DJ Equipment 1323 Items

The 12" Record Case is designed to store and transport up to 50 12" records. With its stable construction of aluminium profiles, plastic-coated MDF panels, rivets and a lining of soft foam, the record case offers optimal protection against shocks, light and heat.

The lid of the LP Record Case is firmly installed on 2 sturdy metal hinges. A snap lock provides reliable theft protection. Due to its low dead weight and stable construction, the aluminium record case is an ideal DJ record case that can also be transported regularly without any problems. The box is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Capacity: max. 50 pcs. 12" records
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Non-slip rubber feet
• Dimensions (LxWxH): 36 x 18 x 36 cm
• Weight 2,5 kg

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin Titanium with white HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

Moving Magnet Phono Preamplifier

Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Stage?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• GAIN @ 1KHZ: 39dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: 3.35mV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): ~0.09uV
• RIAA CURVE ACCURACY: +/- 0.65dB 30Hz-20kHz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): >90dB
• THD+N 1KHZ (20-20KHZ BW): <0.0025%
• INPUT IMPEDANCE: 47k Ohm
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @10KHZ: >85dB
• DIMENSIONS (H X W X D): 48x176x132 (1.9x6.9x5.2”)
• WEIGHT: 0.68kg/1.5lbs
• WHATS IN THE BOX: Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum - features/specifications:

• color: silver
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g

The Reloop SPIN cartridge system is suitable for scratching, due to the spherical stylus, and is ideally suited for the portable playback of records. With a high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
• Optimized for portable record playback
• Suitable for scratching due to high tracking ability
• Spherical stylus
• Very low vinyl wearout

TECHNICAL DATA
• Frequency range: 100 Hz - 10 kHz
• Output voltage (3.54 cm/s): 180 - 360 mV
• Tracking force range: 4 - 6 g
• Recommended tracking force: 5 g
• Weight: 1.8 g (+/- 0.5 g)

The Reloop SPIN cartridge system is suitable for scratching, due to the spherical stylus, and is ideally suited for the portable playback of records. With a high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
• Optimized for portable record playback
• Suitable for scratching due to high tracking ability
• Spherical stylus
• Very low vinyl wearout

TECHNICAL DATA
• Frequency range: 100 Hz - 10 kHz
• Output voltage (3.54 cm/s): 180 - 360 mV
• Tracking force range: 4 - 6 g
• Recommended tracking force: 5 g
• Weight: 1.8 g (+/- 0.5 g)

The Reloop Extreme Scratching Set should not be missing from any serious Turntablist DJ setup. The special foil disc is placed between slipmat and turntable to drastically reduce friction. This enables extremely fast scratching where the disc moves almost by itself.

FEATURES
• Consisting of:
• 1x Reloop slipsheet
• 1x Reloop slipmat (extra rigid)
• Made for extreme scratching and backspinning
• Reduces friction between slipmat and turntable plate

Reloop''s slipmats are made of quality felt and facilitate particularly good anti-slipping abilities. Placed between the platter and a record they facilitate scratching and back cueing.

TECHNICAL DATA
• Made of high-quality felt

The Reloop Modular Stand was designed to exactly fit the performance pad controller Reloop Neon, guaranteeing solid foothold with ideal working height. Ideally, the Reloop Modular Stand is positioned near a turntable, allowing comfortable access to the sample, cue, loop and effect sections. Thanks to convenient snap-in knobs, the Reloop Modular Stand's setup is quick and easy. The stand is also compatible with other modular controllers, effect devices or even the iPad and it can also be used in the studio, in order to position your desktop synthesizer or drum machine at an ideal working height.

FEATURES
• Sturdy stand for modular controllers
• Optimized for Reloop Neon
• Quick and easy setup
• No tools necessary for setup
• Locking via snap-in knobs
• Easy setup in two steps
• Extra flat construction
• Ideal working height: perfect for positioning near turntable
• Also compatible with other modular controllers, effect devices, desktop synthesizers, drum machines or iPad

TECHNICAL DATA
• Dimensions (folded): 261 x 22 x 184 mm
• Dimensions (assembled): 261 x 185 x 184 mm
• Weight: 861 g
• Supply without decoration

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

Additionally to the RHP headphones series, Reloop offers an in-ear headphones solution with the INP-9 which can be used as stage or studio monitor alike, as well as bringing a great performance for your mobile media player. Smartphone users will love the integrated phone control for taking calls. And thanks to the integrated microphone you can always leave your phone in your pocket. Two different-sized silicone plugs guarantee high wearing comfort even during long use. Thanks to the especially isolated ear plugs with powerful 10mm drivers ambient noise will remain shut out while the rich sound can unfold. Smart sound by Reloop.

FEATURES
• Professional in-ear headphones
• Special sound isolation ear plugs for crisp sound characteristics
• Perfect ambient noise canceling
• Perfect listening pleasure due to crisp highs and powerfull bass
• High wearing comfort thanks to 2 different silicone plugs
• Phone control incl. smartphone answer with integrated microphone for all current mobile phones with 3.5 mm jack
• Smartphone control
• Ideal for portable media players, smartphones, production and stage monitoring

TECHNICAL DATA
Headphones:
• Frequency range: 10 Hz - 20 kHz
• Impedance: 14 ohms
• Acoustic pressure: 97 dB
• Weight: 15 g

Microphone:
• Directivity: omni-directional
• Frequency range: 50 Hz - 20 kHz
• Impedance: 2200 ohms
• Sensitivity: -65 dB +/-3 dB (at 1 kHz)
• S/N ratio: -58 dB
• Incl. 2 different sized silicone plugs and VoIP adaptor

The RHP-10 Mono is the latest member of the Reloop headphones family, and the first devoted to one-ear monitoring. The single ear-cup construction is designed for fast cueing of a track which, thanks to the large driver, is also possible when the ambient noise levels are high. The ergonomically designed padded handle and the water-resistant ear pad made of artificial leather are intended to withstand demanding live applications. The sturdy XLR cable connection and supplied spiral cable further emphasise the professional approach, allowing for a clutter-free and reliable performance. For fans of one-ear monitoring the RHP-10 Mono is a true and dependable partner.

FEATURES
• Professional one-ear construction with 50 mm neodymium driver
• Ergonomically padded handle
• Swivel-mounted ear cup
• Water-resistant ear pad made of artificial leather
• Flat comfort construction: compact and light ear cup housing
• Sturdy XLR connection
• Excellent, individually adjustable wearing comfort
• 90° angle adapter for optimised cable routing

TECHNICAL DATA
• Frequency range: 30 Hz – 30 kHz
• Impedance: 24 ohms
• Acoustic pressure: 109 dB
• THD: < 0,2% at 1 kHz, 1 mW
• Rated input power: 300 mW
• Weight: 246 g
• Incl. large artificial leather bag for headphones and accessories & cable

MULTI-FUNCTIONAL
The Reloop RMX-44 BT is a 4-channel Bluetooth DJ club mixer in classic design, including a Bluetooth input with cue function, which offers numerous application possibilities. The intuitive Club mixer layout guarantees a simple overview and allows experienced artists to find their way around immediately.

FLEXIBLE USABILITY
With 9 inputs and 4 outputs, as well as a 3-band EQ and bipolar filter unit per channel, the RMX-44 BT is not only a full-fledged DJ club mixer, but thanks to Bluetooth compatibility and the 2-band EQ microphone section with talk-over function, it is also ideal for bars, mobile DJs and home setups.

UNIVERSAL CONNECTIVITY
Thanks to the Smart Connectivity Bluetooth input, Smartphones, laptops as well as iPad’s and other devices can be connected quick and easily. In combination with its numerous other connection opportunities, the RMX-44 BT is up to any challenge and adapts perfectly to any application.

FREQUENCY MIXING IN DIGITAL SOUND ARCHITECTURE
For creative frequency mixing, the RMX-44 BT offers dedicated, bi-polar sound filters per channel to allow smooth low- and high-pass fading. The fully digital sound architecture enhances your sound to be clear and punchy in every situation.

HIGH QUALITY DESIGN
The sturdy metal construction and scratch-resistant surface with a deep black metallic finish make the RMX-44 BT extremely durable, despite frequent use and transport. The fabrication meets the industry’s highest quality standards and is visually and haptically particularly attractive. In addition, the stylish and timeless design blends perfectly into any DJ setup.

FEATURES
• 4-channel Bluetooth DJ club mixer
• 9 inputs, 4 outputs
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs
• Smart connectivity Bluetooth input with cue function
• 3-band EQ
• Sound filter, bi-polar filter unit with LPF and HPF
• High-quality surface in deep black metallic
• Fully digital architecture for outstanding sound
• Sturdy metal construction
• RMX Innofader compatible
• Crossfader curve adjust
• Mic channel with 2-band EQ & talk-over ''Active Ducking Technology'' for mic channel
• Headphones output (6.3 mm jack)
• Incl. power cord, instruction manual

TECHNICAL DATA
• Frequency range 20 Hz – 20kHz
• Inputs: 2x Phono RCA, 6x Line RCA, 1x Mic XLR/Jack
• Outputs: 1 Master XLR (balanced), Master RCA (unbalanced), Booth RCA (unbalanced), Rec RCA (unbalanced), headphones (6,3 mm jack)
• EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
• Dimensions: 320 x 106.4 x 379.4 mm
• Weight: 5,4 Kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/3/243591_Reloop_IM.pdf

chateau vinyl solo | nylon olive stealth edition

chateau vinyl offers a perfectly protected,
shock-absorbing and cushioned space for 75 x 12inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable in different club situations.
each chateau vinyl bag contains the flight cover, an easy, lightweight and highly sustainable
solution to protect and extend the life of your chateau vinyl.
advise to all the flying djs: don't check-in without!

the puristic chateau vinyl solo version comes without the side pouch and docking station.
less is more - if it´s enough for your needs.

_coated water-resistant 2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: certified cordura® nylon, water-repellent
colour: olive

made in germany

35 x 34 x 24 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The UDG Ultimate Phone/ Tablet Stand is a height and angle
adjustable phone/ tablet holder that is designed to provide you
with the most comfortable viewing angle at ergonomic eye-level
height. It’s a well-made and durable phone/ tablet stand with
rubber grips on the holding portion to ensure that the phone/
tablet does not easily slip or fall.
In terms of convenience, this stand is perfect for watching
videos, viewing photos, reading, typing, video recording, and so
on.
FEATURES
• Durable aluminum body, smooth edge, surface polishing process
• Rich adjustment function, can match the use of multiple scenes
• Multi-angle & height adjustable
• Fully foldable, easily picked up with one hand, very handy & light in
weight
• Fully rubber grips on the holding portion protect your devices from slip or
fall
• Works perfectly with tablets, iPad & phones
• Bottom & support surface can be extended
• Reserved space for charging cord to ensure that your device is always
available and help reduce desktop clutter

FOLDED
DIMENSION WIDTH HEIGHT DEPTH
WEIGHT
11.0 2.5 6.7
0.18 kg 0.39 lbs
4.3 0.9 2.6
CM
INCH

The UDG Ultimate Laptop Stand is a portable compact laptop or desk stand with rugged, reliable and ergonomic design for universal use. It is perfect for supporting DJ equipment like laptop, controller, mixer etc. It could be disassembled easily and
is constructed from solid steel with a scratch resistant powder coating and features no-slip support arms.

This table desk stand has 4 line-it-up bars and 2 support bars for with solid adjustable 4 height alignment, comfort, and convenience. Set it low for a minimal clearance of 6.75” or set it up to 11.5” high. The 10.75” long support arms hold gear with a width of 9” or greater and, by adding the included extensions, it can be extended to fit that extra wide 17" laptop or other gear.

The laptop stand design leaves your laptop or other device well ventilated and reduces the risk of overheating.

FEATURES:

• Adjustable height / width
• Fits laptops 13-17 inches, iPads and Controller
• Solid and easy to assemble laptop/controller stand for DJs/Producers
• Safe & reliable device placement
• Rugged, durable metal construction, anti-scratch resistant powder coating
• Stable & ergonomic tabletop design

Dimensions:
28 x 26 x 35 cm (Breite x Höhe x Tiefe)
11 x 10,2 x 13,7 inch (Width x Height x Depth)

Weight:
1,4 kg
3 lbs

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

„Best Buy“ MM/MC phono preamplifier

Setting new standards for entry level phono stages!

Phono Box S was one of our favourite products, it offered unrivalled sonics and versitality at a very affordable price. When we started creating Phono Box S2, its successor, it had to have exactly that but improve on sound even further. Phono Box S2 features incredible micro-details, dynamics and precision with a soundstage usually found in much more expensive products. The new S2 style housing is made of an aluminium/metal sandwich construction and not only offers highest aesthetics but also out-standingly protects it from unwanted electromagnetic interferences and vibrations. This guarantees for an undisturbed listening experience without worries. The switches on the bottom of the unit allow fine tuning the sound to your preferences and adjusting Phono Box S2 to any available cartridge!

Phono Box S was considered the best option of all entry-level phono stages by many acclaimed hifi magazines, Phono Box S2 is sure to follow its predecessor‘s footsteps and will set new standards at this price point!

Compatible upgrade power supply: Accu Box S2

Features:
• Audiophile Performance
• Dual mono configuration
• Audiophile-grade amplification modules
• Audiophile-grade polypropylene WIMA capacitors
• Precise RIAA equalisation
• Switchable Subsonic filter –12dB @ 20Hz
• Switchable input impedance/capacitance
• 4 adjustable gain levels
• Outstanding sound quality
• Available in silver or black

Technical Specifications:
• Input impedance: 10 Ohm/ 100 Ohm/1 kOhm / 47 kOhm
• Input capacitance: 100 pF/ 200 pF/ 320 pF/ 420 pF
• Gain switch: 40 dB/ 43 dB/ 60 dB/ 63 dB
• Subsonic switch: -12 dB @ 20 Hz
• Signal-to-noise ratio: 85 dB
• THD+N: 0.01% MM/ 0.05% MC
• RIAA accuracy: < 0,4 dB / 20 Hz - 20 kHz
• In/Out sockets: 1 pair RCA connectors
• Power consumption: 18 V / 85 mA
• Outboard power supply: 18 Volt DC/ 500 mA
• Dimensions ( W x H x D ): 103 x 36 x 115 mm
• Weight: 570 g net

Dust protection cover

Cover it 1 is a crystal clear acrylic cover for turntables. It protects the turntable & its needle and suits for:
• Ground it deluxe 1
• Ground it deluxe 3
• Ground it Carbon

Turntables:
• Signature 10
• RPM 10 Carbon
• and all smaller Turntables

Technical Specifications:
• Dimensions (WHD): 525 x 290 x 425 mm (Outside)
• Dimensions (WHD): 515 x 285 x 415 mm (Inside)
• Weight 4.3 kg

Bearing lubricant

How to use Grease it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.

Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line.
For non-inverted bearings you should use Lube it.

Features:
• To be used with inverted bearings
• Helps a smooth movement
• Pre-filled syringe
• Easy handling

Amount: 2.3 ml

High-tech lubricant for constant velocity

How to use Lube it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Lube it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some lube off your turntable to keep it looking clean.

Please only use Lube it for turntables like Elemental, Primary, T-Line, Essential, Debut, The Classic, Juke Box & X1/X2.
For inverted bearings like RPM Line, Xtension models and Signature Line please use Grease it.

Features:
• Helps a smooth movement
• Easy handling

Amount: 5 ml

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Hear the vivid sound experience that music playback offers with Nagaoka's MP-110 tonearm. Especially in the high-frequency range, the elliptical needle cut ensures better detail resolution. This creates a live atmosphere while listening, which is otherwise known from concerts.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel Separation (1kHz): >23dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P110
• Cartridge type: without head shell

Despite the tight tolerances of the hole in the center of the vinyl,

(0.286'' +0.001'' / -0.002''),

it sometimes happens that the hole is less than 0.284'' min.

In solution to this problem, we offer you our reamer

STABLE 33.33

Completely redesigned to allow you better control when correcting the diameter in the center of your vinyl, this small tool is very

simple to use.

You can now easily correct this small deviation of the diameter in the center of your vinyls which were too tight to put on your turntable.

Video: https://youtu.be/b8l5BRlgSHM

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

High quality printed ARTS slipmat.

The excellent Dr. Suzuki Slipmats are now available in yellow!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

45 RECOD-BAG 100

The new MAGMA 45 RECORD-BAG 100 is the latest addition to MAGMA’s 45 bag range and perfectly holds up to 100 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. Additional accessories such as headphones, a needle-case and 45-adapters can be stored in the two zippered side-pockets.

FITS:

• 100 x 7” Vinyl-Singles
• 45 Adapters & accessories

BASICS:

• Heavy duty and 100% waterproof 1680D Ballistic-Nylon
• Integrated PVC walls for ultimate protection and stable fit
• Two side pockets fits headphones, needle-case and 45-adapters
• Internal zippered mesh-compartment
• Detachable shoulder-strap

SPECS:

• Outer measures: 29 x 20 x 21 cm (incl. side pockets)
• Inner measures: 19,5 x 18 x 19 cm
• Weight: 0,9 kg

45 Adapter not included.

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Flair for your vinyl. Slide one of our weighted 45 rpm adaptors onto the spindle of your turntable to play your favorite 7”. The heavy duty enameled metal disc comes packaged in our custom muslin pouch, perfect for toting along to a party or your next spin session.

The Kalahari Oyster Cult "Model 01" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Reloop Stand Hub is the industry's first innovative combination of multi-functional laptop stand and advanced USB hub with power delivery port. It is ideally suited for DJs and producers thanks to a stable power supply and networking of hardware peripherals.

FLEXIBLE APPLICATION POSSIBILITIES
The soft contact surfaces protect and provide a non-slip surface for your equipment. The deep black powder coating in a scratch-resistant finish makes the Stand Hub very resistant even when used frequently.

MULTI-FUNCTIONAL
Thanks to the push-lock mechanism, 6 possible setup variants offer a wide range of applications. Due to the space-saving and compact design, these are ideal for use in studio or live setups.

USB POWER DELIVERY
MacBooks and laptops with USB-C power connection can be powered directly from the Stand Hub via the USB-C PD port.

Works as active or passive USB-C / USB-A hub with all laptops.

CONNECTION OF DEVICES
The Stand Hub has 4 high-retention USB-A 3.0 ports, one USB-C port for connecting laptops and smart devices and one USB-C PD port for both, passive and active use.

UNIVERSALLY COMPATIBLE
Macbooks, iPads, notebooks and various other devices (11''-18'') can be easily connected via plug- and-play, thanks to very broad compatibility.

CONNECTIVITY &
PROTECTIVE BAG
Incl. protective bag for safe transportation
of Stand Hub and connection cables:

- USB C to C (30 cm)
- USB C to A (25 cm)
- USB C to A (50 cm)

FEATURES
Industry's first innovative combination of multi-functional laptop stand & advanced USB C-Hub with power delivery support
The ultimate USB hub for DJs, producers & creative minds providing stable power routing and connectivity for all your devices
Flexible assembly with 6 different positions for a wide range of applications and places
Features Laptop Stand:
Multi-functional design for various setups:
1) Classic C-shape: Classic laptop stand configuration
2) Lower C-shape: Optimized for use with keyboard, modular controllers or tablets
3) Z-shape: Stable setup for an optimal working height position
4) Lower Z-shape: Flat design for tablets and controllers
5) Higher-Z-shape: Elevated design of the classic Z-Shape for extended height
6) Transport position: Flat transport size
Space-saving, collapsible and lightweight construction
Swift and tool-free assembly thanks to an easy push-lock mechanism
Soft foam pads to protect your devices and non-slip rubber base for stability
Suitable for all common laptop sizes (11''-18''), tablets, controllers and more
Deep black and scratch-resistant powder coating
Incl. protective bag for safe transportation of Stand Hub and connection cables
Features USB hub:
Designed for DJ and studio setups to optimize your workspace
MacBook Pro and laptops with USB-C power connection can be powered directly from the Stand Hub via the USB-C PD port (3.2 Gen 1, SuperSpeed PD5)
Extend your connectivity: 4x USB-A 3.0 ports for fast data transfer with SuperSpeed support
Can be used in Active or Passive USB hub mode (a USB power supply is recommended for a stable connection; available as accessory)
Plug and play connection without any driver installation
Built-In Short circuit-, overcurrent-, overvoltage- and overheating-protection
Scope Of Delivery: 2x USB-A to USB-C, 1x USB-C to C, transportation bag with zipper, user manual

TECHNICAL DATA
Connections:
1x USB-C 3.2 Gen 1 (SuperSpeed 5 Gbps, for connection to computer)
1x USB-C PD 3.2 Gen 1 (SuperSpeed PD5, for power supplies up to 60 watts)
4x USB-A 3.0 (hub ports in high-retention design / downward compatible)
Laptop Stand Data:
Load capacity: 5 kg
Weight: 1.4 kg
Dimensions: 290 x 250 x 270 mm (w x h x d)
Scope Of Delivery:
Laptop Stand
1 x USB-C to C cable (30 cm)
1 x USB-A to C cable (25 cm)
1 x USB-A to C cable (50 cm)
transportation bag with zipper
user manual: https://www.reloop.com/media/custom/upload/Reloop-Stand_Hub_Instruction_Manual.pdf
video: https://youtu.be/90ZzzxBOzho

Rubber ring for Concorde cartridge
Rubber rings function is to prevent over-tighten of the cartridge assembly on the tonearm, over-tighten can push the tonearm contacts back. The rubber ring should be pushed to the base of the cartridge assembly, position between the cartridge connector(rare) and the tonearm.

Height: 0.8 mm

Rubber rings, pair

Lead Wires, set, 4 PCs

Ortofon HiFi Maintenance set
Comprises 1 PC fibre stylus brush and 1 PC screwdriver in a plastic cylinder.

Styli protection caps, pair

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

OM Pro S pre-mounted on SH-4 Black
The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

OM Pro S technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 5 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5,0 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g
Replacement stylus unit - Pro S

With the recordcase TP-70 XT Zomo has a DJ case in the range which due to its integrated wheels and its generous trolley frame can be rolled very comfortable to the set.

Inside there is space for approximatelly 70 records and the separated side
partitions can hold a micro, mobile phone etc.

Features Zomo Recordcase TP-70 XT
•3 solid wheels
•cool Design
•solid aluminium
•aluminium profiles
•chrome angles
•light weight
•comfortable handle
•lockable butterfly (Vorhängeschloss )
•50/50 devide
•interior foam

Details
•Capacity: approx. 70 LPs
•Size: 485 x 270 x 410 mm
•Weight: 5,9 kg

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

The OP Art 2 Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The Ruthless Records Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

The OP Art 4 Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!