All Items 7502 Items

Dots Short

87,96 €* 109,95 € -20%

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Edwin Dots Shorts - features:
• custom 3D dot graphics printed all over
• elastic, drawstring-adjustable waistband
• 2 side-entry front pockets
• self-fabric patch pocket at wearer’s right rear
• relaxed fit
• 100% cotton seersucker, 102 g/m²
• made in Portugal

Go to Item

Dots Shirt SS

107,96 €* 134,95 € -20%

Available Sizes: M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Edwin Dots Shirt SS - features:
• custom 3D dot graphics printed all over
• turn-down collar
• button front closure
• straight bottom hem
• relaxed fit
• 100% cotton seersucker, 102 g/m²
• made in Portugal

Go to Item

Darren Coach Jacket

169,95 €*

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Darren Coach Jacket is equipped with the following features:
• quilted stitching inspired by seasonal Edwin graphics
• widespread turn-down collar
• snap button closure at front opening
• 2 welt pockets at lower front
• drawstring-adjustable bottom hem
• adjustable stretch cuffs with hook and loop fasteners
• interior chest pocket at wearer's left
• Japanese Edwin woven flag label at left side seam
• relaxed fit
• shell & lining: 100% polyester, 70 g/m²

Go to Item

Cosmos Pant PFD Twill, 290gr/m²

89,96 €* 119,95 € -25%

Available Sizes: 33/28, 34/28

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Cosmos Pants are equipped with the following features:
• 5-pocket denim construction
• branded front center button
• zip fly
• 2 front pockets plus coin pocket at wearer's right
• Edwin patch at the rear of the waistband
• back yoke
• 2 self-fabric patch pockets at the rear
• bar-tack stitching at vital stress points
• tonal stitching
• regular waist, straight leg
• relaxed fit
• 100% organic cotton PFD Twill, 290 g/m²

Go to Item

Cosmos Pant Pembroke Black Denim, 13.56 oz

77,96 €* 119,95 € -35%

Available Sizes: 32/28, 34/28

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Cosmos Pants are equipped with the following features:
• 5-pocket denim construction
• branded front center button
• zip fly
• 2 front pockets plus coin pocket at wearer's right
• Edwin patch at the rear of the waistband
• back yoke
• 2 self-fabric patch pockets at the rear
• bar-tack stitching at vital stress points
• contrast stitching
• regular waist, straight leg
• relaxed fit
• 100% cotton Pembroke denim, 13.56 oz

Go to Item

Cosmos Pant Pembroke Black Denim, 13.56 oz

95,96 €* 119,95 € -20%

Available Sizes: 30/30, 30/32, 31/30, 32/30, 32/32, 33/30, 33/32, 34/30, 34/32, 36/30, 36/32, 38/30

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

95,96 €* 119,95 € -20%

Available Sizes: 28/30, 29/28, 29/30, 30/30, 30/32, 31/30, 32/30, 32/32, 33/28, 33/30, 33/32, 34/28, 34/30, 34/32, 36/28, 36/30, 36/32, 38/30, 38/32

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Cosmos Pants are equipped with the following features:
• 5-pocket construction
• self-fabric waistband lining
• branded front center button
• zip fly
• 2 front pockets plus contrast coin pocket with printed pattern at wearer's right
• back yoke
• 2 self-fabric patch pockets at the rear
• bar-tack stitching at vital stress points
• contrast stitching
• Edwin embossed PU patch at the rear of the waistband
• regular waist, straight leg
• relaxed fit
• 100% cotton Arctic denim, 14.6 oz

Go to Item

119,95 €*

Available Sizes: 29/28, 30/28, 30/30, 30/32, 31/28, 31/30, 31/32, 32/28, 32/30, 32/32, 33/28, 33/30, 34/28, 34/30, 34/32, 36/28, 36/30, 36/32, 38/28, 38/30, 38/32

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

95,96 €* 119,95 € -20%

Available Sizes: 29/28, 31/28

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

104,45 €* 109,95 € -5%

Available Sizes: 33/28

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Bridger Short Platinum Blue Denim, 12.25oz

75,96 €* 94,95 € -20%

Available Sizes: 30, 33, 34, 36

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Bridger Shorts are equipped with the following features:
• 5-pocket denim construction
• branded front center button
• zip fly
• 2 front pockets plus coin pocket at wearer's right
• V-shaped back yoke
• 2 self-fabric patch pockets
• bar-tack stitching at vital stress points
• tonal stitching
• regular waist
• regular fit
• 100% cotton Platinum blue denim, 12.25 oz

Go to Item

Bridger Short Pembroke Black Denim, 13.56oz

80,70 €* 94,95 € -15%

Available Sizes: 30, 31, 32, 34, 36

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Big Shirt LS

44,98 €* 149,95 € -70%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Big Shirt's features include:
• yarn dyed plaid pattern
• turn-down collar
• button front closure
• dual chest pockets with snap button closure at flaps
• straight bottom hem
• button cuffs
• Edwin woven flag label at left side seam
• relaxed fit
• 100% cotton heavy brushed flannel, 210 g/m²
• made in Portugal

Go to Item

Big Shirt LS

44,98 €* 149,95 € -70%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Big Ox Shirt LS

71,47 €* 129,95 € -45%

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Edwin Big Ox Shirt LS - features:
• turn-down collar
• button front closure
• tonal Japanese Edwin branding embroidered at left chest
• straight bottom hem
• button cuffs
• loose fit
• 100% cotton Oxford weave, 175 g/m²
• made in Portugal

Go to Item

Bazz Shorts Dobby Check

91,96 €* 114,95 € -20%

Available Sizes: 30, 31, 33, 34

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Edwin Bazz Shorts Dobby Check - features:
• sturdy self-fabric belt loops at the waistband
• interior front center hook closure
• zip fly
• reinforcing waistband lining
• pleats
• 2 large front pockets
• 2 signature chino-style welt pockets with button closure at the rear
• regular fit
• 67% polyester, 32% viscose, 1% elastane dobby, 270 g/m², with yarn dyed plaid pattern

Go to Item

Basic Stripe T-Shirt

43,96 €* 54,95 € -20%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Basic Stripe Tee's features include:
• rib crew neck with interior tape
• Edwin Japanese Sun branding printed on left chest
• relaxed fit
• 100% cotton single jersey, 170 g/m², with yarn dyed stripe pattern

Go to Item

Bandana

11,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Bandana is the best way to mask before you do a drive-by shooting with your new water gun. 100% cotton.

