All Items 9214 Items

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan White Mask Tee is equipped with the following features:

• rib crew neck with interior tape
• White Mask artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Wu-Tang Clan

Black Logo T-Shirt

24,99 €*

Available Sizes: S, M, L, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan Black Logo T-Shirt's features include:

• rib crew neck with interior tape
• Wu-Tang Clan Black Logo artwork printed on front
• Wu Wear woven flag label at left side seam
• relaxed fit
• 100% cotton single jersey

Go to Item

JDDSSB - Digital Start Stop Button Kit

Bib Overall "Norco" Denim, 11.25 oz

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Digital start stop button for your portable turntable!

A highly efficient start stop button kit by Jesse Dean, that only draws less than 1mA...

• No need for latching relays
• No soldering
• No noise
• Powered from the turntable motor
• PT01 series and Handytrax ready

The kit includes:

• Digital JDD start/stop controller board
• 16mm aluminum momentary button
• 400mm button wire
• x2 wire crimps

Installation video:
https://youtu.be/wIAFvCDCh-o

Go to Item

Carhartt WIP

143,95 €* 159,95 € -10%

Simple Pant "Norco" Denim, 11.25 oz

Available Sizes: 30/30, 30/32, 32/30, 34/30, 34/32, 36/30

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Bib Overall, Carhartt WIP introduces a design that was inspired by hillbilly dress codes and workwear classics, but you'll also cut a good figure if you never plan to leave the asphalt jungle. Made from Norco denim, the Carhartt WIP Bib Overall is equipped with features like a three-compartment denim patch pocket on the bib, Carhartt-branded metal buttons at the adjustable suspenders and side slit openings, diamond-shaped back yokes, a hammer loop at left leg, an additional coin pocket at left front pocket, bar tack stitching at front and back pockets plus side seams, contrast stitching as well as a Carhartt woven label on the bib pocket. Relaxed fit with slightly tapered legs and regular waistline; 100% cotton Norco denim, 11.25 oz.

Go to Item

Carhartt WIP

99,95 €*

Available Sizes: 29/32, 30/32, 31/32, 31/34, 32/32, 32/34, 33/32, 33/34, 34/32, 34/34, 36/32, 36/34, 38/32, 38/34, 40/32, 40/34

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from custom Norco denim, the Carhartt WIP Simple Pants represent a traditional 5-pocket construction equipped with a branded front center metal button, a zip fly, triple-stitched seams, bartack stitching at vital stress points as well as a Carhartt woven square label on right back pocket - a classic minimalist design that never looks dated!

The Carhartt WIP Simple Pants Norco are equipped with the following features:

• 5-pocket canvas construction
• branded front center button
• zip fly
• 2 front pockets plus coin pocket at wearer's right
• V-shaped back yoke
• 2 self-fabric patch pockets with tonal signature stitching at the rear
• bar-tack stitching at vital stress points
• tonal stitching
• Carhartt woven square label on right back pocket
• regular fit, regular waist, tapered legs
• 100% cotton "Norco" denim, 11.25 oz

Go to Item

Concorde MkII MIX Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII DJ Stylus

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DJ

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII MIX Single

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

Go to Item

Concorde MkII CLUB Twin

329,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

• incl. Brush
• incl. Flight Case

Video: https://youtu.be/WZnFkEwAnCo

supplied in Flight case

Go to Item

Concorde MkII DJ Single

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

Go to Item

Concorde MkII SCRATCH Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII MIX Twin

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII Fingerlift

9,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Go to Item

Concorde MkII DJ Twin

249,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII SCRATCH Single

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

Go to Item

Concorde MkII SCRATCH Twin

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII CLUB Single

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII CLUB Stylus

69,00 €*

Pocket Operator PO-35 SPEAK Vocal Synthesizer und Sampler

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Teenage Engineering

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Trefoil Liner Socks (Pack of 3)

adidas

12,30 €* 12,95 € -5%

Trefoil Liner Socks (Pack of 3)

Available Sizes: 35-38, 39-42, 43-46

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The adidas Trefoil Liner Socks (Pack of 3) contains three pair of sneaker socks with jacquarded Trefoil emblems at the instep of each sock. 72% cotton, 25% polyester, 2 % elastane, 1% nylon.

