Accessories 1139 Items

The Ortlieb Duffle RS combines high travel comfort with the extreme demands of expedition bags. For the increased requirement of heavy-duty use, a roller system was developed that is integrated waterproof into the body of the bag. The 100 mm wheels, together with the stiffened base plate made of profiled aluminum, provide optimum ground clearance, which is the ideal prerequisite for transport off paved roads. Since lightweight luggage plays an important role, especially when traveling by air, the Ortlieb Duffle RS was deliberately designed without a heavy telescopic linkage - instead, a length-adjustable handle is used, which ensures comfortable pulling behind with high legroom. The full foam padding at the bottom of the Ortlieb Duffle RS bag provides the best stability when fully loaded. Quick access to the equipment allows the waterproof TiZiP zipper running the entire length of the bag, which can be locked using the integrated wire shackle and a small cable lock, which is not included here.

Ortlieb Duffle 85L RS - details/features:

• waterproof heavy-duty construction with backpack function
• extremely abrasion and tear resistant fabric
• long, waterproof TiZip zipper (revised version) at the opening of the main compartment for easy access
• padded, removable shoulder straps can be used as carrying handle or with backpack function
• compression strap
• inside pocket with zip closure
• mesh compartment outside
• 4 holding straps for attaching further equipment
• bag can be locked with a small padlock via wire shackle on zipper (lock not included)
• dimensions: approx. 73 x 29 x 45 cm
• capacity: 85 liters
• weight: 2,790 g
• materials: PD620 & PS620C made of 100% polyester

The Patagonia Black Hole Wheeled Duffel 40L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 40L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 35.5 x 55 x 24 cm
• volume: 40 liters
• weight: 3,180 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 112 g/m²

The F/CE Technical Gadged Back Pack is a utility backpack with multifunctional compartments that has been designed with weekend journeys in mind. The front of the F/CE Technical Gadged Back Pack is equipped with an interior multi-gadget organizer pocket including a key hook plus compartments for pens, notebooks, smartphones as well as other small items and accessories, while the interior features a 17 inches laptop compartment.

The F/CE Technical Gadged Back Pack's material Robic™ offers an excellent balance between lightness and strength: Robic™ 420D is 80% lighter than Cordura 500D, yet boasts approximately 85% of the tear strength and 110% of the tensile strength, with the same abrasion resistance. The Robic™ 420D yarn has been custom-made hollow fiber, resulting in the lightweight and highly durable Robic™ Air fabric.

The F/CE Technical Gadged Back Pack is equipped with the following features:

• Mounting T system for attaching a sack or a pouch
• front compartment with organizer panels
• 2-way zippers at main compartments' openings
• 2 side pockets
• adjustable, padded, and ergonomic shoulder straps wit daisy chain straps for additional attachment options
• adjustable sternum strap with side-release buckle
• interior padded 17 inches laptop compartment
• strategically placed cushioning on the stabilized back panel for comfortable carrying
• top handle
• dimensions: approx. 33 x 54 x 25 cm
• capacity: 45 liters
• exterior fabric: 100% nylon Robic™ Air
• lining: 100% polyester

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 410 g
• dimensions: approx. 230 x 130 x 75 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

For the current season, Fred Perry introduces a collaboration with Curry & Paxton theat features two colorways of the iconic Yvan frame with a finish that has been inspired by the timeless Fred Perry Shirt.

Both Fred Perry and Curry & Paxton have a place in popular culture history which money can't buy. Two British brands gained their fame by designing iconic products: Fred Perry in 1952 with its classic polo shirt and Curry & Paxton with an unrivalled pedigree in the optical world. Both brands are synonymous with originality, and the current collaboration is an example of this common ground.

Fred Perry x Curry & Paxton Sunglasses (Made in England) - details:

• premium quality cellulose acetate from Italian manufacturer Mazzucchelli 1849
• metal hinges that are considered to be the sturdiest on the market
• lenses are from Italian lens make Divel
• 100% UV protection
• cut and handmade in East London

With the Ironman 8-Lap, and wander presents the next Timex collectible watch. The Timex Ironman was the world's first sports-oriented watch when it debuted back in 1986 - now it was time for an and wander-branded reissue!

While Timex did several reissues of this legendary watch, it's the and Wander x Timex Ironman 8-Lap that offers the most eye-catching colorway, blending a slick off white-meets-black case with a white band.

The original Timex Ironman 8-Lap became a best-seller in the first year, because of its philosophy and engineering background. Originally constructed for triathlon athletes, the Ironman was predestined to become a cultural icon.