Go to Item

Bamba Pant Sketch Black Denim, 10.32oz

113,95 €* 119,95 € -5%

Available Sizes: 29/30, 33/30, 34/30, 36/30

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Bamba Pants are equipped with the following features:
• 5-pocket denim construction
• branded front center button
• zip fly
• 2 front pockets plus coin pocket at wearer's right
• Edwin PU patch on the rear of the waistband
• V-shaped back yoke
• 2 self-fabric patch pockets at the rear
• bar-tack stitching at vital stress points
• tonal stitching
• regular waist, tapered legs
• loose fit
• 100% cotton denim, 10.32 oz (including 20% recycled cotton)

Go to Item

Bamba Pant

101,95 €* 119,95 € -15%

Available Sizes: 30/30, 31/30, 32/30, 33/30, 34/30, 36/30, 38/30

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Bamba Pants are equipped with the following features:
• 5-pocket denim construction
• branded front center button
• zip fly
• pleats
• 2 deep front pockets
• Edwin PU patch on the rear of the waistband
• V-shaped back yoke
• 2 self-fabric patch pockets at the rear
• bar-tack stitching at vital stress points
• tonal stitching
• regular waist, tapered legs
• loose fit
• 100% cotton Arctic Blue Denim, 14.6 oz

Go to Item

Bamba Pant

111,96 €* 139,95 € -20%

Available Sizes: 30/30, 31/30, 32/30, 33/30, 34/30, 36/30, 38/30

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Balmy Jacket

179,95 €*

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Edwin Balmy Jacket - features:
• curved stand-up collar
• front zipper with custom pull
• raglan sleeves
• 2 self-fabric patch pockets at lower front
• stretch cuffs and bottom band
• Japanese-style graphics embroidered all over
• relaxed fit
• 100% polyester fleece, 400 g/m²

Go to Item

Attakai Puffa Jacket

231,96 €* 289,95 € -20%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Attakai Puffa Jacket puts a premium twist on cold weather protection with an uncompromised classic aesthetic. This vintage design is equipped with quilted chambers as well as midweight padding.

Edwin Attakai Puffa Jacket - features:

• high-necked colla
• metal front zipper with custom pull
• 2 welt pockets with snap button closure at lower front
• elastic bottom hem
• stretch cuffs
• interior chest pocket with hook and loop fastener at wearer's left
• Edwin woven label at left front pocket
• regular fit
• shell: 100% cotton 8 wale corduroy, 300 g/m²
• lining: 100% polyester
• insulation: 100% polyester

Go to Item

Ander Shirt Longsleeve

127,96 €* 159,95 € -20%

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Edwin Ander Shirt - features:
• turn-down collar
• button front closure
• self-fabric patch pocket at left chest
• straight bottom hem
• button cuffs
• Edwin woven label at chest pocket
• relaxed fit
• 100% cotton 8 wales corduroy, 360 g/m²

Go to Item

Analogue Metaphor T-Shirt

32,46 €* 49,95 € -35%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Analogue Metaphor T-Shirt's features include:
• rib crew neck with interior tape
• Edwin's Analogue Metaphor artwork printed on front
• relaxed fit
• 100% cotton single jersey, 160 g/m²
• made in Portugal

Go to Item

Aluminium Water Bottle

14,96 €* 19,95 € -25%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Aluminum Water Bottle by Edwin is more than just a drinking bottle - it's a symbol of environmentally conscious design and high functionality. This insulated bottle, made from recycled aluminum, is an excellent solution for those who value sustainability and quality.

The use of recycled aluminum makes the Aluminum Water Bottle by Edwin an environmentally friendly choice. Aluminum is not only lightweight and durable, but also completely recyclable, which significantly reduces the ecological footprint. By reusing materials, this Edwin water bottle helps to conserve resources and minimize waste.

The insulating properties of the Aluminum Water Bottle by Edwin ensure that drinks remain at the desired temperature for some time. Whether it's cold water on a hot summer's day or a warm drink during the winter months, this bottle keeps all drinks at the perfect temperature at all times. The double-wall construction prevents condensation and keeps the outside of the bottle pleasantly dry and easy to grip.

A special highlight of the Edwin Aluminum Water Bottle is the snap hook on the screw cap. This functional addition makes it easy to attach the bottle to rucksacks, belt loops or other items of equipment, making it an ideal companion for outdoor activities, hikes or everyday use. The screw cap also ensures a secure and tight closure that prevents leakage.

The simple yet stylish design of the bottle reflects Edwin's philosophy: timeless aesthetics combined with high functionality. The sturdy aluminum construction ensures that the bottle can easily withstand the demands of everyday life. Whether for sports, in the office or when traveling - the Edwin Aluminum Water Bottle by Edwin is always a reliable companion.

Go to Item

Allover Sweater

127,96 €* 159,95 € -20%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Edwin Allover Sweater is a premium knit item made from soft wool blend yarn, equipped with rib-knit crew neck, cuffs and bottom band as well as an allover jacquard graphic. Relaxed fit; 80% fine wool, 20% polyamide soft knit yarn.

Go to Item

EDIFICE

ECB-2000DD-1AEF

142,96 €* 219,95 € -35%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the EDIFICE WINDFLOW ECB-2200DD - a chronograph with a digital-analog combination in racetrack style - you can feel the thrill of the Formula 1 race track. The side view conveys the feeling of the airstream on a Formula 1 racetrack and the striking, multi-dimensional mechanical dial lends a look of speed. The carbon fiber-reinforced synthetic resin case makes the watch robust and lightweight at the same time - for a design that's very comfortable to wear. The four openings on the strap are reminiscent of the air vents on sports cars and ensure greater breathability when wearing the watch. You can easily synchronize data with your smartphone via Bluetooth® or access functions that are extremely important for racing teams via an app, such as automatic setting to the second, effortless setting of world time, transfer of stopwatch data accurate to a thousandth of a second for up to 200 lap times to the smartphone, and Super Illuminator function for illuminating the analog dial. The EDIFICE ECB-2000DD can be charged by solar cells in sunlight or the light of neon lamps, storing enough charge for up to 7 months of normal use. The scratch-resistant sapphire crystal ensures a high level of durability that can withstand even the inevitable bumps and scratches of driving.