Go to Item

adidas

10,36 €* 12,95 € -20%

Available Sizes: 35-38, 39-42, 43-46

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The adidas Trefoil Liner Socks (Pack of 3) contains three pair of sneaker socks with jacquarded Trefoil emblems at the instep of each sock. 72% cotton, 25% polyester, 2 % elastane, 1% nylon.

Go to Item

One Finger T-Shirt

Available Sizes: S, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies One Finger T-Shirt's features include:
• rib crew neck with interior tape
• ST branding prinzed at left chest
• One Finger artwork printed on the rear
• regular fit
• 100% cotton single jersey
• comes with 3x7" Logo Sticker

Go to Item

One Finger Hoodie

54,99 €*

Available Sizes: M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies One Finger Hoodie's features include:
• drawstring-adjustable hood with metal eyelets
• SxTx logo printed on chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• One Finger artwork printed on the rear
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

OG Flip Hat

31,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Fold up the visor and sport an ST bandana to become a member of the infamous Suicidal Tendencies gang!

Suicidal Tendencies OG Flip Hat - features:

• high rise construction
• slightly foamed Suicidal Tendencies lettering printed on foamed front panel
• side and rear mesh panels
• tonal visor with signature Suicidal lettering on bottom
• 7 eye snapback plastic closure
• interior includes plain taping and a moisture-absorbing sweatband
• 100% polyester

Go to Item

Enjoy Suicidal T-Shirt

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies Enjoy Suicidal T-Shirt's features include:

• rib crew neck
• Enjoy Suicidal artwork printed on front
• Suicidal Tendencies logo printed at rear's bottom
• regular fit
• 100% cotton single jersey

Go to Item

Charlie T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies Charlie T-Shirt's features include:

• rib crew neck with interior tape
• Charles Manson artwork printed on front
• ST branding plus additional writing printed on the rear
• relaxed fit
• 100% cotton single jersey

Go to Item

Stones Throw

Logo Tote Bag

18,89 €* 20,99 € -10%

Disco-Antistat Gehäuse mit 2 Bürstchen - Generation 2

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Stones Throw Melted Logo Tote Bag is equipped with signature graphic art printed on front as well as two handles. Measures: approx. 35.5 x 40.5 cm. 100% cotton canvas.

Go to Item

Knosti

26,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement case for our Disco Antistat record cleaning machine Generation II, with two brushes, without drying stand.

Made in Germany!

Go to Item

Stones Throw

Outline Pullover Hoodie

64,99 €*

Disco-Antistat Schallplatten-Waschgerät - Generation 2 PLUS (Set)

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Stones Throw Outline Pullover Hoodie´s features include:

• drawstring-adjustable hood with metal eyelets
• Stones Throw outline logo printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Knosti

79,00 €*

Disco-Antistat Schallplatten-Waschgerät (Set)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

Go to Item

Knosti

59,99 €*

Vinyl Nassreinigungsarm-Set

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Practical care set for basic cleaning. Lasting antistatic effect with Disco-antistat mixture, a special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Made in Germany!

Go to Item

analogis

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

Go to Item

The Doors

Rots Sunset T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Doors Rots Sunset T-Shirt's features include:

• rib crew neck
• Rots Sunset artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Lousy Livin Underwear

Ananas

16,95 €*

Pöbel MC & Milli Dance von Waving The Guns

Available Sizes: S, M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Classic boxers out of the Lousy Livin Underwear line with a woven label on the stretch waistband, button front closure, plus custom Ananas graphics printed all over. Relaxed fit. 100% cotton.

Öko-Tex Standard 100-tested.