The distinctive shape of the bezel, also known as the D-shape, with two buttons at the top directly below the circle, was groundbreaking in 1986. The styling of this Timex watch was so striking that it was simply called Ironman without having to mention the brand name.

and Wander x Timex Ironman 8-Lap - features:

• 39 mm width resin case
• 8-Lap memory, chronograph, timer, alarm, calendar
• Indiglo® night-light
• 100 meter water resistance

The Timex Archiv Expedition North Titanium Automatic Watch is ready to go the distance. Constructed with the most durable materials, the shock-resistant, 41 mm case is rendered in true Titanium, complemented by a scratch-resistant, anti-reflective sapphire crystal and 200 meters of water resistance. The Timex Expedition North Titanium Automatic Watch features a 21-jewel automatic movement and a quick-release, revolutionary Ecco™ DriTan™ leather strap that uses water-saving technology. This timepiece lives up to the Timex legacy of fully equipping you for your adventures ahead while embodying the kind of tradition you can wear every day.

Timex Archive Expedition North Titanium Automatic Watch - Features/Specs:

• Rugged Titanium Watch Case
• Watch Movement: Mechanical Automatic Wind
• Dial Markings: Arabic
• Water Resistant to 100 Meters
• Eco-Friendly Leather Strap
• Fits Wrist Circumferences: 150 - 205 mm
• Date Window
• Case Material: Titanium
• Case Finish: Beadblasted
• Case Shape: Round
• Crystal/Lens: Mineral Glass
• Water Resistance: 200 meters
• Case Width: 41 mm
• Case Height: 12.5 mm
• Strap and Lug Width: 20 mm

The Patagonia Black Hole Wheeled Duffel 40L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 40L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 35.5 x 55 x 24 cm
• volume: 40 liters
• weight: 3,180 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 112 g/m²

The Base Camp Rolling Thunder 28" from The North Face is the ultimate travel companion for adventurers seeking a rugged and well-organized bag. With a generous capacity of 95 liters, this bag is perfect for two-week vacations or extended weekend adventures. Crafted from recycled Base Camp material and featuring an improved hardshell chassis, the Rolling Thunder is built to endure even the most demanding trips. The molded wheels ensure smooth rolling even on uneven terrain. With multiple pockets, compression straps, and ergonomic handles, this bag offers flexibility and comfort for any journey.

The North Face Base Camp Rolling Thunder 28" - Features:
• Improved hardshell construction for tough travel
• Made from recycled, durable Base Camp material
• Push-button retractable handle
• Molded, durable wheels for easy rolling
• Padded side and top handles for versatile carrying options
• Compression straps to secure or compress the bag when not full
• Clamshell design with long zipper for easy access
• External webbing points for extra attachments
• Lockable zipper for added security
• Reflective details for increased visibility
• Length: 71.1 cm (28 inches)
• Internal compression panel and mesh pocket with zipper

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 415 g
• dimensions: approx. 230 x 140 x 50 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

This four-wheel trolley by The North Face is built for the modern explorer and equipped with a durable hard shell, smooth-rolling wheels and stylish rip-stop-inspired design - it sets a new industry standard for hard-sided travel luggage. When opened, it can lay completely flat thanks to a single geared hinge. Four durable wheels allow for comfortable rolling positions, the ribbing texture on the exterior ensures durability while the internal liner provides dedicated storage for clothing and valuables. The Clamshell design of the The North Face All Weather 4-Wheeler doesn’t use zippers and is waterproof, and TSA locks add protection. A waterproof TNF design and smooth-rolling, ultra-durable wheels are just two more features that make this the perfect carry-on for weekend trips.

The North Face All Weather 4-Wheeler 22 inch - features:

• 4 durable wheels allow for comfortable rolling positions
• grid-style ribbing at the exterior for durability
• internal liner provides dedicated storage for clothing and valuables
• Clamshell design doesn’t use zippers and is waterproof
• TSA locks and hard shell for added protection
• wide, extendable handle lets you comfortably roll the bag
• average weight: 4,440 g
• dimensions: approx. 24.1 x 36.2 x 57.2 cm
• capacity: 24 liters
• materials: polycarbonate shell, 840D recycled ballistic nylon, 1000D TPE fabric laminate (100% polyester), 1680D nylon

This four-wheeled travel bag is your ideal companion for adventures in all weather conditions. With a waterproof hardshell case and ultra-durable, recycled ballistic nylon, it keeps out rain and snow, ensuring absolute dryness. The spacious design offers enough room for your gear, while the retractable handle and rolling design make it easy to maneuver even when fully packed. The interior lining is designed for dirty clothes or valuables, and the absence of conventional zippers allows quick access to your gear.