EDIFICE ECB-2000DD-1AEF - Features/Specifications:

• Case size (L x W x H): 47.6 × 48.2 × 11.9 mm
• Weight: 126 g
• Case and bezel material: Carbon/stainless steel
• Stainless steel bracelet with triple-folded one-touch clasp
• Water-resistant up to 10 bar
• Power supply: Tough Solar (solar operation)
• Bluetooth® function: Mobile Link (wireless connection via Bluetooth®)
• App connectivity function
• Automatic time setting
• Simple setting of the watch
• approx. 300 world time cities
• Data transfer from the stopwatch
• Time and location
• Phone finder function
• Glass: Mineral glass
• Surface treatment: ion-plated case and bracelet
• Adjustable strap size: 150 to 205 mm
• Neobrite
• World time: 38 time zones (38 cities + coordinated world time), display of city code, display of city name, summer time on/off, automatic summer time changeover, change between home city/world time city
• Stopwatch: 1/100 sec. stopwatch
• Measuring capacity: 00'00''00~59'59''99 (for the first 60 minutes) / 1:00'00~23:59'59 (after 60 minutes)
• Countdown timer - unit of measurement: 1 second / countdown range: 60 minutes / countdown start time input range: 1 second to 60 minutes (steps at intervals of 1 second and 1 minute) / progress tone
• Alarm: 5 daily alarms (with progress beep) / hourly time signal
• Illumination: Double LED light - LED illumination for the dial (Super Illuminator, selectable illumination duration 1.5 seconds or 3 seconds, afterglow) / LED backlight for the digital display (Super Illuminator, selectable illumination duration 1.5 seconds or 3 seconds, afterglow)
• Light color: LED white
• Fully automatic calendar (up to 2099)
• Mute function
• Power saving function (display is switched off to save power when the watch is in the dark)
• Battery level indicator
• Approximate battery life: 7 months with rechargeable battery (operating time in normal use without exposure to light after charging) / 18 months with rechargeable battery (operating time in complete darkness with activated power saving function after full charge)
• Accuracy: ±15 seconds per month (without Mobile Link function)
• 12/24 hour format
• Day display (weekdays selectable in six languages)
• Pointer adjustment function (hands move to allow an unobstructed view of digital content)
• Regular timekeeping: Analog: 2 hands (hours, minutes; hand moves every 20 seconds)
• Countdown alarm
• Digital: hours, minutes, seconds, 12 hours (pm), date, day
• Progress beep on/off

Go to Item

Eddie Chacon

Sundown T-Shirt

29,99 €* 39,99 € -25%

Available Sizes: M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Eddie Chacon Sundown Tee is equipped with the following features:
• rib crew neck with interior tape
• Eddie Chacon Sundown artwork printed on left chest and on the rear
• regular fit
• 100% cotton heavyweight single jersey
• limited edition

Go to Item

WARM4

1.235,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The WARM4 is a professional analogue rotary DJ mixer with four channels, developed and produced by ECLER in Barcelona.
It has 4 phono/line channels, 2 microphone inputs, classic sharp filters and a 4th order isolator. The WARM4 also includes a unique feature: an analogue subharmonics synthesizer that can be selected per channel and is specifically designed to generate and amplify ultra-low frequencies.
The WARM4 is ECLER's latest analogue rotary mixer, inspired by New York's disco "Paradise Garage", also referred to by François Kevorkian as the "Temple of Music", whose influence has been instrumental in shaping some of today's best clubs. Designed and manufactured in the Barcelona factory, the WARM4 is a mixer that keeps the classic structure of ECLER mixers in mind, but incorporates completely redesigned circuitry and mechanics. This ranges from new circuit boards that further improve the noise floor and dynamic range, to the rotary pots that are carefully hand-assembled by our production team.
Staying true to the innovative spirit since the first A4 mixer in 1971, ECLER presents a DJ tool never before included in a mixer: an analogue subharmonics synthesiser. Inspired by the original device from the "Paradise Garage" DJ booth, we have developed our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the DJ can adapt it individually to the track and the respective sound system.
The WARM4 also features the 4th order isolator already included in the WARM2, as well as 4 mixing channels, 3-band equaliser with full cut per channel and high quality potentiometers from Alps with metal axis. Using an external effects module has also never been easier. The WARM4 can output a PRE/POST fader signal and lets you control and pre-listen to the return signal.
The WARM4 is designed specifically for sound systems that can reproduce subsonic frequencies - for clubs, festivals and events where bass response is crucial.
Unleash a whole new dancefloor experience and take the music experience to the next level!

Technical details:
AUDIO PERFORMANCE
INPUTS:
-
Number of inputs:
LINE: 4 stereo unbalanced inputs
PHONO: 4 stereo unbalanced inputs
MIC: 2 mono balanced inputs
FX RETURN: 1 stereo unbalanced input
Connection types:
LINE 1-2-3-4: RCS STEREO
PHONO 1-2-3-4: RCS STEREO
MIC 3: XLR3-F
MIC 4: Combo XLR3-F/6.3mm jack balanced
FX RETURN: RCS STEREO
Input sensitivity nominal / impedance:
LINE: 0 dBV / 50kΩ
PHONO: -40 dBV / 50kΩ
MIC: -50 dBV / >1kΩ
FX RETURN: 0 dBV / >6kΩ
POWER:
-
Frequency response:
LINE: 10Hz÷30kHz -1dB
MIC: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB
THD+N:
LINE: <0.004%
MIC: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%
CMMR (Common-Mode Rejection Ratio):
MIC: >75dB at 1kHz
Signal-to-noise ratio:
LINE: >105dB
MIC: >90dB
PHONO: >100dB
FX RETURN: >110dB
Trim control / tone control for inputs 1-2-3-4:
INPUTS 1-2-3-4: ±15dB
BASS: +10/-30dB
MIDDLE: +10/-25dB
TREBLE: +10/-30dB
Trim control / tone control for the isolator:
BASS: +12/-70dB
MIDDLE: +12/-40dB
HIGH: +12/-70dB
Sound filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MIDDLE: 200Hz÷6.8kHz
HIGH: 6.8kHz
Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz÷4kHz
MIDDLE:
HIGH: 4kHz
Analogue subharmonics synthesiser:
Input selective filter: 50÷120Hz
Harmonics synthesis: 25÷60Hz
Maximum output level: +12dBV
OUTPUTS:
-
Number of outputs:
HOUSE: 1 stereo balanced outputs / 1 stereo unbalanced outputs.
BOOTH: 1 stereo balanced outputs / 1 stereo unbalanced outputs
HEADPHONES: 2 stereo unbalanced outputs
FX SEND: 1 stereo unbalanced output
REC: 1 stereo unbalanced output
Connection types:
HOUSE: XLR3-M STEREO / RCS STEREO
BOOTH: XLR3-M STEREO / RCS STEREO
HEADPHONES: jack stereo 6.3mm / jack stereo 3.5mm
FX SEND: RCS STEREO
REC: RCS STEREO
Output level / Minimum load:
HOUSE (balanced): 0dBV/600Ω 1V *(+12dB 4V).
HOUSE (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (balanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ
Maximum undistorted output level:
HOUSE (electrically balanced): 21dBV (23dBu)
BOOTH (electrically balanced): 21dBV (23dBu)
HOUSE (unbalanced): 21dBV (23dBu)
BOOTH (unbalanced): 21dBV (23dBu)
ELECTRICAL
Power supply: Internal
AC mains voltage: 90-264VAC 47-63Hz
AC mains plug: 15A IEC inlet plug
Rated power consumption: 39 VA
OTHER
Control mode: Rotary with Alps Blue Velvet potentiometers and Alps RK09L potentiometers
Phantom power: 18VDC/5mA max (ON by default)
Input VU meter: LED 12 segments (-38dBV ÷ +10dBV)
House Mix Booth VU meter: LED 12 segments (-30dBV ÷ +20dBV)
Subharmonics output VU meter: LED 3 segments (-20dBV / 0dBV / +4dBV)
PHYSICAL
Operating temperature: -5˚C ÷ 45˚C
Operating humidity: 20 - 90% RH (no condensation).
Storage temperature: -10°C ÷ 50˚C
Storage humidity: <90% RH (no condensation)
Installation options: Desktop or rack mounting with optional accessories.
Accessories included: IEC cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm
Weight: 5.32 kg
Shipping dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm
Shipping weight: 6.74 kg

