Search "basic soul unit" 23916 Items

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High-end turntable with 9" evo tonearm

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4 mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/ plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. An Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces.

Supplied either with or without a premium Quintet Blue cartridge, manufactured by the cartridge experts at Ortofon, it can be ready to play within a few minutes of unboxing. Supplied counterweights are suitable for cartridges weighing between 5-14 g. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use.

In the box:
•PerspeX SB without Ortofon Quintet Blue Cartridge
•Connect it E RCA Cable
•Dust cover
•Record clamp
•Adapter for 7“ singles
•Power supply, spirit level

Features:
•Acrylic Plinth
•Sub-chassis made from Corian with magnetic suspension
•Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat
•Inverted main bearing with ceramic ball/plate
•Belt drive with AC motor with DC driven AC generator
•Electronic speed control with 33/45 rpm switching
•Pre-mounted 9" tonearm 9 cc Evolution
•Tonearm bearings with ABEC 7 ballraces

Technical Specifications:
•Speed: 33, 45 (electronic speed change)
•Principle: Belt drive
•Platter: 300 mm MDF/vinyl Sandwich
•Main bearing: Inverted stainless steel with ceramic ball/plate
•Wow & flutter: 33: +/- 0.60% 45: +/- 0.60%
•Speed variance: 33: +/- 0.10% 45: +/- 0.10%
•Signal to Noise: 73 dB
•Tonearm: 9” cc EVO, Carbon
•Effective arm length: 230 mm
•Effective tonearmmass: 8.0 g
•Overhang: 18.0 mm
•Tracking force range: 10 - 35 mN
•Included accessory: 15 volts DC / 800 mA power supply, dust cover
•Power consumption: 6 Watts max / < 0.3 Watt standby
•Dimensions: 460 x 183 x 365 mm (WxHxD)
•Weight: 11.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/04/Manual_6Perspex-SB.pdf

Go to Item

Clearaudio

Concept MM

1.750,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black/silver turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

Go to Item

Clearaudio

Concept MM

1.750,00 €*

DF-1i A Plus Schallplattenbügler (record flattener)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

Go to Item

Orb

1.699,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Go to Item

NESSIE

Vinylcleaner ProPlus+

1.599,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics x Automobili Lamborghini

SL-1200M7B

1.499,00 €*

Technics x Automobili Lamborghini

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual

Go to Item

SL-1200M7B

1.499,00 €*

Technics x Automobili Lamborghini

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

SL-1200M7B

1.499,00 €*

DF-1i A Schallplattenbügler (record flattener)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Orb

1.399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Go to Item

Transparent

Transparent Turntable

1.300,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

• Crafted from high quality materials and components
• Pre-mounted Ortofon OM5E Cartridge
• Pre-mounted Bluetooth 5.0 Module

Timeless Design
The Transparent Turntable is a reinvention of a classic vinyl record player, designed for a modern home and an ever evolving technology. The Transparent Turntable is meticulously crafted out of aluminium and tempered glass. It is a belt driven system with a built in phono stage, and a pre-mounted cartridge from Danish Ortofon.

• Cartridge: Ortofon OM5E (MM)
• Stylus: Elliptical Diamond

Modular
Just like all Transparent products the TT has a completely modular design. With the future in mind, it is made for flexibility, upgradability and repairability.

• Cartridge Mount: Standard ½ in
• Headshell Mount: Standard SME

Transparent Sound
The Transparent Turntable plays music to any sound system, but works best with a Transparent Speaker. It plays with effortless clarity and precision, and offers playback either through cable or Bluetooth.

• Wireless Module: Bluetooth 5.0
• Phono Stage: Built in (with on/off switch)

Technical Specifications:
• Nominal speeds: 33 ⅓ and 45 RPM
• Speed variance: 33: ±0.70% 45: ±0.60%
• Wow and flutter: 33: ±0.25% 45: ±0.25%
• Signal to noise: ≥ 70dB at 1kHz, 0dB A-weighted
• Frequency range: 20-25.000Hz +3 / -3
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.5-2.0 g (15-20 mN)
• Tracking force, recommended: 1.75 g (17.5 mN)
• Tracking angle: 20°
• Replacement stylus unit: Ortofon Stylus 5E
• Effective tonearm mass: 13.5g
• Effective tonearm length: 220mm / 8.7in
• Overhang: 19.5mm / 0.77in
• Max power consumption: 15W
• Dimensions (W x H x D): 410 x 125 x 320 mm / 16 x 5 x 13 in
• Weight: 6,5kg / 14lb
• Dimensions packaging (W x H x D): 580 x 240 x 460 mm / 23 x 10 x 19 in
• Weight incl. packaging: 7,0kg / 15lb
• Rated input voltage: 100~240Vac, @ 50/60Hz.
• Bluetooth version: 5.0
• Normal or True Wireless (stereo) pairing
• 3.5 mm port for digital optical and analogue signals
• µUSB port for 5V power
• RX and TX mode (switch)
• Chip: Qualcomm CSR8670C
• Codec: aptX LL / SBC / MP3 / AAC
• Low Latency: <40ms
• Gold-plated contacts for perfect signal transmission

Go to Item

NESSIE

Vinylcleaner Basic

1.299,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Elite

1.299,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ELITE

• High Performance DVS Mixer for Serato DJ Pro, developed in close collaboration with renowned international turntable artists
• 16 large, velocity sensitive RGB performance pads: Control up to 12 performance modes per deck
• DUAL 24-bit interface & 3x non-contact Innofader Pro with high-resolution technology

POWER UP YOUR PERFORMANCE POTENTIAL
Reloop ELITE is a professional DVS mixer for Serato DJ Pro, developed in close cooperation with international turntable artists. Due to the combination of a performance-oriented layout and powerful features, ELITE allows you to fully realise your DJ potential. The full version of Serato DJ Pro, including the DVS Expansion Pack, is provided plug 'n' play. Additionally, ELITE comes with two Serato control records with NoiseMap™ technology.

DUAL 10 IN/OUT USB 2.0 AUDIO INTERFACE & ERGONOMIC BROWSE SECTION
ELITE comes equipped with a powerful DUAL 10 In/Out USB 2.0 Audio Interface, which offers outstanding sound characteristics in 24-bit resolution. Two computers can be connected at the same time via both USB ports. This way a seamless transition from one DJ to another during performance becomes as easy as possible. In the battle mixer's center you find the ergonomically designed browse section, that allows efficient one-handed control and which can be switched independently from the source selection (USB A or B) via the Focus computer control.

2x OLEDs & DEDICATED LOOP CONTROL
The two OLED displays show real-time information regarding effects, BPM, beat parameters and setup menu. Each deck has a separate loop section which can be controlled intuitively, thanks to the push encoder which also disposes of a manual loop function. Via the LED bar the selected loop length is directly visible.

INDIVIDUAL PAD MODES
In combination with the RP-8000 MK2 it is possible for the first time to control the pad modes on various devices individually and simultaneously.

SMART LINK USB HUB
External devices, such as MIDI controllers, storage media or smartphones can be connected and loaded via the two smart link USB ports. When connecting RP-8000 MK2 turntables, these will automatically recognize the corresponding deck (1 or 2). All of ELITE's control elements are MIDI compatible and can be used to control any compatible software.

STURDY METAL CONSTRUCTION WITH RESISTANT FINISH IN DEEP BLACK METALLIC
Thanks to the sturdy construction of robust metal and high-quality control elements, such as the screwed metal potentiometers, ELITE is built and ready for rough daily life. The two high-retention USB ports guarantee a safe connection and offer protection against unwanted signal loss. The surface is processed with a hard-wearing finish, which is especially resistant against scratches and is finished in a timeless deep metallic black.

INCLUDING BPM SUPREME VOUCHER
With any purchased ELITE the DJ record pool adds a 90 days Premium Membership with a value of 60 $ for their huge audio and video library - containing latest releases directly received from the record labels.

FEATURES
• Professional DVS Performance Mixer for Serato DJ Pro
• Developed in close collaboration with renowned international turntable artists
• Control up to 12 performance modes per deck
• 3x mini Innofader Pro (latest generation) on-board, featuring twice the resolution and innovative non-contact technology, allowing for ultra precise cuts and smooth operation
• 2 high-contrast OLED displays showing real-time information of effects, BPM, beat divisions and setup menu
• Colour-coded Tweak FX: stand-alone effects with bipolar control
• Toggle between Filter, Crush, Flanger, White Noise and user mode via the mode button with RGB indication
• DUAL 10 In/Out USB 2.0 audio interface with superb sound quality in 24-bit
• Two independent effect units for controlling Serato DJ Pro FX
• 3 assignable effect slots: each with dedicated activation buttons
• Dedicated and flexible effect controls for each channel
• Mini-fader for FX Level/Depth control
• 2 FX activation modes: either hold or toggle on/off
• Combines a performance-oriented layout with powerful features
• 16 large, velocity sensitive RGB performance pads
• 4 mode buttons, three layers with 12 performance modes (Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Slicer Loop, Saved Flips, Platter Play, Transport, user mode and the brand new scratch bank mode) and dual layer parameter buttons per side
• Performance pad modes can be controlled independently on each deck
• Enhanced performance with RP-8000 MK2 turntables: for the first time, pad modes can be controlled individually on each device simultaneously
• Customisable fader curves and reverse function (hamster switch)
• Digital adjustment of cut in/out points in the setup menu
• Dedicated loop section with push encoder, loop length LED bar & manual loop control
• Ergonomically designed browse section for efficient one-handed use
• Convenient cue fader system with dedicated controls for volume and mix
• Easily switch between 2 computers using the Focus PC controls
• Extensive USB routing capabilities: sampler and AUX channel can be individually routed through the Serato FX units (send/return)
• 3-band isolator EQ with full kill characteristic
• Smart Link USB ports: auto RP-8000 MK2 deck recognition
• Can also be used as an active USB hub for external devices
• Mic/line input with 2-band EQ, independent echo effect and on/off talkover switch
• 2 headphone outputs via 6.3/3.5 mm stereo jack
• Booth ouput in stereo or mono
• MIDI-compatible control elements
• High retention USB ports
• Rock-solid construction in a durable metal design
• High-quality and hard-wearing deep black, metallic finish
• Kesington Lock to secure the device
• Incl. full version of Serato DJ Pro with DVS Expansion Pack, 2x Serato Control Vinyls with NoiseMap™ technology, USB cable, power cord, operating instructions and 90 days BPM Supreme membership

TECHNICAL DATA
• Frequency response: 20 Hz - 20 kHz
• Inputs: 2x phono RCA, 2x line RCA, AUX RCA, mic/line TRS, 2x Smart - Link USB ports (type A), 2x USB ports (type B)
• Outputs: Master XLR (balanced), master RCA (unbalanced), booth TRS (balanced), rec RCA (unbalanced), headphones 6.3/3.5 mm stereo jack
• EQ range at 70 Hz, 1 kHz, 13 kHz: -∞ dB (total kill)/+9 dB
• EQ range Mic at 100 Hz, 10 kHz: -12 dB/+12 dB
• Dimensions: 290 (w) x 414 (d) x 107.5 (h) mm (potentiometers: 18.5 mm)
• Weight: 6 kg
• Software requirements: Serato DJ Pro 2.1.2

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238128_Reloop_IM.pdf

Go to Item

SB-C600

1.099,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium Class Speaker System

Advanced Phase Precision Driver
To reproduce music with enhanced spatial sound expressivity requires that the wavefronts of sounds radiated from the speaker unit are all aligned regardless of the listening position. The concept of point sound source is one of the ideal approaches to achieve it.
To realise the point sound source reproduction, the coaxial configuration was adopted and then it was combined with the originally shaped Linear Phase Plug for aligning phases and the Smooth Flow Diaphragm formed with a shallow-shape diaphragm and smooth edge shape for minimum sound reflection. The result is a spherical wave with aligned wavefronts of radiated sounds.
The SB-C600’s 2-way coaxial speaker unit realises clear sound image localisation and a smooth, high-quality sound, rich of emotion, while inheriting the concepts of point sound source and linear phase that Technics pursues relentlessly.

Linear Phase Plug
The originally shaped acoustic plug is positioned on the front side of the tweeter diaphragm and provides a high-resolution sound reproduction capability and a wide sound stage.

Smooth Flow Diaphragm
If the sound wave has irregularities on its sound transmitting surface, its wavefront becomes disturbed by the shapes of the irregularities, resulting in the degradation of frequency characteristics. High frequencies that have short wavelengths tend to be more susceptible to the degradation of sound characteristics. The woofer diaphragm in the coaxial speaker unit has a shallow shape and smooth edge to reduce sound reflection. The result is minimal disturbance of the wavefronts of sound waves radiated from the diaphragm to realise excellent frequency response and phase characteristics as well as wide directivity.
This configuration achieves a wide sound stage and smooth and rich mid- to high-frequency range.

Smooth Flow Port
A bass reflex port with an ordinary shape produces a large air current vortex that induces annoying high-frequency noise. Technics employed the airflow control method utilised for airplane wings and designed the cross-sectional shape of the port using flow analysis. The optimally designed port shape does not cause airflow disturbance at the opening and ensures high-quality bass reproduction with minimum noise and superb response.

Stationary Construction
It thoroughly removes undesirable or unwanted sounds and reproduces only the intended sounds with a high signal-to-noise ratio. The “Balanced Driver Mount Architecture” used in the grand class SB-G90M2 has been optimized for this model by making full use of CAE (Computer Aided Engineering). In addition, the speaker mount baffle that holds the speaker units in place has been newly designed to strengthen the rigidity of the entire cabinet. The combination of these factors maximizes the advantages of the gravity center mount structure. The rigidity and shape of each part that makes up the coaxial speaker unit has been carefully studied to eliminate unnecessary vibration and noise.

Balanced Driver Mounting Architecture
To realise a calm and low-distortion sound, the SB-C600 employs a speaker mount baffle created by optimising the low-resonance, high-rigidity design concept of the SB-G90M2 using CAE.
The originally shaped speaker mount baffle keeps the concentration of stress in check. The speaker mount baffle secures enough vent holes to ensure smooth flow of sounds radiated from the back sides of the speaker units and improve the response while maintaining low resonance and high rigidity. In addition, this structure reduces the vibrations of the entire enclosure and minimises the effects on other equipment.

High Quality Parts
The network circuit uses high-quality parts, such as polypropylene film capacitors, OFC wires and more. The speaker terminals are made of brass.

All Aluminium Diaphragms
The woofer and tweeter diaphragm are made of alumite-treated aluminium material for a unified tonal quality, and provides balanced sound like a full-range unit.

Highly Analysed and Optimised Components
To achieve accurate sound image localisation, structural parts such as spacers and wire grommets were analysed extensively for the elimination of undesirable vibrations and noise.

Matte Black Finish
The front baffle of the SB-C600’s enclosure is coated with a matte paint mixed with a powder for a beautiful matte finish.

Specs:
• Advanced Phase Precision Driver with Linear Phase Plug
• Smooth Flow Diaphragm
• Silent Construction with Balanced Driver Mounting Architecture
• Smooth Flow Port
• Highly Analysed and Optimised Components
• High Quality Parts for High-purity Sound

Technical Data:
• Type: 2-way 2-speaker Bass Reflex (Coaxial 2-way Woofer/built-in tweeters)
• Speaker Units: Woofer / Tweeter: 15 cm (6") Cone type x 1 / 2.5 cm (1") Dome type x 1
• Impedance: 4Ω
• Input Power (IEC): 60W (Rated), 120 W (Max)
• Recommended Amp Power: 40- 120 W (Speaker tested by IEC60268-5 Short Term Max Test)
• Sound Pressure Level: 83 dB / 2.83 V (m) / 80 dB / W(m)
• Frequency Range: 40Hz - 100kHz (-10dB)
• Crossover Frequencies: 2kHz
• Dimensions (W x H x D): 173 mm × 293 mm × 283 mm (Include net 8mm and terminal 15mm)
• Weight: Approx. 6.3 kg
• Accessories: Speaker Cable x2*¹, Owner's Manual x1
*1 Length of the speaker cable may not be sufficient on your placement. Please prepare suitable cable based on your installation requirements.

Go to Item

SL-1500C

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium Class Direct Drive Turntable System SL-1500C

The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge
Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

Simple Design with Functional Beauty
The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.

Specs:
• The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
• Complete Turntable with a Built-in Phono Equalizer and Cartridge
• Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
• Simple Design with Functional Beauty

Technical Data:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 and 78 r/min
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 % W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 2.0 kg (Including rubber sheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32'　(at the outer groove of 30 cm (12") record)
- Within 0° 32'　(at the inner groove of 30 cm (12") record)
• Applicable Cartridge Weight Range:
(without auxiliary weight):
- 5.6 - 12.0 g
- 14.3 - 20.7 g (including head shell)
(with auxiliary weight):
- 10.0 - 16.4 g
- 18.7 - 25.1 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1
- LINE (Pin Jack) x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2W (Standby)
• Dimensions (W x H x D): 453 x 169 x 372 mm
• Weight: Approx. 9.9 kg
• Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Cartridge(ortofon 2M Red), PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

Go to Item

SA-C600

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium Class Network CD Receiver

Introducing the Network CD Receiver SA-C600—your ultimate gateway to a universe of music experiences, all wrapped up in a single, sleek device. Say hello to seamless integration of your favourite music sources, from cherished vinyl and classic CDs to the latest radio hits and limitless streaming options, while experiencing the pinnacle of audio excellence.

Elevate your listening journey to new heights with the SA-C600, meticulously crafted by the masters of sound engineering at Technics. Immerse yourself in a luxurious sonic landscape where every note, every beat, resonates with unparalleled clarity and richness.

Full Digital Amplifier
The SA-C600 boasts a fully digital amplifier and transmission system, ensuring minimal outside noise interference for accurate signal transmission. Enjoy high-quality digital audio with the smooth texture of analog recordings.

Designed for Sophisticated Music Listening Experience
To keep things visually cohesive, the SA-C600 borrows style elements from Technics turntables, including colour, texture, and dimensions, giving the system a sleek and unified look. Plus, the aluminium top panel houses a convenient CD player with a manually operated lid, adding both practicality and a touch of elegance to the setup.

Twin Power Supply Circuit System
The SA-C600 boosts amplifier performance with a separate power supply exclusively for its circuits, ensuring stable power to two independent transformers. Additionally, the optimized wiring minimises noise for exceptional sound quality.

Built-in Phono Equaliser compatible with MM Cartridge
The SA-C600's built-in phono equaliser is specifically designed for MM cartridges, giving you better performance. It runs on its own power supply circuit, separate from the control circuit, which helps reduce background noise for clearer sound. In addition, its shielded construction keeps out external noise, so your music gets amplified without losing any quality.

Space Tune™
The Space Tune feature—an innovation that customizes your sound experience to fit any space, ensures incredible music no matter where you're listening. Whether you're using the user-friendly Technics Audio Centre app, or selecting from one of the four presets directly on the main unit—Free, Wall, Corner, or Shelf—you can tailor the sound to perfectly suit your acoustic surroundings.* Available for iOS devices only

Compatible with a variety of music sources
The SA-C600 supports a variety of music sources including CD, radio, phono input, optical digital input (including TVs), coaxial digital input, USB input, and more.

Enjoy high-quality sound wirelessly
The SA-C600 can playback high-resolution music wirelessly. It supports not only Bluetooth® and AirPlay 2, but also Spotify Connect®, TIDAL, Amazon Music, and more, and comes with Chromecast built-in™.

Compatible with MQA
The SA-C600 supports MQA and can playback MQA-CD and MQA files downloaded from music streaming services with outstanding sound quality.

Specs:
• JENO Engine (Jitter Elimination and Noise-shaping Optimisation)
• Twin Power Supply Circuit System
• Clean Powered Clock Generator
• Built-in Phono Equaliser compatible with MM Cartridge
• Space Tune™
• Supports a Wide Range of Music Content

Technical Data:
• Output Power: 60 W + 60 W (1 kHz, T.H.D. 1.0%, 4Ω, 20 kHz LPF)
• Load Impedance: 4Ω - 16Ω
• Frequency Response:
- PHONO (MM): 20 Hz - 20 kHz (RIAA DEVIATION ±1dB, 8Ω)
- LINE: 20 Hz - 80 kHz (-3dB, 8Ω)
- DIGITAL: 20 Hz - 90 kHz (-3dB, 8Ω)

• Input Sensitivity / Input Impedance
- PHONO (MM): 2.5 mV / 47 kΩ
- LINE: 200 mV / 22 kΩ
• Analogue Input Terminal:
- LINE x 1
- PHONO (MM) x1

• Digital Input Terminal:
- Optical digital x 1
- Coaxial digital x 1
- USB-A x 1
- USB-B x 1 (PC)

• Analogue Output Terminal: Sub Woofer x 1
• Headphone Output: Yes, Stereo Φ3.5 mm
• Disc Compatibility: Audio CD, CD-R/CD-RW (CD-DA, Discs recorded and finalized on recording devices)

• USB-A
iPod/iPhone/iPad: No
Support Codec:
- WAV: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- FLAC: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- DSD: Yes (2.8 MHz, 5.6 MHz, 11.2 MHz)
- AIFF: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- ALAC: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- AAC: Yes (32, 44.1, 48, 88.2, 96 kHz/16-320 kbps)
- MP3: Yes (32, 44.1, 48 kHz / 16-320 kbps)

• PC(USB-B)
USB Audio Class Specification:
- USB 2.0 high-speed
- USB Audio Class 2.0, Asynchronous mode
Support Codec:
- LPCM Yes (32, 44.1, 48, 88.2, 96, 176.4, 192 kHz / 16, 24 bit)
- DSD Yes (2.8 MHz, 5.6 MHz)
DSD control mode: ASIO Native mode, DoP mode

• MQA Decorder: Yes

• LAN(DMR):
- WAV: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- FLAC: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- DSD: Yes (2.8 MHz, 5.6 MHz, 11.2 MHz)
- AIFF: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- ALAC: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- AAC: Yes (32, 44.1, 48, 88.2, 96 kHz/16-320 kbps)
- MP3: Yes (32, 44.1, 48 kHz / 16-320 kbps)

• Ethernet Interface: LAN (100 Base-TX / 10 Base-T)

• Wi-Fi:
- IEEE 802.11 a/b/g/n/ac
- 2.4 GHz / 5 GHz Band

• Chromecast built-in: Yes
• AirPlay 2: Yes
• Bluetooth® (Support codec): Yes (AAC, SBC)
• Tuner: DAB / DAB+ / FM
• Power Supply: AC 220 V - 240 V, 50/60 Hz
• Power Consumption: 46 W
• Dimensions (W x H x D): 340 mm x 94 mm x 341 mm
• Weight: Approx. 4.8 kg
• Accessories: AC Cord, DAB Indoor Antena, Remote Control, Batteries for Remote Control, Owner's Manual

Go to Item

SC-C70MK2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium Class All-in-One Music Music System

The new generation of C70 All-in-one music system with CD, radio, USB playback, Bluetooth and Chromecast built-in, all in an elegant & timeless design.

Newly Developed Speaker Units & Acoustic Lens
The 8-cm woofer unit offers significantly better basic characteristics as a result of various improvements made, such as the reduced weight of the voice coil, enhanced airflow and increased rigidity of the diaphragm. The woofer provides superb response and sound clarity to reproduce mid- and high-frequency sound comfortable to the ear. The high-res-ready 2-cm dome tweeter unit features a lighter silk diaphragm to provide beautiful lingering sound. What’s more, the acoustic lens is optimised for the new tweeter shape and enhances the expansiveness of reproduced sound.

3 JENO Engines
In order to faithfully reproduce the information of rich sounds with the 2.1ch configuration, three “JENO Engine” full digital amplifier units have been equipped. In addition to utilising the excellent processing capacity of the three units and faithfully driving the left and right channels and subwoofer, “Space Tune”, which optimises the sound quality depending on the installation status, has been realised.

Space Tune™
The SC-C70MK2 features Space Tune™ Auto to achieve optimally balanced sound easily with the press of a button. This function measures test tones played through a mic that is built into the SC-C70MK2 to analyse the distance to walls and the effect of reflections. It then automatically optimises the sound field. In addition, the Space Tune™ function includes 3 presets (Free, Near the Wall, and Near the Corner) for easy setting, and uses a Technics Audio Center app to precisely adjust the sound quality to the listening position.

iOS device calibration is available for more precise adjustment
Measure room acoustic conditions by using microphone integrated in iOS devices.
Tune DSP parameters to optimise acoustic performance.

Multi-room
With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room*. In addition, if you use Technics Audio Center app and have another app compatible Technics devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ f SC-C70MK2 compatible streaming music. * The Google Home App is required.

Complete Compatibility
In addition to CDs and radio, this model is newly compatible with Chromecast built-in, and supports a wide range of music streaming services. Furthermore, it is also compatible with Spotify Connect, Amazon Music, Deezer and Internet radio. It is also compatible AirPlay 2, Bluetooth Wi-Fi, network playback, USB memory playback and analogue/optical input to allow you to enjoy various sound sources with one unit. The UI of our iOS/Android smartphone app, “Technics Audio Center App” has also been redesigned, making it easier to use than ever before.

Favourite Function
Up to 9 presets can be set on the main unit, such as favourite internet radio stations, a DEEZER playlist, and USB songs. This makes it possible to listen to your favourite music without even starting up an app.

Specs:
• Newly Developed Speaker Units & Acoustic Lens
• JENO Engine (Jitter Elimination and Noiseshaping Optimization)
• Load Adaptive Phase Calibration (w/o Calibration function)
• Space Tune™
• Twin Power Supply Circuit System
• CD High-Res Re-master

Technical Data:
• Accurate Digital Technology:
- JENO Engine (Jitter Elimination and Noise-shaping Optimization)
- Load Adaptive Phase Calibration (w/o Calibration function)
- Space Tune™
- Twin Power Supply Circuit System
- Re-master

• Noiseless Signal Technology:
- Twin Power Supply Circuit System
- Optimally Activated Circuit System
- CD High-Res Re-master

• Emotive Acoustic Technology:
- Acoustic Lens and Louver
- Dual bass reflex port

• Output Power:
- Front speaker: 30 W + 30 W (1 kHz, T.H.D. 1.0 %, 6Ω, 20 kHz LPF)
- Subwoofer : 40 W (70 Hz, T.H.D. 1.0 %, 4Ω, 20 kHz LPF)

• Speaker Unit: Woofer : 8 cm Cone Type x2 / Tweeter: 2 cm Dome Type x 2 / Subwoofer: 12 cm Cone Type
• Analogue Input Terminal: AUX IN x1 (φ3.5mm)
• Digital Input Terminal: Optical Digital x1, USB-A
• Headphone Output: Yes (Ø3.5 mm)
• Disc Compatibility: Audio CD, CD-R/CD-RW (CD-DA, Discs recorded and finalized on recording devices)

• USB-A:
iPod/iPhone/iPad: No
Support Codec:
- WAV
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- FLAC
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- DSD
Yes (2.8 MHz, 5.6 MHz, 11.2MHz)
Yes (2.8 MHz, 5.6 MHz, 11.2MHz)
- AIFF
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
- ALAC
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24 bit)
- AAC
Yes (32, 44.1, 48, 88.2, 96 kHz / 16-320 kbps)
Yes (32, 44.1, 48, 88.2, 96 kHz / 16-320 kbps)
- MP3
Yes (32, 44.1, 48 kHz / 16-320 kbps)
Yes (32, 44.1, 48 kHz / 16-320 kbps)

• DLNA: Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
• Ethernet Interface: LAN (100 Base-TX/10 Base-T)
• Wi-Fi:
- IEEE 802.11 a/b/g/n/ac
- 2.4 GHz / 5 GHz Band
• Chromecast built-in: Yes
• Works with Google Assistant: Yes
• AirPlay 2: Yes
• Bluetooth® (Support codec): Yes (AAC, SBC)
• TIDAL / Spotify: Yes* / Yes*
• Tuner: DAB/DAB+/FM
• Power Supply: AC220-240 V, 50 Hz / 60 Hz
• Power Consumption: 45 W
• Dimensions (W x H x D): 450 x 143 x 280 mm
• Weight: Approx. 8.0kg
• Accessories: Remote Control, AC Cord, DAB Indoor Antena 、Batteries for Remote Control

Go to Item

SC-C70MK2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

SA-C600

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

SA-C600

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

RMX-95

949,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

STANDARD REDEFINED
The professional RMX-95 4+1 channel club mixer blurs the lines between analogue workflow and digital technology. The RMX-95 is a cutting-edge, extraordinarily versatile creative tool thanks to its dual-USB 2.0 interface, redesigned effects section, optional MIDI mapping of all controls, and smooth integration of the djay PRO AI DJ software. The club mixer has a familiar and user-friendly interface, making it suitable for both professional and hobby DJs.

SURGICAL SOUND MANIPULATION IN EVERY DETAIL
Will you go for "Classic" or "Kill"? The RMX-95's 3-band EQ can be adjusted to allow maximum sound control for unique results.
Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher and Transformer are just some of the many studio-quality effects included in the brand-new Beat FX unit. The dedicated FX frequency control (LPF/HPF) lets you apply the effects to a specific frequency range for a more unique sound.
And that's not all: Each channel also features a bipolar filter unit (LPF and HPF) with real-time resonance adjustment. This allows for even more complex sound productions.
Two digital displays show parameter changes in real time for precise control that goes beyond hearing.

CONNECTIONS GALORE
The RMX-95 also excels in terms of connectivity: Four CD, two line, and two phono inputs are available on the four input channels. The separate microphone channel has two microphone connections (1 x jack, 1 x jack/XLR combination jack) and an additional AUX input. The master output offers RCA or balanced XLR cable connections. The booth output has two jack connections for stereo operation. However, it can also be used in mono mode. A recording device can be connected to the Rec output via RCA jacks to record DJ sets – regardless of the master output level. Last but not least, the DJ mixer has two jacks for headphones.

MAXIMUM FLEXIBILITY: DUAL-USB AUDIO INTERFACE
Superior 24-bit sound quality is provided by the ten inputs and outputs of the high-quality dual-USB 2.0 interface. The two USB ports allow smooth transitions between DJs and maximum flexibility when using different setups in a single club night. In addition, the active USB hub enables the connection of additional USB devices.

FULLY DIGITAL ARCHITECTURE
The RMX-95's digital architecture transforms the DJ mixer into an individually mappable MIDI controller. As part of this, the setup menu provides a wealth of customisable options, such as EQ frequency range, Neural Mix™ EQ mode, audio interface routing, and zone routing for the booth output.

DVS-ENABLED FOR DJAY PRO AI & NEURAL MIX™
The RMX-95 works with Algoriddim djay PRO AI via plug and play. The DJ app's ground-breaking Neural Mix function lets you isolate beats, melodies, and vocals in the mix in real time. The RMX-95 supports djay PRO AI's advanced DVS integration with Mac, PC, iPhone and iPad. The DJ software is also compatible with streaming services like Tidal¹, Soundcloud¹, Beatport Link¹ or Beatsource Link¹.

CRISP CUTS AND SMOOTH BLENDING
The adjustable curve of all faders provides DJs with the creative flexibility they want while mixing. Turntablists and scratch wizzards can also upgrade the crossfader with the contactless RMX innoFADER.

INDESTRUCTIBLE DESIGN
The club mixer's sleek black metal surface is not only eye-catching but also highly durable. The solid metal housing and hard-wearing metal shafts in all of the built-in potentiometers and switches provide a long service life, even with heavy club use.

FEATURES:
• Professional 4+1-channel DJ club mixer
• DUAL 10 In/Out USB 2.0 audio interface with superb, 24-bit sound quality
• New Beat FX unit with multiple effects in studio quality: Echo, Reverb, Flanger, Phaser, Vinyl Brake, Loop Roll, Noise, Pitch Shift, Delay, Ping Pong Delay, Tape Delay, Bit Crusher,Transformer
• FX frequency control (LPF/HPF) for manipulating effects in selected frequency band
• Sound filters: Bi-polar filter unit with LPF and HPF
• Realtime resonance control for channel filters
• Active USB hub to connect USB accessories
• 3-band EQ with adjustable behaviour (classic/kill)
• Two digital displays showing real-time information of parameter changes
• Digital mixer architecture with extensive adjustment options
• Extensive setup menu, including:
• EQ frequency range (low, high)
• Neural Mix™ EQ mode
• Audio interface routing
• Booth output zone routing (matrix)
• CUE solo option
• RMX innoFADER compatible
• Adjustable linefader and crossfader curves
• MIDI-compatible control elements
• 2x High-retention USB 2.0 port, especially durable
• 2x Mic inputs with dedicated MIC ON button
• 2x Headphone outputs via 6.3/3.5 mm stereo jack with split cue
• 2x Mic inputs with dedicated MIC ON button
• Booth output in stereo or mono
• High-quality and hard-wearing, pure black metallic finish
• Sturdy construction in a metal housing with bolted metal shafts
• Kensington lock to secure the device
• Incl. manual, power cord, and USB cable

Go to Item

Heat Rucksack

919,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 1875 g
• dimensions: approx. 280 x 540 x 180 mm
• capacity: 25 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

AIAIAI

UNIT-4 Wireless+

799,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AIAIAI introduces world’s first professional wireless studio monitors

UNIT- 4 frees the music creation process with battery powered portability and ultra-low latency wireless audio.
With UNIT-4, what was previously confined to the traditional studio is now liberated in the hands of the creator, enabling them to break free from boundaries. Whether at home, on the road, or with friends, UNIT-4 allows for freedom of movement and increased opportunity for collaboration.

AIAIAI brings innovation in audio technology and acoustic design that packs professional studio monitor performance into a compact size of only 2.5kg. UNIT-4’s advanced wireless technology allows for wireless, uncompressed audio with only 16ms of latency. Three different modes of connection means complete versatility in one speaker with Wireless+ ultra-low latency, Bluetooth and cabled options. Designed from the inside out without using glue, UNIT-4 allows for total disassembly and component replacement, and is made from 100% recycled plastic.

The introduction of UNIT-4 is AIAIAI’s latest step in expanding its family of products using the W+ Link technology, which began with the introduction of the TMA-2 Wireless+ headphones in December of 2021. The W+ Link has been specifically developed for wireless audio with ultra-low latency in a stable and robust connection, designed for enhanced freedom for music making.

The UNIT-4 Wireless+ studio monitors allows creators to finally break free from the cable and expand their creative freedom. Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables.
Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

The key features uniquely designed for enhanced freedom and set UNIT-4 apart from other speakers are the following:

Complete wireless freedom
• Battery powered with 20H+ of playback time
• W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
• Complete wireless freedom - both audio and power cables

Reference monitor performance
• 2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
• Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
• Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
• Precise soundstage and point-source accuracy provided by the minimal front panel design, incorporating a directivity controlling tweeter waveguide
• Stage monitor design enables you to place the speaker upright or angled horizontally, to optimise your sound field in changing workspaces
• Shape UNIT-4’s sound to your environment or preference using the AIAIAI app customisable 5-band EQ

Portable, compact and rugged
• Size and weight of only 3 litres / 2.5kg
• Rear bass vent designed to be a comfortable carrying handle when on the move
• Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything
• W+ Link - use the X02 transmitter for low latency wireless music creation
• Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
• Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design
• Main components produced from 100% recycled plastics, from post-consumer sources
• Designed for disassembly in a glue-free design - take the whole speaker apart using twoscrewdrivers
• Replace worn out components including battery and drive units
• Future-proofed for new technologies with upgradeable wireless electronics

WHAT’S IN THE BOX?
• UNIT-4 Wireless+ Studio Monitor x2
• X02 W+ Link Transmitter
• Power supply x2

TECHNICAL SPECIFICATIONS:
UNIT-4 AUDIO
• Response: +/-2dB 50Hz-20kHz
• Low cut-off: 40Hz
• Peak SPL: 104dB
• Enclosure: Bass reflex
• Woofer: 4 inch high excursion
• Tweeter: 1 inch silk dome
• Crossover: 3kHz
• Amplifier: Class D 2x 80W peak
• DSP: Loudness adaptive bass EQ
• EQ adjustment: 5-band (AIAIAI app)

UNIT-4 AUDIO CONNECTIONS
• Low latency audio: AIAIAI W+ Link
• Bluetooth version: 5.2
• Analog inputs: 3.5mm aux / 6.3mm balanced

UNIT-4 POWER
• Battery playback time: 20 hours
• Charging time: 2 hours
• Battery capacity: 77Wh
• Power supply: 120-240VAC - 15VDC

X02 W+ LINK TRANSMITTER
• Latency: 16 ms
• Audio quality: Uncompressed
• Operating range: 12 m
• W+ Link connections: 2 devices

Go to Item

Pertex Shield Rain Jacket

749,95 €*

Leather Harrington Jacket

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

This and wander Rain Jacket has been constructed from Pertex Shield material. Pertex Shield is a three-layer, durable water-repellent fabric laminated with a seven micron non-porous membrane polyurethane film on 10 denier nylon. With water pressure resistance 20,000 mm (JIS L 1092 B method) and moisture permeability 20,000 g/m² per 24h (B-1 method), you can say, Pertex Shield fabric can compete with the most function outdoor cloths the word has ever seen. At the and wander Pertex Shield Rain Jacket, armpit ventilation makes it easy to regulate body temperature while the stretch fabric adapts to all body movements, and reflective stitching enhances visibility in the dark.

and wander Pertex Shield Rain Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• waterproof 2-way front zipper with custom pull and interior storm flap
• 2 XL front pockets with waterproof zip closure plus side-entry compartments
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• waterproof side zippers
• adjustable straps with hook and loop fasteners at cuffs
• extended rear panel, curved bottom hemlines
• reflective tapes at front pockets
• reflective and wander logo printed at left front pocket
• relaxed fit
• fabric: 100% nylon Pertex Shield with backside polyurethane laminate and nylon tricot

Go to Item

thisisneverthat

712,95 €*

Available Sizes: L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The thisisneverthat Leather Harrington Jacket is contemporary rendition of the legendary Harrington jacket that was celebrated for being worn by Ryan O'Neal's character Rodney Harrington in the mid-60s. Basically, only the shape of the thisisneverthat Leather Harrington Jacket is reminiscent of the Harrington; otherwise, this design is based on the purist version of a classic leather jacket in an elite premium version.

The thisisneverthat Leather Harrington Jacket is equipped with the following features:

• stand-up collar with dual button closure
• semi-hidden YKK #5 metal front zipper with custom pull
• chest pocket with YKK #3 metal zipper with TNT pull at wearer's left
• 2 welt pockets at lower front
• stretch bottom band
• snap button-adjustable cuffs
• interior chest pocket at wearer’s left
• tonal thisisneverthat branding embossed at top rear
• regular fit
• shell: 100% goatskin
• lining: 50% rayon, 50% polyester
• made in Korea

Go to Item

Heat 3Way Briefcase

699,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat 3Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 3Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 3Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 3Way Briefcase - specifications:

• weight: approx. 1385 g
• dimensions: approx. 420 x 305 x 115 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Kleeny

MK2

655,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Kleeny MK2 Premium Record Cleaning machine

Made and engineered in Germany from experienced designers and technicans. This are the features:
• Beautifully designed, very compact housing that takes up little space
• Housing sides made of aluminum with leather-look covering
• Low operating noise thanks to noise insulation
• Silicone feet provide a secure grip and minimize structure-borne noise
• Adapter for dry vacuuming singles and 10 inch LPs included
• Robust traditional switches
• Ergonomic puck (record weight) with magnetic fixation - no screwing or clamping!
• Label protection by rubber lip
• Powerful, reliable platter motor rotates clockwise and counterclockwise
• Plate mandrel made of polished stainless steel
• Suction turbine with 250W power - does the drying in 2 revolutions!
• Platter mat made of soft, antistatic rubber
• Internal dirty water tank with drain spout, easy to empty. No hose or clamp required.
• Dry blow function protects against residual moisture and musty odor.
• Suction arm holder made of CNC milled aluminum
• Easy swinging in and out of the suction arm without screws
• Classic switch design

The robust switches could also be found in a classic sports car. The gear motor is switched on with the left switch. During washing, the direction of rotation should be changed several times by flipping the switch. The right-hand switch switches on the powerful suction turbine. It only needs 2 revolutions of the turntable and the record is dry. A high-quality record brush is part of the delivery programme.The unit can be emptied easily with the help of an outlet spout.

Secure protection for the label
The beautifully shaped puck has a sealing lip on its underside that protects the label from moisture penetration all around. Powerful magnets pull the puck onto the record. So nothing needs to be clamped or screwed. It couldn't be simpler.

Washing with premium brush attached by one click
The DRAABE Premium brush is included in the delivery. With Kleeny MK2 you don't need to hold the brush in your hand. It is simply clicked onto the wash arm. It adapts to the slight unevenness of the surface because it is suspended so that it can move. When the washing process is finished, you simply remove the brush and switch on the suction. It couldn't be simpler!

Scope of delivery - gets you ready to wash!
• Unit including, clamp, suction arm and platter mat
• Kleeny Service station with adapters for Singles and 10 Inch LPs
• Housing in noble leather look colour: bordeaux
• 200 ml Nessie cleaning lotion - ready to use, in suirt bottle for cleaning up to 40 records
• Premium record brush with click technology
• Connection cable with Euro, Swiss or UK Plug
• Manual in English language

Technical data:
• Dimensions without turntable: 280 mm x 145 mm x 230 mm
• Weight : 2,7 kg
• Power consumption "Suction" : 250 W
• Power consumption "Washing" : 12 W
• Power consumption "Stand by" : 0 W
• Diameter of turntable : 24.5 cm
• Dimensions with attached turntable : 375 mm x 245 mm x 230 mm
• Electr. connection IEC cable with plug (Euro, Swiss, UK depending of your country)
• Electr. voltage : 230V / 50Hz.
• Extraction noise : 62 db(A)

Go to Item

Heat 2Way Briefcase

629,95 €*

Paraboot x Engineered Garments

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat 2Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Briefcase - specifications:

• weight: approx. 1200 g
• dimensions: approx. 410 x 300 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

EG Chambord Bride

599,95 €*

Paraboot x Engineered Garments

Available Sizes: EU 41, 43, 44, 45, 46

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Basically, the EG Chambord Bride by Paraboot and Engineered Garments is a classic men's shoe with a derby vamp, if it weren't for the leather strap running across the instep with a polished 1-pin buckle. This detail and the slightly raised U-shaped seam at the front of the upper turn this Paraboot shoe into a stylish hybrid design, which, like some styles from this brand, is fitted with a Norwegian-stitched Goodyear rubber sole that has been made suitable for outdoor use thanks to its rough tread.

Norwegian stitching was developed mainly for mountain and work boots, and the principle can be described as follows: The shaft is sewn to the sole by a welt. Two seams are visible: the so-called Norwegian seam, which connects the frame with the upper and the first stitch, while a seam created by small stitches connects the frame with the sole. However, it's also possible to do it without a frame - in this particular case, both threads are sewn directly on the leather of the underside of the upper. The advantages of the Norwegian seam are the rock-solid and flexible assembly technique, which makes the shoe waterproof and resoleable. From a technical standpoint, the advantages of Norwegian stitching are comparable to those of Goodyear stitching.

Paraboot insoles, heels and soles are still manufactured and vulcanized with the same composition as in the past. As a result, the rubber achieves the best material and mechanical properties in terms of comfort, adaptability and wear resistance. Paraboot's rubber compounds come from France and are vulcanized on their own presses in the company's workshop in Saint Jean de Moirans.

Paraboot x Engineered Garments EG Chambord Bride - features:

• upper: semi-gloss leather, pressed with the help of a smooth hot plate
• leather lining
• Norwegian stitching
• homemade vulcanized rubber sole
• handmade in France
• re-sole option: Goodyear and the Norwegian style offer the option of re-soling
• made in France

Go to Item

EG Chambord Bride

599,95 €*

Available Sizes: EU 41, 42, 43, 44, 46

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Marshall

Woburn III

549,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Woburn III is guaranteed to fill any space with immersive, home-shaking Marshall signature sound. Built-in Dynamic Loudness adjusts the tonal balance of the sound, ensuring your music sounds brilliant at every volume. Woburn III is ready for the future of Bluetooth technology and has been built ready to deliver next-generation Bluetooth features the moment they are available.

WOBURN III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising of high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA + HDMI)
With so many ways to connect to Woburn III, getting the right sound for listening to music or watching TV has never been so effortless. Connect to your speaker directly from your device using Bluetooth, RCA or 3.5 mm input. Woburn III also has an HDMI input, which allows you to connect Woburn III to your TV for a uniquely Marshall viewing experience.

PRODUCT DETAILS
POWER AMPLIFIERS:
• ONE 90 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15W CLASS D AMPLIFIERS FOR THE MIDS
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT
• HDMI INPUT

TOP PANEL CONTROLS:
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 400 X 317 X 203 MM / 15.75 X 12.48 X 7.99 IN

Go to Item

Heat 2Way Briefcase

529,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat 2Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Briefcase - specifications:

• weight: approx. 845 g
• dimensions: approx. 385 x 270 x 60-110 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

C/PE Twill Field Jacket

529,95 €*

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

and wander C/PE Twill Field Jacket - features:
• curved turn-down collar
• 2-way front zipper with custom pulls
• 4 symmetric front pockets with flaps and snap button closure
• zip pocket on left sleeve
• snap button cuffs
• and wander lettering embroidered on lower left front pocket
• relaxed fit
• durable and water-repellent, high-density C/PE Twill made from 68% cotton, 32% polyester

Go to Item

Down Jacket

Available Sizes: S, M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Gramicci x and wander Down Jacket is the ultimate street fashion statement for the current season as it's equipped with a water-repellent finish to keep you warm, dry and comfortable during cold and wet winter days. The Gramicci x and wander Down Jacket features crimped reflector pockets on both sides of the chest to keep important items safe and in reach. This Gramicci x and wander design is also equipped with partial reflective stitching as well as a reflective Gramicci x and wander logo printed on lower left front for better visibility in the dark.

Gramicci x and wander Down Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• front zipper with custom pull and interior storm flap
• 2 chest pockets with reflective tape plus zip closure including Gramicci x and wander flags at the pulls
• 2 pockets with Gramicci x and wander tape at lower front
• elastic binding at bottom hem and cuffs
• reflective Gramicci x and wander logo printed on lower left front
• regular fit
• shell: 100% nylon with cotton-like hand feel
• lining: 100% nylon
• insulation: 80% down, 20% feathers (700 fill power)

Go to Item

Down Jacket

Available Sizes: GIRLS XS, GIRLS S, GIRLS M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Down Jacket

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Gramicci x and wander Down Jacket is the ultimate street fashion statement for the current season as it's equipped with a water-repellent finish to keep you warm, dry and comfortable during cold and wet winter days. The Gramicci x and wander Down Jacket features crimped reflector pockets on both sides of the chest to keep important items safe and in reach. This Gramicci x and wander design is also equipped with partial reflective stitching as well as a reflective Gramicci x and wander logo printed on lower left front for better visibility in the dark.

Gramicci x and wander Down Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• front zipper with custom pull and interior storm flap
• 2 chest pockets with reflective tape plus zip closure including Gramicci x and wander flags at the pulls
• 2 pockets with Gramicci x and wander tape at lower front
• elastic binding at bottom hem and cuffs
• reflective Gramicci x and wander logo printed on lower left front
• regular fit
• shell: 100% nylon with cotton-like hand feel plus camouflage pattern printed all over
• lining: 100% nylon
• insulation: 80% down, 20% feathers (700 fill power)

Go to Item

Heat Tote Bag

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Tote Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Tote Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Tote Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Tote Bag - specifications:

• weight: approx. 1070 g
• dimensions: approx. 380 x 380 x 180 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Heat 2Way Boston Bag (S)

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Boston Bag (S) - specifications:

• weight: approx. 1010 g
• dimensions: approx. 410 x 270 x 150 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Heat Messenger Bag (S)

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Messenger Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Messenger Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Messenger Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Messenger Bag (S) - specifications:

• weight: approx. 915 g
• dimensions: approx. 305 x 255 x 120 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

FrizmWORKS

Smock Puffer Down Parka

514,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Established in 2010 by founder An Jong Hyun as an answer to quality heritage workwear with more modern and contemporary fits, Korean brand FrizmWORKS delivers basic styles with a slight twist on the traditional in an outstanding quality. Frizmworks isn’t about trends, its designs are simple and timeless, from head to toe.

The FrizmWORKS Smock Puffer Down Parka is equipped with the following features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• 2-way front zipper with custom pulls and snap button closure at storm flap
• 2 cargo pockets with button closure at lower chest
• 2 side-entry slit pockets at lower front
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• snap button-adjustable stretch cuffs
• interior chest pocket with snap button closure at wearer's left
• regular fit
• shell: 100% nylon
• lining: 100% polyester
• insulation: 80% down, 20% feathers (700 fill power)

Go to Item

Heat Rucksack

499,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 825 g
• dimensions: approx. 230 x 450 x 100 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Headliner

499,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Introducing the Headliner R4, a 4-channel analog rotary mixer designed to elevate your DJ experience. Continuing the tradition of precision, warmth, and affordability, the R4 is packed with enhanced features and top-notch components, including genuine ALPS potentiometers, ensuring an unparalleled mixing experience.

Crafted with four Line inputs, three Phono inputs, and one Mic input on four stereo channels. Each channel boasts essential features like gain control with peak LED, a 3-band isolator EQ, headphone cue selector, generous channel volume knob, and a filter activation switch, granting DJs precise control over their sound.

At the heart of the R4 lies the Master channel, equipped with an analog filter, headphone monitoring, and a comprehensive output control section.

Seamlessly toggle between High Pass / Low Pass Filter modes with Frequency and Resonance controls to shape your signature sound.

Empowering DJs with absolute control, the headphone Cue control section offers headphone volume control, headphones mix control (Cue/Master), and a split monitor switch for smooth transitions between outputs.

Featuring independent Master and Booth outputs, both equipped with volume controls and balanced XLR and unbalanced RCA connectors, the R4 ensures seamless connectivity across various sound systems. Dual LED level meters for the Master output facilitate precise monitoring and adjustment of audio levels. Additionally, the mixer boasts a dedicated Record output with unbalanced RCA jacks, and an additional microphone input with level control located on the front panel.

Sporting genuine ALPS potentiometers, a robust metal enclosure, and stained wood side panels, the R4 exudes a classic aesthetic that complements any DJ setup. Its modular internal construction and an external power supply connected via a locking Mini XLR guarantee superior audio performance.

The Headliner R4 stands as a testament to precision and warmth in the DJ realm. Whether spinning house, techno, or the timeless funk/soul/disco beats, this versatile mixer elevates your setup, ensuring your mixes stand out with exceptional quality and control.

Highlights:
• 4 Channel analog rotary DJ mixer with built-in Filter.
• Analog High Pass / Low Pass filter with frequency and resonance controls to shape your signature sound.
• Four stereo channels featuring gain control with peak LED, 3-band isolator EQs, headphone cue selector, generous channel volume knob, and a filter activation switch, granting you precise control over your sound
• Four line inputs, three phono inputs, and two mic inputs connecting a wide variety of devices including turntables, media players, and microphones.
• Independent Master and Booth outputs equipped with volume controls, balanced XLR and unbalanced RCA connectors, ensures seamless connectivity across various sound systems.

Features:
• Three stereo channels with selectable Line and Phono RCA inputs and one channel with selectable stereo Line and mono Microphone.
• Each channel features Gain control with Peak LED, 3-Band Isolator EQ, Headphones Cue selector with LED, channel volume control and filter activation switch with LED.
• Master channel features analog filter, headphone monitoring and output control section.
• Analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls.
• Genuine ALPS potentiometers.
• Headphone Cue control section features headphones volume control, headphones mix control (Cue/Master), and split monitor switch.
• High current headphone amplifier with dual 1/4” and 1/8” jacks.
• Independent Master and Booth outputs with volume controls, balanced XLR outputs and unbalanced RCA outputs.
• Additional Record output with unbalanced RCA jacks.
• Dual LED level meters for the Master output.
• Microphone input with level control on front panel.
• Sturdy metal enclosure with stained wood side panels for a classic look
• Modular internal construction for superior audio performance.
• External split rail power supply connected via locking Mini XLR connector.
• Push-button power switch on rear panel.
• Measurements: 12.6” x 12.2” x 4.2” (320 x 310 x 106 mm)
• Weight: 7.7lbs (3.5Kg)

Specifications:
Microphone Inputs
• Nominal Input Level: -50dBu
• Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
• THD + N: < 0.1%
• Input Impedance: 1.2 kOhm

Line Inputs
• Nominal Input Level: -10dBV (-7.8dBu)
• Gain Range: -12dB to +12dB
• Frequency Response: 20Hz – 20kHz (+0/- 0.5dB)
• THD + N: < 0.05%
• Input Impedance: 10 kOhm

Phono Inputs
• Nominal Input Level: -40dBu (@1kHz)
• Gain Range: -12dB to +12dB
• Active RIAA equalization
• THD + N: < 0.05%
• Input Impedance: 47 kOhm
• Input capacitance: 100pF
• Single stage Phono Preamp
• Ceramic capacitors

Main Outputs
• Nominal Output Levels, balanced: +4dBu
• Maximum Output Level, balanced: +20dBu
• Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
• Maximum Output Level, unbalanced: +12dBu
• Frequency Response: 20Hz-20kHz (+0/-1.5dB)
• Residual noise: <-86dBu (Line to Master)(A-Weighted)
• Dynamic Range: > 100dB (A-Weighted)
• Crosstalk: < -65dB
• THD + N: < 0.05%

Headphone Output
• Maximum Output Level: 70mA/channel into 150Ω
• Minimum Load Impedance: 32 Ohms/channel

Power Supply
• Type: External with locking mini-XLR connector
• Input Voltage: 100-240v ~ 50/60Hz
• Output Voltage: +/-15V; 500mA

Go to Item

Turn 3 MK2 (Ortofon 2M Red)

499,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium HiFi-turntable with digital USB-Audio Interface.

• Authentic HiFi turntable with digital USB-Audio Interface
• Pre-installed Ortofon 2M Red cartridge
• Low-vibration DC motor

Over 25 years experience
With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.

Quiet DC drive
The heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.

Electronic speed control for 33, 45 & 78 rpm
The TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.

Revised tonearm construction
The redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience.

Anti-skating wheel
The anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.

Headshell connection
The headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.

USB recording function
The integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.

Semi-automatic stop
With the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.

Shock-absorbing feet
Decoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal.

Precision-manufactured die-cast aluminium turntable
The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.

Solid base with piano finish
The sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image.

Immediate listening pleasure with hi-tech Ortofon cartridge
The TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.

Gold-plated connections
The gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.

High-end pre-amplifier
Equipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.

A class of it's own
The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

SPECIFICATIONS
FEATURES:
• Authentic HiFi turntable with precision belt drive
• Supplied with pre-assembled Ortofon 2M Red cartridge
• Optimised tonearm design for optimal tracking accuracy with flexible SME mounting
• Integrated high-quality preamplifier, can be switched on/off (phono/line output)
• USB recording function: recording and digitalisation of vinyl via simple USB connection for PC/Mac
• Semi-automatic stop function (can be activated optionally)
• Manual tonearm lift for analogue playback pleasure
• Low-vibration DC motor
• Integrated motor control with large speed selector switch (33/45/78 RPM)
• External DC power supply for trouble-free operation (100-230 V / 12 V / 500 mA)
• Precision-machined die-cast aluminium platter for resonance optimisation
• Infinitely adjustable anti-skating system with rotary wheel for optimum tracking accuracy
• Gold-plated, anti-corrosion connectors (all cables removable)
• Special turntable feet for effective decoupling
• High-gloss piano-finish cabinet
• On/Off switch on the back of the unit
• Incl. Ortofon 2M Red cartridge pre-mounted on headshell, counterweight, dust cover incl. hinges, felt mat, aluminium turntable, 7" aluminium adapter, RCA & USB cable and international power supply (UK/EU/US)

TECHNICAL DATA
TURN 3 MK2:
• Type of turntable: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45 & 78
• Wow and Flutter: 0.2% WRMS
• Analogue Output: Phono / Line, switchable
• Connections: RCA Audio output (gold-plated), USB type B
• Phono Output Level: 4.0 mV (with Ortofon 2M Red)
• Line Output Level: 224 mV (with Ortofon 2M Red)
• Tone Arm type: Straight
• Effective Arm Length: 223.6 mm
• Effective tonearm mass: 21.4 g
• Overhang: 18.6 mm
• Tracking force Range: 18 mN
• Platter diameter: 300 mm
• Anti-Skating adjustment: Yes
• Type of cartridge: MM (Ortofon 2M Red)
• Power consumption: 6W
• S/N: >60 dB or higher
• USB Audio Output with 48 kHz / 16-Bit
• USB Funktion: USB rec. function
• Supported Operating System: Windows & Mac
• Dimensions: 450 x 352 x 138.7 mm (incl. Dust cover)
• Weight: 6.5 kg

ORTOFON 2M RED:
• Output voltage at 1000 Hz, 5cm/sec.: 5,5 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 μMm
• Compliance, dynamic, lateral: 20 μMm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μMm
• Tracking force range: 1,6-2,0g (16-20 mN)
• Tracking force, recommended: 1,8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1,3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g

Manual: https://www.reloop-hifi.com/media/productattach/t/u/turn3mk2_im.pdf

Go to Item

Heat Briefcase

489,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Briefcase - specifications:

• weight: approx. 750 g
• dimensions: approx. 410 x 300 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Heat Waist Bag

474,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 515 g
• dimensions: approx. 290 x 115 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Marshall

Woburn III

469,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

2M Bronze Premounted

459,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• Cartridge weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2m Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

Go to Item

Heat Sling Shoulder Bag

454,95 €*

UNIT-4 Wireless+ Single Unit

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Sling Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Sling Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Sling Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Sling Shoulder Bag - specifications:

• weight: approx. 675 g
• dimensions: approx. 150 x 340 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

AIAIAI

450,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AIAIAI introduces world’s first professional wireless studio monitor

UNIT- 4 frees the music creation process with battery powered portability and ultra-low latency wireless audio.
With UNIT-4, what was previously confined to the traditional studio is now liberated in the hands of the creator, enabling them to break free from boundaries. Whether at home, on the road, or with friends, UNIT-4 allows for freedom of movement and increased opportunity for collaboration.

AIAIAI brings innovation in audio technology and acoustic design that packs professional studio monitor performance into a compact size of only 2.5kg. UNIT-4’s advanced wireless technology allows for wireless, uncompressed audio with only 16ms of latency. Three different modes of connection means complete versatility in one speaker with Wireless+ ultra-low latency, Bluetooth and cabled options. Designed from the inside out without using glue, UNIT-4 allows for total disassembly and component replacement, and is made from 100% recycled plastic.

The introduction of UNIT-4 is AIAIAI’s latest step in expanding its family of products using the W+ Link technology, which began with the introduction of the TMA-2 Wireless+ headphones in December of 2021. The W+ Link has been specifically developed for wireless audio with ultra-low latency in a stable and robust connection, designed for enhanced freedom for music making.

The UNIT-4 Wireless+ studio monitors allows creators to finally break free from the cable and expand their creative freedom. Experience unparalleled flexibility and truly liberating mobility in your creative process as a music producer. These studio monitors allow you to create and mix music with accurate sound representation and powerful performance wherever you are. Connect wirelessly to your devices and enjoy crystal clear audio without the hassle of cables.
Take control of your creativity and elevate your music to the next level with these wireless portable studio monitors.

The key features uniquely designed for enhanced freedom and set UNIT-4 apart from other speakers are the following:

Complete wireless freedom
• Battery powered with 20H+ of playback time
• W+ Link ultra low latency wireless audio for music creation - only 16ms of latency, uncompressed audio and robust connection
• Complete wireless freedom - both audio and power cables

Reference monitor performance
• 2 way active monitor featuring a 4 inch high-excursion woofer and 1 inch silk-dome tweeter
• Precision tonal accuracy over a flat +/-2dB frequency response from 50Hz to 20kHz
• Bass vent and boosting EQ tuned to provide a clean bass extension down to 40Hz
• Precise soundstage and point-source accuracy provided by the minimal front panel design, incorporating a directivity controlling tweeter waveguide
• Stage monitor design enables you to place the speaker upright or angled horizontally, to optimise your sound field in changing workspaces
• Shape UNIT-4’s sound to your environment or preference using the AIAIAI app customisable 5-band EQ

Portable, compact and rugged
• Size and weight of only 3 litres / 2.5kg
• Rear bass vent designed to be a comfortable carrying handle when on the move
• Removable steel grille provides sturdy protection for the woofer and tweeter

Connect to everything
• W+ Link - use the X02 transmitter for low latency wireless music creation
• Bluetooth 5.2 - listen to music from your Bluetooth enabled devices
• Cable - connect directly via 3.5mm mini-jack and 6.3mm balanced TRS inputs

Responsible design
• Main components produced from 100% recycled plastics, from post-consumer sources
• Designed for disassembly in a glue-free design - take the whole speaker apart using twoscrewdrivers
• Replace worn out components including battery and drive units
• Future-proofed for new technologies with upgradeable wireless electronics

WHAT’S IN THE BOX?
• UNIT-4 Wireless+ Studio Monitor

TECHNICAL SPECIFICATIONS:
UNIT-4 AUDIO
• Response: +/-2dB 50Hz-20kHz
• Low cut-off: 40Hz
• Peak SPL: 104dB
• Enclosure: Bass reflex
• Woofer: 4 inch high excursion
• Tweeter: 1 inch silk dome
• Crossover: 3kHz
• Amplifier: Class D 2x 80W peak
• DSP: Loudness adaptive bass EQ
• EQ adjustment: 5-band (AIAIAI app)

UNIT-4 AUDIO CONNECTIONS
• Low latency audio: AIAIAI W+ Link
• Bluetooth version: 5.2
• Analog inputs: 3.5mm aux / 6.3mm balanced

UNIT-4 POWER
• Battery playback time: 20 hours
• Charging time: 2 hours
• Battery capacity: 77Wh
• Power supply: 120-240VAC - 15VDC

Go to Item

Mixtour Pro

449,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We are excited to introduce the Reloop Mixtour Pro: A Superior 4-Deck All-In-One DJ Controller for Algoriddim djay Pro and developed in close collaboration with legendary DJ & producer, Laidback Luke.

THE FUTURE OF DJING
The Reloop Mixtour Pro exceeds expectations in the tiniest of spaces and provides a professional yet portable solution for the club and festival scene. The ultra-compact DJ controller was developed in close collaboration with legendary DJ & producer, Laidback Luke and is specifically designed to use seamlessly with Algoriddim’s award-winning djay Pro software.

MIXING WITH UP TO FOUR DECKS
Despite its small size, the Mixtour Pro is capable of supporting four-deck mixing with its powerful and intuitive controls. Thanks to the illuminated transport section with dedicated coloured LEDs, users are always informed of whether decks 1 and 2 or decks 3 and 4 are currently active. The aluminium browse encoder and designated load buttons allow for efficient library navigation and instant loading of tracks.

PROFESSIONAL DESIGN AND FX CONTROL
The Mixtour Pro’s two channel strips with their trusted design are fitted with all the important controls for a modern DJ setup. Each channel features an electroplated bi-polar sound filter (LPF/HPF) with a dedicated LED indicator, in addition to gain and three-band EQ. The convenient FX paddles allow the user to trigger effects in bursts via FX Hold mode or to apply them indefinitely via FX On mode. A large, electroplated dry/wet knob controls the intensity of the effect, while the two dedicated parameter buttons offer complete control over the effect parameters. The lower performance area is fitted with 45mm Ultra Glide crossfader and line faders, for the smoothest operation in the mix.

MADE FOR DJAY & NEURAL MIX™
The Reloop Mixtour Pro unlocks Algoriddim’s djay Pro software² and incorporates their revolutionary Neural Mix™ technology into the workflow with dedicated controls. This allows DJs to isolate and manipulate individual drums, instruments, and vocals from any tracks in real time, expanding creative mixing capabilities to a whole new level. This feature is toggled easily and intuitively with the press of a button and controlled via the EQ controls of the two channel strips.

CROSSFADER FUSION™
The Mixtour Pro is also the first DJ controller to support Algoriddim djay Pro’s revolutionary Crossfader Fusion™ feature. DJs are now able to select from a range of creative transition styles that are automatically applied when mixing from one song to another, delivering a perfect mix every single time with the simple slide of the crossfader.

FLEXIBLE PERFORMANCE PAD SECTION
Eight performance pads with RGB lighting provide users with more creative options with a wide range of modes including Hot Cue, Bounce Loop, Pitch Cue, Instant FX, Auto Loop, Sampler, Skip and Neural Mix™. Furthermore, all eight pads can be assigned to control one channel in single pad mode, or four pads can be assigned to a channel each via split pad mode.

FULL CONTROL: THE TRANSPORT SECTION
The Mixtour Pro's sophisticated transport section enables a smooth and efficient workflow. It features four rubberized buttons for each channel to control Play / Pause, Cue, and Sync respectively, while the signature “Laidback Loop” button independently offers instant looping (In/Out/Exit) with a single control. This transport section also offers secondary layer functions to control Auto Loop, Key Match, Pitch Bend, and Key Shift. The transport buttons also illuminate in 2 different colours representing decks 1 and 2 or decks 3 and 4, respectively, keeping the DJ clearly informed when performing.

USB-C DESIGN FOR MULTI-PLATFORM & DEVICE SUPPORT
The Reloop Mixtour Pro provides impressive compatibility options when pairing it with a device and platform. A smartphone, tablet or computer can all be conveniently bus-powered thanks to the modern USB-C architecture. The unit also houses a second USB-C PD port, capable of up to 85W to efficiently daisy-chain a power supply, allowing the device and controller to be powered simultaneously. Algoriddim's djay Pro is available for iOS, iPadOS, macOS, Windows, and Android for even more cross-platform versatility.

STREAM IT!
In addition to performing with locally stored music, the Reloop Mixtour Pro together with Algoriddim djay offers access to millions of tracks on demand via major streaming services¹ such as Tidal, SoundCloud Go+, Beatport Streaming, and Beatsource Streaming. These different sources can all be mixed together and even combined in the same playlists within djay Pro.

POWERFUL AUDIO QUALITY
As the name suggests, the Reloop Mixtour Pro also delivers in regards to professional audio. The integrated 4x Out USB interface with high-quality D/A converters from Cirrus Logic enables first-class 24-bit sound with low latency. Direct connection is provided via gold-plated RCA outputs and a 3.5mm headphone jack.

PORTABLE DESIGN WITH DURABLE BUILD
The top panel of the Mixtour Pro is composed of brushed aluminium with a high-gloss acrylic plate inlay, while large non-slip feet keep the unit firmly in place when in use. The Premium Modular Bag XT is available as an optional accessory for safe transportation with the additional benefit of providing a solid base for the controller.

FEATURES:
• High-quality, ultra-portable, all-in-one four-deck DJ controller with audio interface
• Professional solution for clubs and festivals developed in close collaboration with DJ & producer Laidback Luke
• Designed for the award-winning Algoriddim djay Pro software
• Integrated 4x Out USB sound card with 24-bit D/A converters from Cirrus Logic ensuring premium sound quality and low latency
• USB-C design (bus-powered) with optional power delivery support (85W)
• 4-deck control: dedicated LED indicator for active decks 3 and 4
• Supports revolutionary Crossfader Fusion™ feature for automated transitions delivering a perfect mix
• Neural Mix™ pad & EQ mode for real-time isolation of drums, instruments, and vocals of any song
• Electroplated bi-polar sound filters (LPF/HPF) with LED indicator
• 8 performance pads with RGB lighting
• Split pad mode to assign 4 performance pads to each deck
• Single pad mode to assign all 8 pads to a single deck
• 8 performance modes individually selectable per deck: Hot Cue, Bounce Loop, Pitch Cue, Instant FX, Auto Loop, Sampler, Skip, Neural Mix™
• Plug-and-Play: unlocks Algoriddim djay Pro on all available platforms²
• FX section for selecting and controlling effects for each deck
• 2 parameter buttons for setting the effect parameter
• 2 large electroplated toggle switches (FX paddles) with Hold & On position for burst triggering or constant effect activation
• Effect status easily visible via FX-On LEDs
• Large electroplated Dry/Wet controller for controlling the effect level
• Rubber-coated transport section with four control buttons per deck (Play/Pause, Cue, Sync, Manual Loop)
• Laidback Loop mode: instant looping with just one button (In/Out/Exit)
• Intuitive deck lighting: the transport section illuminates in a different colour according to the active decks
• Shift/mode control for 2nd-layer functions such as Auto Loop, Key Match, Pitch Bend, and Key Shift
• Millions of tracks are available on demand within Algoriddim djay Pro via the Tidal¹, SoundCloud Go+¹, Beatport Streaming¹ and Beatsource Streaming¹ streaming services
• Dedicated controls for main output level, headphone volume, and cue mix
• LED chain input signal for level indication
• Aluminium browse encoder and load buttons for quick and easy track navigation and loading
• Gain and 3-band EQ per channel
• Headphone cue buttons per channel
• 45mm Ultra Glide line faders and crossfader
• Gold-plated RCA outputs and 3.5mm headphone jack
• Brushed aluminium top panel with high-gloss acrylic plate inlay
• Flat design with high-quality components and large, non-slip feet
• Multi-platform support compatible with smartphones, tablets, or laptops
• MIDI-compatible
• Optional Premium Modular Bag XT for safe transportation and a solid base to raise the Reloop Mixtour Pro to club setup height
• Incl. USB-C to USB-C cable, RCA cable and instruction manual

¹ Internet connection and a Tidal Premium or HiFi or SoundCloud Go+ subscription required. All three subscriptions include access to Beatport Streaming and Beatsource Streaming.
² The app's functionality may vary depending on the platform used. Only Pro functions that can be operated with the controller are activated without a subscription.

SPECIFICATIONS
• Dimensions: 129 x 310 x 55 mm
• Weight: 960 g

Go to Item

429,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 590 g
• dimensions: approx. 275 x 200 x 100 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

429,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 640 g
• dimensions: approx. 280 x 190 x 105 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Pioneer DJ

DJM-250MK2

419,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Mix instinctively with pro-grade features
The DJM-250MK2 has inherited some of the professional features of the popular DJM-900NXS2, such as the Magvel crossfader and Sound Color FX filter. Straightforward controls, a clear layout, and dedicated 3-band isolators let you scratch and mix instinctively.

The dithering technology on this mixer results in warm, high-quality audio from both analogue and digital sources. Plus its built-in sound card lets you connect the mixer to your PC/Mac and use rekordbox to perform with CDJs. Or hook up the DJM-250MK2 to turntables and use rekordbox in combination with our control vinyl to scratch and mix with digital files stored on your computer.

KEY FEATURES

Clear Layout & Magvel faders
The clear layout of the DJM-250MK2’s lower half gives you freedom to perform complicated scratch techniques. Our robust Magvel Faders ensure smooth control over long-term use. 2 metal shafts support the fader knobs, while the contact-free magnetic system is designed to endure millions of movements.

Smooth Mixing
Precise, fluid mixes are a breeze using the mixer’s channel faders, and the 3-band isolators give precision across the highs, mids and lows. You can use them to totally eliminate each frequency range when you turn the knob all the way to the left.

Flagship Filter FX
Each channel comes with its own dedicated Sound Colour FX filter, a feature inherited from the DJM-900NXS2 mixer. Simply turn the knob on each channel to apply the filter, Twist the parameter knob for texture, playing with resonance and tension.

Built in USB Sound Card
Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer’s hard drive.

Performance features
Unlock rekordbox performance features by simply connecting the unit to your PC/Mac. And, if you subscribe to the Creative plan, use Cloud Library Sync for seamless library management across multiple devices, and easily make custom versions of tracks in Edit mode.

DVS control
Make full use of rekordbox's low-latency DVS control for intuitive, smooth scratching.

High-quality sound
Whether you’re playing from digital or analogue sound sources, a warm, high-quality sound is created by the 64-bit digital signal processor using dithering technology.

Two headphone outputs
The DJM-250MK2 lets you plug both an ¼-inch stereo jack and 3.5-mm mini jack. Pick your size or attach 2 headphones when playing back-to-back.

Independent MIC section
Use a microphone and the AUX input at the same time.

Flexible connectivity
The XLR terminal and RCAs deliver premium sound quality on all connections. And the signal GND terminal easily attaches ground wires from analogue turntables.

TRAKTOR DVS control
This mixer supports DVS control of Native Instruments’ TRAKTOR PRO 3 DJ software. Plug your PC/Mac into this unit and use the TRAKTOR SCRATCH control media (control vinyl or CDs) to intuitively control and scratch with digital audio files stored on your computer.
Find out more about the Pioneer DJ Certified program.

Firmware Update Manager
You’ll be automatically notified when firmware updates become available. You can download the Firmware Update Manager.

SPECIFICATIONS

Main Features:
DVS Control:
• rekordbox

Accessories:
• DJM-250MK2
• Power cord
• AC adaptor
• USB cable
• Operating Instructions (Quick Start Guide)
• Warranty

Specifications:
• Width: 230 mm
• Height: 108 mm
• Depth: 320 mm
• Sampling Rate: 48 kHz
• A/D Converter: 24 bit
• D/A Converter: 24 bit
• Power Supply: AC adaptor (DC 12 V)
• S/N Ratio Line: 94 dB
• Frequency Range: 20 - 20000 Hz
• Distortion: < 0.005 % (LINE)

Channels:
• EQ/ISO: 3 band
• EQ/ISO Range: -∞ ~ +6 dB

Performance Control
• Channels: 2
• Sound Colour FX: Filter

Terminals:
Inputs:
• 3 LINE (RCA)
• 2 PHONO (RCA)
• 1 MIC (1/4 inch TS Jack)
Outputs:
• 1 MASTER (XLR)
• 1 MASTER (RCA)
• 2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)
USB:
• 1 USB B port

Go to Item

2M Bronze Verso MM-Tonabnehmer

419,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze features:

The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body is manufactured from Hopelex, a material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Fine Line
Stylus tip radius - r/R 8/40 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Bronze
Cartridge weight - 7.2 g
Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Go to Item

Flux + UDG Creator Hardcase (HHV Bundle)

419,00 €*

En Vivo - 100 Anos De Azucar

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Reloop - Flux + UDG Creator Hardcase (HHV Bundle)
The Bundle contains 1x Reloop - Flux and 1x UDG Creator Hardcase.

RELOOP FLUX - 6X6 IN/OUT USB-C DVS INTERFACE FOR SERATO DJ PRO

We are excited to introduce the Reloop Flux: A next-generation 6x6 In/out USB-C DVS Interface for Serato DJ Pro. It can transform any conventional mixer into a professional digital vinyl system.

BACK TO THE MUSIC
The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

MAXIMUM FLEXIBILITY
Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato DJ Pro´s internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

FULL CONTROL
The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

HUB INSIDE
The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

STUDIO QUALITY – ANYTIME, ANYWHERE
The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it’s a superior DVS interface which could also be used as an audio interface in the studio.

ALWAYS POWERED
The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

ROBUST AND ROADWORTHY
The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

PLUG & PLAY FOR SERATO DJ Pro
The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

FEATURES:
• 3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96kHz with high-quality D/A converters for superior audio processing
• Also functions as a stand-alone studio interface for recording and playback audio
• 3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• 3x line outputs, including AUX-Out, assignable to the Sampler
• Easy, accessible direct thru buttons for analogue deck playback
• All terminals are visible from the top of the unit for easy installation in dark surroundings
• Bus-powered cable connection for power and audio
• Optional USB-C DC in port for external power supply
• Power delivery support for USB-C devices (max 60W)
• Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
• Power LEDs on the top panel for connection status (Hub, PD, DC)
• 2-port USB-A hub for connecting further accessories
• Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
• Highly robust, extended edge design to protect connection terminals
• Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
• Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

TECHNICAL DATA:
Power:
• USB bus powered: Yes
• Recommended power: 2 A or higher / minimum power: 400 mA
• Maximum USB-PD throughput: 60 W
• Maximum USB Hub power output: 2 x 0.8 A = 8 W
• Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
• Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
• S/N Ratio (output reference level 1 kHz, +4 dB):
• Deck In (LINE signal input: 0 dBV): More than 83 dB
• Deck In (PHONO signal input: -32 dBV): More than 73 dB
• THD + N:
• LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
• PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)

Maximum Gain:
• Deck In (LINE): +4 dB ± 2 dB
• Deck In (PHONO): +36 dB ± 2 dB
• Maximum Input (1 kHz, THD=1%):
• Deck In (LINE): More than +7 dBV
• Deck In (PHONO): More than -25 dBV
• Maximum Output (1 kHz, THD=1%):
• Deck Output: More than +11 dBV

USB:
• USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
• USB 2.0 high-speed (480 Mbit/s)
• Class-compliant on macOS
• USB Power Delivery Protocol 3.0

General:
• Dimensions (WxDxH): 160 x 120 x 34 mm
• Weight: 0.85 kg

Accessories:
• User Manual
• 1x USB type C/C cable
• 1x USB type C/A cable
• 2x RCA cables

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/5/245389_Reloop_IM.pdf

UDG - Creator Reloop Flux Hardcase

A Digital DJ/ Producer looking for a professional, durable case solution for your Reloop Flux? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Reloop Flux, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

Weight 0,20 kg / 0.44 lbs
Outer Dimensions (W x H x D) 21.0 x 18.5 x 6.2 cm | 8.3 x 7.3 x 2.4 inch
Inner Dimensions (W x H x D) 16.0 x 13.0 x 5.2 cm | 6.3 x 5.1 x 2.0 inch
Material Durashock molded EVA foam
Protection Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam
Extra's Easy grip zipper pulls
Fits Reloop Flux

Go to Item

Celia Cruz

LP | 2024 | EU | Original (Loud And Live)

418,99 €*

Release: 2024 / EU – Original

Genre: Organic Grooves

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

Danner Light (Made in USA)

Danner x Patta

416,45 €* 489,95 € -15%

Available Sizes: EU 43½, 46, 47

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For the latest drop, Danner and Patta have teamed up to give the Danner Light Boots a contemporary makeover without touching the tried and tested basic details. Built in the golden era of backpacking, the original Danner Light was constructed to be rugged, water-resistant, and stable on any terrain. The new Danner Light holds true to those same principles and is made in Danner's Portland, Oregon, factory. Updated with a full-grain, Sienna Cache leather, the brand added Dri-Lex® lining for added breathability and a Vibram® Kletterlift outsole for lightweight functionality. Danner's classic stitchdown construction provides stability underfoot and a timeless design that looks as good as the trails it follows.

Danner x Patta Danner Light - features:

• extremely durable suede & 1000 Denier nylon upper (to ensure the quality of its leathers, Danner puts their leather through six different tests to make sure it's the strongest and most durable form of leather) with padded full-grain leather collar
• bold reflective Patta branding printed at side walls
• lining: Gore-Tex® (waterproof and breathable)
• Vibram® Kletterlift outsole (specifically designed for comfort and durability; the heel provides superb shock absorption and the rubber compound guarantees great traction and stability on both wet and dry surfaces)
• Danner's handcrafted stitchdown construction offers increased stability underfoot, plus lots of the Danner stitchdown boots can be recrafted
• handcrafted in Portland, Oregon, USA

Go to Item

409,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 445 g
• dimensions: approx. 150 x 190 x 70 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

2M Bronze MM-Tonabnehmer

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

RMX-44 BT

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MULTI-FUNCTIONAL
The Reloop RMX-44 BT is a 4-channel Bluetooth DJ club mixer in classic design, including a Bluetooth input with cue function, which offers numerous application possibilities. The intuitive Club mixer layout guarantees a simple overview and allows experienced artists to find their way around immediately.

FLEXIBLE USABILITY
With 9 inputs and 4 outputs, as well as a 3-band EQ and bipolar filter unit per channel, the RMX-44 BT is not only a full-fledged DJ club mixer, but thanks to Bluetooth compatibility and the 2-band EQ microphone section with talk-over function, it is also ideal for bars, mobile DJs and home setups.

UNIVERSAL CONNECTIVITY
Thanks to the Smart Connectivity Bluetooth input, Smartphones, laptops as well as iPad’s and other devices can be connected quick and easily. In combination with its numerous other connection opportunities, the RMX-44 BT is up to any challenge and adapts perfectly to any application.

FREQUENCY MIXING IN DIGITAL SOUND ARCHITECTURE
For creative frequency mixing, the RMX-44 BT offers dedicated, bi-polar sound filters per channel to allow smooth low- and high-pass fading. The fully digital sound architecture enhances your sound to be clear and punchy in every situation.

HIGH QUALITY DESIGN
The sturdy metal construction and scratch-resistant surface with a deep black metallic finish make the RMX-44 BT extremely durable, despite frequent use and transport. The fabrication meets the industry’s highest quality standards and is visually and haptically particularly attractive. In addition, the stylish and timeless design blends perfectly into any DJ setup.

FEATURES
• 4-channel Bluetooth DJ club mixer
• 9 inputs, 4 outputs
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs
• Smart connectivity Bluetooth input with cue function
• 3-band EQ
• Sound filter, bi-polar filter unit with LPF and HPF
• High-quality surface in deep black metallic
• Fully digital architecture for outstanding sound
• Sturdy metal construction
• RMX Innofader compatible
• Crossfader curve adjust
• Mic channel with 2-band EQ & talk-over ''Active Ducking Technology'' for mic channel
• Headphones output (6.3 mm jack)
• Incl. power cord, instruction manual

TECHNICAL DATA
• Frequency range 20 Hz – 20kHz
• Inputs: 2x Phono RCA, 6x Line RCA, 1x Mic XLR/Jack
• Outputs: 1 Master XLR (balanced), Master RCA (unbalanced), Booth RCA (unbalanced), Rec RCA (unbalanced), headphones (6,3 mm jack)
• EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
• Dimensions: 320 x 106.4 x 379.4 mm
• Weight: 5,4 Kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/3/243591_Reloop_IM.pdf

Go to Item

2MR Bronze

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2MR: the newest addition to the renowned 2M Series
Ortofon 2MR features a specially designed cartridge housing tailored for turntables and tonearms like Rega matching their requirement for low-form factor cartridges. With its narrow cartridge housing, it seamlessly integrates without a need for modifications or spacers under the tonearm, enabling quick and easy mounting with just two screws. Ortofon 2MR cartridges features unique to Ortofon technologies like: High-performance quad coil motor system with split pole pins, Proprietary Ortofon premium and high-end rubber dampers plus full compatibility with the Ortofon 2M series styli.

Authentic sound reproduction
2MR continues the 2M Series' commitment to authentic sound reproduction.
A high-performance motor system featuring quad coils and split pole pins minimizes eddy current losses, enhancing channel balance and accuracy.
This innovation results in a clean, detailed, and true-to-life sound, faithfully capturing the nuances of your cherished vinyl collection.

More than just a cartridge
2MR cartridge are for those who value an authentic immersive listening experience when listening to their music. 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.
The 2MR maintains the hallmark of interchangeability, allowing you to explore your records in greater depth and detail. The seamless transition between stylus profiles lets you tailor your listening experience, ensuring every note is heard with unparalleled accuracy and emotion. The 2MR series empowers you to explore your records like never before, allowing you to savor every moment of your favorite music.
The 2MR lets you rediscover your vinyl collection with enhanced clarity and precision.

2MR cartridge key features:
• Slimline cartridge body effectively eliminates the need for tonearm spacers, shims or modifications on turntables needing a low form factor cartridge.
• High-performance motor system incorporating unique to Ortofon quad coils with split pole pins, delivering a clean detailed and true-to-life sound.
• 100% compatibility with the 2M styli Ortofon 2MR use the well-known 2M styli.
• Standard half inch mounting quick and easy mounting on the tonearms with just two screws.
• Full range setup 2MR ranges from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• 2MR cartridge weight - 6 g
• 2M and 2M Verso cartridges weight - 7.2 g
• 2M Premounted cartridge weight - 16.7 g

Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime:
with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Go to Item

2.5L Hiker Rain Jacket

379,95 €*

Available Sizes: 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

The and wander 2.5L Hiker Rain Jacket has been constructed from a durable water-repellent fabric with 2.5 layers of wet polyurethane coating and a porous membrane on an outer material made of 70 denier in length and 160 denier in width. The and wander 2.5L Hiker Rain Jacket's ventilation option to prevent stuffiness is designed to open wide toward the front body so that the pockets of the clothes inside can be easily accessed.

and wander 2.5L Hiker Rain Jacket - features:

• high-necked, drawstring-adjustable hood with sturdy eyelets and toggles at the elastic draw cord
• hidden 2-way front zipper with custom pull and exterior plus interior storm flap
• 2 XL front pockets with waterproof zip closure
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• waterproof underarm zippers
• adjustable straps with hook and loop fasteners at cuffs
• partial reflective stitching
• reflective and wander logo printed at left sleeve
• relaxed fit
• fabric: 100% nylon with backside polyurethane laminate

Go to Item

Snow Peak

Double Unit BBQ Box

379,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Designed and manufactured in Japan, the Snow Peak Double Unit BBQ Box is perfect for group cookouts in the backyard or at camp. Rest the lid on the grate to hold in heat when cooking dense meat or keep it open for a crispy finish. To begin grilling, simply fill the lower section of the Snow Peak Double Unit BBQ Box with charcoal and ignite, then replace the grill net. The Snow Peak Double Unit BBQ Box is compatible with the Iron Grill Table system and can also be used as a standalone grill. Weight: approx. 9.2 kg; dimensions: approx. 60.5 x 36 x 17 cm. Fuel type: Charcoal, wood.

Go to Item

Dyneema Backpack

379,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The and wander Dyneema Backpack is made of ultra-thin DSM's Dyneema composite fabric (formerly Cuben Fiber) which is made by laminating Dyneema fibers with UV resin. This fabric is used in high-performance sails for racing boats, it's ultra-lightweight, highly waterproof and tear strength.

The and wander Dyneema Backpack is equipped with the following features:

• roll-top with center strap including side-release buckle
• 2 side pockets with drawstring adjustment
• adjustable, padded, and ergonomic shoulder straps with bungee cord details
• slightly reinforced back panel
• top handle
• weight: 260 g
• dimensions: approx. 28 x 45 x 15 cm
• 100% polyethylene Dyneema
• details/trim: 100% polyester
• made in Japan

Go to Item

Headliner

375,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

R2 2-CHANNEL ROTARY DJ MIXER

Introducing the Headliner R2, a 2-channel rotary DJ mixer that is perfect for DJ’s looking for precise control and a warm sound, without breaking the bank. The R2 is packed with features, like an analog filter and 3-band isolator EQs on each channel, and uses only high-quality components, including genuine ALPS potentiometers.
Featuring two stereo channels with selectable Line and Phono RCA inputs, each channel on the Headliner R2 comes equipped with gain control with a peak LED, a 3-band isolator EQ, a headphone cue selector, a large channel volume control knob, and a filter activation switch.
The Master channel boasts an analog filter, headphone monitoring, and output control section. The analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls, giving you precise control over your sound. Independent Master and Booth outputs with volume controls, both with balanced XLR and unbalanced RCA connectors, give you the flexibility to connect to any sound system.
The Headliner R2 features genuine ALPS potentiometers, and a sturdy metal enclosure with stained wood side panels for a classic look that will complement any DJ setup. The modular internal construction, coupled with the external power supply connected via locking Mini XLR ensure superior audio performance.
The Headliner R2 is a reliable, high-quality mixer that will give your DJ performances that classic vibe. Whether you’re spinning house, techno, or classic funk/soul/disco jams, this fun little mixer is the perfect addition to your setup.

Technical specifications:

• Two stereo channels with selectable Line and Phono RCA inputs
• Each channel features Gain control with Peak LED, 3-Band Isolator EQ, Headphones Cue selector with LED, channel
volume control and filter activation switch with LED
• Master channel features analog filter, headphone monitoring and output control section
• Analog filter features selectable High Pass / Low Pass Filter modes with Frequency and Resonance controls
• Genuine ALPS potentiometers
• Headphone Cue control section features volume control, mix control (Cue/Master), and split monitor switch
• High current headphone amplifier with dual 1/4” and 1/8” jacks
• Independent Master and Booth outputs with volume controls, balanced XLR outputs and unbalanced RCA outputs
• Additional Record output with unbalanced RCA jacks
• Dual LED level meters for the Master output
• Microphone input with level control on front panel
• Sturdy metal enclosure with stained wood side panels
• Modular internal construction for superior audio performance
• External split rail power supply connected via locking Mini XLR connector and push-button power switch
• Measurements: 320 x 219 x 106 mm
• Weight: 2.8 kg

Microphone Input:
Nominal Input Level: -50dBu
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.1%
EIN: -120dBu (150Ω Load)
Input Impedance: 3 kOhm

Line Inputs:
Nominal Input Level: -10dBV (-7.8dBu)
Gain Range: -12dB to +12dB
Frequency Response: 20Hz – 20kHz (+/- 0.1dB)
THD + N: < 0.05%
Input Impedance: 47 kOhm

Phono Inputs:
Maximum Input Level: -40dBu
Gain Range: -12dB to +12dB
Frequency Response: RIAA

Main Outputs:
Nominal Output Levels, balanced: +4dBu
Maximum Output Level, balanced: +20dBu
Nominal Output Levels, unbalanced: -10dBV (-7.8dBu)
Maximum Output Level, unbalanced: +12dBu
Frequency Response: 20Hz-20kHz (+/-0.5dB)
Residual noise: <-80dBu Dynamic Range: > 100dB
Crosstalk: < -65dB
THD + N: < 0.05%

Headphone Output:
Maximum Output Level: 70mA/channel into 150Ω
Minimum Load Impedance: 32 Ohms/channel

Power Supply:
Type: External with locking mini-XLR connector
Input Voltage: 100-240v ~ 50/60Hz
Output Voltage: +/-15V; 500mA
Voltage Range: 32 Ohms/channe
THD + N: < 0.05%
Input Impedance: 47 kOhm

Go to Item

FrizmWORKS

Oscar Fishtail Jacket

359,95 €*

Available Sizes: L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Established in 2010 by founder An Jong Hyun as an answer to quality heritage workwear with more modern and contemporary fits, Korean brand FrizmWORKS delivers basic styles with a slight twist on the traditional in an outstanding quality. Frizmworks isn’t about trends, its designs are simple and timeless, from head to toe.

FrizmWORKS Oscar Fishtail Jacket - features:

• high-necked collar with drawstring-adjustable hood
• hidden metal front zipper with custom pull
• snap button closure at storm flap
• drawstring-adjustable waistline
• 2 symmetric front pockets with snap button closure at flaps
• drawstring-adjustable bottom hem
• adjustable button cuffs
• relaxed fit
• fabric: 60% cotton, 40% nylon

The FrizmWORKS Oscar Fishtail Liner Jacket is equipped with the following features:

• onion quilted stitching
• tonal bordering at hemlines
• button front closure
• 2 patch pockets with snap button closure at lower front
• slightly curved bottom hem with side notches
• regular fit
• shell/lining: 100% polyester
• insulation: 100% polyester
• made in South Korea

Go to Item

FrizmWORKS

Oscar Fishtail Jacket

359,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Established in 2010 by founder An Jong Hyun as an answer to quality heritage workwear with more modern and contemporary fits, Korean brand FrizmWORKS delivers basic styles with a slight twist on the traditional in an outstanding quality. Frizmworks isn’t about trends, its designs are simple and timeless, from head to toe.

FrizmWORKS Oscar Fishtail Jacket - features:

• high-necked collar with drawstring-adjustable hood
• hidden metal front zipper with custom pull
• snap button closure at storm flap
• drawstring-adjustable waistline
• 2 symmetric front pockets with snap button closure at flaps
• drawstring-adjustable bottom hem
• adjustable button cuffs
• relaxed fit
• fabric: 60% cotton, 40% nylon

The FrizmWORKS Oscar Fishtail Liner Jacket is equipped with the following features:

• onion quilted stitching
• tonal bordering at hemlines
• button front closure
• 2 patch pockets with snap button closure at lower front
• slightly curved bottom hem with side notches
• regular fit
• shell/lining: 100% polyester
• insulation: 100% polyester
• made in South Korea

Go to Item

Alpha Air Vest

359,95 €*

Multi-Format Case Player/Mixer (V10/A9) Set

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

The and wander Alpha Air Vest is a lightweight vest made from waterproof, wind-blocking Pertex® QuantumAir fabric. Even if you hate dancing in the rain, this and ander vest is a nice, functional addition to your wardrobe.

and wander Alpha Air Vest - features:

• high-necked collar
• YKK metal front zipper with custom pull and interior storm flap
• chest pockets with reflective tape at zip closure at wearer's left
• 2 zip pockets at lower front
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• reflective and wander triangle logo printed at left front
• relaxed fit
• shell: Pertex® QuantumAir made from 100% nylon
• lining: 100% nylon
• padding: PolarTec® Alpha made from 100% polyester
• made in Japan

Go to Item

Magma

359,90 €*

Multi-Format Battle-Workstation

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

• Pioneer DJM-V10
• Pioneer DJM-A9
• Pioneer DJM-900 NXS2
• Pioneer DJM-900 NXS / SRT
• Pioneer DJM-800 / 700 / 600
• Pioneer CDJ-3000
• Pioneer CDJ-2000 NXS2
• Pioneer CDJ-2000 NXS
• Pioneer CDJ-900 / 850 / 800
• Pioneer XDJ-1000
• Allen & Heath PX5
• Allen & Heath DB4
• Allen & Heath DB2
• Allen & Heath Xone 92 / 62 / 43C
• Denon LC 6000 Prime
• Denon SC-6000 / SC-6000M
• Denon SC-5000 / SC-5000M
• Denon X1850 / X1800
• Denon X1600
• Denon SC3900
• Denon SC2900
• Reloop RMX-90 DVS
• Reloop RMX-80 Digital
• Ecler Warm 4
• Ecler NUO4
• Rane MP2015
• Rane Sixty-Eight / Sixty-Four

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Solid aluminum profiles and spring loaded latches
• Additional foam to fit various mixer and CD-player models
• 3 removable front panel covers
• Convenient cable access ports
• Full padded interior
• Incl. recessed wheels for easy transportation

SPECS:

• Outer measures: 80 x 59 x 22,5 cm
• Inner measures: 33,1 x 42,5 x 8,4 cm (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
• Weight: 21,5 kg

Go to Item

Magma

359,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

One size fits all! The new Multi-Format Battle-Workstation is a protective and flexible solution for the touring DJ that needs to transport a 10’’ battle-mixer along with two turntables or the new Rane Twelve players. The practical multi-format design includes several foam strips to accommodate various 10’’ battle-mixer and turntable models from Pioneer, Rane, Technics etc. Thanks to its removable front panel covers, the useful cable access ports and the extra wide gliding laptop platform, the workstation is ready for action in no time at all as the equipment does need not to be removed from the case anymore. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

FITS:

Turntables:
• Technics 1200/1210 G
• Technics 1200/1210 GR
• Technics 1200/1210 MK2
• Rane Twelve
• Rane Twelve MK2
• Audio Technica LP120-USB
• Audio Technica LP1240-USB
• American Audio Power Drive 2
• DJ-Tech SL-1300MK6
• Denon VL12
• Epsilon DJT-1300
• Mixars STA
• Numark TTX
• Numark CDX
• Pioneer PLX-1000
• Pioneer PLX-500
• Reloop RP-8000
• Reloop RP-7000
• Reloop RP-6000
• Reloop RP-4000
• Reloop RP-2000
• Roland TT-99
• Stanton ST-150
• Vestax PDX 3000

Mixers:
• NI Kontrol Z2
• Mixars Duo
• Pioneer DJM-S11
• Pioneer DJM-S7
• Pioneer DJM-S9
• Pioneer DJM-909
• Pioneer DJM-707
• Rane Seventy-Two
• Rane Sixty-Two
• Rane Sixty-One
• Rane TTM57 MK2
• Rane TTM57 SL
• Rane TTM-56
• Rane MP-2014
• Reloop Kut
• Reloop Elite
• Thud Rumple TRX
• Vestax PMC-07
• Vestax PMC-05

BASICS:

• Heavy duty construction of 9 mm vinyl laminated plywood
• Incl. recessed wheels for easy transportation
• Solid aluminum profiles and spring loaded latches
• Secure ball corners
• Solid rubber-feet
• Convenient cable access ports
• Additional foams to fit various mixer and turntable models

SPECS:

• Outer dimensions: 116 x 57 x 24 cm
• Inner dimensions: 37 x 52 x 8,3 cm (Turntable-compartment), 29 x 52 x 8,3 cm (Mixer compartment)
• Weight: 25 kg
• Color: black/black (Item-No.: 41017 / EAN-Code: 4041212410177)

Go to Item

A.P.C.

Veste Jamie

356,95 €* 419,95 € -15%

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Veste Jamie by A.P.C. is a timeless garment that combines the functional properties of an overshirt with the elegant aesthetics of a short coat. This versatile A.P.C. jacket is made from a warming wool blend that contains a high percentage of recycled wool, making it not only stylish but also environmentally conscious.

The choice of material for the A.P.C. Veste Jamie speaks for itself: the wool blend ensures excellent thermal insulation and comfort, while the use of recycled wool underlines the brand's sustainable values. This combination makes this A.P.C. jacket perfect for the cooler months while offering an eco-friendly option for fashion-conscious consumers.

The design of the A.P.C. Veste Jamie is both functional and fashionable. The jacket is equipped with a regular fit with a straight cut, which offers enough room for layering and is therefore versatile. It is basically suitable for three seasons - this flexibility makes it an essential part of any well-stocked wardrobe.

Another notable feature of the Veste Jamie is its classic yet contemporary cut. The jacket has an elegant collar that can be worn casually open or closed to provide additional protection from the cold. The button placket gives this A.P.C. jacket a traditional look.

The Jamie vest by A.P.C. is equipped with several functional pockets that not only enhance the design of the jacket, but are also functional. The patch pocket at left chest as well as two welt pockets at lower front offer plenty of space for smaller items, while an inside pocket provides additional storage space for valuables. These well thought-out details contribute to the versatility and functionality of this A.P.C. jacket.

The workmanship of the Veste Jamie is, as usual by A.P.C., of the highest quality. The seams are precise and sturdy, which guarantees the jacket's longevity. The use of high-quality materials and careful workmanship ensure that the jacket retains its shape and comfort even after frequent wear.

A.P.C. Veste Jamie - features:

• turn-down collar
• button front closure
• self-fabric patch pocket at left chest
• 2 side entry welt pockets at lower front
• back yoke
• contrast lining
• interior chest pocket at wearer's left
• regular fit
• shell: 70% recycled wool, 25% polyamide, 5% other fibers
• lining: 100% viscose

Go to Item

349,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 415 g
• dimensions: approx. 230 x 140 x 50 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Flux

346,75 €* 365,00 € -5%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RELOOP FLUX - 6X6 IN/OUT USB-C DVS INTERFACE FOR SERATO DJ PRO

We are excited to introduce the Reloop Flux: A next-generation 6x6 In/out USB-C DVS Interface for Serato DJ Pro. It can transform any conventional mixer into a professional digital vinyl system.

BACK TO THE MUSIC
The Reloop Flux is a next-generation USB-C interface for using Serato DJ Pro with turntables, CDJs or other media players. The interface boasts superior audio qualities, a well-designed operating concept and a club-ready design. It can transform any conventional mixer into a professional digital vinyl system.

MAXIMUM FLEXIBILITY
Three stereo inputs provide DJs with maximum flexibility. Turntables, CDJs and similar can be used in any combination. The settings are adjusted using discreet DIP switches, which virtually eliminates any chance of accidental switching in the club. The interface includes three stereo outputs, including an AUX out that can be routed to Serato DJ Pro´s internal sampler. Gold-plated, corrosion-resistant RCA jacks ensure high-quality audio transmission.

FULL CONTROL
The Flux provides the best possible routing overview thanks to clearly visible signal flow LEDs for all inputs and outputs and a Thru status indicator. Connection status (hub, PD, DC) LED indicators on the top of the interface provide additional control options. The Direct Thru buttons on the top of the interface enable you to quickly and easily activate and disable Thru mode, which allows connected turntables and CDJs to be used conventionally. Navigation through the Serato software is no longer necessary.

HUB INSIDE
The Flux includes a built-in 2-port USB-A hub for connecting MIDI controllers and other USB accessories. Aside from the expanded connection options, the hub reduces potential connection faults in a busy club environment by keeping the setup connected even without the laptop.

STUDIO QUALITY – ANYTIME, ANYWHERE
The Flux offers studio quality in the club and wherever it's needed with 24-bit/96 kHz, high-quality digital/analogue converters and ultra-low latency. For this reason, it’s a superior DVS interface which could also be used as an audio interface in the studio.

ALWAYS POWERED
The Flux is bus-powered by a computer, so there's minimal wiring required for audio and power cables. The DVS interface can also be powered by external power sources through the USB-C DC input, allowing turntables and CDJs to be used in Thru mode even without a computer connected. The Flux's second USB-C port provides Power Delivery support for other USB-C devices (max. 60 W), such as a MacBook.

ROBUST AND ROADWORTHY
The interface has a durable metal housing with a scratch-resistant, black surface, ensuring a long service life even with heavy use. The extended edge design keeps the connections well-protected.

PLUG & PLAY FOR SERATO DJ Pro
The Reloop Flux unlocks the full version of Serato DJ Pro and Serato DVS. This means DJs can get up and running with the market-leading digital vinyl system in no time. Additional licences are not necessary.

FEATURES:
• 3-channel (6x6 in/out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96kHz with high-quality D/A converters for superior audio processing
• Also functions as a stand-alone studio interface for recording and playback audio
• 3x inputs for turntables, CD players or AUX-In for live feed signal, switchable in any combination via dedicated dip switches
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• 3x line outputs, including AUX-Out, assignable to the Sampler
• Easy, accessible direct thru buttons for analogue deck playback
• All terminals are visible from the top of the unit for easy installation in dark surroundings
• Bus-powered cable connection for power and audio
• Optional USB-C DC in port for external power supply
• Power delivery support for USB-C devices (max 60W)
• Signal-flow LEDs for all inputs and outputs (L/R) and thru indication for clear visibility
• Power LEDs on the top panel for connection status (Hub, PD, DC)
• 2-port USB-A hub for connecting further accessories
• Rugged, heavy-duty metal housing with a scratch-resistant black finish for durability on the road and reliability in the club
• Highly robust, extended edge design to protect connection terminals
• Supports the use of Serato NoiseMap™ control vinyl (not included) or custom control signal WAV file for use via CDs or USB drive (download available) with no additional license purchase needed
• Including: 2x RCA audio cables, 1x USB-A to USB-C, 1x USB-C to USB-C, user manual

TECHNICAL DATA:
Power:
• USB bus powered: Yes
• Recommended power: 2 A or higher / minimum power: 400 mA
• Maximum USB-PD throughput: 60 W
• Maximum USB Hub power output: 2 x 0.8 A = 8 W
• Supported external USB (type A or C) power supply: 5 V/1 A - 20 V/3 A
• Power supply priority: FLUX self-power -> USB Hub -> PD (to PC)

Audio:
• S/N Ratio (output reference level 1 kHz, +4 dB):
• Deck In (LINE signal input: 0 dBV): More than 83 dB
• Deck In (PHONO signal input: -32 dBV): More than 73 dB
• THD + N:
• LINE signal input: -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
• PHONO signal input: -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)

Maximum Gain:
• Deck In (LINE): +4 dB ± 2 dB
• Deck In (PHONO): +36 dB ± 2 dB
• Maximum Input (1 kHz, THD=1%):
• Deck In (LINE): More than +7 dBV
• Deck In (PHONO): More than -25 dBV
• Maximum Output (1 kHz, THD=1%):
• Deck Output: More than +11 dBV

USB:
• USB audio interface with 24 bit/44.1 kHz, 48 kHz, 96 kHz
• USB 2.0 high-speed (480 Mbit/s)
• Class-compliant on macOS
• USB Power Delivery Protocol 3.0

General:
• Dimensions (WxDxH): 160 x 120 x 34 mm
• Weight: 0.85 kg

Accessories:
• User Manual
• 1x USB type C/C cable
• 1x USB type C/A cable
• 2x RCA cables

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/5/245389_Reloop_IM.pdf

Go to Item

Water Repellent Light Jacket 2

344,96 €* 459,95 € -25%

Available Sizes: L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

and wander Water Repellent Light Jacket 2 - features:
• high-necked, drawstring-adjustable hood with snap button strap
• hidden, off-centered metal front zipper with custom pull and interior plus exterior storm flap
• 2 cargo pockets with snap button closure plus side-entry compartments at lower front
• elastic bottom band
• snap button-adjustable cuffs
• contrast mesh lining
• interior patch pocket with zip closure at wearer's lower right
• reflective and wander logo printed on left cargo pocket
• relaxed fit
• shell: 100% nylon (made of 20 denier for the warp and matted nylon 45 denier yarn for the weft with a durable water repellent finish)
• lining: 100% polyester mesh
• weight: approx. 450 g

Go to Item

Oversized Cargo Pants

339,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

and wander Oversized Cargo Pants - features:
• waistband with built-in nylon belt including and wander jacquard branding, reflective details plus sturdy plastic buckle
• hidden front center button
• zip fly
• 2 large front pockets with flaps and button closure
• 2 large cargo pockets with button closure at upper outseams
• 2 flap pockets with button closure at the rear
• bartack stitching at vital stress points
• drawstring-adjustable bottom hem
• tonal and wander logo embroidery above right back pocket
• and wander branding at buttons
• regular waist, loose fit, tapered leg
• 67% polyester, 33% nylon coated rip-stop fabric with water-repellant finish

Go to Item

Oversized Cargo Pants

339,95 €*

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

and wander Oversized Cargo Pants - features:
• built-in nylon belt with and wander jacquard branding, reflective details plus sturdy plastic buckle
• hidden front center button
• zip fly
• 2 large front pockets with flaps and button closure
• 2 large cargo pockets with button closure at upper outseams
• 2 flap pockets with button closure at the rear
• bartack stitching at vital stress points
• drawstring-adjustable bottom hem
• tonal and wander logo embroidery above right back pocket
• and wander branding at buttons
• regular waist, loose fit, tapered leg
• 67% polyester, 33% nylon coated rip-stop fabric with water-repellant finish

Go to Item

Engineered Garments

19 Century BD Shirt

329,95 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 19 Century BD Shirt by Engineered Garments is a special garment that impresses with its unique design and innovative construction. This long-sleeved shirt from Engineered Garments is more than just a simple basic piece: it combines traditional elements with a modern, experimental approach that is characteristic of the brand.

What makes the 19 Century BD Shirt by Engineered Garments so special is the way it was put together. Instead of being made from a single piece of fabric, the shirt consists of several panels that have been treated and sewn differently. These panels are equipped with different finishes and textures, giving the shirt an extraordinary depth and complexity. Despite the monochrome color scheme, the interplay of materials creates the impression of a plain-colored patchwork. The subtle contrast of the different surface structures gives the shirt an extraordinary visual appeal without being too conspicuous. It is the art of engineered garments to create striking pieces with small details and a minimalist approach.

The name of the shirt, 19 Century, alludes to the traditional men's shirt that was popular in the 19th century. The button placket and classic button-down collar are clear references to the fashion of this historical era, giving the shirt a nostalgic touch. But Engineered Garments wouldn't be Engineered Garments if they didn't play with such classic silhouettes to transform them into a modern garment.

The workmanship and stitching of the shirt also deserve special attention. The patchwork look is further emphasized by the different sewing techniques and the use of different textures. It is these artisanal details that make the 19 Century BD Shirt an expression of high-quality tailoring.

Despite its avant-garde design, the 19 Century BD Shirt by Engineered Garments is surprisingly versatile. It can be worn for both formal and casual occasions and effortlessly adapts to different styles. Whether combined with classic suit trousers or casual jeans, this shirt always ensures a stylish, individual look. It is perfect for those who appreciate subtle yet striking details and have a penchant for exceptional design.

Overall, the 19 Century BD Shirt by Engineered Garments embodies the perfect symbiosis of traditional style and modern design, making it a must-have for fashion enthusiasts looking for something special.

Relaxed fit; 100% cotton. Made in USA.

Go to Item

Concorde MkII CLUB Twin

329,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

• incl. Brush
• incl. Flight Case

Video: https://youtu.be/WZnFkEwAnCo

supplied in Flight case

Go to Item

Heat Waist Bag

319,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 410 g
• dimensions: approx. 230 x 130 x 75 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

Go to Item

Stanton

STX

309,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

STANTON STX
LIMITED EDITION PORTABLE SCRATCH TURNTABLE
RAZOR SHARP CUTS, RIGHT AWAY

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivaled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

SCRATCH WHENEVER, WHEREVER
Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use.
The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB-C input. For extended scratch sessions, the USB-C input can also be used with external power sources for even more cutting time.
To top everything off (literally), the latching lid also functions as a stackable, latching base, to bring the STX to standard turntable height.

WELL-CONNECTED FOR CREATORS
Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8” stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

PERFORMANCE READY
The modification culture is alive and well in the portablism world. Since the inception of this art form, we’ve seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Technical Specifications
Connections (1) RCA line-level output (stereo pair)
(1) 1/4” (6.35 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recordings

Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power (2) 3.7V Li-ion batteries

Dimensions
(width x depth x height)
13.0” x 13.0” x 4.0” (3.25” without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)

Weight 5.3 lbs.
2.4 kg

Go to Item

Breath Rip Hoodie

303,96 €* 379,95 € -20%

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATTENTION: Since this is an item from Japanese production, the fit was adjusted to the standard there - for this reason, we recommend to take the next size up for a fit as shown!

and wander Breath Rip Hoodie - features:
• high-necked, drawstring-adjustable hood with toggles at the elastic draw cord
• sturdy front zipper with custom pull
• mesh pocket with zip closure at left chest
• 2 pockets with zip closure at lower front
• drawstring-adjustable bottom hem with sturdy eyelets and toggles at the elastic draw cord
• mesh pocket with zip closure at left sleeve
• stretch bordering at cuffs
• reflective and wander logo printed on left front
• reflective stitching
• relaxed fit
• main fabric: 100% nylon 30D x 160D rugged rip-stop that's durable and highly water repellent
• details: 100% polyester

Go to Item

AIAIAI

TMA-2 DJ Wireless

299,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2025-01-24

How Big, How Blue, How Beautiful

Florence And The Machine

| 2015 | UK | Original (Island)

299,99 €*

Release: 2015 / UK – Original

Genre: Rock & Indie, Pop

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Used Vinyl

Medium: VG+, Cover: VG+

adidas x Wales Bonner

Samba

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For its Fall/Winter '24 collection, adidas has teamed up with Wales Bonner, a real heavyweight in the world of fashion. Wales Bonner is a London-based menswear label that has been pursuing a unique concept since 2014, combining European heritage with an Afro-Atlantic spirit.

When first introduced in 1962, the adidas Samba was the first football training shoe developed for frozen pitches. Eventually the Samba developed and established itself a the premier indoor football shoe. Since then this shoe has evolved to a terrace staple and has now gone on to become a modern day street classic in its own right.

The version remixed for the adidas x Wales Bonner collab only resembles the original Samba in terms of shape and a few basics – the most striking innovations are the use of high-quality cowhide with croc skin texture embossed as the upper material, satin-finished textile lining as well as the eye-catching structured tongue in a contrasting color that also features a handcrafted adidas x Wales Bonner label.

The adidas x Wales Bonner Samba's features include:

• slim silhouette
• premium cow leather with embossed croc texture
• gold metal eyelets at lacing
• satin textile lining
• 3 Stripes nubuck leather appliqués on side walls
• foam-padded insole
• rubber outsole
• adidas x Wales Bonner handmade woven label on textured tongue
• 3 Stripes branding embossed at heel patch
• moustache deco-stitching at heel

Go to Item

adidas x Wales Bonner

Samba

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

G-Shock x Central Cee

GM-2110D-3AER

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The G-Shock has long enjoyed great popularity in hip-hop circles, so it's a logical consequence to engage one of the most popular artists of the moment, Central Cee, for the latest collabo series. The rapper from West London not only regularly manages to stir up the charts, he is also a role model in terms of style awareness, whereby he likes to go his own path. Thus, Central Cee perfectly embodies the Built Different spirit that the G-Shock by Casio represents.

Inspired by the GA-2100, the G-Shock x Central Cee GM-2110D is an analog-digital combination from the G-Steel series by Casio. The carefully forged and polished, evenly octagonal stainless steel bezel combines a simple, uncomplicated design with a sophisticated yet sturdy look. The G-Shock x Central Cee GM-2110D's case, made of high-strength glass-fiber-reinforced resin, is the slimmest of all G-Shock analog-digital models at just 11.8 mm. The stainless steel bracelet and metallic brass dial add a fresh pop of color and are the perfect companion on your wrist.

G-Shock x Central Cee GM-2110D-3AER - Features/Specifications:

• case size (L x W x H): 49.3 × 44.4 × 11.8 mm
• weight: approx. 146 g
• case and bezel material: resin/stainless steel
• stainless steel band with triple-fold one-touch clasp
• shock resistant
• water resistant to 20 bar
• glass: mineral glass
• band length: 150 to 205 mm
• Neobrite
• world time: 31 time zones (48 cities + coordinated universal time), summer time on/off
• stopwatch: 1/100 sec. stopwatch - measuring capacity: 00'00''00~59'59''99 (for the first 60 minutes) / 1:00'00~23:5 9'59 (after 60 minutes); unit of measurement: 1/100 sec. (for the first 60 minutes) / 1 second (after 60 minutes); measurement modes: elapsed time, split time, 1st-2nd place times
• timer: Countdown timer – unit of measure: 1 second; countdown range: 24 hours; countdown start time entry range: 1 second to 24 hours (in increments of 1 second, 1 minute, and 1 hour)
• alarm/hourly time signal: 5 daily alarms; hourly time signal
• lighting: double LED light; LED illumination for the dial (Super Illuminator, selectable illumination time (1.5 seconds or 3 seconds), afterglow); LED backlight for the digital display (Super Illuminator, selectable illumination time (1.5 seconds or 3 seconds), afterglow)
• light color: LED white
• calendar: fully automatic calendar (until 2099)
• mute function
• accuracy: ±15 seconds per month
• 12/24 hour format
• hand adjustment function (hands move to allow an unobstructed view of digital content)
• regular timekeeping: analog - 2 hands (hours, minutes > hands move every 20 seconds), 1 dial (day) / digital - hours, minutes, seconds, 12-hour clock (pm), month, date

Go to Item

G-Shock x Central Cee

GM-2110D-2AER

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The G-Shock has long enjoyed great popularity in hip-hop circles, so it's a logical consequence to engage one of the most popular artists of the moment, Central Cee, for the latest collabo series. The rapper from West London not only regularly manages to stir up the charts, he is also a role model in terms of style awareness, whereby he likes to go his own path. Thus, Central Cee perfectly embodies the Built Different spirit that the G-Shock by Casio represents.

Inspired by the GA-2100, the G-Shock x Central Cee GM-2110D is an analog-digital combination from the G-Steel series by Casio. The carefully forged and polished, evenly octagonal stainless steel bezel combines a simple, uncomplicated design with a sophisticated yet sturdy look. The G-Shock x Central Cee GM-2110D's case, made of high-strength glass-fiber-reinforced resin, is the slimmest of all G-Shock analog-digital models at just 11.8 mm. The stainless steel bracelet and metallic brass dial add a fresh pop of color and are the perfect companion on your wrist.

G-Shock x Central Cee GM-2110D-2AER - Features/Specifications:

• case size (L x W x H): 49.3 × 44.4 × 11.8 mm
• weight: approx. 146 g
• case and bezel material: resin/stainless steel
• stainless steel band with triple-fold one-touch clasp
• shock resistant
• water resistant to 20 bar
• glass: mineral glass
• band length: 150 to 205 mm
• Neobrite
• world time: 31 time zones (48 cities + coordinated universal time), summer time on/off
• stopwatch: 1/100 sec. stopwatch - measuring capacity: 00'00''00~59'59''99 (for the first 60 minutes) / 1:00'00~23:5 9'59 (after 60 minutes); unit of measurement: 1/100 sec. (for the first 60 minutes) / 1 second (after 60 minutes); measurement modes: elapsed time, split time, 1st-2nd place times
• timer: Countdown timer – unit of measure: 1 second; countdown range: 24 hours; countdown start time entry range: 1 second to 24 hours (in increments of 1 second, 1 minute, and 1 hour)
• alarm/hourly time signal: 5 daily alarms; hourly time signal
• lighting: double LED light; LED illumination for the dial (Super Illuminator, selectable illumination time (1.5 seconds or 3 seconds), afterglow); LED backlight for the digital display (Super Illuminator, selectable illumination time (1.5 seconds or 3 seconds), afterglow)
• light color: LED white
• calendar: fully automatic calendar (until 2099)
• mute function
• accuracy: ±15 seconds per month
• 12/24 hour format
• hand adjustment function (hands move to allow an unobstructed view of digital content)
• regular timekeeping: analog - 2 hands (hours, minutes > hands move every 20 seconds), 1 dial (day) / digital - hours, minutes, seconds, 12-hour clock (pm), month, date

Go to Item

G-Shock x Central Cee

GM-2110D-7AER

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The G-Shock has long enjoyed great popularity in hip-hop circles, so it's a logical consequence to engage one of the most popular artists of the moment, Central Cee, for the latest collabo series. The rapper from West London not only regularly manages to stir up the charts, he is also a role model in terms of style awareness, whereby he likes to go his own path. Thus, Central Cee perfectly embodies the Built Different spirit that the G-Shock by Casio represents.

Inspired by the GA-2100, the G-Shock x Central Cee GM-2110D is an analog-digital combination from the G-Steel series by Casio. The carefully forged and polished, evenly octagonal stainless steel bezel combines a simple, uncomplicated design with a sophisticated yet sturdy look. The G-Shock x Central Cee GM-2110D's case, made of high-strength glass-fiber-reinforced resin, is the slimmest of all G-Shock analog-digital models at just 11.8 mm. The stainless steel bracelet and metallic brass dial add a fresh pop of color and are the perfect companion on your wrist.

G-Shock x Central Cee GM-2110D-7AER - Features/Specifications:

• case size (L x W x H): 49.3 × 44.4 × 11.8 mm
• weight: approx. 146 g
• case and bezel material: resin/stainless steel
• stainless steel band with triple-fold one-touch clasp
• shock resistant
• water resistant to 20 bar
• glass: mineral glass
• band length: 150 to 205 mm
• Neobrite
• world time: 31 time zones (48 cities + coordinated universal time), summer time on/off
• stopwatch: 1/100 sec. stopwatch - measuring capacity: 00'00''00~59'59''99 (for the first 60 minutes) / 1:00'00~23:5 9'59 (after 60 minutes); unit of measurement: 1/100 sec. (for the first 60 minutes) / 1 second (after 60 minutes); measurement modes: elapsed time, split time, 1st-2nd place times
• timer: Countdown timer – unit of measure: 1 second; countdown range: 24 hours; countdown start time entry range: 1 second to 24 hours (in increments of 1 second, 1 minute, and 1 hour)
• alarm/hourly time signal: 5 daily alarms; hourly time signal
• lighting: double LED light; LED illumination for the dial (Super Illuminator, selectable illumination time (1.5 seconds or 3 seconds), afterglow); LED backlight for the digital display (Super Illuminator, selectable illumination time (1.5 seconds or 3 seconds), afterglow)
• light color: LED white
• calendar: fully automatic calendar (until 2099)
• mute function
• accuracy: ±15 seconds per month
• 12/24 hour format
• hand adjustment function (hands move to allow an unobstructed view of digital content)
• regular timekeeping: analog - 2 hands (hours, minutes > hands move every 20 seconds), 1 dial (day) / digital - hours, minutes, seconds, 12-hour clock (pm), month, date

Go to Item

Sunflower

Yak Sweater

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Yak Sweater by Sunflower is a sophisticated knitted sweater that impresses with its high-quality material composition and classic, simple design. Made from a soft blend yarn that combines yak, alpaca and merino wool, this premium sweater not only offers exceptional comfort, but also excellent thermal insulation, making it the perfect companion for the colder months.

The yarn used for this Sunflower sweater is of the highest quality. Yak wool is known for its softness and ability to retain warmth without being too heavy. Alpaca wool adds extra softness and durability to the yarn, while merino wool is prized for its fine texture and breathable properties. This combination makes Sunflower's Yak Sweater incredibly comfortable to wear and ensures that it stays comfortable all day long.

The design of the Sunflower Yak Sweater is deliberately kept simple, which emphasizes its versatility and timeless elegance. The sweater has a classic silhouette that can be effortlessly integrated into different outfits. The understated style makes it a perfect basic for any wardrobe that can be worn both casually and elegantly.

The hue of this Sunflower knitted sweater is subtle and versatile, making it easy to combine with different colors and styles. Whether worn with jeans for a relaxed look or with suit trousers for a more elegant appearance, the Yak Sweater adapts to any situation and adds a sophisticated touch to your outfit.

In summary, the Yak Sweater by Sunflower is an outstanding piece of clothing that impresses with its excellent material quality, high level of comfort and timeless design. With its combination of yak, alpaca and merino wool, this sweater is not only functional and warm, but also makes a stylish statement for anyone who values quality and simplicity. Whether for everyday wear or special occasions, the yak sweater is the perfect choice for fashion-conscious people who value timeless elegance and first-class comfort.

Regular fit; knitted yarn made from 31% yak wool, 31% alpaca wool, 22% polyamide, 16% merino wool, 5 gauge.

Go to Item

Marshall

Stanmore III

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stanmore III has an even wider soundstage than its predecessor, delivering home-filling Marshall signature sound, re-engineered for a more immersive experience. The two-way driver system delivers a heavy but balanced sound, with crisp, soaring treble and controlled bass that really roars. Easily connect to this speaker from your device using Bluetooth, RCA or 3.5 mm and get listening.

STANMORE III KEY FEATURES
• Re-engineered wider stereo soundstage
• Pair, play and turn it up
• Next-generation Bluetooth
• Iconic design that stands apart
• A more sustainable approach
• Connect and control

AWARDS AND CERTIFICATIONS
• Reddot Design Award Winner 2023

RE-ENGINEERED WIDER STEREO SOUNDSTAGE
This generation of the home line-up has an even wider soundstage than before, delivering heavy Marshall signature sound that has been re-engineered for a more immersive experience. Generation III has tweeters angled outwards and updated waveguides to deliver a consistently solid sound that is so wide it chases you around the room.

PAIR, PLAY AND TURN IT UP
These speakers are straight to business, so you can just pair and play without the hassle of a complex set-up. You’ll find everything you need right there on the unit, including the Bluetooth pairing button, power switch, bass and treble controls and the control knob so you can easily control your music without ever picking up your device.

NEXT-GENERATION BLUETOOTH
Generation III is ready for the future of Bluetooth technology and has been built to deliver next-generation Bluetooth features the moment they are available. Over the Air (OTA) updates via the app ensure that your speaker is always up to date with the latest software and features.

ICONIC DESIGN THAT STANDS APART
Marshall has taken its signature rock ’n’ roll home speaker line-up and given it a stripped-back look that makes a loud statement. This iconic design knocks all other speakers off the shelf. Signature details such as the Marshall script and brass control knobs adorn each speaker, echoing the legacy of rock ’n’ roll.

A MORE SUSTAINABLE APPROACH
The home line-up has music at heart and the environment in mind. While staying true to the iconic design that speaks to the brand’s heritage, this generation takes a more sustainable approach with a PVC-free build made from 70% recycled plastic and only vegan materials. Durable and solid, comprising high-quality materials and components, you can trust that your speaker will last.

CONNECT AND CONTROL
With next-generation Bluetooth 5.2 and the 3.5 mm input, connecting to your speaker and listening to your music has never been so effortless. Download and connect to the Marshall Bluetooth app to access advanced settings and Over-the-Air (OTA) updates. While you can control the bass and treble on top of each speaker, you’ll also find additional controls in the app. Just connect to your speaker directly from your device and start listening.

WIRED CONNECTIVITY (3.5MM + RCA)
With next-generation Bluetooth 5.2, the RCA input and the 3.5 mm input, connecting to Stanmore III and getting the right sound has never been so effortless. Connect to your speaker directly from your device the way you want to.

PRODUCT DETAILS

POWER AMPLIFIERS:
• ONE 50 WATT CLASS D AMPLIFIER FOR THE WOOFER
• TWO 15 WATT CLASS D AMPLIFIERS FOR THE TWEETERS

CONNECTIVITY:
• 3.5 MM INPUT
• RCA INPUT

TOP PANEL CONTROLS
• SOURCE BUTTON
• VOLUME CONTROL KNOB
• BASS CONTROL KNOB
• TREBLE CONTROL KNOB
• PLAY/PAUSE BUTTON
• SKIP BACKWARD/FORWARD CONTROL KNOB
• POWER SWITCH

DIMENSIONS:
• 350 X 203 X 188 MM / 13.78 X 8.00 X 7.40 IN

Go to Item

EAH-AZ80

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

True Wireless Noise Cancelling Earphones with Multipoint Bluetooth®

Crystal Clear Sound. Now Wireless.

AZ80's large 10mm drivers, special acoustic structure and category-leading noise cancellation give you exceptional Technics sound – wherever your day takes you. With beautifully crafted comfortable design, seamless device switching and crystal-clear call clarity – you won't miss a beat.

Signature Technics Clear Sound
Experience detailed Technics hi-fi sound with powerful bass. An enhanced low-distortion bass response is achieved with large 10mm free-edge aluminium alloy diaphragms.*

Natural Concha Fit
Low-profile design with natural concha fit – to stay comfortable and in-place throughout even your most active days. AZ80 earbuds are carefully shaped to fit the concha groove just above the ear opening – for a comfortable and secure fit.

Multipoint Connection to 3 Devices
Seamless switching for up to 3 devices* (e.g. PC, smartphone & tablet).
*No LDAC playback with 3 devices.

Pure Listening with Noise Cancelling
Dual Hybrid Active Noise Cancelling tech using feedforward and feedback mics, plus analogue and digital processing – for uninterrupted category-leading hi-fi sound performance.
*Technics research using JEITA guidelines for true wireless noise cancelling headphones as of March 2023.

Never miss a beat.

Superior Uninterrupted Sound & Smart Features

JustMyVoice™ Technology
8 separate mics plus advanced wind noise reduction, to isolate and amplify speech while minimising background noise.
*Performance may be affected by external factors.

Long Battery Life
Up to 7 hours* playback with ANC on, 24 hours back-up with the case. Quick charge for 15 minutes will give you 70 minutes of playback.
*After a full charge, subject to playback volume and other factors.

Control the Sound Around You
Natural Ambient Mode lets you select how much background sound to hear, while Attention Mode focusses on speech.

Convenient Single Earphone Use
Keep one ear open, or charge one earphone while using the other. Customise touch sensors through the Technics app.

Premium Look and Feel
Sleek aluminium trim, with engraved Technics logos, for a reassuringly crafted and tactile experience.

100% Plastic-Free Packaging
New plastic-free packaging. The plant-based bioplastic DURABIO™ is used in the earphones and charging case.

Easy Qi Wireless Charging
Simple fast wireless charging by placing the earphone case on a compatible charger.

Technics Audio Connect App
Easy set-up, battery level check, select EQ sound modes, adjust noise cancelling levels and customise touch-sensors with this intuitive app*.
*Requires Android™ 6.0 or higher with Google Play,™ iOS12 or higher.

IPX4 Water Resistance
With IPX4* water resistance for the real-world – with no worries about rain or intensive workouts in the gym.
*IPX4 compatibility for earphones, not charging case.

Choose the best earphones for you
For high-quality listening, you need earphones that can keep up with your pace. Designed with your comfort in mind, Technics True Wireless earphones give you superior sound wherever you are, whatever you’re doing. Use smart features to switch seamlessly from listening to music to taking a call.

Specs:
• Enhanced low-distortion bass response with is achieved with the large 10mm free-edge aluminium alloy diaphragm structure.
• Featuring an acoustic control chamber for natural mid-range with powerful bass. Plus a harmoniser for low-distortion expansive sound.
• Dual Hybrid Noise Cancelling with feedforward & feedback mics, plus analogue & digital processing – a hi-fi experience.
• Seamless switching for up to 3 devices (e.g. PC, smartphone & tablet).
• JustMyVoice™ Technology with 8 mics & advanced wind suppression, to isolate speech from background noise for clearer calls.

Technical Data:
GENERAL
• Driver Unit (mm): 10 mm (3/8 in)
• Frequency Response: 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps)
• Mic: Monaural, MEMS Mic

• Playback Time with Battery (LDAC):
Earphones:
- Approx. 4.5 hours (NC ON)
- Approx. 5.0 hours (NC OFF)
Earphones with Charging case:
- Approx. 16 hours (NC ON)
- Approx. 17 hours (NC OFF)

• Playback Time with Battery (AAC):
Earphones:
- Approx. 7.0 hours (NC ON)
- Approx. 7.5 hours (NC OFF)
Earphones with Charging case:
- Approx. 24 hours (NC ON)
- Approx. 25 hours (NC OFF)

• Charging Time (25°C/ 77°F)
- Earphones: Approx. 2.0 hours
- Charging case / USB: Approx. 2.5 hours
- Charging case / Qi *With certified Qi charger: Approx. 3.5 hours
- Earphones with Charging case: Approx. 3.0 hours
- Earphones with Charging case / Qi *With certified Qi charger: Approx. 3.5 hours

• Quick Charge (15 minutes, AAC):
- Earphones: Approx. 70 minutes (NC ON)
• Standby Time:
Earphones
- Approx. 9 hours (NC ON),
- Approx. 15 hours (NC OFF, Auto power off does not work)

• Dimensions (W x H x D):
Earphones *with Earpiece M size
- Approx. 22 mm x 27 mm x 24 mm
- Approx. 7/8 inch x 1-1/16 inch x 15/16 inch
Charging case
- Approx. 69 mm x 36 mm x 29 mm
- Approx. 2-11/16 inch x 1-7/16 inch x 1-1/8 inch

• Weight:
- Earphones (one side only: L and R are the same): Approx. 7 g (0.25 oz)
- Charging case: Approx. 50 g (1.8 oz)

• Supplied Accessory:
- USB charging cord: Approx. 0.2 m (0.66 ft) (Input Plug : USB Type-C Shape, Output Plug : USB Type-C Shape)
- Earpieces set : XS1, XS2, S1, S2, M, L, XL (M attached)

Advanced Function
• Bluetooth® Wireless Technology:
- Version: 5.3
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
- Multi-point: Yes(Connect up to 3 devices at a time.)
- Multi-pairing: Yes(Connect up to 10 devices.)
• Water Resistance: IPX4 Equivalent (Earphones only)
• Dual Hybrid Noise Cancelling: Yes

Go to Item

EAH-AZ80

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

EAH-A800

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Headphones with Noise Cancelling and Microphone

A Heritage of Excellence. Indulge in Superior Sound.

Backed by Technics’ legendary sound quality, EAH-A800 headphones feature superior audio, exceptional over-the-ear comfort, and sparkling call clarity for home, work, and travel. Unleash a true high-fidelity sound experience in comfortable headphones.

Hear Every Detail
A clear, immersive sound experience with a sense of range and depth. The PEEK/Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.　LDAC™ high resolution wireless audio* for uncompromised sound quality.
*Delivered in 96 kHz/24 bit LDAC when connected by Bluetooth®.

Speak with Clarity
With 8 distinct mics and advanced wind noise reduction, EAH-A800 transmits your voice clearly on each call; 4 Mic Beamforming and Noise Suppression* Technology isolates and amplifies words while minimizing surrounding noise.
*Varying environmental conditions may affect performance.

Immerse Yourself in Sound
With industry-leading* noise cancelling, EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
*As of Oct 31, 2021, According to research by Panasonic Corporation, measured using JEITA-compliant guidelines in the over-ear style noise cancelling headphones market.

Comfort Fit for Your Every Move
Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Control the Sound Around You

Transparent Mode
Transparent mode comprehensively captures voices and other surrounding sounds, leading to a more natural sound similar to not wearing headphones at all. Captures wide range of sound from low to high frequencies.

Attention Mode
Attention mode reduces unwanted external noise to make it easier to hear people‘s voices. It’s perfect when you need to hear airport announcements, etc.

Personalized Your Sound for All-Day Wear

Technics Audio Connect App*
New Technics Audio Connect app* makes pairing easy, helps tailor noise cancelling and sound mode settings to your exact specifications.
*Compatible with smartphones and tablets that are equipped with Android™ 6.0 or higher and that support Google Play, or an iPhone®, iPad® and iPod Touch® equipped with iOS 12 or higher.

Industry-Leading* Long Battery Life
Get up to 50 hours on a single charge with ANC on, with quick charge of 15 minutes for 10 hours of playback; Wearing Sensor for auto shut-off; folds easily to place in compact carrying case.
*As of Oct 31, 2021, According to research by Panasonic Corporation, based on published playback time (AAC, NC ON) in the over-ear style noise cancelling headphones market.

Seamless Device Switching with Multipoint Pairing

Automatic switching of devices
Multipoint pairing allows you to be connected to two Bluetooth® devices at the same time. With the latest firmware update, LDAC connections are also enabled for Multipoint pairing*.
*Requires the latest version of the Technics Audio Connect App.

Simultaneous pairing with PC and smartphone
If you receive a call on your smartphone while watching a video on your PC*, you can start speaking without having to manually switch between your smartphone and PC.
*Depending on the video playback software, the seamless switch may not activate.

Simultaneous pairing with two smartphones or tablets
When a call on your smartphone ends, you do not have to manually switch back to the other device used for music or video playback.

Convenient Functions

Multi-pairing
Multi-pairing is compatible with the latest version of Bluetooth® technology (Ver. 5.2) and can be used with up to 10 devices.

Wearing Playback Sensor
When the headphones are removed from your head, music stops. When they are put back on your head within 60 seconds, music resumes. Comfortable, seamless operation.

Voice Assistants
You can launch smartphone voice function to select music, adjust the volume, and make phone calls, with your voice.

8 High-performance MEMS microphones

Specs:
• A clear, immersive sound experience with a sense of range and depth. The PEEK/ Polyurethane 3-Layer Diaphragm 40mm driver lets you lose yourself in smooth, detailed highlights and bass.
• With 8 mics and wind noise reduction, EAH-A800 offers superior call quality provided by 4 Mic Beamforming and Noise Suppression Technology to clearly convey your voice to listener.
• EAH-A800 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for immersive listening.
• Designed to fit comfortably over your ear with cushioned, super-soft earpads that evenly distribute pressure for a stable fit, with a headband that reduces pressure across your entire head.

Technical Data:
GENERAL
• Driver Unit (mm): 40 mm (1-9/16 in)
• Impedance: 34Ω
• Sensitivity: 105 dB/mW @1kHz
• Frequency Response (Power ON): 4 Hz -40k Hz
• Mic: Monaural, MEMS Mic
• Playback Time with Battery (LDAC):
- Approx. 40 hours (NC ON)
- Approx. 50 hours (NC OFF)
• Playback Time with Battery (AAC):
- Approx. 50 hours (NC ON)
- Approx. 60 hours (NC OFF)
• Charging Time (25°C/ 77°F): Approx. 3.0 hours (Using the power source 1200 mA or higher)
• Quick Charge (15 minutes, AAC): 10 hours (NC ON)
• Standby Time:
- Approx. 60 hours (NC ON),
- Approx. 120 hours (NC OFF)
*Auto power off : OFF
• Dimensions (W x H x D):
- Approx. 170 mm x 196 mm x 85 mm
- Approx. 6-11/16 inch x 7-11/16 inch x 3-3/8 inch
• Weight: Approx. 298 g (10.5 oz)
• Supplied Accessory:
- USB charging cord: Approx. 0.5 m (1.6 ft) (Input Plug : USB Type-A Shape, Output Plug : USB Type-C Shape)
- Detachable cord: Approx. 1 m (3.3 ft)

Advanced Function
• Bluetooth® Wireless Technology:
- Version: 5.2
- Supported Profiles: A2DP, AVRCP, HSP, HFP
- Codec: SBC, AAC, LDAC
- Operating Distance: Up to 10 m (33 ft)
• Dual Hybrid Noise Cancelling: Yes
• Bluetooth® Multipoint Pairing: Yes

Go to Item

EAH-A800

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

JQ Tape Fleece Jacket

294,95 €*