All Items 6048 Items

Vintage Fit Black Flannel Shirt

Available Sizes: 4 (35)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The orSlow Men's US Army Fatigue Pants are equipped with the following features:
• 4-pocket Japanese twill construction
• tonal front center button
• button fly
• 2 large self-fabric patch pockets at front
• adjustable button straps at waistband
• 2 self-fabric flap pockets with tonal buton closure at the rear
• tonal stitching
• regular waist, tapered legs
• relaxed fit
• 100% cotton Japanese reverse sateen twill inspired by original US Army fabric with stone wash finish
• made in Japan

Go to Item

orSlow

289,95 €*

Available Sizes: 2 (S), 3 (M), 4 (L)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

orSlow Vintage Fit Black Flannel Shirt - features:
• turn-down collar
• button front closure
• dual self-fabric flap pockets with button closure at chest
• curved bottom hem
• button cuffs
• back yoke
• orSlow woven label at the bottom of the button placket
• relaxed fit
• Japanese flannel made from 100% cotton
• made in Japan

Go to Item

Commuter-Daypack City 21L

119,96 €* 149,95 € -20%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In the Ortlieb Commuter Daypack City 21L fits everything, no matter where and how you will spend your day. The Commuter Daypack City by Ortlieb is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll-up closure, large main compartment and padded notebook compartment (up to 15.4), it's a safe place for documents and technical devices in any weather - and thanks to its tremendous carrying comfort, it's a pleasant companion that offers the utmost comfort.

Ortlieb Commuter Daypack City 21L - more features/details:

• Reinforced bottom
• Back padding with ventilation channels
• Removable chest and hip belt
• Zippered front pocket (not waterproof)
• Loops for rear light or U-lock
• Reflective thread and reflective logo for more protection in the dark
• dimensions notebook inner compartment: 39 x 27 x 2,5 cm
• Weight: 750 g
• Dimensions: approx. 30 x 50 x 15,5 cm
• Capacity: 21 liters
• Material: 100% nylon, waterproof

Go to Item

Commuter-Daypack City 27L

159,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In the Ortlieb Commuter Daypack City 27Lfits everything, no matter where and how you will spend your day. The Commuter Daypack City by Ortlieb is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll-up closure, large main compartment and padded notebook compartment (up to 17 inch), it's a safe place for documents and technical devices in any weather - and thanks to its tremendous carrying comfort, it's a pleasant companion that offers the utmost comfort.

Ortlieb Commuter Daypack City 27L - more features/details:

• Reinforced bottom
• Back padding with ventilation channels
• Removable chest and hip belt
• Zippered front pocket (not waterproof)
• Loops for rear light or U-lock
• Reflective thread and reflective logo for more protection in the dark
• Weight: 800 g
• Dimensions: approx. 32 x 50 x 21 cm
• Capacity: 27 liters
• Material: 100% nylon, waterproof

Go to Item

Daypack Metrosphere 21L

189,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made for your journey between two worlds, whether business or outdoor, the Ortlieb Daypack Metrosphere cuts a fine figure in either realm. The padded laptop compartment ensures the safe storage of hardware while the proven roll-top lets you quickly and easily access the equipment. In addition to a slip-in pocket for an address card, everything you need quick access to on the go can be stowed in the two zippered exterior pockets. Of course, even bad weather on the way to the next pitch is no longer a problem, because the lightweight, robust daypack is waterproof. The entire Metrosphere line from Ortlieb is sustainably manufactured in Germany.

Ortlieb Daypack Metrosphere 21L - details/features:

• waterproof outdoor backpack and travel bag
• quick, easy-access thanks to large opening allows easy packing
• waterproof TiZip zipper (revised version / position on the back protects against unauthorized access
• waterproof passage for drinking tube (drinking system not included)
• ergonomic, adjustable and padded shoulder straps
• shoulder straps and carrying system stay clean and dry while packing
• wide, padded hip belt with side mesh pockets secured by zippers
• 2 mesh pockets for e.g. water bottles etc.
• daisy chain tape on the front for attaching additional gear
• 4 interior pockets with zipper for clear organization
• padded laptop compartment (39 x 27 x 2,5 cm) with organizer function and zippered pocket
• dimensions: approx. 30 x 50 x 15.5 cm
• capacity: 21 liters
• weight: approx. 1.380 g
• maximum load: 8 kg
• material: tear and abrasion resistant fabric made of 100% nylon

Go to Item

Duffle 60L

164,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Anyone who likes to explore the extremes in life, expects corresponding stamina from his equipment. The Ortlieb Duffle guarantees the waterproof transport of clothing and other stuff and can also be carried as a practical backpack, thanks to its comfortably padded shoulder straps, which can also be used as carrying handles. The long TiZip zipper allows quick access to the contents, whose pack size can be further reduced with the internal compression strap. The reinforced bottom of the Ortlieb Duffle is made from abrasion-resistant Cordura fabric, which makes the bag a durable expedition companion.

Ortlieb Duffle 60L - details/features:

• waterproof heavy-duty construction with backpack function
• padded, removable shoulder straps, can be used as carrying handle
• extremely abrasion and tear resistant fabric
• long, waterproof TiZip zipper (revised version) at the opening of the main compartment for easy access
• 1 compression strap inside for volume adjustment
• 2 inside pockets with zip closure
• 1 mesh compartment with zipper on the outside
• 2 daisychains for attaching additional gear
• bag can be locked with a small padlock via wire shackle on zipper (lock not included)
• dimensions: approx. 58 x 29 x 33 cm
• capacity: 60 liters
• materials: PD620 & PS620C made of 100% polyester

Go to Item

Duffle 60L

184,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Duffle 85L RS

319,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ortlieb Duffle RS combines high travel comfort with the extreme demands of expedition bags. For the increased requirement of heavy-duty use, a roller system was developed that is integrated waterproof into the body of the bag. The 100 mm wheels, together with the stiffened base plate made of profiled aluminum, provide optimum ground clearance, which is the ideal prerequisite for transport off paved roads. Since lightweight luggage plays an important role, especially when traveling by air, the Ortlieb Duffle RS was deliberately designed without a heavy telescopic linkage - instead, a length-adjustable handle is used, which ensures comfortable pulling behind with high legroom. The full foam padding at the bottom of the Ortlieb Duffle RS bag provides the best stability when fully loaded. Quick access to the equipment allows the waterproof TiZiP zipper running the entire length of the bag, which can be locked using the integrated wire shackle and a small cable lock, which is not included here.

Ortlieb Duffle 85L RS - details/features:

• waterproof heavy-duty construction with backpack function
• extremely abrasion and tear resistant fabric
• long, waterproof TiZip zipper (revised version) at the opening of the main compartment for easy access
• padded, removable shoulder straps can be used as carrying handle or with backpack function
• compression strap
• inside pocket with zip closure
• mesh compartment outside
• 4 holding straps for attaching further equipment
• bag can be locked with a small padlock via wire shackle on zipper (lock not included)
• dimensions: approx. 73 x 29 x 45 cm
• capacity: 85 liters
• weight: 2,790 g
• materials: PD620 & PS620C made of 100% polyester

Go to Item

Messenger-Bag

129,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ortlieb Messenger-Bag is the courier bag for the professionals. A striking design, robust functionality and an excellent carrying system make this bag a classic - not only for bicycle couriers. The Ortlieb Messenger-Bag is tough and smart enough for the urban jungle. It inspires with its slim, functional design, the waterproof tarpaulin material that defies all weather conditions and the practical roll-top, which allows a flexible packing height for a total volume of 39 liters. The ventilated foam back and waist and chest straps allow for a comfortable fit close to the body, and for increased safety in road traffic - especially in bad weather and in the dark - the contoured shoulder straps with reflective stripes and the 3M Scotchlite reflectors on the sides.

Ortlieb Messenger-Bag - details/features:

• waterproof messenger bag with comfortable carrying system
• ideal for professional courier services
• tight fit on the back due to hip belt
• adjustable, padded and ergonomically shaped shoulder straps with reflective stripes
• adjustable sternum strap
• adjustable hip belt
• foam padded back for maximum comfort
• edge protection at the lower corners on the back prevents chafing
• quick access and good fillability through roll-top
• internal organizer panel
• black Cordura perimeter for better abrasion and kink resistance
• side-mounted 3M Scotchlite reflectors for increased safety
• can also be used as a backpack for large formats (e.g. drawings)
• dimensions: approx. 39 x 50 x 15 cm
• capacity: 39 liters
• weight: approx. 1,300 g
• maximum load: 14 kg
• material: PD620 & PS620C made of 100% polyester

Go to Item

Messenger-Bag

129,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Velocity 17L

99,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Inspired by messenger bags, the Ortlieb Velocity backpack has been one of the most popular of the brand for many years. This backpack is simply one of the best of its kind, whether for study, sports or leisure. The Ortlieb Velocity is rugged and waterproof, and its special trademark is the distinctive back padding that provides great rear ventilation. Now the carrying system, especially the shoulder straps, has been ergonomically optimized for the benefit of an even more comfortable carrying feel. The hip belt is easily adjustable or completely removable. Access and packing are as easy as can be, thanks to the roll top with hook and loop fastener. Whether in large or small, the Ortlieb Velocity is a purchase for life!

Ortlieb Velocity 17L - Features/Details:

• sturdy bag bottom with edge protection and parking feet.
• chest and waist strap (removable)
• removable inner pocket with laptop compartment
• carrying handle
• edge protection at the back bottom corners
• bracket for optional tail light or helmet
• weight: 880 g
• dimensions: approx. 28 x 45 x 14 cm
• capacity: 17 liters
• material: PU-coated fabric

Go to Item

Velocity 23L

119,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Inspired by messenger bags, the Ortlieb Velocity backpack has been one of the most popular of the brand for many years. This backpack is simply one of the best of its kind, whether for study, sports or leisure. The Ortlieb Velocity is rugged and waterproof, and its special trademark is the distinctive back padding that provides great rear ventilation. Now the carrying system, especially the shoulder straps, has been ergonomically optimized for the benefit of an even more comfortable carrying feel. The hip belt is easily adjustable or completely removable. Access and packing are as easy as can be, thanks to the roll top with hook and loop fastener. Whether in large or small, the Ortlieb Velocity is a purchase for life!

Ortlieb Velocity 23L - Features/Details:

• sturdy bag bottom with edge protection and parking feet.
• chest and waist strap (removable)
• removable inner pocket with laptop compartment
• carrying handle
• edge protection at the back bottom corners
• bracket for optional tail light or helmet
• weight: 880 g
• dimensions: approx. 30 x 50 x 16 cm
• capacity: 23 liters
• material: PU-coated fabric

Go to Item

Velocity PS 23L

124,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Inspired by messenger bags, the Ortlieb Velocity PS backpack has been one of the most popular of the brand for many years. This backpack is simply one of the best of its kind, whether for study, sports or leisure. The Ortlieb Velocity PS is rugged and waterproof, and its special trademark is the distinctive back padding that provides great rear ventilation. Now the carrying system, especially the shoulder straps, has been ergonomically optimized for the benefit of an even more comfortable carrying feel. The hip belt is easily adjustable or completely removable. Access and packing are as easy as can be, thanks to the roll top with hook and loop fastener. Whether in large or small, the Ortlieb Velocity PS is a purchase for life!

Ortlieb Velocity PS 23L - Features/Details:

• sturdy bag bottom with edge protection and parking feet.
• chest and waist strap (removable)
• removable inner pocket with laptop compartment
• carrying handle
• edge protection at the back bottom corners
• bracket for optional tail light or helmet
• weight: 790 g
• dimensions: approx. 30 x 50 x 16 cm
• capacity: 23 liters
• material: PVC-free PS33 fabric made from 100% nylon

Go to Item

10 Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Stylus 10 - technical data:

• Frequency range 20-24.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 25 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Tracking force range 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended 1.5 g (15 mN)
• Tracking angle 20°
• Stylus color Black
• Recommended for following cartridges: Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, TM 10H, LMB 12, SMB 12, LMA 12, Concorde STD, Dual ULM 65E, Dual ULM 66E

Go to Item

2M 78

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2M 78 features an improved engine, which provides a high level of sonic accuracy. The stylus' tip is a Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile. The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M 78 uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.

The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M 78 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 18 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 65 µm
• Tracking force range - 1.6-2.0g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Internal impedance, DC resistance - 700 Ohm
• Internal inductance - 350 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Tracking angle - 20°
• Cartridge colour, body/stylus - Black/Grey
• Cartridge weight without screws - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M 78 (interchangeable with 2M Mono)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

Go to Item

5E Stylus

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical data
Frequency range
20-25.000 Hz
Frequency response
20-25.000 Hz
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges OM 5E, OMP 5E, OMB 5E, OMT 5E

Go to Item

"Cause I Can Do It In The Mix" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII CLUB Single

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

Video: https://youtu.be/WZnFkEwAnCo

Go to Item

Concorde MkII CLUB Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII CLUB Twin

329,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII Elite Single

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Concorde Elite is a premium moving magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Created with passion, combined with technology and close attention to detail, every feature of the Concorde Elite brings you a limitless experience with the music you love.

We have created a cartridge characteristic of Ortofon’s pioneering approach to design and years of extensive knowledge of reproducing music as it was meant to be heard. Owing to the upgrades of components, the Elite achieves a new level of sound quality not previously found in DJ categorized cartridges.

The Concorde Elite features a new, special-molded stylus body with real gold plating. Encased by the gold is a Nude Elliptical diamond mounted on a rigid Aluminum-Magnesium cantilever. The nude diamond stylus, you normally will find in HiFi cartridges, delivers a sound so powerful and detailed, you will experience a remarkable level of live performance.

The properties of the Rigid 750 µm Aluminum-Magnesium Cantilever, exclusively developed for the Concorde Elite, ensure that the stylus picks up the groove vibrations with a stable and accurate trace performance, and provides the ideal interface between the stylus and armature.

In the armature, you’ll find a Unique Coil System transmitting the diamond’s movements to deliver an optimized output. The engineering of the coil system provides the Elite with a powerful, full-bodied sound of high quality and high output.

To ensure superior tracking performance, a new Rubber Suspension has been developed. The new rubber compound formula has been developed uniquely for the Concorde Elite to attain the desired characteristics for an extraordinary performance of the cartridge.

Output voltage at 1000 Hz, 5cm/sec. - 8,5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3 dB - 20 – 20,000 Hz
Tracking ability at 315Hz - 100 μm
Compliance, dynamic lateral - 13 μm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 μm
Tracking force range 2.0-4.0 g
Tracking force recommended - 3.0 g
Tracking angle - 20°

Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 800 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-400 pF
Cartridge weight excluding screws - 18.5 g
Cartridge colour (body/stylus) - Black / Gold

Go to Item

Concorde MkII Elite Stylus

299,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Concorde MkII Elite Cartridge.

Go to Item

Concorde MkII Fingerlift

9,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Go to Item

Concorde MkII MIX Single

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

Go to Item

Concorde MkII MIX Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII MIX Twin

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Flight Case CC Twin MkII

24,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Flight case for Ortofon Concorde MkII

Go to Item

GT Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Go to Item

"In ViNyL We Trust" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome 3D design
The VNL 3D design is developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

The slipmat design uses several elements linked to the DJ culture:
• Scissors stand for "Cutting sounds"
• Equalizer levels picture refers to the mixers' levels
• Spiral symbolises turntable platter when spinning

The effect of animation is fully obtainable when the pitch is set to 33 +8.

Go to Item

LH-2000 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Go to Item

LH-4000 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

Go to Item

Night Club MKII E/E Ersatznadel

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM 5E

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

OM 5S

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

OM PRO S x SH-4 Headshell Black

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Pro S pre-mounted on SH-4 Black
The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

OM Pro S technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 5 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5,0 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g
Replacement stylus unit - Pro S

Go to Item

OM Qbert x SH-4 Headshell Black Printed

139,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Q.Bert pre-mounted on SH-4 Black headshell
The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Ultra high output
• Low wear characteristics

Tailored specifically for scratch, the OM Q.Bert provides unrivaled tracking ability and sonic characteristics.

Technical Data:
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Go to Item

Pro S Stylus

35,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Entry-level cartridge for all-purpose use

New DJ? This entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

Go to Item

Pro Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

General purpose model for scratch and back-cueing

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for. It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
PRO cartridge weight
18,5 g

Go to Item

Q-Bert Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by DJ Q.Bert for scratch and back-cueing. High tracking ability. Ultra high output

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own.

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Output voltage at 1000Hz, 5cm/sec.
11 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
•
Frequency range at -3dB
20-18.000 Hz
Frequency response
20-18.000 Hz -3 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.680 Ohm
Internal inductance
920 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-400 pF
Cartridge weight
18,5 g

Go to Item

Record Brush

29,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

The Ortofon Record Brush is designed by the Danish Industrial designer Møller Jensen Innovation and Design – the same company who designed the award winning vintage MC Jubilee cartridge, historical Kontrapunkt Series, 2M Series and the Concorde MkII range.

Cleaning your records before every use increases the lifetime of the diamond and improves your listening experience. The Ortofon Record brush safely and effectively removes dust and dirt from the record surface without scratching. • The brush features two rows of tightly bound carbon fiber bristles that are designed to remove dirt and dust from the record surface. Simply brush around the surface of a record after placing it on the turntable.
• Simple and robust two parts design: Injection moulded part uses a conductive plastic preventing any static charges. Shield used to clean and protect the brush.
• Easy to use: slides and locks into place.
• Embossed details for clarity and performance.
• Lanyard hole for convenience and store.

Go to Item

Record Stabilizer

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Go to Item

Record Stabilizer Heavy

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Record Stabilizer Heavy - Black - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Go to Item

SH-4 Headshell

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

Go to Item

"Smash The Club" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Stylus 14

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Go to Item

Stylus 20

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 25 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H
*) Typical value

Go to Item

Stylus 305

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 305 Universal
*) Typical value

Go to Item

Stylus 310

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 г (12.5-17.5 мН)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 310 Universal
*) Typical value

Go to Item

Stylus 3E

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Go to Item

Stylus 510 MK II

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Go to Item

Stylus 5S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Go to Item

Stylus 7

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Go to Item

Stylus 78

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Go to Item

Stylus Brush Fibre

15,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon fibre brush for cleaning the stylus
For cleaning the stylus, use fiber brush a few times along the cantilever in the direction of the stylus, whenever you play a new record or change sides.

Go to Item

Stylus D 25 M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Go to Item

Stylus Guard for 2M Series (1 Stück)

2,54 €* 2,99 € -15%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Guard for VNL

7,42 €* 9,90 € -25%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Styli protection caps for VNL cartridges and styli

The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.

The protection caps come in pairs.

Go to Item

Super OM 5E

85,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Go to Item

VNL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL Premounted x SH-4 Headshell Black

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\\ Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\ Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \ Stylus

35,10 €* 39,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

"What Is A DJ If He Can't SCRATCH" Slipmat

Black Imperial Crown Snapback Cap

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

OutKast

19,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Outkast Imperial Crown Snapback Cap is an adjustable hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by the Outkast merch department.

Outkast Imperial Crown Snapback Cap - Features:

• high rise 6-panel construction
• Outkast Imperial Crown embroidery on front
• tonal eyelet stitching
• 7 eye snapback plastic closure at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% acrylic

Go to Item

OutKast

Stankonia T-Shirt

18,99 €* 19,99 € -5%

White Imperial Crown Snapback Cap

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Outkast Stankonia T-Shirt's features include:

• rib crew neck
• Stankonia artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

OutKast

19,99 €*

The Hidden Step Black Vinyl Edition

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Ozric Tentacles

LP | 2023 | EU | Original (Kscope)

30,99 €*

Release: 2023 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ozzy Osbourne

Skull & Wings Bandana

12,34 €* 12,99 € -5%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ozzy Osbourne Skull & Wings Bandana is equipped with printed S&W artwork as well as branding details. Measures: approx. 53 x 53 cm. 100% cotton.

Go to Item

Ozzy Osbourne

Ultimate Remix T-Shirt

17,99 €* 19,99 € -10%

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ozzy Osbourne Ultimate Remix Tee is equipped with the following features:
• rib crew neck with interior tape
• Ultimate Remix artwork printed on front and back
• regular fit
• 100% cotton single jersey

Go to Item

Pacific Rhythm

Outer Gardens T-Shirt

39,99 €*

Reset Black Vinyl Edition

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pacific Rhythm Outer Gardens T-Shirt - Features:
• rib crew neck with interior tape
• deep.gnome's Outer Gardens artwork screen-printed by Proper Design in Vancouver, BC on front
• regular fit
• 100% cotton shrink-free single jersey, 6.5 oz (garment dyed; made in USA)

Go to Item

Panda Bear & Sonic Boom

LP | 2022 | EU | Original (Domino)

25,99 €*

Release: 2022 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Papa Roach

Classic Logo T-Shirt

23,74 €* 24,99 € -5%

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Papa Roach Classic Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Papa Roach Classic Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Alta Down Jacket

674,95 €*

Available Sizes: L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Designed to keep you as warm during the cold season, the Alta Down Jacket by Parel Studios provides unrelenting insulation without compromising on weight. The Parel Studios Alta Down Jacket is equipped with fleece-lined hand warmer pockets, a zip pocket on left arm sleeve as well as a chest pocket to keep your stuff organized. Additional features include interior mesh pockets, an adjustable hood, a water-repellent 2-way front zipper plus hidden windguard cuffs, all of which assist in creating an impenetrable barrier against imposing weather.

Parel Studios Alta Down Jacket - features:

• high-necked, drawstring-adjustable hood with visor
• water-repellent 2-way front zipper with custom pulls
• Parel Studios branding at left front
• 2 fleece-lined handwarmer pockets with zip closure at lower front
• elastic bottom hem
• patch pocket with zip closure on left sleeve
• hidden stretch cuffs
• interior mesh pockets
• 600 Down Fill+ branding on right sleeve
• regular fit
• shell: 100% nylon with water-repellent DWR finish
• lining: 100% nylon
• pocket lining: 100% polyester fleece
• insulation: 90% down, 10% feathers (600 fill power)

Go to Item

Atlas Vest

195,45 €* 229,95 € -15%

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Parel Studios Atlas Vest - features:
• stand-up collar
• 2-way metal front zipper
• 2 pockets with zip closure at lower front
• additional side entry compartments at bottom's cargo pockets
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• stretch bordering at arm openings
• breathable mesh back panel
• zip pocket at the rear
• Parel Studios branding printed on left front and on the rear
• regular fit
• shell: 4-way stretch rip-stop made from 100% polyester
• lining: 100% polyester mesh

Go to Item

BP Crewneck

144,95 €*

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Inspired by vintage sweatshirts, the Back Print Crewneck Sweater by Parel Studios was designed to mirror some of their characteristics while bringing the garment up to a modern standard through renewed design practices. The Parel Studios BP Crewneck Sweater is crafted in Portugal from GOTS-certified organic cotton American fleece, and it was finished with unique garment-dyeing and custom screen-printed graphics on both front and the rear. The silicon-washed fabric enhances softness and durability while being pre-shrunk for lasting quality. This relaxed-fit crewneck sweatshirt by Parel Studios ensures ultimate comfort and style.

The Parel Studios BP Crewneck Sweater is equipped with the following features:

• rib crew neck with interior tape
• Parel Studios branding printed on left chest and upper rear
• stretch rib cuffs and bottom band
• relaxed fit
• 100% GOTS-certified organic cotton brushed American fleece, 300 g/m²
• made in Portugal

Go to Item

Cana Jacket

349,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Cana Jacket combines everyday functionality with advanced PrimaLoft® Cross Core™ insulation, initially developed for NASA, ensuring warmth in a timeless silhouette. The Parel Studios Cana Jacket is equipped with a chest pocket and two side pockets for essentials, while elastic cords at the waist and elastic bindings at the cuffs adjust for comfort. Reflective Parel Studios logos on the front and back enhance visibility, making it the perfect choice for both day and night.

Parel Studios Cana Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• 2-way front zipper with custom pulls and interior storm flap
• left chest pocket with zip closure
• 2 pockets with zip closure at lower front
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• stretch cuffs
• reflective Parel Studios logos printed at lower left front and upper back
• relaxed fit
• 88% nylon, 12% spandex

Go to Item

Legan Pants

174,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Legan Pants are equipped with the following features:
• elastic, drawstring-adjustable waistband with sturdy eyelets and aglets at the draw cord
• 2 side-entry front pockets wit tonal zip closure
• reflective Parel Studios logo printed on left leg
• relaxed fit, straight legs
• updated two-layer insulated stretch fabric for added warmth and comfort, made from 100% polyester

Go to Item

Legan Pants

96,22 €* 174,95 € -45%

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Legan Pants are equipped with the following features:
• elastic, drawstring-adjustable waistband with sturdy eyelets and aglets at the draw cord
• 2 side-entry front pockets wit tonal zip closure
• reflective Parel Studios logo printed on left leg
• relaxed fit
• lightweight stretch fabric made from 100% polyester

Go to Item

Lokka Bag M

124,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Lokka Bag M by Parel Studios is the ultimate everyday essential, boasting the mid size format of the Lokka range. This padded Parel Studios bag is equipped with two main compartments with zip closure, at zip compartment at the front as well as two mesh side pockets; it's perfectly accommodating laptops up to 14 inches within its dedicated reinforced laptop compartment. The Parel Studios Lokka Bag's features also include an adjustable shoulder strap for easy carrying. Dimensions: approx. 31 x 25 x 11 cm; 100% polyester.

Go to Item

Lokka Bag S

89,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Lokka Bag S by Parel Studios is the essential everyday accessory, offering versatility as both a cross-body and waist bag. As the smallest in the Lokka lineup, the Parel Studios Lokka Bag S is a padded construction equipped with two zip compartments for secure storage as well as a mesh pocket on the rear for easy access. With an adjustable and detachable strap, the Parel Studios Lokka Bag S adapts seamlessly to your daily needs, blending functionality with compact design. 100% polyester.

Go to Item

Nova Beanie

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

No fall/winter season without an essential beanie - a universally recognized cold-weather staple. Made from a custom blend of merino wool and acrylic, the Nova Beanie by Parel Studios offers superior warmth and softness. This Parel Studios Beanie is equipped with a prominent logo in a stylish Jacquard knit. Its improved fit ensures both comfort and style for any cold day. 70% acrylic, 30% wool knit yarn; made in Portugal.

Go to Item

Nova Beanie

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Sarez Overshirt

249,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sarez Overshirt by Parel Studios is a versatile and durable addition to any wardrobe. Made from sturdy rip-stop fabric, the Parel Studios Sarez Overshirt is equipped with a two-way front zipper including branded pulls as well as tonal logo embroidery at mid left front. With two flap pockets at chest, two side-entry zip pockets at lower front, and snap buttons at the cuffs, the Parel Studios Sarez Overshirt offers ample storage and a secure fit while the mesh lining ensures breathability and comfort. Relaxed fit; shell: 100% polyester rip-stop fabric; lining: 100% polyester mesh.

Go to Item

Senja Jacket

399,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Senja Jacket combines high-performance with practical design to keep you dry and comfortable in all conditions. The Parel Studios Senja Jacket is equipped with a waterproof membrane and taped seams, integrated into a 3-layer fabric. Adjustability is key, with a hood, hook and loop fasteners at cuffs, and drawstrings at the waist and hood for a perfect fit.

Parel Studios Senja Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• waterproof 2-wa front zipper with custom pulls and interior storm flap
• 2 front pockets with zip closure
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• adjustable straps with hook and loop fasteners at cuffs
• tape-sealed seams
• reflective Parel Studios logo printed on left chest
• relaxed fit
• shell: 100% nylon 3L softshell fabric
• lining: 100% polyester laminate

Go to Item

Sport Cap

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For ages, a headgear item like the Parel Studios Sport five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Parel Studios Sport Cap is equipped with the following features:

• Parel branding printed on front panel
• tonal eyelet stitching at vent holes
• slightly curved visor
• adjustable nylon strap with front-release buckle plus Parel woven flag label at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 4-way stretch rip-stop fabric made from 88% nylon, 12% spandex

Go to Item

Sport Cap

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Teide Jacket

249,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Teide Jacket is a lightweight, hooded jacket designed for active use, built from 4-way stretch ripstop fabric for maximum flexibility. This Parel Studios jacket is equipped with an adjustable hood and mesh-lined pockets for enhanced ventilation, alongside elastic cuffs and waist cords for a custom fit. It's perfect for outdoor activities, since it ensures comfort and protection.

Parel Studios Teide Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• 2-wa front zipper with custom pulls and interior storm flap
• 2 front pockets with zip closure
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• stretch cuffs
• reflective Parel Studios logo printed on left chest
• relaxed fit
• 88% nylon, 12% spandex 4-way stretch rip-stop fabric

Go to Item

Vinson Pants

99,97 €* 199,95 € -50%

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Parel Studios Vinson Pants are equipped with the following features:
• color-blocked cut and sew construction
• elastic, drawstring-adjustable waistband with sturdy eyelets and aglets at the draw cord
• 2 side-entry front pockets
• 2 zip pockets at the sides of the thighs
• 2 back pockets with zip closure
• mesh-lined side zippers at leg openings
• Parel Studios logo printed at upper left side
• relaxed fit, slightly tapered legs
• 4-way stretch rip-stop made from 88% nylon, 12% spandex

Go to Item

'73 Skyline Uprisal Hoody

99,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia '73 Skyline Uprisal Hoody is a classic hooded sweater design made from brushed, recycled fleece.

The Patagonia '73 Skyline Uprisal Hoody's features include:

• drawstring-adjustable two-layer hood with metal eyelets
• Patagonia '73 Skyline label at left chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• Patagonia's Fitz Roy Icon patch on right sleeve
• Patagonia woven flag label at left side seam
• relaxed fit
• 55% recycled polyester, 45% recycled cotton brush-back fleece, 390 g/m²
• Fair Trade Certified™ sewn

Go to Item

Airshed Cap

39,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Airshed Cap is an adjustable strapback hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by Patagonia.

Patagonia Airshed Cap - features:

• mid rise 6-panel construction
• Patagonia woven label on front
• tonal eyelet stitching
• pre-curved visor
• adjustable strap with hook and loop fastener at the rear
• interior includes plain taping and a moisture-absorbing, lightweight, low-profile sweatband made from 100% recycled Capilene® Cool Trail fabric for moisture and temperature management with built-in HeiQ® Fresh durable odor control
• cationic-dyed elastic 30-denier rip-stop made of 100% recycled polyester, 54 g/m², with PCF-free DWR impregnation without perfluorinated chemicals
• visor: NetPlus™ made of 100% recycled fishnets
• sweatband: double-knit material made from 100% recycled polyester, 78 g/m², with miDori® bioSoft impregnation for optimum moisture wicking and softness as well as HeiQ® Mint odor inhibitor
• Fair Trade Certified™ sewn
• weight: 68 g

Go to Item

Airshed Cap

39,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Airshed Visor

34,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Airshed Visor is an adjustable design that's on par with all the big players' stuff - a high-quality headwear piece single-handedly produced by Patagonia.

Patagonia Airshed Visor - features:

• Patagonia woven label on front
• pre-curved visor
• adjustable, elastic strap
• cationic-dyed elastic 30-denier rip-stop made of 100% recycled polyester, 54 g/m², with PCF-free DWR impregnation without perfluorinated chemicals
• visor: NetPlus™ made of 100% recycled fishnets
• sweatband: double-knit material made from 100% recycled polyester, 78 g/m², with miDori® bioSoft impregnation for optimum moisture wicking and softness as well as HeiQ® Mint odor inhibitor
• Fair Trade Certified™ sewn
• weight: 48 g

Go to Item

Airshed Visor

34,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Altvia Pack 28L

149,95 €*

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Altvia backpack accompanies you day trips or even longer trips, if an overnight stay is necessary. This 28-liter backpack by Patagonia has highly breathable material on the back padding and shoulder straps, a front-accessible storage pocket and a lid that can be closed in the style of a duffel bag with a cord. In addition, the Patagonia Altvia Pack 28L is made of durable as well as recycled nylon fabric.

Patagonia Altvia Pack 28L - features/specifications:

• lid with nylon webbing including side-release buckle
• comfortable shoulder and hip straps with extremely air-permeable Regulator® Airmesh
• air circulation promoting and condensation preventing back padding for lasting comfort
• variable hip belt with accessory pockets
• suitable for a hydration system
• lid and inner pocket have secure zip closure
• rain cover included
• weight: approx. 797 g
• dimensions: approx. 29 x 58.5 x 26.5 cm
• M = 41 - 48 cm (body) / 66 - 119 cm (waist)
• L = 46 - 53 cm (body) / 71 - 124 cm (waist)
• capacity: 28 liters
• exterior fabric: 140D rip-stop fabric made of 100% recycled nylon, 136 g/m²
• bottom: 210D rip-stop fabric made of 100% recycled nylon, 139 g/m²
• rain cover: 100% recycled polyester taffeta, 75 g/m²
• pack sack, floor and rain cover are equipped with PU coating and a PFC-free DWR impregnation
• back padding and shoulder straps: 100% polyester mesh, 149 g/m²
• pockets: Mesh made of 66% nylon, 34% elastane, 319 g/m²
• lining: 200D fabric made of 100% recycled polyester, 102 g/m², with PU coating
• frame: Layered foam frame sheet

Go to Item

Baggies Jacket

159,95 €*

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Baggies design, Patagonia seamlessly blends the silhouette of a classic harrington jacket with functional features such as a DWR-finished nylon shell that offers protection against rain and winds. Plus, the NetPlus® nylon faille of the Patagonia Baggies Jacket is bluesign™-certified and made 65% from post-consumer nylon while the mesh lining consists of recycled poly fibers.

The Patagonia Baggies Jacket is equipped with the following features:

• turn-down collar
• tonal metal front zipper with custom pull
• raglan sleeves
• 2 pockets with tonal zip closure at lower front
• stretch hemlines cuffs and body
• contrast mesh lining
• Patagonia label at left chest
• weight: approx. 456 g in size M
• shell: bluesign™-certified 95% nylon (65% recycled), 5% spandex plain weave faille with PFC-free DWR (Durable Water Repellant) finish, 190 g/m²
• lining: bluesign™-certified 100% recycled polyester mesh, 129 g/m²
• Fair Trade Certified™

Go to Item

Baggies Jacket

159,95 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Baggies design, Patagonia seamlessly blends the silhouette of a classic harrington jacket with functional features such as a DWR-finished nylon shell that offers protection against rain and winds. Plus, the NetPlus® nylon faille of the Patagonia Baggies Jacket is bluesign™-certified and made from post-consumer nylon while the mesh lining consists of recyceld poly fibers.

The Patagonia Baggies Jacket is equipped with the following features:

• turn-down collar
• tonal metal front zipper with custom pull
• raglan sleeves
• 2 pockets with tonal zip closure at lower front
• stretch hemlines cuffs and body
• contrast mesh lining
• Patagonia label at left chest
• weight: approx. 456 g in size M
• shell: bluesign™-certified 100% recycled nylon NetPlus® faille with PFC-free DWR (Durable Water Repellant) finish and 50+ UPF UV protection, 142 g/m²
• lining: 100% recycled polyester mesh, 129 g/m²
• Fair Trade Certified™

Go to Item

Baggies Lights

64,95 €*

Available Sizes: S, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Lights are the slimmer brother of the regular Baggies, made from lightweight NetPlus® fabric, equipped with mesh lining.

The Patagonia Baggies Lights are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• Patagonia woven label at lower left leg
• regular fit
• 16.5 cm inseam
• weight: approx. 173 g
• shell: bluesign® approved weave made from 95% nylon (65% recycled), 5% elastane, 142 g/m², with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals)
• lining: 100% polyester mesh

Go to Item

Baggies Lights

64,95 €*

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Baggies Lights are the slimmer brother of the regular Baggies, made from lightweight NetPlus® fabric, equipped with mesh lining.

The Patagonia Baggies Lights are equipped with the following features:

• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets with mesh lining
• Patagonia woven label at lower left leg
• regular fit
• 17 cm inseam
• weight: approx. 173 g
• shell: NetPlus® 96% post-consumer recycled nylon faille (made from recycled fishing nets to help reduce ocean plastic pollution), 4% elastane, 149 g/m², with a PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals)
• lining: 100% polyester mesh

Go to Item

Baggies Lights

44,95 €* 49,95 € -10%