Accessories Women 2211 Items

The Flight Day Pack by Beams Plus is based on a 2-way bag from the early 1970s. The Beams Plus Flight Day Pack impresses with a sturdy carrying handle, an ergonomic strap as well as a timeless design.

Beams Plus Flight Day Pack - further features:

• high-quality shoulder strap that reduces strain
• main compartment with divider for laptop or tablet
• side pockets for drinks or umbrella
• dimensions: 36 x 42.5 x 17 cm
• capacity: 31 liters
• 1000 denier Taslan made from 100% nylon

With the Fishing Cap TR Plaid, Beams Plus offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Beams Plus Fishing Cap TR Plaid - features:

• low rise 4-panel construction with yarn dyed plaid pattern
• metal eyelets at vent holes
• contrast twill visor
• adjustable cowhide strap with metal buckle and oval metal eyelet at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• crown: 80% polyester, 20% rayon
• visor: 100% cotton
• strap: 100% cowhide
• made in Japan

You're looking for a plain strapback hat that's on par with all the big players' stuff, but also offers an extra twist? Don't look further, the 6Panel Herringbone Cap is an adjustable high-quality design single-handedly produced by Beams.

Beams 6Panel Herringbone Cap - Features:

• mid rise 6-panel construction
• contrast eyelet stitching
• slightly curved visor
• adjustable leather strap with antique metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton herringbone-textured denim

Made in Japan from soft cotton fabric, the bandanas twin pack by Beams Plus is equipped with traditional patterns. Dimensions: approx. 55 x 54 cm; 100% cotton; Country of origin: Japan.

The Beams Plus Day Pack 2 Compartments is equipped with the following features:
• hidden 2-way zipper at front pocket
• attachment leather patches at upper front and bottom
• hidden 2-way zipper at main compartment's opening
• 2 side pockets with draw cord closure
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with side-release buckle
• interior padded 15 inch laptop compartment with elastic hook and loop fastener strap closure
• padded back panel
• top handle
• bottom loop
• dimensions: approx. 41 x 53 x 17.5 cm
• capacity: 32.5 liters
• exterior fabric: 1000 denier Taslan made from 100% nylon
• lining: 100% polyester

The Beams 2 Zip Waist Pack is a practical companion that knows how to prevent bulging pants pockets and safely stores all the important things you carry with you.

Beams 2 Zip Waist Pack - Features:

• adjustable belt with side-release buckle
• metal zipper at fron compartment
• sturdy metal zip closure at main compartment's opening
• interior strap mit snap hook
• Beams label sewn inside
• dimensions: approx. 14 x 33 x 2 cm
• outer material: 100% nylon
• lining: 100% polyester

Filson Tin Cloth bags are made for traveling light and fast, with all of the weather resistance and durability that’s made Filson bags legendary. Made from waxed canvas, Filson's Tin Cloth Medium Duffle Bag is a lighter-weight bag that provides heavyweight performance.

The Filson Tin Cloth Medium Duffle is made with the brand's iconic waxed canvas that's protected foresters, sportsmen, and tradesmen from harsh weather, brush, and abrasion for more than a century. Thick cotton webbing handles are stitched down the sides of the bag for maximum strength, while the carry grip is made with saddle-grade bridle leather that will mold to the shape of your hand for decades of comfortable carry. The interior of the Filson Tin Cloth Medium Duffle Bag is equipped with nylon lining for an added layer of protection.

Filson Tin Cloth Medium Duffle Bag - Features/specs:

• made with durable Tin Cloth waxed cotton
• fully nylon-lined
• heavy-gauge metal YKK® zipper
• exterior stow pockets on each end
• cotton-webbing removable shoulder strap
• cotton webbing handles with bridle leather
• capacity: 43 liters
• dimensions: approx. 51 x 33 x 30.5 cm
• weight: approx. 1,700 kg
• 100% cotton oil finish Tin Cloth, 14 oz, with details made from bridle leather & cotton webbing
• lining: 100% nylon

With the Weekender Cap, Magic Castles offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Magic Castles Weekender Cap - features:

• mid rise 6-panel construction
• "I Am Weekender" graphic stitched on front
• Magic Castles branding embroidered on the rear
• tonal eyelet stitching
• curved visor with green bottom
• adjustable strap with metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill

With the ACMH 6 Panel Cap, Magic Castles offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Magic Castles ACMH 6 Panel Cap - features:

• mid rise 6-panel construction
• ACMH graphic embroidered on front
• Magic Castles branding stitched on the rear
• tonal eyelet stitching
• curved visor
• adjustable strap with antique metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill

With the A-Ok 6 Panel Cap, Magic Castles offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Magic Castles A-Ok 6 Panel Cap - features:

• mid rise 6-panel construction
• A-Ok graphic embroidered on front
• Magic Castles branding stitched on the rear
• tonal eyelet stitching
• curved visor
• adjustable strap with antique metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill

The Magic Castles Record Tote is a shopper equipped with A-OK embroidered graphic on the front, MC logo embroidery at the bottom of the rear as well as two sturdy handles. Dimensions: approx. 38 x 36 x 12 cm; 100% cotton canvas.

The Filson 24-Hour Tin Cloth Briefcase combines time-tested, traditional materials with time-honored craftsmanship to create a bag that meets the needs of the modern business traveler. Filson has combined the capacity of the padded computer case with the sleek design of the brand's original briefcase to create a design that gets the job done, no matter where your work takes you.

Filson's legendary oil-finished Tin Cloth has proven itself for decades protecting foresters, miners and sportsmen from wetness and adverse conditions - so you can be sure your gear is well protected on all your travels. British Millerain's Duck canvas is thoroughly impregnated with Filson's oil finish wax, repelling rain, snow and mud. The Tin Cloth's tight weave boasts high abrasion and tear resistance, making it the ideal material for a lighter bag that will stand the test of time. The handles are cut, burnished and edge-dyed at the Filson factory in Seattle using vegetable-tanned leather from Wickett & Craig in Pennsylvania. The leather is slowly soaked in a special bark tanning solution and "hot-stuffed" with tallow and waxes in the final stage. This environmentally friendly tanning process transforms the cowhide into a durable, supple leather suitable for horse and saddlery as well as filson briefcases. With virtually indestructible solid brass YKK® zippers and durable cotton wrapped polyester thread, this briefcase is built for decades of faithful service.

Toughness and durability were top priorities when designing the Filson 24-Hour Tin Cloth Briefcase, but convenience and practicality were not to be neglected. The interior is fully lined with dry Tin Cloth and features a padded laptop divider that protects laptops up to 15 inches in size, as well as two storage pockets for accessory storage. The two exterior pockets include a zippered security pocket and a slotted utility pocket, each with an open storage compartment behind it - this is extremely convenient for phones, boarding passes or other items you need to access quickly. The back features a full-width storage compartment and a trolley strap that slides over rolling luggage handles to free up your hands and lighten your luggage. The removable, adjustable shoulder strap is made of flexible, two-inch wide cotton webbing that conforms to the shape of the shoulder for maximum comfort. The double-layered bottom and custom sand-cast solid brass hardware are other examples of how Filson thought of everything when designing this bag.

Filson 24 Hour Tin Briefcase - Features:

• Padded computer compartment for 15" laptops.
• Interior compartments and 2 exterior zippered pockets and storage compartments.
• Handles made of Bridle Leather that is resistant to saddles
• Fully lined, dry finish, cover fabric.
• Removable, adjustable webbing shoulder strap
• Dimensions: approx. 40,5 x 30,5 x 10 cm
• Made of water resistant Tin Cloth
• 100% cotton Tin Cloth, 400 g/m², 100% cotton Dry Finish Cover Cloth, 179 g/m², Bridle Leather & 100% Cotton Webbing

With the 6 Panel Regimental Strap Sucker Cap, Beams Plus offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Beams Plus 6 Panel Regimental Strap Sucker Cap - features:

• mid rise 6-panel construction
• flat visor
• adjustable striped textile strap with dual metal ring closure at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 74% polyester, 26% cotton seersucker
• strap: 100% cotton
• made in Japan

The Beams Plus Mil Rev Sun Hat Nylon Camo Print is a military-style bucket hat that can be reversed and is euipped with a camouflage pattern printed all over one side. Other features of the Mil Rev Sun Hat Nylon Camo Print from Beams Plus include a snap-fastening hat band that runs either on or under the surface as well as printed Beams Plus military branding on the brim. Rip-stop fabric made from 100% nylon; made in Japan.

Made from water-repellent cotton-nylon blend Cordura® rip-stop, this premium version Beams Plus Jungle Hat is equipped with a cut and sew monochrome look, metal eyelets at vent holes as well as a draw cord-adjustable hat band with metal eyelets plus toggle at the cord and self fabric daisy chain overlay. Interior features taped seams and a moisture-absorbing sweatband. 60% cotton, 40% nylon Cordura® rip-stop fabric; made in Japan.

Made from cotton rip-stop, the Beams Plus Jungle Hat is a vintage fisher hat equipped with a cut and sew monochrome look, metal eyelets at vent holes as well as a draw cord-adjustable hat band with metal eyelets plus toggle at the cord and self fabric daisy chain overlay. Interior features taped seams and a moisture-absorbing sweatband. 100% cotton rip-stop fabric; made in Japan.

The Heresy Dirk Chain features a Dirk pendant made of oxidized 925 silver as well as a 60 cm x 0.23 cm chain.

The Heresy Drencher Tote Bag is a cotton shopper equipped with the brand's own Drencher pattern printed all over, their own take on a rain camo. This Heresy bag also features a flap pocket on the inside seam, two sturdy handles as well as Sun graphic printed on front. Dimensions: approx. 46 x 43 cm; 100% cotton.

The Heresy Sungod Hat is a knitted bucket equipped with a waffle texture as well as Heresy's H branding plus Sungod graphic embroidered at the crown. 65% polyester, 35% viscose.

With the Crypt Cap, Heresy offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Heresy Crypt Cap - features:

• mid rise 6-panel construction
• Heresy branding embroidered on front
• tonal eyelet stitching
• curved visor
• adjustable strap with metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton

With the Pillbox Cap, Heresy offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Heresy Pillbox Cap - features:

• Heresy Sun graphic embroidered on front
• tonal eyelet stitching
• curved visor
• adjustable strap with metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton

You're looking for a strapback hat that's on par with all the big players' stuff, but you also want an extra twist? Don't look further, the Pique Classic Cap is an adjustable high-quality design single-handedly produced by Fred Perry.

Fred Perry Pique Classic Cap - features:

• mid rise 6-panel construction
• Fred Perry Laurel Wreath logo embroidery on left front panel
• tonal eyelet stitching
• adjustable strap with branded metal buckle at the rear
• interior includes plain taping and a moisture-absorbing twin tipped sweatband
• 100% cotton piqué

You're looking for a strapback hat that's on par with all the big players' stuff, but you also want an extra twist? Don't look further, the Pique Classic Cap is an adjustable high-quality design single-handedly produced by Fred Perry.

Fred Perry Pique Classic Cap - features:

• mid rise 6-panel construction
• Fred Perry Laurel Wreath logo embroidery on left front panel
• tonal eyelet stitching
• adjustable self-fabric strap with branded metal buckle at the rear
• interior includes plain taping and a moisture-absorbing twin tipped sweatband
• 100% cotton piqué

For ages, a headgear item like the Dickies Albertville five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Dickies Albertville Cap is equipped with the following features:

• Dickies horseshoe woven label on front panel
• tonal eyelet stitching at vent holes
• flat visor
• adjustable nylon strap with side-release buckle plus Dickies woven flag label at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 65% recycled polyester, 35% BCI cotton 66 Cloth, 278 g/m²

Made from tough, easy-care, recycled nylon, the Patagonia Wavefarer Bucket Hat is a six-panel fisher hat equipped with a cut and sew monochrome look, tonal eyelet stitching at vent holes as well as a Patagonia woven flag label. Interior features taped seams and a moisture-absorbing sweatband, and the Patagonia Wavefarer Bucket Hat rolls up into an interior pocket. bluesign™ certified 4-ply NetPlus® faille fabric made from 100% post-consumer recycled nylon (made from recycled fishing nets to help reduce ocean plastic pollution) with a PFC-free DWR (durable water repellant) finish, 166 g/m². Weight. 62 g. Fair Trade Certified™ sewn.

Made from tough, easy-care, recycled nylon, the Patagonia Wavefarer Bucket Hat is a six-panel fisher hat equipped with a cut and sew monochrome look, tonal eyelet stitching at vent holes as well as a Patagonia woven flag label. Interior features taped seams and a moisture-absorbing sweatband, and the Patagonia Wavefarer Bucket Hat rolls up into an interior pocket. bluesign™ certified 4-ply NetPlus® faille fabric made from 100% post-consumer recycled nylon (made from recycled fishing nets to help reduce ocean plastic pollution) with a PFC-free DWR (durable water repellant) finish, 166 g/m². Weight. 62 g. Fair Trade Certified™ sewn.

The Patagonia Fieldsmith Lid Pack is equipped with the following features:
• top flap with adjustable straps including side-release buckles
• drawstring closure at main compartment's opening
• front pocket with hidden zip closure
• adjustable, padded, and ergonomic shoulder straps
• interior organizer panel
• interior 15 inch laptop sleeve
• padded back panel
• top handle
• Patagonia woven label at lower left front
• dimensions: approx. 26.7 x 48.2 x 12.7 cm
• capacity: 28 liters
• weight: approx. 520 g
• exterior: 100% recycled polyester 600D weave with PU coating & PFC-free DWR finish (durable water repellent coating that does not contain perfluorinated chemicals), 210 g/m²
• lining: 100% recycled polyester 200D weave with PU coating, 102 g/m²
• webbing: 100% recycled nylon
• cord: 100% recycled polyester
• Fair Trade Certified™ sewn

The Carhartt WIP Garrison Tote is a shopper equipped with a self-fabric patch pocket at the center of the front, snap button closure at main compartment's opening, an interior zip compartment, a Carhartt woven square label on the front pocket as well as two sturdy handles. Dimensions: approx. 38 x 40 x 13 cm; capacity: 19.8 liters, Clark twill made of 100% cotton, 10.5 oz, with stone wash finish.

The Heliostat adds a new dimension to Oakley®'s groundbreaking high wrap frame technology. Rooted in the brand's heritage of proven high wrap design, the Heliostat by Oakley® offers modern design features including a slimmer fit made from O Matter™ frame material. The 3-point fit with internal Unobtainium® temple tips and integrated nose pads make the Oakley® Heliostat a classic frame with a contemporary look.

Oakley® lenses are engineered and tested under extreme conditions of mass and speed to provide uncompromising protection in a variety of demanding environments.

Oakley® Heliostat - Details:

• newly redesigned frame in high wrap design
• frame made of durable, lightweight O-Matter™ for high wearing comfort
• 3-point fit
• Unobtainium® temple tips
• Prizm Tungsten Polarized
• light transmission: 14 %
• light conditions: bright light
• lens width: 61 mm
• lens height: 39 mm
• bridge: 16 mm
• temples: 129 mm

Oakley's original Radar® offers the combination of everything the brand has learned through decades of research and collaboration with the world's best athletes. With the Radar EV's larger lens and expanded peripheral field of view at the top, Oakley's performance spectrum has reached a new milestone. The design was finished off with Prizm™ lenses - Oakley's exclusive lens technology is designed to optimize color and contrast, enhancing the visibility of details.

Oakley Radar EV Path - Features/Specifications:

• frame made of lightweight O Matter™ material with metal oval logo details
• Unobtainium® temple tips and nose pads for superior comfort and quality
• Oakley's high-performance HDO® lens technology
• hardcase included
• light transmission: 12%
• impact protection: Oakley lenses are designed and tested under extreme conditions of mass and speed to provide uncompromising protection in a variety of demanding environments.
• dimensions (lenses): 139 mm width, 58 mm height
• dimensions (frame): 139 mm front, 138 mm temples
• made in the USA

The Engineered Garments Bucket Hat is a vintage fisher hat equipped with a cut and sew monochrome look, tonal eyelet stitching at vent holes as well as interior signature details. Interior features taped seams and a moisture-absorbing sweatband. 68% cotton, 32% hemp; made in USA.

With the Tincan LX Cap, Oakley offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Oakley Tincan LX Cap - features:

• mid rise 6-panel construction
• metallic Oakley logo appliqué on front
• Oakley lettering embroidered on right rear panel
• tonal eyelet stitching
• curved visor
• adjustable nylon strap with side-release buckle plus Oakley woven flag label at the rear
• interior includes branded tapes and a moisture-absorbing sweatband
• 97% polyester, 3% spandex

You're looking for a solid strapback hat that's on par with all the big players' stuff, but also offers an extra twist? Don't look further, the Delray Cap is an adjustable high-quality design single-handedly produced by Carhartt WIP.

Carhartt WIP Delray Cap - Features:

• mid rise 6-panel construction
• Carhartt lettering embroidered on front
• tonal eyelet stitching
• curved visor
• adjustable strap with metal buckle at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill, 274 g/m² (garment washed)

The Gramicci x and wander Multi Patchwork Chalk Pouch is a climbing chalk bag made from 600D OX polyester fabric that's is lightweight as well as water-repellent. The long tape belt was designed for two ways of using: For climbing as being rolled onto chest and for town use as shoulder pouch stored small goods in it. 100% polyester.

Der Gramicci x and wander Multi Patchwork Chalk Pouch ist ein kompakte Tasche für Kletterer aus 600D OX-Polyestergewebe, das sowohl leicht als auch wasserabweisend ist. Der lange Gurt wurde für zwei Verwendungszwecke konzipiert: Zum Klettern, indem er auf die Brust gerollt wird, und für den Stadtgebrauch als Umhängetasche, in der kleine Gegenstände verstaut werden können. 100% Polyester.

The Gramicci x and wander Multi Patchwork 2Way Pack is a bag made from 600D OX polyester fabric which is lightweight plus water-repellent. Finished with a unique patchwork look, you can use the Gramicci x and wander Multi Patchwork 2Way Pack as a backpack or a tote bag if you use the strap as a handle with changing 90 degree angle from backpack form. The shoulder straps of the Gramicci x and wander Multi Patchwork 2Way Pack are adjustable, the side pockets are equipped with hook and loop fasteners, and there's lots of sytlish branding details including Gramicci x and wander jacquard straps/tape. 100% polyester.

The Gramicci x and wander Nyco Hat is a vintage bucket hat equipped with a cut and sew monochrome look, tonal eyelet stitching at vent holes, a drw cord-adjustable hatband, reflective stitching at the brim as well as a reflective Gramicci x and wander logo printed on the crown. The Gramicci x and wander Nyco Hat is made from Niyco, a military-approved blend of nylon and cotton which is renowned for its quick-drying properties. Due to the way this fabric is woven, it’s got an almost vintage feel which adds a timeless, almost worn-in feel. If you’re searching for the ultimate bucket hat, this Gramicci x and wander design might just be the one. Exterior fabric: Nyco twill made from 56% cotton, 44% nylon; lining: 100% polyester mesh.

The Carhartt WIP Garrison Tote is a shopper equipped with a self-fabric patch pocket at the center of the front, snap button closure at main compartment's opening, an interior zip compartment, a Carhartt woven square label on the front pocket as well as two sturdy handles. Dimensions: approx. 38 x 40 x 13 cm; capacity: 19.8 liters, Clark twill made of 100% cotton, 10.5 oz, with stone wash finish.

The Carhartt WIP Garrison Tote is a shopper equipped with a self-fabric patch pocket at the center of the front, snap button closure at main compartment's opening, an interior zip compartment, a Carhartt woven square label on the front pocket as well as two sturdy handles. Dimensions: approx. 38 x 40 x 13 cm; capacity: 19.8 liters, Clark twill made of 100% cotton, 10.5 oz, with stone wash finish.

The Pertex ShieldAir Mountaineering Cap is a waterproof cap specifically designed by Goldwin to keep you active in hot and humid environments. It's a minimalist design made from Pertex ShieldAir fabric that can withstand sudden changes in outdoor weather during activities such as trekking and hiking. Eliminating as many seams as possible and replacing them with adhesives gives this item a clean finish and improved waterproofing.

The Goldwin Pertex ShieldAir Mountaineering Cap is equipped with the following features:

• flexible visor
• adjustable nylon strap with front-release buckle at the rear
• interior includes tape-sealed seams and a moisture-absorbing mesh sweatband
• Pertex ShieldAir 3L made from 100% nylon with a resin finish on the surface (includes recycled yarn)

With the Nylon Cap, Goldwin offers a high-quality strapback design that's on par with any item by self-proclaimed headgear specialists. For example, all seams are protected by tapes in the interior, in addition, a moisture-absorbing headband adds great wearing comfort. Not to mention the adjustable closure, which allows to individualize the fit...

Goldwin Nylon Cap - Features:

• mid rise 6-panel construction
• tonal Goldwin logo embroidery on front
• tonal eyelet stitching
• curved visor
• adjustable nylon strap with side-release buckle plus Goldwin woven flag label at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% recycled nylon lightweight, crease-resistant fabric, made from PET bottles

For ages, a headgear item like the Goldwin Pertex Equilibrium Light five panel hat has been the smartest choice if you’re looking for a hat with visor. Made of Pertex Equilibrium, this Goldwin cap offers an excellent balance of windproofness, water repellency, and breathability, in a highly versatile design that's suitable for active scenes and outdoor fields.

The Goldwin Pertex Equilibrium Light Cap is equipped with the following features:

• reflective Goldwin logo printed on left panel
• perforated ventilation holes at the rear
• slightly curved, flexible visor
• adjustable, elastic cord with toggle at the rear
• interior includes tape-sealed seams and a moisture-absorbing sweatband
• Pertex Equilibrium made of 100% nylon with resin finish (partially made of recycled yarn]

The Edwin Teide Flash Tote Bag is a nice shopper equipped with nice graphic art by tattoo artist Teide, co-founder of London’s esteemed Red Point Tattoo, printed on front and rear, an interior zip pocket as well as two sturdy handles. Dimensions: approx. 48 x 38 x 15 cm; inner pocket: 15 x 20 cm. 100% cotton; made in Germany.

The Porter-Yoshida & Co. Heat 2Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Briefcase - specifications:

• weight: approx. 1200 g
• dimensions: approx. 410 x 300 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 590 g
• dimensions: approx. 275 x 200 x 100 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 1875 g
• dimensions: approx. 280 x 540 x 180 mm
• capacity: 25 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Tote Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Tote Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Tote Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Tote Bag - specifications:

• weight: approx. 1070 g
• dimensions: approx. 380 x 380 x 180 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Briefcase - specifications:

• weight: approx. 750 g
• dimensions: approx. 410 x 300 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 640 g
• dimensions: approx. 280 x 190 x 105 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Sling Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Sling Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Sling Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Sling Shoulder Bag - specifications:

• weight: approx. 675 g
• dimensions: approx. 150 x 340 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Boston Bag (S) - specifications:

• weight: approx. 1010 g
• dimensions: approx. 410 x 270 x 150 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 445 g
• dimensions: approx. 150 x 190 x 70 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Pouch is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Pouch is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Pouch a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Pouch - specifications:

• weight: approx. 105 g
• dimensions: approx. 130 x 80 x 35 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 3Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 3Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 3Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 3Way Briefcase - specifications:

• weight: approx. 1385 g
• dimensions: approx. 420 x 305 x 115 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Messenger Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Messenger Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Messenger Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Messenger Bag (S) - specifications:

• weight: approx. 915 g
• dimensions: approx. 305 x 255 x 120 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 825 g
• dimensions: approx. 230 x 450 x 100 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 515 g
• dimensions: approx. 290 x 115 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 415 g
• dimensions: approx. 230 x 140 x 50 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 410 g
• dimensions: approx. 230 x 130 x 75 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Kangol Braid Bucket Hat is an update of the legendary design that has been sported by famous rappers during the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. Made from braid linen-poly fibers, the iconic Kangol Braid Bucket Hat is equipped with basic features such as the unique bell-like shape, a moisture-absorbing sweatband at the interior, as well as the famous Kangol kangaroo logo embroidered at wearer's left. 60% linen, 40% polyester.

The Urban Ex collection by Chrome Industries was designed for one purpose. Keeping your stuff out of the elements. The custom knurled-welded technique makes for some of the lightest, toughest and most waterproof seams out there.

The Chrome Industries Urban Ex Rolltop 20L is equipped with the following features:

• lightweight Knurled Welded™ construction
• roll top with magnetic closure
• front pocket with waterproof YKK zip closure
• holder loops at front
• reflective Molle webbing on face and harness for maximum night visibility
• adjustable, padded, and ergonomic shoulder straps
• removable and adjustable sternum strap with custom push plate buckle
• interior padded 15 inch laptop sleeve
• quick-access storage compartment
• durable synthetic rubber bottom panel
• padded back panel
• top handle
• radio-frequency welds for lightweight, waterproof construction
• Chrome Industries label on front
• dimensions: approx. 25.5 x 53.5/61 x 13 cm
• volume: 20-25 liters
• exterior: lightweight 500D fabric with PU coating at the rear, made from 100% nylon
• lining: 150D fabric made from 100% recycled polyester
• weight: approx. 800 g

The Chrome Industries Barrage Freight Backpack is equipped with the following features:
• roll-top construction
• adjustable external 5-point cargo net system
• side pockets including asy-access U-lock holder
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 15 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 33.5 x 58.5 (rolled) resp. 77.5 (unrolled) x 25.5 cm
• volume: 34-38 liters
• weight: approx. 2,130 g
• exterior: abrasion-resistant 1050D nylon
• lining: weatherproof 500D TPE tarpaulin made from 100% nylon

The Chrome Industries Barrage Freight Backpack is equipped with the following features:
• roll-top construction with reflective details
• adjustable external 5-point cargo net system
• side pockets including asy-access U-lock holder
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 15 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 33.5 x 58.5 (rolled) resp. 77.5 (unrolled) x 25.5 cm
• volume: 34-38 liters
• weight: approx. 2,130 g
• exterior: abrasion-resistant RedX fabric made from custom 210d recycled nylon X grid laminated sail cloth
• lining: weatherproof 500D TPE tarpaulin made from 100% nylon

The Chrome Industries Barrage 22L Cargo Backpack is equipped with the following features:
• roll-top construction
• adjustable exterior cargo net at front
• side pockets
• easy-access U-lock holder at side wall
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 13 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 30 x 51-56 x 15 cm
• volume: 18-22 liters
• weight: approx. 1.36 kg
• exterior: abrasion-resistant 1050D nylon & 500D TPE tarp
• lining: weatherproof 18 oz truck tarpaulin made from 100% nylon with PU coating

The Chrome Industries Barrage 22L Cargo Backpack is equipped with the following features:
• roll-top construction with reflective details for visibility in the dark
• adjustable exterior cargo net at front
• side pockets
• easy-access U-lock holder at side wall
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 13 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 30 x 51-56 x 15 cm
• volume: 18-22 liters
• weight: approx. 1.36 kg
• exterior: abrasion-resistant 210D recycled nylon X grid laminated sail cloth & 500D TPE tarp
• lining: weatherproof 18 oz truck tarpaulin made from 100% nylon with PU coating

According to designer Yohji Yamamoto, Y-3 stands for the ultimate crossover of sport and style and a progressive mix of tradition and modernity. We can co-sign that. Once again, Y-3 presents performance wear in a new context, relying on Yohji Yamamoto's rebellious creativity. The basis is provided by classic silhouettes from the adidas archive. The result is innovative looks that invite for experimentation.

The Y-3 Running Cap is equipped with the following features:

• Y-3 branding printed on front panel
• taped vent holes
• flexible visor
• adjustable strap with hook and loop fastener at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 100% recycled polyester Gore-Tex

The Kangol Growth Bucket Hat is an update of the legendary design that has been sported by famous rappers during the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. Made from braid linen-poly fibers, the iconic Kangol Growth Bucket Hat is equipped with basic features such as the unique bell-like shape, a bungee toggle adjuster at the rear, colored metal eyelets at vent holes, a moisture-absorbing sweatband at the interior, as well as a seasonal Kangol graphic embroidered at wearer's left. 100% polyester.

The Kangol Easy Carry Fisherman Hat is an update of the legendary bucket hat. Made from twill fabric, the features of the Kangol Easy Carry Fisherman Hat include a flap pocket with hook and loop fastener attached to the crown, an adjustable chin cord as well as a press stud that can be used to fold up and fix the brim, while interior features a moisture-absorbing sweatband. 60% cotton, 40% polyester twill.

The Easy Carry 5 Panel by Kangol is a visor hat with a high utility factor and outdoor ambitions. Kangol's adjustable Easy Carry 5 Panel not only offers sun protection, but also a total of three pockets in which you can store small items plus mini snap hooks for additional attachment options. Added to this is the excellent workmanship and the comfortable interior with tapes on the seams and a moisture-absorbing band.

The Kangol Easy Carry 5 Panel is equipped with the following features:

• self-fabric pocket with hook and loop fastener plus tonal Kangol kangaroo logo appliqué on front panel
• tonal eyelet stitching at vent holes
• self-fabric flap pocket with hook and loop fasteners on side panels
• flexible visor
• contrast loops with mini snap hooks at the bottom of both side panels
• adjustable nylon strap with front-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 60% cotton, 40% polyester

The Kangol Distressed Cotton Mesh Bucket is a vintage fisher hat equipped with a cut and sew monochrome look, 360° mesh panel at the crown, drawstring adjustment at the crown with a toggle at the elastic cord a as well as Kangol's kangaroo logo embroidery. Interior features taped seams and a moisture-absorbing sweatband. 95% cotton, 5% polyester.

The Kangol Distressed Cotton Mesh Bucket is a vintage fisher hat equipped with a cut and sew monochrome look, 360° mesh panel at the crown, drawstring adjustment at the crown with a toggle at the elastic cord a as well as Kangol's kangaroo logo embroidery. Interior features taped seams and a moisture-absorbing sweatband. 95% cotton, 5% polyester.

For ages, a headgear item like the Kangol Soft Touch five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Kangol Soft Touch 5 Panel is equipped with the following features:

• Kangol logo appliqué on front panel
• tonal eyelet stitching at vent holes
• flexible visor
• adjustable nylon strap with front-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 57% nylon, 43% polyester

The Utility Cords Jungle Hat from Kangol is a fisherman's hat that has been updated for streetability. Plus, there are daisy chain straps at the crown where you can attach anything you want to take with you, whether it's rocks, scissors, paper. The chin cord end pieces are dipped color tips while the classic Kangol logo embroidery at the crown completes the design. 100% cotton.

The Utility Cords Jungle Hat from Kangol is a fisherman's hat that has been updated for streetability. Plus, there are daisy chain straps at the crown where you can attach anything you want to take with you, whether it's rocks, scissors, paper. The chin cord end pieces are dipped color tips while the classic Kangol logo embroidery at the crown completes the design. 100% cotton.

The Kangol Washed Bucket Hat is an update of the legendary design that has been sported by famous rappers during the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. Made from pre-washed twill fabric, the iconic Kangol Washed Bucket Hat is equipped with basic features such as the unique bell-like shape, a moisture-absorbing sweatband at the interior, as well as the famous Kangol kangaroo logo embroidered at wearer's left. 100% cotton, pre-washed.

Here comes the classic bucket hat from Kangol as a knitted version in a pre-washed look. The Kangol Washed Knit Bucket is equipped with the same bell-shaped design as the original, while a woven Kangol label was added at the crown. 33% cotton, 33% polyester, 21% acrylic, 13% wool knit yarn.

Here comes the classic bucket hat from Kangol as a knitted version in a pre-washed look. The Kangol Washed Knit Bucket is equipped with the same bell-shaped design as the original, while a woven Kangol label was added at the crown. 33% cotton, 33% polyester, 21% acrylic, 13% wool knit yarn.

The Kangol 504 is an update of the legendary flat cap that has been sported by famous rappers in the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. Made from synthetic wool felt-inspired fabric, the Kangol Bermuda Hawker is equipped with basic features such as the barely seen small visor as well as a moisture-absorbing sweatband at the interior. 50% acrylic, 28% modacrylic, 22% nylon; headband: 100% nylon.

The Geo Board Bin by Kangol is a four color micro geometric jacquard knit hat made with Kangol's Tropic and recycled polyester yarns. The pattern of the Kangol Geo Board Bin gives a bright and retro feel while the ventilation rows around this tapered bucket hat will keep you cool on hot summer days. The Kangol Geo Board has been finished it with signature Kangaroo embroidery at the front. 45% modacrylic, 27% polyester, 12% acrylic, 11% recycled polyester, 5% nylon; headband: 100% nylon.

The Kangol Bermuda is an update of the legendary bucket hat that has been sported by famous rappers during the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. The iconic Kangol Bermuda Bucket Hat is equipped with a terry cloth-inspired texture as well as basic features such as the unique bell-like shape, a moisture-absorbing sweatband at the interior, and the famous Kangol kangaroo logo embroidered at wearer's left. 45% modacrylic, 40% acrylic, 15% nylon; headband: 100% nylon.

The Kangol Bermuda is an update of the legendary bucket hat that has been sported by famous rappers during the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. The iconic Kangol Bermuda Bucket Hat is equipped with a terry cloth-inspired texture as well as basic features such as the unique bell-like shape, a moisture-absorbing sweatband at the interior, and the famous Kangol kangaroo logo embroidered at wearer's left. 45% modacrylic, 40% acrylic, 15% nylon; headband: 100% nylon.

For ages, a headgear item like the Pop Trading Company Gingham Five Panel Hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Pop Trading Company Gingham Five Panel Hat is equipped with the following features:

• POP logo embroidery on front panel
• metal eyelets at vent holes
• slightly ciuved visor
• adjustable nylon strap with front-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 100% cotton gingham fabric
• made in USA