Go to Item

Soli-Inkasso T-Shirt

21,99 €*

Available Sizes: 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Pöbel MC & Milli Dance von Waving The Guns Soli-Inkasso T-Shirt's features include:

• rib crew neck
• Pöbel MC & Milli Dance artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Birkenstock

W Arizona EVA

49,95 €*

Available Sizes: EU 36, 37, 38, 40, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The slim version of Birkenstock's Arizona is a classic wellness-style sandal equipped made from EVA, equipped with an anatomically shaped footbed, a non-slip outsole tread as well as two bold, adjustable straps with Birkenstock branding embossed at buckles. If you're looking for the most comfortable footwear item, make sure Birkenstock's Arizona will be shortlisted. 100% ethylene vinyl acetate.

• fit: SLIM

Go to Item

Yellow Flower

Flower 12" Slipmat

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN10CB Stylus

56,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN10CB
REPLACEMENT STYLUS FOR VM510CB & VM610MONO
Conical Bonded stylus
Bonded Round Shank construction
Blue

Go to Item

VM510CB

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM510CB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH CONICAL STYLUS
Conical Bonded stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Conical Bonded stylus for less critical tilt angle adjustment allowing more flexible use on various tonearms.
VM type dual magnet design ensures outstanding channel separation, extended frequency response and superb tracking
Lightweight tapered aluminium cantilever allows for faithful reading of the record groove
Centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB
Durable low resonance polymer housing

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 20,000Hz
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 5.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Conical Bonded
Stylus Size 0.6 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN10CB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM510CB_UM_V2_11L_web_161011.pdf

Go to Item

VMN20EB Stylus

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN20EB
REPLACEMENT STYLUS FOR VM520EB
Elliptical Bonded stylus
Bonded Round Shank construction
Blue

Go to Item

AT-LT13A Headshell

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

Mild High Club

Mild High Candy T-Shirt

22,39 €* 31,99 € -30%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Mild High Club Mild High Candy T-Shirt's features include:
• rib crew neck
• Mild High Candy artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

PT01 Felt Replacements

5,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

PT01 Felt Replacements

5,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

PT01 Felt Replacements

5,99 €*

TTW10 Turntable Weight For 12" And 7"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

Varia Instruments

119,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Go to Item

Fred Perry

Plain Fred Perry Shirt

89,95 €*

The Fred Perry Polo Shirt

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Plain Fred Perry Polo Shirt, also known as M6000, was inspired by the original polo that the brand's founder used to sport on the court in the 1950s. The Fred Perry Plain FP Polo Shirt features a rib collar and rib cuffs, button placket at chest as well as Fred Perry's Laurel Wreath embroidery at left chest, while the twin tipped accents are missing. It's equipped with a slim fit, plus it's made from 100% cotton piqué.

Go to Item

Fred Perry

89,95 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

VM520EB

109,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM520EB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Bonded profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 23,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN20EB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM520EB_UM_V2_11L_web_161021.pdf

Go to Item

Yellow Flower

Summer 12" Slipmat

10,49 €* 14,99 € -30%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Mani Deiz

MPC Vador T-Shirt

9,19 €* 22,99 € -60%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Mani Deiz MPC Vador T-Shirt's features include:
• rib crew neck with interior tape
• MPC Vador artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Blondie

Punk Logo T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Blondie Punk Logo T-Shirt's features include:

• rib crew neck
• Blondie Punk Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

G-Shock

GA-110-1BER

84,46 €* 129,95 € -35%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new Casio G-Shock GA-110-1BER watch brings up an individualistic design and a solid color scheme especially created for party people and players who are ready to party and play. This great watch adds a new twist to streetwear while all OG G-Shock features are still in effect.

