. The signature heel tongue and inner sock construction add a soft and supportive feel to this all-day On performance runner. And with padded heel and customizable lacing built for enhanced bend and flex, the On Cloudnova is perfect for exploring city limits.

On Cloudnova - features/specifications:

• engineered mesh upper made from 64% polyester, 36% CDP
• padded bootie construction with fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility

Go to Item

Available Sizes: EU 41, 42, 42½, 43, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova blends everything the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. The signature heel tongue and inner sock construction add a soft and supportive feel to this all-day On performance runner. And with padded heel and customizable lacing built for enhanced bend and flex, the On Cloudnova is perfect for exploring city limits.

On Cloudnova - features/specifications:

• engineered mesh upper made from 64% polyester, 36% CDP
• padded bootie construction with fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility

Go to Item

Available Sizes: EU 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova blends everything the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. The signature heel tongue and inner sock construction add a soft and supportive feel to this all-day On performance runner. And with padded heel and customizable lacing built for enhanced bend and flex, the On Cloudnova is perfect for exploring city limits.

On Cloudnova - features/specifications:

• engineered mesh upper made from 64% polyester, 36% CDP
• padded bootie construction with fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility

Go to Item

Cloudnova 2

Available Sizes: EU 37, 37½, 38, 38½, 39, 40, 40½, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Cloudnova 2 by On blends running technology with urban style for a unique comfort experience. Featuring a redesigned 50% bio-based Zero-Gravity foam midsole, it provides excellent cushioning while reducing CO₂ emissions by 20% compared to standard EVA midsoles. The integrated Speedboard® enhances flexibility and support, while the improved heel pillow and wider fit offer more stability and comfort. With its bold design and breathable materials, this sneaker is perfect for everyday city adventures.

On Cloudnova 2 - Features:

• Innovative design with Speedboard® for flexibility and support
• Breathable, lightweight upper inspired by Cloudboom Echo 3
• 50% bio-based Zero-Gravity foam midsole
• 20% fewer CO₂ emissions compared to standard EVA midsoles
• Stabilized heel pillow for extra support and speed

Go to Item

Cloudnova Form

Available Sizes: EU 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova Form blends the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova Form, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit.

On Cloudnova Form - features/specifications:

• engineered mesh upper made from 64% polyester, 36% CDP
• padded construction with breathable fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility
• recycled content: approx. 10% overall, 30% for polyester

Go to Item

Cloudnova Form

Available Sizes: EU 42, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Cloudnova Form

Available Sizes: EU 41, 42, 42½, 43, 44, 44½, 45, 46, 47, 47½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Cloudnova Form 2

Available Sizes: EU 37, 37½, 38, 38½, 39, 40, 40½, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The updated version of the On Cloudnova Form blends the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova Form 2, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit.

On Cloudnova Form 2 - features/specifications:

• highly breathable engineered mesh upper made from partly recycled polyester
• padded construction with breathable fabric lining
• external TPU heel counter with side-wall extension
• flexible nylon-mix Speedboard® for energy return
• new-generation CloudTec® for exceptional cushioning
• Zero-Gravity foam for maximum energy return, impact protection and durability
• at least 50% organically produced material in the midsole
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility
• drop: 14 mm
• 20% less CO2 emissions than standard EVA midsoles
• proportion of recycled materials - total proportion of recycled material: approx. 27% / polyester: 97% / thermoplastic polyurethane (TPU): 6% / total proportion of recycled EVA: at least 2%
• shoe box made from 100% recycled paper

Go to Item

Cloudnova Form 2

Available Sizes: EU 41, 42, 42½, 43, 44, 44½, 45, 47, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Cloudnova Void

Available Sizes: EU 37, 37½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova Void blends everything the brand's knowledge about running tech with a super-fresh design - responsive comfort meets urban energy. At the On Cloudnova, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. The signature heel tongue and inner sock construction add a soft and supportive feel to this all-day On performance runner. And with padded heel and customizable lacing built for enhanced bend and flex, the On Cloudnova is perfect for exploring city limits.

On Cloudnova Void - features/specifications:

• textured mesh upper made from 100% recycled polyester
• padded bootie construction with fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• new connected CloudTec® outsole featuring Zero-gravity foam diffuses impact, then combines with the Speedboard for an explosive kick

Go to Item

Cloudnova Void

Available Sizes: EU 42, 43, 44½, 47, 47½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Cloudnova X

Available Sizes: EU 37, 37½, 38, 38½, 39, 40, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Cloudnova X, On presents an update of the popular running shoe, which is equipped with an optimized profile for more grip during lateral movements. The On Cloudnova X is a road-ready design with technology suited for the gym. Soft materials guarantee a very comfortable running experience and are easy to put on and take off. The technology of the On Cloudnova X uses CloudTec® elements throughout for a smoother ride, while the special Speedboard™ provides more flexibility at the front and a powerful kick. For greater stability, the midsole is composed of two levels of Helion™ Superfoam and fast-releasing Clouds elements in the heel increase the support of the On Cloudnova X.

On Cloudnova X - features/specifications:

• breathable mesh upper made with synthetic details
• strategically padded construction for an optimized fit
• soft and breathable fabric lining
• X-shaped Speedboard® for more flexibility in the forefoot area
• CloudTec® cushioning throughout for a smoother ride
• Helion™ Superfoam midsole in two densities for stability
• flexible Clouds elements on the heel for more support
• drop: 15 mm

Go to Item

Cloudnova X

Available Sizes: EU 41, 42, 42½, 43, 44, 44½, 45, 46, 47, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Cloudnova Z5

189,95 €*

Available Sizes: EU 40½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudnova Z5 is a runner you weren’t supposed to see. An experiment, a hybrid, the marriage of different worlds for non-conforming comfort. The ultra-thin nano-mesh upper was originally designed for racing shoes. Breathable and flexible, the On Cloudnova Z5's upper is equipped with skeletal-structure support to give you a head start on comfort. Underfoot you get the connected CloudTec® outsole with rubber reinforcements for grip on slippy surfaces. Of course, some things never change. So CloudTec® adsorbs impacts while the bespoke Speedboard® propels you toward your goals. It’s On's most experimental design to date.

On Cloudnova Z5 - features/specifications:

• engineered nano mesh upper made from 100% polyester
• padded bootie construction with fabric lining
• open lace configuration over the metatarsals for flex
• external TPU heel counter with side-wall extension
• Speedboard™ adds comfort and kick
• new-generation CloudTec®: connected forefoot
• Zero-Gravity foam for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility

Go to Item

Cloudsurfer Next

Available Sizes: EU 41, 42, 42½, 43, 44, 44½, 45, 46, 47, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Cloudsurfer Next, the complete knowledge of On is packed into a stable design of the most modern embossing. The On Cloudsurfer stands for innovative looks and excellent performance, this charming model was designed for daily use on the asphalt. In the technology of the On Cloudsurfer Next provides primarily computer-optimized CloudTec Phase™ for an amazingly comfortable effect, because there sequentially collapsing clouds provide a silky smooth running experience. Break new ground and push your limits with the On Cloudsurfer Next!

On Cloudsurfer Next - features/specifications:

• engineered mesh and synthetic upper
• soft and breathable fabric lining
• plastic D ring eyelets for speed lacing
• TPU heel counter
• Speedboard™ adds comfort and kick
• computer-optimized CloudTec Phase™: Sequentially collapsing Clouds create a silky-smooth ride
• Zero-Gravity foam for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility

Go to Item

Cloudultra Fluorite

Available Sizes: EU 37, 37½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Special edition On Cloudultra colorway that reflects fluorite gemstone properties to light up the night! The On Cloudultra blends the brand's extensive knowledge about trail running technology into an advanced design that puts its focus on getting you to the top of the mountain. At the On Cloudultra, the durable and breathable perforated sandwich mesh upper is responsible for perfect climate, while the Missiongrip™ outsole combined with Speedboard™, two-layer CloudTec® plus Helion™ superfoam add unmatched comfort and cushioning. Plus, most of theses runners' upper is made from recycled polyester.

On Cloudultra Fluorite - features/specifications:

• durable and breathable perforated sandwich recycled poly mesh upper, reinforced with lightweight TPU
• adaptable sock-fit construction for superior comfort and a precise fit
• three-layer microfiber tongue
• soft and highly breathable fabric lining made from recycled polyester with anti-microbial finish plus spandex fibers at collar
• external oversized heel counter with side-wall extension
• Speedboard™ adds comfort for a responsive ride
• two-layer CloudTec® plus Helion™ superfoam for maximum energy return, cushioning and durability
• sticky Missiongrip™ outsole with multiple grip patterns to keep you in control on the trail

Go to Item

Logo Sock 3-Pack

24,95 €*

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Logo Sock 3 Pack consists of vintage sports socks equipped with a stretch cuff, vertical On jacquard lettering at the side of the rib-textured legs as well as reinforced toe and heel areas for durability and comfort. 59% organic cotton, 37% recycled polyamide, 4% elastane.

Go to Item

The Roger Advantage

Available Sizes: EU 37, 37½, 38½, 39, 41, 42

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by the world-famous tennis pro, the On The Roger Advantage has been billed as the most comfortable design of the Mr. Federer series. The Roger Advantage by On is agile at every step, thanks to the hidden Speedboard™ that offers maximum energy return to the all-day shoe, and CloudTec® technology for next-generation comfort. Inspired by tennis shoes, the On The Roger Advantage was constructed to be worn all day. A sock construction delivers On's signature step-in feel, while the perforated vegan leather upper combines a timeless look with ventilated comfort.

On The Roger Advantage - features/specs:

• synthetic leather upper with recycled polyester mesh collar
• lining: 100% recycled polyester mesh
• comfortable inner-sock construction
• suede patch on tongue
• custom Speedboard™ for smooth rolling motion
• hidden CloudTec® technology for ultimate comfort
• EVA and abrasion-resistant rubber sole construction with herringbone tread pattern for traction

Go to Item

The Roger Advantage

Available Sizes: EU 40½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

The Roger Advantage

Available Sizes: EU 40, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

The Roger Centre Court

Available Sizes: EU 41, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by the world-famous tennis pro, the On The Roger Centre Court is agile at every step, thanks to the hidden Speedboard™ that offers maximum energy return to the all-day shoe, and CloudTec® technology for next-generation comfort. The On The Roger Centre Court is inspired by tennis but it was constructed to be worn all day. A sock construction delivers On's signature step-in feel, while the perforated vegan leather upper combines a timeless look with ventilated comfort.

On The Roger Centre Court - features/specs:

• synthetic leather upper with recycled polyester mesh collar
• lining: 100% recycled polyester mesh
• comfortable inner-sock construction
• suede patch on tongue
• custom Speedboard™ for smooth rolling motion
• hidden CloudTec® technology for ultimate comfort
• EVA and abrasion-resistant rubber sole construction with herringbone tread pattern for traction
• limited edition

Go to Item

The Roger Centre Court

Available Sizes: EU 37, 37½, 38, 38½, 39, 40, 40½, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

The Roger Centre Court

Available Sizes: EU 41, 42½, 44½, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by the world-famous tennis pro, the On The Roger Centre Court is agile at every step, thanks to the hidden Speedboard™ that offers maximum energy return to the all-day shoe, and CloudTec® technology for next-generation comfort. The On Roger Centre Court is inspired by tennis but it was constructed to be worn all day. A sock construction delivers On's signature step-in feel, while the perforated vegan leather upper combines a timeless look with ventilated comfort.

On The Roger Centre Court - features/specs:

• synthetic leather upper with recycled polyester mesh collar
• lining: 100% recycled polyester mesh
• comfortable inner-sock construction
• suede patch on tongue
• custom Speedboard™ for smooth rolling motion
• hidden CloudTec® technology for ultimate comfort
• EVA and abrasion-resistant rubber sole construction with herringbone tread pattern for traction

Go to Item

The Roger Clubhouse

Available Sizes: EU 41, 43, 44

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by the world-famous tennis pro, the On Roger Clubhouse has been billed as the most comfortable design of the Mr. Federer series. The Roger Clubhouse by On is agile at every step, thanks to the hidden Speedboard™ that offers maximum energy return to the all-day shoe, and CloudTec® technology for next-generation comfort. Inspired by tennis shoes, the On Roger Clubhouse was constructed to be worn all day. A sock construction delivers On's signature step-in feel, while the perforated vegan leather upper combines a timeless look with ventilated comfort.

On The Roger Clubhouse - features/specs:

• synthetic leather upper with recycled polyester mesh collar
• lining: 100% recycled polyester mesh
• comfortable inner-sock construction
• suede patch on tongue
• custom Speedboard™ for smooth rolling motion
• hidden CloudTec® technology for ultimate comfort
• EVA and abrasion-resistant rubber sole construction with herringbone tread pattern for traction

Go to Item

The Roger Clubhouse

Available Sizes: EU 42½, 43, 44½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

The Roger Spin

Available Sizes: EU 41, 42, 42½, 44, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by the world-famous tennis pro, Mister Federer, the On The Roger Spin is agile at every step, thanks to the hidden Speedboard™ that offers maximum energy return to the all-day shoe, and CloudTec® technology for next-generation comfort. The On The Roger Spin is inspired by tennis but it was constructed to be worn all day. A sock construction delivers On's signature step-in feel, while the perforated vegan leather upper combines a timeless look with ventilated comfort.

On The Roger Spin - features/specs:

• textile upper made from recycled polyester with synthetic overlays
• lining: 100% recycled polyester mesh
• comfortable inner-sock construction
• suede patch on tongue
• custom Speedboard™ for smooth rolling motion
• hidden CloudTec® technology for ultimate comfort
• EVA and abrasion-resistant rubber sole construction with herringbone tread pattern for traction
• total recycled content: approx. 29% / Recycled polyester content: approx. 95%

Go to Item

On x Beams

Relaxed-T Beams

69,95 €*

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In addition to the great The Roger Pro Beams, On Running also has a sporty On x Beams Apparel collection that, as expected, combines the functionality of the sportswear brand with surprising details from the Beams creative lab. The On x Beams Capsule Collection also relies on recycled synthetic fibers for the sake of sustainability in order to keep the ecological footprint as small as possible.

On x Beams Relaxed-T Beams - Features:

• rib crew neck with interior tape
• On branding printed on left chest
• Beams logo printed on the rear
• loose fit
• breathable, quick-drying single jersey made from 50% organic cotton, 50% recycled polyester

Go to Item

On x Distance

Cloudmonster 2 Distance

On x Post Archive Faction

Available Sizes: EU 41, 42, 42½, 43, 44, 44½, 45, 46, 47, 47½, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The On Cloudmonster 2 blends everything the brand's knowledge about running tech with a chunky shape - responsive comfort meets urban energy. At the On Cloudmonster 2, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. Helion Superfoam™ in the midsole guarantees maximum impact protection, flexibility, cushioning and energy return when running in these all-day On performance runners. The padded heel section and the individually adjustable lacing guarantee a perfect fit with maximum freedom of movement, while the On Cloudmonster 2 is also more dynamic and stable than its predecessor.

On Cloudmonster 2 Distance - features/specifications:

• engineered dual layer mesh upper made from 64% polyester, 36% CDP
• padded bootie construction with elastic gussets and breathable fabric lining
• open lace configuration over the metatarsals for flex
• externally stabilized heel area
• Speedboard™ adds comfort and kick
• new-generation CloudTec® for for maximum cushioning and energy on easy or longer runs
• Helion Superfoam™ for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility
• weight: approx. 300g in EU M 42
• 6 mm drop (29 mm forefoot / 35 mm heel)

Go to Item

Cloudmonster 2 PAF

249,95 €*

Available Sizes: EU 41, 42½, 43, 44½, 45, 46, 47½, 48

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Post Archive Faction collabo, On has achieved a great success! Founded in 2018 by Dongjoon Lim and Sookyo Jeong, the Japanese company Post Archive Faction has formulated a vision by disregarding the norms of the established design landscape - instead, PAF deconstructs garments and objects and reassembles them to explore what is possible with creativity and free spirit. As a result, the familiar appears in a completely new light. The designs from the Post Archive Faction collection are put together in experimental cuts that deliberately ignore conventional design craftsmanship and use asymmetrical constructions or creasing techniques to create a new interpretation of individual design language aimed at uniqueness. And it's exactly this approach that makes the On x Post Archive Faction collaboration in general, and the Cloudmonster 2 PAF in particular, so appealing.

The On Cloudmonster 2 blends everything the brand's knowledge about running tech with a chunky shape - responsive comfort meets urban energy. At the On Cloudmonster 2, next-level CloudTec® cushions impact and a bespoke Speedboard™ offer the highest support you can imagine, while rubber reinforcements support the natural rolling motion of the foot, and the redesigned tongue piece offers an unrivaled fit. Helion Superfoam™ in the midsole guarantees maximum impact protection, flexibility, cushioning and energy return when running in these all-day On performance runners. The padded heel section and the individually adjustable lacing guarantee a perfect fit with maximum freedom of movement, while the On Cloudmonster 2 is also more dynamic and stable than its predecessor.

On x Post Archive Faction Cloudmonster 2 PAF - features/specifications:

• breathable mesh upper
• padded bootie construction with elastic gussets and breathable fabric lining
• open lace configuration over the metatarsals for flex
• externally stabilized heel area
• Speedboard™ adds comfort and kick
• new-generation CloudTec® for for maximum cushioning and energy on easy or longer runs
• Helion Superfoam™ for maximum energy return, impact protection and durability
• EVA sole with rubber reinforcements and lateral grooves for maximum flexibility
• 6 mm drop (29 mm forefoot / 35 mm heel)

Go to Item

Opek

Corners T-Shirt

28,49 €* 29,99 € -5%

Available Sizes: S, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Opek Corners Tee is equipped with the following features:
• rib crew neck with interior tape
• Corners artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

2M Red MM-Tonabnehmer

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
Channel balance at 1 kHz - 1.5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1.6-2.0 g (16-20 mN)
Tracking force, recommended - 1.8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
2M standard and 2M Verso cartridges weight - 7.2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Go to Item

2M Red Verso MM-Tonabnehmer

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

2MR Red

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Step into the music with the 2M Red
With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.

Featues:
The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire.
The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red delivers an open, dynamic sound with a slight touch of warmth.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Red
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Go to Item

Alignment Tool SME-Schablone

7,90 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Go to Item

"Cause I Can Do It In The Mix" Slipmat

19,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

Go to Item

Concorde MkII DIGITAL Single

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

Go to Item

Concorde MkII DIGITAL Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DIGITAL

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII DIGITAL Twin

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII Fingerlift

9,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange, Yellow and White colors which is perfect to personalize the cartridge the way you want it.

Go to Item

Concorde MkII Fingerlift

9,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Go to Item

Concorde MkII SCRATCH Single

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

Go to Item

Concorde MkII SCRATCH Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII SCRATCH Twin

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde Music Red

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

Go to Item

DigiTrack Limited Stylus

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

Go to Item

MC Quintet Red

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Enter the Exclusive world of Ortofon’s famous moving coil sound!
The Quintet Red is a perfect introduction to the world of Ortofon moving coils.
It features an Elliptical diamond which is cut and polished to Ortofon’s standards.

This entry-level MC cartridge has very high price-to-performance ratio and is a perfect all-rounder for the newcomers to the world of Moving Coil cartridges.

MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The ST-7 transformer is a perfect match for the MC Quintet Red cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.

MC Quintet Red Technical data:
• Output voltage at 1 kHz 5 cm/sec - 0.5 mV
• Channel balance - < 1.5 dB
• Channel separation at 1 kHz - > 21 dB
• Channel separation at 15 kHz - > 14 dB
• Frequency response 20-20.000 Hz - +/-2.5 dB
• Tracking ability at 315 Hz at recommended tracking force *) - 65 μm
• Compliance, dynamic, lateral - 15 μm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 μm
• Tracking force range - 2.1-2.5 g (21-25 mN)
• Tracking force recommended - 2.3 g (23 mN)
• Tracking angle - 20º
• Internal impedance, DC resistance - 7 Ohm
• Recommended load impedance - >20 Ohm
• Cartridge body material - ABS/Aluminium
• Coil wire material - Copper
• Cartridge colour - Red
• Cartridge weight - 9 g
*) Typical value

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for Quintet cartridge.

Ease of use
Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell.

The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

Go to Item

MFS Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Go to Item

OM Qbert

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Go to Item

OM Scratch x SH-4 Headshell Blue

139,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

Go to Item

Premium Cartridge Alignment Tool

9,90 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium Alignment Tool

Your go-to precision companion for perfecting your turntable setup. Crafted to the highest standards, this tool is a larger and sturdier version, boasting a remarkable 75% increase in rigidity compared to the standard model.

The Premium Cartridge Alignment Tool features a robust build, providing enhanced durability and stability during the alignment process. Its larger size ensures a more secure grip and heightened accuracy.

With two zero points Baerwald alignment, this tool is engineered to deliver optimal tracking performance. Achieve precise cartridge alignment for accurate playback, allowing you to experience your vinyl collection with unparalleled clarity and fidelity.

How to use the alignment tool:
https://ortofon.com/pages/alignment-tool

Go to Item

Scratch Stylus

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Go to Item

Stylus 2M Red

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical data:
• Frequency range 20-22.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Red
• Recommended for following cartridges 2M Red / 2M Red Verso(Interchangeable with 2M Blue / 2M Blue Verso)

Go to Item

Stylus Concorde Music Red

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Stylus Guard for 2M Series (1 Stück)

2,69 €* 2,99 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

VNL

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL Premounted x SH-4 Headshell Black

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\\ Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\ Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \ Stylus

35,10 €* 39,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

"What Is A DJ If He Can't SCRATCH" Slipmat

19,90 €*

Stankonia Oversize T-Shirt

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

OutKast

29,90 €*

PANDA presents Isaac Haze X DJ C.S.P.

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OutKast Stankonia Oversize Tee is equipped with the following features:
• rib crew neck with interior tape
• Stankonia artwork printed on front
• loose fit
• 100% cotton single jersey, 240 g/m²

Go to Item

ACAP / 10 Y Bundle

| Original (DUSTONWAX)

41,99 €*

Release: Original

Genre: Hip Hop

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We celebrate our 10th anniversary with two own songs created in collaboration with Isaac Haze and DJ C.S.P.
The limited 7“ on clear pink vinyl is pressed 150 times. The bundle contains the 7″ vinyl, one premium Russell Athletics T-Shirt and an ACAP cutout sticker.
Go support this project – the complete income of PANDA will be donated to the following social institutions:
• KreativWerkstatt & Atelier bhz
• Nachsorgeklinik Tannheim
• Viva con Agua

Bundle facts:
• 7″ on pink wax
• Download code
• Plastic sleeve
• Analog mastering
• 45 rpm
• Limited to 150 copies (120 for sale)
• Hand-numbered
• Heavy quality t-shirt
• Sticker included

Go to Item

Parel Studios

BP Tee

74,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios BP Tee is equipped with the following features:
• rib crew neck with interior tape
• Parel Studios branding printed on left chest and upper rear
• relaxed fit
• 100% organic cotton single jersey
• made in Portugal

Go to Item

50 Year Responsibili-Tee

38,20 €* 44,95 € -15%

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

After 50 years in business, Patagonia is looking ahead to the next 50 years. One of Patagonia's most important goals remains saving our home planet, and that includes conserving resources. Produced in a Fair Trade Certified™ facility, this garment is 100% recycled - it's made from cutting scraps and plastic bottles, so it reduces dependence on raw materials.

The Patagonia 50 Year Responsibili-Tee's features include:

• rib crew neck with interior tape
• Patagonia 50 Year graphhis printed at left chest and on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 183 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• Fair Trade Certified™ sewing

Go to Item

73 Skyline Organic T-Shirt

Available Sizes: XS, S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from lightweight organic cotton, the Patagonia 73 Skyline Organic T-Shirt uses no toxic pesticides, benefits soil quality and biodiversity, uses 84% less water and creates 16% less CO2 than a conventional cotton tee.

The Patagonia 73 Skyline Organic T-Shirt is equipped with the following features:

• rib crew neck with interior tape
• Patagonia branding printed on left chest
• Patagonia's 73 Skyline graphic printed on upper back
• regular fit
• soft 100% organic cotton single jersey, 156 g/m²
• Fair Trade Certified™ sewing

Go to Item

Active Mesh Bra

15,98 €* 39,95 € -60%

Available Sizes: GIRLS S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Active Mesh Bra is an all-purpose, seamless top that supports a variety of sizes and is made from synthetic fabric with miDori™ bioSoft for added wicking and softness as well as HeiQ® Fresh durable odor control. Additional features of the Patagonia Active Mesh Bra include spaghetti straps, a graphic print at left front, an elastic bottom band with Patagonia wordmark branding as well as a racer-back. Fair Trade Certified™; 90% polyester (67% recycled), 10% elastane jersey, 153 g/m².

Go to Item

Baggies Lights

42,21 €* 64,95 € -35%

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Lights are the slimmer brother of the regular Baggies, made from lightweight NetPlus® fabric, equipped with mesh lining.

The Patagonia Baggies Lights are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• Patagonia woven label at lower left leg
• regular fit
• 16.5 cm inseam
• weight: approx. 173 g
• shell: bluesign® approved weave made from 95% nylon (65% recycled), 5% elastane, 142 g/m², with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals)
• lining: 100% polyester mesh

Go to Item

Better Sweater Jacket

134,95 €* 149,95 € -10%

Available Sizes: GIRLS XS, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater Jacket is a monochrome fleece top that can be used solo or as a layer with a soft shell if you're into snowboarding. Made from bluesign®-certified fleece, the Patagonia Better Sweater Jacket is equipped with a knit-inspired shell, plus it has been colored with an energy-efficient and water-saving technique.

The Patagonia Better Sweater Jacket's features include:

• high-necked collar
• metal front zipper with custom pull
• raglan sleeves
• 2 pockets with zip closure at lower front
• elastic micro-polyester binding at bottom and sleeve hem
• additional pocket with zip closure at left sleeve
• Patagonia woven label at left chest
• regular fit
• 100% recycled polyester fleece with knit-style shell, 339 g/m²
• weight: approx. 451 g
• Fair Trade Certified™ sewing

Go to Item

Better Sweater Vest

119,95 €*

Available Sizes: GIRLS XS, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Better Sweater Vest is a sleeveless fleece top that can be used solo or as a layer with a soft shell if you're into snowboarding. Made from bluesign®-certified fleece, the Patagonia Better Sweater Vest is equipped with a knit-inspired shell, plus it has been colored with an energy-efficient and water-saving technique.

The Patagonia Better Sweater Vest's features include:

• high-necked collar
• metal front zipper with custom pull
• left chest pocket with zip closure
• 2 pockets with zip closure at lower front
• elastic micro-polyester binding at bottom hem
• Patagonia woven label at left chest
• regular fit
• 100% recycled polyester fleece with knit-style shell, 339 g/m²
• weight: approx. 301 g
• made in a Fair Trade Certified™ factory

Go to Item

Boardshort Logo Pocket Responsibili-Tee

Available Sizes: XS, S, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Boardshort Logo Pocket Responsibili-Tee is a 100% recycled t-shirt made from 4.8 plastic bottles and 0.3 pounds of cotton scrap, using 96% less water and creating 45% less CO2 than a conventional cotton tee.

The Patagonia Boardshort Logo Pocket Responsibili-Tee's features include:

• rib crew neck with interior taping
• Patagonia branding printed on chest pocket
• Patagonia Boardshort Logo printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• Fair Trade Certified™ sewing

Go to Item

Chouinard Crest Ringer Responsibili-Tee

42,70 €* 44,95 € -5%

Available Sizes: GIRLS XS, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Chouinard Crest Ringer Responsibili-Tee's features include:
• contrast ribbed ringer crew neck
• Patagonia Chouinard branding printed at left chest
• Patagonia Chouinard artwork printed on the rear
• PVC- and phthalate-free ink
• contrast ribbed ringer cuffs
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft single jersey, 183 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• Fair Trade Certified™ sewing

Go to Item

Chouinard Crest Uprisal Hoody

99,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Chouinard Crest Uprisal Hoody is a classic hooded sweater design made from brushed, recycled fleece in a Fair Trade Certified™ factory.

The Patagonia Chouinard Crest Uprisal Hoody's features include:

• drawstring-adjustable two-layer hood
• Patagonia Chouinard Crest branding printed on left chest (inks are PVC- and phthalate-free)
• kangaroo pocket
• stretch rib cuffs and bottom band
• Chouinard Crest graphic printed on upper rear (inks are PVC- and phthalate-free)
• Patagonia woven flag label at lower left side seam
• regular fit
• 55% recycled polyester, 45% recycled cotton brush-back fleece, 390 g/m²
• rib details: 50% recycled cotton, 50% recycled polyester, 251 g/m²
• made in a Fair Trade Certified™ factory
• weight: approx. 680 g

Go to Item

Classic Retro-X Jacket

229,95 €*

Available Sizes: GIRLS XS, GIRLS S, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Classic Retro-X Jacket is a lightweight fleece top for outdoors action with Y-Joint sleeves for better mobility at shoulders and arms. Made from 6mm sherpa fleece, the Patagonia Classic Retro-X Jacket is also equipped with three zip pockets as well as moisture-wicking mesh lining with wind-blocking membrane.

The Patagonia Classic Retro-X Jacket's features include:

• high-necked collar
• metal front zipper with custom pull and internal storm flap
• Y-Joint™ sleeves for added monility
• contrast patch pocket with zip closure at left chest
• 2 side-entry slit pockets with zip closure at lower front
• elastic binding at bottom and sleeve hem
• Patagonia woven label at chest pocket
• regular fit
• shell: 100% polyester 6 mm sherpa fleece with laminated, wind-blocking membrane (85% recycled), 441 g/m²
• pocket lining: 100% recycled polyester brushed mesh, 71 g/m²
• chest pocket and trim: 100% recycled nylon plain weave with DWR finish, 153 g/m²
• Fair Trade Certified™
• weight: 615 g

Go to Item

Classic Retro-X Jacket

229,95 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Classic Retro-X Jacket is a lightweight fleece top for outdoors action with Y-Joint sleeves for better mobility at shoulders and arms. Made from 6mm sherpa fleece, the Patagonia Classic Retro-X Jacket is also equipped with three zip pockets as well as moisture-wicking mesh lining with wind-blocking membrane.

The Patagonia Classic Retro-X Jacket's features include:

• high-necked collar
• metal front zipper with custom pull and internal storm flap
• Y-Joint™ sleeves for added monility
• contrast chest pocket with zip closure
• 2 side-entry slit pockets with zip closure at lower front
• elastic binding at bottom and sleeve hem
• Patagonia woven label at chest pocket
• regular fit
• shell: 100% polyester 6 mm sherpa fleece (85% recycled), 441 g/m²
• lining: 100% polyester brushed mesh with wind-blocking membrane and HeiQ® Fresh durable odor control (50% recycled), 109 g/m²
• chest pocket and trim: 100% nylon plain weave with DWR finish, 115 g/m²
• Fair Trade Certified™
• weight: 774 g

Go to Item

Commontrail Pocket Responsibili-Tee

37,46 €* 49,95 € -25%

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Commontrail Logo Pocket Responsibili-Tee is a 100% recycled t-shirt made from 4.8 plastic bottles and 0.3 pounds of cotton scrap, using 96% less water and creating 45% less CO2 than a conventional cotton tee.

The Patagonia Commontrail Logo Pocket Responsibili-Tee's features include:

• rib crew neck with interior taping
• Patagonia lettering printed above chest pocket, Commontrail graphic printed on chest pocket
• Patagonia Commontrail artwork printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 186 g/m²
• Fair Trade Certified™ sewing

Go to Item

Cotton Down Jacket

349,95 €*

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Patagonia Cotton Down Jacket - Features:
• high-necked hood with tonal stretch bordering
• 2-way metal front zipper with custom pulls and interior storm flap
• raglan sleeves
• raglan sleeves
• Patagonia woven label at left chest
• 2 welt pockets at lower front
• stretch bordering at cuffs and bottom hem
• interior chest pocket with zip closure at wearer’s left
• regular fit
• shell: 100% Cotton in Conversion plain weave with a peached face, 6.2 oz
• body & hood lining: 100% Cotton in Conversion flannel, 4.7 oz
• sleeve lining: 100% recycled polyester taffeta with a HeiQ® Eco Dry & PFC-free DWR finish
• Fair Trade Certified™ sewn

Go to Item

Fitz Roy Icon Responsibili-Tee

Available Sizes: XS, S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Fitz Roy Icon Responsibili-Tee's features include:
• rib crew neck with interior taping
• Patagonia branding printed with PVC- and phthalate-free ink at left chest
• Patagonia's Fitz Roy Icon graphic embroidered on left sleeve
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• Fair Trade Certified™ sewing

Go to Item

How To Change Responsibili-Tee

29,21 €* 44,95 € -35%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia How To Change Responsibili-Tee's features include:
• rib crew neck with interior taping
• Patagonia double tree branding printed at left chest
• How To Change artwork printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• Fair Trade Certified™ sewing

Go to Item

Long-Sleeved Chill Responsibili-Tee

Available Sizes: M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Long-Sleeved Chill Responsibili-Tee by Patagonia combines classic style with a commitment to sustainability. Made from 100% recycled cotton, including fabric scraps and plastic bottles, this long-sleeved shirt helps reduce the use of new raw materials. Featuring a comfortable crewneck and a straight hem, it offers versatile styling options, while the Fair Trade Certified™ production ensures fair wages for workers. This is the perfect everyday shirt that blends comfort with responsibility.

Patagonia Long-Sleeved Chill Responsibili-Tee - Features:

• rib crew neck with interior taping
• Patagonia "Chill" branding printed at left chest
• stretch rib cuffs
• Chill artwork printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 186 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• made in a Fair Trade Certified™ factory

Go to Item

Long-Sleeved Lightweight Fjord Flannel Shirt

89,95 €*

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Long-Sleeved Cotton in Conversion Lightweight Fjord Flannel Shirt's features include:
• yarn dyed plaid pattern
• turn-down collar
• button front closure
• self fabric flap pocket with button closure at left chest
• straight bottom hem
• button cuffs
• back yoke
• Patagonia woven flag label at left side seam
• regular fit
• 100% Cotton in Conversion cotton double-sided brushed flannel, 163 g/m²
• Fair Trade Certified™ sewn

Go to Item

Long-Sleeved P-6 Logo Responsibili-Tee

Available Sizes: XS, S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia L/S P-6 Logo Responsibili-Tee's features include:
• rib crew neck with interior taping
• Patagonia branding printed at left chest
• stretch rib cuffs
• Patagonia P-6 Logo artwork printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• Fair Trade Certified™ sewing

Go to Item

Long-Sleeved P-6 Logo Responsibili-Tee

Available Sizes: XS, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Long-Sleeved Strataspire Responsibili-Tee

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia L/S Strataspire Responsibili-Tee's features include:
• rib crew neck with interior taping
• Patagonia Strataspire branding printed on left chest (inks are PVC- and phthalate-free)
• stretch rib cuffs
• Strataspire graphic printed on the rear (inks are PVC- and phthalate-free)
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% postconsumer recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• made in a Fair Trade Certified™ factory

Go to Item

Microdini 1/2 Zip Pullover

123,45 €* 129,95 € -5%

Available Sizes: GIRLS XS, GIRLS S, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Microdini 1/2 Zip Pullover´s features include:
• color-blocked cut and sew construction
• high-necked collar with interior tape plus 1/2 front metal zipper
• contrast taffeta patch pocket with vertical zip closure plus Patagonia woven label at left chest
• stretch rib cuffs and bottom band
• relaxed fit
• main fabric: 100% recycled polyester velour lightweight fleece, 193 g/m²
• pocket: 100% recycled nylon Houdini rip-stop, 41 g/m², with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals)
• fabrics are certified as bluesign® approved
• Fair Trade Certified™ sewn
• weight: 247 g

Go to Item

P-6 Label Trad Cap

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia P-6 Label Trad Cap is an adjustable strapback hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by Patagonia.

Patagonia P-6 Label Trad Cap - features:

• mid rise 6-panel construction
• Patagonia woven label on front
• tonal eyelet stitching
• pre-curved contrast visor
• adjustable strap with branded metal buckle plus Patagonia woven flag label at the rear
• interior includes plain taping and a moisture-absorbing sweatband
• 100% organic cotton canvas, 254 g/m²
• visor: NetPlus™ made of 100% recycled fishnets
• Fair Trade Certified™ sewn
• weight: 85 g

Go to Item

P-6 Logo LoPro Trucker Hat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia P-6 Logo LoPro Trucker Hat is all about never-ending rides on lonely highways while listening to Dolly Parton tapes. Roll on, big mama!

Patagonia P-6 Logo LoPro Trucker Hat - features:

• mid-rise 6 panel construction
• Patagonia embroidered patch on front panels
• side and rear mesh panels
• tonal eyelet stitching at front's vent holes
• woven Patagonia flag label at 7 eye snapback plastic closure
• interior includes plain taping and a moisture-absorbing sweatband
• front panels and visor: 100% organic cotton canvas, 254 g/m²
• Mesh: 100% polyester, 85 g/m²
• visor: NetPlus™ made of 100% recycled fishnets
• weight: 85 g
• Fair Trade Certified™ sewn

Go to Item

P-6 Logo LoPro Trucker Hat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

P-6 Logo Organic T-Shirt

29,70 €* 34,95 € -15%

Available Sizes: M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from lightweight organic cotton, the Patagonia P-6 Logo Organic T-Shirt uses no toxic pesticides, benefits soil quality and biodiversity, and saves 27 gallons of water compared to a conventional cotton tee.

The Patagonia P-6 Logo Organic T-Shirt's features include:

• rib crew neck with interior tape
• Patagonia lettering printed with PVC- and phthalate-free inks at left chest
• Patagonia P-6 Logo artwork printed with PVC- and phthalate-free inks on the rear
• regular fit
• bluesign™-approved 100% organic cotton single jersey, 4 oz
• Fair Trade Certified™ sewing

Go to Item

P-6 Logo Responsibili-Tee

Available Sizes: XS, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia P-6 Logo Responsibili-Tee's features include:
• rib crew neck with interior taping
• Patagonia branding printed at left chest
• Patagonia P-6 Logo artwork printed on the rear
• PVC- and phthalate-free ink
• regular fit
• 50% recycled cotton, 50% recycled polyester super-soft, bluesign™ approved single jersey, 190 g/m²
• made from 4.8 plastic bottles and .26 pounds of fabric scrap
• saves 63 gallons of water compared to a conventional cotton t-shirt
• Fair Trade Certified™ sewing

Go to Item

P-6 Logo Responsibili-Tee

Available Sizes: XS, S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

P-6 Logo Trucker Hat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia P-6 Logo Trucker Hat is all about never-ending rides on lonely highways while listening to Dolly Parton tapes. Roll on, big mama!

Patagonia P-6 Logo Trucker Hat - features:

• high rise construction
• Patagonia embroidered logo on front panels
• side and rear mesh panels
• tonal eyelet stitching at front's vent holes
• woven Patagonia flag label at 7 eye snapback plastic closure
• interior includes plain taping and a moisture-absorbing sweatband
• front panels and visor: 100% organic cotton canvas, 254 g/m²
• visor: NetPlus™ made of 100% recycled fishnets
• mesh: 100% recycled polyester, 109 g/m²
• weight: 91 g
• Fair Trade Certified™ sewn

Go to Item

P-6 Logo Trucker Hat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia P-6 Logo Trucker Hat is all about never-ending rides on lonely highways while listening to Dolly Parton tapes. Roll on, big mama!

Patagonia P-6 Logo Trucker Hat - features:

• high rise construction
• Patagonia embroidered label on front panels
• side and rear mesh panels
• tonal eyelet stitching at front's vent holes
• woven Patagonia flag label at 7 eye snapback plastic closure
• interior includes plain taping and a moisture-absorbing sweatband
• front panels and visor: 100% organic cotton canvas, 254 g/m²
• visor: NetPlus™ made of 100% recycled fishnets
• mesh: 100% recycled polyester, 109 g/m²
• weight: 91 g
• Fair Trade Certified™ sewn

Go to Item

P-6 Mission Organic T-Shirt

Available Sizes: GIRLS XS

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from lightweight organic cotton, the Patagonia P-6 Mission Organic T-Shirt uses no toxic pesticides, benefits soil quality and biodiversity, uses 84% less water and creates 16% less CO2 than a conventional cotton tee.

The Patagonia P-6 Mission Organic T-Shirt is equipped with the following features:

• rib crew neck with interior tape
• Patagonia lettering printed on left chest
• Patagonia's P-6 Mission graphic printed on upper back
• regular fit
• soft 100% organic cotton single jersey, 156 g/m²
• Fair Trade Certified™ sewing

Go to Item

Powder Town Beanie

42,45 €* 49,95 € -15%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Powder Town Beanie is a Fair Trade™-certified pom pom knit hat equipped with jacquarded graphic details plus Patagonia lettering as well as Patagonia clip label at the ribbed cuff. 96% recycled polyester, 4% elastane; weight: 173 g.

Go to Item

Powder Town Headband

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Powder Town Headband is a Fair Trade™ approved, rib-knit accessoriy equipped with jacquarded stripe details plus a Patagonia lettering as well as comfy fleece lining. Knit yarn: 100% recycled polyester; fleece: 100% recycled polyester. Weight: 60 g.

Go to Item

Regenerative Organic Certified Cotton Essential Hoody

74,96 €* 99,95 € -25%

Available Sizes: GIRLS XS, GIRLS S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Patagonia's Regenerative Organic Certified Cotton Essential Hoody has been made of Regenerative Organic Certified™ cotton from farms working toward the highest organic standard, which aims to rehabilitate soil, respect animal welfare and improve the lives of farmers. Because healthy soil traps carbon, this growing movement could help stop climate change.

The Patagonia Regenerative Organic Certified Cotton Essential Hoody is equipped with the following features:

• V-necked hood with interior tape
• raglan sleeves
• stretch rib cuffs and bottom band
• Patagonia woven label at left chest
• relaxed fit, slightly cropped cut
• 100% Regenerative Organic Certified™ cotton French terry, 319 g/m²
• rib details: 89% Regenerative Organic Certified™ cotton, 11% elastane, 298 g/m²
• fabrics are bluesign™ approved
• Fair Trade Certified™ sewn

Go to Item

Rib Knit Tank

Available Sizes: GIRLS XS, GIRLS S, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Rib Knit Tank by Patagonia is a vintage tank top in a slim fit, equipped with tonal bordering at neckline and arm openings as well as a scalloped bottom hem for a feminine touch. Soft rib-textured fabric made from 93% Tencel™ Lyocell, 7% elastane, 234 g/m²; manufactured in a Fair Trade Certified™ company.

Go to Item

Rib Knit Top

Available Sizes: GIRLS XS, GIRLS S, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Rib Knit Top by Patagonia is a timeless top in a relaxed, straight cut with a ribbed texture, self-fabric scoop neck as well as ruffled sleeve hems, made from 93% Tencel™ Lyocell, 7% elastane, 234 g/m². Fair Trade Certified™ sewn.

Go to Item

Skysail Jacket

146,96 €* 209,95 € -30%