The North Face / All Weather 4-Wheeler - Features:

• Waterproof hardshell case for maximum weather resistance
• Ultra-durable 840D recycled ballistic nylon
• Robust ribbed exterior for added durability
• Organizer compartments for neat storage of essentials
• TSA locks and hardshell provide extra protection
• Wide, retractable handle for easy rolling
• Volume: 24 liters
• Dimensions: 36.2 cm x 24.1 cm x 57.2 cm
• Weight: 4440 g
• Material: 100% recycled ballistic nylon

The Maharishi Maha M.A.L.I.C.E. Backpack is a premium high-capacity field pack equipped with three external ALICE-style front pouch pockets, hidden slip side pockets and securing straps underneath. The adjustable brain and double cinched lip allow approx. expansion 50% height extension, additional key features of the Maharishi Maha M.A.L.I.C.E. Backpack include substantial quilted lining all over and a suspended laptop sleeve inside.

ALICE is a modular carrying system developed by the U.S. Army during the Vietnam war era. The main feat was the lightweightness of it, resulting in a reduction in the combat soldier's overall load. It’s still widely deployed within South American and Middle Eastern troops. The M.A.L.I.C.E. bag series by Maharishi brings the spirit of ALICE into contemporary civilian domain.

Maharishi Maha M.A.L.I.C.E. Backpack - features/specs:

• top flap with adjustable, quick-release webbing straps with metal clasps
• front and side pockets with adjustable, quick-release webbing straps with metal clasps
• drawstring closure at main compartment's opening
• adjustable, padded, and ergonomic shoulder straps
• detachable, adjustable sternum strap with side-release buckle
• interior padded laptop compartment
• padded back panel
• top handle
• tonal Maharishi lettering embroidered above front pocket
• dimensions: approx. 35 x 59 x 20 cm
• exterior fabric: lightweight Japanese 500D flight nylon inspired by classic MA-1 flight jackets, which is water-repellent and resistant to abrasion, made from 100% nylon
• lining: 100% nylon
• insulation: 100% polyester, 300 g/m²

The and wander Dyneema Backpack is made of ultra-thin DSM's Dyneema composite fabric (formerly Cuben Fiber) which is made by laminating Dyneema fibers with UV resin. This fabric is used in high-performance sails for racing boats, it's ultra-lightweight, highly waterproof and tear strength.

The and wander Dyneema Backpack is equipped with the following features:

• roll-top with center strap including side-release buckle
• 2 side pockets with drawstring adjustment
• adjustable, padded, and ergonomic shoulder straps with bungee cord details
• slightly reinforced back panel
• top handle
• weight: 260 g
• dimensions: approx. 28 x 45 x 15 cm
• 100% polyethylene Dyneema
• details/trim: 100% polyester
• made in Japan

Filson Tin Cloth bags are made for traveling light and fast, with all of the weather resistance and durability that’s made Filson bags legendary. Made from waxed canvas, Filson's Tin Cloth Medium Duffle Bag is a lighter-weight bag that provides heavyweight performance.

The Filson Tin Cloth Medium Duffle is made with the brand's iconic waxed canvas that's protected foresters, sportsmen, and tradesmen from harsh weather, brush, and abrasion for more than a century. Thick cotton webbing handles are stitched down the sides of the bag for maximum strength, while the carry grip is made with saddle-grade bridle leather that will mold to the shape of your hand for decades of comfortable carry. The interior of the Filson Tin Cloth Medium Duffle Bag is equipped with nylon lining for an added layer of protection.

Filson Tin Cloth Medium Duffle Bag - Features/specs:

• made with durable Tin Cloth waxed cotton
• fully nylon-lined
• heavy-gauge metal YKK® zipper
• exterior stow pockets on each end
• cotton-webbing removable shoulder strap
• cotton webbing handles with bridle leather
• capacity: 33 liters
• dimensions: approx. 51 x 33 x 30.5 cm
• weight: approx. 1,700 kg
• 100% cotton oil finish Tin Cloth, 14 oz, with details made from bridle leather & cotton webbing
• lining: 100% nylon

For the safe transport of a laptop including accessories, the Filson Tin Cloth Compact Briefcase is an ideal solution. Fully lined with Cover Cloth, the Filson Tin Cloth Compact Briefcase is comfortably lightweight, the padding protects the laptop or a tablet up to 15 inches, the front compartment is suitable for documents, and the back compartment closes with snap buttons to keep the contents safe. Plus, the metal YKK® zipper that secures the main compartment is very sturdy and will last a lifetime.