The G-Shock GA-110-1BER's features include:

• case/bezel material: Resin
• resin band
• shock resistant
• hardened mineral glass
• magnetic resistant
• 200 meter water resistance (20 bar)
• LED light
• auto light switch, selectable illumination duration, afterglow
• world time: 29 time zones (48 cities + coordinated universal time), city code display, daylight saving on/off, Home city / World time city swapping
• 1/1000-second stopwatch: Measuring capacity: 99:59'59.999''/measuring modes: Elapsed time, lap time, split time/others: Speed (0 to 1998 units/hour), Distance input (0.0 to 99.9)
• Countdown timer: Measuring unit 1 second; countdown range: 24 hours; countdown start time setting range: 1 minute to 24 hours (1-minute increments and 1-hour increments); other: Auto-repeat
• 5 daily alarms (with 1 snooze alarm)
• hourly time signal
• full auto-calendar (to year 2099)
• 12/24-hour format
• regular timekeeping
• analog: 2 hands (hour, minute (hand moves every 20 seconds)), 1 dial (speed)
• digital: Hour, minute, second, pm, month, date, day
• accuracy: ±15 seconds per month
• approx. battery life: 2 years on CR1220
• dimensions: approx. 55 x 51.2 x 16.9 mm (H x B x T)
• weight: approx. 72 g

Go to Item

Underground Resistance

UR003 T-Shirt

24,99 €*

Available Sizes: XS, S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

The Underground Resistance UR003 T-Shirt's features include:
• rib crew neck
• UR003 artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Descendents

Classic Milo T-Shirt

22,99 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Descendents Classic MiloT-Shirt's features include:
• rib crew neck
• Classic Milo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

HHV

Bottle Opener

80 Bonus Coins

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Bonus Coins

Let's get the party started with the HHV Bottle Opener.

Go to Item

HHV

HHV Logo Slipmat

120 Bonus Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Bonus Coins

Made from 21 oz FattEz™, the HHV Logo Slipmats are perfect for precise DJing activities. This 12" slipmat is made from the highest quality poly felt material that's very similar to the thick felt of old school Technic slipmats. The HHV Logo Slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface. Perfect for the mix/club DJ as well as turntable and audiofile enthusiasts.

• Weight: 21 oz;
• thickness: 0.125 inch.
• 100% polyester felt.
• Made in USA

Go to Item

12" Schallplatten Aufbewahrung (100)

26,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

Go to Item

12" Schallplatten Aufbewahrung (100)

26,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

7" Schallplatten Aufbewahrung (100)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.
Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Go to Item

7" Schallplatten Aufbewahrung (100)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Go to Item

Baja Frequencia

Cat Friendly T-Shirt

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Baja Frequencia Cat Friendly T-Shirt's features include:
• rib crew neck
• Cat Friendly artwork printed on front (artwork by Jeremy GUENNEGUEZ)
• Baja Frequencia branding printed at top rear
• regular fit
• 100% cotton ring-spun single jersey, 190 g/m²

Go to Item

AT-MG10 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

Dirty T-Shirt

Available Sizes: L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sonic Youth Dirty T-Shirt's features include:
• rib crew neck
• Dirty artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Daydream Nation T-Shirt

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sonic Youth Daydream Nation T-Shirt's features include:
• rib crew neck
• Daydream Nation artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Goo T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sonic Youth Goo T-Shirt's features include:
• rib crew neck
• Goo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Goo Zip-Up Hoodie

44,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sonic Youth Goo Zip-Up Hoodie's features include:
• drawstring-adjustable two-layer hood
• water-repellant, heat-sealed metal front zipper
• Sonic Youth lettering printed on chest
• split kangaroo pocket
• stretch rib cuffs and bottom band
• Goo artwork printed on the rear
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Patagonia

Nano Puff Jacket

197,95 €* 219,95 € -10%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Patagonia Nano Puff Jacket is a quilted design with a DWR-finished rip-stop shell as well as PrimaLoft® Gold insulation that's almost completely functional when it's wet. Not that bad, huh?