Go to Item

WARM2

649,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Two-Channel Analogue Rotary Mixer

WARM2 is a professional two-channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring two phono/line channels and a micro/line channel, classic sharp filters, a 4th order Isolator and a narrow portable format, it will deliver a warm and crystal clear analogue sound. All circuits are strictly designed, mounted and tested at Ecler facilities in Barcelona, in order to offer the best professional grade in quality and reliability. With over 50 years of experience in analogue audio design and for the first time after 13 years, Ecler proudly presents our WARM2 rotary mixer.

Key features:
• 2+1 Mixing channels
• 1 MICRO input
• 2 PHONO inputs
• 3 LINE inputs
• Master Output (HOUSE) on XLR and RCA connectors
• Booth Output on RCA connectors
• 6.3mm J ack and 3.5mm mini-jack Headphone Monitor Outputs
• 3 band full cut EQ for main channels and 2 band full cut EQ for MICRO/LINE channel
• 3 bands isolator (300Hz and 4KHz, -∞ /+12dB, 4th order 24dB/oct )
• Maximum Output without distortion: 21dBV (23dBu)
• Mechanized from a solid block of aluminum knob, without visible screw. Ecler Unique design
• Alps Blue Velvet Potentiometers
• FX Send control and Pre/Post fader selector
• Screen-printed faceplate by selective anodizing
• Wooden side panels included

Technical data:
• Control Mode: Rotary with Alps Blue Velvet Potentiometers
• Phantom Voltage: 18VDC/5mA Max (Default ON)
• MIX and PFL VU-Meter: LED 12 segments (-30dBV ÷ +20dBV)
• Operation Temperature: -5˚C - 45˚C / 23˚F - 113˚F
• Humidity: 20 - 90% RH (no condensation)
• Mains voltage: 90-264VAC 47-63Hz
• Rated power consumption: 30VA
• Dimensions (without wooden sides): 400 x 185 x 100mm / 15.7” x 7.2” x 3.9”
• Weight: 3.6Kg / 7.94 lbs

Go to Item

Nuo 2.0

415,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the mixed music style.
Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features!

Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.

Key features:
• 2 mixing channels
• 1 MICRO/LINE channel
• 2 PHONO inputs
• 3 LINE inputs
• Master output XLR and RCA
• Booth output RCA
• 3 band full cut EQ
• Extra large ergonomic EQ knobs
• 3 band EQ kill switches
• FX Send control per channel
• FX Pre/Post fader selector
• 45mm long life VCA faders
• 45mm long life VCA crossfader
• Fader and crossfader shape adjustment
• Crossfader Reverse and Cut-In
• Crossfader suitable for ETERNAL

Technical data:
• Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kΩ
PHONO: -40dBV/50kΩ
MICRO: -50dBV/>1kΩ
FX RETURN: 0dBV/>6kΩ

• Outputs Level/Minimum Load:
MASTER (BAL): 0dBV/600Ω 1V *(+6dB 2V)
MASTER (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
BOOTH (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ

• Frequency Response:
LINE: 10Hz÷30kHz -1dB
MICRO: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB

• THD+N:
LINE: <0.07%
MICRO: <0.1%
PHONO: <0.15%
FX RETURN: <0.05%

• CMRR:
MICRO: >70dB @ 1kHz

• Signal Noise Ratio:
LINE: >95dB
MICRO: >85dB
PHONO: >90dB
FX RETURN: >100dB

• Gain control:
INPUTS 1-2: ± 15dB
INPUT 3: ± 20dB

• Tone control Inputs 1-2:
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

• Tone control Input 3:
BASS: ± 15dB
TREBLE: ± 15dB

• Kill Filter, cut frequency at –6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz÷6.8kHz
TREBLE: 6.8kHz

• Phantom voltage: +18VDC/5mA max.
• Mains: 90-264VAC 47-63Hz
• Power consumption: 30VA
• Dimensions: 370x165x80mm
• Weight: 3kg

Go to Item

Eternal Crossfader

175,00 €*

Birmingham Black Barons 1948 Vintage Ballcap

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ETERNAL Crossfader is an inductive fade technology based on a magnetic control patented by Ecler. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field created between two sets of coils. This electromagnetic modulation controls an assigned Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless technology is combined with a custom high quality glides mechanism to offer a very smooth touch and succeed the most accurate Crossfader system.

The ETERNAL concept does have obvious advantages upon other existing Systems using optical technology. Unlike optoelectronic elements, the inductive concept is resistant to smoke, moisture, temperature and aging. Other electromagnetic systems found on the market are particularly sensible to the lateral room of the mechanism, and have heavier mobile elements (magnets or iron plates) that add an excessive weight to the crossfader. Such systems usually have a strange feel that can bother highly precise manipulations such as Scratching and Beat Juggling.

Field technology tested over 20.000.000 Operations, Eternal Crossfader is the revolutionary fader admired for turntablism djs and hip hop community. Suitable with NUO2.0, and the NUO3.0, NUO4.0 and HAK Series legacy products.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Go to Item

Ebbets Field Flannels

61,71 €* 94,95 € -35%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Birmingham Black Barons 1948 Vintage Ballcap, Ebbets Field Flannels offers an authentic replica of the '48 season hat that will make a noise in the world of those who are able to recognize the difference of fake and real.

Ebbets Field Flannels Birmingham Black Barons 1948 Vintage Ballcap - Features:

• 6-panel construction
• Birmingham Black Barons felt logo patches on front
• tonal eyelet stitching at vent holes
• flat visor with green bottom
• adjustable leather strap with antique metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill
• hand-sewn from genuine baseball cloth, made in USA

Go to Item

Eazy-E

Logo T-Shirt

26,99 €*

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Eazy E Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• classic Eazy E photo with logo printed on front
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

Eazy-E

Compton T-Shirt

19,99 €*

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Eazy-E Compton Tee is equipped with the following features:
• rib crew neck with interior tape
• Eazy-E Compton artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Eagles

Hotel California T-Shirt

19,99 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Eagles Hotel California Tee's features include:

• rib crew neck
• Hotel California artwork printed on front
• relaxed fit
• 100% cotton

Go to Item

VC80 Schallplattenklemme

24,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VC150 Schallplattenklemme

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VC150 Schallplattenklemme

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stereo Audiokabel 3,5mm auf Cinch (Stecker - Stecker) 1,5m

11,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ST40 LP-Ständer

24,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PST330 Stabilizer

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Perfect Sound Stereo-Cinchkabel 1,5 m

18,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Perfect Sound Stereo-Cinchkabel 0,75 m

13,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Highend-Stereo-Cinchkabel 2 x 0.6 m

49,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Highend Dual Absorber (Set of 4)

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ED32 Silikon-Elastomer Dämpfer (4er-Set)

8,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Duo Kopfhörerhalter

7,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Antivibe Geräte-und Boxenfüsse (Set of 4)

6,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

3,5mm Klinke Audiokabel Stereo (Stecker - Stecker) 1,5m

6,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

LP | 2024 | CZ | Original (BMG Rights Management)

Dustin Kensrue

Desert Dreaming

26,99 €*

Release: 2024 / CZ – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylophone S-1 Carry Case

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PICK UP AND PLAY ON THE GO

Stylophone S1 Carry Case

EMBOSSED LOGO: Embossed logo on front
PERFECT FIT: Your Stylophone fits neatly and securely into the case.
PROTECTION: The Carry Case is made of EVA to protect your Stylophone
ZIP TAGS: with Stylophone logo
MESH: The Stylophone Carry Case has an internal black mesh which can store accessories

The Stylophone S1 fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S1 synthesizer

Go to Item

Stylophone S-1 Bowie Carry Case

11,19 €* 15,99 € -30%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OFFICIAL BOWIE STYLOPHONE CARRY CASE

Bowie Stylophone Logo on the front

SPECIAL SECURE FIT DESIGN

Special secure-fit design – Made from stress-resistant EVA Internal mesh pocket for accessories

BOWIE ZIPPER TAG

Embossed Bowie logo and Stylophone logo zip tags

The Stylophone S-1 Bowie fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S-1 Bowie synthesizer

Go to Item

Stylophone S-1 Bowie

37,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

Go to Item

Stylophone S-1

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

STYLOPHONE S1
THE ORIGINAL POCKET SYNTHESIZER
The unique sound of the Stylophone has been used by everyone from Bowie to the White Stripes.

The latest Stylophone features the same iconic, analog sound as the original, first released in 1968.

The Stylophone is easy to play, keyboard operated and you can take it anywhere!

EASY TO PLAY
Play by tapping and sliding the connected stylus along the touch-sensitive metal surface. Each segment on the surface plays a different note. It’s easy to play, perfect for beginners and experienced musicians!

PORTABLE & BATTERY-POWERED
At less than 12cm wide, the Stylophone will fit right in your coat pocket. It runs on 3 x AA batteries, and features a built-in speaker and headphone socket – so you can play it everywhere you go.

CONNECT TO YOUR OTHER GEAR
Connect the Stylophone to your computer and other gear to enhance your sound possibilities! Use a 3.5mm Stereo cable to connect into the line input on your PC, and use your preferred software to record and manipulate your Stylophone sounds.

Video: https://youtu.be/qJ1D35aYiv0

Go to Item

Stylophone Gen X-1

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

STYLOPHONE GEN-X1
EXPAND YOUR MUSICAL HORIZONS
Packed with features, the Stylophone Gen X-1 portable analogue synthesizer is the next generation. From quirky beats to haunting melodies, you can twist and warp every note in the palm of your hand.

Beginner or music pro, if you like the synth sound you’ll love the Stylophone Gen X-1

PLAYABILITY
Two ways to make sounds with the stylus. The keyboard to make distinct notes and the sound strip to slide between notes on a scale.

PORTABILITY
Take this synth anywhere. Battery operated with built in speaker. Audio line out for headphones and/or external speaker. Audio in to use as an effects unit.

ENRICH THAT SOUND
New features include, LFO (with square and triangle waves), Low pass filter (cutoff/resonance), Envelope (attack/decay).

ANALOG DELAY FEATURE
Add space to your sound with delay time, feedback and level.

ADDED FEATURES
Sub octaves -1 & -2 switch, enrich your sound by adding a second frequency below your source sound. The Pulse Width Modulation button can be used to create a chorus effect.

CONNECTIVITY
Connect the Stylophone Gen X-1 to your computer and other gear to enhance your sound possibilities! Sound from effects pedals, samples from your phone, and other music gear can be twisted and warped with the Stylophone Gen X-1.

Video: https://youtu.be/JicPeSVO8Io

Go to Item

CS 800

999,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

CS 618Q

1.199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MANUAL HIFI-TURNTABLE

For decades, direct-drive turntables from Dual have been renowned for their quality and reliability. The rumble free direct-drive in the CS 618Q keeps the RPM totally stable, while operating without noise or vibration.

The advanced twin gimbal precision tonearm is partnerd with an Ortofon 2M Blue pickup.

The turntable comes with an auto-stop feature that includes an automatic tonearm lift to reduce wear and tear on the needle as it moves to the end of the record.

DETAILS:
Plinth: Solid MDF
• Surface Options: Vinyl veneer, Gloss paint, Walnut veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dustcover

Platter: Aluminium Die-cast
• Heavy aluminium die-cast platter
• Heavy rubber mat for resonance damping
• Hardened steel spindle integrated into the direct-drive

Tonearm: Twin Gimbal Design
• Autostop function with an automatic tonearmlift
• Solid aluminium construction with precision pivot ball-bearing
• Adjustabel trackingforce and antiskating

Drive: Direct-drive
• Quartz stabilised, high end direct-drive
• No vibrations through coreless inductors
• Double shielded Rotormagnets to eliminate any stray magnetic fields

TECHNICAL DATA:
Drive:
• Drive: Direct-drive
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,07 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Auto-Stop / Auto Tonarmlift
• Bearing: 4 x Pivot ball-bearing /twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Blue

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 1450 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 7 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-618Q_manual_V6_DE_EN.pdf

Go to Item

CS 529

999,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UNCOMPLICATED WITH COMFORT
The CS 529 combines ease of use of a fully automatic turntable with high-end solutions such as precision pivot ball-bearings in a twin gimbal tonearm.

The operation is just as straight forward as every automatic turntable; the tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

All turntable functions can be controlled via the terminal or remotely operated via the Bluetooth signal, which also transmits the music data. The relevant app can be installed on any smart device to enable you to control the entire turntable remotely. This is the first product world-wide with such a feature.

DETAILS:
Plinth: Solid MDF
• Subchassis construction with rubber dampers
• Bluetooth for audio and remote-control functions
Platter: Aluminium
• Aluminium die-cast, long term precision
• Heavy rubber mat for resonance damping
• Hardened steel spindle in a brass bushing
Tonearm: Twin Gimbal Design
• All functions are fully automatic or manual
• Solid aluminium gimbal construction
• Pivot ball-bearings
Drive: DC- Motor / Belt
• Optical speed control at the motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Bluetooth Remote Control / Automatic
• Bearing: 4 x ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g bis 4 g
• Cartridge Weight Range: 5 g bis 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: Bluetooth Bluetooth 5.2 aptXT HD Audio.
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: D: 415 mm / H: 400 mm
• Weight: 6,7 kg
• Power plug AC / DC: External power supply

Go to Item

CS 518

699,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MANUAL HIFI-TURNTABLE WITH FULL CARDAN TONEARM

For the true Vinyl Enthusiast, the CS 518 is equipped with a twin gimbal tonearm design using pivot ball-bearings for optimal precision.
This superior tonearm has the ability to guide even high end pickups with the greatest degree of precision and reliability.
The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Twin Gimbal Design
• Straight, statically balanced
• Solid aluminium construction with precision pivot ball-bearing
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: 4 x Pivot ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,9 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-518_manual_V4_DE_EN.pdf

Go to Item

CS 429

649,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FULLY AUTOMATIC HIFI-TURNTABLE

The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

The CS 429 has a fully adjustable tonearm. This provides the option to change the pickup in the future and to alter the trackingforce and anti-scating accordingly.

The internal rubber damping construction decouples the tonearm and platter from external vibrations. This very quiet platform pro-vides an excellent sound performance combined with precise, optical speed control.

DETAILS:
Plinth: Solid MDF
• MDF construction with internal vibration absorber
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• All functions can be fully automatic or manual
• Solid aluminum construction with ball-bearings
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Precise optical speed control
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 6,2 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-429_manual_V4_DE_EN.pdf

Go to Item

CS 418

549,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

THE MANUALRECORD PLAYER ENTRY

Emphasis on high component precision is a feature of the entire range of Dual products. This is the case for the entry model CS 418, which uses the same platform as the higher models in the product range.

The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

The CS 418 is not attractive just because it is excellent value for money, but it also offers a superb and compelling balanced sound experience and a 5 year warranty for long term ownership.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• Solid aluminium construction with ball-bearings
• Damped tonearmlift
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,8 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-418_manual_V4_DE_EN.pdf

Go to Item

CS 329

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

Go to Item

Dropkick Murphys

Jolly Roger T-Shirt

21,84 €* 22,99 € -5%

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dropkick Murphys Jolly Roger Tee is equipped with the following features:
• rib crew neck with interior tape
• Jolly Roger artwork printed on front and back
• regular fit
• 100% cotton single jersey

Go to Item

Technics 7" Performance Edition Slipmat

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" Scratch Edition V2 Slipmats

44,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" Scratch Edition Slipmats

44,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" Mix Edition Slipmats

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" Disc Mats

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" 50th Limited Edition Slipmats

35,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" 50th Limited Edition Slipmats

35,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics 12" 50th Limited Edition Slipmats

35,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Big Donuts 7" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Tablecloth 12" Slipmats Mix-Edition

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Go to Item

Kuttin' Donuts 7" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dr. Suzuki 7" Turntable Training Mat

20,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dr. Suzuki, Stokyo and Turntable Training Wax give you a traditional style portable 7 inch slipmat with 2 slip sheets included!
Specially cut to fit the Solid Cutz Vestax, PT01 and stock platters.
*****
Dr. Suzuki introduces a new Kuttin' Donut 7" Scratch Performance slipmat, made for Turntable Training Wax!
By using his patent materials Dr. Suzuki is able to have the record sit as flat and thin as possible to the slipmat/platter.
If you experience any doming or warped records, the center label cut out on the slipmat allows the record to sit snug into the slipmat to lessen any wobble/warp issues!
The long-awaited 7 inch Slip Sheet from Dr. Suzuki has been downsized and made carefully with selected materials similar to the classic and popular 12 inch version. Place between the slip mat platter for smoother record control!

Go to Item

7" Skratch Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

12" Slipmats Mix-Edition

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The excellent Dr. Suzuki Slipmats are now available in blue!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Go to Item

12" Slipmats Mix-Edition

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The excellent Dr. Suzuki Slipmats are now available in green!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Go to Item

12" Skratch Slipmats

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

Zeffir 5i

169,95 €* 199,95 € -15%

Available Sizes: EU 40, 41, 42

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Zeffir, Dr. Martens has broken up the silhouette of a casual design and redesigned it in a bold way. The upper of the Dr. Martens Zeffir is made from glossy buttero leather, while the most eye-catching feature is the unique racing system: The front and side lace hoops are designed to cross each other in all directions to create a chaotic remix effect. The foundation is a BEX sole with even stronger setting and edges; the high-cut shape combined with the command tread creates a tough aesthetic. The legendary Dr. Martens sole, which has provided great walking comfort since 1960 thanks to integrated air chambers, has proven to be abrasion-resistant, oil-resistant and offers good grip.

Dr. Martens Zeffir 5I - features:

• glossy buttero leather upper
• leather lining
• metal eyelets at the 5 eye lacing
• heat-sealed upper and sole
• Dr. Martens' signature air-cushioned, stitched rubber sole
• sole thickness at heel: approx. 3.5 cm

Go to Item

Zeffir 3I

139,96 €* 199,95 € -30%

Available Sizes: EU 39, 40, 41

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the Zeffir, Dr. Martens has broken up the silhouette of a casual design and redesigned it in a bold way. The upper of the Dr. Martens Zeffir is made from soft Wanama leather, a popular material at Martens, which is easy to wear. The hairy leather of the vamp is decorated with an original animal print inspired by a fictional creature. The shiny metal eyelets on the upper holes of the 3 eye lacing add a stylish accent that defines the character of the Dr. Martens Zeffir. The foundation is a BEX sole with even stronger setting and edges; the high-cut shape combined with the command tread creates a tough aesthetic. The legendary Dr. Martens sole, which has provided great walking comfort since 1960 thanks to integrated air chambers, has proven to be abrasion-resistant, oil-resistant and offers good grip.

Dr. Martens Zeffir 3I - features:

• premium Wanama leather plus hairy leather upper
• leather lining
• metal eyelets at top positions of the 3 eye lacing
• heat-sealed upper and sole
• Dr. Martens' signature air-cushioned, stitched rubber sole
• sole thickness at heel: approx. 3.5 cm

Go to Item

Tarik 8 Tie Boot

151,96 €* 189,95 € -20%

Available Sizes: EU 41, 44

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dr. Martens Tarik 8 Tie Boots are a remake of the classic DM boots equipped with sturdy leather upper as well as Dr. Martens' signature air-cushioned sole that's oil-resistant and provides best comfort and durability since 1960, and also features a mudguard. This tough boots' upper and sole are heat-sealed and stitched, plus the sole also offers good abrasion and slip resistance.

Dr. Martens Tarik 8 Tie Boots - features:

• oiled premium Wyoming leather upper
• soft and breathable fabric lining
• padded collar for snug fit
• 8 eye lacing with tonal metal eyelets plus hiking boots-style riveted eyelets at top position
• hiking boots-inspired rope laces
• heat-sealed upper and sole
• Dr. Martens' signature air-cushioned, stitched rubber sole with mudguard
• AirWair woven loops at heel
• Dr. Martens label at tongue

Go to Item

Ramsey Monk KLT

136,46 €* 209,95 € -35%

Available Sizes: EU 43

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ramsey Monk by Dr. Martens is a modern rendition of classic loafers, updated with fresh details. Equipped with an upper made of premium suede in a monochrome look, Dr. Martens Ramsey Monk features an adjustable instep strap with brushed metal buckle, a fringed vamp as well as braided details at toe box for an extraordinairy look. The upper has been built on Dr. Martens' signature Bouncing Sole with Goodyear welt, while an anatomically shaped footbed noticeably increases comfort. Incidentally, the Goodyear welt seams are heat-sealed at 700°C and reinforced with the signature Dr. Martens welt stitching.

Dr. Martens Ramsey Monk KLT - features:

• upper: premium suede
• lining: 90% leather 10% textile
• adjustable instep strap with brushed metal buckle
• fringed suede vamp
• braided details at toe box
• Air Cushion sole made of 100% PVC
• recommended for normal to wide feet

Go to Item

Penton

259,95 €*

Available Sizes: EU 38, 39, 40, 43, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Penton looks back on a long tradition as an integral part of the Dr. Martens collection and is considered the counterpart to the Adrian. For the current season, Dr. Martens has reissued this sleek loafer with the raised seam in its purist version. Durable and famously stiff from the start, the smooth leather of the Dr. Martens Penton can be polished to an elegant shine or worn down for a rough vintage effect, depending on your preference. The upper has been bonded with the characteristic Bouncing Sole for maximum comfort. By the way, the Goodyear welt seams are heat-sealed at 700°C and reinforced with the characteristic Dr. Martens welt seam.

Dr. Martens Penton - features:

• premium leather upper
• lining: 60% leather, 40% textile
• Air Cushion sole made of 100% PVC
• recommended for normal to wide feet

Go to Item

Jorge II

111,96 €* 159,95 € -30%

Available Sizes: EU 37, 38, 39, 40, 41, 43, 44, 45, 46, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dr. Martens Jorge II is the perfect shoe for the summer months. The warm-weather slip-on by Dr. Martens was designed to break conventions. What can't be missed is the classic yellow welt stitching that connects the upper to the relaxed shore sole. Featuring a premium soft leather upper with a monochrome look and signature Bouncing Sole with Goodyear welt, an anatomically shaped footbed noticeably increases comfort. By the way, the Goodyear welt seams are heat-sealed at 700°C and reinforced with the characteristic Dr. Martens welt stitching.

Dr. Martens Jorge II - features:

• premium suede upper
• lining: 60% leather, 40% textile
• Air Cushion sole made of 100% PVC
• recommended for normal to wide feet

Go to Item

Isham

84,97 €* 169,95 € -50%

Available Sizes: EU 37, 39, 43, 44, 45

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Isham by Dr. Martens owes its name to a small village in Northamptonshire and is the perfect hybrid of low casual shoe and sandal. The Dr. Martens Isham is the perfect footwear item for people who don't feel like lacing up. This slip-on from the house of Dr. Martens was designed to break conventions - the flat-cut heel in combination with the strap running over the instep convey the comfort of a loafer, which is hard to top in combination with the sole. Featuring a premium soft suede upper and signature Bouncing Sole with Goodyear welt, an anatomically shaped footbed noticeably increases comfort. By the way, the Goodyear welt seams are heat-sealed at 700°C and reinforced with the characteristic Dr. Martens welt stitching.

Dr. Martens Isham - features:

• premium suede upper
• lining: 80% textile, 20% PU
• Air Cushion sole made of 100% PVC
• recommended for normal to wide feet

Go to Item

Flora

169,95 €*

Available Sizes: EU 37, 38, 39, 40, 41, 42

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A sharp take on a classic Chelsea boots silhouette, the Dr. Martens Flora Boots have been introduced in the late-70s/early-80s and feature durable leather upper, textile lining, the ultra-comfortable AirWair™ sole with Goodyear welting, signature elastic gussets at side panels as well as a branded woven loop at heel.

Dr. Martens Flora - materials:

• upper: 70% durable, smooth and polished leather, 30% elastic
• lining: 100% textile
• sole: 100% PVC

Go to Item

Emmeline

135,96 €* 169,95 € -20%

Available Sizes: EU 40

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dr. Martens Emmeline is a contemporary rendition of the classic DM boots equipped with premium leather upper as well as Dr. Martens' signature air-cushioned AirWair™ sole that's oil-resistant and provides best comfort and durability since 1960. This tough boot's upper and sole are heat-sealed and stitched, plus the sole also offers good abrasion and slip resistance.

Dr. Martens Emmeline - features:

• durable leather upper with a smooth and polished surface
• leather and textile lining (55/45%)
• metal eyelets at 8 eye lacing
• heat-sealed upper and AirWair™ PVC sole
• Dr. Martens' signature air-cushioned, stitched rubber sole
• Dr. Martens AirWair™ woven loop at heel

Go to Item

Boury

143,96 €* 179,95 € -20%

Available Sizes: EU 40, 41, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dr. Martens Boury is a reworked version of the classic DM boots equipped with PU-coated split leather with a subtle geometric emboss plus synthetic material made with 50% recycled plastic upper as well as a slightly updated of Dr. Martens' signature air-cushioned AirWair™ sole that's oil-resistant and provides best comfort and durability since 1960. This tough boot's upper and sole are heat-sealed and stitched, plus the sole also offers good abrasion and slip resistance. Additional signature details of the Dr. Martens Boury include an updated lacing with Ghilly loops and hiking boots-style hook metal rivets at top positions.

Dr. Martens Boury - features:

• upper: leather, rip-stop and synthetic, partially recycled
• soft, breathable textile lining
• lacing with Ghilly loops and hiking boots-style hook metal rivets at top positions
• heat-sealed upper and AirWair™ PVC sole
• Goodyear welt construction
• Dr. Martens' signature air-cushioned, stitched rubber sole
• Dr. Martens label at tongue
• Dr. Martens Air Wear woven loop at collar

Go to Item

Audrick 8I Boot

142,96 €* 219,95 € -35%

Available Sizes: EU 39

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Since the early '90s, Dr. Martens' platform soles have accompanied those who defy convention. Dr. Martens' new 4.8 cm Quad Neoteric sole packs the height and attitude of the infamous Quad into a new lightweight construction with a SoftWair insole for ultimate comfort. This revolutionary platform sole is made up of two parts: First, there's a lightweight EVA midsole, then there's a rugged PVC outsole with extreme lugs. This sole construction is as light as it is durable, it also offers incredible comfort. Characteristic features include grooved sidewalls, signature yellow stitching and a reinforced version of the unique Dr. Martens tread pattern.

Dr. Martens Audrick 8I Boots - features:

• nappa leather upper
• leather lining
• 8 eye lacing
• heat-sealed upper and AirWair™ PVC sole
• Goodyear welt construction
• Dr. Martens' signature air-cushioned, stitched rubber sole
• tonal piping plus Dr. Martens Air Wear woven loop at collar
• shaft height: 160 mm
• platform height: 48 mm

Go to Item

Audrick 3I Shoe

104,97 €* 209,95 € -50%

Available Sizes: EU 40

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Since the early '90s, Dr. Martens' platform soles have accompanied those who defy convention. Dr. Martens' new 4.8 cm Quad Neoteric sole packs the height and attitude of the infamous Quad into a new lightweight construction with a SoftWair insole for ultimate comfort. This revolutionary platform sole is made up of two parts: First, there's a lightweight EVA midsole, then there's a rugged PVC outsole with extreme lugs. This sole construction is as light as it is durable, it also offers incredible comfort. Characteristic features include grooved sidewalls, signature yellow stitching and a reinforced version of the unique Dr. Martens tread pattern.

Dr. Martens Audrick 3I Shoe - features:

• vnappa leather upper
• textleather le lining
• 3 eye lacing
• heat-sealed upper and AirWair™ PVC sole
• Goodyear welt construction
• Dr. Martens' signature air-cushioned, stitched rubber sole
• tonal piping plus Dr. Martens Air Wear woven loop at collar
• platform height: 48 mm

Go to Item

Adrian Snaffle

180,45 €* 189,95 € -5%

Available Sizes: EU 44

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Adrian has been a staple in the Dr. Martens range since the 1970s. For the current season, this sleek loafer with its raised stitching and significant tassels has been given a fresh update: Equipped with an upper made of premium leather, antique metal hardware detail at the instep and the signature Bouncing Sole with Goodyear welt, an anatomically shaped footbed noticeably increases comfort. Incidentally, the Goodyear welt seams are heat-sealed at 700°C and reinforced with the signature Dr. Martens welt stitching.

Dr. Martens Adrian Snaffle - features:

• upper: durable leather with polished finish
• lining: 20% leather, 80% textile
• metal latch at instep cover
• Air Cushion sole made of 100% PVC
• recommended for normal to wide feet

Go to Item

Adrian Mono

189,95 €*

Available Sizes: EU 37, 40, 41, 45

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Adrian has been a staple in the Dr. Martens range since the 1970s. For the current season, this sleek loafer with its raised stitching and significant tassels has been given a fresh update: Equipped with an upper made of premium, soft leather in a monochrome look and the signature Bouncing Sole with Goodyear welt, an anatomically shaped cork footbed noticeably increases comfort. Incidentally, the Goodyear welt seams are heat-sealed at 700°C and reinforced with the signature Dr. Martens welt stitching.

Dr. Martens Adrian Mono - features:

• upper: premium leather
• lining: 90% leather 10% textile
• Air Cushion sole made of 100% PVC
• recommended for normal to wide feet

Go to Item

2976 Mono Chelsea Boot

199,95 €*

Available Sizes: EU 37, 38, 39, 41, 42, 43, 44, 45, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A sharp take on a classic silhouette, the new Dr. Martens 2976 Mono Chelsea Boots have been introduced in the mid-70s and feature durable leather upper, textile lining, the ultra-comfortable AirWair™ sole with Goodyear welting, signature elastic gussets at side panels as well as a branded woven loop at heel.

Go to Item

2976 Hi Quad Squared

207,96 €* 259,95 € -20%

Available Sizes: EU 44, 45

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A sharp take on a classic silhouette, the new Dr. Martens 2976 Hi Quad Squared Chelsea Boots have been introduced in the mid-70s and feature durable leather upper, leather (55%) plus textile (45%) lining, the ultra-comfortable AirWair™ 4.7 cm platform sole with Goodyear welting, signature elastic gussets at side panels as well as a branded woven loop at heel.

Go to Item

1461 Mono

161,95 €* 179,95 € -10%

Available Sizes: EU 37, 38, 39, 40

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dr. Martens 1461 3-Eye is the low-top version of the classic DM boots equipped with durable leather upper as well as Dr. Martens' signature air-cushioned sole that's oil-resistant and provides best comfort and durability since 1960. This tough shoe's upper and sole are heat-sealed and stitched, plus the sole also offers good abrasion and slip resistance.

Dr. Martens 1461 Mono - features:

• durable leather upper
• textile lining
• metal eyelets at 3 eye lacing
• heat-sealed upper and sole
• Dr. Martens' signature air-cushioned, stitched rubber sole with GoodYear welted seam
• platform height: 12 mm
• heel height: 28 mm

Go to Item

1460 Mono

199,95 €*

Available Sizes: EU 37, 40, 41, 42

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Dr. Martens 1460 Mono is a remake of the classic DM boots equipped with leather upper as well as Dr. Martens' signature air-cushioned AirWair™ sole that's oil-resistant and provides best comfort and durability since 1960. This tough boot's upper and sole are heat-sealed and stitched, plus the sole also offers good abrasion and slip resistance.

Dr. Martens 1460 Mono - features:

• smooth leather upper
• leather and textile lining (25/75)
• metal eyelets at 8 eye lacing
• heat-sealed upper and AirWair™ PVC sole
• Dr. Martens' signature air-cushioned, stitched rubber sole
• tonal piping plus Dr. Martens Air Wear woven loop at collar
• shaft height: 160 mm
• platform height: 12 mm
• heel height: 28 mm

Go to Item

Dr. Dre

The Chronic T-Shirt

19,99 €*