For decades, Filson's legendary Tin Cloth with Oil Finish has been trusted by foresters, miners and sportsmen to protect against wetness and adverse conditions - so you can be sure that the contents of the Filson Tin Cloth Compact Briefcase will be well protected on the go. This British Millerain waxed canvas has been carefully impregnated with Filson's proprietary oil finish, which works to prevent rain and snow from penetrating. The tightly woven Tin Cloth has become legendary for its abrasion and tear resistance, and is the perfect material for a lighter bag that can withstand the stress of travel activities. The thick handles are made of high quality leather that has been slowly tanned in natural plant-based solutions. This process transforms the hides into saddle-tough Bridle Leather that is shiny, supple and extremely durable.

Filson Tin Cloth Compact Briefcase - features:

• YKK® metal zipper with custom pull
• front storage pocket
• compartment with snap fastener at the back
• padded compartment for 15 inch laptop
• adjustable and detachable shoulder strap
• sturdy leather handles and zipper pull handle extensions
• Filson woven label on the front
• dimensions: approx. 38 x 29 x 7 cm
• capacity: 9 liters
• materials: 100% Cotton Tin Cloth, 397 g/m², with Oiled Finish, 100% Cotton Cover Cloth, 170 g/m², with Dry Finish, 100% Cotton Tin Cloth, 298 g/m², with Dry Finish, 298 g/m², Bridle Leather & EVA Foam

The Filson Journeyman Backpack is made of oil finish Tin Cloth and Rugged Twill for water-repellent, abrasion-resistant performance. A padded back and Moleskin-lined shoulder straps offer comfortable carry throughout the day, even with heavy loads. Internal organization dividers include a padded sleeve to carry laptops and tablets up to 15 inch.

The Filson Journeyman Backpack is equipped with the following features:

• front pocket with snap button closure at flap
• hidden 2-way zipper at main compartment opening
• adjustable tin cloth/leather shoulder straps with moleskin lining
• interior divders plus padded 15 inch laptop/tablet compartment
• padded back panel
• leather top handle
• made from abrasion- and water-resistant rugged twill and 14 inch Tin Cloth with water-repellant oil finish
• measures: 32 x 44.5 x 12.5 cm
• capacity: 23 liters
• exterior fabric: 100% cotton rugged twill & tin cloth, 400 g/m², with oiled finish and leather trim
• lining: 50% cotton, 50% polyester

The Patagonia Black Hole Wheeled Duffel 70L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 70L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 35.5 x 70 x 30 cm
• volume: 70 liters
• weight: 3,550 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 102 g/m²

This spacious four-wheeled travel bag is designed for adventures in all weather conditions. Not only does it offer ample room for your gear, but the waterproof hardshell also provides superior weather resistance. The recycled ballistic nylon adds durability, while the wide, retractable handle and easy-rolling design make traveling a breeze, even when fully packed. Inside, the organizer compartments keep your essentials neatly stored. Thanks to the clamshell design without zippers, you can access your gear quickly and easily at any time.

The North Face / All Weather 4-Wheeler - Features:

• Waterproof hardshell case for maximum weather resistance
• 840D recycled ballistic nylon for added durability
• Ribbed exterior for increased longevity
• Organizer compartments for neat storage
• Clamshell design without zippers and waterproof
• TSA locks and hardshell for extra protection
• Wide, retractable handle for easy rolling
• Volume: 70 liters
• Dimensions: 45.1 cm x 33 cm x 76.8 cm
• Weight: 6180 g
• Material: 100% recycled ballistic nylon

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 445 g
• dimensions: approx. 150 x 190 x 70 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 590 g
• dimensions: approx. 275 x 200 x 100 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 640 g
• dimensions: approx. 280 x 190 x 105 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Expedition North Field Post Solar Watch is a collaboration item between Timex and and wander. The stainless steel case of the and Wander x Timex Expedition North Field Post Solar is equipped with non-reflective coated sapphire glass for visibility, while the movement incorporates a solar function that stores electricity with sunlight. The strap is made of upcycled material to reduce the environmental impact. When fully charged with a light source such as sunlight or lighting (4~5 hours as a guide), the and Wander x Timex Expedition North Field Post Solar's solar function that can operate for about 4 months even in places where there is no light.