The Patagonia Nano Puff Jacket's features include:

• brick-patterned quilting
• high-necked collar
• front zipper with custom pull and interior storm flap
• 2 front pockets with zip closure
• stretch cuffs
• interior chest pocket with zip closure at wearer's left
• Patagonia woven label at left chest
• regular fit
• shell: 100% recycled polyester 20D with DWR finish, 47 g/m²
• lining: 100% recycled polyester 22D with DWR finish, 44 g/m²
• fill: 100% polyester PrimaLoft® Gold, 60 g/m²
• weight: approx. 337g

Go to Item

JDDX2RS-A Numark PT01 Scratch Fader

71,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Go to Item

JDDX2RS-A Numark PT01 Scratch Fader

71,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

JDDX2RS-A Numark PT01 Scratch Fader

71,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Teac

TN-280BT

331,55 €* 349,00 € -5%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2-speed Analog Turntable with Phono EQ and Bluetooth
A wireless turntable for new way of enjoying vinyl records

The TN-280BT is not only a great-sounding turntable for music enthusiastic who wants to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records

The TN-280BT also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.

The belt-drive motor on the TN-280BT reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.

For music enthusiasts who want to hear every sensuous note of their vinyl collection.

Main Features

2-speed Belt-drive turntable
Built-in Bluetooth transmitter
Built-in MM phono equalizer and Phono, Line, and Bluetooth outputs
High-performance MM cartridge included (Made in Japan)
Aluminum die-cast platter
Anti-skating mechanism
High-density MDF cabinet for better vibration and resonance

Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.2%
Signal-to-Noise Ratio more than 67 dB (A-weighted)
60 dB (unweighted, 20kHz, LPF)
Turntable (Platter)
Material Aluminum Die-cast
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Length 223 mm
Stylus Pressure Range 0 to 5 g
Compatible Cartridge 3.5 to 6.5 g
Anti-skating Adjustment Supported
Head-shell and Cartridge sections
Type MM-type
Stylus Shape Elliptical
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Output Impedance 47k ohms
Output Voltage 4.5 mV (+/-3dB)
Stylus Pressure 2.0 g (+/-0.5 g)
Cartridge Weight 5.7 g (+/- 0.5 g)
Head-shell Weight 10 g (including nuts, screws, and wires)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 4.5 mV (+/-3dB)
LINE 120 mV (-13dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

General
Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.5 Watts or less
Dimensions (W x H x D) 420 × 117× 356 mm / 16.5” x 4.6” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Felt Mat x 1
EP Adapter x 1
Counter Weight x 1
Head-shell x 1 (MM-type cartridge installed)
Turntable (Platter) x 1
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

Go to Item

Quasimoto

QE T-Shirt

17,59 €* 31,99 € -45%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Quasimoto vs P.E. Designer Jeff Jank’s take on the Public Enemy logo featuring Lord Quas in the crosshairs.

The Quasimoto QE Tee is equipped with the following features:

• rib crew neck with interior tape
• QE artwork printed on front
• relaxed fit
• 100% cotton single jersey, 6 oz

Go to Item

Madlib

Headlib T-Shirt

25,59 €* 31,99 € -20%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Take a look at the creative mind of producer extraordinaire Madlib! Preshrunk crew neck tee featuring tricolor graphic front print, made of psychedelic writings of Madlib alter egos and projects Mr. Jackson is involved.

The Madlib Headlib Tee is equipped with the following features:

• rib crew neck with interior tape
• Headlib artwork printed on front
• relaxed fit
• 100% cotton single jersey, 6 oz

Go to Item

Quasimoto

QE T-Shirt

15,99 €* 31,99 € -50%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Freddie Gibbs & Madlib

Pinata T-Shirt

31,99 €*

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Freddie Gibbs and Madlib took these on a short tour they did for the Piñata record. Design by Mason London.

The Freddie Gibbs & Madlib Pinata T-Shirt's features include:

• rib crew neck with interior tape
• Mason London's Pinata artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Teac

W-1200

419,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The W-1200 is a double cassette deck featuring two, one-way cassette decks, mic mixing, a USB digital output and other versatile recording features. In recent times, cassette tapes have fascinated those whom have never used them, thanks to their warm, distinctly analogue sound, not to mention the ease of recording and the ability to create ‘mix-tapes’.

TEAC set out to create a cassette deck that combined an excellent level of performance with an interface that suits the digital audio era. Not only does the W-1200 offer sound that’s close to the original, it also has a wide range of versatile facilities that allow karaoke singing, the recording of conference minutes, and even the digital recording of analogue cassettes via a computer.

The two cassette decks support recording and playback on each as they have independent drive mechanisms, meaning owners can record on both decks simultaneously to make a pair of identical tapes at the same time. And mic input and mic mixing allow you to practice your Karaoke singing over a cassette tape or an external sound source (via LINE IN).

TEAC's decades of experience in making recording equipment are self-evident in the W-1200, particularly where the noise reduction system is concerned. It allows users to play back legacy cassette tapes originally recorded with Dolby B NR and hear them correctly. Moreover, the pitch control allows you to change playback speed to whatever’s considered appropriate while the level meters provided enable fine-tuning of recording levels. A timer REC/PLAY function is provided to allow use with a third-party audio timer.

Furthermore, the W-1200 can deliver digital audio at CD-quality (up to 48kHz/16-bit PCM) to a computer via a USB cable, allowing digital archiving of your cassette tape library. Once you’ve digitised them on a computer, you’re able to enjoy your old tape-based music library anytime anywhere via a network player, DAP, smartphone or even in your car.

Delivering a high standard of fidelity as a recording device, combined with advanced digital technologies, the W-1200 sets a new standard for double cassette decks in the modern age.

Dual cassette decks for REC/PLAY with independent mechanisms
Two simple and reliable one-way cassette mechanisms are employed. During playback (or recording) of TAPE1, users are able to change the cassette tape in TAPE2, preparing it to play (or record) next. Since both of the decks have independent drive sections for control, when one deck is playing (or recording) users are able to operate the other deck (changing tapes, fast forwarding or rewinding,) without affecting the operation of the first deck, ensuring continuity of playback or recording. Both decks support the playback of Normal (Type I), Chrome (Type II), and Metal (Type IV) tapes, while supporting recording on Normal and Chrome-type tapes.

Noise reduction system for playback of Dolby B tapes
The built-in noise reduction system suppresses the hiss noise that inherent in cassette tape playback. This allows cassette tapes that were recorded using Dolby B NR in the past to be played back with sound quality that is close to the original.

Pitch control and RTZ functions
TAPE1 is equipped with a pitch control that changes playback speed (in order to restore the playback sound on old tapes to the original key) by allowing the adjustment of tape speed by ±12%. Moreover, by combining the Pitch control and A-B Repeat play, users are able to make voices easier to understand at reduced tape speeds when transcribing recorded meetings and speeches. Furthermore, both TAPE1 and TAPE2 are equipped with Return-to-Zero (RTZ) functions that make returning to them to their "0000" counter positions easy with the press of a single button.

Parallel Recording for making identical tapes simultaneously
Parallel Recording makes a pair of identical tapes at the same time on TAPE1 and TAPE2. It is a convenient way to provide someone a copy of a tape right after making a recording.

Dual mode REC MUTE
The dual mode REC MUTE function allows users to erase unnecessary sections and to add spaces (silences) between tracks while recording. During recording or rec-standby, the W-1200 creates a 4- second ‘blank’ (which is a standard gap) between tracks simply by pressing the REC MUTE button once – press and hold it for more than 4 seconds and you can create a blank as long as you need.

Mic input and mic mixing for Karaoke and announcement applications
The mic input and mixing function allow users to mix mic sound and tape/aux sound, and to record mixed sound to a cassette tape. By adjusting the mic level, users are able to enjoy Karaoke performance, (useful for announcement-type applications) without an external mixer. Of course, recording the mic sound alone to a cassette tape is also supported. Combine that with the Parallel Recording facility and users can create a pair of identical tapes simultaneously, useful for making conference minutes, for example, one being the ‘master’ and another for distribution.

One-touch tape dubbing
With just the press of a button, users are able to duplicate cassette tapes, making a backup copy of the original tape. Users are also able to create silences between tracks by pressing the REC MUTE button during dubbing. This also serves as a simple editing system, by allowing the erasing of unwanted sections.

Fluorescent display with level meters
A fluorescent display with high contrast and high brightness is employed to show - in one place - all the information needed to operate the decks, including Left and Right level meters for full-fledged recording plus independent tape counters tor TAPE1 and TAPE2. The dimmer function allows users to adjust the brightness according to the environment.

USB digital out for digital recording on PC/Mac
The built-in A/D converter and a USB digital output on the rear panel allows users to digitally archive their cassette tape libraries, at 48kHz/16-bit CD-quality. The sampling frequency and bit depth are selectable from 8k to 48kHz and 8 or 16 bit, depending on recording quality of the original tape. Once a digital archive is created, users are able to listen to them anytime anywhere with a computer, DAP, smartphone, network player or even in a car.

Features at a glance
• Dual cassette decks for REC/PLAY on both decks with independent mechanism
• Noise reduction system suppresses hiss during playback (equivalent to Dolby B NR)
• Normal (Type I) and Chrome (Type II) tapes REC/PLAY (auto detect)
• Metal (Type IV) tape Play (auto detect)
• REC MUTE creates four second silences with one touch, or silences of other lengths as desired
• Mic input with mic mixing for karaoke and announcement applications
• One-touch dubbing for easy tape duplication
• Parallel (simultaneous) recording for recording to two tapes at the same time
• Timer REC/Play ready
• Four-digit digital tape counters
• RTZ (Return to Zero) function for one-touch return to the tape counter "0000" position
• Repeat play (playback stops after a maximum of 20 repetitions)
• ±12% pitch control
• Dimmable fluorescent display with level meters
• USB output for digital recording on PC/Mac *3
• RCA analogue input jacks
• 6.3mm (1/4") stereo headphone output jack
• Remote control included
• RoHS compliant

Included accessories
• Remote control
• AA batteris x2
• RCA audio cable x1
• Owner's Manual

Manual: https://www.teac-audio.eu/downloads/3/4/1/3/0/Manual_W-1200__EFS_.pdf

Go to Item

Kangol

504 Kangol Cap

69,95 €*

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Since 1954, the Kangol Wool 504 Original is the one and only cap. Remember, in 1983, Kangol's signature kangaroo graphic was introduced, and the brand's hats immediately became a most popular fashion item, thanks to iconic trendsetters like Slick Rick, LL Cool J, Madonna, Michael Jordan, and Grandmaster Flash – Flash even sports the legendary 504 hat in the Hip Hop Hall of Fame. What's so great about the Kangol Wool 504 Original Cap, is the timeless, unique shape coupled with premium fabrics. Features include a barely visible visor as well as Kangol's kangaroo logo embroidery at the rear, while interior is equipped with an elastic, moisture-absorbing sweatband. 100% wool.

Go to Item

Kangol

Wool Jax Beret

80,95 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Wool Jax Beret, Kangol presents an update of the legendary Basque hat made from soft wool blend fabric, equipped with kangaroo logo embroidery as well as an interior headband which adds comfort. Main fabric: 75% wool, 25% modacrylic; headband: 100% nylon.

Go to Item

Kangol

Cord Bucket Hat

64,95 €*

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Kangol Cord Bucket Hat is a six-panel fisher hat made from elastic corduroy fabric, equipped with a signature kangaroo logo by Kangol embroidered at the crown plus tonal stitching, while interior is equipped with a moisture-absorbing sweatband. 98% cotton, 2% elastane corduroy.

Go to Item

Chateau Vinyl Solo Nylon (75)

298,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl solo | nylon black stealth edition

chateau vinyl offers a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl.
advice to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: black

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Chateau Vinyl 7 Inch Cotton (60)

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offeres a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned , removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: waterproof durable cotton canvas
colour: deep blue

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Gunnar Backpack (35)

215,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo
_made from durable, lightweight & waterproof fabric

material: cordura® nylon & genuine leather details
colour: black

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Taunus 1.2 Com Fi Backpack (25)

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

taunus 1.2 | com fi | deep blue

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: water-repellent cotton canvas w/ leather buttons
colour: deep blue
size: 48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

12" Vinyl BackBag Ersatz Schultergurt

15,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

STill Cyco Punk T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies STill Cyco Punk Tee is equipped with the following features:
• rib crew neck with interior tape
• STill Cyco Punk artwork printed on front
• Suicidal Tendencies logo printed on the rear
• relaxed fit
• 100% cotton single jersey

Go to Item

Leuchtfeuer Strickwaren

Kiel Scarf

49,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Leuchtfeuer Strickwaren Kiel Scarf is a cozy fine-knit item made from a soft virgin wool yarn that's equipped with a woven Leuchtfeuer Strickwaren label. Measures: ca. 28 x 180 cm; 100% virgin wool.

Go to Item

Juse Ju

Shibuya T-Shirt

21,99 €*

Street Court Socks (Pack of 2)

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Juse Ju Shibuya T-Shirt's features include:
• rib crew neck
• Shibuya artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Lousy Livin Underwear

23,95 €*

10" Control Vinyl Performance-Serie

Available Sizes: 38-41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Two pair of Lousy Livin Underwear socks with signature graphic stitched at the ribbed part plus jacquarded branding at the sole. 82% cotton, 16% polyamide, 2% elastane.

Go to Item

Serato

31,99 €*

LP Slipmat (16oz - glazed bottom)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

Go to Item

Slipmat

7,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Professional Grade 12″ Custom Slipmats

Material Specs
Color: White
Material: 100% polyester felt
Weight: 16oz
Dimensions: 11.75″ Diameter
Thickness: .0625 (1/16″)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Soft
Accuracy: Precise

Go to Item

Leuchtfeuer Strickwaren

Leuchtfeuer Beanie

27,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Leuchtfeuer Beanie is a vintage docker's knit hat that features a soft hand feel and a rough rib texture. Also equipped with a roll-up cuff, the Leuchtfeuer Walfänger Beanie is a plain design with a timeless look, while the knitting yarn is made from 100% virgin wool. By the way, Leuchtfeuer Stickwaren is producing all of their knitwear items from the finest pure wool, using traditional knitting techniques and patterns, plus all products are manufactured in Lilienthal, Germany.

Go to Item

Leuchtfeuer Strickwaren

Neptun Beanie

34,95 €*

Vicious Pant "Lamar" Stretch Twill, 8.6 oz

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The plain Leuchtfeuer Strickwaren Neptun Beanie is a vintage rib-knit hat with bold cuff, made from high-quality knitting yarn for a soft surface feel. 100% Merino wool. By the way, Leuchtfeuer Stickwaren is producing all of their knitwear items from the finest pure wool, using traditional knitting techniques and patterns, plus all products are manufactured in Lilienthal, Germany.

Go to Item

Carhartt WIP

51,96 €* 79,95 € -35%

Available Sizes: 33/32

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Carhartt WIP Vicious Pants Lamar represent a classic 5-pocket twill construction equipped with a branded front center button, a zip fly, metal rivets or bartack stitching at vital stress points, a back yoke, tonal stitching, and a Carhartt WIP leather script label at right back pocket. Regular fit, low crotch, tapered leg. "Lamar" stretch twill made of 46% cotton, 38% T400®, 16% polyester, 8.6 oz.

Go to Item

Anderson's

B0667 Woven Belt

83,96 €* 104,95 € -20%

Available Sizes: 90, 100, 105

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made in Italy, the Anderson's B0667 NE37 Belt is a casual design that blends braided textile parts with full grain calfskin leather trim. The Anderson's B0667 NE37 Belt is also equipped with a smart colorway that goes well with denim or chino pants/shorts as well as a polished buckle made from stainless steel. Width: approx. 3.5 cm. Materials: Leather and textile. Made in Italy.

Go to Item

Veja

Esplar WMN

116,95 €* 129,95 € -10%