All Items 7147 Items

Portuguese Tile Shirt

82,47 €* 149,95 € -45%

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

If there's a design that expresses lifestyle and a peaceful state of mind, it must be the Portuguese Flannel Portuguese Tile Shirt. You can't go wrong with this nice design...

The Portuguese Flannel Portuguese Tile Shirt's features include:

• yarn dyed pattern
• lapel collar
• button front closure
• self-fabric patch pocket at left chest
• straight bottom hem
• short stretch pleats beneath back yoke
• regular fit
• 100% cotton
• made in Portugal

Go to Item

Sofa Towel Shirt

48,88 €* 162,95 € -70%

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

If there's a design that expresses lifestyle and a peaceful state of mind, it must be the Portuguese Flannel Sofa Towel Shirt. You can't go wrong with this nice design...

The Portuguese Flannel Sofa Towel Shirt's features include:

• airy knitted pattern with various graphic details in the a vintage table cloth style
• turn-down collar
• button front closure
• straight bottom hem
• back yoke
• regular fit
• 100% cotton
• made in Portugal

Go to Item

Square Knit Shirt

151,96 €* 189,95 € -20%

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

If there's a design that expresses lifestyle and a peaceful state of mind, it must be the Portuguese Flannel Square Knit Shirt. You can't go wrong with this nice design...

The Portuguese Flannel Square Knit Shirt's features include:

• airy knit pattern with different squares
• turn-down collar
• button front closure
• straight bottom hem
• back yoke
• regular fit
• 78% cotton, 15% polyester, 7% other fibers
• made in Portugal

Go to Item

Teca Shirt

119,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Portuguese Flannel Teca Shirt's features include:
• turn-down collar
• button front closure with urea buttons
• self-fabric patch pocket at left chest
• curved bottom hem
• urea button cuffs
• back yoke with centered knife pleat
• extended rear panel
• regular fit
• 100% cotton flannel
• made in Portugal

Go to Item

Vigmar Shirt

124,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

If there's a design that expresses lifestyle and a peaceful state of mind, it must be the Portuguese Flannel Vigmar Shirt. You can't go wrong with this nice design...

The Portuguese Flannel Vigmar Shirt's features include:

• yarn dyed plaid pattern
• turn-down collar
• button front closure
• self-fabric patch pocket at left chest
• curved bottom hem
• button cuffs
• centered knife pleat beneath back yoke
• regular fit
• 100% cotton
• made in Portugal

Go to Item

Post Malone

HT Live Close-Up T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Post Malone HT Live Close-UpTee is equipped with the following features:
• rib crew neck with interior tape
• HT Live Close-Upartwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Post Malone

Red & Blue Photo T-Shirt

15,99 €* 19,99 € -20%

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Post Malone Red & Blue Photo Tee is equipped with the following features:
• rib crew neck with interior tape
• Post Malone Red & Blue Photo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Presspop Inc.

Sun Ra Pocket T-Shirt

44,99 €*

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

CELEBRATING THE FIRST 110 YEARS OF SUN RA 1914-2024
Pocket t-shirt to commemorate the launch of the SUN RA FIGURINE and the 110th anniversary of his birth.

Officially approved by the © Sun Ra LLC
© Archer Prewitt

The Presspop Inc. Sun Ra Pocket Tee is equipped with the following features:
• rib crew neck with interior tape
• Presspop Inc. Sun Ra Pocket artwork printed on front and back
• regular fit
• 100% cotton single jersey (6.0 oz, GILDAN)

Go to Item

Primal Scream

Screamadelica T-Shirt

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Primal Scream Screamadelica Tee is equipped with the following features:
• rib crew neck with interior tape
• Screamadelica artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Doves T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Doves Tee is equipped with the following features:
• rib crew neck with interior tape
• Doves artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Purple Rain Babygrow

14,39 €* 15,99 € -10%

Available Sizes: 18 MTH, 24 MTH

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Purple Rain Babygrow is a romper suit made from single jersey, equipped with ringer crew neck and ringer bordering, Purple Rain artwork printed on front as well as triple snap button closure at the crotch. 100% cotton.

Go to Item

Purple Rain T-Shirt

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Purple Rain T-Shirt's features include:
• rib crew neck
• Purple Rain artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Purple Rain T-Shirt

27,99 €*

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Purple Rain T-Shirt's features include:
• rib crew neck with interior tape
• Purple Rain artwork printed on front
• regular fit
• 100% cotton single jersey (180 gsm)

Go to Item

Purple Rain Woman T-Shirt

Available Sizes: GIRLS M, GIRLS XL, GIRLS 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Purple Rain Woman Tee is equipped with the following features:
• rib crew neck with interior tape
• Purple Rain artwork printed on front
• slim fit, waisted cut
• 100% cotton single jersey

Go to Item

Sign O' The Times T-Shirt

21,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Sign O' The Times T-Shirt's features include:
• rib crew neck with interior tape
• Sign O' The Times artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Sign "O" The Times T-Shirt

18,99 €* 19,99 € -5%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Sign "O" The Times T-Shirt's features include:
• rib crew neck
• Sign "O" The Times artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Symbol Hoodie

27,99 €* 39,99 € -30%

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Symbol Hoodie's features include:
• drawstring-adjustable hood
• Prince Symbol artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Symbol T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Symbol Tee is equipped with the following features:
• rib crew neck with interior tape
• Symbol artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Symbol Woman T-Shirt

13,99 €* 19,99 € -30%

Available Sizes: GIRLS L, GIRLS XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Symbol Tee is equipped with the following features:
• rib crew neck with interior tape
• Symbol artwork printed on front
• slim fit
• 100% cotton single jersey

Go to Item

Welcome 2 America T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Welcome 2 America Tee is equipped with the following features:
• rib crew neck with interior tape
• Welcome 2 America artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Amp Box S3

284,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Micro audiophile stereo power amplifier

Efficient, audiophile & made in Europe!

The new Amp Box S3 offers one stereo RCA input and delivers powerful and room-filling sound to every loudspeaker. The new PCB concept & sophisticated topology achieves less distortion and a better signal to noise ratio. We designed this amp to match the sound characteristics of a tube amplifier as close as possible. Amp Box S3 brings you a rich and musical sound with an analogue touch of warmth into your living room. It is also the perfect solution for your desktop nearfield monitor speakers due to its size and superior spacious sound stage.

Application examples:
• HiFi Amplifier for 10-15 m2 rooms
• Audiophile desktop nearfield monitor amp
• Streamer power amp upgrade
• Multiroom power amp solution
• Home cinema power amp upgrade
• In-wall or celing speaker amp

The new Amp Box S3 is designed and produced in Europe and is available in a black & silver finish.

Go to Item

Automat A2 (Ortofon 2M Red)

1.199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BT Box E HD

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BT Box S2 HD

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Connect it LS S2 (400cm)

65,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

Connect it Phono RCA-C (123cm)

84,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

Go to Item

Connect it RCA-C (41cm)

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model RCA-C;
• Interconnect cable, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model RCA-C: 41 cm

Go to Item

Debut Carbon EVO (Ortofon 2M Red)

569,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

Go to Item

Debut PRO White Edition (Ortofon 2M White)

799,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raises the bar even higher.

A MILESTONE FOR THE NEXT DECADES
The Debut PRO brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.
The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality.

The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function.

DEEPLY DRIVEN
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.

A NEW PLATTER – A DEEPPER DISH
The new Debut PRO platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO has to offer!
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO.

HYBRID TONEARM
The new Debut PRO features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges!

AZIMUTH & VTA ADJUSTMENT
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

Features:
Pick it PRO
Lively and robust sound
The perfect combination of components is the key to achieve the great sound of the Pick it PRO.

Nickel Coating
Sustainable components
The nickel finish of the aluminium components results in a hard, resistant surface.

Hybrid Tonearm
Carbon Aluminium Sandwich
This super stiff and uniquely dampened tonearm ensures perfect tracking of the record groove.

VTA & Azimuth
Fully adjustable
The Debut PRO comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.

33/45/78 RPM
High precision motor control
The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.

Bearing block
Complete new design
The precision CNC milled and nickel coated tonearm bearing parts are completely new and designed just for the PRO.

Special Platter
TPE damped & anti magnetic
The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.

Metal Feet
Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Technical Specifications:
• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt drive with electronic speed control
• Platter: 300mm, die cast aluminium platter with TPE damping and felt mat
• Platter bearing: high precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
• Speed drift: 33: +/-0,40%; 45: +/-0,50%
• Signal to noise: 68dB
• Tonearm: 8,6” one-piece carbon-aluminium tonearm
• Effective arm length/mass: 218,5 mm / 10,0 g
• Overhang: 18,5mm
• Included accessories: 15V DC / 0,8A power supply, dust cover, 78 RPM round belt, 7‘‘ single adapter
• Power consumption: 4W / 0W standby
• Dimensions: 415 x 113 x 320mm (WxHxD)
• Weight: 6 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2021/07/PJ-Phono-DebutPro-Manual.pdf

Go to Item

E1 BT (Ortofon OM 5E)

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 BT (Ortofon OM 5E)

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ground it deluxe 1

449,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Equipment base

Ground it deluxe 1 suitable for:
• Xtension 9 Evolution, Xtension 10 Evolution, Xtension 12 Evolution
• Signature 10
• RPM 1 Carbon, RPM 3 Carbon, RPM 5 Carbon, RPM 9 Carbon, RPM 10 Carbon

Features:
• Resonance free placement for turntables & hifi
• Heavy weight base filled with granular damping
• 2 models with adjustable spikes (3 or 4 may be fitted)
• 1 model with height adjustable magnetic feet
• Dark grey piano lacquer finish
• Matches charcoal finish of Pro-Ject turntables

Technical Specifications:
• Dimensions: 500 x 65 (45)x 400 mm incl spikes (without spikes)
• Weight: 11,6 kg

Go to Item

Ground it E

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Equipment base

Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vib-rations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.

Suitable for:
• Elemental Line
• Essential Line
• Debut Line
• 1Xpression Carbon
• 1Xpression Carbon Classic
• RPM1 Carbon
• RPM3 Carbon

Features:
• Support platform for many turntables or other equipment
• Prevents the transmission of vibrations
• Heavy-weight MDF
• Conical feet with damping ring
• Height adjustable
• Combinable with Cover it E and Cover it RPM 1/3 Carbon
• High gloss piano finish

Technical Specifications:
• Dimensions: 480 x 51 x 390 mm spike feet incl.
• Weight: 4 kg

Go to Item

Hear it two

59,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Trendy headphone for iPod & Co

super loud, super lightweight & super cool

A cool headphone for the best possible sound reproduction of portable players, like iPod & Co. Hear it Two offers far better audio quality with higher sound pressure levels and superior looks, than many others. Soft and comfortable ear-cushions are swivel mountedmaking it easy to transport Hear it Two in a flat carry case. A high-quality signal-cable made from oxygen-free copper (HP-OFC) with bending protection and gold-plated jack-plug guarantees trouble free performance. Hear it headphones prove again, that outstanding quality does not need to be expensive.

Features:
• Super loud – super light – super cool
• more SPL with iPod & Co (107 dB)
• Lightweight design (77 g)
• adjustable ear-cushion position
• flat transport possible
• high wear comfort
• 3.5 mm jack plug

Technical Specifications:
• Transducer: 30 mm Neodymium driver (dynamic)
• Head-band: adjustable
• Frequency response: 18-22.000 Hz
• Cable material: HPOFC
• Cable length: 1.2 m
• Sensitivity: 107 dB @ 1mW
• Max. sound pressure level: 130 dB
• Impedance: 32 ohms
• Maximum input power: 50 mW
• Connector: 3.5 mm jack plug
• Weight (without cable): 77 g

Go to Item

High Power it

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Juke Box E1 (Ortofon OM 5E)

649,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MaiA DS3

1.199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MaiA S3

569,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Phono Box E

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Phono preamplifier

Phono Box E: Pure vinyl listening pleasure at an absolute bargain price!

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.

Features:
• Amplification and RIAA equalisation for MM cartridges
• Design principle inspired by Dr. Sykora
• SMD circuitry
• Special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black casing

Technical Specifications:
• Input impedance: 47 kohms
• Input capacitance: 120 pF
• Gain: 40 dB
• Output voltage(typically): 500mV/ 1kHz at 5mV/1kHz
• Noise floor: 88 dB (A weighted)
• THD: <0,05%
• RIAA deviation: deviation max. 0.5 dB/ 20 Hz - 20 kHz
• Input: 1 pair RCA socket
• Output: 1 pair RCA socket
• Outboard power supply: 18 V/500 mA DC; 220 - 240 V, 50 Hz
• Standby power consumption: < 1 watt
• Power consumption: 20 mA DC
• Dimension W x H x D (D with sockets): 120 x 32 x 100 (106) mm
• Weight: 269 g without power supply

Go to Item

Phono Box MM (Phono-Vorverstärker)

79,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MM Phono Pre-amplifier

Good sound from sound technology
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)

Features
• Amplification and RIAA equalisation for MM cartridges
• Small size allows installation close to record player

107x36x104 (115)mm

Manual: http://www.project-audio.com/inhalt/en/manual/manual_phonoboxmm.pdf

Go to Item

Phono RCA-C (185cm)

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Phono RCA-C (82cm)

75,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

Plattenpuck

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

Go to Item

Power Box S3 Phono

179,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Primary E Phono (Ortofon OM)

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

Go to Item

Primary E Phono (Ortofon OM)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Go to Item

Q UP

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RCA-C (123cm)

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RCA-C (20,5cm)

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

RCA-CC (82cm)

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Speaker Box 3E Carbon (Paar)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Speaker Box 3E (Paar)

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Speaker Box 5 (Paar)

279,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2-way bookshelf speakers

And these are comments from audio testers:
• Well tuned and upbeat basslines
• Lively dynamics
• Surprisingly low coloration
• Good transparency and reasonable image depth
• Bass is fast and tuneful, this is what really matters!

Scope of delivery:
• 2x Speaker Box 5
• 2x speaker grill black
• 1x pair of gloves

Features:
• Audiophile bass-reflex design
• Gold-plated speaker terminal (single-wired)
• Simple Wall-mount included
• Magnetically shielded
• Front cover with magnetic attachment
• Speaker-Box Wall Bracket available as an option

Technical Specifications:
• Sensitivity (1W/1m): 86 dB
• Recommended amplifier power: 10 to 150 watts
• Tweeter: 25 mm Ø silk-dome Neodymium magnet
• Woofer: 130 mm Ø fiberglass cone
• Frequency response: 55 Hz - 20 kHz
• Impedance: 4 - 8 Ohms
• Dimensions: W x H x D 160 x 255 x 210 mm
• Weight: 4.2 kg

Go to Item

Speaker Box 5 S2 (Paar)

649,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sub 50

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sweep it E

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

Go to Item

T1 BT (Ortofon OM 5E)

474,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

Go to Item

T1 (Ortofon OM 5E)

350,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Go to Item

T1 Phono SB (Ortofon OM 5E)

426,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Go to Item

T2 W (Sumiko Rainier)

999,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Tube Box S2

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Go to Item

Typ 6S Rundriemen

26,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Typ 8W Rundriemen

26,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Typ 9S Rundriemen

26,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Vinyl NRS Box S3

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wallmount it 1

229,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 1 on solid walls, such as Brick.

Features:
• Resonance-free wall mount for turntables & Hifi
• Playback of records free from any influence by impact noise and vibrating floors
• WMI wall mounts use rigid steel frame construction
• Height-adjustable spikes to level the board
• Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 90 x 415 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

Go to Item

Wallmount it 2

249,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

Go to Item

Wallmount it 3

449,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

Go to Item

Wallmount it 5

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Go to Item

X1 (Pro-Ject Pick it S2 MM)

854,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Go to Item

X1 (Pro-Ject Pick it S2 MM)

854,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

X2 B (Ortofon MC Quintet Red)

1.519,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

X2 B (Ortofon MC Quintet Red)

1.519,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

X2 (Pro-Ject Pick it 2M Silver)

1.234,00 €*

Bonita's Fresh Apples T-Shirt

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Uncompromised heavyweight design combined with high-end features. The big brother of our X1 sets new standards.

Real high-end features.

Azimuth & VTA - Fully adjustable
The X2 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X2 as you want it.

Pick it 2M Silver - High-end cartridge
This cartridge uses internal silver plated copper coils, which guarantees outstanding sonic results! The X2 is available with or without the Pick it 2M Silver.

2 kg Platter - Resonance free acryl
The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character.

33/45/78 RPM - High precision motor control
A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button.

New motor suspension
A good motor by itself, is already very quiet. To get the best performance out of it, we have improved the motor suspension. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt - this way the motor chassis is effectively decoupled from the main plinth for optimal performance.

The Tonearm - 9'' Carbon-Aluminium Tonearm
Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight.
Compared with its little brother the X1, the tonearm is longer - 9“ in length - and the tube has a wider diameter. The carbon/aluminium sandwhich construction results in better internal damping. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges.

Metal Feet - Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Phono Cable - Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Technical Specifications:
•Speed: 33, 45, 78 (electronic speed change)
•Principle: belt drive
•Speed variance: 33: 0.25% 45: 0.20%
•Wow & flutter: 33: 0.12% 45: 0.10%
•Signal to noise: 70 dB
•Platter: 30mm thick, 2 kg heavy acryl
•Main bearing: stainless steel/brass
•Tonearm: 9” carbon/aluminium sandwich
•Effective arm length: 230 mm
•Overhang: 18 mm
•Effective tonearm mass: 13,5g
•Tracking force range: 0 - 30mN
•Included accessories: 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
•Power consumption: 4,5 watts max / 0.3 watt standby
•Dimensions: 460 x 150 x 340 mm (WxHxD)
•Weight: 10 kg

Manual: https://www.project-audio.com/wp-content/uploads/2021/01/X2-Manual.pdf

Go to Item

Project 96 x Okayplayer

30,39 €* 37,99 € -20%

Available Sizes: S, M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Project 96 x Okayplayer Bonita's Fresh Apples Tee is equipped with the following features:
• rib crew neck with interior tape
• Bonita's Fresh Apples artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Prop Dylan

All Classics 5-Panel Cap

35,99 €* 39,99 € -10%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For ages, a headgear item like the Prop Dylan All Classics five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Prop Dylan All Classics 5-Panel Cap is equipped with the following features:

• Prop Dylan All Classics branding embroidered on front panel
• metal eyelets at vent holes
• adjustable nylon strap with side-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 100% cotton

Go to Item

4Logos T-Shirt

20,99 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Public Enemy 4Logos Tee is equipped with the following features:
• rib crew neck with interior tape
• 4Logos artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Logo Hoodie

39,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Public Enemy Logo Hoodie´s features include:
• drawstring-adjustable two-layer hood with metal eyelets
• Public Enemy Logo printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• additional PE crosshairs logo printed on left sleeve
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Logo T-Shirt

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Public Enemy Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Public Enemy Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Solid Target Snapback Cap

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Public Enemy Solid Target Snapback Cap is an adjustable hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by the Foo Fighters merch department.

Public Enemy Solid Target Snapback Cap - Features:

• 6-panel construction
• Public Enemy Logo embroidery on front & side
• tonal eyelet stitching
• curved visor
• 7 eye snapback plastic closure at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill

Go to Item

Covered Parachute Document Bag

54,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Covered Parachute Document Bag by Puebco is a bag made from a used parachute coated with vinyl. The parachute fabric has minimal tears, holes, stains, scratches and faded areas, as well as individual differences in color and texture - all this makes every single piece of the Puebco Covered Parachute Document Bag unique. Due to the nature of the material, vinyl parts can become soft and sticky at high temperatures or harden and become fragile at low temperatures. Dimensions: approx. 29 x 33.5 x 10.5 cm; Materials: used nylon or polyester fabric, PVC.

Go to Item

Glasses Tray Round

9,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Losing your glasses is a thing of the past, thanks to the Glasses Tray Round by Puebco. Crafted from ceramic with a vintage aesthetic, this Puebco Glasses Tray features a round silhouette to perfectly place your specs onto and is complete with glazed lettering and a smooth finish adding to its minimal design. Dimensions: approx. 18 x 7.5 x 2.5 cm. 100% ceramic.

Go to Item

Marble Incense Holder Oval

14,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made in Japan, this Marble Incense Holder by Puebco is an oval-shaped holder for incense sticks that measures approximately 100 x 20 x 85 mm.

Go to Item

Marble Pet Bowl

29,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Puebco Marble Pet Bowl is a sturdy food bowl made of marble. Dimensions: approx. ø130 x 45 mm.

Go to Item

Plastic Connectable Tool Box

12,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Puebco Plastic Connectable Tool Box is a compact and durable organizer that has a wide range of functionality, thanks to its sectioned compartments. It's also equipped with sturdy snap attachments to extend its storage capabilities and a fold-a-way carrying handle. Dimensions: approx. 25.5 x 6.5 x 15 cm; 100% recycled Polyester.

Go to Item

Pulp Fiction

Bad M Fucker T-Shirt

7,99 €* 19,99 € -60%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Pulp Fiction Bad M Fucker T-Shirt's features include:
• rib crew neck with interior tape
• Bad M Fucker artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Clyde Base L

54,97 €* 99,95 € -45%

Available Sizes: EU 41, 42, 42½, 44

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Established in the early 1970s, the Puma Clyde is a legendary basketball low-top shoe co-developed by no less than NBA all-time great, Mister Walt "Clyde" Frazier. This world-famous footwear icon still kicks it with the minimalist design, clean and stylish lines, and an old school-inspired in-ya-face approach. While technology changed over the years, the Puma Clyde Base L stays true to its roots and keeps it real with purist aesthetics. Time to blow the dust off your old school boom box to pump the "Critical Beatdown" tape and do some breakdance moves at the street corner, b-boys 'n' b-girls!

Puma Clyde Base L - features:

• eco-friendly leather upper with hairy contrast heel panel including covered "window"
• synthetic leather lining
• Puma Formstripe suede appliqués at side panels
• foam-padded insole
• flexible rubber sole construction
• leather label with tone-on-tone embossed Puma Clyde Signature at leather tongue

Go to Item

Clyde Neverworn III

60,47 €* 109,95 € -45%

Available Sizes: EU 44, 44½, 45, 48½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Clyde Neverworn III, Puma has created another tribute to an important design from the archive. By the way, the traces of glue are intentional to emphasize the special character of this model.

Established in the early 1970s, the Puma Clyde is a legendary basketball low-top shoe co-developed by no less than NBA all-time great, Mister Walt "Clyde" Frazier. This world-famous footwear icon still kicks it with the minimalist design, clean and stylish lines, and an old school-inspired in-ya-face approach. While technology changed over the years, the Puma Clyde stays true to its roots and keeps it real with purist aesthetics. Time to blow the dust off your old school boom box to pump the "Critical Beatdown" tape and do some breakdance moves at the street corner, b-boys 'n' b-girls!

Puma Clyde Neverworn III - features:

• durable leather upper
• synthetic leather lining
• Puma Formstripe hairy suede appliqués at side panels
• foam-padded insole
• flexible rubber sole construction
• Puma woven label at tongue
• Puma Clyde signature branding at side panel

Go to Item

Clyde OG

54,97 €* 109,95 € -50%

Available Sizes: EU 43, 44½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Established in the early 1970s, the Puma Clyde OG is a legendary basketball low-top shoe co-developed by no less than NBA all-time great, Mister Walt "Clyde" Frazier. This world-famous footwear icon still kicks it with the minimalist design, clean and stylish lines, and an old school-inspired in-ya-face approach. While technology changed over the years, the Puma Clyde stays true to its roots and keeps it real with purist aesthetics. Time to blow the dust off your old school boom box to pump the "Critical Beatdown" tape and do some breakdance moves at the street corner, b-boys 'n' b-girls!

Puma Clyde OG - features:

• soft suede upper
• synthetic leather lining
• Puma Formstripe suede appliqués at side panels
• foam-padded insole
• flexible rubber sole construction
• Puma woven label at tongue
• Puma Clyde signature gold foil branding at side panel

Go to Item

Clyde OG

43,98 €* 109,95 € -60%

Available Sizes: EU 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Clyde Premium

65,97 €* 119,95 € -45%

Available Sizes: EU 44, 45, 48½

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Established in the early 1970s, the Puma Clyde Premium is a legendary basketball low-top shoe co-developed by no less than NBA all-time great, Mister Walt "Clyde" Frazier. This world-famous footwear icon still kicks it with the minimalist design, clean and stylish lines, and an old school-inspired in-ya-face approach. While technology changed over the years, the Puma Clyde Premium stays true to its roots and keeps it real with purist aesthetics. Time to blow the dust off your old school boom box to pump the "Critical Beatdown" tape and do some breakdance moves at the street corner, b-boys 'n' b-girls!

Puma Clyde Premium - features:

• premium leather upper with hairy suede heel panel
• synthetic leather lining
• Puma Formstripe leather appliqués at side panels
• foam-padded insole
• flexible rubber sole construction
• leather label with embossed Puma Clyde Signature at hairy suede tongue
• Clyde signature tonal branding embossed at side panel

Go to Item

Delphin

67,46 €* 89,95 € -25%

Available Sizes: EU 37, 37½, 38, 38½, 39, 40, 40½, 41, 42, 42½, 43, 44, 44½, 45, 46

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Introduced in 1977, the Puma Delphin is one of the brand's iconic designs that offer a very clean down-to-earth look highlighted by trademark details and some old school technology details. If you're into authentic retro kicks, you definitely love these low-tops!

Puma Delphin - features:

• suede upper(the leather was produced in an environmentally conscious manner and tested and certified in accordance with the Leather Working Group's specifications)
• soft and breathable fabric lining
• Puma Formstripe leather appliqués at side panels
• foam-padded insole with diagonal Puma repeat branding
• Puma Contact midsole
• cupsole construction made from abrasion-resistant rubber
• Puma woven label at tongue
• Puma Delphin gold foil branding embossed at side panel

Go to Item

Easy Rider Nylon

109,95 €*

Available Sizes: EU 40½, 41, 42, 42½, 43, 44, 44½, 45, 46, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Back in the 1970s, the Puma Easy Rider was one of the brand’s most prominent running shoes - a lightweight design with EVA foam cushioning at the midsole plus the signature lug outsole. For the current season, Puma reintroduced the Easy Rider Nylon in its original form with some authentic colorways.

Puma Easy Rider Nylon - features:

• nylon weave upper with hairy suede overlays
• soft and breathable fabric lining
• EVA foam midsole for lightweight cushioning
• lug outsole made from abrasion-resistant rubber
• Puma Formstripe leather appliqué at side walls
• Puma woven label at textile tongue
• Puma Easy Rider gold foil branding embossed at side walls
• Puma gold foil logo embossed on heel patch

Go to Item

Football Jersey

32,47 €* 64,95 € -50%

Available Sizes: M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Puma Football Jersey is equipped with the following features:
• color-blocked cut and sew construction
• ribbed V neck with interior tape
• raglan sleeves
• Puma branding printed on chest
• extended rear panel with curved bottom hem
• relaxed fit
• jacquard fabric made of 100% polyester with miDori® bioWick coating and dryCELL performance technology that wicks moisture away from the body
• ribbed details: 93% polyester, 7% elastane

Go to Item

GV Special Base

82,46 €* 109,95 € -25%

Available Sizes: EU 40½, 41, 42, 42½, 43, 44, 44½, 45, 46, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In the 1970s, Argentinian tennis player Guillermo Vilas enjoyed incredible success. He mastered every surface on the court and was prepared for every serve. Off the court, he was equally renowned for his confidence and charisma. In the 1980s it was time for his outfitter Puma to create a Guillermo Vilas signature shoe: The GV Special, which pays tribute to its namesake with a court-meets-street aesthetic that's iconic to this day. The silhouette of the Puma GV Special is equipped with perforated detailing for breathability, plus a chunky sole. Today, the Puma GV Special has been upgraded with timeless retro colorways, premium leather upper as well as maximized comfort.

Puma GV Special Base - features:

• leather upper with perforated toe box (Puma supports responsible leather sourcing through the Leather Working Group)
• synthetic leather lining
• Formstripe leather appliqués at side panels
• foam-padded insole
• EVA foam midsole
• abrasion-resistent rubber outsole
• Puma woven label at tongue
• Puma GV Special branding embossed at side wall
• tonal Puma logo embossed at heel overlay's window

Go to Item

Palermo Leather

76,45 €* 89,95 € -15%