and Wander x Timex Expedition North Field Post Solar - details:

• Case: Stainless steel with sapphire glass
• Strap: Nylon
• Water resistant to 10 ATM
• Length: 24 cm
• Width: 2 cm
• Diameter (dial): 3.5 cm
• Wrist circumference: 15 - 20.5 cm

The Patagonia Black Hole Wheeled Duffel 100L blends a functional design with a contemporary look. An exterior pocket as well as inner organizer pockets keep things handy, while this Patagonia trolley bag carries easily on dual handles or an adjustable shoulder strap.

Patagonia Black Hole Wheeled Duffel 100L - features:

• U zip closure at main compartment (opens like a book)
• interior coated divider with side-release buckles at elastic straps
• interior mesh divider with side-release buckles at elastic straps plus organizer mesh pockets with zip closure
• dual carry handles
• side wall handles
• exterior pocket with zip closure
• reinforced bottom
• protective hard shell back panel with telescope handle and skateboarding wheels
• Patagonia branding printed on front
• dimensions: approx. 40.5 x 83 x 35 cm
• volume: 100 liters
• weight: 4,220 g
• exterior fabric: 100% recycled polyester bluesign™-certified 900D rip-stop (solution-dyed) with TPU coating and DWR finish, 475 g/m²
• lining: 200D weave made from 100% recycled polyester with PU coating and DWR finish, 112 g/m²

The Porter-Yoshida & Co. Heat Sling Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Sling Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Sling Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Sling Shoulder Bag - specifications:

• weight: approx. 675 g
• dimensions: approx. 150 x 340 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 515 g
• dimensions: approx. 290 x 115 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Briefcase - specifications:

• weight: approx. 750 g
• dimensions: approx. 410 x 300 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Filson Original Briefcase is built with the brand' signature twill fabric, an industrial-strength water-repellent cloth that resists wear and abrasion for years of dependable service. The adjustable Italian cow leather shoulder strap can be removed while the Filson Original Briefcase’s large interior compartment is equipped with dividers and organizer pockets.

Filson Original Briefcase - features:

• removable, adjustable 117 cm bridle leather shoulder strap with pad
• large interior compartment with dividers
• meets standard airline carry-on size requirements
• sized to fit a standard laptop up to 15 inch
• double-layer bottom for added protection and durability
• measures: 40.5 x 32 x 10 cm
• capacity: 13 Liter
• made with abrasion- and water-resistant twill fabric, with Tin Cloth bound seams for added durability plus premium Italian cow leather
• made in EU

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 825 g
• dimensions: approx. 230 x 450 x 100 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Tote Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Tote Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Tote Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Tote Bag - specifications:

• weight: approx. 1070 g
• dimensions: approx. 380 x 380 x 180 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Boston Bag (S) - specifications:

• weight: approx. 1010 g
• dimensions: approx. 410 x 270 x 150 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Messenger Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Messenger Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Messenger Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Messenger Bag (S) - specifications:

• weight: approx. 915 g
• dimensions: approx. 305 x 255 x 120 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 2Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Briefcase - specifications:

• weight: approx. 845 g
• dimensions: approx. 385 x 270 x 60-110 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Fred Perry teamed up with turntables pioneers Pro-Ject to design three turntables with legendary Fred Perry logos, each based on the colorway of a classic Fred Perry polo shirt. Pro-Ject was founded by Heinz Lichtenegger in 1991 at a time when the CD player was taking over and vinyl was declared dead. He believed that music should be enjoyed in the simplest way possible - on a turntable. Using cutting-edge technology, Pro-Ject creates turntables that not only look stylish, but also feature the finest details. Fred Perry has collaborated exclusively on a hybrid version of two of Pro-Ject's most iconic devices: the Essential and the Debut. The Fred Perry x Pro-Ject Record Deck turntable platter has been customized with Fred Perry's 30-leaf laurel wreath, the Record Deck is equipped with a three-pin UK plug, and the Fred Perry x Pro-Ject turntable was manufactured in the Czech Republic.

The Filson 24-Hour Tin Cloth Briefcase combines time-tested, traditional materials with time-honored craftsmanship to create a bag that meets the needs of the modern business traveler. Filson has combined the capacity of the padded computer case with the sleek design of the brand's original briefcase to create a design that gets the job done, no matter where your work takes you.

Filson's legendary oil-finished Tin Cloth has proven itself for decades protecting foresters, miners and sportsmen from wetness and adverse conditions - so you can be sure your gear is well protected on all your travels. British Millerain's Duck canvas is thoroughly impregnated with Filson's oil finish wax, repelling rain, snow and mud. The Tin Cloth's tight weave boasts high abrasion and tear resistance, making it the ideal material for a lighter bag that will stand the test of time. The handles are cut, burnished and edge-dyed at the Filson factory in Seattle using vegetable-tanned leather from Wickett & Craig in Pennsylvania. The leather is slowly soaked in a special bark tanning solution and "hot-stuffed" with tallow and waxes in the final stage. This environmentally friendly tanning process transforms the cowhide into a durable, supple leather suitable for horse and saddlery as well as filson briefcases. With virtually indestructible solid brass YKK® zippers and durable cotton wrapped polyester thread, this briefcase is built for decades of faithful service.

Toughness and durability were top priorities when designing the Filson 24-Hour Tin Cloth Briefcase, but convenience and practicality were not to be neglected. The interior is fully lined with dry Tin Cloth and features a padded laptop divider that protects laptops up to 15 inches in size, as well as two storage pockets for accessory storage. The two exterior pockets include a zippered security pocket and a slotted utility pocket, each with an open storage compartment behind it - this is extremely convenient for phones, boarding passes or other items you need to access quickly. The back features a full-width storage compartment and a trolley strap that slides over rolling luggage handles to free up your hands and lighten your luggage. The removable, adjustable shoulder strap is made of flexible, two-inch wide cotton webbing that conforms to the shape of the shoulder for maximum comfort. The double-layered bottom and custom sand-cast solid brass hardware are other examples of how Filson thought of everything when designing this bag.

Filson 24 Hour Tin Briefcase - Features:

• Padded computer compartment for 15" laptops.
• Interior compartments and 2 exterior zippered pockets and storage compartments.
• Handles made of Bridle Leather that is resistant to saddles
• Fully lined, dry finish, cover fabric.
• Removable, adjustable webbing shoulder strap
• Dimensions: approx. 40,5 x 30,5 x 10 cm
• Made of water resistant Tin Cloth
• 100% cotton Tin Cloth, 400 g/m², 100% cotton Dry Finish Cover Cloth, 179 g/m², Bridle Leather & 100% Cotton Webbing

The Large backpack embodies the philosophy that Filson has been following for 125 years: the production of uncompromising products using the best materials available. Products that will withstand the demands of daily use for years to come, that will be passed on and not thrown away. As one of the first bags Filson introduced to the market more than 30 years ago, this traditional backpack remains a testament to the idea that if it's worth doing, it's worth doing right.

Rugged Twill was chosen by Filson for this backpack because of its exceptional abrasion resistance. This extremely tough twill is sourced from the UK's oldest and most traditional mills and is lightly waxed to keep the contents dry. The high-quality Italian cowhide used for the shoulder straps and reinforcements is very strong and durable enough for equestrian accessories - it has been slowly vegetable tanned over several weeks in natural, plant-based solutions that transform high-quality cowhides into sturdy, supple and shiny leather that will mold to the anatomical shape of the rucksack wearer for decades. The stainless, sturdy zipper on the main compartment of the Filson Backpack Large extends down the sides of the bag for easy access to the contents; it's reinforced with thick Italian cowhide leather and is protected by a large storm flap. The two front pockets are gusseted to increase capacity and are secured by press studs on the flaps.

Filson Rucksack Large - features/specs:

• saddle-grade bridle leather closure straps with stainless steel buckles at the flap
• YKK® brass zipper at main compartment's opening
• 2 front pockets with snap button closure at flaps, 1 open rear compartment
• water-repellent, abrasion-resistant Rugged Twill fabric
• adjustable shoulder straps made from high-quality Italian cowhide
• padded back panel
• top handle made from high-quality Italian cowhide
• measurements: approx. 38 x 47 x 15 cm
• capacity: 33 liters
• 100% cotton waxed rugged twill and Italian bridle cowhide
• made in EU

The Porter-Yoshida & Co. Heat 2Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Briefcase - specifications:

• weight: approx. 1200 g
• dimensions: approx. 410 x 300 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 3Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 3Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 3Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 3Way Briefcase - specifications:

• weight: approx. 1385 g
• dimensions: approx. 420 x 305 x 115 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 1875 g
• dimensions: approx. 280 x 540 x 180 mm
• capacity: 25 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan